Quality control technician jobs in Howell, NJ - 770 jobs

Manufacturing Analytical Technician (Chemical Industry) Croydon,PA (onsite) Apply only if you have experience in Chemical Industry and if you are fine to work in Rotating Shifts. Supports manufacturing operations by conducting laboratory analyses, as needed, which provide critical data. Prepares samples, performs preventive maintenance of laboratory instrumentation and uses data systems to acquire data. Reports results to the client. Requires established basic laboratory skills to perform a range of routine lab activities using existing standard operating procedures and or analytical scientific methods. Responsibilities Duties Trains to perform routine analyses under direction of senior team member until proficiency is demonstrated. Collects samples according to the Sample Plan. Performs basic preventative maintenance of analytical systems. Provides evaluation of validity of data for routine analyses and takes appropriate action. Monitors analytical systems and escalates problems as appropriate. Documents, communicates and archives analytical results and data. Follows EHandS and operating discipline management system (ODMS) procedures and practices for work tasks. Suggests improvements to lab work processes and tools. Escalates non-routine requests to appropriate team member for follow-up. Experience Completion of Vocational Education or Upper Secondary Education (i.e. High School Diploma) plus laboratory, manufacturing or other related experience. Post Upper Secondary Education coursework in chemistry or related coursework.

Perform detailed inspections of in process jewelry products throughout the manufacturing process, including rings, necklaces, bracelets, earrings, and other accessories, to ensure they meet established quality standards and specifications. Provide fe Associate, QC, Jewelry, Manufacturing

Job Title: Lab TechnicianJob Description The Lab Technician will perform activities necessary to maintain and operate the development work in the laboratory under supervision. The role includes performing technical tasks, stability work, and routine and non-routine ordering of raw materials. Additionally, the technician will manage time for environmental stability and validation samples with their supervisor. Responsibilities + Laboratory batching of prototype and final formulations (liquid, emulsion, and surfactant formulas) for clinical and consumer studies, product stability testing, and customer review using approved procedures upon completion of successful training. + Maintain and calibrate laboratory equipment, including balances, pH meters, viscometers, etc. + Manage time independently and ensure proper documentation of notebooks, logbooks, and other documentation such as raw material MSDS in accordance with laboratory procedures and corporate safety and quality standards. + Participate in the investigation of out-of-specification test results or stability issues and review findings with Laboratory management. + Sample management and ordering of raw materials and finished goods. + Evaluate and analyze competitive products and report results. + Assist in cleaning lab glassware using the dishwasher and maintain laboratory space to ensure a clean working environment following all corporate health and safety protocols. Essential Skills + Understanding of laboratory safety requirements, working with laboratory chemicals, and the MSDS system. + General understanding of chemical test methods and chemical instrumentation. + Basic wet chemistry techniques. Additional Skills & Qualifications + High school diploma or a 2-year associate degree in a technical or science field, preferably in Chemistry or Biology. + Some chemistry lab work experience from high school or college is required. + Prior experience in a laboratory environment, such as Research & Development, Quality Assurance, or Quality Control, is desirable. + Experience working with personal care, hair care, skin care, or oral care products is desirable. Work Environment The work environment includes using laboratory equipment such as balances, pH meters, and viscometers. The role involves maintaining a clean laboratory space and adhering to corporate health and safety protocols. The technician will work with laboratory chemicals, perform chemical test methods, and use chemical instrumentation in a collaborative setting. Job Type & Location This is a Contract position based out of Lakewood, NJ. Pay and Benefits The pay range for this position is $25.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lakewood,NJ. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Hi, we're The Browser Company 👋 and we're building a better way to use the internet. Browsers are unique in that they are one of the only pieces of software that you share with your parents as well as your kids. Which makes sense, they're our doorway to the most important things - through them we socialize with loved ones, work on our passion projects, and explore our curiosities. But on their own, they don't actually do a whole lot, they're kind of just there. They don't help us organize our messy lives or make it easier to compose our ideas. We believe that the browser could do so much more - it can empower and support the amazing things we do on the internet. That's why we're building one: a browser that can help us grow, create, and stay curious. To accomplish this lofty task, we're building a diverse team of people from different backgrounds and experiences. This isn't optional, it's crucial to our mission, as we need a wide range of perspectives to challenge our assumptions and shape our browser through a bold, creative lens. With that in mind, we especially encourage women, people of color, and others from historically marginalized groups to apply. About The Role As a technical leader on the Product Engineering team at The Browser Company, you'll be instrumental in our team's ability to design and ship novel AI features that redefine the future of browsing. You will turn ambiguous goals into elegant solutions and lead with a design‑forward, product strategy mindset rooted in user experience as we continue to scale Dia. We're looking for someone who is product-minded, deeply curious, and able to balance rapid prototyping with production‑quality code, applying an AI lens wherever it adds clear user value. You'll apply the latest learnings and models to enhance our product use cases, set technical direction, evolve our architecture, and invent new ways of building AI products - ways that are fast, flexible, and grounded in user experience. Product Engineering at The Browser Company is a place for creative exploration and rapid prototyping. We go from new ideas to prototypes in hand in days, and we ship new features and improvements to Dia weekly, so the impact of your work shows up fast. We listen, iterate, and keep shaping Dia to solve real problems in ways that feel simple and delightful. Overall you will… Shape Dia's feature roadmap with technical leaders, and lead with rapid prototyping. You'll build interactive prototypes, validate with users and the team, and translate winning explorations into high‑craft production code. Prototype, architect, and execute LLM-powered features ensuring every decision is grounded in user impact and business value. Mentor and support a high‑performing team of Product Engineers, growing their technical depth, craft quality, and product thinking through fast, iterative cycles. Proactively improve, identify and implement engineering-wide processes and architecture with an eye towards performance, stability, and maintainability. Sweat the small stuff to deliver high‑craft, interaction‑rich user experiences that set a new standard for the industry. Qualifications 8+ year of experience building and tech leading high‑craft software products, with deep experience in both user‑facing product development or have shipped AI features from 0‑1. You have hands‑on experience building with LLMs, an understanding of how they work, and a genuine curiosity to go deep on the technology. You have a strong track record of coaching and mentoring software engineers. You're experienced in solving ambiguous problems and have successfully owned complex technical initiatives and projects that have had an outsized impact on a business. You're pragmatic, motivated by nebulous problems, and excited to work in a startup environment with quick product validation cycles. Most of our team is based in North American time zones and require that folks have 4+ hours of overlap time with team members in Eastern Time Zone. You resonate with our company values and can continue to scale your team with these in mind. Compensation and Benefits Our total compensation package for full‑time employees includes base salary, equity, and benefits. The annual salary range for this role is $250,000-$310,000 USD. The actual salary offered will vary based on experience level and interview performance. Benefits: We also offer a wide range of perks and benefits designed to support you, your family and to help you engage with your local community. To learn more, visit go.atlassian.com/perksandbenefits. Location: We're a remote‑friendly company and can hire in any country where Atlassian has a legal entity. If you live in New York (or want to visit), you're welcome to work from our beautiful office in Williamsburg. The Browser Company is an ambitious team of close to 100 people (and growing!) who are passionate about building great products. We are a remote‑first, distributed team, with the option to work from office in Brooklyn, New York. We strongly support diversity and encourage people from all backgrounds to apply. 🚙 To read more about what we value as a company, check out Notes on Roadtrips on our blog. #J-18808-Ljbffr

