Quality Control Technician Jobs in Broken Arrow, OK

Quality Control Inspector I Salary: $32.19 USD/hour Contract Duration: 1 Year + Unique Skills: • Must have aerospace sheet metal and composite experience • Candidates must have prior to recent work experience with, structures/composite build inspection • First Shift Experience/Education: • High School Diploma or GED required • 1 year quality inspection experience or 2 years GAC manufacturing experience required • 2 years manufacturing experience or equivalent aerospace experience preferred • Other Formal Inspection Training Program 90 Days required Position Purpose: In a team-oriented environment, perform all tasks in initial phase manufacturing, composites, final phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Essential Duties and Responsibilities: 1. Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents 2. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps 3. Perform conformity/first article inspections to ensure compliance with FAA approved procedures 4. Ensure the proper use and storage of area tools and equipment 5. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level 6. Provide technical support to manufacturing personnel 7. Perform area inspections to ensure compliance with applicable standards and specifications 8. Participate in continuous improvement activities Other Requirements: 1. Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation 2. Competent in the use of basic shop tools and equipment To apply please email your resume to Cherise at: cunnerstall@cantech.agency

Cross Country Allied is seeking a travel Cath Lab Technologist for a travel job in Muskogee, Oklahoma. & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel Job Description As a cardiac cath lab technologist, you'll assist with catheterization of the heart and other electrophysiology procedures. Working in an operating room, cardiac cath lab or similar healthcare facility, you'll prepare equipment, assist surgeons, monitor patient vitals, help maintain sterile conditions and more. You might care for patients undergoing angioplasty, stent implantation, ablation, fluoroscopy or other procedures. Minimum Requirements At least 1 year of recent acute care experience as a cardiac cath lab technologist ARRT Certification BLS Certification (AHA) Current state license Benefits The benefits of taking a travel allied job with Cross Country include: Private housing or generous housing allowance Comprehensive health insurance with prescription coverage Dependent health insurance with prescription coverage Competitive salaries Referral bonuses Travel reimbursement 401(k) retirement plan Direct deposit/free checking Unlimited free CE credits Cross Country Allied Job ID #1090164. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RAD - CCL TECH Cardiac Cath Lab Technologist. About Cross Country Allied Applicants must have at least 1-2 years of POST CLINICAL work experience Craving an adventure? Travel with us to a facility out of town or out of state and explore new ways to broaden your horizons, both on the job and off. Long-and short-term assignments are available. Want to work close to home? We have plenty of local opportunities as well. You could even work from home with our teletherapy options. Join our team and choose from a variety of assignments across the country or close to home. You can customize a career path for every stage of life Benefits 401k retirement plan Referral bonus

$17.50/hour ($16.00/hr base pay plus 1.50/hr shift pay) Responsible for monitoring NSP's Quality Assurance Program, maintaining Quality Standards and Quality Integrity for NSP. Ensuring that daily production operates within company and customer standards. Capable of making decisions based on standards provided by NSP QA Management. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential functions include, but are not limited to the following: Monitor production processes to ensure compliance with food safety regulations (USDA, GMP, HACCP) and company policies. Perform routine quality checks on raw materials, in-process products, and finished goods to ensure they meet quality standards. Maintain accurate and up-to-date records, including quality control logs, inspection reports, and food safety documentation. Ensure that all documentation complies with regulatory and audit requirements. Assist with the preparation and submission of reports for internal and external audits. Perform routine product testing, such as temperature checks, pH testing, moisture analysis, and weight checks. Ensure that all test results are within specified limits and notify the FSQA Supervisor of any deviations. Ensure that all products comply with USDA, GMP, and other relevant regulations. Assist in implementing and maintaining company policies and procedures related to food safety and quality. Stay current with regulatory updates and industry standards to ensure ongoing compliance. Work closely with production and sanitation teams to ensure food safety and quality standards are met throughout the processing stages. Provide feedback and support to production staff on quality control and food safety practices. Communicate any quality or safety concerns to the appropriate department promptly. Provide guidance on proper handling, storage, and processing of raw materials and finished products to maintain food safety and quality. Other duties as assigned. QUALIFICATIONS (Knowledge, Skills, and Experience) High school diploma or GED required; an associate's or bachelor's degree in food science, microbiology, or a related field is a plus. Previous experience in food safety, quality assurance, or similar roles in the meat processing or food manufacturing industry is preferred. Strong working knowledge of Quality Systems including HACCP, SPC, GMP, SSOP and food safety regulations is preferred. Strong attention to detail and the ability to follow strict procedures and guidelines. Basic computer skills for data entry and record keeping. Good communication skills and the ability to work effectively in a team environment. Ability to work in cold and/or refrigerated environment. Ability to work in a fast-paced and regulated environment. Ability to read, write and communicate in English with strong verbal communication skills. Knowledge of Spanish is helpful, but not required. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to have a full range of body motion including twisting, bending, reaching outward, pushing, pulling, intensive hand/wrist movement and lifting to meet the NSP minimum required pounds per day which is up to 50 pounds (unassisted). The employee must be able to walk and stand for a significant amount of time on even concrete surfaces, which may at times be slippery due to marinades, water, and other liquids associated with the production process. Due to noise levels in the work environment, the use of hearing protection is required. The employee must have good, corrected vision to see details at close range or at a distance. The employee will be working in a climate-controlled environment of -40ºF to -45ºF. The employee may be exposed to strong odors such as raw meat and marinades from seasoned meat. While in the production area, the employee is required to wear Personal Protective Equipment (PPE) to include hair and beard nets, rubber soled shoes, smocks, hearing protection and hard hats.

