Quality control technician jobs in Hamden, CT

Morris, CT i2Systems is a leading designer and manufacturer of LED lighting systems used in demanding and high reliability applications. The i2Systems team designs and builds advanced lighting modules concentrating on wellness, energy efficiency, and high-quality illumination of North America's premier spaces. What to Expect: The Production Technician - Field Service is a hybrid role supporting both real-time production troubleshooting and customer field service needs. Approximately 60% of this position focuses on diagnosing and resolving production line failures to keep manufacturing operations running smoothly, while the remaining time is dedicated to providing on-site technical support to customers. This individual will also participate in pre-construction meetings, job-site troubleshooting, and system commissioning. The ideal candidate is hands-on, adaptable, professional under pressure, and willing to travel on short notice. This is a mid-level role requiring adaptability, professionalism, and calm problem-solving under pressure. What You'll Do: Diagnose and troubleshoot production line issues in real time, including electrical, wiring, mechanical, and test/debug failures. Support production teams by repairing fixtures, resolving process interruptions, and minimizing downtime. Support field service activities, including product installation, commissioning, and issue resolution at customer sites. Participate in pre-construction and coordination meetings to review system layouts, electrical requirements, and installation details. Read and interpret wiring diagrams, schematics, and construction drawings to diagnose and resolve issues. Work closely with Engineering, Production, and Project Management teams to ensure technical accuracy and customer satisfaction. Maintain detailed documentation of troubleshooting steps, repair work, and field service reports. Travel as required - sometimes on short notice (less than 24 hours) - to customer sites, primarily within the Northeast region but throughout the country. Represent i2Systems professionally at all times, maintaining composure and strong communication in demanding field environments. What You'll Bring: 2-5 years of experience in production support, field service, or technical troubleshooting - ideally in an electrical, electronics, or manufacturing environment. Strong understanding of electrical systems (low-voltage acceptable), wiring, and test/debug processes, with the ability to read electrical schematics. Hands-on mechanical and troubleshooting skills with a proactive approach to problem solving. Professional communication skills and the ability to interact confidently with customers and contractors. Ability to travel as required and adapt quickly to changing schedules and priorities. Self-motivated and organized, with a strong commitment to safety, quality, and operational uptime. Compensation and Benefits: Compensation basked on experience and skill.

Quality Technician I Shift: 2nd Shift (3:30 PM - 12:00 AM) Job Type: Temp/Contract About the Role The Quality Technician I supports daily Quality Assurance operations to ensure that nonconforming products are identified, contained, and prevented from reaching customers. This role plays a key function in product inspection, auditing, and process improvements to sustain and elevate overall product quality. Key Responsibilities Perform product audits and inspections following established quality-assurance procedures. Support investigations for nonconforming materials and communicate findings to authorized vendors. Collaborate with management and team members to resolve new or complex quality issues. Assist with implementing new product quality plans and process improvements. Understand and follow technical requirements within defined quality frameworks. Support ISO 9001 Quality Management System activities as needed. Qualifications High School Diploma or equivalent required 0-3 years of experience in quality, manufacturing, or related fields Ability to learn and apply technical information Beginner-level proficiency with Microsoft Word, Excel, and Outlook Strong communication skills in English (written and verbal) Ability to thrive in a fast-paced, multitask environment Reliable attendance, teamwork, and time-management skills

We have a great opportunity for an experienced Quality Inspector- GD&T Specialist Full time, 1st shift position. Pay: $20-$28/hour Responsibilities: Perform final inspections of finished products for quality and compliance to specifications Interpret and apply Geometric Dimensioning and Tolerancing (GD&T) to verify product dimensions Confirm compliance with special processes, material specifications, and Non-Destructive Testing (NDT) certifications Conduct visual inspections for surface finish, coatings, and part markings Use precision measuring tools such as micrometers, calipers, and height gauges Document inspection results and report non-conformances to the production team Collaborate on continuous improvement initiatives to enhance quality and efficiency Qualifications/Experience: High school diploma or equivalent Minimum of 2 years of quality inspection experience in a manufacturing environment Strong working knowledge of GD&T and ability to read and interpret engineering drawings Familiarity with materials, special processes, and NDT certifications Experience using precision measuring tools Proficient with Microsoft Office; experience with quality management systems is a plus Ability to lift up to 50 lbs and work both independently and as part of a team Compensation: Competitive wages based on experience Healthcare coverage, including vision and dental 401(k) with company contribution and profit sharing Paid time off and paid holidays Performance-based bonuses If qualified and interested in this position, contact Recruiter Damaris Diaz, call 203-213-6925 or email, damaris.diaz@expresspros.com

