Quality control technician jobs in Castro Valley, CA

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

Johnson Service Group has an immediate temporary opening for an Inventory Control Technician for our client in San Jose. This position is responsible for performing a variety of warehouse and inventory control tasks, including receiving, sorting, and distributing materials, tools, supplies, and equipment. Duties include operating material handling equipment for loading and unloading shipments, supporting internal mail delivery, and ensuring the timely and safe delivery of requested materials to various offices on campus. Key Responsibilities Receiving and Sorting: Unpack materials, supplies, tools, and equipment. Verify articles received against packing lists and purchase orders. Inspection: Inspect incoming materials for wear, damage, or defects; count or weigh articles and notify appropriate staff if repairs or adjustments are required. Issuing Materials: Fill orders from requisition forms. Issue tools, parts, and other technical materials and equipment in compliance with established policies and procedures. Material Handling: Operate a variety of material handling equipment, including delivery trucks/vans and forklifts, to load and unload equipment and supplies. Inventory Management: Operate a computer system to access inventory and related information. Apply code numbers to materials and equipment from an existing code system and label items for storage. Skills: Organization Customer service Strong problem-solving skills Courier experience Working independently with minimal supervision Perform a variety of inventory control functions Maintain records and files Qualifications High school diploma or equivalent. Minimum of one year of storekeeping or inventory control experience. Proficiency in using computers. Ability to operate material handling equipment. Valid California Driver's License Must obtain client Forklift Certification within six (6) months of appointment. Rate 32.43/hr. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Up to $30,000 Sign-On bonus based on experience Doctors Medical Center Modesto is a full-service, comprehensive health care facility, dedicated to providing the finest medical care for the community. From preventative and diagnostic services to expertise in some of the world's leading technologies, DMC's multidisciplinary team of physicians and healthcare professionals is dedicated to your good health and well-being. Recognized for innovative cardiac and neonatal intensive care to advanced stroke and trauma treatment, the outstanding doctors at DMC represent most major medical specialties and are committed to being there for you, when you need them most. We offer competitive salaries and benefits including a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Relocation package offered for this position ************************* Summary: Reporting to the Director of Imaging Services and/or designee, the Diagnostic Imaging Technologist is responsible for radiological care to patients of all ages, for the purpose of diagnosis and/or treatment of anatomical and physiologic disorders using ionizing radiation. Must have working knowledge of conventional Radiology. Must be able to operate all X-ray equipment and PACS. Prepares exam room, equipment, supplies and medications for patient's procedures and is responsible for patient education. Proven competency in addition to conventional radiography, working knowledge in at least one other area CT, MRI, or Interventional Radiology if applicable competencies are met. May be required to take call. Sign on bonus doesn't apply to internal applicants BLS ARRT( R ) CRT Fluoroscopy permit required #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

A leading patent consulting firm in San Francisco is seeking a Patent Agent or Associate. The role requires a degree in engineering or related fields, registration to practice before the USPTO, and a law degree for attorneys. Candidates should be confident in discussing technical details and comfortable engaging with prominent tech companies. This position offers opportunities across various fields, including AI and clean energy. #J-18808-Ljbffr