Aviation Technology Associates (AVTECH) is looking for a QC Inspector I in Tulsa, OK. Shift: First (05:00 to 15:30); other shifts may be available Pay Rate: $32.19 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School degree or GED. Completion of formal inspection training program within 90 days of assignment. One (1) year quality inspection experience or two (2) years aerospace manufacturing experience. Two (2) years manufacturing experience or equivalent aerospace experience preferred. Valid driver's license required. Unique Skills: Must have recent experience with structures/composite build inspection. Aerospace sheet metal and composite experience preferred. Purpose: In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Essential Functions and Responsibilities: Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Provide technical support to manufacturing personnel. Perform area inspections to ensure compliance with applicable standards and specifications. Participate in continuous improvement activities. Perform other duties as assigned. Other Requirements: Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. Competent in the use of basic shop tools and equipment. By submitting your resume, you are agreeing to have AVTECH submit an application on your behalf to the company we are hiring for. Must be a US citizen or permanent resident.

Who We Are HSM Transportation is an ISO Certified exclusive complete line manufacturer of C.E. White School Bus Seats, portable child restraints, seat covers, and foam aftermarket parts. We are also a premier commercial seat manufacturer specializing in luxury full-size, luxury shuttle, commuter transit, commuter van, salon, foldaway and sofa seating. HSM Transportation Solutions is a business unit of HSM, headquartered in Hickory, NC since 1944. Our commitment to excellence goes far beyond our products and processes; it is centered on the people who make it all possible. If you're interested in learning more about our company culture, as well as the benefits we offer our employees, please visit our website or social media pages. Responsibilities Conduct comprehensive inspections of raw materials, in-process components, and finished products to verify compliance with quality standards and specifications. Utilize a range of testing equipment and techniques to ensure product quality and performance. Perform regular audits of production processes to identify areas for improvement and ensure adherence to standard operating procedures (SOPs). Work closely with production and engineering teams to address and rectify any quality-related issues. Identify and document any product defects or non-conformities, accurately recording findings and providing timely reports to relevant stakeholders. Collaborate with cross-functional teams to implement corrective and preventive actions. Maintain accurate and organized records of quality inspection results, testing procedures, and other relevant data. Ensure that all quality-related documentation is up-to-date and readily accessible. Participate in quality improvement initiatives, contributing ideas and suggestions to enhance production processes and product quality. Assist in the implementation of best practices to achieve continuous improvement. Ensure compliance with ISO standards and other relevant quality and safety regulations. Promote a culture of safety and quality consciousness among all employees. Qualifications Associate's degree in a related field is a plus. Proven experience (typically 2+ years) in a quality control or quality assurance role, preferably in a manufacturing environment. Strong knowledge of quality control principles, inspection techniques, and testing procedures. Familiarity with using various testing equipment and tools for quality assessments. Meticulous attention to detail and a commitment to delivering high-quality products. Excellent organizational skills to maintain accurate records and documentation. Strong communication and interpersonal abilities to collaborate effectively with cross-functional teams. Proficiency in using computer software and applications related to quality control. Top Benefits As a Quality Control Technician at HSM, you'll enjoy: 401k Contribution Match up to 4% (100% Vested from Day 1), 9 paid holidays, 104 hours of Vacation (Prorated after 480 hours), Affordable Total Package Benefits offerings for you and your family, On-Site No-Cost Medical Clinics for you and Covered Dependents, Teladoc 24/7 ($0 copay), Global Healthcare and Tuition Reimbursement & Professional Development Assistance. Company Summary At HSM Solutions our culture is built on a foundation of teamwork, innovation, and celebrating our successes together as a team. We provide our employees with the tools and resources they need to achieve their goals and to make a meaningful impact on our customers, our company, and our communities. If you're looking for a place that's not just a job, but a spot where you can grow and make a real impact, then HSM Solutions is the place for you. Contact Information If you would like to apply for a position, please visit our career site at **************************** for a prompt response from our recruitment team. If you have any questions or would like to follow up on your application, please don't hesitate to contact us at *********************. If you can't find a job opening that aligns with your skills and interests, Join our talent network today! to stay informed about the latest company news, upcoming events, and new career opportunities that are tailored to your unique talents. Simply sign up today to get started! EEOC HSM prohibits discrimination based on any protected status, workplace harassment/bullying, and retaliation for filing a complaint or providing information related to a complaint. HSM provides equal employment opportunity to all employees and applicants without regard to an individual's protected status: race/ethnicity, color, national origin, ancestry, sex/gender, gender identity/expression, sexual orientation, marital/parental status, pregnancy/childbirth or related conditions, religion, creed, age, disability, genetic information, veteran status, or any other protected status.