Perform Return to Service process and approve aircraft for return to service in accordance with the applicable regulations as authorized and delegated by the repair station accountable manager. Upon A/C arrival, obtain associated documentation, inventory and secure all aircraft documents as required. Perform inspections of aircraft, engines, parts and components, precision tools, equipment and other materials in accordance with applicable regulatory requirements. Inspect aircraft maintenance and in-process inspections for repairs and alterations performed by Aircraft Maintenance Technicians to verify and/or approve corrective actions. Upon receipt, perform inspection of all new, repaired and rebuilt parts / components for evidence for physical damage, count and conformity Ensure that all work packages (orders and forms) as well as records of arrival (debrief checklist) and maintenance actions performed are documented accurately and that all specialized customer forms, and Bombardier and Learjet forms (i.e., RED, RFE & SRPSA) are documented accurately. Research aircraft drawings and technical data (i.e., REO, EO, DCN) as required. Perform walk around inspection of aircraft prior to release from maintenance when required. Assist customers as required. Perform other tasks as required Requirements Have 3 to 4 years' aircraft maintenance experience Have 1 year corporate / commercial jet experience Have the ability to read and interpret engineering documents and maintenance manuals Have the ability to read, write, and understand the English language Have an Airframe & Powerplant (A&P) Certificate Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY, is seeking an experienced Mechanical Quality Control Inspector. Duties include: Read blueprints and instructions for quality expectations for products and supplies Inspection of raw materials to quality standards Inspections including First article using appropriate methods including measuring dimensions, testing functionality, reviewing specifications, etc. Use of various systems to perform complex testing procedures Maintain records of testing, information and various metrics. Monitor the use of equipment to ensure it is safe and well-maintained. Prepare and submit reports to quality management Qualifications: Knowledge of Aerospace Manufacturing is required including processing and fabrication methods. Minimum 3 years experience in manufacturing quality control inspections. Ability to read and understand blueprints and instructions. Ability to work independently with hand measuring equipment including calipers and micrometers. Ability to do independent first piece inspection on sheet metal parts, machined parts and assemblies. Ability to lift heavy materials (up to 40 lbs.) Computer skills are a must. Experience working within an AS9100 quality environment is a plus. Working knowledge with CMM inspections Familiarity with composite materials is a plus. Requirements: U.S. Citizen High School Diploma or equivalent Salary Range: $24.00 per hour - $30.00 per hour This is an estimated salary range with any actual compensation offers to be dependent upon factors including experience, skill set, qualifications, and other factors allowed by law. Job Type: Full-time FLSA Classification: Non-exempt Benefits include: Paid Time Off, Medical Insurance, FSA (Flexible Spending Account), Dental Benefit, Aflac Supplemental Insurance, Life Insurance, 401k with company match. EOE / Veteran / Disability Please Contact: [email protected]

