Quality control technician jobs in Hillsboro, OR - 248 jobs

Requirements JOB RESPONSIBILITIES: To include but not limited to the following: Develop, validate, and optimize CMM programs to support NPI parts, ensuring compliance with customer drawings, GD&T, and process of record requirements. Partner with Engineering, Quality, and Production to establish robust inspection strategies that mitigate risk in early-stage builds. Troubleshoot and resolve dimensional inspection challenges, ensuring on-time delivery of inspection data. Design and deliver structured training for CMM operators and inspectors, including onboarding for new hires and upskilling for current staff. Update and manage a CMM Operator Evaluation Template to measure technical proficiency, productivity, and quality of output against defined standards. Conduct skill gap assessments and implement targeted development plans for individuals and teams. Lead the creation and deployment of the Ascentec Engineering CMM Training Manual, stored within company systems, to serve as the standard for all sites. Standardize CMM programming methods, inspection workflows, and reporting formats across facilities. Implement inspection KPIs (e.g., first-pass yield, programming cycle time, inspection backlog, repeatability/reproducibility metrics) and drive performance improvement. Ensure calibration schedules, probe qualification, and maintenance plans are adhered to for all metrology equipment. Evaluate and recommend emerging inspection technologies, automation, and software enhancements to improve accuracy, throughput, and efficiency. Benchmark Ascentec's metrology capabilities against industry leaders and develop plans to close gaps. Operates dedicated metrology equipment. Proofs CMM programs out while making any necessary changes and runs preexisting programs Performs other duties as assigned. MINIMUM REQUIREMENTS: Education/Certifications High School Diploma or equivalent CORE COMPETENCIES: Advanced CMM Programming & Optimization - Expert in developing, validating, and refining complex CMM programs to meet GD&T and customer drawing specifications, especially for new product introduction (NPI) parts. Inspection Strategy Development - Collaborates cross-functionally with Engineering, Quality, and Production to establish robust, risk-mitigating inspection strategies during early-stage builds. Technical Troubleshooting & Problem-Solving - Capable of diagnosing and resolving complex dimensional inspection challenges to ensure timely and accurate reporting of critical quality data. Training Program Design & Delivery - Designs and delivers structured onboarding and upskilling programs for CMM operators and inspectors; mentors team members and supports long-term skill development. Performance Evaluation & Skill Assessment - Develops and maintains tools (e.g., Operator Evaluation Templates) to assess technical proficiency and drive targeted performance improvements. Documentation & Standardization Leadership - Leads creation of standardized CMM manuals, work instructions, and best practices libraries to ensure consistency across sites and teams. Cross-Site Process Standardization - Champions uniformity in CMM programming techniques, inspection workflows, and reporting formats across company facilities. Continuous Improvement & KPI Management - Implements and tracks key inspection metrics (e.g., first-pass yield, cycle times, repeatability) to drive performance, quality, and throughput improvements. Calibration & Equipment Readiness - Oversees metrology equipment calibration, probe qualification, and maintenance schedules to maintain compliance and measurement accuracy. Technology Evaluation & Innovation - Researches and recommends emerging inspection technologies, automation solutions, and software tools to enhance inspection capability and scalability. Industry Benchmarking & Capability Growth - Benchmarks internal metrology systems against industry best practices and drives strategic improvements to maintain competitive edge. Communication & Collaboration - Effectively communicates across departments and levels, providing technical leadership while aligning quality objectives with production and engineering goals. Systems & Documentation Management - Maintains high standards in digital documentation, version control, and system-based storage for training, work instructions, and inspection protocols. COMPENSATION/BENEFITS: $34 to $50 per hour DOE Medical / Dental / Vision 401k with company match up to 4% Tiered Quarterly Bonus Program Short-term and Long-term Disability Tuition Assistance or Reimbursement Life Insurance Paid time off / paid holidays Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $34 to $50 per hour

Strong History. New Vision. Yellowstone Local is proud to represent Fought and Company, an industry leader in structural steel fabrication. You're a seasoned Quality Control Technician who takes pride in doing things by the book, and making sure everyone else does too. You're not here to babysit sloppy work. You're here to protect the integrity of every weld and structure that leaves the shop. What's in it for You? Competitive pay: $70,000-$90,000 annually, based on experience and certifications Full-time schedule: 4x10s, Monday-Thursday Overtime paid at time and a half, frequently available on Fridays and Saturdays, with occasional Sundays Medical, dental, and vision insurance 401(k) and pension plan Free prescription safety glasses Yearly performance bonus based on company performance On-site work in Tigard, OR, minimal travel required Why You'll Love It Here Safety is the top priority. This team lives and breathes a safety-first mindset You'll work for a legacy company with a bold new vision We're building a world-class QC team to take control in-house and raise the industry standard Your standards matter. We don't cut corners, ever Your voice counts. We want proactive problem solvers, not silent box-checkers You'll inspect structural components and bridge parts that shape the infrastructure of the Pacific Northwest Your New Role Perform magnetic particle testing (MT) and ultrasonic testing (UT) to Level II standards Inspect bridge and structural components using AWS D1.1, D1.5, and D1.8 codes Maintain detailed and accurate inspection and testing records Execute assigned tasks from the QC Supervisor and QC Manager Collaborate with fabrication teams to solve quality issues in real time Support AISC certification standards and ensure all work meets or exceeds specs Based in Tigard, Oregon Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. AWS Certified Welding Inspector (CWI) Level II certification in Magnetic Particle Testing (MT) Level II certification in Ultrasonic Testing (UT) 3 to 5 years of quality control or inspection experience Experience with AWS D1.1 Structural, D1.5 Bridge, and D1.8 Seismic standards Detail-oriented with strong communication and reporting skills High school diploma or equivalent Must be able to work full-time onsite in Tigard, OR with availability for overtime Fought and Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status.