JOB TITLE: Aircraft QC Inspector I PAY RATE: $32.18/hour MUST BE US PERSONS We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients’ teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Shift: 1st Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Summary: Work in a team environment to inspect aircraft parts, sub-assemblies, and installations across Initial Phase Manufacturing, Composites, and Final Phase to ensure compliance with type design data. Perform inspections using engineering drawings, work instructions, and technical specifications. Conduct preliminary, progressive, and final inspections of structures and systems, verifying functionality and checking for FOD. Witness, verify, and document manufacturing process steps. Perform conformity and first article inspections per FAA-approved procedures. Ensure proper use and storage of tools and equipment. Promote workplace and product safety, report hazards, and support risk reduction efforts. Provide technical support to manufacturing personnel. Conduct area inspections to ensure compliance with standards. Participate in continuous improvement initiatives. Perform other duties as assigned. Required Skills: High School Diploma or GED required. 1 year of quality inspection experience or 2 years of GAC manufacturing experience required. 2 years of manufacturing or equivalent aerospace experience preferred. Completion of a Formal Inspection Training Program within 90 days required. Proficiency in shop mathematics and blueprint reading (CATIA preferred). Competence in using basic shop tools and equipment. About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights—apply today!

At Botanic Tonics, we know our world is fast, noisy and distracting. It can easily leave us feeling tied up, strung out and not ourselves. Maybe you think the more supercharged you are, the better you'll be. Maybe escape is the only way for you to truly feel free. We're not judging - we just have a different point of view. Because we're not a fuel for keeping pace with the rat-race of every day. We're not an elixir that transports you through the clouds to a tranquil place. We're kava products with blends of other naturally active ingredients, designed to bring you down to earth and into the present, so you can make the most of every moment. Why waste effort trying to quiet the noise when you can tune into it, to hear the one voice that matters? We believe choosing to engage with the here and now is more fulfilling. It makes us feel good, enriches our lives, and brings out our best selves. Be Present. Be You. When you can truly be there, you feel free. Overview The CO2 Extraction Technician is responsible for operating and maintaining CO2 extraction systems used in the production of high-quality botanical extracts. This role involves the extraction of plant material using supercritical CO2 to produce oils, concentrates, and other derivatives. The technician will ensure that all processes comply with company standards, safety regulations, and quality assurance protocols. The position requires a combination of technical skills, attention to detail, and adherence to industry best practices to produce safe, effective, and consistent products. Key Responsibilities CO2 Extraction Operation: Operate and monitor supercritical CO2 extraction equipment to extract oils and other concentrates from plant materials. Ensure the extraction process is carried out according to established procedures and safety guidelines. System Maintenance & Troubleshooting: Perform routine maintenance on CO2 extraction systems to ensure optimal performance. Troubleshoot and resolve any mechanical, electrical, or process-related issues that may arise during production. Quality Control: Monitor extraction processes to ensure consistent product quality. Collect and analyze sample extracts, adjusting parameters as necessary to maintain product specifications. Record data for tracking yields, temperature, pressure, and other key metrics. Safety Compliance: Adhere to all safety protocols and standards, including proper handling of CO2 and any other hazardous materials used in the extraction process. Participate in safety audits and inspections as required. Equipment Setup and Calibration: Set up, calibrate, and prepare extraction equipment prior to production runs. Ensure equipment is clean and properly configured to meet production needs. Record Keeping & Documentation: Maintain accurate production logs, including daily operational data, maintenance records, and any issues encountered during extraction processes. Ensure compliance with regulatory requirements for product traceability and quality assurance. Collaboration with Other Departments: Work closely with quality control, laboratory, and production teams to ensure the final product meets all quality standards and