Quality control technician jobs in Hamilton, NJ - 343 jobs

Manufacturing Analytical Technician (Chemical Industry) Croydon,PA (onsite) Apply only if you have experience in Chemical Industry and if you are fine to work in Rotating Shifts. Supports manufacturing operations by conducting laboratory analyses, as needed, which provide critical data. Prepares samples, performs preventive maintenance of laboratory instrumentation and uses data systems to acquire data. Reports results to the client. Requires established basic laboratory skills to perform a range of routine lab activities using existing standard operating procedures and or analytical scientific methods. Responsibilities Duties Trains to perform routine analyses under direction of senior team member until proficiency is demonstrated. Collects samples according to the Sample Plan. Performs basic preventative maintenance of analytical systems. Provides evaluation of validity of data for routine analyses and takes appropriate action. Monitors analytical systems and escalates problems as appropriate. Documents, communicates and archives analytical results and data. Follows EHandS and operating discipline management system (ODMS) procedures and practices for work tasks. Suggests improvements to lab work processes and tools. Escalates non-routine requests to appropriate team member for follow-up. Experience Completion of Vocational Education or Upper Secondary Education (i.e. High School Diploma) plus laboratory, manufacturing or other related experience. Post Upper Secondary Education coursework in chemistry or related coursework.

Job Title: Lab TechnicianJob Description The Lab Technician will perform activities necessary to maintain and operate the development work in the laboratory under supervision. The role includes performing technical tasks, stability work, and routine and non-routine ordering of raw materials. Additionally, the technician will manage time for environmental stability and validation samples with their supervisor. Responsibilities + Laboratory batching of prototype and final formulations (liquid, emulsion, and surfactant formulas) for clinical and consumer studies, product stability testing, and customer review using approved procedures upon completion of successful training. + Maintain and calibrate laboratory equipment, including balances, pH meters, viscometers, etc. + Manage time independently and ensure proper documentation of notebooks, logbooks, and other documentation such as raw material MSDS in accordance with laboratory procedures and corporate safety and quality standards. + Participate in the investigation of out-of-specification test results or stability issues and review findings with Laboratory management. + Sample management and ordering of raw materials and finished goods. + Evaluate and analyze competitive products and report results. + Assist in cleaning lab glassware using the dishwasher and maintain laboratory space to ensure a clean working environment following all corporate health and safety protocols. Essential Skills + Understanding of laboratory safety requirements, working with laboratory chemicals, and the MSDS system. + General understanding of chemical test methods and chemical instrumentation. + Basic wet chemistry techniques. Additional Skills & Qualifications + High school diploma or a 2-year associate degree in a technical or science field, preferably in Chemistry or Biology. + Some chemistry lab work experience from high school or college is required. + Prior experience in a laboratory environment, such as Research & Development, Quality Assurance, or Quality Control, is desirable. + Experience working with personal care, hair care, skin care, or oral care products is desirable. Work Environment The work environment includes using laboratory equipment such as balances, pH meters, and viscometers. The role involves maintaining a clean laboratory space and adhering to corporate health and safety protocols. The technician will work with laboratory chemicals, perform chemical test methods, and use chemical instrumentation in a collaborative setting. Job Type & Location This is a Contract position based out of Lakewood, NJ. Pay and Benefits The pay range for this position is $25.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lakewood,NJ. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Contract for 12 Months with potential to extend Monday - Thursday, 8:00AM - 4:00PM EST Onsite in Piscataway, NJ The individual will be working in an industry lab setting, namely, Oral Care Product Development. The candidate's main responsibility will be the production of lab batches for toothpaste on a daily basis, the running of in-vitro assays, the creation of stability protocols in LabNet and the organization and tracking of samples for testing and aging analysis. The candidate will support other lab personnel with the functional testing of products as required per protocols. Additionally, proper documentation of work and results are very important.

Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific Foods, Pepperidge Farm, Prego, Pace, Rao's Homemade, Snack Factory, Snyder's of Hanover. Swanson, and V8. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Why Campbell's… Benefits begin on day one and include medical, dental, short and long-term disability, AD&D, and life insurance (for individual, families, and domestic partners). Employees are eligible for our matching 401(k) plan and can enroll on the first day of employment with immediate vesting. Campbell's offers unlimited sick time along with paid time off and holiday pay. If in WHQ - free access to the fitness center. Access to on-site day care (operated by Bright Horizons) and company store. Giving back to the communities where our employees work and live is very important to Campbell's. Our “Campbell's Cares” program matches employee donations and/or volunteer activity up to $1,500 annually. Campbell's has a variety of Employee Resource Groups (ERGs) to support employees. How You Will Make History Here… As a Senior Technician - QA, you will play a critical role in ensuring the highest standards of food safety and quality in our plant operations. You will manage regulatory compliance, oversee quality assurance programs, and support continuous improvement initiatives that uphold our commitment to excellence. What You Will Do… Execute daily distribution, collection, and review of control documentation for product manufacturing and release, ensuring compliance with quality standards and product specifications. Collaborate with production teams to monitor processes and drive efficiency and continuous improvement. Support preparation and execution of third-party and regulatory audits by maintaining food safety and quality policies, standards, and procedures. Plan and execute work through eMaint Application as Site Administrator. Manage Environmental Monitoring Program (EMP) and Alchemy training program for quality and safety. Oversee in-process quality for plant operations and Kitchen 1869, including routine sample analyses and adherence to Good Laboratory Practices. Conduct GAP assessments, root cause analysis, and manage corrective and preventive actions (CAPA). Support plant safety processes through audits, corrective actions, and document management. Other duties as assigned. Who You Will Work With… You will collaborate closely with: Plant Operations and R&D teams, including Kitchen 1869. Quality Manager and North American Supply Chain Quality group. USDA onsite officials and third-party auditors. What You Bring to the Table… (Must Have) High School Diploma required Minimum 3 years of experience with a BS degree OR 8 years in a fast-paced food manufacturing environment. Strong verbal and written communication skills. Proven planning, organizing, leadership, and teamwork abilities. Knowledge of canning and thermal processing. Background in food processing and quality assurance. Ability to drive quality initiatives in a dynamic environment. Problem-solving and analytical thinking skills. Proficiency with computer systems, SharePoint, and Microsoft Office Suite. It Would Be Great If You Have… (Nice to Have) BS in Food Science preferred. Experience with HACCP/FSP plans and GFSI audit standards. Familiarity with Alchemy training systems and eMaint planning tools. Understanding of regulatory compliance and food safety programs. Compensation and Benefits: The target base salary range for this full-time, salaried position is between $54,600-$78,400 Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Job DescriptionOVERVIEW: Quality Control Technician:The Quality Control Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the Quality Control Technician - Manufacturing is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. This position runs Monday - Friday, with the following shifts: 2nd Shift: 2:00 PM - 10:30 PM 3rd Shift: 10:00 PM - 6:30 AM QUALIFICATIONS: Quality Control Technician: High school diploma or equivalent qualification. Certification in quality control is preferred. Must have food manufacturing experience. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math, technical, and communication skills. Strong understanding of quality control standards and testing techniques. KEY RESPONSIBILITIES: Quality Control Technician: Perform thorough inspections of raw materials, components, and finished products to check for defects, non-conformities, and deviations from quality standards. Work closely with production teams to ensure that manufacturing processes are in compliance with quality standards and are carried out correctly. Inspect finished produced goods to ensure their quality and adherence are up to specifications. Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. Reject all products and materials that fail to meet quality expectations. Collect and take samples of production batch to ensure products are meeting standards. Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. Ensure that inspection and testing equipment are regularly calibrated to maintain accuracy and reliability. Investigate the root causes of quality issues, collaborate with cross-functional teams, and recommend corrective and preventive actions to prevent future occurrences. Conduct internal audits of manufacturing processes and procedures to ensure ongoing compliance with quality standards and regulations. Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. Prioritize safety in the manufacturing environment, ensuring that quality control activities are carried out safely and in accordance with safety protocols. Other duties as assigned. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job Description About us Delva Tool & Machine (DTM) and its 6 locations specialize in precision machining, fabrication, and assembly highly engineered components. With over 175 years of combined experience, 300,000 sq. ft. of floor space, 250 CNC machines and 350 talented employees between 6 locations across the United States and Canada, we leverage our combined expertise and state of the art CNC machining capabilities to deliver quality machined parts to customers all across the globe. Our primary commitment is to provide our customers with a quality product, on-time delivery, and competitive pricing. Core Values Relentlessly Driven to Excel - We take pride in mastering our craft, pushing ourselves to be the best, and constantly improving. “Good enough” is never enough. Tech-Forward Problem-Solvers - We embrace challenges with a solution-oriented mindset, thinking critically and adapting quickly to get the job done. We seek out and leverage the best technology and processes, appropriately automating to be more agile and lean. Accountable & Dependable - We take ownership of our work, meet deadlines, and follow through on our commitment; no excuses and no self-victimizing. Team-First Mentality - We collaborate, communicate, and support each other, knowing that success comes from effective collaboration. Integrity in Everything - We do what's right, even when no one is watching. Honesty, transparency, and respect guide our decisions. Position Summary Delva Tool & Machine (DTM) is seeking a Quality Technician for our Cinnaminson, NJ location. The Quality Technician will work with the Quality Manager and other manufacturing personnel to support our overall quality objectives by developing, implementing, and maintaining reports for customers. If you are looking for an organization and career that will match your strong work ethic and passion for success, Delva Tool & Machine is a great place to start! *This position works a schedule of Monday through Friday from 7:30 a.m. to 4:00 p.m. The salary range for this role is between $41,000 - $83,200 per year, and applies to Quality Technician I, II, and III, with final compensation determined by level, experience, and qualifications* Essential Duties and Responsibilities PositionExperienceEducationEssential Duties and Major ResponsibilitiesQuality Technician I1-2 years' experience in a manufacturing or production environment, preferably within CNC machining, aerospace, defense, or precision manufacturing.High school diploma or equivalent required; technical training, trade school coursework, or relevant quality/manufacturing certifications are preferred and may substitute for formal education based on experience. Perform basic visual, dimensional, and documentation inspections on incoming, in-process, and final products under close supervision. Follow established inspection procedures, quality standards, and work instructions to verify product meets customer and Delva/CMT requirements. Review material certifications, supplier documents, and outside process paperwork for completeness and accuracy. Assist in assembling technical data packages and inspection documentation. Promptly identify, document, and report any nonconforming conditions or discrepancies. Maintain inspection records, logs, and reports in accordance with AS9100/ISO procedures. Support first article inspection preparation by gathering prints, certifications, and required documentation. Perform basic gauge checks, tool verifications, and equipment calibration support tasks as directed. Communicate clearly with Quality and Production personnel regarding inspection results. Adhere to all safety guidelines and maintain a clean and organized inspection area. Assist with other quality-related tasks as assigned. Quality Technician II3-6 years' experience in a manufacturing or production environment, preferably within CNC machining, aerospace, defense, or precision manufacturing.High school diploma or equivalent required; technical training, trade school coursework, or relevant quality/manufacturing certifications are preferred and may substitute for formal education based on experience. Perform complex dimensional, mechanical, and documentation inspections with minimal supervision. Develop, update, and maintain inspection documentation including control plans, technical data packages, and customer-required forms. Submit first article reports (AS9102), control plans, and supporting data to customers as required. Review drawings, specifications, and customer requirements to determine proper inspection methods. Ensure products and all associated documentation meet defined requirements per customer specifications and the Delva quality system. Review and verify outside processing documentation, material certifications, and supplier compliance records. Identify quality issues, investigate root causes at the inspection level, and communicate findings promptly. Assist in implementing and monitoring quality standards, parameters, and inspection criteria. Support process troubleshooting and collaborate with cross-functional teams on problem resolution. Record inspection results, maintain traceability, and ensure compliance with AS9100/ISO documentation standards. Train junior technicians and production operators on inspection procedures, documentation, and quality expectations. Participate in continuous improvement initiatives, including scrap reduction, takt-time improvement, and bottleneck support. Assist with special projects, audits, and customer support activities as assigned. Quality Technician III7+ years' experience in a manufacturing or production environment, preferably within CNC machining, aerospace, defense, or precision manufacturing.High school diploma or equivalent required; technical training, trade school coursework, or relevant quality/manufacturing certifications are preferred and may substitute for formal education based on experience. Lead complex inspections, including advanced dimensional verification, GD&T interpretation, and multi-step documentation reviews. Develop, implement, and improve quality processes to ensure products meet all specifications for quality, function, and reliability. Create, manage, and deliver comprehensive technical data packages, first article reports, and customer-required quality documentation. Establish and refine product-specific quality standards, acceptance criteria, and inspection parameters. Conduct detailed document reviews of drawings, materials, and external process certifications to ensure full compliance. Act as a quality liaison to customers, engineering, outside processors, and production teams for technical quality issues. Drive root cause investigations, corrective action development, and long-term quality improvement strategies. Lead training efforts for operators, supervisors, and lower-level technicians on updated inspection methods or process modifications. Support and lead efforts to reduce scrap, improve process stability, and enhance throughput in quality bottleneck areas. Provide guidance during audits and customer reviews; ensure all required documentation is accurate, complete, and available. Use advanced quality tools, measurement equipment, and software (CAD, FAI/AS9102 tools, databases). Maintain expert-level understanding of AS9100/ISO, quality assurance methods, and industry requirements. Assist Quality Manager with reporting, metrics, and strategic quality initiatives. Perform other advanced or leadership-level duties as needed. Benefits and Perks Our comprehensive benefits package includes, but is not limited to, a competitive pay rate, accrued vacation time, sick time, paid holidays, 401(k) with company match, health, dental, and vision insurance as well as Short-Term Disability, Long-Term Disability, and life/AD&D insurance. We are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate. Powered by JazzHR lX14NZcm8H