Associate Analytical Technician About the Role As an Associate Analytical Technician, you will support manufacturing operations by conducting laboratory analyses that provide essential data for our processes. You will prepare samples, maintain laboratory instrumentation, acquire and report critical data, and help ensure accuracy and safety in our lab environment. Key Responsibilities Train under senior team members to perform routine laboratory analyses until proficiency is demonstrated Collect samples following defined Sample Plans Perform basic preventive maintenance of analytical systems and laboratory instruments Evaluate the validity of results for routine analyses and take necessary corrective actions Monitor analytical systems, escalating problems when required Document, communicate, and archive analytical results and related data Adhere to Environmental, Health and Safety (EHandS) procedures and Operating Discipline Management System (ODMS) practices Suggest improvements to laboratory processes and tools Escalate non-routine requests and issues to appropriate team members Requirements Education & Experience:Completion of Vocational Education or Upper Secondary Education (High School Diploma or equivalent) Laboratory, manufacturing, or related work experience preferred Coursework in chemistry or related scientific field (post-secondary education is a plus) Skills:Established basic laboratory skills Familiarity with standard operating procedures and analytical scientific methods Good communication and documentation abilities Attention to accuracy and safety standards Work Schedule Details:Workdays: 4 days on, followed by 4 days off (unless scheduled to cover vacation time) Shift Duration: 12-hour shifts Rotation: Every two weeks Day Shift: 5:50 AM - 5:50 PM Night Shift: 5:50 PM - 5:50 AM Example of Biweekly Rotation:4 consecutive day shifts (5:50 AM - 5:50 PM), followed by 4 days off Return for another 4 day shifts, then 4 days off Switch to 4 consecutive night shifts (5:50 PM - 5:50 AM), followed by 4 days off Continue with another 4 night shifts

Russell Sigler Inc. is a leading independent distributor in the HVAC industry, specializing in Carrier products for over 50 years. Our mission is to deliver exceptional service and products while fostering a supportive work environment for our employees. Position Summary: The Technical Engineer provides design, systems application, and proposal preparation. Works with outside sales engineers, territory managers, and customer contracting and engineering accounts. Responsible for a variety of tasks including equipment selection, job pricing, creation of bid projects, producing submittals, placing orders, and other key job responsibilities including but not limited to the following: Key Duties and Responsibilities: Provide high-level independent ownership of projects of varying size at the different stages of execution, sometimes from start to finish including design, vetting, bidding, submittals, and final release of order Read, interpret, and make pricing and technical equipment selections, and decisions based on contract documents, including but not limited to engineering specifications, engineered equipment schedules, and architectural/engineering plans Review of engineering design and contractual documents to identify areas of risk and compliance Utilize mechanical engineering to verify mechanical equipment is being applied and implemented within the intended and acceptable range of operation Estimating and proposal writing of complex commercial engineered equipment and automation projects Technical specification writing and review Design and application support of external consulting engineering firms for commercial and industrial construction projects Project site visits for engineering and application support of commercial equipment and automation. Offsite project and opportunity meetings with contractors, engineers, owners, and complementary trades Management of multiple time-sensitive deadlines simultaneously Coordinate between the contracting sales department and engineering sales department on design changes and strategy Interact and work closely on a daily basis with outside sales engineers, territory managers, engineering firms, contractors, owners, project coordinators, central bid desk, credit department, order entry department, customer assurance department, warehouse employees, and manufacturers Provide independent high-level direct support for certain contractors, engineers, and outside sales engineers Coordination and verification of multiple external vendors and internal departments to create complex single-package equipment and automation solutions Work among a team to complete a large array of projects in varying phases, delegating work among each other, and independently completing Participate in the development and maintenance of standard operating procedures Attend and participate in job meetings, sales meetings, and trainings Participate in the training of others within and outside of the department Self and group leadership of technical development training and education Critical Knowledge and Skills: Accuracy, analytical skills, and attention to detail are required Exceptional communication and customer service skills Detail oriented Multitasking and organizational skills Good judgment and planning skills Work independently with minimal supervision in a fast-paced work environment Research using systems, software and product guides, catalogs, and manufacturing literature Review, evaluate, and make suggestions and product recommendations to customers as well as provide technical support when needed Knowledge of HVAC Carrier Products is preferred Knowledge of Carrier software (Quote Builder, Sage, HVAC Partners, ECAT, vendor websites) is preferred Work in a constant state of alertness and a safe manner Education and Experience: BS in Engineering is required, a Mechanical Engineering degree is preferred Must have a minimum 3-5 years of HVAC industry and sales experience Pay Range: Starting at $70,000.00 annum. ** Russell Sigler, Inc. (Sigler) is an equal opportunity employer. All applicants will be considered for employment based on merit, qualifications, and business need **