specifications. Process Optimization: Identify and suggest improvements for extraction processes to increase efficiency, product yield, and quality while minimizing waste. Inventory Management: Assist in the monitoring and management of raw materials, such as plant material and CO2. Qualifications Strong understanding of CO2 extraction principles and equipment. Ability to troubleshoot and repair mechanical and electrical issues in extraction equipment. Knowledge of safety protocols and environmental regulations related to CO2 and extraction processes. Excellent attention to detail, with the ability to work under pressure in a fast-paced environment. Good communication skills and the ability to work collaboratively within a team. Education and Experience: High school diploma or equivalent required. Associate or bachelor's degree in engineering, Chemistry, Biology, or a related field is preferred. At least 2 years of production management experience. Prior experience with supercritical CO2 extraction or botanical material processing is highly desirable. Physical Requirements: Must be able to lift up to 50 pounds. Relocation Relocation assistance is available for candidates with experience in CO2 extraction process or other botanical extraction production Botanic Tonics is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, veteran status, marital status, gender identify, sexual orientation, national origin, liability for military service, or any other characteristic protected by applicable federal, state, or local law. If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. Botanic Tonics reserves the right to defer or close a vacancy at any time.

*THIS IS NOT A FULL TIME ROLE || THIS IS A 1099 CONTRACTOR OPPORTUNITY FOR TULSA, OKLAHOMA* Responsibilities: Conduct on-call inspections of Gas Compressors at the designated site. Ensure compliance with industry standards, safety regulations, and client specifications. Document and report inspection findings in a detailed manner. Participate in the Pre-Inspection Meeting (PIM) scheduled for February 24, 2025. Provide valid documentation of educational and technical certifications. Additional Requirements Must be locally based in Oklahoma (or nearby regions) to minimize travel expenses. Should be available for 40 days of inspections over a period of 5 to 6 months. Must submit a detailed CV (8 to 10 pages in Word format) along with valid copies of certifications. Technical Qualifications and Certifications: Minimum 10 years of experience in Pressure Vessel inspections with strong familiarity in Gas Compressor inspections. Strong background in pressure vessel inspections, specifically for filter vessels. Degree or diploma in a relevant engineering or technical field. Expertise in Gas Compressor inspections. Extensive experience in inspecting Gas Compressors and Pressure Vessels and welding inspections. Regulatory compliance checks in accordance industry code standards Mandatory Certifications: Internationally recognized certifications Non-Destructive Testing (NDT) Certification: (ASNT Level II) Welding Inspection Certification (CWI) Coating Inspection Certification: AMPP (NACE), Preferred: API 510 NOTE Contract Type: 1099 contract (Part Time) CURRENT OPPORTUNITY is Initial inspection Meeting. On-call visits totaling 40 days over a period of 5 to 6 months. Shift Hours: To be determined based on inspection schedule. || Tentative Pre-Inspection Meeting (PIM) Date - February 24, 2025. || Please note-in 1099 Contracts, shift hours are different for each client. Work Location: Tulsa, Oklahoma 74146 Compensation: $24.00 - $38.00 per hour About Us Since 1984, Pro QC International goes above and beyond the traditional roles of quality control. We assist clients to put better quality products on the market by resolving quality and production related challenges and reducing supply chain risk and cost. Pro QC offers solutions in over 88 countries. We manage our global operations from 18 Offices Worldwide. Our clients range from small start-ups to multinational companies in the Americas, Europe, Asia, the Middle East and Africa. Join Our Team We are always looking for talented candidates in Asia, Americas, Europe, Middle-East, and Africa. At Pro QC, we value quality over quantity. We value professionalism, dependability, and teamwork. We believe in building trusted partnerships that are earned through conscious efforts. In our strive for excellence, we are passionate about delivering quality solutions to organizations around the world. Leveraging an ever-expanding, interconnected group of people from diverse backgrounds, Pro QC offers an attractive and unique opportunity as part of a global family. Our Vision: To nurture the trust of our customers and our team through dynamic interactions, creative supply chain solutions, and integrated partnership.

