Quality control technician jobs in Clarkstown, NY - 176 jobs

At Corbion, we exist to champion preservation in all its forms, preserving food and food production, health, and our planet. The Quality Control Technician is a 2nd shift position based at the Totowa, NJ plant reporting to the Quality Control Supervisor. This role is responsible for performing daily analytical tests, pre-operation and line audits, and ensuring production procedures and systems are followed. The position ensures that all quality standards are consistently met while supporting the development of QC team members. Essential Functions * Follow all GMP's (Good Manufacturing Practices), FSMA, Safety, and Environmental regulations as well as company policies. * Maintain positive attitude. Focus on the customer, teamwork, and quality productivity. * Give recommendations to improve workplace safety, efficiency, and to better serve the customer. * Analyze finished product for various analytical testing including redox, Chittick, pH, %moisture, color, titratable acid (TA), enzymes, vitamins, proteins, etc., on a daily basis. * Daily verification/calibration of lab equipment prior to testing finished product to ensure product quality. * Maintain the cleanliness of the lab making sure that the areas are clean after testing. * Ensure that lot codes and finished products package is correct and legible. * Product that has been analyzed and does not meet specification, must be re-sampled and re-analyzed immediately. If product is not in compliance, HOLD stickers must be applied immediately and system hold activated. * Participate in and successfully complete all required laboratory training classes. * Complete the picking, testing and approval of raw materials, issuing deviation when the material is out of specification and reporting to the supervisor/manager. * Keeping record of the materials that need to be tested for micro and send the samples on time. * Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Education & Experience * Bachelor's Degree in Chemistry, Bio-Chemistry, Chemical Engineering, Biology or Microbiology. * Experience in a laboratory environment within a related industry is required. * SAP/Sample Manager experience preferred. Knowledge, Skills and Abilities * Strong analytical and problem-solving skills. * Knowledge of laboratory testing procedures and equipment calibration. * Ability to maintain compliance with GMPs, FSMA, HACCP, and company policies. * Strong communication and teamwork skills. Working Environment * Manufacturing plant with large open floor areas and loud machinery. * Exposure to high temperatures in summer and cold environments in winter. * Dusty environment due to raw materials. * Exposure to allergens including eggs, soy, sesame seeds, milk, and wheat. Physical Demands * Must wear GMP-compliant hair and beard nets, company-provided uniforms, gloves, and, in some areas, respirators. * Ability to stand for long periods and perform repetitive laboratory or line auditing tasks. * Must be able to lift up to 55 lbs. Our offer The below reflects the range of possible compensation for this role at the time of this posting. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, performance, location and business or organizational needs. The base salary range for this role is $24.00 to $25.00 per hour. In addition, we offer: * Variable bonus potential * Paid time off, including company holidays * Medical, dental and vision coverage * 401K with company match * Education assistance * Short- and long-term disability * Employee Assistance Program (EAP) About Corbion Corbion is the global market leader in lactic acid and its derivatives, and a leading supplier of emulsifiers, functional enzyme blends, minerals, vitamins, and algae ingredients. We use our unique expertise in fermentation and other processes to deliver sustainable solutions for the preservation of food and food production, health, and our planet. For over 100 years, we have been uncompromising in our commitment to safety, quality, innovation and performance. Drawing on our deep application and product knowledge, we work side-by-side with customers to make our cutting-edge technologies work for them. Our solutions help differentiate products in markets such as food, home & personal care, animal nutrition, pharmaceuticals, medical devices, and bioplastics. In 2024, Corbion generated annual sales of €1,288.1 million and had a workforce of 2,399 FTE. Corbion is listed on Euronext Amsterdam. For more information: *************** Corbion is an equal opportunity employer and committed to a diverse workplace. All applicants will be considered equally without regard to race, color, ethnicity, veteran status, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, handicapping condition, membership in an organization or any other non-merit factors. Corbion provides reasonable accommodation to applicants. EOE/M/F/Vet/Disabled Corbion does not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. All candidates must be submitted by approved Corbion vendors who have been expressly requested to make a submission by our Talent Acquisition team for a specific job opening. No placement fees will be paid to any firm unless such a request has been made by the Corbion Talent Acquisition team and such candidate was submitted to the Corbion Talent Acquisition Team.