Setting: Hospital? Are you ready to take your expertise as a cardiovascular technologist to new heights? Join Jackson HealthPros as a cath lab tech (Cardiovascular Invasive Specialist) and play a vital role on a team that values your expertise-while enjoying the excitement of a new location. Earn full time pay and benefits while you assist physicians and other Cath lab personnel in conducting vital diagnostic tests and procedures; and operate advanced medical equipment to capture crucial images and data of the heart and blood vessels. What You'll Need: ARRT certified Radiologic Technologist Registered Cardiovascular Invasive Specialist (RCIS) certification from Cardiovascular Credentialing International (CCI) preferred. Must have 2 years' experience in a Cath Lab hospital setting BLS & ACLS Certification (American Heart Association preferred) State specific licensing when required Apply now and you'll be contacted by a recruiter who'll fill you in with the details. Benefits Designed for Travelers We deeply value your commitment to impacting others, that's why we offer a comprehensive and competitive benefits package starting your first day. Weekly, On-Time Pay because that's how it should be Full Medical Benefits & 401k Matching Plan 24/7 Recruiter: Your main point of contact available by text, phone or email Competitive Referral Bonuses 100% Paid Housing Available Travel & License Reimbursement Impacting the Quality of Care for Patients Nationwide As a healthcare professional with Jackson HealthPros, you get the flexibility, stability and growth you need with the satisfaction of impacting communities nationwide. Choose from a variety of career options including direct hire, temp-to-hire, and travel contracts in cities coast to coast. Get full-time pay, benefits, and relocation assistance (at no cost to you) in travel contracts that give you the freedom to explore, with the stability of a full-time job. Find your perfect match with ProVenture, our AI enhanced career app designed just for you. EEO Statement Jackson Healthcare and its family of companies are an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender, gender identity and expression, national origin, age, disability or protected veteran status. We celebrate diversity and are committed to creating an inclusive environment for all of our associates. Join our team as a traveling Physical Therapist where you'll help patients recover from injuries and manage chronic conditions while experiencing life in a new location. Apply now and we'll connect you with a recruiter who'll reach out with more details.

The Senior Quality Control Technician role in our Bloomfield, CT facility drives improvement in the reliability of CO2 Laser products. The incumbent will be engaging directly with a cross functional team on a wide variety of products to ensure our product and processes meet the dynamic laser manufacturing requirements. Working with a quality mindset team, this role will provide hands on support for the incoming goods, in-process, and final inspection of laser systems to ensure we meet Coherent Quality Standards. Primary Duties & Responsibilities Inspection manufactured laser systems: Detail oriented inspection of electronic and mechanical assemblies Utilize common inspection methods to evaluate critical design requirements Develop inspection test plans with a cross functional team Assist in problem solving activities to support identified nonconformities Evaluation and verification of purchased components Define and execute incoming material test plans for qualification activities Document and present inspection results to key stakeholders Verification of vendor supplied documentation including first article inspections and material certifications Support of Quality Systems: Document detailed findings to be used for Continuous Improvement Initiatives Accomplish root cause analysis and provide corrective actions with follow-up Ensure practices align with best practices, procedures and inspection techniques Perform internal product and business system audits Reliability system maintenance: Utilize computers for automated data collection and control of instruments Collaborate with the Quality organization regarding calibration of test instruments Monitor and troubleshoot long term unmanned tests with engineering support Assist in developing new methods and protocols for component level testing and measurement Complete calibration of monitoring and measuring equipment support Education & Experience High School diploma A minimum of 4 years of related experience or combination of education and relevant experience Proficient in the use of automated and manual measuring devices and test equipment Excellent verbal and written skills in the English language required Skills Preferred experience with layout inspections and sound Geometric Dimensioning and Tolerancing knowledge Preferred experience automating inspection test method is preferred Knowledge of centralizing data for analysis Experience of test and measurement of electronic and/or optical systems Continuous improvement mindset - improves products and processes Well organized and knowledgeable of 6S methodology Demonstrated problem-solving abilities combined with hands-on experience Knowledge of electronic component manufacturing Self-motivated to thoroughly document data and test results Working Conditions Manufacturing working environment. Some areas under cleanroom protocol. Minimal to no expected travel Support of seconds shift operations required This is an on-site position in our Bloomfield, CT facility. Shift will be Monday to Friday 11am to 7:30pm Physical Requirements Must be able to move around manufacturing floor Must be able to lift a maximum of 30 pounds Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at [email protected].About Us Coherent is a global leader in lasers, engineered materials and networking components. We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program. It's an exciting opportunity to work for a company that offers stability, longevity and growth. Come Join Us! Note to recruiters and employment agencies: We will not pay for unsolicited resumes from recruiters and employment agencies unless we have a signed agreement and have required assistance, in writing, for a specific opening.