+ Maintains and repairs machinery such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment. Performs maintenance and repairs to physical structures of facility. + Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. + The requirements listed below are representative of the knowledge, skill, and/or ability required. + Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Experience:** + Minimum three to five years related experience and/or training; or equivalent combination of education and experience. **Skills:** **Language Skills:** + Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. + Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. + Bilingual (English Spanish) preferred. **Mathematical Skills:** + Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. + Ability to compute rate*** ratio, and percent and to draw and interpret bar graphs. **Education:** + Minimum High school diploma or general education degree (GED) **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Title: QA Technician Pay: $17.50 (includes shift differential) Hours: 2nd Shift - 3:00 PM to 12:00 AM (with OT as needed) Job Type: Temp-to-Hire We are seeking a detail-oriented QA Technician to join our team in Owasso. The QA Technician will be responsible for monitoring production processes to ensure compliance with food safety regulations (USDA, GMP, HACCP) and company policies. You will perform routine quality checks, maintain accurate records, assist with audits, and collaborate with production and sanitation teams to maintain food safety and quality throughout the processing stages. Key Responsibilities · Monitor production processes to ensure compliance with food safety regulations (USDA, GMP, HACCP) and company policies. · Perform routine quality checks on raw materials, in-process products, and finished goods to ensure they meet quality standards. · Maintain accurate and up-to-date records, including quality control logs, inspection reports, and food safety documentation. · Ensure that all documentation complies with regulatory and audit requirements. · Assist with the preparation and submission of reports for internal and external audits. · Perform routine product testing, such as temperature checks, pH testing, moisture analysis, and weight checks. · Ensure that all test results are within specified limits and notify the FSQA Supervisor of any deviations. · Ensure that all products comply with USDA, GMP, and other relevant regulations. · Assist in implementing and maintaining company policies and procedures related to food safety and quality. · Stay current with regulatory updates and industry standards to ensure ongoing compliance. · Work closely with production and sanitation teams to ensure food safety and quality standards are met throughout the processing stages. · Provide feedback and support to production staff on quality control and food safety practices. · Communicate any quality or safety concerns to the appropriate department promptly. · Provide guidance on the proper handling, storage, and processing of raw materials and finished products to maintain food safety and quality. · Perform other duties as assigned. Requirements and Qualifications · High school diploma or GED required; an associate's or bachelor's degree in food science, microbiology, or a related field is a plus. · Previous experience in food safety, quality assurance, or similar roles in the meat processing or food manufacturing industry is preferred. · Strong working knowledge of Quality Systems including HACCP, SPC, GMP, SSOP, and food safety regulations is preferred. · Strong attention to detail and the ability to follow strict procedures and guidelines. · Basic computer skills for data entry and record keeping. · Good communication skills and the ability to work effectively in a team environment. · Ability to work in cold and/or refrigerated environments. · Ability to work in a fast-paced and regulated environment. · Ability to read, write, and communicate in English with strong verbal communication skills. · Knowledge of Spanish is helpful, but not required. Job Order # 120463

Job Details NAPCO Precast BA - Broken Arrow, OK $18.00 - $20.00 HourlyDescription Perform inspections, checks, tests, and sampling procedures of incoming and outgoing materials, parts and finished Precast Concrete. PRIMARY RESPONSIBILITIES Conduct and document process and system audits using written procedures as audit standards. Accurately document the results of the inspections and testing. Maintain all controlled document files and test records in a timely and accurate manner. Coordinate calibration of all test equipment and fixtures Qualifications KNOWLEDGE AND SKILL REQUIREMENTS High School Diploma or GED equivalent Basic computer skills required. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to apply mathematical operations to daily tasks, determine test reliability and validity, analysis. Ability to read blueprints & tape measure PHYSICAL REQUIREMENTS Must be able to work outside in a construction environment The ability to lift, bend, stretch, twist, or reach with your body, arms, and/or legs The ability to exert maximum muscle force to lift, push, pull, or carry objects. Be on Feet 8 to 12 hours shifts Work overtime and work mandatory Saturdays when scheduled Must be able to climb ladders and not be afraid of heights NOTE: This document describes the position currently available. It is not an employment contract. NAPCO reserves the right to modify. This job description is not intended to be all inclusive but is intended to describe the general nature & level of work being performed by people assigned to this classification. It is not to be construed as an exhaustive list of all the responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform other related duties outside of their normal responsibilities from time to time as needed to meet the ongoing needs of the organization.