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Responsibilities Deliver on production goals, while focused on safety and quality Produce product per recipes and SOP's, maintaining high quality standards Package product into proper containers with proper labeling to ensure compliance with state regulations Ensure all standards for processing procedures and laboratory protocols are followed Compliance with local and state regulations Adherence to quality control methods throughout entire process Documentation of manufacturing methods are created and maintained Electronically convert packaged products in the state traceability system Manage time efficiently to meet goals while consistently producing quality product Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift Exhibit competency in basic organizational skills, communication skills and Windows based operating software Use independent judgment regarding product processing, keeping quality and goals in mind Help create a positive environment by having a positive attitude and by being self-motivated Other duties as assigned Qualifications High School Education or GED graduate; some college or college graduate preferred 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred Equivalent combinations of education and experience may be considered Must be able to work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure, and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI Ability to listen well and communicate effectively with various audiences Ability to perform monotonous tasks with great efficiency without losing qualities Must be able to follow basic instructions and accept constructive criticism Prior cannabis experience not required Additional Requirements Must have a valid driver's license or State ID card Must be a minimum of 21 years of age Must pass all required background checks Must be and remain compliant with all legal and company regulations for working in the industry Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$19.50-$20 USD

Accountability Objectives: Quality Assurance Technicians will ensure compliance of food safety and GMP systems along with quality programs, policies, procedures, and processes that are designed and necessary to ensure the production of safe quality food products. Specific Accountabilities: Inspect and Monitor daily Plant for Food Safety and Quality activities and any deviations report to Quality Supervisor. Perform daily pre- operational sanitation inspection visual and swabbing before production starts. Effectively communicate quality assurance expectations to production personnel. Raw material inspection for specification compliance. Conduct metal detector challenges and observations through the course of the shift. Verify the calibration of all metal detectors, scales, and thermometers. Conduct sensory evaluations of raw materials and finished product and record results. Collect production samples for independent evaluation to ensure specification compliance for finished products. Ensure compliance with established policies and procedures such as, HACCP, GMPs, SSOP, process deviation, hold and release. Assist with solving problems by analyzing data, investigating issues, identifying solutions, and recommending actions. Perform basic lab analysis (fat, Vacuum and Oxygen test) on in-process and finished products. Enforce food safety and quality policies and procedures. Perform Equipment calibrations (thermometer) and additional duties as directed. Any issues related to FSQM are reported to quality management team. Monitor incoming and outgoing product quality per company and customer specifications. Qualifications: Knowledge in food processing/HACCP/SQF, and/or regulatory compliance strongly preferred, but not mandatory. Fluent in English language, bi-lingual (Spanish) preferred. Ability to work a flexible schedule. Preferred education: Associates Degree, Bachelors a plus Ability to work independently. Basic knowledge of computer skills In absence of QA technician, QA supervisor will back up for QA technician's role.