Job Title: Lab Technician Pay Rate: $21.00/hr [Weekly Pay] Shift Timings: 06:00 AM to 03:30 PM [Monday to Friday] Contract Duration: 06 Months [Temp-To-Hire] Job Description: The Laboratory Technician will complete routine analytical and laboratory testing in support of the food safety quality and operational teams. Perform routine analysis of product testing, being responsible for checking and monitoring instrumentation performance and conducting tests. Document results into databases and/or communication test results. Help develop food/feed safety, quality and regulatory culture collaborating cross-functionally to build, maintain and improve an effective food safety, quality and regulatory culture. Run calibration checks, preventive maintenance tasks, and simple repair to analytical instrumentation, maintaining customer specifications books up-to-date. Interpret and document results of tests into active databases and communicate results to internal customers as required.

Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in Corporate Sector, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, including Product Owners, Business Control Managers, and Regulators, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities Conduct in-depth reviews of existing processes for effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations. Lead development & implementation of formal processes, procedures, workflow automations to continuously optimize the team's resources to improve reliability, costs, and sustainability. Develop and maintain robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals. Execute reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work. Proactively monitor and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance. Develop and execute comprehensive project plans, incorporating technical requirements, resource allocation, and timelines to ensure on-time delivery of technology solutions Required qualifications, capabilities, and skills Formal training or certification in Information Technology, and/or 5+ years of technology, risk and controls knowledge. Strong leadership skills with exceptional communication and presence Advanced knowledge of multiple IT control and project management practices and experience working across large environments Ability to collaborate with high-performing teams and individuals throughout the firm to accomplish common goals Experience In Depth reviews of existing processes for effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations. In-depth knowledge and experience in Infrastructure and/or Application Risks and Controls Ability to independently use systems and analyze/use data to address/identify gaps in Controls, and highlight Risk Working experience in collaborating with engineering as well as business functions to achieve objectives and hold difficult conversations/escalations Preferred qualifications, capabilities, and skills Demonstrated ability to multi-task in a high-pressure environment Fast learner with an eye for detail CRISC, CISSP, or other industry-recognized risk certifications are preferred Audit experience preferable, but not mandatory

Job Details Dynatect Ro-Lab - Tracy, CA Dynatect Ro-Lab - Tracy, CA Full Time High School $25.00 - $25.00 Hourly QA - Quality ControlDescription INFORMATION Department: Quality Reports to: Quality Manager Work Hours: Full-Time (approx. 40-hour workweek, Shift 1 or 2) FLSA Status NON-EXEMPT DESCRIPTION: The Quality Technician is responsible for performing required inspections of vendor supplied and Dynatect manufactured parts. These inspections are performed using criteria from applicable drawings, standards, specifications, and any other internal or external specified requirements. The Quality Technician is responsible for communicating with respective departments, vendors and individual employees to troubleshoot quality and process related issues. Additionally, the Quality Technician will be responsible for assisting and finding solutions to assigned internal and external complaints and corrective actions, and for assistance with identifying material and process non-conformances. The Quality Technician will also assist with continuous improvement projects that mitigate risk and ensure a quality product is delivered to the customer. PRIMARY RESPONSIBILITIES: Work in a safe and courteous manner. Perform product inspections. Perform calibration activities. Assist with resolving material and process non-conformities. Assist with continuous improvement activities. Promote and encourage a quality mindset in other employees. Attend Quality team meetings as scheduled. SECONDARY RESPONSIBILITIES: Perform other duties as assigned. SUPERVISORY RESPONSIBILITIES: None. Qualifications SKILLS AND ABILITIES Ability to keep accurate records. Be able to multi-task in a fast-paced environment. KNOWLEDGE AND EXPERIENCE Minimum of 3 years' experience in a manufacturing environment. Familiar with quality control and data analysis. Ability to follow documented procedures and standards. Proficient in Microsoft Office. Familiar with measurement equipment and its functionality.

