Quality control technician jobs in Goodyear, AZ - 506 jobs

We are seeking an *Engineering Technician - Integration & Test* to support mechanical and electromechanical assembly, testing, troubleshooting, and integration activities for spacecraft and related support equipment. This role involves hands-on work in a controlled environment and supports a variety of engineering teams throughout the build and test lifecycle. *Key Responsibilities* *Assembly & Fabrication* * Perform mechanical assembly, wire harnessing, and soldering. * Apply epoxy bonding and polymeric materials for spaceflight hardware. * Use precision torque tools for fastener installation. * Maintain workspaces in compliance with ESD, FOD, and 5S standards. * Perform calibration and preventative maintenance on electronic equipment. * Support discrepancy identification, documentation, and resolution. * Utilize software systems such as Solumina MES, TipQA, Windchill, and CREO View. *Integration & Test Support* * Lead test configuration setups and equipment staging. * Set up, troubleshoot, and repair Electronic Ground Support Equipment (EGSE), including test racks and desktop systems. * Assist with cable design and test configuration development. * Navigate and execute automated test scripts in Maestro and AstroRT environments. * Verify completion and documentation of test events. * Support hazardous or critical operations as required. *Basic Qualifications* * High School diploma or technical training equivalent, plus 2-4 years of related experience (Mechanical or Manufacturing Technician experience preferred). * Proficiency in Microsoft Excel, Word, PowerPoint, and Visio. * Hands-on experience with aerospace hardware, harness builds, and soldering. * Understanding of electrical measurements, AC/DC principles, and troubleshooting. * Knowledge of clean room operations and spacecraft handling. * Ability to lift up to 50 lbs. * Ability to perform repetitive tasks such as sanding or scrubbing for extended periods. * Ability to work all shifts, weekends, and overtime as needed. * Must be able to wear and perform work in an N95 or higher-rated respirator. *Preferred Qualifications* * Experience with test equipment such as oscilloscopes, network analyzers, waveform generators, synthesizers, digitizers, and signal analyzers. * Familiarity with RF/microwave components (filters, couplers, splitters, amplifiers). * Experience with cryogenic systems such as dilution refrigeration, 4K cryocoolers, ADR systems, or liquid helium immersion setups. *Job Type & Location*This is a Contract position based out of Gilbert, AZ. *Pay and Benefits*The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Gilbert,AZ. *Application Deadline*This position is anticipated to close on Jan 28, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

The Role Amphenol Aerospace Operations is seeking a Quality Technician to work out of its state-of-the-art facility in Mesa, AZ. The successful candidate will support quality functions including, but not limited to, return material and rejection investigation and disposition, customer support, customer quality documentation, and monitoring of quality location inventories. The key responsibilities of the Quality Technician include, but are not limited to: Technical support of customer quality issues/escapes in relation to return material authorizations (RMA's) Product review and assist Quality Engineers with disposition, containment, and work orders Ability to communicate with customers via phone and email Support of corrective action responses based on customer escape issues and data Maintain a working knowledge of product workmanship standards and the quality procedures manual Determine rework and process work orders Review of rejection trends Location - Mesa, AZ 25 minutes from Phoenix, AZ The Person - The key skills and qualities of a Quality Technician at Amphenol Aerospace Operations: High school diploma and at least five years of applicable experience or an associate degree in a technical curriculum and one year of experience in manufacturing or manufacturing support is required Equivalent education and experience are acceptable Ability to read and understand technical drawings, specs, and documents Has proactive problem-solving skills Familiarity with quote and order processing a plus Physical demands of the role include bending, sitting, typing, lifting, and standing (up to 5 hours per day) Proficiency in Microsoft Excel, PowerPoint, Word, and Data3 software Incumbent must pass an annual eye exam, with or without corrective lenses The Company - With manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol - Making History, Designing the Future