Description Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). About the Role nLIGHT is seeking a Quality Technician to join our quality team located in Camas, Washington. This role supports the quality needs of the fiber laser manufacturing line and will manage disposition of non-conforming parts. This position will also manage the calibration program and coordinate the quarterly calibration events. Shift: Monday - Friday 8:00AM to 5:00PM, plus overtime as necessary Roles and Responsibilities Performs inspection on equipment such as regular preventative maintenance and Calibration. Provides trouble shooting to the equipment issues. Maintains and updates other metrology tools Maintains the IQA labs for cleanroom, safety, 5S, ESD etc. standards Completes First Article Inspection Reports for manufactured and purchased items (FAIR). Manages to reduce non-conforming material (NCM) through timely disposition, transactions, and reporting. Performs incoming inspection and product in-line inspection per documented requirements Generates incoming inspection documentation. Leads the cycle count in the IQA teams Updates and assists with managing the IQA Master Log and IQA records. Qualifications 3+ years of experience as a Quality Inspector, or Manufacturing/Process Technician, or as Senior Quality Inspector. ERP system transactions knowledge is required. Ability to read and interpret Engineering Drawings. Experience with measurement of precision mechanical and optical components/assemblies, using micrometers, calipers, go/no-go gauges, microscopes, optical comparators, etc. preferred. Experience with inspection of components for laser diode assemblies and fiber optics preferred. Proficient in the use of MS Office programs such as Excel, Word, etc. Ability to work with minimal supervision. Local travel may be needed for up to 15% of the time. nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting pay depends on qualifications: Quality Technician I- $22.37 to $28.00 Quality Technician II - $23.93 to $31.10 per hour Senior Quality Technician III - $26.00 to $33.80 per hour Shift differentials are paid at the rate of 10% for hours worked between 5:30PM and 12:00AM and at 15% for hours worked between 12:00AM and 5:30AM Target Cash Bonus with potential payout of up to 2% of earned wages 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays Eligible for health benefits on the 1st day of the month after your start date Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance Employee Assistance Program Aflac Supplemental Insurance Flexible Spending and Health Savings Accounts Employee Stock Purchase Plan 401(k) with company match and immediate vesting Jury Duty and Bereavement Leave Pay Tuition Assistance Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or [email protected]. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: E-Verify Participation Poster Right to Work Poster

Ascentec Engineering LLC is hiring! Do you have impeccable attention to detail skills? Do you want to be the last person that reviews our products before they are shipped to our world-class customers? We are looking for CMM Quality Technician III's that provide an essential function in ensuring that only the highest quality products are delivered to our customers. We pride ourselves on investing in our employees and helping them carve their own paths to success. We show our appreciation with company barbecues, Taco Tuesdays, and our annual May the 4th celebration (date Ascentec was founded), complete with Stormtroopers! Please note that preference will be given to candidates that have experience working in a manufacturing setting, but this is not required. Shifts available: Day Shift : Monday through Friday, 8 a.m. to 4:30 p.m.; and Swing Shift : Monday through Friday, 3:30 p.m. to 12 p.m. You will earn an industry-leading hourly shift differential for swing shift. Please note that this position is onsite (not remote/not hybrid) and not eligible for Visa sponsorship. Requirements JOB RESPONSIBILITIES: To include but not limited to the following: · Proofing CMM programs out and making any changes necessary. Running preexisting programs. · QA technician and final inspector for custom composite tools/fixtures - EMS Division · QA technician and final inspector for precision CNC machined parts - Machining Division · Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. · Key contributor and participant - Quality Management System (ISO 9001:2008) design and implementation · Focal point for QA data management with in the Quality Tracking Database Software - Unipoint · Manual lay out of parts on the granite. Checking flatness, perpendicularity, parallelism etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: · Extremely detail oriented and focused on helping to maintain consistent quality standards · Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T · Strong communication skills and able to work as a team member when parts/assemblies are determined to be out of tolerance during final inspection · Experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. required · Experience with manual and/or automated CMM preferred (including formatting of CMM reports) · Experience working within an ISO 9001 registered organization is required · Able to work overtime and limited Saturday shifts as needed · Preference will be given to candidates with prior machinist experience · CQI or CQT preferred. · Strong working knowledge of Zeiss CMM's with Calypso software PERSONAL QUALIFICATIONS: · Strong decision-making skills · Self-Starter / Self-Motivated · Reliable and Dependable · Positive Attitude · Enjoys fast pace and rapidly changing environment · Honest with Stellar Integrity · Professional Demeanor and Respectful to people in all situations · Team Player COMPENSATION/BENEFITS: · $27 to $42 per hour DOE · Medical / Dental / Vision · 401k with company match up to 4% · Tiered Quarterly Bonus Program · Short-term and Long-term Disability · Tuition Assistance or Reimbursement · Life Insurance · Paid time off / paid holidays · Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $27 to $42 per hour DOE