Quality Technician will report to the Receiving Quality team lead and have the final goal to support the development of business processes to ensure that Ryzen's Client's products and services provide a high level of quality that meets the defined standards and specifications and in the end, the customer expectations. You will be helping in establishing high quality standards and will ensure product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. You will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part and vehicle level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status in NPI, manufacturing, and services Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Qualifications Bachelor's degree with 6- 8 years of experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Experience with Root Cause Analysis, Problem Solving and Quality Control methods Must be familiar with Google suites (words, docs, sheets) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Electrical component (wire harness) inspection experience Previous experience in SAP and/or JIRA system Industry background and/or experience in; automotive, software, contract manufacturing, customer management Pay Rate: $35.00/HR - $45.00/HR

Working in a team of media process technicians, media process technician I will manufacture dehydrated and liquid cell culture media. Formulation technician will be able to follow batch record instructions and will be expected to weigh microgram to kilograms quantities of individual raw materials, calibrate equipment, follow safety policies and procedures, operate milling equipment, perform sterile filtration and any other tasks required to complete cell culture media manufacturing. Standard product testing, such as osmolality, pH and turbidity, will also be performed in this job. This position works closely with R&D, procurement, quality, process technology, marketing as well as external and internal customers and vendors RESPONSIBILITIES: Responsible for the staging and compounding of raw materials within weight tolerances (e.G. Micrograms to kilograms), milling, blending, aseptic liquid filling, process control monitoring and documentation of such procedures for manufacturing dehydrated culture media and liquid media in accordance with production schedules following the appropriate GMP and department procedures Completes all required documentation neatly, accurately, and in accordance with GMP. Performs cleaning, inspection, calibration and assists in the maintenance of equipment. Maintains related logs and records. Performs equipment troubleshooting. Handles raw materials per GMP and Safety requirements. Uses equipment such as pipettors, balances, osmometer, turbidimeter and pH meters. Ensure that tasks are performed in a safe and responsible manner to create an injury free and incident free workplace Required to follow through on assigned responsibilities and able to function under supervision. Responsible for promoting positive team environment through good communications and team engagement. May be required to work overtime. Performs other duties as assigned in support of business goals QUALIFICATION REQUIREMENTS: Minimum of High School Diploma or equivalent. Minimum of 6 months experience in a high-paced laboratory environment or manufacturing facility. Equivalent combination of education, training, and relevant work experience maybe considered. Must be able to read, write, and follow testing and inspection procedures. Must be able to maintain neat, accurate and complete records and logs. Mechanical aptitude and ability to disassemble and reassemble various equipment. Good communication skills and ability to work both individually and as part of a team. Flexibility with departmental work schedules including overtime. Must be able to focus with continuous attention to detail. Basic experience in weighing multiple components is required. Basic proficiency with PCs (Personal Computers) and use of Windows applications such as MS Excel, MS Word and MS PPT is required. Statistical analysis using mathematical spreadsheets such as Excel or Minitab is highly desired. Must be able to lift or move approximately 40lbs Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

