Quality control technician jobs in Denver, CO - 315 jobs

The Quality Control Technician at our 503B outsourcing facility is responsible for ensuring that all products meet the highest standards of quality and safety before they reach our clients. This role involves performing various tests and inspections on raw materials, in-process samples, and finished products, and environmental monitoring in cleanroom environments. The Quality Control Technician will work closely with production, quality assurance, and other teams to identify and resolve any quality issues, maintain accurate documentation, and support continuous improvement initiatives. This position requires a strong understanding of Good Manufacturing Practices (GMP), FDA regulations, and 503B guidelines, along with excellent attention to detail and analytical skills. Responsibilities Conduct routine testing and inspection of raw materials, in-process samples, and finished products to ensure compliance with established quality standards and specifications. Perform environmental monitoring, including sampling of air, surfaces, and personnel in cleanroom environments, ensuring adherence to GMP regulations. Maintain accurate and detailed records of all quality control activities, including test results, deviations, and corrective actions. Collaborate with production and quality assurance teams to investigate and resolve any quality issues or non-conformances. Operate and maintain laboratory equipment, ensuring proper calibration and function according to standard operating procedures (SOPs). Participate in the validation and qualification of new equipment, processes, and methods to ensure consistent quality and reliability. Assist in the development and revision of SOPs, work instructions, and other quality-related documents. Ensure timely and accurate completion of all required documentation and reports, maintaining compliance with FDA regulations and 503B guidelines. Support internal and external audits by providing necessary documentation and responding to audit findings in a timely manner. Stay current with industry trends, regulatory updates, and best practices related to quality control and 503B outsourcing facilities. Assist in the training and mentoring of new quality control staff, ensuring adherence to company policies and procedures. Work closely with the Quality Assurance team to implement and monitor quality improvement initiatives. Conduct stability testing and data analysis to ensure product integrity over specified shelf life. Physical Requirements Must possess 20/20 vision (with or without correction) and be able to pass vision and colorblindness test Qualifications TRAINING (e.g. Professional Qualifications, On-the-job Training, Education) An equivalent combination of education, training, and experience may substitute. High School Diploma or equivalent College degree preferred Exceptional attention to detail Current Good Manufacturing Practices (cGMP) Experience Preferred Good Documentation Practices (cGDP) experience preferred Cleanroom experience & experience wearing Personal Protective Equipment (PPE) preferred Excellent verbal and written communication skills Experience with Microsoft Office Suite (Word, Excel) and ability to utilize various software programs Strong work ethic and ability to work effectively as a team The Quality Control Team provides critical support to the Production Team. This is a 100% on-site position. Reliable transportation and punctuality are required Must be able to lift items repeatedly (lifting as a team for heavier items) Must be able to work in a variety of positions and locations such as sitting, standing, squatting, kneeling, reaching, and walking, for prolonged periods of time Must be able to wear required PPE for extended periods of time Position requires handling of laboratory chemicals or hazardous materials Must be able to use necessary equipment such as computers, scanners, or other technology devices as assigned Travel As part of your job duties, travel may be required. If applicable, you will be compensated at the current IRS mileage reimbursement rate.

Civil Technology Inc. (CTI) is seeking a qualified Field Quality Control Manager to support work to modify and upgrade Baggage Handling Systems (BHS) at Denver International Airport (DEN). This role is instrumental in ensuring the BHS scope is completed as designed and expected, and will work closely with another quality inspector to review design documents and inspect field installation of the BHS system. We are specifically looking for a professional with hands-on experience inspecting electrical systems and process control systems for conveying/transport systems. Prior BHS experience is ideal-however, experience from industrial manufacturing environments manufacturing facilities can translate extremely well to this role. This position will primarily be on the day shift, with flexibility required as construction activities may drive off-hour and night inspections. Key Responsibilities Review project documents including construction drawings, submittals, shop drawings, and approved installation methods related to the BHS installation. Verify BHS components received onsite are supplied and installed in accordance with construction documents, shop drawings, submittals, RFIs, and Certificate of Compliance requirements. Perform shop inspections when needed to confirm compliance and readiness for installation. Verify electrical installation is completed in accordance with approved documents and related RFIs, including: Main power and control power Motors, conveyors, and BHS control systems Inspect and validate process control systems supporting BHS operations, including control devices and logic-driven conveying systems. Perform required site inspections and complete Quality Control Inspection Reports in ACC. Prepare Quality Reports in ACC for night shift inspections, ensuring required inspection scope is understood and executed by night inspectors. Meet with DEN QA representatives, attend quality follow-up inspections, and prepare Quality Reports in ACC. Attend meetings and inspections with DEN Operations (Log Plan) and prepare special reports for distribution with the project team. Perform inspections to document construction progress and re-inspect open structural, electrical, and mechanical issues, tracking status and resolution in ACC. Participate in planned temporary mock-up installations, including conveyor system electrical and control device installation. Provide extensive coordination between contractor personnel/activities and owner representatives to ensure BHS systems are installed correctly and operate as expected. Communicate clearly and professionally (written and verbal) to support issue resolution and maintain alignment across the team. Support other quality-related activities as requested. Preferred Experience Previous work experience with baggage handling systems (BHS) (highly preferred) Strong background inspecting: Electrical systems for conveying and transport systems Process control systems and logic-driven equipment In lieu of direct BHS experience, applicable experience from industrial/manufacturing conveying systems, including: Bottle/can manufacturing facilities (Pepsi, Coca-Cola, Coors, etc.) Automated production lines with process control and sequencing logic Experience supporting manufacturing plants and operations Aviation experience (preferred) Experience working on large, complex, active facilities requiring detailed coordination and communication Work Location & Requirements Work is located 100% onsite at Denver International Airport (DEN) Must be able to pass all required background checks for airport badging and access Why Join CTI? High-Impact Work: Be part of transformational projects shaping Denver's infrastructure. Competitive Compensation: Strong salary and opportunities for growth. Family-Oriented Culture: Supportive, close-knit environment that values collaboration and communication. Tangible Benefits: Full benefits package, competitive 401(k) matching, certification support, and more. Big Impact, Small Team: Your contributions won't get lost in the crowd-they'll be recognized and appreciated. Commitment to Diversity: Certified SBE, M/WBE, DBE, and ESB; we value every voice. Cutting-Edge Projects: Work on complex, high-profile construction management efforts at DEN and beyond. Continuous Learning: Professional development and certification support are core to our culture. Small Business Advantage: Agility and entrepreneurial spirit with the resources and reach of legacy projects. Additional Benefits 401(k) with match Cell phone reimbursement Dental insurance Fuel discounts Health insurance Paid time off Professional development assistance Performance bonuses About Civil Technology Inc. Since 1989, Civil Technology, Inc. (CTI) has been pushing the boundaries of construction and program management in Denver for decades. We don't just manage projects-we elevate them. From pre-design to the final closeout, our team delivers unmatched expertise, ensuring every project not only meets but exceeds expectations.