Energy: Forget about blending in. That's not our style. We're the risk-takers, the trailblazers, the game-changers. We're not perfect, and we don't pretend to be. We're raw, unfiltered, and a bit unconventional. But our drive is unrivaled, just like our athletes. The power is in your hands to define what success looks like and where you want to take your career. It's not just about what we do, but about who we become along the way. We are much more than a brand here. We are a way of life, a mindset. Join us. A day in the life: In the rocking role of a QA Technician at Monster Energy, you'll be the guardian of quality, ensuring our legendary drinks deliver the ultimate energy rush! You'll dive into performing standardized tests that keep our work-in-process and finished products at the peak of perfection, all while making sure they meet the sky-high standards of Monster and our awesome customers. Get ready to unleash your skills and be part of the energy that fuels our world! The impact you'll make: Conduct organoleptic and analytical tests at various stages of compounding and packaging to ensure compliance with standards. May include the use of pH meters, Refractometer (Brix), Cbox (CO2,dO2), Conductivity Meter, Analytical Scale, FTIR, Soleris (Micro) HPLC, Malvern Mastersizer,Hygiena ATP Swab and other instrumentation. Submit samples for microbiological testing, maintains test results, and calculates batch adjustments for certain products. Approve batches for packaging and conforming finished product for shipment and places non-conforming product on hold for further analysis. Calibrate, clean, and maintain laboratory equipment and instrumentation. Prepare reagents and solutions for use in testing. Observes conditions and practices in compounding, packaging, and finished goods storage areas, making recommendations for improvements. File and maintain retained samples. Make corresponding inventory movements in SAP. Conduct in line audits/product assessments for specification compliance on beverage products. Coordinate with production and regulatory on quality issues and document corrective action. Ensure Good Manufacturing Practices (GMPs) are being followed. Who you are: Prefer a Bachelor's Degree in the field of -- Quality Assurance, Engineering, or related field of study. Additional Experience Desired: Between 1-3 years of experience in laboratory testing in a manufacturing environment. Additional Experience Desired: Between 1-3 years of experience in quality control in a manufacturing environment. Computer Skills Desired: Proficiency with standard office software (such as MS Office Suite: Excel, Word, Outlook). Preferred Certifications: N/A Additional Knowledge or Skills to be Successful in this role: Knowledge of Good Manufacturing Practices (GMPs) and Food. Safety Fundamentals. Monster Energy provides a competitive total compensation package. This position has an annual estimated salary of $18.00 - $25.00 /hr. The actual pay may vary depending on your skills, qualifications, experience, and work location.

Requirements KNOWLEDGE & SKILL REQUIREMENTS Ability to drive up to a 24' Box Truck. Since position requires driving a company vehicle, you must be in possession of a valid driver's license. A clean driving record over the past five (5) years is required. Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent. Must be able to lift 50lbs. Ability to effectively troubleshoot and assist others in troubleshooting Audio Visual equipment. Must be able to be stand for a majority of the shift. 1-3 years of experience working in a warehouse environment; working with audio, video, lighting, and screen systems. This position requires willingness to work a flexible schedule. Availability required Monday-Sunday, days and nights and holidays. KEY COMPETENCIES Critical thinking and problem solving skills Planning and organizing Decision-making Communication skills Resourcefulness Teamwork Adaptability Stress tolerance Sense of urgency AVmedia Inc. is an Equal Opportunity Employer.

Job Title: Quality Technician Position Type: Full-Time | 9/80 Schedule Week 1 - Monday-Friday 6am-2pm Week 2 - Monday-Thursday 6am-4pm Pay - $19.00 - $25.00 Join Our Team at Qualastat - Experts in Wire Harness Manufacturing Qualastat is seeking a detail-oriented and motivated Quality Technician to support our quality assurance efforts in wire harness manufacturing. This is a great opportunity to be part of a dedicated team focused on delivering high-quality products to aerospace and industrial customers. Key Responsibilities: Perform inspections of incoming materials, in-process production, and finished wire harness assemblies Utilize measuring tools and inspection equipment to verify product conformity Maintain and review quality documentation, including inspection reports, non-conformance reports, and corrective actions Assist in root cause analysis and implementation of corrective/preventive actions Support internal audits and continuous improvement initiatives Calibrate and maintain inspection tools and equipment Manage and track limited shelf-life materials to ensure proper usage and compliance Ensure adherence to customer and industry standards, with knowledge of AS9100 and ISO 9001 Qualifications: Knowledge of AS9100 and ISO 9001 quality standards required Familiarity with J-STD-001 and IPC/WHMA-A-620 standards a plus IPC certification is a plus Strong attention to detail and excellent organizational skills Ability to read and interpret technical drawings and specifications Proficiency in Microsoft Word and Excel Prior experience in electronics or wire harness manufacturing is preferred Strong communication and time management skills Must be able to pass a background check Fluent in English (read, speak, and write) Benefits: Medical, Dental, and Vision Insurance 401(k) with Company Match Supplemental Insurance Options Paid Holidays Generous PTO Policy Sick Time