Paradigm in searching for a Quality Control Technician to play a key role in supporting manufacturing operations by performing quality inspections to ensure products meet required standards and specifications. Type: 6 -month contract to hire Location: On -site, Hillsboro, OR Benefits: Medical, dental, vision, life, 401K, PTO, and sick leave As a Quality Control Technician, you will: Follow the weekly production and shipping schedule as directed by the supervisor or team lead Verify all required documentation is received before beginning work Review and interpret assembly drawings, Bills of Materials (BOMs), and work instructions Inspect SMT and through -hole assemblies in accordance with IPC -610 Class II & III standards Operate and program Automatic Optical Inspection (AOI) and X -ray machines Conduct first article inspections Log inspection results and quality data into the company database Identify and communicate documentation discrepancies Requirements Our skills and experience wish list includes: High school diploma or GED; college coursework preferred Experience in manufacturing or electronics required Familiarity with IPC -610 standards Experience operating and programming AOI and X -ray machines Ability to read blueprints and use basic measuring tools Strong attention to detail and communication skills Ability to identify electronic components and part numbers Familiarity with ISO 9000 processes and LEAN methodologies Basic computer skills; proficiency in MS Office (Word, Excel, PowerPoint) preferred BenefitsParadigm offers a competitive benefits package that includes medical, dental, vision, life, 401K, PTO, and sick days. About Us, Paradigm Want to love Mondays? It's possible when you love what you do. Paradigm is a staffing solutions firm dedicated to finding the perfect job for candidates. We're connected with some of the most innovative tech companies around, giving our employees that competitive edge needed in today's job market. Paradigm Information Services does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

The metal fabrication Quality Control Technician is responsible for verifying all fabricated metal parts meet established quality standards. The technician will work closely with the Quality Engineer to complete inspections throughout the production process. This involves using measuring tools and techniques to identify defects, ensuring compliance with blueprints and specifications, and reporting any issues to production teams to maintain product quality and prevent further problems. Responsibilities + Inspect fabricated parts by visually and physically examining metal components at various stages of production, such as raw materials, cut pieces, welded joints, and finished products, to check for dimensional accuracy, surface defects, and compliance with design specifications. + Utilize measuring tools such as tape measures, levels, calipers, micrometers, gauges, and other measuring instruments to ensure tolerances are met. + Read blueprints and specifications to thoroughly understand engineering drawings and technical specifications and verify that each fabricated part adheres to the intended design. + Identify potential quality issues such as misalignment, warping, scratches, dents, improper welding, and other imperfections during inspection. + Document inspection findings on quality control forms, noting any non-conforming parts and documenting corrective actions taken. + Communicate with production teams by reporting identified issues to production personnel and providing feedback to improve manufacturing processes and prevent future quality problems. + Implement corrective actions by working with operators to address quality issues by adjusting machining parameters, re-working defective parts, or implementing process improvements. + Maintain quality standards by ensuring adherence to established quality control procedures and industry standards, including safety regulations. Essential Skills + Strong understanding of metal fabrication processes, including cutting, welding, and bending. + Proficiency in reading and interpreting blueprints and technical drawings. + Attention to detail with the ability to check large quantities of documents to ensure they meet code specifications. + Expertise in using both standard and precision measuring tools, such as tape measures, levels, calipers, micrometers, and gauges. + Excellent communication and problem-solving skills. + Familiarity with quality control methodologies and documentation practices. + Proficiency in working with computers, including Word, Excel, Adobe, and Outlook. + Availability to work overtime as required, including some weekend work. Additional Skills & Qualifications + Interest in becoming a Certified Welding Inspector (CWI). + Ability to train and mentor others. Work Environment The role involves splitting time between the office and the shop floor, looking at parts, reviewing documentation specific to each build, and interacting with machine operators, welders, and inspectors. Flexible start and finish times for scheduling are offered, and the company supports obtaining a CWI certification if not already held. Upon conversion, 100% of medical benefits are paid for the employee and all family members, and the 401k employer contribution is based on profitability, not dropping below 15% in the past five years. #LI-MH3 Job Type & Location This is a Contract to Hire position based out of Portland, OR. Pay and Benefits The pay range for this position is $23.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portland,OR. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Mission:To plan, schedule and perform a wide variety of procedures, processes or inspections and experiments to test process, determine the material and physical properties of ceramics, waxes, metals, alloys and/or parts. To work with technical/production Technician IV's and Engineers to devise new methods and/or procedures and outline major projects. To provide solutions to complex problems in major area and carry out projects independently. Principal Accountabilities:1. Provides solutions to complex problems in major technical/production field by applying a wide variety of techniques, processes and procedures. Works independently with consultative input and periodic review by Technician IV's or Lab management. 2. Plans, schedules and completes small to medium sized projects. Determines procedures, schedules and manpower requirements. Coordinates activities with other Technicians. 3. Gathers, records, analyzes and summarizes data in various formats, prepares technical reports of results, evaluates projects, goals and processes. 4. Provides technical assistance and leadership to Technician's I & II. 5. Contacts and coordinates activities with other Technicians, Engineers and Production personnel, may act as liaison with vendors and/or customers on specific issues. 6. May be required to work with hazardous waste. 7. Other duties as assigned. Qualifications:1. 4-5 years prior relevant experience OR A. S. or A. A. degree and 2-3 years of specific relevant technical experience OR B. S. degree with 1-2 years of specific relevant experience OR equivalent training and experience. 2. Considerable knowledge of and familiarity with basic scientific principles and laboratory techniques and considerable theoretical knowledge of major field, awareness of relationship between major field and other disciplines. 3. Effective written and verbal communication skills. 4. Ability to apply a wide variety of technical procedures under general directions and to complete work independently. 5. Ability to plan, schedule, evaluate and coordinate designated projects. 6. May be required to complete Hazardous Waste Management training.