The Travel Cath Lab Technologist role involves performing cardiac catheterization and electrophysiology procedures in a clinical setting, primarily working day shifts for a 13-week travel assignment. Candidates must have cath lab experience and certifications such as RN, RCIS, or RCES, with preferred additional skills in pediatric and EP procedures. The position offers benefits including dental, vision, referral bonuses, continuing education, and life insurance through HealthTrust Workforce Solutions, a healthcare staffing organization. HealthTrust Workforce Solutions HCA is seeking a travel Cath Lab Technologist for a travel job in Denver, Colorado. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 10 hours, days Employment Type: Travel Must have: candidates without these skills will not be considered for the role. • Cath lab experience (RN, RCIS, RCES) • ACLS, PALS preferred Preferred or nice to have: candidates with these skills will be considered first. • EP experience • Cath lab peds experience List typical procedures performed on unit(s): • LHC/RHC, Congenital, vascular and EP procedures Tell us about the unit(s): Number of Beds - 4 CV labs Number of Staff - 8 Type of staff: Day Shift - (example 1 charge, 3 RN, 2 CNA, and 1-3 sittershour days or 5 8 hour days with weekly night call and rotating weekend call Type of equipment - GE EMR - Mac Lab and Meditech About HealthTrust Workforce Solutions HCA At HealthTrust Workforce Solutions, healthcare is not just about the four walls of a facility but about the people who provide and receive care. Our focus is on empowering healthcare professionals to deliver exceptional patient experiences by providing them with the necessary skills, tools, and support. We partner with healthcare facilities nationwide to ensure that the right professionals are in the right roles. We prioritize our clinicians by giving them a voice and access to opportunities to fulfill their mission of improving lives by providing quality patient care. We are committed to our core values of Trust, Innovation, Adaptability, Courage, and Accountability. We are dedicated to positively impacting the healthcare industry by providing first-priority access to more than 200,000 jobs nationwide to our healthcare professionals. Join us and be part of the HealthTrust family, where you can make a difference every day. We embrace our changing environment, and we maintain a culture that has a rich tradition of transforming itself to meet the challenges of the future. MISSION STATEMENT While putting great people in the right roles is essential, our mission is far greater. We want our clinicians to be part of the HealthTrust family, where healthcare professionals have a voice and are empowered with the right tools and opportunities to fulfill their personal mission of improving lives. Plus, as a preferred partner to thousands of top-performing hospitals, we provide our healthcare professionals with first-priority access to more than 200,000 jobs nationwide. Benefits Dental benefits Vision benefits Referral bonus Continuing Education Life insurance Keywords: Travel Cath Lab Technologist, Cardiac Catheterization, Electrophysiology Procedures, RN RCIS RCES, Healthcare Travel Jobs, Cardiovascular Technician, Cath Lab Experience, HealthTrust Workforce Solutions, Continuing Education Healthcare, Denver Healthcare Jobs

First Connect Health is seeking a travel Cath Lab Technologist for a travel job in Lakewood, Colorado. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: 02/01/2026 Duration: 13 weeks 40 hours per week Shift: 10 hours, days Employment Type: Travel Cath Lab Technologist 2+ years of experience • Certifications Required: ACLS (AHA), BLS (AHA) • Credentials: RCES (CCI) and RCIS (CCI) 4x10 Days About First Connect Health At First Connect Health, we take pride in being a Joint Commission-certified healthcare staffing agency, headquartered in Newark, New Jersey. This prestigious certification is more than just a seal - it's a reflection of our commitment to excellence, safety, and quality in everything we do. By meeting the rigorous standards set by The Joint Commission, one of the most respected accrediting bodies in healthcare, we've demonstrated that our processes, compliance, and patient care standards are aligned with the highest levels of quality in the industry. But our dedication goes beyond certifications. Nurses choose First Connect Health because: Trust and Transparency: We foster honest communication, timely updates, and full transparency throughout your placement journey. Best Pay & Benefits: We offer industry-leading compensation packages, along with benefits that support your career goals. Flexibility & Choice: Whether you're seeking short-term assignments, long-term contracts, or local opportunities, we provide the flexibility to suit your preferences. Personalized Support: Our recruiters take the time to understand your needs, guiding you with care, respect, and responsiveness at every step. When you work with First Connect Health, you're not just another number - you're a valued professional. Join a team that's focused on your success, your well-being, and your future in healthcare. Benefits Medical benefits Sick pay 401k retirement plan Weekly pay Referral bonus