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite , Price Rite , The Fresh Grocer , Dearborn Markets , Fairway Markets, Gourmet Garage , Di Bruno Bros , and Morton Williams banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern's co-operative members benefit from the company's extensive portfolio of services, including innovative technology, private label development, and best in class procurement practices. Your contribution The Product Inspector position is responsible for performing routine and thorough inspections of all inbound perishable foods to ensure the quality, wholesomeness, proper labeling, and fair packaging in adherence to the Wakefern standards. The Product Inspector will be expected to exhibit first-hand knowledge of Wakefern's Food Safety and Quality Practices along with USDA and FDA Guidelines. Additional job functions noted below. The hours worked will be 12:00am-8:00am. What you will do Inspects all inbound deliveries to ensure the purchased goods conform to all established product specifications, standards, and grade requirements. This applies the Drive for Results competency. Performs random organoleptic inspections of inbound goods to assure the quality, grade, and wholesomeness of the product. Inspects all inbound deliveries for cleanliness and soundness of the transportation vehicle and the absence of cross contamination. Monitors product temperatures by means of physical probing of goods and observation of time and temperature recording devices. Verifies the weights and counts of received goods. Examines all packaging for proper labeling and enforces all packaging and labeling requirements of the FDA, USDA, and USDC. Monitors products in inventory and storage for quality and safety. Performs daily sanitation inspections of all applicable facilities and warehouses. Gathers and organizes all records and documentation to comply with all regulatory requirements. Monitors all control points, critical control points, and quality control points for each of the food safety and food quality plans for the applicable perishable food facilities. Monitors store returns to determine if credit is warranted and direct operations as to the disposition of the returned goods. Core Competencies Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two way communication. Build Relationships: Creates cross functional partnerships through the development and maintenance of constructive and cooperative relationships. Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work. Embrace Change: Looks for new ways of working by supporting advancements in processes and technology. Develop You: Identifies and capitalizes on opportunities for personal and professional career growth. Drive for Results: Supports divisional and strategic objectives through achievement of work goals. What we're looking for Four year College degree preferred, or presently enrolled with a minimum of 60 credits, or a minimum of 3 years equivalent work related experience. Knowledge of USDA, AMS Grade Standards and inspection procedures, impacting the Drive for Results competency. Knowledge and understanding of FDA Preventive Controls for Human Food requirements, applying the Stay Competitive competency. Understanding and ability to monitor Sanitation Standard Operating Procedures. Must be able to maintain accurate records and reports. Ability to interact well with Supervision as well as Affiliated Warehouse Associates, applying the Build Relationships competency. Ability to communicate effectively with all levels of management and vendor representatives. Well-developed written and oral communication skills. Skilled in WMS, Rapid, Outlook, Microsoft Word, and Excel. Flexibility with regards to work schedule including days of the week, shifts, holidays, and locations. (Hours/Shifts 12:00am-8:00am). How you'll work Ability to perform heavy lifting (up to 70 lbs.). Ability to walk the length of the warehouse multiple times throughout the day (back and forth from the docks). Physical demands include the ability to bend, stretch, extend, tug and pull based on inspection of various products Ability to work in cold temperatures as low as 33 degrees. Company Perks Vibrant Food Centric Culture Comprehensive medical, dental and vision package Competitive Salary and Paid Time Off Fitness Reimbursement and Well-Being Program Corporate Training and Development University Collaborative team environment Paid Parental Leave 401K Matching Gifts and Community Volunteer Involvement Compensation and Benefits The salary for this position is $61,984.00. Placement in the salary depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements. More information can be found on our Count Me In website.