Job Description Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which may include manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 5 - 6 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A

Temp Food Production Quality Control Pay: Day Shift $23.60/hour (+ $2.50 night shift differential for hours worked between 5pm - 5am) Schedule: 3 - 4 day work weeks with set shifts 8pm - 8am Shift 4 - Thursday - Saturday every other Wednesday Night Shift Location: Mcminnville, OR GLISS General Labor & Industrial Staffing Solutions is hiring for Food Production Quality Control Technicians. In this role you are responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality control technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met. If you have QC/QA experience and looking for a temp-to hire position APPLY TODAY Responsibilities: Coach and train employees on GMP's. Enforce GMP's to maintain a quality product manufactured in a safe environment and meeting all targeted requirements. Maintain, and enforce company quality standards. Ensure plant operations staff delivers quality products within specification. Provide regular and timely feedback to production operations and Supervision as to critical process analytical measurements. Conduct routine testing and quality checks per schedule. Conduct allergen verification testing and gluten testing in accordance with certifying bodies and internal procedures. Assess product quality and accept or reject from processing. Ensure date codes are changed on containers to reflect proper identification of product being processed. The ability to work with individuals at all levels of the organization, including appropriate confrontation as needed when any individual or department is not compliant with quality expectations. Audit and analyze food contact equipment for cleanliness. Perform sanitation inspection of production workstations prior to startup, changeover or shift relief and communicate deficiencies to supervisor. Reject unsanitary production equipment. Calibrate or replace malfunctioning equipment. Properly and timely complete all shift documentation. Routine housekeeping of assigned workstation and adjacent areas. Manage any and all HOLDS from assigned shift and ensure product, material disposition is following Food Safety requirements. Perform required line checks. Examples are metal detection, weight checks, lot checks, etc. Inspect raw materials upon arrival, ensure proper paperwork accompanies the raw materials and pull raw material retains as required. Inspect packaging materials upon arrival, ensure proper paperwork accompanies the packaging material and pull packaging material retains as required. Communicate any non-conformance issues to the Quality Supervisor or Director of Quality. Ensure team members follow all appropriate SOPs, GMPs and safety requirements. Verify equipment is calibrated as required and documented accordingly. Provide proper paperwork to the operations and warehouse teams. Qualifications: Quality Control/Assurance experience in a manufacturing or food production facility 6 months+ Knowledge of HACCP with HACCP training Must work well in a team environment and have strong communication skills. Work independently, set priorities to meet deadlines, handle multiple tasks, and make decisions under pressure. Excellent analytical and problem-solving skills with heightened attention to detail Required: - Ability to commit to a 12-hour workday & standing/walking the entirety of the shift - Working overtime weekly & working weekend days - Speak, read & write fluent English as orientation is required and material available at this time is only in English - Ability to lift up to 50lbs - Resume & longevity of past jobs is important to this position BENEFITS OFFERED TO ELIGIBLE EMPLOYEES: Medical Insurance Dental Insurance Vision Insurance 401(k) retirement plan Referral bonuses HOW TO APPLY: 1. Online Application: Start the first part of your application online at WWW.GENERAL-LBR.COM 2. Call to Schedule: Once your application is complete, call us at ************ to schedule an interview. Applications are accepted by appointment only, Office Hours: Monday-Thursday, 8:00 AM-5:00 PM 3070 Lancaster Dr NE Salem, OR 97305