Shiraz - Quality Control Inspector Summary: Perform in-process and final inspections of electro-mechanical assemblies. This typically includes various mechanical assemblies, piping, brackets and wiring, lighting, boxes, etc. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering drawings and Customer specifications. Must have weld inspection experience. AWS D1.1 experience is preferred. Working knowledge of Nondestructive Examinations and Powder Coating. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Mag Particle Inspection, preferred. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPUTER SKILLS Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. EDUCATION and/or EXPERIENCE High school diploma or GED. Experience with calibration of inspection and test equipment preferred. Experience in an ISO 9001 environment preferred. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Non-Destructive Testing Certification preferred. Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT certified. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee regularly is required to stand and walk. The employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and color vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts in a fabrication shop environment. The noise level in the work environment is usually loud. The employee is subject to extreme weather conditions of temperatures above 100 degrees Fahrenheit and/or below 32 degrees Fahrenheit for periods of more than one hour. The employee should also consider the effect of other environmental conditions, such as wind, precipitation, and humidity.

The Role Perform in-process and final inspections of electro-mechanical assemblies. This typically includes various mechanical assemblies, piping, brackets and wiring, lighting, boxes, etc. What you will be responsible for: * Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. * Must be able to effectively use, read and interpret a tape measure. * Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. * Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. * The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. * Must be able to read and interpret Engineering drawings and Customer specifications. * Must have weld inspection experience. AWS D1.1 experience is preferred. * Working knowledge of Nondestructive Examinations and Powder Coating. * Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. * Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. * Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. * Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. * Mag Particle Inspection, preferred. COMPETENCY OR POSITION REQUIREMENTS * Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. EDUCATION AND EXPERIENCE * High school diploma or GED. Experience with calibration of inspection and test equipment preferred. * Experience in an ISO 9001 environment preferred. * Non-Destructive Testing Certification preferred. * Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT * certified. What we offer YOU: At Kelvion, we take your well-being seriously. Our comprehensive benefits package includes options for medical, dental, vision, life insurance, short-term and long-term disability insurance, Paid Time Off, and holidays. We also help you plan for retirement by offering a 401(k) Retirement Savings Plan with a company match. At Kelvion we thrive on collaboration, embracing diversity of thought, and valuing every voice. Within Kelvion creativity shines because people are listened too, their contributions recognized, and their ideas welcomed. Our flexible approach to the way we work, places people's health and satisfaction as a priority, enhancing engagement and fostering career opportunities. We empower engaged individuals to grow, progress and carve their own paths within the company. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. If you need assistance with this application or a reasonable accommodation due to a disability, you may contact us at **********************. This email address is reserved for individuals with disabilities in need of assistance and is not a means of inquiry regarding positions or application status. We are unable to sponsor or take over sponsorship of an employment visa for this role at any time.

Your Job We are seeking a highly skilled and motivated Quality Control Inspector to join our Quality Control team at John Zink in Tulsa, Oklahoma. As a Quality Control Inspector, you will play a crucial role in ensuring the quality of our products. Your expertise in various codes, standards, quality documentation, mechanical assembly, instrumentation, and electrical systems will be invaluable in maintaining the highest level of quality assurance. Our Team Join the team at John Zink and be part of their ongoing growth and transformation into a world-class manufacturing facility in Tulsa. John Zink is renowned for its commitment to safety, environmental excellence, innovation, and exceptional customer service. This is an excellent opportunity for individuals looking to contribute to a well-established and expanding manufacturing facility and test center Shift: First What You Will Do Collaborate with the line lead to understand the daily agenda and attend morning QC team meetings to discuss the day's plan, workload, and any assistance needed. Report non-conformances daily and communicate issues quickly to prevent project delays. Conduct in-process and final inspections, performing visual and dimensional inspections of products/materials to ensure compliance with specifications and standards. Verify that all project requirements are met, sign off on inspection tasks progressively, and collect and review various reports (e.g., MTR, blast and paint, FAT). Compile, review, and maintain project/product and Quality documentation, including updating in-process data books and uploading inspection photos daily. Witness required factory acceptance testing and assist with customer inspections. Accompany third-party inspectors during site visits to ensure smooth operations. Who You Are (Basic Qualifications) Demonstrated experience working with AWS codes, ASME codes, API codes and other relevant standards. Working knowledge and practical experience in dimensional inspection techniques What Will Put You Ahead Possess a current American Welding Society Certified Welding Inspector (CWI) certification. • Background in electrical systems Current AMPP (NACE) CIP level 1 or higher certification Current API 936 or API 982 Refractory certification At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are As a Koch Engineered Solutions company, John Zink Hamworthy Combustion (JZHC) is a global leader in emissions control and a pioneer in modern Smart Combustion solutions. Our research and development facilities make up the largest testing complex of its kind. Additionally, our worldwide service organization is the largest, most technically advanced team of its kind. We provide solutions to capture emissions, destroy pollutants, manage waste and heat vital processes to help industries operate more cleanly and efficiently. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here , aquí , or tu ). #LI-CG1