Host Healthcare is seeking a travel Cath Lab Technologist for a travel job in The Bronx, New York. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Duration: 13 weeks 37 hours per week Shift: 12 hours, days Employment Type: Travel Host Healthcare Job ID #a1fVX000002QWr7YAG. Pay package is based on 12 hour shifts and 37 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Tech About Host Healthcare At Host Healthcare, we provide a truly comfortable experience as you explore your travel nursing, therapy, or allied career. We make your travel healthcare journey easy by taking care of all the details, so you don't have to. We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what's important to you. During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more. We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment. Travel comfortably with Host Healthcare. Benefits Referral bonus School loan reimbursement Vision benefits Wellness and fitness programs Company provided housing options License and certification reimbursement Life insurance Medical benefits Mileage reimbursement Pet insurance Discount program Employee assistance programs Guaranteed Hours Health savings account Holiday Pay 401k retirement plan Continuing Education Dental benefits

Contract for 12 Months with potential to extend Monday - Thursday, 8:00AM - 4:00PM EST Onsite in Piscataway, NJ The individual will be working in an industry lab setting, namely, Oral Care Product Development. The candidate's main responsibility will be the production of lab batches for toothpaste on a daily basis, the running of in-vitro assays, the creation of stability protocols in LabNet and the organization and tracking of samples for testing and aging analysis. The candidate will support other lab personnel with the functional testing of products as required per protocols. Additionally, proper documentation of work and results are very important.

Performs daily functions such as compounding flavors, sampling, raw material and finished flavor maintenance. Performs daily laboratory housekeeping Performs raw material and finished flavor maintenance including data entry and re-stocking inventory Precise compounding of flavors following formula instructions Confirms the integrity of raw materials before using Performs organoleptic and visual tests of finished flavors before using Effectively collaborates with other departments (Sales Service, Regulatory, R&D Labs, Production) Commitment to Robertet and SQF Quality Standards and continuous improvement of the quality management systems Adhere to Sample Lab GMP's, SOP's and safety procedures, including the use of PPE Able to maintain a clean and organized work area Required: High School Diploma Basic math skills Preferred: Microsoft Office Applications Knowledge of Oracle