Quality Technician Department: Food Safety & Quality Assurance Supervisory Responsibilities: No Reports to: FSQA Manager Worker Category: Full-Time FLSA Classification: Non-exempt Bonus Eligibility: We Win Together Bonus Plan This seasonal position will support increased production needs through mid-August, with the possibility of continued work after that. Position Summary: The Quality Technician is responsible for verifying quality procedures on our production floor to ensure that all products meet our internal standards. This role helps monitor GMPs on the production floor and ensure that all personnel and processes adhere to proper Food Safety practices, addressing any quality deviations that may arise. In addition, the Quality Technician is responsible for performing routine checks on all packaging lines and reviewing and verifying all records completed by production and operations. The Quality team works closely with the production team and laboratory team to ensure the production of quality products in a timely fashion. Job Responsibilities: Provide guidance and recommendations to employees in production regarding GMPs, product specifications, and food safety practices. Train new hires in the FSQA Department on key tasks and job responsibilities. Monitor the production team's adherence to GMPs, product specifications, SOPs, SSOPs, and food safety. Address all GMP violations with both production management and team members. Conduct sampling and perform routine checks and testing on multiple packaging lines, including but not limited to verification of packaging lot codes, correct packaging components, package integrity, carbonation, and cap removal torque. Identify and implement corrective actions when production deviates from the Food Safety Plan and practices. Furnish accurate verbal and written reports and shift hand-downs to the quality department and plant management regarding product and process quality and consistency, process capabilities, and Food Safety. Identify and address GMP violations with quality management, production management, and team members. Assist Operations/Production with creating Standard Operating Procedures and Standard Work Instructions and adhering to processes. Review and verify all QA/QC records, including shipping & receiving, monitoring, cleaning, and all Process Control Documents. Function as internal auditor to monitor the plant for compliance with FSMA and 3rd-party regulations and review for compliance with GMPs performing inspections of the production floor as needed. Support quality management systems, including pest control, chemical verification, traceability, and others as determined by management. Identify and investigate non-conforming materials, place material on hold as needed and communicate with production on all holds and product disposition. Conduct a pre-shipment review of the finished product Assist with investigating customer complaints Obtain and maintain accurate records to determine the consistency of product quality, compliance with regulatory agency requirements, and documentation of the Food Safety Plan. Act as backup to the FSQA Document Coordinator for crucial food safety functions Qualifications & Experience: BS degree or coursework in related field is a plus (Food Science, Microbiology, Chemistry, Biology, or related discipline), or experience in Quality Assurance Intermediate MS Office or Google Platform experience Previous food manufacturing experience is a plus Physical Requirements: Ability to stand for long periods and move dynamically on the production floor Ability to sit continuously at a computer Carry weight, lift up to 5 pounds frequently and up to 50 pounds occasionally. Taste/Smell - ability to detect and perceive fermentation and tea flavors and aromas Ability to climb a ladder occasionally Work Environment: While performing the duties of this position, the worker may be exposed to inside environmental conditions, hot fluids, pressurized vessels and transfer lines, strong odors, chemicals, noise levels above 85 decibels, confined spaces, refrigerated gases, powered industrial trucks, and moving machinery. Other Duties: Please note this job description may not cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. In addition, duties, obligations, and activities may change at any time, with or without notice. Commitment to our BCorp Values: This position involves integrating sustainable practices and supporting initiatives that align with our B Corporation certification, ensuring we meet our commitment to social and environmental responsibility through every aspect of our work. Statement of Diversity, Equity, Inclusion & Belonging: Brew Dr. Kombucha is committed to maintaining a workplace where everyone feels respected, accepted, and valued. We strive to create an inclusive workplace that embraces different cultures, backgrounds, and perspectives. We will continuously review our company policies and hiring practices to foster a fair and equitable work culture. Brew Dr. Benefits: Comprehensive Medical and Dental Plans FSA, Dependent Care, Transit Plans Long-Term Disability Insurance 401(k) with 100% Vested Employer Match Educational and Wellness Reimbursements Employer-paid Short-Term Disability and Life/AD&D Insurance Company Holidays and Floating Holidays Paid Day off in your Birthday Month Local Love Paid Volunteer Program Charitable Donation Matching Paid Parental Leave

Job DescriptionQuality Technician IIRapidly Growing Renewable Energy Company Seattle Area/Relocation Assistance Available$26 per hour, with potential flexibility based on experience Terrific Quality Technician position with a rapidly growing renewable energy company. The position will ensure quality and compliance for products and services manufactured. Previous quality control experience in a fast paced production environment is essential for this role.Responsibilities: Ensure production lines adhere to and comply with legal requirements, standards, and procedures Provide training to productions teams to improve quality control and product excellence Review and interpret blueprints, drawings, and radiographs Perform testing on the production line and propose improvements Collect quality data and provide statistical analysis reports Monitor operations and suggest improvements to processes Qualifications: Prior experience in a fast paced production environment Manufacturing experience within a technical role, experience with PV module is preferred Strong problem solving skills Tech savvy Ability to work collaboratively in a team environment and also independently Equal opportunity employer

Temp Understand/interpret order sheets and product descriptions to ensure accuracy Coordinate various products to load on trailers (up to 20 trailers per day) Responsible for accurate counts and product quality Work in a team REQUIREMENTS Excellent math skills Excellent communication skills, must be able to read, write and comprehend information, reports, instruction and correspondence Excellent reasoning ability, be able to apply common sense and understand detailed or oral instructions, problem solving skills Forklift experience Be able to push, pull, bend, twist and grip heavy packaged product by hand as well as by forklift Positive attitude Pay starts at 10.60 1205 Prudential Blvd , Cowlitz, WA 98632, United States of America

Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). About the Role nLIGHT is seeking a Quality Technician to join our quality team located in Camas, Washington. This role supports the quality needs of the fiber laser manufacturing line and will manage disposition of non-conforming parts. This position will also manage the calibration program and coordinate the quarterly calibration events. Shift: Monday - Friday 8:00AM to 5:00PM, plus overtime as necessary Roles and Responsibilities * Performs inspection on equipment such as regular preventative maintenance and Calibration. * Provides trouble shooting to the equipment issues. * Maintains and updates other metrology tools * Maintains the IQA labs for cleanroom, safety, 5S, ESD etc. standards * Completes First Article Inspection Reports for manufactured and purchased items (FAIR). * Manages to reduce non-conforming material (NCM) through timely disposition, transactions, and reporting. * Performs incoming inspection and product in-line inspection per documented requirements * Generates incoming inspection documentation. * Leads the cycle count in the IQA teams * Updates and assists with managing the IQA Master Log and IQA records. Qualifications * 3+ years of experience as a Quality Inspector, or Manufacturing/Process Technician, or as Senior Quality Inspector. * ERP system transactions knowledge is required. * Ability to read and interpret Engineering Drawings. * Experience with measurement of precision mechanical and optical components/assemblies, using micrometers, calipers, go/no-go gauges, microscopes, optical comparators, etc. preferred. * Experience with inspection of components for laser diode assemblies and fiber optics preferred. * Proficient in the use of MS Office programs such as Excel, Word, etc. * Ability to work with minimal supervision. * Local travel may be needed for up to 15% of the time. nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: * Starting pay depends on qualifications: * Quality Technician I- $22.37 to $28.00 * Quality Technician II - $23.93 to $31.10 per hour * Senior Quality Technician III - $26.00 to $33.80 per hour * Shift differentials are paid at the rate of 10% for hours worked between 5:30PM and 12:00AM and at 15% for hours worked between 12:00AM and 5:30AM * Target Cash Bonus with potential payout of up to 2% of earned wages * 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays * Eligible for health benefits on the 1st day of the month after your start date * Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period * Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance * Employee Assistance Program * Aflac Supplemental Insurance * Flexible Spending and Health Savings Accounts * Employee Stock Purchase Plan * 401(k) with company match and immediate vesting * Jury Duty and Bereavement Leave Pay * Tuition Assistance * Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or *************. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: * E-Verify Participation Poster * Right to Work Poster