MedPro Healthcare Allied Staffing is seeking a travel Cath Lab Technologist for a travel job in Englewood, Colorado. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 10 hours, days Employment Type: Travel MedPro Healthcare Staffing , a Joint Commission-certified staffing agency, is seeking a quality Cath Lab Technologist for a contract with one of our top healthcare clients. Requirements Current License in good standing Appropriate specialty certifications/credentials Two years of Cath Lab experience preferred, ideally in a critical care setting. Benefits Weekly pay and direct deposit Full coverage of all credentialing fees Private housing or housing allowance Group Health insurance for you and your family Company-paid life and disability insurance Travel reimbursement 401(k) matching Unlimited Referral Bonuses up to $1,000 Duties Responsibilities The primary responsibility of the Cath Lab Tech is to provide assistance with patient care in the cardiac catheterization lab (CCL) through the provision of technical assistance to the cardiac catheterization team. Provides direct, safe, competent and quality patient care in the Interventional Cardiology department. Assists in the performance of various invasive cardiac or peripheral vascular diagnostic and therapeutic procedures. Sustains a high level of patient care by communication with the patients, families, and physicians and co-works to address the physical, general and psychosocial needs of the patient. Functions under the direction and immediate supervision of the cardiologist/radiologist performing the procedure. Assists cardiologist during procedures by operating ancillary equipment, anticipating and obtaining catheters, wires and other necessary inventory and medications as ordered. Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines. Delivers quality, cost-effective patient care in a professional manner. Works effectively to maintain an environment of excellence, which is patient-focused, providing timely, compassionate, quality patient care. Promotes and maintains a safe work environment for both staff and customers, incorporating national patient safety initiatives. Prepare and update patient records accurately and legibly. About Agency MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Cath Lab Technologist, EKG Tech, Electrocardiograph Tech *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx00000BILndEAH. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Technologist Cath Lab: Cath Lab Technologist. About MedPro Healthcare Allied Staffing At MedPro Healthcare Staffing , we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we'll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team-alongside a compassionate group of experienced recruiters-provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we're committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience , we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits Day 1 medical, dental, and vision benefits for you and your family Weekly pay and direct deposit Unlimited Referral Bonuses starting at $500 On Staff Clinical Support Team Access to nationwide travel assignments MPX+ Mobile appreal-time access to jobs, credentials, assignment details, and more Full coverage of all credentialing fees Private housing or housing allowance Tax Free Per Diems, Housing Stipends and Travel Reimbursements Company-paid life and disability insurance Travel reimbursement 401(k) matching Benefits Weekly pay Employee assistance programs Referral bonus

GLC On-The-Go is seeking a travel Cath Lab Technologist for a travel job in Englewood, Colorado. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Duration: 13 weeks 36 hours per week Shift: 12 hours Employment Type: Travel GLC is hiring: RAD Tech Cardiac Cath Lab - Englewood, CO - 13-week contract GLC - Named Best Nurse Agency 2024-2025 We connect nurses, nursing professionals, and allied health professionals like you to contracts that align with your skills, schedule, and career goals. About this Assignment Join the care team in Cardiac Cath Lab where you'll provide patient-centered care in a collaborative environment. Typical responsibilities include direct patient care, timely documentation, and coordination with the care team. Specific duties will be confirmed during your interview with a recruiter. Assignment Details Location: Englewood, CO Assignment Length: 13 weeks Start Date: 02/23/2026 End Date: 05/25/2026 Pay Range: $2,325 - $2,583 Minimum Requirements Active license in Cardiac Cath Lab 1 year full-time RAD Tech, Cardiac Cath Lab experience within the last 2 years What you can expect from GLC Weekly on-time pay with direct deposit Transparent communication, clear assignment details, and recruiter support from start to finish - or extension Referral bonus up to $500 Health, dental, and vision insurance 401(k) plan Completion and signing bonuses may also be available Ready to move forward? Apply now and start your rewarding journey with GLC - a recruiter will connect quickly to review pay, start date, and assignment details so you can make the best decision for your next contract. GLC On-The-Go Job ID #489781. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: TRAVEL - Cath Lab Tech/ Cardio EP Specialist (746) - Swedish MC - 6:30AM - 4:00PM About GLC On-The-Go GLC is more than just a staffing agency - we're your trusted partner in finding travel, local, and PRN contracts that align with your career aspirations and lifestyle. We specialize in connecting travel nurses and allied healthcare professionals like you with opportunities in acute care, long-term care, behavioral health, and allied fields across the U.S. Our attentive and friendly recruiters are always just a call or text away, ready to guide you at every step, ensuring you feel valued and heard. We understand the unique needs of travel healthcare professionals, which is why we offer comprehensive benefits and 24/7 support. Join GLC, where our 20+ years of experience mean we know how to help you find the assignments that turn your career goals into reality. With us, it's not just a placement - it's your dream career made possible

A Travel Cath Lab Technologist provides specialized cardiac catheterization laboratory services on a temporary basis, supporting cardiovascular diagnostic and interventional procedures. This travel assignment in Littleton, Colorado offers a 13-week duration with 40 hours per week on day shifts. Benefits include comprehensive health coverage, housing support, and educational reimbursements to ensure a comfortable and supported work experience. Host Healthcare is seeking a travel Cath Lab Technologist for a travel job in Littleton, Colorado. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel Host Healthcare Job ID #a1fVJ000006yR57YAE. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Tech About Host Healthcare At Host Healthcare, we provide a truly comfortable experience as you explore your travel nursing, therapy, or allied career. We make your travel healthcare journey easy by taking care of all the details, so you don't have to. We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what's important to you. During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more. We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment. Travel comfortably with Host Healthcare. Benefits Referral bonus School loan reimbursement Vision benefits Wellness and fitness programs Company provided housing options License and certification reimbursement Life insurance Medical benefits Mileage reimbursement Pet insurance Discount program Employee assistance programs Guaranteed Hours Health savings account Holiday Pay 401k retirement plan Continuing Education Dental benefits Keywords: Cath Lab Technologist, Cardiovascular Tech, Travel Healthcare, Cardiac Catheterization, Interventional Cardiology, Temporary Healthcare Staffing, Travel Nursing, Medical Technician, Patient Care, Health Benefits