Job DescriptionDescription: SeaCa Plastic Packaging, LLC located in Surprise, AZ is an innovative plastic packaging product company under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Seattle-Tacoma Box Company has been under the same family management for 6 generations spanning nearly 135 years. Currently, Seattle-Tacoma Box Company and subsidiaries support assembly and production operations and warehouses in Washington, Alaska, Oregon, California and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. The SeaCa Plastic Packaging, LLC Quality Control Department is currently looking to add a Quality Control Technician to our team. The Quality Control Technician will provide support to the company by ensuring compliant product production. Responsible to follow plant safety protocols and to exercise good judgement in all operations. Follow a Standard Operating Procedure to perform a series of tests that monitor and record quality. Report quality performance in the reporting system provided. This is a position in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Work schedule is Weds/Thurs-Sat from 7pm to 7am. Shifts are 3 on 4 off, alternating with 4 on 3 off. Schedule is: D) Weds/Thurs-Sat 7pm - 7am Due to the nature of our operation, flexibility is required, and employees may be asked to adjust schedules, work overtime, or cover other shifts when needed. Requirements: Duties/Responsibilities: Perform hourly inspections of hollow form sheets Using metric and/or standard measuring devices, such us, calipers, micrometers, scale, impact, visual etc. to detect and confirm quality standards achieved Inspecting product using digital inspection camera and software associated with this Recognize changes in the product using inspection data Communicate in a professional manner with the crew of quality concerns, and quarantine out of spec products Document all quality inspections manually and/or electronically Perform calculations to verify totals, average, etc. Inspect raw materials, finished products, returned products, and other samples, using ash test, melt flow rate, impact, tensile, etc. Asist production in the startup and shutdown when needed Maintain a clean quality lab and manufacturing area at all times Assist in receiving and tagging raw materials Assist training new crew members and other departments as needed on quality standards and how to perform quality inspections Required Skills/Abilities: Attention to detail is very critical Recognizing changes using measurement data and visual inspections Able to work in high paced environment Ability to prioritize tasks Basic computer skill required, Windows, Word, Excel preferred Adaptability to changes in work environment such us, material, crew, etc. Problem solving and creativity Education and Experience: Two or more years of experience in quality inspection, in industrial environment 2 - 5 years of manufacturing experience in packing industry preferred Physical Requirements: Ability to see and distinguish color, including using glass Adapt to potential work schedule changes that come with working in a plant with a 24-hour/7-day a week operations Ability to push, pull, and lift 50 lbs. Ability to work in both a high and low temperature environment Ability to stand for extended periods of time Reports To: Quality Control Manager Supervisory Responsibilities: None

Description ***APPLICANT MUST BE BILINGUAL ENGLISH & SPANISH***Approve incoming product by confirming specifications, conducting a visual an measurement test, and rejecting and returning unacceptable materials.Approve in-process production by confirming required specifications, conducting visual and measurement test, and communicating the required adjustments to the production supervisor.Approve all finished products by confirming specifications and conducting required test.Return products for re-work if needed and complete documentation to confirm re-work.Document and update inspection results by completing reports and logs.Keep measurement equipment operating by following operating instructions and calling for repairs.Maintain safe work environment by following standards and procedures and complying with company regulations.Update job knowledge by participating in educational opportunities, reading technical publications, attending seminars, watching industry videos, ect.Accomplish organization mission by completing related results as needed. Type: Full-time Pay: $17.00 to $19.00 per HOUR

JX Advanced Metals USA, Inc. is hiring a skilled QC Technicianto join our growing team in Chandler/Mesa, Arizona. In this role, you'll perform high-precision inspections using CMMs (MCOSMOS) and other metrology tools to ensure quality across our semiconductor component production lines. This is a great opportunity for someone who thrives on detail, works well in a team environment, and wants to grow with a respected manufacturer. Key Responsibilities * Program, set up, and operate CMMs (preferably using MCOSMOS software). * Inspect raw materials, in-process parts, and finished products using CMM and manual tools (micrometers, calipers, height gauges, comparators, etc.). * Interpret technical drawings and specifications accurately. * Conduct and approve First Article Inspections (FAIs). * Document and report nonconformances, and support corrective action processes. * Perform incoming, in-process, and final inspections for quality compliance. * Use specialized inspection techniques (ultrasonic, fluorescent, optical comparators) as needed. * Support cleanroom inspections with proper PPE. * Maintain organized and safe work areas aligned with quality protocols. Qualifications * 5+ years of quality inspection experience in a manufacturing environment. * 5+ years of CMM experience, preferably with MCOSMOS. * Strong skills in interpreting engineering/technical drawings. * Proficiency in both manual and automated inspection techniques. * Detail-oriented, organized, and comfortable documenting results accurately. * Able to work cross-functionally and communicate inspection findings. * Capable of working in a cleanroom environment and lifting up to 50 lbs. * High school diploma or GED required; technical training/certifications preferred. Why Work With Us * Join a growing manufacturer serving the semiconductor industry. * Work with advanced technology and precision tools. * Be part of a supportive team that values quality, innovation, and continuous improvement. * Opportunity for growth as we expand our Mesa operations. Equal Opportunity Employer JX Advanced Metals USA, Inc. is an Equal Opportunity Employer. We welcome applicants of all backgrounds and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. Background & Drug Screen Disclaimer At JX Advanced Metals USA, we conduct background checks and drug screenings for all potential employees to ensure a safe and productive work environment. Background Checks: * We verify employment history, education, and criminal records. * Information is used only for employment purposes and kept confidential. Drug Screenings: * Pre-employment tests for substances, including THC products. * Positive results may lead to the job offer being withdrawn. By applying, you agree to these checks and screenings to help us maintain a secure workplace.