Description About Us: Advanced Systems Group, LLC enables creativity through better technology and operations for media creatives and content owners. From acquisition to delivery, on-premises or in the cloud, ASG ensures our clients' success through tailored solutions. One of North America's largest Media and Entertainment Technology and Operations suppliers, we provide engineering services, physical and cloud integration, training, support, and managed services. Our Managed Services deliver customised operations and services for all phases of media production, including creative and engineering. Founded in 1997, and providing nationwide services, ASG has teams based in North America, South America, and Europe.We are looking for: Advanced Systems Group LLC is seeking experienced Production Technicians to join our high performing team and support high volume live and on demand studio programming in a polished, fast paced broadcast environment within our Client Site.This position is part of our Flex Workforce. As a Flex team member, you'll work on a project-to-project basis, supporting a variety of leading media and technology clients. Flex roles are ongoing and dynamic-work may vary in cadence, length, and scope depending on client needs. This setup offers flexibility, exposure to top-tier companies, and the chance to grow your skills across multiple exciting assignments. Estimated schedule: Shift based rota including early mornings, evenings, weekends (Saturdays) and public holidays as required. Between 20 and 40 hour work weeks. (Specific schedules will vary by project and client engagement.) Responsibilities: Operate a sound desk, robotic multi camera system and coordinate lighting and general technical setup to support high quality live and recorded production Monitor, troubleshoot and uphold production quality for live and prerecorded streams Support the workflow that transforms live events into on demand assets Act as the first point of escalation for production related issues, collaborating closely with engineering and wider teams Ensure smooth execution of production runs including protocols, timings and on the ground coordination QC additional production content including scenic assets, original production and remote content Contribute to an environment that values creativity, innovation, problem solving and operational excellence Required Qualifications & Experience: Professional experience in a live broadcast or studio control room environment Strong understanding of technical equipment including vision mixers, robotic camera systems and audio desks Clear understanding of shot framing, audio mixing and production comms etiquette Ability to multitask under pressure while maintaining accuracy and attention to detail Motivated team player with a proactive approach, strong communication and a commitment to collaborative working Must have working knowledge of: Control Room Technology - Operator Level Competency Ross Carbonite/TouchDrive Mark Roberts Robotics Camera Control Yamaha QL1 Audio Mixing Console RTS Comms Panels Telestream Lightspeed Live Capture (Ingest System) Glym Clipping Tool Sony FX6 Camera Knowledge Basic Mac OS X and Apple Computer experience Ross and EVS Control Panels Preferred Qualifications & Experience: Experience in high frequency live production environments Understanding of end to end streaming workflows Comfort working in shifts including early mornings, evenings and weekends Background in fast paced creative, fitness, entertainment or lifestyle studio environments This project-based role offers an hourly pay rate of $35-42/hour depending on experience. Advanced Systems Group LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

JobID: 210684391 JobSchedule: Full time JobShift: Base Pay/Salary: Brooklyn,NY $142,500.00-$200,000.00; Jersey City,NJ $142,500.00-$200,000.00 Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in Cybersecurity Technology & Controls, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities * Develop and maintain robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals * Execute reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work * Proactively monitor and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance * Lead and execute complex, cross-functional GRC programs and initiatives, ensuring they achieve strategic outcomes and align with business objectives * Identify, manage, and mitigate delivery risks, proactively addressing potential roadblocks and implementing contingency plans to maintain program momentum * Partner with key stakeholders to iterate on design, implement, and continuously operate and enhance technology risk and control frameworks, ensuring they meet industry standards and regulatory requirements Required qualifications, capabilities, and skills * Obtain 6+ years of experience or equivalent expertise in technical program management, cybersecurity, and/or technology controls roles * Proficiency in cybersecurity domains, including policies and standards, risk and control assessments, and regulatory compliance * Proficiency in regulatory, legal, and industry standards such as NIST, ISO 27000 family, COBIT, FSP etc. * Experience in developing, implementing, and operating robust risk and control frameworks to mitigate technology failure and cybersecurity risks * Ability to ensure decisions or constraints affecting program delivery are effectively escalated and addressed in a timely manner * Strong verbal and written communication skills to translate technical risks into business impacts and engage with stakeholders at all levels * Strong analytical skills to dissect complex challenges, conduct thorough root cause analysis, and develop effective solutions * Proficient knowledge and expertise in data security, risk assessment & reporting, control evaluation, design, and governance, with a proven record of implementing effective risk mitigation strategies * Demonstrated ability to influence executive-level strategic decision-making and translating technology insights into business strategies for senior executives Preferred qualifications, capabilities, and skills * CISM, CRISC, CISSP, or similar industry-recognized risk and risk certifications are preferred #CTC

I have an awesome QC Reference Med Tech role available near Flushing, New York! Details - Full-time and permanent - Shift: Days - Opportunities for growth - Full, comprehensive benefits package (PTO, health insurance, life insurance, 401k, etc) - Pay: $44-$52/hr Requirements - College degree - NY license - ASCP cert - Prior experience, including blood bank Click apply or email your resume to leah@ka-recruiting.com/call or text 617-746-2751! You can also schedule a time to chat here -https://calendly.com/leahkarecruiting/10min. REF#LM3388