Our promise to you: Joining AdventHealth is about being part of something bigger. It's about belonging to a community that believes in the wholeness of each person, and serves to uplift others in body, mind and spirit. AdventHealth is a place where you can thrive professionally, and grow spiritually, by Extending the Healing Ministry of Christ. Where you will be valued for who you are and the unique experiences you bring to our purpose-minded team. All while understanding that together we are even better. All the benefits and perks you need for you and your family: * Benefits from Day One: Medical, Dental, Vision Insurance, Life Insurance, Disability Insurance * Paid Time Off from Day One * 403-B Retirement Plan * 4 Weeks 100% Paid Parental Leave * Career Development * Whole Person Well-being Resources * Mental Health Resources and Support * Pet Benefits Schedule: Full time Shift: Day (United States of America) Address: 2525 S DOWNING ST City: DENVER State: Colorado Postal Code: 80210 Job Description: Adjusts approach based on patient and family understanding of test procedures and troubleshoots equipment malfunctions or patient issues. Prioritizes clinical and administrative work independently and identify process improvements. Other duties as assigned. Assists physicians in performing specialized cardiovascular procedures, including diagnostic and interventional catheterization, pacemaker/defibrillator implantation, intra-aortic balloon pump operation, and electrophysiology studies. Evaluates and documents patient status, responding appropriately to ensure optimal outcomes. The expertise and experiences you'll need to succeed: QUALIFICATION REQUIREMENTS: Bachelor's, Technical/Vocational School (Required) Advanced Cardiac Life Support Cert (ACLS) - RQI Resuscitation Quality Improvement, Basic Life Support - CPR Cert (BLS) - RQI Resuscitation Quality Improvement, Certified Surgical Assistant (CSA) - EV Accredited Issuing Body, Registered Cardiac Electrophysiology Specialist (RCES) - EV Accredited Issuing Body, Registered Cardiovascular Invasive Specialist (RCIS) - EV Accredited Issuing Body, Registered Technologist - Cardiac-Interventional Radiography (R.T(CI)(ARRT)) - EV Accredited Issuing Body, State Certified Surgical Technologist (CST) - EV Accredited Issuing Body Pay Range: $32.53 - $60.50 This facility is an equal opportunity employer and complies with federal, state and local anti-discrimination laws, regulations and ordinances.