QC Technician oversees regulatory and quality compliance in bakeries, including QC monitoring and issue reporting. It also involves contributing to bakery R&D efforts, working with consultants to develop new products. JOB DUTIES (include but are not limited to the following): Monitor and support the implementation and maintenance of whole Quality Management System. Those programs are but not limited to: record keeping, allergen, pest control, temperature of coolers and freezers, pre-op, internal audit, and quality control. Monitoring the daily QC activities to ensure they are performed to the published procedures and are properly documented. Visit corporate and franchise stores to support and educate bakery teams/ kitchen managers. Regulate quality control of each bakery. Identification of any quality problems and recommend changes in quality standard where necessary. Working with consultants on innovating new potential products for the brand. Testing new recipes in the test kitchens. Data entry using common computer database software (Excel, Access or equivalent). QUALIFICATIONS & SKILLS: Prior bakery experience is required, with preferred experience in bakery industry research and development. Knowledge of baking various types of bread and baking and decorating cakes. Associate Degree, or Bachelors degree, or equivalent years of work experience 3-5 years of combined experience in food or ingredients and manufacturing. Knowledge of GMPs and HACCP. Basic understanding of food production fundamentals Proficiency in MS Office Products (Outlook, Word, Excel & PowerPoint) and basic computer skills. Excellent verbal and written communication skills. Ability to read and interpret procedure manuals and regulatory documents, and to write reports. Ability to effectively present information and respond to questions from management level. Demonstrate ability to manage and prioritize multiple tasks and demands working with minimum supervision. Detail oriented, excellent record keeping and documentation skills Employee Benefit Health Insurance options: PPO Medical, Dental, Vision covered (Company 100% paid) *insurance starts on the very 1st date. Life Insurance (Company 100% paid) Flexible Time (starting time can vary everyday) Short Term and Long-Term Disability Leave (short term 100% covered) Lifestyle Allowance (up to net $70 per Month) Cellphone reimbursement eligible Employee Discounts (40% off company products & services) 401(k) 5% Match (no vesting period!) from Day 1 Paid Time Off (generous and increases by tier!): Max ceiling of 180 hours PTO (15 days) the 1st year and increases by tier. Wellness Day: 40 Hours (Use it or Lose it System) Paid Maternity Leave (paid 100% for 12 weeks) Paid Secondary Caregiver Leave (up to 2 weeks) Paid Creative Leave Paid Holidays (11 days) Educational Benefit Employee Club Activities & Much More! Experience: Baking: 2 years (Required) Willingness to travel: 25% (Required)

Job DescriptionQuality Control Technician About the Role We import and source a diverse portfolio of physical therapy, occupational therapy, and sports medicine products from trusted manufacturers worldwide. We're looking for a hands-on Quality Control Technician who can be our “eyes and ears” on product quality and design. In this role, you'll work directly with suppliers to solve problems, prevent issues before they happen, and ensure our customers receive reliable, high-quality products. You'll apply engineering troubleshooting and problem-solving methods to test products, diagnose failures, and work with manufacturers on improvements. This isn't a desk job-you'll be testing products, building simple test setups, measuring components, and diving into why something failed. You'll work across multiple product types and engineering disciplines, from electrical to mechanical to materials science. What You'll Do Test incoming product samples and production runs, checking that they meet specifications and function properly Apply systematic engineering troubleshooting methods to diagnose product failures and defects Communicate directly with factory partners about quality issues, test results, and improvement recommendations Evaluate customer complaints and returns, determine root causes using engineering analysis, and recommend fixes Proactively suggest design or manufacturing improvements to prevent problems Document test results, failures, and findings in clearly written technical reports Design and build simple test fixtures, jigs, or measurement setups as needed to evaluate products What We're Looking For Essential Qualifications: 2-5 years of hands-on experience in quality control, manufacturing, testing, product development, and technical troubleshooting Solid understanding of engineering troubleshooting and problem-solving processes Comfort using basic testing and measurement equipment: force gauges, load cells, calipers, micrometers, durability testers, electrical testers, or similar tools Ability to systematically analyze problems-breaking down issues, forming hypotheses, testing solutions, and documenting findings Clear written and verbal communication skills for reporting findings and coordinating with suppliers and colleagues Ability to work independently and manage multiple quality issues simultaneously Genuine interest in preventing quality problems and improving product reliability Basic Excel or data logging skills necessary Nice to Have: Engineering degree or technical diploma (any discipline) Basic knowledge of quality standards (ISO, ASTM) or medical device regulations Familiarity with CAD software or technical drawings Experience in medical device, equipment manufacturing, or regulated industries Why You'll Like This Job Variety: You'll work across multiple disciplines and product types-electrical, mechanical, materials, ergonomics, and more Direct impact: Your work directly improves product quality and keeps customers satisfied Hands-on engineering: If you love applying engineering principles to solve real-world problems, this role is for you Supplier partnerships: You'll develop working relationships with factory partners and see your recommendations implemented Supportive team: You'll work alongside our QA documentation specialist and have clear ownership of the technical quality side About Fabrication Enterprises Inc. FEI is a leading global supplier of physical therapy, occupational therapy, and sports medicine equipment with over 9,000 SKUs distributed to nearly 100 countries. For 50 years, we've built our reputation on quality and reliability by carefully specifying products, partnering with trusted manufacturers, and maintaining rigorous quality standards. How to Apply Please submit your resume along with a brief note (a few sentences) about your quality control or troubleshooting experience. We'd love to hear about a time you solved a tough quality problem using engineering analysis or made a process improvement.