Exodigo is the new gold standard for subsurface intelligence. Our revolutionary solutions combine multi-sensing technology, high-precision GPS, and advanced machine learning to deliver the most accurate underground maps in the world. With Exodigo, infrastructure owners can build smarter, faster, and more confidently - delivering capital projects on time, on budget, and without surprises. Headquartered in Palo Alto and Tel Aviv, our team brings unparalleled experience in AI and signal processing from elite Israeli intelligence units and is backed by top industry partners. With more than $200M raised to date, including a 96M Series B in July 2025, we are experiencing skyrocketing growth and redefining how the world builds. Job description We are seeking a Technical Field Quality Control Specialist to join our Global Supply Chain department. You will travel across the U.S. to Exodigo's warehouse and 3PL sites to perform equipment field tests and quality control for kits. This position will be the primary technical bridge between U.S. Logistics and the R&D/Supply Chain teams in Israel regarding technical issues -verifying kits to a serial-number level, documenting results in NetSuite in real time, coordinating shipments, driving clear escalations, and, when required, performing light manufacturing and local repairs under Supply Chain guidance. The role also includes field acceptance testing and lab-based troubleshooting/repairs to keep deployments on schedule. Key Responsibilities Warehouse-to-Warehouse Field QC * Visit company and 3PL warehouses on a defined weekly plan; run incoming, pre-deployment, and post-return checks; commission/decommission kits; confirm "field-ready" status. Pre-Deployment Quality Inspections * Inspect technological products/kits prior to shipment per Exodigo standards and approved procedures. Field Tests / Acceptance * Execute field tests to validate performance and reliability; capture logs, photos, and replicable steps; publish findings. U.S. Repair Lab Support * Diagnose issues and perform light electronic/mechanical rework, module/board swaps, calibrations, and ATP per BOM/WI; verify fixes and return units to stock.• Technical Liaison * Serve as the primary technical point of contact with R&D and Supply Chain (Israel); clarify specs/requirements/timelines and manage escalations through resolution. RMA / Vendor & 3PL Repairs * Collect defective units, classify failure modes, arrange temporary replacements, and shepherd repairs with approved vendors/3PL through return-to-stock, including post-repair verification. Software/Firmware Currency * Track required versions, install/configure updates, and confirm correct operation prior to release. ERP/WMS Accuracy (NetSuite) * Update serial-level status, inventory movements, and QC results in real time; partner with the ERP team to streamline workflows, forms, and traceability fields. Documentation & Training * Create/maintain SOPs, checklists, quick guides, and integration notes using Exodigo templates; coach warehouse staff on handling, ESD, and basic diagnostics. Safety & Compliance * Follow ESD, lithium-battery, and warehouse safety practices; maintain audit-ready sites. Light Manufacturing & Local Repairs (as needed) under Supply Chain guidance * Perform small-batch builds and rework for kits (e.g., cable/crimp/termination, labeling, minor mechanical assembly, module swaps), calibrations, and acceptance tests; implement ECO/ECR on affected units; manage materials/consumables/tooling; record as-built and component traceability in NetSuite. Requirements * Experience in technical field service, hardware QC/commissioning, or warehouse-based testing across multiple sites; exposure to 3PL is a plus. Background with GPR/EM/sensor systems is an advantage. * Strong hands-on diagnostics and basic rework skills: multimeter/oscilloscope use, connector/cable testing, firmware flashing, and actionable defect reporting (logs, photos, steps to reproduce). * Comfortable executing light manufacturing/repair to documented standards (BOM/WI/SOP); familiarity with NCR/RMA, ISO-style documentation, and IPC workmanship (e.g., IPC-A-610/620) is a plus. * Working knowledge of ERP/WMS processes; NetSuite experience strongly preferred; familiarity with Jira/Confluence is helpful. * Excellent written and verbal communication; effective collaboration across time zones with Israel. * Ability to travel frequently (domestic ~60%) and occasionally internationally, and to work safely in warehouse environments. Ability to safely lift and handle typical field-kit components (up to ~50 lb). Work Style & Schedule * On-site role in the New York metro area with frequent domestic travel to designated warehouses and 3PL sites across the U.S., plus occasional international trips to support inspections/deployments. * Occasional early/late calls to collaborate with R&D and Supply Chain teams in Israel. Salary: $75,000 - 95,000 Learn more Our mission is to power the next era of underground exploration - saving time, money, lives, and the planet. We are focused, intentional, confident, and hard working. We solve big problems, but we are approachable, open-minded, and love hard questions. You can learn more about us on our website or check out this short video. Apply on our careers page, via Linkedin or send your resume to ***************************