Position Type: Full Time, 40h/week FLSA Classification: Non-Exempt : Roto Frank of America, Inc. is looking for a Maintenance & Quality Technician-2nd Shift to join our team in Chester, CT. Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 18 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: We are looking for an enthusiastic and passionate individual to join our 2nd shift maintenance and QC team in Chester, CT. The Maintenance and Quality Control Technician will be accountable for the general maintenance and repairs for assigned equipment and be responsible for the quality of produced parts. This position is full time, on site in Chester, CT 3:30pm through 12:00am. There may be occasional overtime as required by business needs. Essential Functions: All aspects of maintenance of the assembly lines and quality control. Inspects and identifies equipment or machines in need of repair. Perform advanced troubleshooting to determine necessary repairs. Order supplies and materials needed for repairs and maintenance. Perform PM (preventative maintenance) on all assembly equipment. Basic milling and lathe work. Ability to use hand tools and power tools. Basic tool repair (grinding, polishing, etc.). Knowledge of general carpentry and repair. Use a pallet jack/forklift. Read and understand engineering drawings (dimensioning and tolerancing). Perform tests according to company quality standards; report results to supervisor for analysis and action steps. Consult with supervisor to determine appropriate recommendations and remedies for questionable products. Perform critical dimension checks on incoming products and raw materials. Use calipers, metric tape, and other measuring devices to determine fine color distinctions. Perform visual quality inspection of incoming finished products. Perform first-piece inspections and checks as noted on production sheets. Create NMRs and control rejected material. Provide support to receiving by identifying material as needed. Computer data entry using SAP system. General housekeeping. Observe all safety requirements. Must wear safety equipment as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Required Skills & Competencies: Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions. Excellent organizational & time management skills. Assumes responsibility without supervision, self-motivated, and proactive. Ability to follow instructions from supervisors Quality focus along with first piece/last piece expertise Work Environment: Production environment work and physical position. Work requires sitting, standing, and/or walking for long periods, moving and examining objects at high and low reach. Must be physically able to climb ladders, bend or crawl into awkward spaces. Able to drive forklift. Dexterity and accuracy needed to operate testing equipment or gauges. Hand-eye coordination. Must be able to lift up to 50 pounds at a time. Minimum Required Education: High School diploma or equivalent required On-the-job training offered Valid Driver License Required Required Work Experience: Related experience of 2 years preferred Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays Pay Range: The Pay Range for this position is $27.00 - 29.00 hourly. The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. The pay range listed here has been provided to comply with local regulations and represents a potential pay range for this role.

Job Description Required Qualifications: High School Diploma or equivalent - Required Quality Inspection Experience (2 to 4 years) Strongly Preferred High attention to detail and consistency Experience with basic measuring equipment such as calipers or micrometers and other common inspection tools Experience reading and interpreting blueprints and specifications Experience in a smaller production environment Some experience with Visual Measuring Systems desired Responsibilities: Scope: Our Quality Inspectors compare measurements, form, fit, function, and value judgments of simple and complex parts to blueprint specifications and general workmanship standards using documents, experience, and knowledge of inspection techniques of Saint-Gobain/American Seal & Engineering Co. The Quality Inspector is responsible for ensuring Good Documentation Practices are utilized throughout all quality records that are reviewed/completed/inspected/audited. Essential Functions: Inspect manufactured product for dimensional consistency, workmanship and finish. Maintains the flow of product through inspection in a timely manner meeting due dates for outside processes and customer deliveries. Inspects incoming materials for conformance to requirements, reviews certifications for conformance, issues DMR or NCMR in our ERP system if needed. Performs In-process inspection. Reviews certification packages for product and releases for shipment in ERP system. Files electronic data on server and maintains accurate and orderly certification files in QA. Assists the lead Inspector and department manager as needed. Other tasks as assigned. Comments/Special Instructions: Ideal candidate will have previous experience in a fast-paced manufacturing environment.

Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Job Title: Quality Technician III Salary: $ Depending on experience Hours: 7:00 AM - 3:30 PM Duration: Direct Hire and Special DutiesThis position requires a minimum of 7 years of advanced inspection experience, including detailed layouts, setups, and visual inspections. Responsibilities include performing inspections for receiving, first article, first piece, in-process, final, and non-routine inspection activities on components (e.g., parts, sub-assemblies, finished goods, tooling, gages, fixtures, etc.). Additional duties may be assigned as required.Compensation & Benefits Competitive pay Medical, dental, and vision insurance Paid vacation Excusable allowance hours 401(k) retirement plan Education & Experience Requirements High school diploma or technical school equivalent with emphasis in mathematics ASQ CQT certification preferred Calibration experience preferred Experience inspecting high-precision, tight-tolerance parts in industries such as: Aerospace (ISO 9001/AS9100) Automotive (IATF 16949) Medical Device (ISO 13485) Military/Government Familiarity with both low- and high-volume production environments Compliance & Citizenship Requirements Must be a U.S. Citizen or U.S. Permanent Resident Green Card holder (ITAR compliance required) Skills & ResponsibilitiesCandidates must demonstrate proficiency in the following areas: Blueprint reading and GD&T interpretation (e.g., true position, profile of a line/surface) Interpretation of customer blueprints, material specs, and MIL-SPECs Understanding of the PPAP process Programming and operation of Vision Systems and CMMs (Starrett preferred) Proficient use of inspection tools including: Micrometers, calipers, indicators, comparators, gage pins Hardness testers, concentricity gages Surface plate setups using height gages, sine plates, v-blocks, etc. Development of inspection instructions and method setup sheets Maintenance of quality records and documentation Mentoring of Level I and II Inspectors Anticipating inspection needs, taking initiative, and escalating issues appropriately Communicating inspection deviations and generating nonconformance reports Supporting lean initiatives and continuous improvement efforts Maintaining safety, environmental, housekeeping, and documentation standards Company OverviewFounded in 2010, Top Prospect Group focuses on matching high-quality candidates with top clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology and professional services. Qualified candidates are encouraged to apply immediately! Please include a clean copy of your resume, salary expectations, and any references in your application. #INDTPGSHELTON

Job Description Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

UPM Quality Technician assures that the product supplied to our customers meets the Quality parameters set forth by United Performance Metals and that each shipment conforms to all specified agreed customer, regulatory, and internal requirements. Daily Activities Include: Review product certifications for release acceptance or discrepancy resolution. Identify and quarantine nonconforming material. Inspect and resolve questionable material issues involving product integrity. Conduct inspection of product when required or requested. Assist with inspection layout and set-up as needed. Maintain a full understanding of United Performance Metals' Quality Manual, Operating Procedures, and Work Instructions: How they relate to AMS, ASTM, AISI, AS9100, and ISO-9001 Requirements. Process and administrate requests for certification updates. Understand and apply measuring techniques with internal operating procedure and equipment. Schedule meetings, as needed, to resolve non-conforming and process issues. Investigate and resolve non-conformities Support sales with certification and compliance requests. Support operations and production with order and material-technical needs. Maintain AMS/UPM specification spreadsheet used to verify the compliance of mill test reports. Oversee the inspection and measuring of test equipment. Maintain identification of the testing equipment and documentation providing traceability and calibration frequency. Initiate and maintain the ongoing assessment and approval of subcontractors. Perform periodic audits of suppliers and subcontractors. Responsible for administration of appropriate customer release program. Assist as needed with compliance audits. Maintain required customer approval and certification. Fill out and respond to customer survey requests. Assist as needed with customer and regulatory audits. Continued education and training of metals applications, industry requirements, and customer focus activities. Assist as needed with internal audits. Maintain and report on shelf-life sensitive items that are maintained in inventory to ensure the products are not expired beyond use. Other duties as assigned. Preferred Experience At least 1-2 years Quality related experience and/or training Supplier-required certificates - i.e., GE DSQR, PWA SDRA Aerospace experience We have Great Benefits: 3+weeks of PTO Paid Holidays Medical, Vision, & Dental Insurance 401k Match Quarterly bonuses Tuition Reimbursement