TekWissen provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each clients requirements and span the services spectrum from Application Development/Maintenance, testing, IT Consulting & staffing for IT Infrastructure Management through strategic consulting and industry oriented Business Process. Our end-to-end Business Process as a Service (BPaaS) solutions support complex, high-value, knowledge based work. Combining applications, platforms, infrastructure, knowledge processes, and domain expertise allows us to deliver greater efficiencies and innovative business capabilities. Qualifications Position:Quality Technician III Location:San Jose,CA Pay Rate : $30.00 - $35.00/hr. Essential Duties & Responsibilities: * With limited supervision, assures policies, procedures, inspection techniques and quality plans conform to established standards * Performs complex analyses and tests of raw materials, packaging materials and/or finished products from manufacturing to ensure quality standards and compliance to customer and regulatory requirements * Monitors performance of inspectors and institute corrective action when necessary * Trains new inspectors and department personnel on policies, procedures, inspection techniques and quality plans * Assures gauges are within the current calibration cycle and are properly used and stored. Arranges for repair of gauges as needed. * Participates in design of experiments and process capability studies * Reviews Statistical Process Control (SPC) data. Maintains integrity of SPC data by correcting input errors and follows up with retraining of inspectors if needed. * 4+ years related experience and/or training * Experience certifying typical metrology equipment such as calipers, micrometers and computer controlled gauging equipment * General knowledge of blue prints, engineering specifications interpretation, inspection using measuring and test equipment, including CMM, FARO ARM and measurement techniques, geometric dimensioning and tolerance and quality calibration processes required. Additional Information If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest, please call me ASAP at ************ Thanks & Regards, Monika

Job DescriptionSalary: $24-$34 DOE General Description OMW is a highly respected contract manufacturing company specializing in precision machining of custom metal and plastic parts for some of the worlds largest aerospace, electronics, and healthcare companies. We have recently been ranked one of the Top 100 Fastest Growing Private Companies in the Bay Area, by the San Francisco Business Times. The Fast 100 List will be featured in a special print edition of the San Francisco Business Times. To support our rapid growth, we are looking to fill new positions and are looking for team members who are challengers, teammates, strategic thinkers, customer-oriented achievers, and game changers with a desire to create a long term partnership with OMW. Experience Required: Must have Excellent written English skills and ability to read and write reports and documentation. Direct machining or manufacturing experience in aerospace and avionics highly desirable. CMM programming experience is highly desirable. Experience and aptitude using windows PC software, including Excel and Word. Some background in Quality Management Systems such as ISO 9001 & AS9100 is a plus. Knowledge of Basic GD&T principals. Skills required: The ability to use calipers, micrometers, pin and thread gages, height gages, microscopes, comparators, and other measurement equipment (training available). Must be able to operate automated CMM after training and prepare FAIR documentation. Ability to read engineering prints and interpret tolerancing and dimensions (including geometric tolerancing). Weekend Shift is a full-time position and has flexible hours. The Shift must cover Saturday and Sunday, but other days are flexible. For the weekend schedule, we currently offer two options: a 3-day shift covering 12 hours each day, or a 4-day shift covering 10 hours each day. Specific Responsibilities: Prepare FAIR and other QC documentation. Operate and program CMMs for quality inspections (can train). Prepare shop floor inspection reports and perform first article inspections on in-process parts. Perform final QC signoffs and inspections on completed parts. Keep parts from "escaping" with unacceptable defects. Work to continuously lower company's defect rate. Handle customer and internal non-conformances. Interface with company's software systems. Compensation based on experience. Benefits include 100% company paid healthcare for the employee (85% for family), generous paid time off accrual, retirement plan with company contribution, educational support, bonuses, and more. Please email your resume or job history to email provided in header. Suitable candidates will be contacted for interviews. This position requires use of information or access to production processes subject to national security controls under the U.S. export control laws and regulations (including, but not limited to, the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work for OMW Corporation, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work. The U.S. export control regulations define a U.S. Person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e., Green Card Holder), and certain categories of Political Asylees and Refugees. OMW Corporation is an equal opportunity employer and drug-free workplace.