**Technician, Quality Control** **Princeton NJ, US** **On-Site** The QC Technician is responsible for maintaining conducting analyses, results entry and reporting and processing of quality related deviations, to ensure products meet specified standards defined, to help ensure that the products manufactured are safe, reliable, and meet both internal and external requirements, promoting customer satisfaction and trust in the business. **Your key responsibilities** + Perform Lab Tests: Independently carry out routine quality control analyses following set procedures. + Data Integrity & Documentation: : Confidently handle all steps of testing, including preparation, execution, and accurate documentation. + Check Results: Review test results for accuracy and consistency before submission. + Initial OOS Testing: Conduct first-level tests for out-of-spec results as per procedures. + Escalate Issues: Identify recurring problems and escalate them to the appropriate person or team. + Maintain Equipment: Take care of assigned lab equipment, including calibration and basic maintenance, following GMP and safety standards. **We bring** + Empowerment to make meaningful contributions while upholding ethical standards. + Recognition and celebration of your efforts and accomplishments. + Opportunities for growth and advancement for those who embrace innovation and take initiative. + Collaboration with experts in health, nutrition, and beauty to drive progress. + Customer-first approach, working with world-renowned brands to turn ideas into impactful solutions. + Opportunity to build a career making a significant impact on billions of lives, with the freedom to shape your own path. + Dedication to creating better futures for customers, communities, people, and the planet. + Responsibility and accountability in living company values and driving sustainable solutions. + Supportive environment where individuals are empowered to progress and contribute to meaningful change. **You bring** + Education: Bachelor's degree in Science, or a related field preferred. + Experience: Minimum of 2 years of experience in quality control. + Fluency in local language a requirement, other languages encouraged. The salary provided reflects the pay range dsm-firmenich expects to pay the successful candidate for the position. Individual pay offered will be based on the applicant's job-related skills, experience, relevant education, or training, and primary work location. $47,000 - $68,000 In addition to base salary, we also offer a comprehensive total rewards package, inclusive of annual incentive pay, a retirement savings plan, health care coverage, paid time off, recognition programs and a broad range of other benefits. All benefits and incentives are subject to eligibility requirements. **About dsm-firmenich** At dsm-firmenich, we don't just meet expectations - we go beyond them. Join our global team powered by science, creativity, and a shared purpose: to bring progress to life. From elevating health to making fortified food and sustainable skincare, the impact of your work here will be felt by millions - every single day. Whether it's fragrance that helps you focus, alternative meat that's better for the planet, or reducing sugar without losing flavor, this is where you help shape the future of nutrition, health, and beauty for everyone, everywhere. And while you're making a difference, we'll make sure you're growing too. With learning that never stops, a culture that lifts you up and the freedom to move across businesses, teams, and borders. Your voice matters here. And your ideas? They're essential to our future. Because real progress only happens when we **go beyond, together** . **Inclusion, belonging and equal opportunity statement** At dsm-firmenich, we believe being a force for good starts with the way we treat each other. When people feel supported, included, and free to be themselves, they do their best work - and that's exactly the kind of culture we're building. A place where opportunity is truly equal, authenticity is celebrated, and everyone has the chance to grow, contribute, and feel they belong. We're proud to be an equal opportunity employer, and we're serious about making our hiring process as fair and inclusive as possible. From inclusive language and diverse interview panels to thoughtful sourcing, we're committed to reflecting the world we serve. We welcome candidates from all backgrounds - no matter your gender, ethnicity, sexual orientation, or anything else that makes you, you. And if you have a disability or need any support through the application process, we're here to help - just let us know what you need, and we'll do everything we can to make it work. **Agency statement** _We're managing this search directly at dsm-firmenich. If you're applying as an individual, we'd love to hear from you. We're not accepting agency submissions or proposals involving fees or commissions for this role._