JX Advanced Metals USA, Inc. is hiring a skilled QC Technicianto join our growing team in Chandler/Mesa, Arizona. In this role, you'll perform high-precision inspections using CMMs (MCOSMOS) and other metrology tools to ensure quality across our semiconductor component production lines. This is a great opportunity for someone who thrives on detail, works well in a team environment, and wants to grow with a respected manufacturer. Key Responsibilities Program, set up, and operate CMMs (preferably using MCOSMOS software). Inspect raw materials, in-process parts, and finished products using CMM and manual tools (micrometers, calipers, height gauges, comparators, etc.). Interpret technical drawings and specifications accurately. Conduct and approve First Article Inspections (FAIs). Document and report nonconformances, and support corrective action processes. Perform incoming, in-process, and final inspections for quality compliance. Use specialized inspection techniques (ultrasonic, fluorescent, optical comparators) as needed. Support cleanroom inspections with proper PPE. Maintain organized and safe work areas aligned with quality protocols. Qualifications 5+ years of quality inspection experience in a manufacturing environment. 5+ years of CMM experience, preferably with MCOSMOS. Strong skills in interpreting engineering/technical drawings. Proficiency in both manual and automated inspection techniques. Detail-oriented, organized, and comfortable documenting results accurately. Able to work cross-functionally and communicate inspection findings. Capable of working in a cleanroom environment and lifting up to 50 lbs. High school diploma or GED required; technical training/certifications preferred. Why Work With Us Join a growing manufacturer serving the semiconductor industry. Work with advanced technology and precision tools. Be part of a supportive team that values quality, innovation, and continuous improvement. Opportunity for growth as we expand our Mesa operations. Equal Opportunity Employer JX Advanced Metals USA, Inc. is an Equal Opportunity Employer. We welcome applicants of all backgrounds and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. Background & Drug Screen Disclaimer At JX Advanced Metals USA, we conduct background checks and drug screenings for all potential employees to ensure a safe and productive work environment. Background Checks: We verify employment history, education, and criminal records. Information is used only for employment purposes and kept confidential. Drug Screenings: Pre-employment tests for substances, including THC products. Positive results may lead to the job offer being withdrawn. By applying, you agree to these checks and screenings to help us maintain a secure workplace.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ensure all products conform to the customer specifications as outlined in SAP system. Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. Perform analytical tests required to qualify ingredient batches for production. Perform production line checks at specified intervals. Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. Maintain laboratory cleanliness at all times. Report all out of specification results to designated leadership. Complete special projects and other reasonable duties as assigned by leadership. Required Skills: Working knowledge of Excel, Word, and SAP preferred. Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. Organized and detail oriented, adaptable to change. High level of precision and accuracy in inspection and testing processes. Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations Understanding of Food Safety Requirements. Able to read and understand metric system. Food or beverage laboratory experience preferred. Competencies: Technical: Skilled in maintaining accurate and detailed records of inspections and tests Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. Adaptability: Flexibility to adapt to changing production environments and requirements. Communication: Clear and concise communication with production staff and management Education and Experience: Highschool diploma or equivalent. 1 - 3 years of experience in Quality within a manufacturing environment preferred. In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco Beverages US Inc. offers the following competitive pay and comprehensive benefits: Pay Range: $19.53 - $26.85 an hour Shift: 9:00pm-5:30am (3rd shift) with flexibility during weekends as needed Status: Non-Exempt Medical/dental/vision insurance  Life insurance  401(k) savings plan with company match Paid holidays and vacation  Well-being benefits Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages, Inc. Refresco Beverages, Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages, Inc., and have been engaged in a search shall submit résumé to the designated Refresco recruiter or, upon authorization, submit résumé to this career site to be eligible for placement fees. Refresco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national orientation, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: * Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). * Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). * Ensure all products conform to the customer specifications as outlined in SAP system. * Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. * Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. * Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. * Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. * Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. * Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. * Perform analytical tests required to qualify ingredient batches for production. * Perform production line checks at specified intervals. * Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. * Maintain laboratory cleanliness at all times. * Report all out of specification results to designated leadership. * Complete special projects and other reasonable duties as assigned by leadership. Required Skills: * Working knowledge of Excel, Word, and SAP preferred. * Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. * Organized and detail oriented, adaptable to change. * High level of precision and accuracy in inspection and testing processes. * Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations * Understanding of Food Safety Requirements. * Able to read and understand metric system. * Food or beverage laboratory experience preferred. Competencies: * Technical: Skilled in maintaining accurate and detailed records of inspections and tests * Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. * Adaptability: Flexibility to adapt to changing production environments and requirements. * Communication: Clear and concise communication with production staff and management Education and Experience: * Highschool diploma or equivalent. * 1 - 3 years of experience in Quality within a manufacturing environment preferred. * In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: * Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. * Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: * 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X * Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. * Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco Beverages US Inc. offers the following competitive pay and comprehensive benefits: Pay Range: $19.53 - $26.85 an hour Shift: 9:00pm-5:30am (3rd shift) with flexibility during weekends as needed Status: Non-Exempt * Medical/dental/vision insurance * Life insurance * 401(k) savings plan with company match * Paid holidays and vacation * Well-being benefits * Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages, Inc. Refresco Beverages, Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages, Inc., and have been engaged in a search shall submit résumé to the designated Refresco recruiter or, upon authorization, submit résumé to this career site to be eligible for placement fees. Refresco is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national orientation, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