Join a leading life sciences company as a Lab Technician, where you will play a crucial role in ensuring the safety and quality of products across various industries. You will be part of a dynamic team focused on making life and our environment safer, healthier, and more sustainable. Responsibilities Split and homogenize incoming samples in compliance with standard operating procedures and quality systems. Maintain and care for equipment associated with sample processing. Prepare test samples by splitting, grinding, and homogenizing aseptically for further testing. Clean the workplace and equipment following standard operating procedures and general housekeeping requirements. Provide feedback to department management for procedural improvements. Monitor and meet turnaround time (TAT) requirements for sample workflow, informing management of any anticipated delays. Perform operational qualifications prior to analysis as per standard procedures. Log and deliver sample splits to testing departments, obtaining necessary signatures. Log, store, and properly discard sample retains according to procedures. Perform environmental monitoring as needed. Assist in client sample processing with appropriate media and support other technicians in weekly sample preparation and aseptic operations. Essential Skills High School Diploma Proficiency in computers and Excel Ability to work cooperatively and independently Effective verbal and written communication skills Interest or focus in science, biology, or microbiology Authorization to work in the United States indefinitely without restriction or sponsorship Additional Skills & Qualifications Associates Degree or Bachelors Degree preferred Experience in food service is beneficial Ability to lift 50 lbs Punctual, team player, with a growth mindset Experience from a stable work history is advantageous Work Environment Work in a production-based analytical lab with a team of 11 technicians. The shift is Monday through Friday from 12:00 PM to 8:30 PM. The lab handles a variety of samples, including protein bars, skincare products, produce, and raw meat, under ambient and cold conditions. Tests conducted include meat study validation and detection of pathogens such as Salmonella, Listeria, and E. Coli. Job Type & Location This is a Contract to Hire position based out of Lafayette, CO. Pay and Benefits The pay range for this position is $18.50 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lafayette,CO. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Core Hours Tuesday - Saturday, 7:00 am - 3:30 pm Purpose and Scope Performs routine testing of raw materials, cleaning samples, bulk intermediate and finished product, and/or stability samples, according to established regulatory protocols and procedures. Essential Duties & Responsibilities Prioritizes tasks and performs job duties with minimal guidance from management. Works to complete tasks in an efficient manner, and is a productive member of the department. Performs analyses on a variety of samples using intermediate preparation techniques and analysis methods. Employee will be trained and become proficient in the intermediate preparation techniques and analysis methods. Actively contributes to short-term team objectives, focusing on routine tasks while ensuring consistency and quality. Develops and implements strategies to overcome daily challenges and improve workflows. Applies intermediate technical skills and a foundational understanding of cGMP, organizational structure, and departmental processes to complete standard work assignments. Takes the initiative to support projects and actions demonstrating a continuous improvement mindset. Delivers high-quality work on a consistent basis, meeting deadlines and maintaining reliability in daily tasks. Proactively develops actionable solutions based on an understanding of the problem, collaborating with team members when necessary to ensure the solution is effective and aligns with organizational goals and regulatory requirements. Demonstrates strong focus and concentration to complete tasks with minimal mistakes, maintaining quality under pressure, and ensuring focus during work to support infrequent preventable errors. Takes responsibility for individual contributions and accepts accountability for performance. Actively participates in team activities, challenges, and shared responsibilities (such as T-cards, archival, etc.), showing enthusiasm and a can-do attitude to inspire others, while maintaining professionalism. Overcomes challenges with a positive attitude, staying focused on the goal even in the face of setbacks Models good laboratory stewardship by maintaining a clean, orderly and safe work environment and proactively restocks low inventory items and routine lab supplies. At the direction of management, trains junior analysts in analysis methods and lab techniques. Accountable for documenting all activities and maintaining records according to good documentation practices. Accountable for proper use, care and maintenance of instrumentation. Provides detailed accounts of testing performed to investigators. Under the direct supervision of an investigator, may perform investigational testing. Makes scientific recommendations to management/technical writers regarding QC procedures. Completes tasks on time and works to eliminate repeat errors. Follows all procedures applicable to job functions to ensure high quality of work. Responsible for ensuring that company and regulatory data integrity guidelines are consistently followed. Accountable for maintaining an atmosphere of teamwork, cordiality and respect towards co-workers and is willing to assist co-workers in the completion of tasks. Performs intermediate method transfers. Represents the department by providing accounts of testing performed and results of method transfer activities and assists with troubleshooting aberrant method transfer results, if necessary. Interacts respectfully with all other employees both inside and outside of the department and members of management and shows interest in others' input and reasoning. Appropriately resolves differences of opinion. Upon delegation, may be responsible for representing the QC chemistry laboratory when communicating with outside departments and vendors. Identifies issues and escalates those issues to the department senior leadership or management as appropriate. Participates in required annual hazardous waste training. Hazardous waste involvement may include, but is not limited to container and tank management and inspections, generation of hazardous waste as a part of production or sampling processes and transfer of hazardous waste between lab procedure area, satellite accumulation and storage. Respond to spills per the Chemical Spill Procedures. Performs additional duties as assigned. Knowledge, Skills & Abilities Knowledge of a government regulated pharmaceutical laboratory environment, preferably for drugs or medical devices including cGMP, GLP and ICH and their application to laboratory testing and review processes and procedures. Intermediate understanding of the use of USP, NF and other compendia. Ability to use and maintain analytical laboratory instruments such as HPLC, FTIR, GPC, GC, Dissolution and UV-Vis spectrophotometers. Effective written and oral communication skills. Knowledge of computer systems for sample tracking, laboratory equipment, chromatography, raw data handling and storage. Ability to interpret, understand and follow analytical procedures/calculations and scientific principles. Core Values This position is expected to operate within the framework of Tolmar's Core Values: Center on People: We commit to support the well-being of our patients. We are committed to treating our employees and those we serve as valued partners. By placing people at the heart of our actions, we actively engage, invigorate, acquire knowledge, and grow together. Are Proactive & Agile: We embody a culture of engagement and action. With a hands-on approach, we fearlessly adapt to change. We anticipate, respond swiftly and efficiently to ignite a spirit that propels us towards extraordinary outcomes. Act Ethically: We are committed to consistently conducting our business in an ethical, compliant, and socially aware manner, in line with our purpose of positively impacting lives. We actively cultivate diversity, equity, inclusion & sustainability in our workplace. Constantly Improve: We are committed to a collaborative & proactive effort to improve our products, systems, processes, and services by reducing waste, increasing efficiency & improving quality. Are Accountable: We think, act, and communicate with honesty, transparency, and clarity in alignment with our core values. We don't compromise our values for near term gain. We take accountability & ownership of our work, actions, successes, and setbacks. We strive to deliver our best as we shape the future. Education & Experience Bachelor's degree in scientific discipline, preferably in Chemistry or Biochemistry. Two or more years of experience in a QC analytical laboratory position in the pharmaceutical industry. Experience with chromatography software. Working Conditions Laboratory setting. Will be exposed to solvents, bio-hazardous materials, hazardous waste, and pharmaceuticals. Must be adaptable to shifting priorities and operate with a sense of urgency while maintaining high quality in order to meet important timelines in a high throughput lab. Business demands may present a need to work extended hours. Compensation and Benefits Pay: $36.00 - $37.00 per hour, depending on experience, plus shift differential following training Benefits summary: careers/employee-benefits Tolmar compensation programs are focused on equitable, fair pay practices including market-based base pay and a strong benefits package. The final compensation offered may vary from the posted range based on the selected candidates qualifications and experience. Tolmar is an Equal Opportunity Employer. We do not discriminate on the basis age 40 and over, color, disability, gender identity, genetic information, military or veteran status, national origin, race, religion, sex, sexual orientation or any other applicable status protected by state or local law. It is our intention that all qualified applicants be given equal opportunity and that selection decisions are based on job-related factors. Qualifications EducationBachelors of Chemistry (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Title: ACI-Certified Commercial Concrete Technician Employment Type: Full-Time | Direct Hire About the Role We are seeking an ACI-Certified Commercial Concrete Technician to support high-profile commercial and infrastructure projects throughout the Denver metro area. This role is ideal for a detail-oriented professional who takes pride in quality control, testing accuracy, and compliance with industry standards. You'll work closely with project managers, inspectors, and field teams to ensure concrete materials and placements meet specifications, codes, and ACI requirements. Key Responsibilities Perform field and laboratory testing of concrete, including slump, air content, temperature, and compressive strength Conduct inspections and testing in accordance with ACI, ASTM, and project specifications Accurately document test results and prepare detailed reports Communicate findings with project teams, contractors, and engineers Ensure quality control compliance on commercial construction projects Maintain testing equipment and follow safety procedures at all job sites Travel to multiple job sites throughout the Denver metro area as needed Qualifications Active ACI Concrete Field Testing Technician - Grade I certification (required) 2+ years of experience on commercial concrete projects preferred Strong understanding of ACI, ASTM, and construction quality standards Ability to work independently in the field with minimal supervision Comfortable working outdoors in varying weather conditions Strong attention to detail and documentation skills Valid driver's license and reliable transportation Compensation & Benefits Competitive hourly pay or salary (based on experience) Overtime opportunities Full benefits package including medical, dental, vision, and PTO Long-term stability with consistent commercial project work Opportunity for advancement and additional certifications

Starting compensation: $25.00 per hour (plus a $1.50 shift differential) Shift Days: Sunday to Thursday Shift Hours: 2:30 PM to Close Shamrock anticipates closing the application window for this job opportunity on or before December 31, 2026 Lead Quality Control Technicians in maintaining all aspects of Quality Assurance to ensure proper, safe and exceptional operation of the department. Essential Duties: * Audit products for quality and safety prior to sending them out to customers. * Audit incoming raw materials for supplier specifications, quality, and food security. * Review incoming ingredients for allergen checks and quality standards. * Responsible for compliance with all regulations and food safety including allergen and pest control. * Fill out necessary paperwork for product audits and HACCP documents. * Review HACCP documents prior to handing paperwork to QA Supervisor/Manager. * Work with operational teams on paperwork, quality checks, and HACCP procedures. * Ensure adherence to all standard work processes, including the Production Sanitation processes. * Aid in plant training requirements and conduct plant training sessions as needed. * Work with QA leaders to ensure plant training requirements and frequencies are met. * Recognize and escalate risks and/or improvement opportunities to improve plant performance. * Other duties as assigned. Qualifications: * High School Diploma or GED. * 3+ year's meat and/or protein experience. * HACCP certified, preferred. * Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends, and holidays. Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education, wellness programs. Equal Opportunity Employer Shamrock Foods Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