The Quality Technician in microbiology aseptic processes ensures products meet microbiological standards and are manufactured in a sterile environment. This role monitors quality assurance standards and encourages the team to consistently deliver excellent results. The Quality Technician is responsible for executing best practices, goals, and established standards for the team. Primary Responsibilities * Perform tests to identify harmful microorganisms, maintain a sterile environment, and ensure regulatory compliance * Document and analyze test results following good laboratory practices for microbiology and quality control laboratories * Identify and address production issues, contributing to corrective action * Inspect work daily, maintain cleanliness, organize supplies, and assemble sterile products using aseptic technique * Handle biohazard spills, train new hires, and demonstrate the use of cleaning chemicals * Uphold quality standards, follow GFSI, HACCP, and GMP guidelines, and participate in food safety inspections * Support sanitation operations, monitor performance, and provide report * Address customer complaints, conduct audits, and contribute to quality assurance improvements * Promote continual improvement and collaborate on cross-functional projects * Perform routine environmental monitoring within cleanrooms and production areas to detect microbial contamination * Conduct microbiological assays on raw materials, in-process samples, and finished products using various techniques * Accurately record and interpret test results, maintaining detailed documentation of activities, including deviations, investigations, and corrective actions * Participate in investigations for out-of-specification (OOS) results, deviations, and complaints related to microbiology testing * Ensure proper calibration and maintenance of laboratory equipment used for microbiological analysis and QC testing Prior Knowledge/Experience * Bachelor's Degree in Microbiology, Biology, or related field * 1-3 years of experience in quality; food processing experience preferred * Strong understanding of aseptic techniques and microbiology principles * Experience with various microbiological testing methods, including plate counting, membrane filtration, and rapid microbial detection * Proficiency in data analysis, documentation, and recordkeeping * Excellent attention to detail; ability to work independently and in team environments * Familiarity with GMP regulations and quality systems * Ability to utilize provided PPE - safety glasses, ear plugs/muffs, bump caps, dust masks, company uniform, safety shoes * Ability to be respirator certified if required * Physical ability to sit, stand, walk, climb, stoop for up to 8 hours; lift 55 lbs consistently; lift/hold objects overhead for extended periods * Ability to climb and work on a 40-foot extension ladder for extended periods as needed; work at heights up to 50 feet * Ability to maneuver and work in confined areas with variations in temperature, humidity, and air quality The following common allergens are processed in our facilities: wheat, eggs, dairy, and soy. Looking for a Career for Good? We offer a competitive compensation and benefit package, designed to promote a Happier, Healthier You which includes: Compensation: * Compensation for this role is hourly and will be based on your experience, skills, and location, with a typical range between $24.69/HR and $30.87/HR. * This role is eligible for a targeted annual bonus equal to $3500. Final bonus payouts are determined by both individual and company performance. Benefits: * Medical coverage starts the first of the month-no waiting period * Immediate 401(k) eligibility with fully vested matching contributions * Over 5 weeks of paid time off in your first year * Free life coaching, onsite health exams, and 24/7 access to Registered Nurses * Lifestyle Spending Account #LI-DNI Apply now * Apply Now * Start applying with LinkedIn