Requirements JOB RESPONSIBILITIES: To include but not limited to the following: · Proofing CMM programs out and making any changes necessary. Running preexisting programs. · QA technician and final inspector for custom composite tools/fixtures - EMS Division · QA technician and final inspector for precision CNC machined parts - Machining Division · Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. · Key contributor and participant - Quality Management System (ISO 9001:2008) design and implementation · Focal point for QA data management with in the Quality Tracking Database Software - Unipoint · Manual lay out of parts on the granite. Checking flatness, perpendicularity, parallelism etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: · Extremely detail oriented and focused on helping to maintain consistent quality standards · Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T · Strong communication skills and able to work as a team member when parts/assemblies are determined to be out of tolerance during final inspection · Experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. required · Experience with manual and/or automated CMM preferred (including formatting of CMM reports) · Experience working within an ISO 9001 registered organization is required · Able to work overtime and limited Saturday shifts as needed · Preference will be given to candidates with prior machinist experience · CQI or CQT preferred. · Strong working knowledge of Zeiss CMM's with Calypso software PERSONAL QUALIFICATIONS: · Strong decision-making skills · Self-Starter / Self-Motivated · Reliable and Dependable · Positive Attitude · Enjoys fast pace and rapidly changing environment · Honest with Stellar Integrity · Professional Demeanor and Respectful to people in all situations · Team Player COMPENSATION/BENEFITS: · $27 to $42 per hour DOE · Medical / Dental / Vision · 401k with company match up to 4% · Tiered Quarterly Bonus Program · Short-term and Long-term Disability · Tuition Assistance or Reimbursement · Life Insurance · Paid time off / paid holidays · Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $27 to $42 per hour DOE

Job DescriptionDescription: Ascentec Engineering LLC is hiring! We are looking for team members that have strong attention to detail skills and want to join a company where they can grow their career. This is a critical role and presents a great opportunity for someone to provide final assurance to our customers that their products are the highest quality. Please note that preference will be given to candidates that have experience working in a manufacturing setting, but this is not required. Come join our team and feel valued by celebrating our successes with donut days, company barbecues, Taco Tuesdays, and our annual May the 4th celebration (date our company was founded) complete with Stormtroopers! Shifts available: Swing Shift: Monday through Thursday, 4 p.m. to 2:30 a.m.; Weekend Day Shift: Friday, Saturday, & Sunday, 5 a.m. to 5:30 a.m.; and Weekend Night Shift: Friday, Saturday, & Sunday, 5 p.m. to 5:30 a.m. All shifts are full-time and eligible for benefits. Please note that these roles are on-site (not remote/not hybrid) and not eligible for Visa sponsorship or transfer of Visa sponsorship. Requirements: JOB RESPONSIBILITIES: To include but not limited to the following: Zeiss/Calypso CMM operation. Running preexisting programs. QA technician and final inspector for precision CNC machined parts Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. Key contributor and participant - Quality Management System (AS9100). Responsible for QA data management with in the Quality Tracking Database Software - Unipoint Non-Conformance verification of parts using the either alternate CMM or manual inspection methods. Checking flatness, perpendicularity, parallelism etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: Extremely detail oriented and focused on helping to maintain consistent quality standards Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T Strong communication skills and able to work as a team member when parts/assemblies are determined to be out of tolerance during final inspection Experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. required Experience with manual and/or automated CMM preferred (including formatting of CMM reports) Experience working within an AS 9100 registered organization is preferred Able to work overtime and weekend shifts as needed Preference will be given to candidates with prior CNC machinist experience CQI or CQT preferred. Working knowledge of Zeiss CMM's with Calypso software PERSONAL QUALIFICATIONS: Strong decision-making skills Self-Starter / Self-Motivated Reliable and Dependable Positive Attitude Enjoys fast pace and rapidly changing environment Honest with Good Integrity Professional Demeanor and Respectful to people in all situations Team Player COMPENSATION/BENEFITS: $27 to $35 per hour DOE Medical / Dental / Vision 401k with company match up to 4% Tiered Quarterly Bonus Program Short-term and Long-term Disability Tuition Assistance or Reimbursement Life Insurance Paid time off / paid holidays Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