Location: 10834 North 32nd Street, PHOENIX, AZ, 85028 At Molly Maid of East Phoenix and Paradise Valley, our employees enjoy the best of both worlds. As a small, locally owned business, we take pride in creating a supportive and engaging workplace where our team members are truly valued. Our hands-on owners are actively involved and committed to each employee's success and well-being. At the same time, being part of a respected national franchise gives us access to cutting-edge technology, training, and resources that make your work easier and more rewarding. This combination allows our team to be more efficient, earn more, and grow with a company that's always investing in its people. Plus, with the strength of national and local marketing behind us, we continue to attract new customers-creating even more opportunities for our employees to succeed. Basic :We're looking for a motivated and dependable individual who is eager to grow with our company and enjoys taking on new challenges! This position plays a key role in supporting both our field and office operations. Responsibilities include working alongside our house cleaning teams to perform quality control inspections, assisting with training and development, and supporting the Operations Manager with customer service, sales, and administrative tasks. The ideal candidate is adaptable, proactive, and ready to step in wherever needed to help our team succeed. Qualifications and Requirements To be successful in this role, candidates should meet the following qualifications:Previous experience in residential cleaning management or a related field is preferred. Valid Arizona driver's license with a clean driving record. Legal eligibility to work in the United States. Bilingual in English and Spanish is a requirement for this position. Must be able to pass a comprehensive background check. Availability to work Monday through Friday between 7:00 a. m. and 5:00 p. m. , with some flexibility as schedules may vary. Proficiency with computers and basic typing skills; experience with scheduling or field management software. Strong organizational, communication, and interpersonal skills with the ability to work effectively as part of a team and independently. Benefits and Compensation: At Molly Maid of East Phoenix and Paradise Valley, we believe in rewarding hard work and providing a supportive environment where our team members can thrive. We offer:Competitive starting pay of $35,360 annually during training, with the opportunity to earn significantly more upon completion. Revenue sharing and multiple incentive programs designed to increase earnings based on performance and team success. An enjoyable, team-oriented work environment led by professional management that truly cares about your well-being and success. 401(k) retirement plan with employer matching to help you plan for your future. Paid time off and paid holidays to ensure a healthy work-life balance. Company vehicle provided while working in the field. Opportunities for career growth and advancement within our organization. Family-friendly, Monday-Friday schedule, with typical work hours between 7:00 a. m. and 5:00 p. m. Key Responsibilities The Quality Control, Training & Operations Support Team Member plays a vital role in maintaining the high standards and smooth daily operations of Molly Maid of East Phoenix and Paradise Valley. Primary responsibilities include:Conducting quality inspections to ensure all cleanings meet company standards and customer expectations. Assisting with the training and development of new and existing house cleaning staff to promote consistency and excellence. Performing in-home estimates for recurring cleaning services while effectively communicating the value and benefits of the Molly Maid brand. Handling customer communications, including answering calls and online inquiries, assessing customer needs, and recommending appropriate services. Managing customer concerns and complaints with professionalism, ensuring timely resolution and follow-up. Opening the office and dispatching cleaning teams each morning to ensure an organized and efficient start to the day. Creating and adjusting daily route schedules for cleaning teams to maximize productivity and service coverage. Processing customer payments and invoices accurately and promptly. Maintaining organized documentation of customer and employee communications, service records, and other operational information. Monitoring and replenishing office and cleaning supply inventory as needed. Providing field support to cleaning teams to ensure successful completion of daily assignments. Performing additional duties as needed to support the overall success of the team and business. If that's you, APPLY TODAY!If you meet the requirements for this position, we will schedule you for an interview immediately. "You are applying to work for a franchise owner of Molly Maid, not Molly Maid SPV LLC or any of its affiliates. If hired, the franchise owner will be your only employer. Franchise owners are independent business owners who are solely responsible for their own wage and benefit programs that can vary among franchise owners. This job description is meant to describe the general nature and level of work being performed. "