Job Description Are you ready to join our team at C&L Auto Body, an esteemed family-owned MSO in Plainfield, NJ? We are in search of a talented and devoted Quality Control Technician to uphold our dedication to business expansion and client contentment. Your precision and proficiency will be pivotal in reducing customer inconvenience following accidents. This position is a great jumping-off point for higher-paying jobs such as estimating & production management. Compensation: $18 - $30 hourly Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Assure that C&L QC procedures are being followed by all departments Solely responsible for final quality inspections Assure that all repairs to the vehicle match the final invoice Perform other related duties as assigned to ensure an efficient and effective repair Meet & greet customers Review repairs of all vehicles & sign off on ready-for-delivery Deliver vehicles to customers, reviewing repairs & answering any questions Perform ADAS on all vehicles that need scanning or calibrations fill out appropriate paperwork & check in requirements for each vehicle Qualifications: The ideal candidate should have the following experience: Experience working in a Team Environment Prior working knowledge of body repairs and parts Prior experience in multi-tasking, prioritizing, and organizing Ability to effectively communicate Technical knowledge for automotives Ability to learn & adapt quickly customer service experience Quality control experience About Company C&L Autobody is a regional Multiple-Shop Organization (MSO) with 11 body shops throughout Morris, Essex, Sussex, Warren, Union, and Middlesex counties in Northern NJ. We also manage one of the largest towing fleets in the state. As one of NJ's largest family-owned MSOs, we pride ourselves on delivering an unmatched level of customer service and craftsmanship for all your collision repair needs. We offer full benefits (medical, dental, and vision), paid time off, paid holidays, and a 401(k) with a company match. Work hours are Monday through Friday, 8 am to 5 pm, with occasional Saturdays.

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour

Introduction Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview If you're a QC expert when it comes to manufacturing, Immucor has an exciting opportunity for you! We are looking to hire a Quality Control Technologist III medical device, and/or the pharmaceutical industry. This critical role will Lead QC stability projects, perform Incoming, In-process, final release and stability testing in the Quality Control Laboratory. Act as Team Lead in the QC lab to assist supervisor and Director in daily operations of the Quality Control Laboratory and provide guidance to the QC staff. This position is not eligible for sponsorship for work authorization by Immucor, Inc. Therefore, if you will require sponsorship from us for work authorization now or in the future, we cannot consider your application at this time . Responsibilities Job Summary This role will be the team SME (subject matter expert) on product stability. This will include writing stability protocols and reports, performing product testing, and trending stability data. They may lead QC projects, perform Incoming, In-process, final release, and stability testing in the Quality Control Laboratory. They will be a Team Lead in the QC lab to assist the supervisor/ manger and Director in daily operations of the Quality Control Laboratory and provide guidance to the QC staff. Key Accountabilities Monitors stability testing time points, ensures samples are pulled and tested at the correct intervals, and performs data analysis to support QA/QC management. Drafts stability protocols and reports. Performs trend analysis onstability data throughout the stabiity protocol timeline. Develops timeline for annual stability and determines which products are required. Provides direction and guidance to Quality Control staff in the performance of daily tasks. Creates daily and weekly scheduling of all QC related activities Performs and schedules testing for incoming raw material, in-process, final release and inspection of BioArray products according to approved Standard Operating Procedures (SOP's) and other applicable documents within defined timeframes. Performs and schedules stability, method validations, equipment validations, threshold analysis process and other special testing. Act as OJT trainer to train new employees and current employees on new test methods. Guides QC technicians training activities and ensures that the appropriate training records are completed as per the role functions Reports and escalates out-of-specification results and deviations to the department supervisor/manager. Assists and leads the investigations, root cause analyses, and reports for out-of-specification results and deviations. Writes/Revises SOPs, WI, QC Specification/testing documents. Maintains accurate, legible, and complete records according to Current Good Manufacturing Procedures (cGMP's). Performs all assigned tasks following applicable laboratory SOPs, OSHA regulations and cGMP regulations (i.e. Blood borne pathogens and chemical hazards). Maintains work area, equipment, department, and all storage areas in a clean, neat, and orderly manner. Performs, schedules and delegates equipment calibration and manintenance. Qualifications Bachelor's degree in biology or chemistry or related field. Four (4) or more years experience in a medical device or pharmaceutical GMP quality laboratory. Experience working under 21 CFR Part 210/211 and/or 820 regulations required. Knowledge of ISO 13485 desired. Two (2) or more years of experience performing stability testing required. Experience writing stability protocols, performing data trending, and writing stability reports preferred. Eperience performing OOS Phase I investigations, in alignment with FDA guidelines, required. Expereince training QC technicians desired. Expereience performing PCR (Polymerase chain reaction) desired. Management has the discretion of substituting relevant work experience for a degree and/or making exceptions to the years of experience requirement. Quality Control Technologist III-Stability Closing If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact ****************************** for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. **************