Introduction Werfen Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview Position Summary: Performs formulations of Clinical Chemistry, Co-Oximeter, and/or Coagulation controls and reagents using various automated and manual techniques. Formulations are to be performed in accordance with established Quality Standards and GMP requirements Responsibilities Key Accountabilities: Must be capable of performing all duties required of a Formulation Tech I. Assists in the formulation of products with senior team personnel. Must demonstrate good understanding of all team Standard Operation Procedures. Maintains equipment in compliance with Good Manufacturing Practices and written Standards of Procedures. Assists in all areas of team as needed. Maintains manufacturing documentation and records, i.e., Standard Production. Methods, enzyme use logs, sterilization charts, etc. Initiates purchase requisitions for team supplies as needed. All other duties as assigned by manager Budget Managed (if applicable) N/A Internal Networking/Key Relationships To be determined based on department needs Skills & Capabilities: Oral and written communication skills Qualifications Min Knowledge & Experience Required for the Position: B.S. in a Science field or equivalent plus 2 years of experience Physical Requirements This position requires the ability to lift and move materials per current OSHA standards. International Mobility Required: No Travel Requirements: No The hourly wage range Werfen reasonably expects to pay for the position is $25 to $28. Compensation is reasonably based upon multiple factors including education, relevant experience, skillset, knowledge, and specific needs of the business. Closing If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact ****************************** for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. **************

Introduction Werfen Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview Position Summary: Performs formulations of Clinical Chemistry, Co-Oximeter, and/or Coagulation controls and reagents using various automated and manual techniques. Formulations are to be performed in accordance with established Quality Standards and GMP requirements Responsibilities Key Accountabilities: Must be capable of performing all duties required of a Formulation Tech I. Assists in the formulation of products with senior team personnel. Must demonstrate good understanding of all team Standard Operation Procedures. Maintains equipment in compliance with Good Manufacturing Practices and written Standards of Procedures. Assists in all areas of team as needed. Maintains manufacturing documentation and records, i.e., Standard Production. Methods, enzyme use logs, sterilization charts, etc. Initiates purchase requisitions for team supplies as needed. All other duties as assigned by manager Budget Managed (if applicable) N/A Internal Networking/Key Relationships To be determined based on department needs Skills & Capabilities: Oral and written communication skills Qualifications Min Knowledge & Experience Required for the Position: B.S. in a Science field or equivalent plus 2 years of experience Physical Requirements This position requires the ability to lift and move materials per current OSHA standards. International Mobility Required: No Travel Requirements: No The hourly wage range Werfen reasonably expects to pay for the position is $25 to $28. Compensation is reasonably based upon multiple factors including education, relevant experience, skillset, knowledge, and specific needs of the business. Closing If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact ****************************** for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. **************

Job Description : Freshline Produce LLC., a premium fresh fruit and vegetable processor based in Mahwah, NJ, is seeking a talented Quality Assurance Technician, for its 1st shift, to join its fast growing organization. This is perfect opportunity for a candidate looking to begin their QA career in the food industry. Responsibilities: Incoming Raw Materials/ Inspection/ Inform QA Manager and Operations Manager if there are quality issues. Fill out Receiving Log Identify, label, date, and make a daily inventory list of all WIP products in the coolers Production Line Quality Checks including product quality, case quality, Tsunami checks, Metal detector check and room temperature checks Practice and enforce GMP regulations - (Hand washing, no jewelry, no gum) Recognize and examine all inventory at all times Serve as member HACCP Team Requirements: Good communication, training and interpersonal skills Very detail oriented Strong problem solving skills Bi-lingual (English and Spanish) is preferred Experience in the food industry is a plus Effective organizational skill; Able to manage priorities and complexities Intermediate computer skills Proficiency with Microsoft Word, Excel and Outlook Strong multi-tasking skills