Full-time Description To assist in Inspection Lab activities allowing it to perform seamlessly while providing accurate, repeatable measurement results that fully support the needs of our internal and external Customers Requirements 1) Working with peers to help coordinate and schedule Inspection Lab functions so all requirements are accomplished in the most efficient manner possible. 2) Perform first piece, in-process, and final inspections and document as required 3) Program and operate the CMM & Faro Arm 4) Crosstrain on all lab equipment to have a functional knowledge and operational ability of the equipment listed above 5) Be a subject matter expert on the use of all conventional measuring equipment, ability to design and develop specialty gauging, along with a highly developed understanding of GD&T 6) Work with the QA Manager and Quality Engineer and other Inspectors to perform capability studies, Gauge R&R studies, and other statistical techniques. 7) Supply the necessary data for AS9102 and PPAP submissions. 8) Assist in calibration activities to ensure all are accomplished as scheduled Research, and suggest upgrades/alternatives/additions to the existing lab equipment while also justifying the procurement by demonstrating the appropriate ROI

Working in collaborative group environment, we manufacture high quality custom oligonucleotides in a high efficiency, fast paced setting. These oligos manufactured are used in a variety of applications including helping perform genetic research, diagnose disease and help with food supply. What will you do? You work with a team to Manufacture Custom Oligonucleotides for use in the biotech industry by following established protocols and SOPs. The team uses semi-automated and automated basic lab equipment. Regularly evaluate non-routine test results and either fail the product or allow it to continue through the production cycle. Highly repetitive tasks for prolonged periods of time. Understand scientific principles in order to problem solve, troubleshoot test results, evaluate alternative choices and exercise independent judgment in selecting the best solution. Provide multiple decision options and corresponding logic/data behind the decisions. Proactively identifies production problems. Provides input and shares ideas and suggestions about improving lab techniques, protocols, processes, special handling of the product and equipment. Balance multiple tasks. Demonstrate knowledge in the use of basic lab techniques and basic computer knowledge. Demonstrate ability to meet standards as defined by the manufacturing process. Thoroughly and accurately complete documentation (completion of Batch Records, document data verifications, document problems, bring deviations to the attention of the Supervisor/Manager). Continuously strive to improve output goals. Demonstrate good time management resulting in efficiency. Support cost improvement initiatives by reducing failures, improving capacity and using supplies wisely. Reduce work in process, queues and cycle times. Advise appropriate people about problems/questions; be prepared to discuss problems/questions clearly. May be required to perform other related duties as required and/or assigned. Position occupies a significant role in mainstream oligonucleotide production. The role requires the ability to exercise judgment within generally defined practices and policies in selecting methods and techniques for obtaining solutions. Skills Chemistry, Formulation, Gmp Top Skills Details Chemistry,Formulation,Gmp Additional Skills & Qualifications * Degree in the bench sciences (Biology, Chemistry, etc) is preferred but a HS diploma can be considered. * Strong digital literacy including familiarity with relevant software (Excel and Word) are required. * 1 year of lab experience preferred (1 year maybe acquired through work or school). * Proven track record of working well with others in a collaborative team environment. Knowledge, Skills, Abilities: * Operate in a fast-paced environment and while working as a team. * Efficient worker whom can multitask across multiple areas within the manufacturing environment. * Required to be able lift up to 20 lbs * Ability to stand while performing duties. * Capable of working safely with chemicals and hazardous materials. * Capacity to work outside of regular work hours when business demands call for it. Experience Level Intermediate Leve Job Type & Location This is a Contract position based out of Pleasanton, CA. Pay and Benefits The pay range for this position is $25.45 - $25.45/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Pleasanton,CA. Application Deadline This position is anticipated to close on Dec 8, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Work Schedule Third Shift (Nights) Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cleanroom: no hair products, jewelry, makeup, nail polish, perfume, exposed piercings, facial hair etc... allowed, Loud Noises (Equipment/Machinery), Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Standing for full shift, Will work with hazardous/toxic materials Job Description Formulation Technician II 1st Shift: 6a-2:30pm PST Starting around $24/hr.! As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: The position is available at our Pleasanton site in California supporting the Genetic Sciences Division. How Will You Make an Impact?: The Pleasanton site is seeking a Formulation Technician II with interest in life sciences and biotechnology. The candidate will part of a manufacturing team for oligonucleotides and related products such as assays, arrays, and kits. A Day in the Life: Manufacture products as delegated by the Production Team Supervisor or Team Leader: Complete lab operations e.g. with automated