The metal fabrication Quality Control Technician is responsible for verifying all fabricated metal parts meet established quality standards. The technician will work closely with the Quality Engineer to complete inspections throughout the production process. This involves using measuring tools and techniques to identify defects, ensuring compliance with blueprints and specifications, and reporting any issues to production teams to maintain product quality and prevent further problems. Responsibilities * Inspect fabricated parts by visually and physically examining metal components at various stages of production, such as raw materials, cut pieces, welded joints, and finished products, to check for dimensional accuracy, surface defects, and compliance with design specifications. * Utilize measuring tools such as tape measures, levels, calipers, micrometers, gauges, and other measuring instruments to ensure tolerances are met. * Read blueprints and specifications to thoroughly understand engineering drawings and technical specifications and verify that each fabricated part adheres to the intended design. * Identify potential quality issues such as misalignment, warping, scratches, dents, improper welding, and other imperfections during inspection. * Document inspection findings on quality control forms, noting any non-conforming parts and documenting corrective actions taken. * Communicate with production teams by reporting identified issues to production personnel and providing feedback to improve manufacturing processes and prevent future quality problems. * Implement corrective actions by working with operators to address quality issues by adjusting machining parameters, re-working defective parts, or implementing process improvements. * Maintain quality standards by ensuring adherence to established quality control procedures and industry standards, including safety regulations. Essential Skills * Strong understanding of metal fabrication processes, including cutting, welding, and bending. * Proficiency in reading and interpreting blueprints and technical drawings. * Attention to detail with the ability to check large quantities of documents to ensure they meet code specifications. * Expertise in using both standard and precision measuring tools, such as tape measures, levels, calipers, micrometers, and gauges. * Excellent communication and problem-solving skills. * Familiarity with quality control methodologies and documentation practices. * Proficiency in working with computers, including Word, Excel, Adobe, and Outlook. * Availability to work overtime as required, including some weekend work. Additional Skills & Qualifications * Interest in becoming a Certified Welding Inspector (CWI). * Ability to train and mentor others. Work Environment The role involves splitting time between the office and the shop floor, looking at parts, reviewing documentation specific to each build, and interacting with machine operators, welders, and inspectors. Flexible start and finish times for scheduling are offered, and the company supports obtaining a CWI certification if not already held. Upon conversion, 100% of medical benefits are paid for the employee and all family members, and the 401k employer contribution is based on profitability, not dropping below 15% in the past five years. Job Type & Location This is a Contract to Hire position based out of Portland, OR. Pay and Benefits The pay range for this position is $23.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portland,OR. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Requirements JOB RESPONSIBILITIES: To include but not limited to the following: Zeiss/Calypso CMM operation. Running preexisting programs. QA technician and final inspector for precision CNC machined parts Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. Key contributor and participant - Quality Management System (AS9100). Responsible for QA data management with in the Quality Tracking Database Software - Unipoint Non-Conformance verification of parts using the either alternate CMM or manual inspection methods. Checking flatness, perpendicularity, parallelism etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: Extremely detail oriented and focused on helping to maintain consistent quality standards Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T Strong communication skills and able to work as a team member when parts/assemblies are determined to be out of tolerance during final inspection Experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. required Experience with manual and/or automated CMM preferred (including formatting of CMM reports) Experience working within an AS 9100 registered organization is preferred Able to work overtime and weekend shifts as needed Preference will be given to candidates with prior CNC machinist experience CQI or CQT preferred. Working knowledge of Zeiss CMM's with Calypso software PERSONAL QUALIFICATIONS: Strong decision-making skills Self-Starter / Self-Motivated Reliable and Dependable Positive Attitude Enjoys fast pace and rapidly changing environment Honest with Good Integrity Professional Demeanor and Respectful to people in all situations Team Player COMPENSATION/BENEFITS: $27 to $35 per hour DOE Medical / Dental / Vision 401k with company match up to 4% Tiered Quarterly Bonus Program Short-term and Long-term Disability Tuition Assistance or Reimbursement Life Insurance Paid time off / paid holidays Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $27 to $35 per hour