Join our amazing team and contribute as a: Quality Technician - Level 1 ABOUT THE ROLE This position is an experienced QC tech of Aggregate materials with an opportunity for growth within the company. An individual will perform laboratory and field inspections of material production and quality control tests in accordance with established local or state standards for both production and shipping. WHAT YOU'LL ACCOMPLISH * Observe and demonstrate a commitment to adhere to all Amrize Safety Standards, Advisories, and Policies. * Perform ongoing product sampling and testing of aggregate to ensure that material produced and shipped will meet state, project, or customer specifications and expectations. * Perform timely repair, and calibration of laboratory testing equipment, as needed. * Performs regular updates to appropriate Quality Control and testing databases and spreadsheets. * Perform testing and assist with any of the company's new aggregate product designs. * Provide troubleshooting guidance and advice for plant quality. * Assist Plant Manager as required. * Work directly with the QC team and Management to complete testing in a timely manner. * Travel to and from jobsites assisting and coordinating the transfer of samples from the field and or multiple mine sites to the laboratory * Obtaining the proper certifications to comply with the requirements of local and state entities. WHAT WE'RE LOOKING FOR * Work Experience: Aggregate-Construction Materials QC testing * High school diploma is a minimum requirement. * Current ATTI Lab Soils/Aggregate Technician Certification or the ability to obtain certifications at a minimum * Availability and willingness to work flexible hours including nights, weekends, and 12 hr. shifts to meet the company's and customer needs. * Microsoft Office software user abilities * This position requires an essential function:Reliability and Integrity; Ability to lift and carry 25 lbs, at times over uneven ground. Additional Requirements: * Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER * Competitive salary * Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings * Medical, Dental, Disability and Life Insurance * Holistic Health & Well-being programs * Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care * Vision and other Voluntary benefits and discounts * Paid time off & paid holidays * Paid Parental Leave (maternity & paternity) * Educational Assistance Program * Dress for your day Did we spark your interest? Build your future with us and apply! HR Contact: Katherine Therese HENNESSY BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

Available! RESPONSIBILITY: Inspection Of Plastic Parts As Specified On Production Document. Verify Correct Part To Print Revision And Correct Material Used. Label Creation. Audit Paperwork For Quality Criteria From Production Floor When Job Is Complete. Receiving Inspection Do Layouts As Required. Filing And Other Duties As Assigned. Understand Company Quality Policy And General Safety Rules For All Employees Education / Experience Quality Technician/Inspector experience (Required) Thorough Knowledge Of Blue Print Reading Basic Knowledge Of Process Control And Capability Good Mathematical Skills Pay:$18.89 Shift: 3rd Sunday-Thursday Hours: 10:30pm-7am Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. Fun Safety and attendance incentives. You NEVER pay a fee! Weekly pay. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website. Please select the Maryville branch or call our office at ************* Stop in and see our experienced friendly staff at 15570 W Van Buren St, Goodyear, AZ 85338 Advance Services is an equal opportunity employer. #450

As a Quality Technician at NMG Aerospace you will be responsible to perform inspection / testing and statistical analysis on aerospace products to support continuous improvement. Shift is 6:00am - 2:30 pm Monday - Friday Perform inspection / testing and statistical analysis on aerospace products to support continuous improvement. Essential Job Functions: * Perform inspections or tests as directed using inspection / measuring equipment and recording results. * Perform statistical analysis as required/requested. * Perform capability studies. * Manage the Statistical Process Control (SPC) program. * Perform Failure Mode and Effects Analysis (FMEA) and develop Control plans. * Perform Gauge Repeatability and Reproducibility (R&R) studies. * Perform First Article Inspections and complete AS9102. * Prepare Production Part Approval Process (PPAP) packages as instructed. * Perform corrective actions. * Prepare quality documentation and reports by collecting, analyzing, and summarizing information, and trends. * Be able to set up and operate CMM using established programs. * Be able to set up and operate Surfcom contour tracer for detailed dimensions. * Work closely with Quality Engineer for daily needs. Additional Duties: * Provide support for Lean manufacturing and continuous improvement initiatives, companywide. * Other duties, reporting, special assignments, or projects as needed and assigned. * Must remain current with, and complete all required training as assigned. * Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements. Qualifications: * 3 years of Inspection and/or Quality Assurance experience in Aerospace, Automotive or other Technical industries. * Demonstrated competency with metrology equipment. * Competent in reading/interpreting engineering drawings (GD&T). * Advanced Computer Skills: Microsoft (Excel, Word, Outlook, and Power-point), Statistical software (Minitab / SPCpack / Stat-Graphics), digital imaging, Adobe Acrobat. * Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company. * Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results. * Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies. * May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual. Education: * High School Diploma or equivalent In addition to competitive wages, NMG is proud to offer a retirement saving plan with company matching opportunity, excellent health and wellness benefits including a $350 annual wellness allowance for assistance with personal health and fitness goals, can earn up to 4 weeks paid time off, on the job training, education assistance and a variety of other supportive programs to meet our team's member's needs. Come join our NMG family and be part of a team of individuals who enjoy working and learning together as a team. Apply Today!