Become a Resiliency Technology Risk and Controls Lead Are you ready to lead and innovate in the realm of technology resiliency? Join our Employee Platforms Resiliency Technology team as a Resiliency Technology Risk and Controls Lead, where your expertise will drive our resiliency strategy forward. In this pivotal role, you will be a key point of contact for the resiliency team, managing multiple workstreams within our firmwide resiliency program. As a Resiliency Technology Risk and Controls Lead within the Employee Platforms Resiliency Technology team, you will be key leader with collaborating on our resiliency strategy. Your role will involve being a key point of contact for the resiliency team on multiple workstreams of the firmwide resiliency program. You will be instrumental in promoting the continuous improvement of our Resiliency Operating Framework, ensuring it aligns with our firmwide and regulatory obligations. Job responsibilities Supports the resiliency operating model framework, providing resiliency domain expertise as guidance to application and product owner. Ensuring all resiliency related compliance objective are met on time. Collaborates with Stakeholders, including Application Owners, Product Owners, Engineers, Tech and Business Control Managers, and Software Reliability Engineers to ensure alignment and integration of resiliency practices across the firm. Achieves risk and performance measures to continuously validate and assess the effectiveness of resiliency controls, incorporating them into reporting and escalation processes. Participates in post incident response, planning and root cause analysis to ensure quick lessons learned from disruptions and establish action items for resiliency gap remediation. Supports the development and implementation of our comprehensive resiliency strategy that integrates business and technology risk management to mitigate risks associated with disruptive events. Required qualifications, capabilities, and skills 5+ years of extensive experience focusing on resiliency, program management, or controls. Proficient knowledge in core infrastructure technologies and experience with cloud provider products and services. Strong ability to influence and drive change, with a proactive approach to identifying potential issues and implementing practical solutions. Excellent verbal and written communication skills, with the ability to lead discussions with cross lines of business team at multiple levels. Strong analytical and problem-solving skills with attention to detail and accuracy. Expert in managing relationships, partnering with stakeholders, and resolving conflict to deliver solutions that meet the needs of the business. Excellence in High-Pressure Environments: Demonstrated leadership in crisis management, strategic stress management, task prioritization, and sound decision-making, with the ability to excel in problem-solving. Demonstrated domain expertise in crisis management, strategic stress management, task prioritization. Preferred qualifications, capabilities, and skills Financial industry exeperince Knowledge of the JPMC Business and Technology Resiliency Framework Familiar with JPMC CORE Objectives and Procedures Strong data analytics skills

Job DescriptionOVERVIEW: Quality Control Technician:The Quality Control Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the Quality Control Technician - Manufacturing is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. This position runs Monday - Friday, with the following shifts: 2nd Shift: 2:00 PM - 10:30 PM 3rd Shift: 10:00 PM - 6:30 AM QUALIFICATIONS: Quality Control Technician: High school diploma or equivalent qualification. Certification in quality control is preferred. Must have food manufacturing experience. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math, technical, and communication skills. Strong understanding of quality control standards and testing techniques. KEY RESPONSIBILITIES: Quality Control Technician: Perform thorough inspections of raw materials, components, and finished products to check for defects, non-conformities, and deviations from quality standards. Work closely with production teams to ensure that manufacturing processes are in compliance with quality standards and are carried out correctly. Inspect finished produced goods to ensure their quality and adherence are up to specifications. Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. Reject all products and materials that fail to meet quality expectations. Collect and take samples of production batch to ensure products are meeting standards. Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. Ensure that inspection and testing equipment are regularly calibrated to maintain accuracy and reliability. Investigate the root causes of quality issues, collaborate with cross-functional teams, and recommend corrective and preventive actions to prevent future occurrences. Conduct internal audits of manufacturing processes and procedures to ensure ongoing compliance with quality standards and regulations. Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. Prioritize safety in the manufacturing environment, ensuring that quality control activities are carried out safely and in accordance with safety protocols. Other duties as assigned. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

**Technician, Quality Control** **Princeton NJ, US** **On-Site** The QC Technician is responsible for maintaining conducting analyses, results entry and reporting and processing of quality related deviations, to ensure products meet specified standards defined, to help ensure that the products manufactured are safe, reliable, and meet both internal and external requirements, promoting customer satisfaction and trust in the business. **Your key responsibilities** + Perform Lab Tests: Independently carry out routine quality control analyses following set procedures. + Data Integrity & Documentation: : Confidently handle all steps of testing, including preparation, execution, and accurate documentation. + Check Results: Review test results for accuracy and consistency before submission. + Initial OOS Testing: Conduct first-level tests for out-of-spec results as per procedures. + Escalate Issues: Identify recurring problems and escalate them to the appropriate person or team. + Maintain Equipment: Take care of assigned lab equipment, including calibration and basic maintenance, following GMP and safety standards. **We bring** + Empowerment to make meaningful contributions while upholding ethical standards. + Recognition and celebration of your efforts and accomplishments. + Opportunities for growth and advancement for those who embrace innovation and take initiative. + Collaboration with experts in health, nutrition, and beauty to drive progress. + Customer-first approach, working with world-renowned brands to turn ideas into impactful solutions. + Opportunity to build a career making a significant impact on billions of lives, with the freedom to shape your own path. + Dedication to creating better futures for customers, communities, people, and the planet. + Responsibility and accountability in living company values and driving sustainable solutions. + Supportive environment where individuals are empowered to progress and contribute to meaningful change. **You bring** + Education: Bachelor's degree in Science, or a related field preferred. + Experience: Minimum of 2 years of experience in quality control. + Fluency in local language a requirement, other languages encouraged. The salary provided reflects the pay range dsm-firmenich expects to pay the successful candidate for the position. Individual pay offered will be based on the applicant's job-related skills, experience, relevant education, or training, and primary work location. $47,000 - $68,000 In addition to base salary, we also offer a comprehensive total rewards package, inclusive of annual incentive pay, a retirement savings plan, health care coverage, paid time off, recognition programs and a broad range of other benefits. All benefits and incentives are subject to eligibility requirements. **About dsm-firmenich** At dsm-firmenich, we don't just meet expectations - we go beyond them. Join our global team powered by science, creativity, and a shared purpose: to bring progress to life. From elevating health to making fortified food and sustainable skincare, the impact of your work here will be felt by millions - every single day. Whether it's fragrance that helps you focus, alternative meat that's better for the planet, or reducing sugar without losing flavor, this is where you help shape the future of nutrition, health, and beauty for everyone, everywhere. And while you're making a difference, we'll make sure you're growing too. With learning that never stops, a culture that lifts you up and the freedom to move across businesses, teams, and borders. Your voice matters here. And your ideas? They're essential to our future. Because real progress only happens when we **go beyond, together** . **Inclusion, belonging and equal opportunity statement** At dsm-firmenich, we believe being a force for good starts with the way we treat each other. When people feel supported, included, and free to be themselves, they do their best work - and that's exactly the kind of culture we're building. A place where opportunity is truly equal, authenticity is celebrated, and everyone has the chance to grow, contribute, and feel they belong. We're proud to be an equal opportunity employer, and we're serious about making our hiring process as fair and inclusive as possible. From inclusive language and diverse interview panels to thoughtful sourcing, we're committed to reflecting the world we serve. We welcome candidates from all backgrounds - no matter your gender, ethnicity, sexual orientation, or anything else that makes you, you. And if you have a disability or need any support through the application process, we're here to help - just let us know what you need, and we'll do everything we can to make it work. **Agency statement** _We're managing this search directly at dsm-firmenich. If you're applying as an individual, we'd love to hear from you. We're not accepting agency submissions or proposals involving fees or commissions for this role._