At Winland Foods, quality isn't just part of the process-it's who we are. Guided by our values of Excellence, Quality, Integrity, Respect, and Collaboration, our Food Quality Team Members ensure that every product we make is safe, consistent, and worthy of the trust our consumers place in us. As a Food Quality Team Member, you will be on the front line of protecting our standards and reputation. From performing critical inspections to supporting continuous improvement initiatives, you'll play a hands-on role in making sure every product reflects our commitment to excellence. You'll collaborate closely with production and sanitation teams, using your attention to detail and integrity to ensure compliance with food safety regulations and Winland's high expectations. This role is more than checking boxes-it's about leading with care, protecting consumer well-being, and ensuring every bite of our food delivers on Winland's promise of quality and consistency. Employee Type: Full time Location: NJ Fair Lawn Job Type: Production Group Job Posting Title: QA Technician Job Description: Schedule: 5 Day work week which will vary depending on department needs with advance notice with Overtime as required Work Location: 20-01 Broadway, Fair Lawn, NJ 07410 Benefits: Medical, Dental, Vision, 401(k) with match, STD/LTD/AD&D/Life, HSA, FSA, EAP, Hospital indemnity, Accident Insurance, Identity and Fraud Protection Plan, Legal, and Critical Illness. Salary, based on experience and other qualifications: $25.00 Per Hour What a Quality Team Member Does: · Inspect and monitor products throughout the production process, checking for quality, food safety, and regulatory compliance. · Conduct and oversee tasks like sensory testing, label verification, and analytical testing to ensure product attributes are correct. · Manage specialized quality programs and documentation, using technical skills in systems like SAP and other quality management software. · Lead facility inspections, conduct environmental swabbing, and assist with a variety of quality checks and audits. · Collaborate with cross-functional teams to resolve quality issues, investigate customer complaints, and support continuous improvement efforts. Skills a Quality Team Member Demonstrates: · Strong attention to detail and accuracy in every task. · Excellent communication skills and a proactive, team-oriented mindset. · A commitment to maintaining Safe Quality Food (SQF) and Good Manufacturing Practices (GMP) in everything you do. Duties and Responsibilities: This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. Entry Quality Team Member: Safe Equipment Operation & Maintenance: o Perform daily inspections, environmental swabbing, and product inspections. o Verify compliance with established standards Product Handling, Quality Control & Inventory Management o Understand and follow plant policies for placing materials on hold and collecting retention samples. o Assist with inventory control for approved suppliers following FIFO practices. o Help with customer sample requests and microbiological testing for shipping requirements. Food Safety & Sanitation Compliance o Follow GMP, HACCP, SQF, FSMA, and company food safety policies. o Maintain cleanliness and sanitation. o Participate in internal auditing. Team Collaboration, Leadership & Training o Assist team members, adapt to operational changes, and contribute to productivity, safety, and quality goals. Documentation, Communication & Continuous Improvement o Prepare accurate written documentation. o Record inventory transactions, shipments, and quality results in SAP. o Ensure precision in recording and reporting test results. o Support plant trials, process improvements, and cost savings projects. o Participate in 5S efforts. Knowledge, Training and Experience: Education & Experience · High School Diploma or GED required. Degree in Biology, Chemistry or Food Science are preferred. · Minimum 1 year of work experience in manufacturing or food production. · 18+ years of age. Technical & Mechanical Skills · Ability to operate, troubleshoot, and advise on minor adjustments to formulas or processes. · Mechanical aptitude with the ability to identify and resolve quality irregularities. · Proficiency in SAP, hand scanners, and basic math skills. · Advanced levels require proficiency in MII, WE systems, and interpreting line huddle measures to resolve issues. · Computer literacy in Microsoft Word, Excel, PowerPoint, and Outlook. Safety & Compliance · Knowledge of GMPs, SQF, HACCP, FSMA, and other food safety regulations. · Commitment to following all company safety policies and procedures. · Ability to lift up to 50 lbs., push heavy loads, stand/walk up to 90% of shift, and climb as needed. · Must have near and far visual acuity, some color perception, and full range of hand/arm movement. Personal Attributes & Work Ethic · Positive attitude, dependable, self-motivated, and willing to work overtime or weekends as needed. · Strong problem-solving skills, attention to detail, and ability to multitask in a fast-paced environment. · Demonstrated accountability for work quality, attendance, and continuous improvement. Physical Demands: · Employees must be able to stand and walk for extended periods of time. Tasks may involve frequent climbing, pulling, pushing, carrying, grasping, reaching, twisting, turning, and stooping. · Ability to lift up to 50 lbs frequently. · Must have good hand-eye coordination, motor skills, and 20/20 corrected vision. · Must have normal hearing and vision (with correction if needed), including the ability to distinguish colors for color-coded containers in production areas. · Employee must wear all required PPE according to the specific manufacturing environment, as outlined in the Employee Handbook, posted policies, or as directed by leadership. · Must adhere to all safety policies, including lock-out/tag-out, safe lifting techniques, and others as instructed. · Exposure to wet, humid conditions, moving mechanical parts, high areas, fumes, airborne particles, extreme temperatures, electrical risks, and vibrations depending on the area assigned · Must maintain a clean and safe work environment and report any food safety or quality issues immediately to management. EEO Statement: Winland Foods seeks to recruit, develop, and retain the most talented people from a diverse candidate pool, and as a global company we believe our success is enhanced by fostering equity and inclusion in the workplace. Therefore, Winland Foods is committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, gender identity, genetic information, military or veteran status, and any other characteristic protected by applicable law.