Quality Control Technician Industry Leading Benefits: Medical, Prescription, Dental, Vision, 401K, Pension, Short and Long Term Disability, Life Insurance, Tuition Reimbursement, Overtime as needed. As a Silvi Materials Quality Control Technician, one is responsible for ensuring that concrete chemistry and construction projects comply with plans and specifications. This position includes industry testing of concrete consistency, air, water, color, and chemical content. The qualified candidate will be able to communicate with and interact with construction personnel, inspectors, plant managers, and drivers concerning the concrete materials used on a particular job. Silvi Materials has been expanding our “A” Team of employees since 1947! Our team has grown to 15+ companies, employing over 850 people across 30+ locations in Southeastern Pennsylvania, New Jersey, and North Carolina. Silvi is large enough to provide the stability you need, but small enough that you can feel your individual contribution to our success. We value the fresh ideas and perspectives of each new member of our team. What does Silvi Materials offer you, you may ask? Phenomenal Benefits: Medical, Vision, Dental, Prescription, Vacation, Paid Holidays, and so much more! Your future in mind: With 401(k) (at select locations) and/or pension options. We want all employees to build a great retirement! Growth at Silvi Materials: We offer each employee the opportunity to move into any facet of our complex business. And our tuition reimbursement program is the perfect springboard to help you get there! So, what does a Silvi Materials Quality Control Technician do? You'll be an integral part of our Quality Control/Technical Services Team! Arrives at the plant or job site prior to the first concrete delivery. Performs the initial and ongoing testing of aggregate and concrete for gradation, moisture, slump, air content, and temperature After evaluation of the above factors, maintains contact with plant operations and/or QC, to ensure that necessary adjustments (if required) to the mixture are made. When the concrete comes to the job site places some of the batch in cylinders. In the lab, performs tests that measure the compressive strength of concrete cylinders. Compares that value to the design value to ensure compliance with specifications. Communicates information to the appropriate individuals/agencies. Directly handles concrete during various testing. Qualifications Required: Industry experience is preferred but not required. Some college or further education is preferred but not required. Travel with their own vehicle to and from various plants and client locations. Mileage and tolls will be reimbursed. Valid Driver's license. Work a wide variety of hours and be able to work a flexible schedule as per company and client needs. Is able to work overtime hours. Works Saturdays and night pours as required. Understand the various components that make up the product and how they interact with one another. Understand how to troubleshoot the various problems that occur with the product and how to correct them. Understand the proper techniques for testing concrete. Preferably is ACI Level 1 certified, or willing to undergo paid training and testing to obtain the certification. Has a valid driver's license and is willing to undergo an MVR check. Willing to work outdoors, in all weather, to handle the concrete testing on site. Lift up to 100 lbs of liquid concrete using a wheelbarrow. Physical Requirements In a typical work setting, people in this job: Lift 50 pounds regularly and up to 100 pounds on occasion. Use one or two hands to grasp, move, or assemble objects Stand for long periods of time. Kneel, stoop, crouch, bend, stretch, twist or crawl. Hear sounds and recognize the difference between them. See details of objects that are less than a few feet away. See differences between colors, shades, and brightness. Silvi Materials does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factors.