Volt is immediately hiring for an entry level Warehouse / Quality Inspector Trainee for a large aerospace company located in Broken Arrow, OK. As an entry level Warehouse / Quality Inspector Trainee you will: Perform quality inspection (visual and dimensional) inspection of mechanical parts Will utilize measuring equipment like calipers, micrometers, gauges and various hand tools Document quality results into MS Excel and ERP systems, while running reports from time to time Will train to operate a forklift in the warehouse Other duties as assigned This is a full time opportunity, 1st shift. Position is long term temp, possible temp to hire. The ideal candidate will have: Strong knowledge of MS Excel and computer skills Strong communication skills 0 - 1 years of experience in any field, will even consider recent high school graduates who are trainable Pay Rate: 14-19 /hr *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please click here or call (866) -###-####. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -###-####. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws

Compensation: $32.19/hr ST, $48.29/hr OT Aerospace sheet metal and composite experience preferred. In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Principle Duties and Responsibilities: Essential Functions: Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD, and verify paperwork. Witness, verify, and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA-approved procedures. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees' health and safety, product safety, and promotes risk reduction; participate openly in safety-related event investigations and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: Provide technical support to manufacturing personnel. Perform area inspections to ensure compliance with applicable standards and specifications. Participate in continuous improvement activities. Perform other duties as assigned. Job Requirements: High School Diploma or GED required. 1 year of quality inspection experience or 2 years of GAC manufacturing experience required. 2 years of manufacturing experience or equivalent aerospace experience is preferred. Other Formal Inspection Training Program 90 Days required. Other Requirements: Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. Competent in the use of basic shop tools and equipment.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? * Essential Job Functions: * Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). * Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). * Ensure all products conform to the customer specifications as outlined in SAP system. * Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. * Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. * Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. * Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. * Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. * Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. * Perform analytical tests required to qualify ingredient batches for production. * Perform production line checks at specified intervals. * Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. * Maintain laboratory cleanliness at all times. * Report all out of specification results to designated leadership. * Complete special projects and other reasonable duties as assigned by leadership. Required Skills: * Working knowledge of Excel, Word, and SAP preferred. * Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. * Organized and detail oriented, adaptable to change. * High level of precision and accuracy in inspection and testing processes. * Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations * Understanding of Food Safety Requirements. * Able to read and understand metric system. * Food or beverage laboratory experience preferred. Competencies: * Technical: Skilled in maintaining accurate and detailed records of inspections and tests * Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. * Adaptability: Flexibility to adapt to changing production environments and requirements. * Communication: Clear and concise communication with production staff and management Education and Experience: * Highschool diploma or equivalent. * 1 - 3 years of experience in Quality within a manufacturing environment preferred. * In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: * Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. * Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: * 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X * Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. * Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: * Medical/dental/vision insurance * Life insurance * 401(k) savings plan with company match * Paid holidays and vacation * Well-being benefits * Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages, Inc. Refresco Beverages, Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages, Inc., and have been engaged in a search shall submit résumé to the designated Refresco recruiter or, upon authorization, submit résumé to this career site to be eligible for placement fees. Criteria Behaviors Dedicated: Devoted to a task or purpose with loyalty or integrity Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Team Player: Works well as a member of a group