Job Description Wasserstrom, an industry fixture since 1902, is a national leader in the manufacturing of food service equipment. From design to installation, we are a global supplier, custom manufacturer and consolidator of fixtures, furniture, and equipment. Rooted in the food service industry, we provide flexible solutions to targeted markets where you eat, sleep, work, play, shop and gather. We succeed by leveraging our national presence, buying power, regional consolidation, logistics operations, creative experts, and innovative engineering capabilities. We strive to extend our legacy of creating lasting value for our customers, associates, and the communities we serve. Job Summary: This position is responsible for ensuring all finished products are completed according to quality standards and customer specifications. Quality Controllers work closely with engineering to ensure products are completed with all buy-out items and components. Quality Controllers must have strong communication skills to communicate product issues to manufacturing and engineering in a timely manner. Quality Controllers are required to document correction requests, maintain daily product logs, and mark products with ETL (Electrical Testing Laboratories) labels. Quality Controllers are assigned to the manufacturing plant but may also work with other departments, such as engineering, purchasing, and account services. Quality Controllers may perform other tasks as needed. Essential Duties and Responsibilities Inspect finished products for defects Complete standard testing and evaluation processes Approve finished products for shipment Document correction requests and maintain daily product logs Communicate product issues in a timely manner Work with build documents and basic drawings Experience and Education: High School or GED 6 - 12 months related experience and/or training Position Requirements: Knowledge of proper quality control procedures Mechanically inclined; ability to work with shop machinery and basic hand tools Ability to read a tape measure accurately to 1/16th of an inch Ability to add and subtract fractions Communicates well with others; asks for and offers help when needed Detail oriented; meets quality standards and demonstrates accuracy and thoroughness Organized; completes work in a timely manner; able to prioritize and meet deadlines Problem-solver; gathers and analyzes information skillfully and generates suggestions for improving work Capable of working independently and as a member of a team; contributes to building a positive team spirit Observes and follows safety procedures

This role is responsible for acting as a testing resource for the lab, supporting the current technicians and provide testing services used to facilitate production and certification of products. This role will also assist in maintaining documentation of test results, procedures and calibration of tools and equipment. Essential Functions: * Provides accurate and timely test results and assist production with in-process testing. * Maintains quality records and procedures. * Performs standard testing in a lab environment when needed * Certifies physical properties to customers and generates certificate of compliance. * Maintains records of calibration and repair and perform calibrations on equipment/tools. * Maintains labs inventory of test consumables. * Reviews compliance of materials to material specifications. * Other duties as assigned. Qualifications: * High School Diploma or equivalent. May consider equivalent experience in lieu of education. * 1+ Year experience in manufacturing environment. * Experience with data analysis and database computer programs. * Experience with quality and other laboratory testing tools.

Wasserstrom, an industry fixture since 1902, is a national leader in the manufacturing of food service equipment. From design to installation, we are a global supplier, custom manufacturer and consolidator of fixtures, furniture, and equipment. Rooted in the food service industry, we provide flexible solutions to targeted markets where you eat, sleep, work, play, shop and gather. We succeed by leveraging our national presence, buying power, regional consolidation, logistics operations, creative experts, and innovative engineering capabilities. We strive to extend our legacy of creating lasting value for our customers, associates, and the communities we serve. Job Summary: This position is responsible for ensuring all finished products are completed according to quality standards and customer specifications. Quality Controllers work closely with engineering to ensure products are completed with all buy-out items and components. Quality Controllers must have strong communication skills to communicate product issues to manufacturing and engineering in a timely manner. Quality Controllers are required to document correction requests, maintain daily product logs, and mark products with ETL (Electrical Testing Laboratories) labels. Quality Controllers are assigned to the manufacturing plant but may also work with other departments, such as engineering, purchasing, and account services. Quality Controllers may perform other tasks as needed. Essential Duties and Responsibilities Inspect finished products for defects Complete standard testing and evaluation processes Approve finished products for shipment Document correction requests and maintain daily product logs Communicate product issues in a timely manner Work with build documents and basic drawings Experience and Education: High School or GED 6 - 12 months related experience and/or training Position Requirements: Knowledge of proper quality control procedures Mechanically inclined; ability to work with shop machinery and basic hand tools Ability to read a tape measure accurately to 1/16 th of an inch Ability to add and subtract fractions Communicates well with others; asks for and offers help when needed Detail oriented; meets quality standards and demonstrates accuracy and thoroughness Organized; completes work in a timely manner; able to prioritize and meet deadlines Problem-solver; gathers and analyzes information skillfully and generates suggestions for improving work Capable of working independently and as a member of a team; contributes to building a positive team spirit Observes and follows safety procedures