Date 05/2025 Title Technician, QC Analytical Department Quality Control Reports to Manager, Chemistry Laboratory FLSA (Exempt or Non-Exempt Non-Exempt We are seeking a detail-oriented and skilled Laboratory Technician to join our Chemistry Lab division. The successful candidate will support physical and chemical testing of raw materials, R&D, Method development / Stability and finished products using various analytical instruments / Equipment's and techniques to ensure compliance with internal specifications. Areas of Responsibility Prepare samples, Mobile Phase, Buffer solution, Dissolution Media, Sample digestion etc. for analysis according to standard operating procedures (SOPs) or as per suitable method provided by senior management. Perform chemical analyses using techniques such as UV-Vis, Dissolution, FTIR, titration, Microwave Digestion system, TOC water sample and physical testing using apparatus and equipment's' such as Disintegration, Bulk Density, Tap Density, Loss on Drying, Karl Fisher, etc. Accurately record, and report test results in compliance with GLP/GMP standards. Calibrate, maintain, and troubleshoot laboratory instruments and equipment. Example-pH meter, Weighing Balance, etc. Maintain a clean, organized, and safe work environment. Assist in the development and validation of analytical methods under supervision. Document laboratory activities and results in lab notebooks, Raw Datasheets, and on computer system with validated excel. Dispose of chemical waste properly and follow all environmental, health, and safety (EHS) protocols. Participate in quality audits and continuous improvement initiatives. Must be able to work extended hours as needed and occasional weekends. Other duties and responsibilities as assigned. Other Responsibilities Including Safety: Works in a safe and responsible manner to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: Associate's or Bachelor's degree in Chemistry, Biochemistry, or related scientific field. 0-3 years of hands-on experience in an analytical chemistry lab (academic or industrial). Strong understanding of laboratory safety and quality standards (e.g., GMP, GLP, ISO). Good problem-solving and organizational skills with attention to detail. Ability to work independently and collaboratively within a team. Certifications, Licenses, Credentials: N/A Skills & Ability Ability to maintain integrity and honesty at all times and to communicate with transparency. Ability to work independently or as part of a team. Solid understanding of cGMP's and GLP and is familiar with 21 CFR Part 11 Strong working knowledge of Microsoft Word, Excel. Good documentation practices and able to write simple, clear reports Meets commitments on time and practices time-management skills Seeks to identify continuous improvement needs Experience with Shimadzu LC2010, Nexera, GC2010, Thermo ICP-MS, Labsolution and Waters Empower Lab Software a plus. Physical Requirements (lifting, etc.): May execute 90%-100% of their work at the bench level either standing or sitting on a stool. Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances and leaning over equipment as well as kneeling on the floor to clean under the equipment. Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. On occasion may need to lift up to 35 lbs. Ability to navigate office, lab, and/or plant floor working environments. Work Environment (Office, Warehouse, temperature extremes, etc.): Approximately 80% of work performed in a laboratory environment which may have unpleasant odors or hazardous conditions. Temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Office Hours: 8:30 AM - 5:00 PM 9:00 AM - 5:30PM

Primary function is to deliver high quality patient care while producing diagnostic radiographs, and performing and/or assisting physicians in interventional/invasive procedures. Maintains records, films and paperwork. Prepares, maintains and operates radiologic and special procedure equipment in a safe and responsible manner, following appropriate radiation safety guidelines. Education High School Diploma or Equivalent Required Non Degree Program Graduate from a two-year AMA approved radiologic technology program Required Experience General Experience in special studies and angiography Required Licenses Reg Technologist (R) Required Basic Life Support Required '396456

Level One: At the direction of the Quality manager, level one quality technicians train to develop the ability to use predetermined methods, operations, setups, and prescribed specifications to perform in-process and completed inspection of products such as machined parts, mechanical assemblies, processed parts and purchased standard hardware. They also perform verifications of part identification and configurations. Level one quality technicians will arrange inspection queues to identify priority work. In addition, they will identify and segregate non-conforming product using basic knowledge and understanding of Geometric Dimension and Tolerancing methods per ASME 14.5, and common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gages, radius gages, protractors, profilometers, bore gauges, and dial indicators as necessary to complete assignments. Level one quality technicians will demonstrate blueprint reading and basic math skills, basic PC skills, including Microsoft Office and the ability to use MRP or ERP systems after instruction. Primary Duties & Responsibilities: Visually observe dimensional and functional characteristics of the product in final form. Perform first part on startup. Evaluate product manufacturing. Review all certifications for incoming material received. Perform in-process inspection of product during manufacturing and final inspection with use of optical comparators, thread gages, height gauges, calipers, micrometers and profilometer. Reconcile final inspection documentation for shipments. Perform all other duties as assigned. Required Skills: Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements. Effective oral and written communication skills. Ability to keep accurate records. Detail oriented and quick learning ability. Ability to follow documented procedures and standards. Excellent time-management skills with the ability to work independently with little supervision. Experience & Education 0-1 years of recent and relevant work experience or training High School Diploma or GED Some Engineering or technical training/background strongly preferred. Proficiency with general computer usage Familiarity with precision measurement tools (calipers, micrometers, etc.) preferred. Working Conditions/Physical Requirements: N-Never, O-Occasionally (80%) Exposure to Adverse Working Conditions: · Noise, Noxious Orders, Temperatures F · Hazardous Materials O Physical Conditions: · Close Eye Work (computers, typing, reading, writing) F · Sedentary (continuous sitting) O · Light Work (standing, walking, lifting C · Moderate Work (lifting 15-30 pounds, prolonged use of small hand instruments or tools) F · Moderately Heavy Work (lifting, moving, loading up to 35 pounds) O · Heavy/Hard Work (above average strength & stamina) O Travel Requirements: · None