**Country:** United States of America , Medford, NY, 11763 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. **What You Will Do:** + Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits). + Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s). + Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives. + Support generation of FAI and corresponding documentation. + Review incoming FAI to ensure compliance to Collins and AS9102 standards. + Any other function(s) as assigned by management. **Qualifications You Must Have:** + Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience. + Experience in a quality environment within the aerospace or defense industry. **Qualifications We Prefer:** + AS9102 experience + Good communications skills and the ability to work within a team. Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. **What We Offer:** Some of our competitive benefits package includes: + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! Learn More & Apply Now! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. Apply now and be part of the team that's redefining aerospace, every day. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 44,000 USD - 78,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Job Details Riverhead, NY $22.00 - $25.00 HourlyDescription Vybond is a global market leader in pressure-sensitive adhesive tapes, delivering innovative solutions to a variety of industrial and specialty markets. Headquartered in Franklin, KY, with facilities in Riverhead, NY, and Bristol, RI, Vybond Group, Inc. manufactures specialty foil, film, and duct tapes and adhesives. With over 1,500 specialty SKUs spanning 500+ product families, Vybond serves 1,500+ customers across the HVAC, building and construction, industrial, retail, medical, aerospace, automotive, and other specialty industries. Must be willing to work NIGHT SHIFT: 7pm-5am Monday -Thursday Job Summary: We are seeking a motivated and detail-oriented professional to join our team as a Quality Assurance Technician. In this role, you will play a vital part in supporting our operational goals while contributing to a collaborative and high-performance culture. The ideal candidate brings strong problem-solving skills, adaptability, and a drive to learn and grow within a dynamic environment. Key Responsibilities: Collect coated samples and perform routine tests on in-process and finished goods. Work from established procedures, written and/or verbal instructions. Work with various test equipment and use of personal computer. Test production samples. Complete testing as required by specifications and procedures. Interpret the specification to determine the proper specification to use. Understand test procedure to properly set up for product being tested. Record test data on lab sheets, package retain samples (if required), review test data, make copies of lab sheets and report to supervisor. Complete periodic and additional assigned testing duties such as vendor items, customer complaint products and experimental production work. Perform product audits in warehouse as directed by supervisor. Collect product samples from manufacturing equipment. Perform product checks of held material at slitters. Maintain required records and reports. Detect and report unusual conditions to proper supervision. Follow and rigorously enforce all safety rules and regulations; participate in the safety team, as required Maintain work area and equipment in a clean and orderly condition. Perform inspection of finished goods; apply appropriate status ticket. Perform other duties as required or directed. Other Responsibilities: Perform additional responsibilities as needed. Qualifications Qualifications: High School Diploma or equivalent 1-2 years' experience in the quality function preferred. Knowledge of SPC techniques.. Maintain a safe work environment. Must be able to work overtime as required. Must be able to perform all duties in a safe and effective manner Ability to read and write in English. Compensation: $22-$25 plus night differential. Medical Benefits, 401k, Vacation and sick time off, holidays. Must be willing to work NIGHT SHIFT: 7pm-5am Monday -Thursday