Cresilon is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company's proprietary hydrogel technology. The company's plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at ***************** The Production Technician I is responsible for the aseptic manufacturing of Cresilon's products for the animal health industry. The Production Technician II will be trained in clean room operations, aseptic techniques, and must demonstrate the ability to successfully pass gowning qualifications. The position involves operating simple and complex processing equipment, routine sanitization of cleanroom facilities, and manual cleaning of equipment. The ideal candidate will have a proven track record of steady progress in a similar manufacturing environment and must possess a willingness to learn all equipment and jobs in the assigned manufacturing and sanitation of clean room facilities as required. Production Technicians are also responsible for the quality of products produced by ensuring compliance with local, State and Federal regulations, including current Good Manufacturing Practices (cGMP). * Perform line clearance of assigned production areas as required. * Perform equipment set up and disassembly activities. * Operate production, assembly and testing equipment, including heat sealers, bar code scanners, weighing scales, tumblers, autoclaves, filling equipment, and packaging equipment. * Formulate, fill, and pouch product in accordance with SOPs. * Troubleshoot all operating deviations and issues and coordinate with other functions when required. * Report both machine and operating deviations to area supervisor or designee. * Perform routine, preventative maintenance on equipment. * Perform cleaning and disinfection of the manufacturing spaces. * Perform cleaning and sterilization of manufacturing equipment. * Perform visual inspection of components and/or product in accordance with SOP's and cGMP's. * Perform sampling, intermediate, and finished goods packaging as per SOPs. * Package and ship raw materials for sterilization. * Perform material receiving, staging, material movements, and material replenishment as per SOPs. * Transport samples, materials, and equipment between multiple facilities. * Complete data entry and generate reports for material inventory movements. * Complete and maintain applicable logbooks and batch record paperwork as required and in accordance with GMP and GDP standards. * Maintain a clean production environment during shift. * Report all actual, near misses and potential accidents for further investigation. * Take immediate action to resolve any near miss situations. * Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently. * Assist in project commissioning and validation activities, as necessary. * Prepare samples or prototypes as required for testing, or other evaluations * Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process. * Complete all required trainings: Read and Understand (TM1), Computer Based Training with Quiz (TM2), Instructor Led (TM3/TM4), and On-the-Job Trainings (TM5). * Oversee training of junior employees on production processes as assigned. * Ensure proper communication and handling over of shift duties. * Support Environmental and Personnel Monitoring (EM/PM) activities as directed. * Responsibilities may include other duties as assigned and as required