Job Description The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

An independent, family-owned business in Philadelphia, I. Rice & Co. has been making quality food products and flavors since 1884. With considerable growth and expansion, we are looking for qualified employees to help in a variety of positions. As a food manufacturing plant, I. Rice & Co. offers a diverse range of employment opportunities, from production coordination to warehouse stocking and inventory organization. With a passionate community, competitive pay, and generous bonus incentives, I. Rice offers ample opportunity for personal and professional growth. QUALITY CONTROL SENIOR LAB TECHNICIAN This permanent, full-time position supports the Quality Assurance department. The Senior Lab Technician plays a critical role in maintaining and enhancing our commitment to food safety and quality. This hands-on position combines technical expertise with leadership, performing daily functions in the lab, while also supporting the Director of Quality Assurance with administering department operations, validating program CCPs, and participating in audits. Knowledge of laboratory principles is required. Product testing includes brix, pH, water activity, titrations, viscosities and organoleptic evaluations. Environment is a clean and modern lab working with terrific people. Essential Job and Duties - Perform analytical tests on raw materials and finished products - Maintain extensive record keeping - Assist with auditing and maintaining SQF, GMP, & HACCP programs at the plant - Calibrate laboratory equipment - Participate in company audits - Work with production to make adjustments to batches in order to adhere to product specifications - Run batch freezer to make finished product for further study and sensory evaluation - Measure and verify raw materials needed for batching - Respond to customer questions or concerns in a professional and appropriate manner - Inspection of inbound receipts - Maintain the finished goods retention library - Sample finished product for microbial analysis - Maintain raw material specification documentation and product specification documentation - Maintain finished product specification documentation This position is supported by a team of technicians performing similar tasks. Our products, equipment, and methods are continually evolving. The duties associated with this position will change and evolve as needed. This individual is required to be willing and able to take on new responsibilities as needed. Education and Experience - Bachelor's Degree in Food Science, R&D, or related course of study preferred - 5 years of related quality assurance or lab experience - Experience with FDA, USDA, GFSI, SQF, FSMA, GMP, GLP, HACCP preferred Skills and Expectations - Ability to prioritize and organize ones work load - Ability to work in a team environment as well as individually in an environment with changing priorities - Comfortable working on an active busy production floor among batching and packaging equipment. - Ability to manage time effectively - Maintain proper lab conditions and equipment maintenance - Maintain proper record keeping and perform data entry - Be capable of working in various work settings of the facility including laboratory, office and plant areas - Perform basic math skills - Proficient computer skills, including above average knowledge of MS Excel - Understand and perform scaling/measuring in standard and metric formats - Food industry experience preferred. - Lifting and carrying up to 50 pounds - Being able to withstand extended periods of time on one's feet - Working and walking in a wet environment Benefits Benefits and Compensation - Weekly pay with direct deposit - Health insurance - Various supplemental insurance policies available after 90-day introductory period - Life insurance available after completion of 90-day introductory period - 401-K retirement plan available after one year of employment - Option to participate in uniform program - Annual bonus incentives I.Rice is an equal opportunity employer and derives our staff skills through a diverse and talented workforce. This person will work closely with all departments and persons in our facility and must conduct themselves professionally at all times.

Under the general direction of the Quality Control Manager, the Quality Control Inspector is responsible for the inspection of products with the objective of meeting quality initiatives in a diverse manufacturing environment. This is a full-time, on-site, non-exempt position. Essential Functions - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Document Receiving, First-Piece, In-Process and Final Inspections on AS9102 and similar reporting formats Roaming In-Process Inspections on the floor Visual inspections for general workmanship Manually balloon customer prints and create inspection reports, as needed Assist in calibration activities, as needed Prepare documentation packages, as needed Qualifications Experience/Education Able to read and understand blueprints with an emphasis of GD&T Able to use micrometers, dial indicators, optical comparators and height gages for inspecting dimensions as fine as .0002” Able to use attribute gages such as pins, thread gages Able to read and understand Military and other specifications. Have strong verbal and written communication skills Have a keen eye for detail CMM experience a plus Physical ability to stand for long periods Willingness to assist in all other duties as assigned

Piper Companies is seeking a QC Specialist - Microbiology to support a cutting-edge cell therapy organization in Branchburg, NJ. This individual will perform microbiological testing in a cGMP laboratory environment, supporting manufacturing and quality operations. Responsibilities of the QC Specialist - Microbiology: * Perform microbiological testing including BET (endotoxin), sterility testing, and rapid microbial methods * Support environmental monitoring (EM) activities as needed, including sampling and documentation * Execute testing in compliance with cGMP, SOPs, and regulatory requirements * Document test results, review data, and complete reports in accordance with cGMP standards * Assist with troubleshooting, investigations, and method validations/transfers * Draft, review, and update SOPs, protocols, and technical documentation * Maintain laboratory instruments and ensure proper calibration and cleanliness Qualifications of the QC Specialist - Microbiology: * 4+ years of experience in a cGMP microbiology or QC laboratory * Hands-on experience with BET (endotoxin), sterility testing, and rapid microbial testing * Exposure to or experience supporting environmental monitoring (EM) programs * Strong understanding of aseptic technique and contamination control * B.S. or M.S. in Microbiology, Biology, Biotechnology, or a related scientific discipline Compensation for the QC Specialist - Microbiology: * Pay Rate: $40-45/hr. * Contract Opportunity * Comprehensive Benefits: Medical, Dental, Vision, 401K, PTO, Sick Leave (as required by law), and Paid Holidays Application Period: This position opens for applications on 1/16/2026 and will remain open for a minimum of 30 days from the posting date. Keywords: QC Specialist, Microbiology, cGMP, BET, Endotoxin, Sterility Testing, Rapid Microbial Testing, Environmental Monitoring, EM, Cell Therapy, Biotechnology #LI-JM1 #LI-ONSITE