systems like DNA/RNA synthesizers, liquid handlers, and with analytical instrumentation like HPLC and LCMS. Report metrics to the team leader during daily Tier Meetings and address and report any problems in and propose effective countermeasures. Education: High school diploma or equivalent required. Experience: Required: Minimum of 1 year of work experience in a manufacturing, operations, production, lab setting or related field Preferred: Experience in a cGMP environment Knowledge, Skills, Abilities: Follow written SOPs and batch records and revise as needed. Perform manufacturing/ production tasks as scheduled. Handle and work with biological and chemical reagents. Maintains quality service by established organization standards. Ability to coordinate and prioritize work to ensure timely delivery. Communicate effectively with other production staff. Achieve high efficiency by reliable and punctual attendance. Physical Requirements / Work Environment Specific gowning is required including gloves, safety glasses with no makeup / jewelry, and hair, beard net and face cover for some operations. Ability to infrequently lift and manipulate up to 40 pounds unassisted. Ability to stand and move about including reaching, bending, stooping, grasping. Ability to use hand tools and equipment including forceful gripping, grasping, pushing, pulling and repetitive motion. Ability to use PPE (Personal Protective Equipment) and understand chemical hygiene including labels and SDS (Safety Data Sheets), common chemicals are disinfectant, solvents and IPA (Isopropyl Alcohol 70% and 99%). What We Offer Compensation Competitive Hourly Pay Rate Additional shift differential for 2nd shift and 3rd shift positions Annual performance-based bonus Annual merit performance-based increase Excellent Benefits Benefits & Total Rewards | Thermo Fisher Scientific Medical, Dental, & Vision benefits-effective Day 1 Paid Time Off & Designated Paid Holidays 401K Tuition Reimbursement Employee Referral Bonus Career Advancement Opportunities Compensation and Benefits The hourly pay range estimated for this position based in California is $21.42-$35.70. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Formulation Technician II Duration: 12 Months Job Type: Temporary Assignment Work Type: Onsite Shifts: Monday to Friday from 07:00 AM to 03:30 PM Pay Rate: $23.00-$23.00/hourly Monday to Friday from 11:00 AM to 07:30 PM Pay Rate: $25.00-$25.00/hourly Overview: TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients worldwide. The job opportunity is for one of our clients specializing in biotechnology product development services. Our client is dedicated to supplying laboratory equipment, chemicals, supplies, and services essential in healthcare, scientific research, safety, and education. As the global leader in serving the field of science, our client boasts an annual revenue of around $40 billion with a mission to empower customers to make the world healthier, cleaner, and safer. Our client's global team is committed to delivering an unparalleled blend of cutting-edge technologies, convenient procurement options, and pharmaceutical services under their industry-leading brands. Summary: This role is part of a collaborative manufacturing team focused on producing high-quality custom oligonucleotides in a fast-paced lab environment. The products support genetic research, disease diagnosis, and food supply applications. The position plays a critical role in mainstream oligo production, requiring sound judgment, adherence to SOPs, and continuous improvement mindset. Responsibilities: Manufacture custom oligonucleotides using established SOPs and protocols. Operate semi-automated and automated lab equipment. Evaluate non-routine test results and make pass/fail decisions or escalate appropriately. Perform highly repetitive tasks with consistency and accuracy. Troubleshoot test results using scientific principles and independent judgment. Proactively identify and report production problems. Suggest improvements to lab techniques, processes, and equipment handling. Balance and manage multiple tasks efficiently. Maintain thorough and accurate documentation (Batch records, deviations, data verification). Meet manufacturing output and quality standards. Support cost optimization by reducing failures and improving process efficiency. Work towards reducing WIP, cycle time, and process queues. Communicate issues clearly with supervisors and relevant stakeholders. Ensure adherence to safety guidelines while handling chemicals and hazardous materials. Collaborate effectively with team members and provide/receive performance feedback. Take on additional related duties as assigned. Required Skills: Degree in Life Sciences (Biology, Chemistry, or related field). 1+ year of lab experience (academic or industry). Prior experience in a manufacturing or production lab environment. Proven ability to work effectively in a collaborative team setting. Experience with high-throughput or repetitive lab workflows. Basic understanding of process improvement and lean manufacturing concepts. Knowledge of basic lab techniques. Strong digital literacy, especially MS Excel and MS Word. Ability to work in a fast-paced, high-volume manufacturing environment. Multitasking ability across different production areas. Good documentation and technical writing skills. Ability to stand for long periods and lift up to 20 lbs. Strong problem-solving and analytical thinking. Ability to follow SOPs and quality standards precisely. Comfortable working with hazardous chemicals and materials. Flexible to work shifts and extended hours when required. Team collaboration and communication skills. TekWissen Group is an equal opportunity employer supporting workforce diversity.

Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Up to $30,000 Sign-On bonus based on experience Doctors Medical Center Modesto is a full-service, comprehensive health care facility, dedicated to providing the finest medical care for the community. From preventative and diagnostic services to expertise in some of the world's leading technologies, DMC's multidisciplinary team of physicians and healthcare professionals is dedicated to your good health and well-being. Recognized for innovative cardiac and neonatal intensive care to advanced stroke and trauma treatment, the outstanding doctors at DMC represent most major medical specialties and are committed to being there for you, when you need them most. We offer competitive salaries and benefits including a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Relocation package offered for this position ************************* Summary: Reporting to the Director of Imaging Services and/or designee, the Diagnostic Imaging Technologist is responsible for radiological care to patients of all ages, for the purpose of diagnosis and/or treatment of anatomical and physiologic disorders using ionizing radiation. Must have working knowledge of conventional Radiology. Must be able to operate all X-ray equipment and PACS. Prepares exam room, equipment, supplies and medications for patient's procedures and is responsible for patient education. Proven competency in addition to conventional radiography, working knowledge in at least one other area CT, MRI, or Interventional Radiology if applicable competencies are met. May be required to take call. Sign on bonus doesn't apply to internal applicants BLS ARRT( R ) CRT Fluoroscopy permit required #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

Shift: Monday -Friday with overtime and weekend hours as needed Duration: 12 Months Pay range: $23.00 Hourly - $23.00Hourly Onsite Job How Will You Make an Impact? Work in a team-based environment within a manufacturing lab responsible for synthesizing and testing ion exchange media used in chromatography consumables. A Day in the Life: Testing of resin products on specialized instruments to meet customer demand. Record and report test results accurately and maintain proper documentation. Complete production work-orders according to established procedures. Follow corporate quality policy to ensure high-quality standards. Follow safety requirements and actively participate in safety improvement activities! Maintain a clean and organized laboratory environment. Education: High school diploma or equivalent required. Experience: Required: No previous work experience required Preferred: Previous work experience in manufacturing, operations, production or lab setting or related field Knowledge, Skills, Abilities: Knowledge of Good Laboratory and Manufacturing Practices and standards. Good mathematical, problem-solving, and organizational abilities. Excellent verbal and written skills Ability to read and understand written procedures (SOPs) and follow verbal instructions. Familiarity with hand tools regularly used (wrenches, torque drivers, tweezer, etc.) PC literate and have experience with spreadsheet and database software. Physical Requirements / Work Environment Lift and/or move up to 40 pounds. Regularly required to sit, stand;walk;use hands & fingers to handle & feel. Visual abilities to detect small components and particles. Exposure to toxic or caustic chemicals, fumes or airborne particles. Occasionally exposed to moving mechanical parts and moderate noise level. PPE requirements: lab coat, Safety glasses, gloves, face shields, & safety shoes (all company provided.) P95 Mask in the areas that have exposure of solvent fumes. Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.