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required . Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

Job DescriptionDescription: RK Pharma Inc, a vertically integrated pharmaceutical company with our main manufacturing site in Pearl River, NY, is seeking a Quality Control Chemist to work with our growing Quality Teams as we scale towards commercial manufacturing in the next upcoming months. As a company focused on the development, manufacturing and sale of high quality and affordable generic pharmaceutical products worldwide we are looking for sharp, driven, self-directed individuals to help us grow our mid-stage start-up team. Requirements: If this sounds interesting to you, it's probably because up to this point you have: Bachelor of Science of higher 0-3 years of quality Control experience, preferably in a pharmaceutical, manufacturing, or regulated environment. Familiarity with cGMP, GDP, and standards. Proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint) and experience with ERP or document management systems (e.g., SAP, Master Control). Excellent organization, time management, and communication skills. The main responsibilities for this position are: Perform daily verification /performance check of the QC analytical instruments such as Analytical balance, Microbalance, KF titrator, KF coulometer, Auto titrator etc., Perform calibrations of all the QC analytical instruments/equipment's as per the calibration calendar schedule or when required. Perform Instrument/ equipment performance qualification as and when required. Maintain inventories of chemicals, Standards, samples etc., Operation, calibration, maintenance and qualification of all analytical instruments such as HPLC, GC, TOC, UV, IR, automatic titrator, dissolution equipment, etc. Follow the procedures as per the SOP's/ guidelines. Perform Sampling of raw materials, drug substance, packaging components, stability samples, cleaning samples, In-process samples and finished products. Perform analytical tests and wet chemistry tests on raw materials, drug substance, packaging components, stability samples, cleaning samples, In- process samples and finished products in compliance with the STP and SOP's. Follow and document all test results under GLP, GDP, GMP and Lab Safety guidelines. Document test results, problems and other issues, perform troubleshooting of issues that arise during analysis. Logging various samples received to QC as per the SOP into their respective log books. Monitors Stability chambers, Photostability chamber, freezers, refrigerators etc. Performs Stability samples loading/charging and pull-out according to the stability calendar. Record the results and prepares CoA to be released in a timely manner. Perform analysis using various software's such as Empower, Tiamo, Spectrum two, Flex etc. Write and perform investigation of out of specification results. Train other QC chemists in a timely manner on all the general Laboratory SOPs and test methods. Preparation and review of Standard Operating Procedures, specifications and STP's for Raw materials, Packaging components, drug substances and finished products (based on ICH/Pharmacopeial reference). Preparation and execution of protocols for Method Validations, Method Transfers, Cleaning Validation, Raw material qualifications, Stability studies and any other studies. Maintains lab, instruments, logbooks and notebooks at all times. Maintains lab instruments and performs calibration/preventive maintenance to ensure proper working order and troubleshoot when necessary. Perform additional duties and responsibilities designated by the supervisor on the need basis after receiving the required training. RK Pharma Inc is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to learn and subsequently operate all test equipment within the Laboratory Department Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent 1 year of manufacturing or quality experience is a plus but not required Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Working knowledge of measurement instruments: i.e., calipers, etc. Basic proficiency of Microsoft Excel and Word Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements Must demonstrate acceptable vision requirement.