Linde Advanced Material Technologies Inc. Quality Technician - Inspector Manchester, CT, United States | req26454 1st shift, Monday-Friday from 07:00am - 03:30pm What you will enjoy doing* * You will perform inspections, as well as in-process and final inspection of parts and assemblies in accordance with applicable engineering standards * In this role you will inspect parts using precision measurement equipment/devices * You will assist engineering and operations in the investigation of non-conformities * In this role you will also play a part in contract review of customer orders ensuring adherence to all applicable specifications * You are responsible for ensuring proper documentation including fine print details on all product certifications What makes you great * High Diploma or GED is required for this role * The ideal candidate will have 3 - 5 years of aviation experience and 2 years of inspection experience applying GD&T Principles and practices * You have knowledge of ISO9001 & AS9100 Quality Management systems; working knowledge of First Article Inspection requirements per AS9102 * Proficient in Microsoft Office Suite * Knowledge of common inspection measuring equipment is also a plus Why you will love working with us Linde Advanced Material Technologies, formerly Praxair Surface Technologies, is a company that revolutionizes industries through innovative materials and surface coatings. We are leaders in advanced materials and offer metal powders, sputtering targets, and surface coatings that enhance performance across various sectors. Our strong focus on innovation is evident in our superior technologies for the aerospace, energy, semiconductor, automotive, and industrial industries. Linde employees learn and abide the Linde Code of Ethics and Code of Conduct by demonstrating honesty, integrity, professionalism in all communications, actions, and decisions. What we offer you! At Linde, the sky is not the limit. If you're looking to build a career where your work reaches beyond your job description and betters the people with whom you work, the communities we serve, and the world in which we all live, at Linde, your opportunities are limitless. Be Linde. Be Limitless. Linde offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! Have we inspired you? Let´s talk about it We are looking forward to receiving your complete application. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. Linde Advanced Material Technologies Inc. abides by applicable export control laws including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR) in accordance with the company's export control procedures. As such, persons considered for this position must be either a U.S. Citizen, Permanent Resident (green card holder) or otherwise classifiable as a U.S. person under relevant regulations. Linde Advanced Material Technologies Inc. acts responsibly towards its shareholders, business partners, employees, society and the environment in every one of its business areas, regions and locations across the globe. The company is committed to technologies and products that unite the goals of customer value and sustainable development. * The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Therefore employees assigned may be required to perform additional job tasks required by the manager. #LI-JD1

Highlights Department: Diagnostic Imaging Hours: Per Diem The Cardiac Sonographer performs high-quality diagnostic imaging for our patients and families with respect, compassion and sensitivity to their age-specific patient needs to all gender, cultures, religions and socioeconomic backgrounds. The expectation and primary focus of this position is to perform Echocardiograms with M Mode, 2-D Doppler, Color Flow, TEE, contrast & bubble studies in our IAC accredited Echo lab. The sonographer must be competent and knowledgeable of cardiac pathology and procedures to educate and provide instructions to staff, students and patients with expertise and precision. Minimum Qualifications: Registered (CCI), (RDCS) or registry eligible. Experience in 2-D, Doppler, color flow and transesophageal echo. Must demonstrate the ability to function in a professional and independent manner under broad supervision and function effectively and be resourceful in emergency situations Hold a current certification in Basic Life Support Benefits of Working at Middlesex Health When you choose Middlesex Health, you have chosen a health care system that strives for excellence in patient care as well as employee satisfaction. In fact, we firmly believe they go hand-in-hand. Middlesex Health offers competitive salaries and a wide array of additional benefits. About Middlesex Health The Smarter Choice for your Career! Come join one of Connecticuts Top Workplaces, and a Magnet designated organization! At Middlesex Health, we have a unique combination of award-winning talent, world-class technology, and patient-first care that's making health care better. Through our affiliation with the Mayo Clinic Care Network, Middlesex Health has access to the most advanced medical knowledge and research available.