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ensure all products conform to the customer specifications as outlined in SAP system. Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. Perform analytical tests required to qualify ingredient batches for production. Perform production line checks at specified intervals. Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. Maintain laboratory cleanliness at all times. Report all out of specification results to designated leadership. Complete special projects and other reasonable duties as assigned by leadership. Required Skills: Working knowledge of Excel, Word, and SAP preferred. Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. Organized and detail oriented, adaptable to change. High level of precision and accuracy in inspection and testing processes. Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations Understanding of Food Safety Requirements. Able to read and understand metric system. Food or beverage laboratory experience preferred. Competencies: Technical: Skilled in maintaining accurate and detailed records of inspections and tests Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. Adaptability: Flexibility to adapt to changing production environments and requirements. Communication: Clear and concise communication with production staff and management Education and Experience: Highschool diploma or equivalent. 1 - 3 years of experience in Quality within a manufacturing environment preferred. In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: Medical/dental/vision insurance Life insurance 401(k) savings plan with company match Paid holidays and vacation Well-being benefits Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages, Inc. Refresco Beverages, Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages, Inc., and have been engaged in a search shall submit résumé to the designated Refresco recruiter or, upon authorization, submit résumé to this career site to be eligible for placement fees.

The in-process quality assurance monitors the assembly of NAP equipment and ensures quality procedures are adhered to. Essential functions To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Maintain a safe and clean working environment by complying with procedures, rules, and regulations. Review engineering equipment submittals prior to and during equipment assembly. Ensure manufacturing instructions are being followed. Physically inspect equipment in production, and any other equipment as directed by management, on a daily basis to ensure problems are solved during production. Review submittals daily. Assist various production departments as needed (panels, wiring, piping, top-out, etc.) Monitor all equipment assemblies in production (i.e., NAP equipment, condensing units, chillers, and any other equipment as directed by management.) Participate in teams to improve design and functionality of equipment (KATA and Continuous Improvement Initiatives.) Work with all departments on obtaining information. Work with all departments on creating in-process quality assurance policies and procedures. Attend work as outlined in Employee Handbook and/or specified by your manager. Complete other tasks as directed by the manager. Comply with government regulations, laws, company policies, and company procedures. Desired qualifications Education: A high school level of education is mandatory for this position in order to continue upward advancement in the company. The employee must be able to understand directions from supervisors and managers, as well as give out precise and accurate information to all departments. Experience: at least 2 years in manufacturing Skills: Ability to use Microsoft productivity software. Self-motivated. Effective oral and written communication skills. Mechanical & technical aptitude. Alertness & precision working with tools. Basic computer & math skills are required. Knowledge of assembly and servicing of refrigeration and HVAC equipment. Ability to communicate in a diplomatic and positive manner at all levels of understanding (entry-level to engineering). Certificates, licenses or training: High School Diploma or better, Refrigeration certification or degree preferred, and/or OJT. Interaction with others Answers to the Quality Supervisor. In constant communication with other departments, primarily in the final assembly area and engineering. It is essential that the employee is able to work with all employees of the RAE team and shows a spirit of cooperation with others in the organization. working environment Work is performed in an industrial production area for a manufacturer of refrigeration and HVAC equipment. The employee is constantly exposed to moving mechanical parts and vehicles. The noise level in the work environment is high in some areas. Exposed to extreme temperatures in both winter and summer. Possible stress caused by the pressure of meeting deadlines and product quality standards. Seasonal variations in hours worked based on production demands. tools & equipment used Stapler Windows Photocopier/Scanner/Fax Machine Telephone Computer Microsoft Office (Word, Powerpoint, Excel, Sharepoint, Outlook, etc.) Torque wrench Telephone Safety Glasses (when required) Other hand tools as required. physical demands Physical Demands Lift/Carry Stand F O Walk F O Sit O F Handling / Fingering F F Reach Outward O F Reach Above Shoulder O O Climb O N Crawl O N Squat or Kneel O O Bend O O Twist O O 10 lbs or less O 11-20 lbs O 21-50 lbs O 51-100 lbs N Over 100 lbs N Push/Pull 12 lbs or less O 13-25 lbs O 26-40 lbs O 41-100 lbs O +100 lbs O N (Not Applicable) Activity is not applicable to this occupation. O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements: Sense of Sound (Audible Voice), Ability to wear Personal Protective Equipment (PPE) (Safety Glasses), Full-Color Vision is required. The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. RAE Corporation is an Equal Opportunity Employer EEO/AA M/F/V/D