Overview About LamothermicLamothermic is a second-generation, family-run investment casting foundry known for producing high-quality steel parts with a focus on customer service, technical excellence, and continuous improvement. We serve a wide range of industries with precision-engineered cast components, and we are looking for a hands-on leader to take our CNC operations to the next level The Quality Technician is responsible for supporting all aspects of product and process quality to ensure wax patterns and metal castings meet internal specifications and customer requirements. This position involves performing routine inspections, maintaining quality documentation, and assisting in corrective actions, with a strong focus on dimensional and visual inspection. Knowledge of nondestructive testing (NDT) methods is highly desirable. We offer many perks: Attendance Bonus - Earn up to an extra 50 hours/year 8 paid holidays per year 2 weeks paid vacation after one year Medical/dental packages - 1 employer sponsored pkg at 75% savings 401k program after one year employment Prescription safety eyewear paid by company Reimbursement for steel toe shoes Entry-level candidates are strongly encouraged to apply. On-the-job training is available and preferred, making this an excellent opportunity to grow your skills while contributing to a dynamic team within a manufacturing environment. Compensation up to $25 an hour, commensurate with experience. Qualifications High school diploma or GED required; associate degree or technical training in a related field is a plus. Minimum 2 years of experience in quality control or inspection in a manufacturing environment, preferably metal casting or aerospace. Strong attention to detail and problem-solving skills. Basic understanding of geometric dimensioning and tolerancing (GD&T). Proficient in MS Office (Word, Excel, Outlook). Ability to lift up to 50 lbs. and stand for extended periods. Preferred Skills & Experience but not required: NDT Level II certification or experience in Magnetic Particle Testing (MT), Penetrant Testing (PT), and Radiographic Testing (RT) per SNT-TC-1A or NAS 410 (preferred but not required) . Experience with investment casting processes is a strong plus. Knowledge of quality standards such as ISO 9001, AS9100, or relevant industry-specific standards. Familiarity with CR/DR radiography and reading X-ray images is a bonus. Responsibilities Perform in-process and final inspections of wax patterns, steel and bronze castings. Verify product conformity using measuring instruments (e.g., calipers, micrometers, gauges). Interpret blueprints, engineering drawings, and customer specifications. Maintain accurate inspection records, nonconformance reports (NCRs), and inspection logs. Assist in developing and reviewing work instructions and inspection criteria. Support the disposition and follow-up of nonconforming material. Collaborate with production, engineering, and quality departments to resolve quality issues. Contribute to continuous improvement efforts (e.g., 5S, root cause analysis, corrective/preventive actions). Company Website **************************** Company Profile Careers - Lamothermic Corp. Are you looking to work for a continuously developing company, where the culture is focused on teamwork and development? Look no further. Working at Lamothermic, you will join a team whose goal is simple - employ the best people, technology, processes and materials to provide our customers with quality investment castings. Lamothermic is your premier supplier of precision investment castings - quality first, every time. Our commitment to superior quality combined with our best in class engineering and advanced automation means that our customers get the best castings for their needs. Are you looking to work for a continuously developing company, where the culture is focused on teamwork and development? Look no further. Working at Lamothermic, you will join a team whose goal is simple - employ the best people, technology, processes and materials to provide our customers with quality investment castings. Lamothermic is your premier supplier of precision investment castings - quality first, every time. Our commitment to superior quality combined with our best in class engineering and advanced automation means that our customers get the best castings for their needs.