This position functions primarily in a classified ISO-7 environment and requires the individual to wear appropriate PPE. This position will support sterile filling operations and perform other duties, such as cleaning, restocking, visual inspection, and labeling, as required and/or assigned. All assigned tasks must be conducted in adherence with all applicable procedures, cGMPs, company policies and any other quality or regulatory (Ex: OSHA, DEA, FDA, etc.) requirements. Facility is a multiple shift operation where variable shifts, including overtime and/or weekends, may be required. Tuesday to Friday, 3 PM to 1:30 AM Safety and Responsibilities SAFETY Strictly adhere to all cGMP, health and safety requirements, procedures, and corporate policies. Authorized to immediately stop any task that is determined to be an imminent hazard. Always promote and demonstrate safe work practices and adhere to PPE requirements. Safely handle chemicals, corrosives, solvents, and other pharmaceutical compounds. Demonstrate physical ability to lift a minimum of 50 lbs. and push/pull pallets, product cans, etc. multiple times per shift. PRIMARY RESPONSIBILITIES: Perform ISO-7 support functions for aseptic filling operations consistent with established protocols, procedures, and regulatory/cGMP requirements. Learn to utilize all relevant equipment/technology for filling operations. Responsible for acquiring and maintaining classified area gowning qualification. Complete and document required training to gain proficiency for all assigned job tasks. Accurately and contemporaneously document all actions performed per GDP standards. Assist with classified and non-classified area cleaning and maintenance as required. Perform visual inspection, labeling, and additional support tasks as required. Make recommendations for process improvements. Possess the ability to master multiple processes across different areas. Recognize and respond appropriately to equipment/documentation issues and deviations; obtain appropriate clarification and guidance from leadership before proceeding. Maintain a quality focused, “Right First Time”, attitude. Values and Behaviors Arrive for work on-time, prepared to work in the classified environment for the majority of each shift. Operate with Integrity by maintaining high ethical standards. Treat all employees with trust, respect, and professionalism. Speak up and hold others accountable for high integrity by providing constructive feedback. Take accountability for individual and team mistakes and participate in related corrective actions. Ensure patient safety by understanding you and your team's impact on product quality. Excel within a diverse and high performing team. Remain open to new ideas and perspectives, communicate across shifts as required, and comply with site process to create a safe work environment. Demonstrate a passion to perform by meeting personal and departmental goals. Self-driven and self-accountable, performs required tasks, and progresses on qualifications within reasonable timelines. Demonstrate innovation abilities by identifying and speaking up about viable options for improvements and exploring and creating a path for implementation. Required Qualifications and Education High School Diploma or equivalent. Must pass a drug test. Must speak, write, and read English. Must be a team player. Must have excellent attention to detail. Preferred Skills Prior Sterile Compounding and Pharmaceutical Industry experience. Prior experience operating manufacturing equipment/machinery. Knowledge of FDA guidelines, cGMP, and GDP. Willingness to participate in training and gain other certifications as needed. Knowledge of basic arithmetic and chemistry calculations. Ability to work in a fast-paced environment with dynamic priorities and demands. Excellent written and verbal communication skills. Desire to expand knowledge and grow with the company. Leadership ability.

Starting compensation: $25.00 per hour (plus a $1.50 shift differential) Shift Days: Sunday to Thursday Shift Hours: 2:30 PM to Close Shamrock anticipates closing the application window for this job opportunity on or before December 31, 2026 Lead Quality Control Technicians in maintaining all aspects of Quality Assurance to ensure proper, safe and exceptional operation of the department. Essential Duties: Audit products for quality and safety prior to sending them out to customers. Audit incoming raw materials for supplier specifications, quality, and food security. Review incoming ingredients for allergen checks and quality standards. Responsible for compliance with all regulations and food safety including allergen and pest control. Fill out necessary paperwork for product audits and HACCP documents. Review HACCP documents prior to handing paperwork to QA Supervisor/Manager. Work with operational teams on paperwork, quality checks, and HACCP procedures. Ensure adherence to all standard work processes, including the Production Sanitation processes. Aid in plant training requirements and conduct plant training sessions as needed. Work with QA leaders to ensure plant training requirements and frequencies are met. Recognize and escalate risks and/or improvement opportunities to improve plant performance. Other duties as assigned. Qualifications: High School Diploma or GED. 3+ year's meat and/or protein experience. HACCP certified, preferred. Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends, and holidays. Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to “treat associates like family and customers like friends.” Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education, wellness programs. Equal Opportunity Employer Shamrock Foods Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Join our dynamic Quality Assurance team at our Organic Dairy Processing facility in Platteville, CO. Be a part of a 2025 Top Workplace USA! Purpose: The Quality Assurance Lab Technician is responsible for in-process and finished product quality testing, maintaining accurate and complete records, and alerting management to any potential quality issues. S hift Nights 6pm - 6am Essential Responsibilities: All plant personnel have the responsibility to monitor and report any deviations from our Food Safety and Food Quality (HACCP & SQF) programs to your immediate supervisor. Assist in all in-bound and finished product milk processing including but not limited to: Customer Service, working with our Laboratory and Product Information Management System, Tanker/Silo Inventory Control, administrative assistant duties. Competency in Microsoft Windows and Office products. Responsible for performing process control testing in a manufacturing environment. Maintain accurate and complete laboratory testing result records. Maintain Good Manufacturing Practices, Good Laboratory Practices and Safety Procedures. Communicate any potential quality issues to QA Management. Professional communication and customer service skills in working with multiple departments and external partners. Other Required Responsibilities: Laboratory testing result data entry. Member of HACCP team. Other quality department responsibilities as deemed necessary. Knowledge & Experience: High School Diploma or equivalent. Bachelor's degree in Dairy Manufacturing, Food Science, Microbiology, or related field preferred. Experience in dairy laboratory testing procedures preferred. Knowledge of laboratory testing methods. Detail oriented and team member. Strong, honest work ethic with ability to handle multiple tasks daily. Good communication skills. Physical Requirements: Must be able to sit for extended periods of time; Must be able to stand or walk for more than 50% of the shift. Must be able to bend, stoop, kneel or crawl; reach grasp and lift, push, pull up to 50 lbs. regularly and up to 80 lbs. occasionally.