The metal fabrication Quality Control Technician is responsible for verifying all fabricated metal parts meet established quality standards. The technician will work closely with the Quality Engineer to complete inspections throughout the production process. This involves using measuring tools and techniques to identify defects, ensuring compliance with blueprints and specifications, and reporting any issues to production teams to maintain product quality and prevent further problems. Responsibilities + Inspect fabricated parts by visually and physically examining metal components at various stages of production, such as raw materials, cut pieces, welded joints, and finished products, to check for dimensional accuracy, surface defects, and compliance with design specifications. + Utilize measuring tools such as tape measures, levels, calipers, micrometers, gauges, and other measuring instruments to ensure tolerances are met. + Read blueprints and specifications to thoroughly understand engineering drawings and technical specifications and verify that each fabricated part adheres to the intended design. + Identify potential quality issues such as misalignment, warping, scratches, dents, improper welding, and other imperfections during inspection. + Document inspection findings on quality control forms, noting any non-conforming parts and documenting corrective actions taken. + Communicate with production teams by reporting identified issues to production personnel and providing feedback to improve manufacturing processes and prevent future quality problems. + Implement corrective actions by working with operators to address quality issues by adjusting machining parameters, re-working defective parts, or implementing process improvements. + Maintain quality standards by ensuring adherence to established quality control procedures and industry standards, including safety regulations. Essential Skills + Strong understanding of metal fabrication processes, including cutting, welding, and bending. + Proficiency in reading and interpreting blueprints and technical drawings. + Attention to detail with the ability to check large quantities of documents to ensure they meet code specifications. + Expertise in using both standard and precision measuring tools, such as tape measures, levels, calipers, micrometers, and gauges. + Excellent communication and problem-solving skills. + Familiarity with quality control methodologies and documentation practices. + Proficiency in working with computers, including Word, Excel, Adobe, and Outlook. + Availability to work overtime as required, including some weekend work. Additional Skills & Qualifications + Interest in becoming a Certified Welding Inspector (CWI). + Ability to train and mentor others. Work Environment The role involves splitting time between the office and the shop floor, looking at parts, reviewing documentation specific to each build, and interacting with machine operators, welders, and inspectors. Flexible start and finish times for scheduling are offered, and the company supports obtaining a CWI certification if not already held. Upon conversion, 100% of medical benefits are paid for the employee and all family members, and the 401k employer contribution is based on profitability, not dropping below 15% in the past five years. Job Type & Location This is a Contract to Hire position based out of Portland, OR. Pay and Benefits The pay range for this position is $23.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portland,OR. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job DescriptionDescription: Ascentec Engineering LLC is hiring! We are seeking a CMM Quality Technician IV who will serve as the technical authority for Coordinate Measuring Machine (CMM) programming, inspection methodology, and data analysis in support of New Product Introduction (NPI) and production. This role is responsible for executing precision inspection for complex parts and for training and developing current and future metrology personnel to a defined standard. The position will lead the creation, implementation, and ongoing management of the company's CMM Training Manual, establishing a unified standard of metrology practices for all company sites, domestic and international. This position is on-site (not remote/not hybrid) and is not eligible for Visa sponsorship or transfer of Visa sponsorship. Requirements: JOB RESPONSIBILITIES: To include but not limited to the following: Develop, validate, and optimize CMM programs to support NPI parts, ensuring compliance with customer drawings, GD&T, and process of record requirements. Partner with Engineering, Quality, and Production to establish robust inspection strategies that mitigate risk in early-stage builds. Troubleshoot and resolve dimensional inspection challenges, ensuring on-time delivery of inspection data. Design and deliver structured training for CMM operators and inspectors, including onboarding for new hires and upskilling for current staff. Update and manage a CMM Operator Evaluation Template to measure technical proficiency, productivity, and quality of output against defined standards. Conduct skill gap assessments and implement targeted development plans for individuals and teams. Lead the creation and deployment of the Ascentec Engineering CMM Training Manual, stored within company systems, to serve as the standard for all sites. Standardize CMM programming methods, inspection workflows, and reporting formats across facilities. Implement inspection KPIs (e.g., first-pass yield, programming cycle time, inspection backlog, repeatability/reproducibility metrics) and drive performance improvement. Ensure calibration schedules, probe qualification, and maintenance plans are adhered to for all metrology equipment. Evaluate and recommend emerging inspection technologies, automation, and software enhancements to improve accuracy, throughput, and efficiency. Benchmark Ascentec's metrology capabilities against industry leaders and develop plans to close gaps. Operates dedicated metrology equipment. Proofs CMM programs out while making any necessary changes and runs preexisting programs Performs other duties as assigned. MINIMUM REQUIREMENTS: Education/Certifications High School Diploma or equivalent CORE COMPETENCIES: Advanced CMM Programming & Optimization - Expert in developing, validating, and refining complex CMM programs to meet GD&T and customer drawing specifications, especially for new product introduction (NPI) parts. Inspection Strategy Development - Collaborates cross-functionally with Engineering, Quality, and Production to establish robust, risk-mitigating inspection strategies during early-stage builds. Technical Troubleshooting & Problem-Solving - Capable of diagnosing and resolving complex dimensional inspection challenges to ensure timely and accurate reporting of critical quality data. Training Program Design & Delivery - Designs and delivers structured onboarding and upskilling programs for CMM operators and inspectors; mentors team members and supports long-term skill development. Performance Evaluation & Skill Assessment - Develops and maintains tools (e.g., Operator Evaluation Templates) to assess technical proficiency and drive targeted performance improvements. Documentation & Standardization Leadership - Leads creation of standardized CMM manuals, work instructions, and best practices libraries to ensure consistency across sites and teams. Cross-Site Process Standardization - Champions uniformity in CMM programming techniques, inspection workflows, and reporting formats across company facilities. Continuous Improvement & KPI Management - Implements and tracks key inspection metrics (e.g., first-pass yield, cycle times, repeatability) to drive performance, quality, and throughput improvements. Calibration & Equipment Readiness - Oversees metrology equipment calibration, probe qualification, and maintenance schedules to maintain compliance and measurement accuracy. Technology Evaluation & Innovation - Researches and recommends emerging inspection technologies, automation solutions, and software tools to enhance inspection capability and scalability. Industry Benchmarking & Capability Growth - Benchmarks internal metrology systems against industry best practices and drives strategic improvements to maintain competitive edge. Communication & Collaboration - Effectively communicates across departments and levels, providing technical leadership while aligning quality objectives with production and engineering goals. Systems & Documentation Management - Maintains high standards in digital documentation, version control, and system-based storage for training, work instructions, and inspection protocols. COMPENSATION/BENEFITS: $34 to $50 per hour DOE Medical / Dental / Vision 401k with company match up to 4% Tiered Quarterly Bonus Program Short-term and Long-term Disability Tuition Assistance or Reimbursement Life Insurance Paid time off / paid holidays Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.