*REQUIRED: PLEASE ATTACH A RESUME Under general supervision, to inspect produce upon arrival at the Distribution Center and existing produce for quality; accepts or rejects produce that does not meet quality and other standards. Employees in this job classification provide quality control support to management, vendors, stores and the Distribution Center. This job classification requires knowledge of the products, procurement practices and methods and the ability to select and provide produce to customers that meet the company's budgetary and quality requirements EDUCATION AND EXPERIENCE: High school diploma or G.E.D and a minimum of three or more (3+) years' experience in a retail produce department. REQUIRED KNOWLEDGE: Knowledge of local, state and federal laws and regulations, such as FDA and Health. SKILLS/ABILITIES: Ability to work independently. Able to communicate effectively, both verbally and in writing. Able to maintain effective working relationships. Ability to be flexible in changing work priorities. Ability to handle multiple tasks simultaneously within established timelines. Ability to generate work in an accurate and timely manner. Ability to communicate effectively both verbally and in writing; maintain effective working relationships. Good customer service skills. WORK ENVIRONMENT Worked is performed in a distribution center environment with refrigeration temperatures ranging from 34-52 degrees Fahrenheit. Work around pallet jacks and forklifts. PHYSICAL DEMANDS - Employees may occasionally experience the following physical demands for extended periods of time: Standing Sitting Walking throughout the facilities Viewing Computer Monitor Keyboarding Essential Job Functions and Basic Duties POSITION PURPOSE Under general supervision, to inspect produce upon arrival at the Distribution Center and existing produce for quality; accepts or rejects produce that does not meet quality and other standards. Employees in this job classification provide quality control support to management, vendors, stores and the Distribution Center. This job classification requires knowledge of the products, procurement practices and methods and the ability to select and provide produce to customers that meet the company's budgetary and quality requirements. ESSENTIAL JOB FUNCTIONS AND BASIC DUTIES 1. *Performs a physical inspection of all produce received at the Distribution Center prior to product acceptance. Inspects for company standards in quality, size and condition. 2. *Approves produce delivery when standards are met. Rejects produce when standards are not met and informs appropriate staff and vendor. Obtains buyer approval in some situations. 3. *Performs a physical inspection and monitors warehoused produce for quality, shelf life and possible rotation problems. Notifies appropriate staff and vendors for resolution. 4. *Trains new employees in the Distribution Center on produce acceptance standards prior to receiving products from vendors and others. 5. *Coordinates orders with the produce buying team. MINIMUM QUALIFICATIONS EDUCATION AND EXPERIENCE: • High school diploma or G.E.D and a minimum of three or more (3+) years' experience in a retail produce department. REQUIRED KNOWLEDGE: • Knowledge of local, state and federal laws and regulations, such as FDA and Health. SKILLS/ABILITIES: • Ability to work independently. • Able to communicate effectively, both verbally and in writing. • Able to maintain effective working relationships. • Ability to be flexible in changing work priorities. • Ability to handle multiple tasks simultaneously within established timelines. • Ability to generate work in an accurate and timely manner. • Ability to communicate effectively both verbally and in writing; maintain effective working relationships. • Good customer service skills. 1/1/23 Quality Control Produce *Performs a physical inspection of all produce received at the Distribution Center prior to product acceptance. Inspects for company standards in quality, size and condition. *Approves produce delivery when standards are met. Rejects produce when standards are not met and informs appropriate staff and vendor. Obtains buyer approval in some situations. *Performs a physical inspection and monitors warehoused produce for quality, shelf life and possible rotation problems. Notifies appropriate staff and vendors for resolution. *Trains new employees in the Distribution Center on produce acceptance standards prior to receiving products from vendors and others. *Coordinates orders with the produce buying team CERTIFICS REQ None PHYSICAL DEMANDS - Employees may occasionally experience the following physical demands for extended periods of time: • Standing • Sitting • Walking throughout the facilities • Viewing computer monitor • Keyboarding WORK ENVIRONMENT Worked is performed in a distribution center environment with refrigeration temperatures ranging from 34-52 degrees Fahrenheit. Work around pallet jacks and forklifts.