QUALITY CONTROL - WALDWICK NEW JERSEY START NOW !!!!!!!!!!!!!!!!!! ** We are looking for reliable and responsible candidate for warehouse associate in Waldwick. Pay rate: $13.50 (NEGOTIABLE DEPENDING ON EXPERIENCE) 2nd shift QA( Quality Assurance) Train for 2 weeks on 1st shift MONDAY - FRIDAY ( 7am-3:30pm) Regular hours MONDAY - FRIDAY 3pm-11:30pm OVERTIME AVAILABLE Must work weekends.( rotate) Requirements: Computer Knowledge, Inspecting Materials, Test Samples Able to stand all day performing this job. Bilingual is a plus Must have transportation Benefits offered - Health Care Sick Pay 401 k offered in 2021 MUST HAVE TRANSPORTATION!!!!!!!!!!!!!!!! Start now! Vaccinated

Job DescriptionDescription: : Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. "Offer of employment is contingent upon successfully completing DOT background check screening and drug testing required by federal regulation for this role." Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program Requirements:

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program

Full-time Description About Generant: Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets. Generant is 100% employee-owned and is headquartered in Butler, NJ where most valve and regulator products are manufactured. We look for dedicated and talented people who accept the responsibilities of thinking like owners and embrace our mission as stated in our Quality Policy: “Our Goal is to provide our customers, suppliers and employees true value. We believe this can only be accomplished through a strong commitment to continuous improvement in the quality of our products, services and working environment.” Our ideal candidates: Are people who are personally motivated to produce high-quality work Are lifelong learners - driven to continually improve Are well organized Enjoy working in a team environment Join our growing team and be a part of our journey! Generant is looking for a 3rd shift Quality Control Inspector Join our growing company! 3rd shift is Monday - Friday. 11:00pm - 07:30am Job Summary: The primary function of the Quality Control Inspector is to help assure the quality of finished goods and conformance to product requirements. This is accomplished by inspecting parts, checking calibration status of measurement devices, and documenting inspections and nonconformance. Essential Functions: · Conduct First Article Inspection and in-process inspections of products to ensure compliance with quality standards and specifications. · Maintain Calibration of Metrology Tools · Perform In-Process inspections, Final Inspection, Raw Material Inspection - Bar Stock, Inspection of Incoming Purchased Parts, and Outside Process Inspection · Data Entry into Quality Databases · Interpret mechanical drawings · Communicate product and material nonconformances to management. · Identify and report any deviations from quality standards to the appropriate personnel · Collaborate with production teams to resolve quality issues and implement corrective actions · Conduct root cause analysis and implement preventive measures to minimize defects and improve product quality · Maintain accurate records of inspections, test results, and quality documentation. · Assist in the development and implementation of quality control procedures and processes · Other duties as assigned Requirements Qualifications: Education/Experience/Skills: · High School Diploma or equivalent · 2+ years as a Quality Control Inspector in a manufacturing environment that produces metal pieces · Able to read and interpret engineering drawings · Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators · Advanced Math Skills · Strong knowledge of Statistical Process Control (SPC) techniques and tools · Familiarity with quality control standards and regulations · Must be able to work in a fast-paced environment · Excellent attention to detail and analytical skills · Ability to work independently and as part of a team · Fluent in English (Good Verbal and Written Communication Skills) · Ability to carryout detailed, written and verbal instructions Physical Demands: · Must frequently lift up to 25 pounds and occasionally lift up to 75 pounds · When performing the duties of this job, the employee is regularly required to sit, use hands to finger or handle or feel objects and tools or controls and talk or hear · Employee is frequently required to reach with hands and arms · Employee is occasionally required to stand, walk, stoop, kneel, crouch, or crawl · Specific vision abilities require close vision, distant vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment: · Inspector works near moving mechanical parts and is occasionally exposed to vibration · Noise level is usually moderate for a manufacturing plant Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Benefits: Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&D Insurance Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to operate all test equipment within the Laboratory Department Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Compile, review data and complete test reports IAW CTG Standards Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent with a minimum of 2 years' experience performing in-process and final inspection preferably in a machining, automotive or aerospace business Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word Independent; can work with limited supervision and direction Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements ASQ CQI certified or must completed certification within 1 year of accepting position Strong Electronics inspection knowledge preferred Must demonstrate acceptable vision requirement.