The Senior Quality Control Technician role in our Bloomfield, CT facility drives improvement in the reliability of CO2 Laser products. The incumbent will be engaging directly with a cross functional team on a wide variety of products to ensure our product and processes meet the dynamic laser manufacturing requirements. Working with a quality mindset team, this role will provide hands on support for the incoming goods, in-process, and final inspection of laser systems to ensure we meet Coherent Quality Standards. Primary Duties & Responsibilities Inspection manufactured laser systems: Detail oriented inspection of electronic and mechanical assemblies Utilize common inspection methods to evaluate critical design requirements Develop inspection test plans with a cross functional team Assist in problem solving activities to support identified nonconformities Evaluation and verification of purchased components Define and execute incoming material test plans for qualification activities Document and present inspection results to key stakeholders Verification of vendor supplied documentation including first article inspections and material certifications Support of Quality Systems: Document detailed findings to be used for Continuous Improvement Initiatives Accomplish root cause analysis and provide corrective actions with follow-up Ensure practices align with best practices, procedures and inspection techniques Perform internal product and business system audits Reliability system maintenance: Utilize computers for automated data collection and control of instruments Collaborate with the Quality organization regarding calibration of test instruments Monitor and troubleshoot long term unmanned tests with engineering support Assist in developing new methods and protocols for component level testing and measurement Complete calibration of monitoring and measuring equipment support Education & Experience High School diploma A minimum of 4 years of related experience or combination of education and relevant experience Proficient in the use of automated and manual measuring devices and test equipment Excellent verbal and written skills in the English language required Skills Preferred experience with layout inspections and sound Geometric Dimensioning and Tolerancing knowledge Preferred experience automating inspection test method is preferred Knowledge of centralizing data for analysis Experience of test and measurement of electronic and/or optical systems Continuous improvement mindset - improves products and processes Well organized and knowledgeable of 6S methodology Demonstrated problem-solving abilities combined with hands-on experience Knowledge of electronic component manufacturing Self-motivated to thoroughly document data and test results Working Conditions Manufacturing working environment. Some areas under cleanroom protocol. Minimal to no expected travel Support of seconds shift operations required This is an on-site position in our Bloomfield, CT facility. Shift will be Monday to Friday 11am to 7:30pm Physical Requirements Must be able to move around manufacturing floor Must be able to lift a maximum of 30 pounds Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

Position Type: Full Time, 40h/week FLSA Classification: Non-Exempt : Roto Frank of America, Inc. is looking for a Maintenance & Quality Technician-2nd Shift to join our team in Chester, CT. Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 18 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: We are looking for an enthusiastic and passionate individual to join our 2nd shift maintenance and QC team in Chester, CT. The Maintenance and Quality Control Technician will be accountable for the general maintenance and repairs for assigned equipment and be responsible for the quality of produced parts. This position is full time, on site in Chester, CT 3:30pm through 12:00am. There may be occasional overtime as required by business needs. Essential Functions: All aspects of maintenance of the assembly lines and quality control. Inspects and identifies equipment or machines in need of repair. Perform advanced troubleshooting to determine necessary repairs. Order supplies and materials needed for repairs and maintenance. Perform PM (preventative maintenance) on all assembly equipment. Basic milling and lathe work. Ability to use hand tools and power tools. Basic tool repair (grinding, polishing, etc.). Knowledge of general carpentry and repair. Use a pallet jack/forklift. Read and understand engineering drawings (dimensioning and tolerancing). Perform tests according to company quality standards; report results to supervisor for analysis and action steps. Consult with supervisor to determine appropriate recommendations and remedies for questionable products. Perform critical dimension checks on incoming products and raw materials. Use calipers, metric tape, and other measuring devices to determine fine color distinctions. Perform visual quality inspection of incoming finished products. Perform first-piece inspections and checks as noted on production sheets. Create NMRs and control rejected material. Provide support to receiving by identifying material as needed. Computer data entry using SAP system. General housekeeping. Observe all safety requirements. Must wear safety equipment as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Required Skills & Competencies: Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions. Excellent organizational & time management skills. Assumes responsibility without supervision, self-motivated, and proactive. Ability to follow instructions from supervisors Quality focus along with first piece/last piece expertise Work Environment: Production environment work and physical position. Work requires sitting, standing, and/or walking for long periods, moving and examining objects at high and low reach. Must be physically able to climb ladders, bend or crawl into awkward spaces. Able to drive forklift. Dexterity and accuracy needed to operate testing equipment or gauges. Hand-eye coordination. Must be able to lift up to 50 pounds at a time. Minimum Required Education: High School diploma or equivalent required On-the-job training offered Valid Driver License Required Required Work Experience: Related experience of 2 years preferred Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays Pay Range: The Pay Range for this position is $27.00 - 29.00 hourly. The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. The pay range listed here has been provided to comply with local regulations and represents a potential pay range for this role.