ABOUT THE COMPANY Our founders, food industry veterans Mike and Tisha, knew that food wasn't what it used to be, so they wanted to make it better - by creating a new kind of farm. A farm that grows up to 300 times more food than an ordinary farm on a smaller footprint, without a drop of pesticides. Farms powered with 100% renewable energy, growing with 95% less water and delivering food within 48 hours for longer freshness for our customers and less food waste. 80 Acres Farms is a vertical farming leader, operating commercial farms in Ohio, Kentucky, and soon-to-be Georgia in addition to research and development farms in Arkansas and The Hauge, Netherlands. All farms utilize state-of-the-art technology and analytics developed by the Company's subsidiary, Infinite Acres. 80 Acres Farms branded salads, microgreens, herbs, and tomatoes are available at retailers and food service distributors, including Kroger, Whole Foods, The Fresh Market, Dorothy Lane Markets, Sysco, and US Foods from Michigan to Florida. 80 Acres Farms is supported by world-class investors and partners, including General Atlantic, Siemens, Barclays, Ocado, Priva, and Signify/Philips. If you're interested in making a difference, join our team in changing how the world eats. POSITION OVERVIEW The Quality Technician is responsible for driving the 80 Acres Farms quality and food safety program across all processes at the farm. With strong knowledge of 80 Acres Farms Food Safety and Quality procedures the Quality Technician will perform process audits, product monitoring and verification checks, shelf-life evaluations and collection of food safety and quality data as applicable. The Quality Technician will be responsible for on-time identification and escalation of food safety and quality issues at the farm level, assist in food safety and quality training, support implementation of corrective actions, conduct and participate in root cause analysis and continuous improvement projects. This is a great entry level position that provides a foundation that supports growth in a Quality career path. Key responsibilities and duties: Monitor and verify compliance with food safety and quality programs and procedures on a day-to-day basis. Evaluate and document effectiveness of cleaning and sanitation of equipment prior to start-up. Verify general areas are maintained in sanitary conditions throughout operations shifts. Evaluate product adherence to specification at different stages in the process, including harvest, mixing, and packing. Collect environmental and product samples in compliance with schedule. Collect and evaluate shelf-life samples in compliance with schedule. Verify and calibrate food safety and quality metric monitoring devices such as metal detector, scales, and temperature recorders. Monitor and verify implementation of corrective actions at the farm level. Ensure farm compliance with food safety regulations. Support continuous improvement projects as needed. Qualifications: 1+ year experience with food handling or processing Familiarity of GMPs and HACCP Inquisitive and detail-oriented mind set Comfortability in computer systems and programs Degree or applicable experience in Agriculture, Food Science, Chemistry (Preferred) Schedule: Schedules are day shift; (4) 10-hour days. Saturday or Sunday availability ENVIRONMENT Repetitive motion throughout the shift Standing or walking for a long duration of time Crouching and kneeling Lifting up to 50lbs Will be exposed to 39-degree temperatures when working in the leafy packaging area BENEFITS WE OFFER YOU Health, dental, and vision insurance starting day one of employment Two weeks paid vacation One week paid health & wellness time 10 paid holidays Parental leave 401k with up to 4% Company match Annual tuition reimbursement Company-paid life insurance Short and long-term disability insurance ABOUT OUR HIRING PRACTICES Statistics show that underrepresented communities don't apply for a job unless they meet 100% of the qualifications. Don't worry if you think you can't check every box on the list; we'll provide all the on-the-job training you need. 80 Acres Farms is an equal opportunity employer. You're defined by more than just your job title, and we want you to feel comfortable bringing your true self to work. We value your talents, your traditions, your take on the world, and everything else that makes you unique. We strive to be to be a place where a diverse mix of talented people want to come, to stay, and to do their best work. 80 Acres Farms participates in E-Verify. As required by law, your employment with the Company is contingent upon you providing legal proof of your identity and authorization to work in the United States. Employment decisions are made without regard to protected characteristics. All candidates will be given the same consideration.

Duties and Responsibilities: Work effectively with the Quality, Operations, and R&D departments to perform all work accurately, with a sense of urgency and a positive attitude. Activities include the following: In-Process and Final Device Inspection and Test : Support Manufacturing as the QC inspector for clean-room & packaging inspection activities. Perform and document in-process and final inspection/test of devices and sub-assemblies. Provide inspection/test assistance to R&D, Operations and Quality Engineering in support of design and process verification/validation activities. Receiving Inspection and Test : Perform and document receiving inspection/test of device components & raw materials in accordance with drawings/specifications. Maintain accurate & timely records of inspection activities and recording such activities in the QC Receiving Log. Non-Conforming Materials : Identify, segregate and quarantine non-conforming materials resulting from inspection activities. Initiate NCRs and notify the workstream owner in a timely manner. Execute and record disposition activities in accordance with approved NCRs. Microbiological Monitoring : Participates in periodic microbiological and particulate testing of the cleanroom and products as required. Returned Goods Authorization : Perform timely inspections and maintain accurate records of all returned TriSalus products through the RGA process. Correctly dispositions returned product as defined in approved procedures. Quality Record maintenance : Receive, verify, scan and physically file Quality Records in an organized manner as needed. Shipping QC : Verify TriSalus products and associated paperwork are accurate and complete prior to shipment. Audit Assistance : Help retrieve, review, organize and re-file documentation during all TriSalus site audit activities (internal, FDA, ISO registrar). GP Dynamics : Transfer released materials in the ERP software for material management as needed. Training Record support : Enter complete training/certification records into the eQMS as needed. General : Perform other quality inspection, test or administration activities as assigned. Qualifications Education & Certifications: High School diploma. Advanced education or certifications a plus. Work Experience: 2+ years of Quality Control / Inspection experience in a medical device or similar technical product manufacturing company. Experience working with sterile disposable products in a cleanroom environment a plus. Knowledge, Skills & Abilities: Able to read and interpret engineering drawings, specifications and detailed technical documents. Able to read and follow quality procedures and detailed work instructions (QLPs/OPs). Able to perform component and product inspection/testing using tools such as microscopes, calipers, micrometers, pin gauges, depth gauges, pull force test systems and vision measuring systems. (Sufficient knowledge to select and use the correct measurement tool for the required inspection accuracy. Able to accurately document results of inspections using good documentation practices. Able to understand and apply inspection sampling plans, such as C=0 or ANSI Z1.4. Able to utilize basic math skills. Able to use MS Word and MS Excel. Must possess strong attention to detail. Possess good communication skills and able to interact with peers in a professional manner. Possess knowledge and application of US and international standards for quality management (FDA 21 CFR 820, ISO 13485). Demonstrates excellent critical thinking skills. Ability to adapt to and rapidly learn new processes. Strong verbal and written communication skills and confidence in making inspection related decisions. Participates as a member of cross functional technical teams to support process improvements, special projects and investigations as needed. Approaches work tasks with a positive attitude and seeks feedback on performance to continually improve. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Must be able to lift and carry up to 30 lbs. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards.