Job Description Are you ready to join our team at C&L Auto Body, an esteemed family-owned MSO in Plainfield, NJ? We are in search of a talented and devoted Quality Control Technician to uphold our dedication to business expansion and client contentment. Your precision and proficiency will be pivotal in reducing customer inconvenience following accidents. This position is a great jumping-off point for higher-paying jobs such as estimating & production management. Compensation: $18 - $30 hourly Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Assure that C&L QC procedures are being followed by all departments Solely responsible for final quality inspections Assure that all repairs to the vehicle match the final invoice Perform other related duties as assigned to ensure an efficient and effective repair Meet & greet customers Review repairs of all vehicles & sign off on ready-for-delivery Deliver vehicles to customers, reviewing repairs & answering any questions Perform ADAS on all vehicles that need scanning or calibrations fill out appropriate paperwork & check in requirements for each vehicle Qualifications: The ideal candidate should have the following experience: Experience working in a Team Environment Prior working knowledge of body repairs and parts Prior experience in multi-tasking, prioritizing, and organizing Ability to effectively communicate Technical knowledge for automotives Ability to learn & adapt quickly customer service experience Quality control experience About Company C&L Autobody is a regional Multiple-Shop Organization (MSO) with 11 body shops throughout Morris, Essex, Sussex, Warren, Union, and Middlesex counties in Northern NJ. We also manage one of the largest towing fleets in the state. As one of NJ's largest family-owned MSOs, we pride ourselves on delivering an unmatched level of customer service and craftsmanship for all your collision repair needs. We offer full benefits (medical, dental, and vision), paid time off, paid holidays, and a 401(k) with a company match. Work hours are Monday through Friday, 8 am to 5 pm, with occasional Saturdays.

ProStaff Workforce Solutions is currently hiring a Quality Control Technician for our client in Neptune, New Jersey 07754. If you're interested, we'd love to connect with you and provide further details about this opportunity. Contract to Hire Schedule: Monday - Friday 7 am - 3:30 pm Pay Rate: $20/hr Job Summary: The Quality Control Technician - Will play a critical role in ensuring molded products meet quality standards based on standardize specifications. The primary objective of the Quality Control Technician is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. Key Responsibilities: • Perform thorough inspections of co-manufacture parts, product ingredients, and molded products. Check for defects, non-conformities, and deviations from quality standards. • Work closely with production teams to ensure that the manufacturing processes produce safe quality products. • Inspect molded parts continuously throughout the shift to ensure their quality and meeting specifications. • Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. • Reject all products and materials that fail to meet quality expectations. • Collect and take samples of production batch to ensure products are meeting standards. • Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. • Complete QC status report daily. • Be able to operate testing equipment for active water and moisture control of edible product • Ensure that inspection and testing equipment are regularly calibrated to maintain accuracy and reliability. • Continuous improvement of work instructions by providing feedback. • Be able to troubleshoot problems using critical thinking and coming up with solutions. • Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. • Prioritize food safety in the manufacturing environment, ensuring that quality control activities are carried out in accordance to safety protocols. • Follow the required SOP's / Work instruction (example CCP's; PC's; line clearance) • Follow the companies GMP regulations. • After Sanitation cleaning, be able to perform pre-operation visual inspection and ATP swab the equipment. • Other duties as assigned. Required Skills: • High school diploma or equivalent qualification. • Certification in quality control is preferred. • A minimum of 2 years' experience in a food safety environment. • Excellent knowledge of MS Office. • Good math, technical, and communication skills. • Strong understanding of quality control standards and testing techniques. • Required to walk and stand most of the day with occasional sitting to perform paperwork and measurements. • You must be able to lift up to 50 pounds while wearing required PPE in the area where you are working. About ProStaff Workforce Solutions We are a fast growing and successful agency that treats all its clients and candidates with a personal touch. ProStaff Workforce Solutions is a group of industry experts-many hailing from larger agencies-who know their business well and enjoy working in a more hands-on and flexible environment, with attention to detail. Our mission is to match quality people with quality jobs and quality companies to maximize productivity and profitability. We develop long-term relationships and provide a level of customer service and expertise that instill confidence and trust in our client companies and candidates. Our Values • Integrity • Commitment • Quality • Diversity Benefits for eligible employees • Direct deposit • Weekly pay • Medical benefits • 401(k) Plan Please visit us at https://www.prostaffworkforce.com/ to explore all opportunities. #ps #IND3

Resillion US, LLC. is a leading content QC company that works with major streaming services and entertainment platforms to bring diverse stories to a global audience. We value precision, inclusivity, and creativity in delivering the best viewing experience to subscribers all around the world. One of our specialties focused on preserving and revitalizing iconic content for audiences around the world. We are passionate about blending artistry with state-of-the-art technology to restore classic films, television shows, and media to their original brilliance while enhancing them for modern viewing standards. Our high-profile projects celebrate the history of entertainment and push the boundaries of digital restoration. Job Description Set up playback devices, QC bays, and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration, and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) The ideal candidate would possess : Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid DaVinci Resolve proficiency, including building files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Salary Range $25.00-27.00 Per Hour Qualifications 3 to 5 years experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information Equal Employment Opportunity - Resillion US, LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, religious creed, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law (such as cancer), genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. Resillion US, LLC management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs and general treatment during employment. All your information will be kept confidential according to EEO guidelines. Disclaimers Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. Resillion does not accept unsolicited headhunter and agency resumes and will not pay fees to any third-party agency. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All offers of employment at Resillion US, LLC. are contingent upon clear results of a thorough background check.