The Quality Technician II is responsible for maintaining the Quality Management System by following the required procedures and ensuring customer requirements are identified and met. Essential Duties & Responsibilities Reads part drawings and assesses dimensions. Supports inspection equipment operation within the production cell as required, including Coordinate Measurement Machine. Initiates Management Review Board and performs actions as assigned. Performs Final Inspection - Ensures required documentation from all inspections are complete and all functions of the manufacturing process have been verified as complete. Ensures correct product identification and traceability of materials is maintained throughout the operations process. Initiates Quality-related turnbacks and communicates with production. Creates basic and intermediate certifications as required by the Work Order, including FAIRs. Performs specialised inspection, including visual and dimensional checks. Assists with Internal Auditing as required. Assists with measurement tool calibration as required. Creates basic CMM programs in the production cell to aid in inspection. Participates in small projects or other tasks as required. Education and Experience This position requires a High School Diploma or GED equivalent. This position should have 2-3 years of experience in a quality role in a manufacturing environment. Experience with QMS compliance software (e.g., Qualtrax) and enterprise resource planning system (e.g., JD Edwards or SAP) is required. Knowledge, Skills, and Abilities Must have the ability to multitask in a fast-paced environment. Excellent interpersonal skills and ability to effectively communicate with all levels of the organization both written and verbal in English. Ability to work in a team environment. Must have a high level of attention to detail and excellent problem-solving skills. Must be proficient with Microsoft Office, specifically Excel and Outlook, and general computer skills. High knowledge of materials and material requirements as they relate to customer orders. High knowledge of purchase order requirements. Ability to read blueprints and product drawings and interpret requirements as needed. Must be able to operate various inspection tools such as dial calipers, micrometers, optical comparator, height gages, pin & plug gages, pi tape and microscopes. Must have excellent math aptitude. Work Environment/Physical Demands/Equipment Used This position is located in a manufacturing facility which requires prolonged sitting, standing, walking, squatting, twisting, and bending. This position will spend about 90% of their time on the production floor where heavy machinery is present and loud sounds exist. Requires manual dexterity for typing and considerable time at a computer. Health and Safety - PPE Requirements Safety Glasses to be worn at all times when on the production floor Safety Shoes to be worn at all times when on the production floor Must wear appropriate PPE for all work activities performed; varies based work

Job DescriptionDescription: ROLE AND RESPONSIBILITIES • Inspect mechanical parts fabricated internally using industry standard inspection tools • Inspect mechanical parts and components provided externally by suppliers at inspection stations. • Inspect and monitor incoming raw materials/packaging and finished goods, including paint, for specification compliance • Inspect electrical wire routing, torquing and continuity as required • Conduct electrical testing of product as required • Assist in troubleshooting non-compliant inspected parts and components • Responsible for inspection related document control and records storage • Document and record inspection results in electronic and hardcopy format • Interpret mechanical drawing dimensional features and acceptable tolerances • Maintain a “floor presence” as an “auditor of quality” throughout the manufacturing facility and process • Regularly review work instructions, travelers, and production records for continuous compliance to manufacturing requirements • Works closely with production managers and manufacturing personnel conducting quality assurance checks • Participates in regular procedure training activities in production • Provides support for quality related projects, objectives and deadlines beyond the normal job scope as required • Makes key decisions concerning product quality on their own, including pausing the line when processes do not conform to specification • Facilitates GEMBA Walks, Quality Stand-up meetings, and other public speaking activities as needed • Compiles and distributes weekly quality metrics data at the direction of the Dir of Quality QUALIFICATIONS AND EDUCATION REQUIREMENTS • A minimum of 3 years' experience as a Quality Inspector in an ISO 9001 environment is required for this position • A minimum of 3 years' electrical/electronic manufacturing experience is required • ASQ CQT certification or current pursuit of certification is highly desired • A 2-year technical or vocational certificate is highly desired • Advanced working knowledge of ISO 9001:2015 is highly desired • Knowledge of AQL acceptance sampling plans using ANSI Z1.4 is strongly desired • Knowledge of 5S +1 principles highly desired PREFERRED SKILLS • Advanced hands-on experience using common inspection tools and instruments • Highly proficiency in MS Office Suite (e.g., Excel) • Highschool math skills required • Experience inspecting SS and CRS weld joints is highly desirable • Ability to manage multiple concurrent tasks is required • Deliver results accurately and on time while utilizing a strong learning mindset • Must be capable of working independently to achieve production schedules and quality goals • Effective interpersonal skills involving the ability to work effectively, cross-functionally and cross-culturally • Excellent communication skills adaptable to all levels of the organization • Ability to communicate clearly in a proactive positive sense BENEFITS • 401(k) • 401(k) matching • Dental insurance • Health insurance • Life insurance • Paid time off • Vision insurance PERFORMANCE BONUS - Eligible A written and / or practical skills assessment will be required of the successful applicant. Requirements: