Quality control technician jobs in Jupiter, FL - 240 jobs

Ro is a direct-to-patient healthcare company with a mission of helping patients achieve their health goals by delivering the easiest, most effective care possible. Ro is the only company to offer nationwide telehealth, labs, and pharmacy services. This is enabled by Ro's vertically integrated platform that helps patients achieve their goals through a convenient, end-to-end healthcare experience spanning from diagnosis, to delivery of medication, to ongoing care. Since 2017, Ro has helped millions of patients, including one in every county in the United States, and in 98% of primary care deserts. Ro has been recognized as a Fortune Best Workplace in New York and Health Care for four consecutive years (2021-2024). In 2023, Ro was also named Best Workplace for Parents for the third year in a row. In 2022, Ro was listed as a CNBC Disruptor 50. As a Quality Control (QC) Pharmacy Technician, you will be the on-site subject matter expert for quality control activities at our 503a compounding pharmacy located in Boynton Beach, FL. This role is responsible for quality oversight activities that ensure compounded processes are well documented and that products are handled and tested per facility SOPs. This position will be responsible for record review, raw material receipt and testing, product retains, product sampling and testing, lot release, and environmental monitoring. You will partner closely with pharmacy operations to ensure the pharmacy location maintains a high level of quality and compliance. This role will report to the Manager, Corporate Quality - Pharmacy on the Clinical team. What You'll Do * Support QC oversight for compounding operations. * Assist with development, support implementation, and maintain SOPs, Forms, Work Instructions and other required controlled documents. * Own the finished product retain program, ensuring a sample of each compounded lot is retained per SOP. * Conduct reviews of cleaning logs, compounding records, and other controlled records created throughout the facility. * Assist in root cause investigations and continuous quality improvement initiatives. * Assist in the execution of training on quality topics, functioning as the on-site SME for quality. * Provide Pharmacy Compliance with requests arising from pharmacy inspections. * Ensure the highest quality and cleanliness of the facility and equipment, leading our environmental monitoring program. * Conduct Quality Assurance checks on relevant product batches according to predefined guidelines, reviewing final test results to perform lot release. What You'll Bring to the Team * Bachelor's degree in any science discipline, preferred. * Current pharmacy technician license in Florida or the ability to obtain pharmacy technician licensure, preferred. * At least 3 years experience working in a manufacturing production environment or a high volume compounding pharmacy required. * Experience working in a cGMP or 503B facility where PPE, cleanliness, and sterile sampling techniques are part of daily routine, required. * Experience identifying need for and assisting in the creation of SOPs and other controlled documents. * Knowledge of environmental monitoring in cGMP environments. * Experience with Good Documentation Practices, preferred. * Experience training others, preferred. * Strong attention to detail and ability to think strategically and tactically. * Outstanding written and verbal communication skills. * Irrational passion for building the future of healthcare with an emphasis on quality processes to drive successful patient outcomes. We've Got You Covered * Full medical, dental, and vision insurance + OneMedical membership * Healthcare and Dependent Care FSA * 401(k) with company match * Flexible PTO * Wellbeing + Learning & Growth reimbursements * Paid parental leave + Fertility benefits * Pet insurance * Student loan refinancing * Virtual resources for mindfulness, counseling, and fitness We welcome qualified candidates of all races, creeds, genders, and sexuality to apply. The target hourly rate for this position ranges from $30.43 to $36.78, in addition to a competitive equity and benefits package (as applicable). When determining compensation, we analyze and carefully consider several factors, including location, job-related knowledge, skills and experience. These considerations may cause your compensation to vary. Ro recognizes the power of in-person collaboration, while supporting the flexibility to work anywhere in the United States. For our Ro'ers in the tri-state (NY) area, you will join us at HQ on Tuesdays and Thursdays. For those outside of the tri-state area, you will be able to join in-person collaborations throughout the year (i.e., during team on-sites). At Ro, we believe that our diverse perspectives are our biggest strengths - and that embracing them will create real change in healthcare. As an equal opportunity employer, we provide equal opportunity in all aspects of employment, including recruiting, hiring, compensation, training and promotion, termination, and any other terms and conditions of employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, gender expression, familial status, age, disability and/or any other legally protected classification protected by federal, state, or local law. See our California Privacy Policy here.

Ro is a direct-to-patient healthcare company with a mission of helping patients achieve their health goals by delivering the easiest, most effective care possible. Ro is the only company to offer nationwide telehealth, labs, and pharmacy services. This is enabled by Ro's vertically integrated platform that helps patients achieve their goals through a convenient, end-to-end healthcare experience spanning from diagnosis, to delivery of medication, to ongoing care. Since 2017, Ro has helped millions of patients, including one in every county in the United States, and in 98% of primary care deserts. Ro has been recognized as a Fortune Best Workplace in New York and Health Care for four consecutive years (2021-2024). In 2023, Ro was also named Best Workplace for Parents for the third year in a row. In 2022, Ro was listed as a CNBC Disruptor 50. As a Quality Control (QC) Pharmacy Technician, you will be the on-site subject matter expert for quality control activities at our 503a compounding pharmacy located in Boynton Beach, FL. This role is responsible for quality oversight activities that ensure compounded processes are well documented and that products are handled and tested per facility SOPs. This position will be responsible for record review, raw material receipt and testing, product retains, product sampling and testing, lot release, and environmental monitoring. You will partner closely with pharmacy operations to ensure the pharmacy location maintains a high level of quality and compliance. This role will report to the Manager, Corporate Quality - Pharmacy on the Clinical team.What You'll Do Support QC oversight for compounding operations. Assist with development, support implementation, and maintain SOPs, Forms, Work Instructions and other required controlled documents. Own the finished product retain program, ensuring a sample of each compounded lot is retained per SOP. Conduct reviews of cleaning logs, compounding records, and other controlled records created throughout the facility. Assist in root cause investigations and continuous quality improvement initiatives. Assist in the execution of training on quality topics, functioning as the on-site SME for quality. Provide Pharmacy Compliance with requests arising from pharmacy inspections. Ensure the highest quality and cleanliness of the facility and equipment, leading our environmental monitoring program. Conduct Quality Assurance checks on relevant product batches according to predefined guidelines, reviewing final test results to perform lot release. What You'll Bring to the Team Bachelor's degree in any science discipline, preferred. Current pharmacy technician license in Florida or the ability to obtain pharmacy technician licensure, preferred. At least 3 years experience working in a manufacturing production environment or a high volume compounding pharmacy required. Experience working in a cGMP or 503B facility where PPE, cleanliness, and sterile sampling techniques are part of daily routine, required. Experience identifying need for and assisting in the creation of SOPs and other controlled documents. Knowledge of environmental monitoring in cGMP environments. Experience with Good Documentation Practices, preferred. Experience training others, preferred. Strong attention to detail and ability to think strategically and tactically. Outstanding written and verbal communication skills. Irrational passion for building the future of healthcare with an emphasis on quality processes to drive successful patient outcomes. We've Got You Covered Full medical, dental, and vision insurance + OneMedical membership Healthcare and Dependent Care FSA 401(k) with company match Flexible PTO Wellbeing + Learning & Growth reimbursements Paid parental leave + Fertility benefits Pet insurance Student loan refinancing Virtual resources for mindfulness, counseling, and fitness We welcome qualified candidates of all races, creeds, genders, and sexuality to apply. The target hourly rate for this position ranges from $30.43 to $36.78, in addition to a competitive equity and benefits package (as applicable). When determining compensation, we analyze and carefully consider several factors, including location, job-related knowledge, skills and experience. These considerations may cause your compensation to vary. Ro recognizes the power of in-person collaboration, while supporting the flexibility to work anywhere in the United States. For our Ro'ers in the tri-state (NY) area, you will join us at HQ on Tuesdays and Thursdays. For those outside of the tri-state area, you will be able to join in-person collaborations throughout the year (i.e., during team on-sites). At Ro, we believe that our diverse perspectives are our biggest strengths - and that embracing them will create real change in healthcare. As an equal opportunity employer, we provide equal opportunity in all aspects of employment, including recruiting, hiring, compensation, training and promotion, termination, and any other terms and conditions of employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, gender expression, familial status, age, disability and/or any other legally protected classification protected by federal, state, or local law. See our California Privacy Policy here.

Ro is a direct-to-patient healthcare company with a mission of helping patients achieve their health goals by delivering the easiest, most effective care possible. Ro is the only company to offer nationwide telehealth, labs, and pharmacy services. This is enabled by Ro's vertically integrated platform that helps patients achieve their goals through a convenient, end-to-end healthcare experience spanning from diagnosis, to delivery of medication, to ongoing care. Since 2017, Ro has helped millions of patients, including one in every county in the United States, and in 98% of primary care deserts. Ro has been recognized as a Fortune Best Workplace in New York and Health Care for four consecutive years (2021-2024). In 2023, Ro was also named Best Workplace for Parents for the third year in a row. In 2022, Ro was listed as a CNBC Disruptor 50. As a Quality Control (QC) Pharmacy Technician, you will be the on-site subject matter expert for quality control activities at our 503a compounding pharmacy located in Boynton Beach, FL. This role is responsible for quality oversight activities that ensure compounded processes are well documented and that products are handled and tested per facility SOPs. This position will be responsible for record review, raw material receipt and testing, product retains, product sampling and testing, lot release, and environmental monitoring. You will partner closely with pharmacy operations to ensure the pharmacy location maintains a high level of quality and compliance. This role will report to the Manager, Corporate Quality - Pharmacy on the Clinical team.What You'll Do Support QC oversight for compounding operations. Assist with development, support implementation, and maintain SOPs, Forms, Work Instructions and other required controlled documents. Own the finished product retain program, ensuring a sample of each compounded lot is retained per SOP. Conduct reviews of cleaning logs, compounding records, and other controlled records created throughout the facility. Assist in root cause investigations and continuous quality improvement initiatives. Assist in the execution of training on quality topics, functioning as the on-site SME for quality. Provide Pharmacy Compliance with requests arising from pharmacy inspections. Ensure the highest quality and cleanliness of the facility and equipment, leading our environmental monitoring program. Conduct Quality Assurance checks on relevant product batches according to predefined guidelines, reviewing final test results to perform lot release. What You'll Bring to the Team Bachelor's degree in any science discipline, preferred. Current pharmacy technician license in Florida or the ability to obtain pharmacy technician licensure, preferred. At least 3 years experience working in a manufacturing production environment or a high volume compounding pharmacy required. Experience working in a cGMP or 503B facility where PPE, cleanliness, and sterile sampling techniques are part of daily routine, required. Experience identifying need for and assisting in the creation of SOPs and other controlled documents. Knowledge of environmental monitoring in cGMP environments. Experience with Good Documentation Practices, preferred. Experience training others, preferred. Strong attention to detail and ability to think strategically and tactically. Outstanding written and verbal communication skills. Irrational passion for building the future of healthcare with an emphasis on quality processes to drive successful patient outcomes. We've Got You Covered Full medical, dental, and vision insurance + OneMedical membership Healthcare and Dependent Care FSA 401(k) with company match Flexible PTO Wellbeing + Learning & Growth reimbursements Paid parental leave + Fertility benefits Pet insurance Student loan refinancing Virtual resources for mindfulness, counseling, and fitness We welcome qualified candidates of all races, creeds, genders, and sexuality to apply. The target hourly rate for this position ranges from $30.43 to $36.78, in addition to a competitive equity and benefits package (as applicable). When determining compensation, we analyze and carefully consider several factors, including location, job-related knowledge, skills and experience. These considerations may cause your compensation to vary. Ro recognizes the power of in-person collaboration, while supporting the flexibility to work anywhere in the United States. For our Ro'ers in the tri-state (NY) area, you will join us at HQ on Tuesdays and Thursdays. For those outside of the tri-state area, you will be able to join in-person collaborations throughout the year (i.e., during team on-sites). At Ro, we believe that our diverse perspectives are our biggest strengths - and that embracing them will create real change in healthcare. As an equal opportunity employer, we provide equal opportunity in all aspects of employment, including recruiting, hiring, compensation, training and promotion, termination, and any other terms and conditions of employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, gender expression, familial status, age, disability and/or any other legally protected classification protected by federal, state, or local law. See our California Privacy Policy here.

We are seeking to recruit a Surface Quality Inspector for our location in Jupiter, Florida Strong attention to detail by visually looking at the surface quality of polished optics by using both hands to hold the optic to look thru (transmission) and in reflection to perform the visual inspection of Ø 5mm to Ø 200mm parts. Perform a visual inspection of the optical (glass) lenses against applicable standards ( i.e. ISO10110 and MIL-PRF-13830) using a high intensity light source, or indirect lighting with eye loupes, and/or microscope to identify and find any surface defects (scratches, stains, chips, fractures, etc.) on the lens after polishing or coating. Use the applicable standard to determine if the depth/width of the defect is acceptable or rejected based on the drawing specification. Visual inspection of low/moderate (standard/commercial) grade surface quality requirements (80-50, 60-40 scratch dig equivalent) which are a commonly acceptable cosmetic standards. Perform the inspection of raw glass blanks with documentation and release of material to production. Must be able to use cleaning solvents (alcohol, acetone and others) with special cloth wipes to clean, wipe, and to dissolve and remove any contaminants from the lens before and after inspection. After inspection of the optics, must be able to wrap the lens to protect from scratches, stains, chips, etc. Must be able to follow written and verbal instructions in a reliable and consistent manner. Must accurately document the description of lenses that do not meet the surface quality requirements, segregate the nonconforming parts from acceptable lenses, and to protect the rejected lens before sending to rework (internally or externally) or transferring acceptable lenses to inventory. May use various measuring instruments to measure physical dimension (in mm and inches). Must be able to escalate observed or potential lens quality or process defects to team lead or department supervisor. Must be organized, meticulous and a conscientious worker to minimize mishandling. Lenses inspected are finished product to be built into assemblies that must be handled with utmost care. Maintain contamination control and cleanliness of the area at all times. Proper safety procedures and process controls will be followed at all times when working with solvents, sharp edges and high intensity light sources. Should be an independent worker who can be focused on their responsibilities under minimal supervision with handling and processing parts quickly and efficiently before sending the lenses to coating (outside process), inventory, or to the customer. Work instructions and inspection training to be provided but individual must be able listen and ask questions, refer to the instructions and notes taken, and retain the information provided to reference back. REQUIREMENTS: High School Diploma, some college preferred. General knowledge of reading mechanical or optical blueprints/drawings. Use of measuring equipment such a caliper or dial indicators (mm and inch units). General computer skills and aptitude. Experienced in an ISO 9000 quality system work environment is preferred.

Who we are: Cosmetic Solutions is a leading manufacturer of cosmetic and OTC products, committed to innovation, quality, and continuous improvement. Our Quality Control team plays a vital role in ensuring our products meet the highest standards of safety, efficacy, and compliance. We are seeking a detail-oriented and proactive Quality Control Technician to join our Raw Materials team. This role is essential to maintaining product integrity and regulatory compliance through rigorous testing and documentation practices. Quality Control Lab Technician Major Responsibilities Sample all incoming raw material for Quality control testing Conduct daily quality control testing Water Maintain the raw material standards library Conduct routine and non-routine testing of raw materials, in-process items, and finished goods. Maintain retained sample inventory and storage area. Calibrate and maintain lab equipment (pH meter, viscometer, balances). Review and follow SOPs, specifications, and related documentation. Compile, interpret, and report analytical data. Troubleshoot instruments and initiate investigations for anomalies and deviations. Ensure compliance with GLP, GMP, and SOPs. Document test results accurately in lab notebooks and databases. Collaborate with cross-functional teams to resolve quality issues and implement corrective actions. Participate in writing SOPs, OOS reports, deviations, CAPAs, and investigations. Support sample testing, data entry, and coordination with external labs/vendors. Promote and demonstrate company core values and participate in 6S lean initiatives. Maintain a clean and organized lab environment. Perform other duties as assigned by management. Support the daily execution of the Quality Management System QUALIFICATIONS: Written/oral communication skills required. 2-3 years of experience in the Cosmetic or pharmaceutical industry preferred. Associate's degree or higher in Chemistry, Biology, or a related scientific discipline. Experience & Skills: Experience in cosmetics, pharmaceuticals, or other FDA-regulated industries. Strong knowledge of GLP, GMP, and regulatory standards. Experience in a regulated laboratory environment. Excellent attention to detail and organizational skills. Strong problem-solving and analytical abilities. Effective communication and teamwork skills. Proficiency in Microsoft Office and laboratory data systems. Ability to work independently and manage multiple priorities. Cosmetic Solutions LLC. is committed to equal employment opportunity for all employees and applicants for employment without regard to age, color, creed, disability status, gender, national origin, race, religion, sexual orientation or veteran status, or any other legally protected status.

Forgen is dedicated to building a better future - for generations. Seasonal Position. The Quality Control Technician conducts daily inspections to ensure compliance with company and customer quality standards. They possess the authority to enforce corrective actions for any deficiencies in work, equipment, or materials. Their duties encompass maintaining quality assurance protocols, conducting material testing, and analyzing test results. They execute quality assessments, perform inspections, calibrate equipment, and communicate findings. Furthermore, they manage project document control, prepare submissions meeting project specifications, and interpret plans to ensure project compliance. Forgen Overview Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work. Key Responsibilities This role will include temporary night shift periods. Inspecting the work in progress to assure compliance with the quality control plan and quality criteria as specified in the Contract Documents. Performing quality control sampling and testing during construction or ensuring that outside companies are performing tests according to the specifications. Verifying that the equipment used in testing meets test requirements, that tests are conducted according to procedures and best management practices, and that testing equipment and procedures remain consistent over the duration of the project. Identifying work that does not meet acceptance criteria, documenting defective work, and reporting to the QC Manager. Administering the Inspection Test Plans (ITP). Completing the daily field logs. Taking daily field photographs. Maintaining quality control document files. Inspect all delivered materials to document there are no defects in workmanship, they have the proper identification, are not damaged and delivery is complete. Visual inspection will also include the correct quantity, completeness evidence of compliance with approvals, and proper documentation in accordance with manufacturer's requirements and the contract documents. Monitor delivery, handling, and storage of materials per specifications. Observe that storage facilities are applicable, protective, and secure to prevent damage or contamination to equipment and materials per specifications. Review and maintain any manufacturer material certifications. Pertinent information will be entered, and any non-conformances identified during material inspections will be recorded on a Material Delivery Receipt. Basic Qualifications Degree in an engineering discipline (civil, mechanical, electrical, structural), preferred. Knowledge of mathematics - arithmetic, geometry, calculus, and statistics and their relevant applications. Computer skills especially in the use of Microsoft Word and PowerPoint and the ability to manage files and records effectively. Valid Driver's License and ability to drive on behalf of company business. Preferred Qualifications The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary. 40-Hour HAZWOPER Training 8-Hour OSHA Refresher. Competent Person Safety Training. 30-Hour OSHA Construction Safety Training. EM 385-1-1 Training Physical Demands & Work Environment This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are essential. This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk. Perks and Benefits Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards. Equal Opportunity Forgen is an equal-opportunity employer and prohibits discrimination based on any legally protected status. Privacy Policy At Forgen, we are committed to protecting your privacy. We collect and use your personal data to manage the recruitment process, including assessing your application, verifying information, and, if applicable, entering into an employment contract. Your information may be shared with authorized third parties who perform services on our behalf, such as background checks, and only where permitted by law. We implement appropriate security measures to safeguard your information and retain it only as long as necessary for recruitment and legal purposes. You have the right to access, correct, or request deletion of your data, and to withdraw your consent at any time where applicable. For questions or to exercise your rights, please contact *************. California Privacy Policy Agency Policy

Job DescriptionDescription: Whether you are just starting in your career or are an experienced Call Center Representative, Schumacher Auto Group is the place for you! We have a hands-on management team to help you grow & succeed all while earning the pay you deserve. Keep reading to see how you can join our team at Schumacher Auto Group today! The Customer Quality Department Operator is responsible for handling incoming calls from potential and existing customers, providing information about vehicles, scheduling service appointments, answering questions about financing, and generally promoting the dealership's products and services through phone interactions, aiming to drive sales and customer satisfaction. Essential Job Responsibilities Handles incoming calls for all departments of all Schumacher dealerships. Answers all calls professionally. Transfers to correct departments. Takes messages as necessary and promptly emails internal employees as needed. Answers clients questions such as directions, days/hours of dealerships and other. Attends brand webinars and trainings, staying abreast of current state of automotive industry standards and strategies. Sits and actively answers calls for long periods of time. Other duties as assigned by supervisor. Job Requirements High School diploma or equivalent. Experience providing quality customer service. Ability to read and comprehend written instructions and information in English. Able to work independently and manage time efficiently. Excellent communicator to support relationships with all employees, clients, visitors. Schumacher Auto provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. About Schumacher Automotive Group Schumacher Auto Group is an industry-leading Car Dealership Company with award-winning car brands in the West Palm Beach area, and exceptional team members. We have a strong focus on putting our customers and community first in everything we do. Requirements:

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

QUALITY CONTROL BENCH INSPECTOR Responsibilities include but are not limited to: Reading and adhering to the published Workscope, as revised. Performing Receiving Inspection of incoming engines to identify visual non-conformances on the engines as-received. Documenting discrepancies (Damage Report) and generating Non-Routines, Manila Tags or 227's as required to initiate the repair of the noted discrepancies per SOP 14-006 R1. Performing Incoming & Outgoing Inventory Inspection of LRUs. Perform EMU and/or piece part inspection of disassembled engines, identifying and documenting non-conformances. Recording the status of all inspected parts on the QC 227C (Unserviceable and Serviceable parts alike), and proper routing of parts to restore them to serviceable condition in a timely and accurate manner. Routing parts to Outside Vendors and accurately documenting identification data and work required in Quantum. Also responsible for overseeing maintenance actions in progress and documenting required data on maintenance forms as maintenance actions are accomplished. Minimum Job requirements: Minimum FAA “P” Certificated; 2 years Minimum CF6 engine experience; Ability to navigate the OEM Manuals and to read and understand technical data; must have working knowledge of the Quantum Operating System. Requirements MINIMUM REQUIREMENTS: Must possess a valid FAA A&P or Powerplant Certificate Read & Write English Able to Read and Comprehend OEM Engine Manuals, IPC's, SPM's, AMM's and other Approved Data 2 Years' Experience on CF6 Engines (is a plus) Computer Skills Able to use MS Outlook (Email), Word & Excel Must be COACHABLE (Able to Listen, Learn and Follow Instructions) / Have a Good Attitude / 2 Years with CTS Engines ** Applicants must be U.S. Citizens or Permanent Residents to be considered, we don't have sponsor plans at the moment**

Job DescriptionDescription: Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements: RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.

Full-time Description Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs. Salary Description Hourly, Non-Exempt

The CMM Quality Inspector is responsible for setting up, inspecting and signing off on aerospace components utilizing CMM (Coordinate Measuring Machines) and bench plate equipment. Parts will be inspected to engineering drawings, customer purchase orders, industry standards and specifications. Role requires the ability to obtain a Secret clearance. This is a first shift / hourly / non-exempt position reporting to the Quality Manager. Primary Duties & Responsibilities: Operate CMM machine using established programs, as well as creating new programs using Calypso software. Perform dimensional inspection on product using CMM, calipers, micrometers and height gauges. Perform visual and dimensional inspection on product per procedures. Perform first piece inspection and in-process inspections. Maintain lot integrity. Ensure all First Article Inspection (FAI) packages are properly completed. Must comply with all applicable safety requirements, policies and procedures, while maintaining a clean, safe, and orderly work environment. Must participate in required training, medical monitoring, safety, and health evaluations and programs. Other duties as assigned. Knowledge and Skills: Strong background concerning the usage and care of precision measuring tools and equipment. Ability to effectively read and understand blueprints, engineering documents, purchase orders, inspection manuals and procedures. Strong metrology, blueprint reading, and GD&T interpretation skills. Must be familiar with AS9102 Form and First Article Inspection (FAI). Must have practical experience performing in-process and final inspections. Demonstrates an understanding of related aerospace ISO and AS requirements. Must have experience using various mechanical inspection tools, such as micrometers and calipers. Maintain accuracy and attention to detail at all times and complete tasks in a timely manner. Knowledge of dimensional, visual and mechanical inspection processes. Ability to work with mathematical concepts. Proficiency using Microsoft Word and Excel. Able to apply common sense understanding to carry out work instructions furnished in written, oral or diagram form. Deal with issues involving several concrete variables in standardized situations. Ability to work with little supervision and make intuitive decisions when general instruction is given. Ability to work effectively with others in a team environment. Verbal and written communication skills (in English) Required to twist, turn, kneel, stoop, bend, and use hands to handle or feel. Close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Capable of lifting/moving 35 pounds Experience and Education: U.S. Person status required GED or High School diploma required Machinist certificate is a plus Minimum of 3 years of CMM inspection experience in an aerospace manufacturing environment Location Profile: Located in Port Saint Lucie, Florida, Atlantic Precision Inc (API) is a premier Aerospace Machining & Build facility with a talented work force using the latest 3D printing metal and additive manufacturing technologies in its 50,000 square-foot facility. With decades of experience, API is trusted by OEMs in commercial aviation, military aviation, power generation and the marine industry to produce quality parts for both prototypes and production requirements.

Job DescriptionDuda Farm Fresh Foods, Inc. is a wholly-owned subsidiary of DUDA, established in 2006 to manage the company's legacy fresh produce operations. Capitalizing on a tradition begun in 1926 of growing healthy fresh fruits and vegetables, Duda Farm Fresh Foods offers year-round availability of a wide range of products packed under the Dandy brand. A full-service grower, packer, shipper, marketer, importer and exporter of farm fresh fruits and vegetables and fresh-cut vegetables, its operations are geographically diversified. The Florida-based corporation has production and shipping operations in Florida, California, Arizona, Michigan and Georgia with additional domestic and international locations. Duda Farm Fresh Foods is seeking a FSQA/QC Technician to support food safety and quality programs at our Belle Glade facility. This role ensures compliance with food safety practices, verifies product meets customer specifications, and confirms processing rooms meet standards prior to start-up and throughout production. Key Responsibilities Conduct food safety and quality inspections during production Enforce GMPs and food safety procedures; document non-compliance and corrective actions Verify product quality, labeling, packaging, and date accuracy Perform inventory age reports and collect product samples Calibrate QA tools; monitor water systems, ATP swabs, and metal detection Maintain accurate and organized food safety documentation Collect environmental, equipment, water, and field samples as needed Assist with investigations and follow-up on unusual occurrences Support QA/QC operations at other Duda locations as needed Qualifications High school diploma required 6+ months QA/QC or food safety experience preferred Strong attention to detail and time management skills Basic computer and documentation skills Ability to work independently and in a fast-paced team environment English required; bilingual Spanish preferred Valid driver's license Physical & Work Requirements Ability to lift, push, or pull 50-80 lbs Repetitive bending, standing, and walking Field and facility work required Travel to other locations may be required If you are reliable, detail-oriented, and ready to contribute to a team focused on quality and efficiency, apply and grow with us at Duda Farm Fresh Foods. All applicants must be able to pass a physical, drug test, criminal background check and have valid driver license. The individual should have a great attitude and the ability to learn new things while keeping the interest of our company a priority. We offer an excellent benefit package as part of our total compensation including medical, dental and vision insurance, 401K, flexible spending accounts, paid time off, holiday pay and much more. For more information about A. Duda and Sons, Inc., please visit our website ************* Powered by JazzHR OT8Ipl7Cyo

Job DescriptionRo is a direct-to-patient healthcare company with a mission of helping patients achieve their health goals by delivering the easiest, most effective care possible. Ro is the only company to offer nationwide telehealth, labs, and pharmacy services. This is enabled by Ro's vertically integrated platform that helps patients achieve their goals through a convenient, end-to-end healthcare experience spanning from diagnosis, to delivery of medication, to ongoing care. Since 2017, Ro has helped millions of patients, including one in every county in the United States, and in 98% of primary care deserts. Ro has been recognized as a Fortune Best Workplace in New York and Health Care for four consecutive years (2021-2024). In 2023, Ro was also named Best Workplace for Parents for the third year in a row. In 2022, Ro was listed as a CNBC Disruptor 50. As a Quality Control (QC) Pharmacy Technician, you will be the on-site subject matter expert for quality control activities at our 503a compounding pharmacy located in Boynton Beach, FL. This role is responsible for quality oversight activities that ensure compounded processes are well documented and that products are handled and tested per facility SOPs. This position will be responsible for record review, raw material receipt and testing, product retains, product sampling and testing, lot release, and environmental monitoring. You will partner closely with pharmacy operations to ensure the pharmacy location maintains a high level of quality and compliance. This role will report to the Manager, Corporate Quality - Pharmacy on the Clinical team.What You'll Do Support QC oversight for compounding operations. Assist with development, support implementation, and maintain SOPs, Forms, Work Instructions and other required controlled documents. Own the finished product retain program, ensuring a sample of each compounded lot is retained per SOP. Conduct reviews of cleaning logs, compounding records, and other controlled records created throughout the facility. Assist in root cause investigations and continuous quality improvement initiatives. Assist in the execution of training on quality topics, functioning as the on-site SME for quality. Provide Pharmacy Compliance with requests arising from pharmacy inspections. Ensure the highest quality and cleanliness of the facility and equipment, leading our environmental monitoring program. Conduct Quality Assurance checks on relevant product batches according to predefined guidelines, reviewing final test results to perform lot release. What You'll Bring to the Team Bachelor's degree in any science discipline, preferred. Current pharmacy technician license in Florida or the ability to obtain pharmacy technician licensure, preferred. At least 3 years experience working in a manufacturing production environment or a high volume compounding pharmacy required. Experience working in a cGMP or 503B facility where PPE, cleanliness, and sterile sampling techniques are part of daily routine, required. Experience identifying need for and assisting in the creation of SOPs and other controlled documents. Knowledge of environmental monitoring in cGMP environments. Experience with Good Documentation Practices, preferred. Experience training others, preferred. Strong attention to detail and ability to think strategically and tactically. Outstanding written and verbal communication skills. Irrational passion for building the future of healthcare with an emphasis on quality processes to drive successful patient outcomes. We've Got You Covered Full medical, dental, and vision insurance + OneMedical membership Healthcare and Dependent Care FSA 401(k) with company match Flexible PTO Wellbeing + Learning & Growth reimbursements Paid parental leave + Fertility benefits Pet insurance Student loan refinancing Virtual resources for mindfulness, counseling, and fitness We welcome qualified candidates of all races, creeds, genders, and sexuality to apply. The target hourly rate for this position ranges from $30.43 to $36.78, in addition to a competitive equity and benefits package (as applicable). When determining compensation, we analyze and carefully consider several factors, including location, job-related knowledge, skills and experience. These considerations may cause your compensation to vary. Ro recognizes the power of in-person collaboration, while supporting the flexibility to work anywhere in the United States. For our Ro'ers in the tri-state (NY) area, you will join us at HQ on Tuesdays and Thursdays. For those outside of the tri-state area, you will be able to join in-person collaborations throughout the year (i.e., during team on-sites). At Ro, we believe that our diverse perspectives are our biggest strengths - and that embracing them will create real change in healthcare. As an equal opportunity employer, we provide equal opportunity in all aspects of employment, including recruiting, hiring, compensation, training and promotion, termination, and any other terms and conditions of employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, gender expression, familial status, age, disability and/or any other legally protected classification protected by federal, state, or local law. See our California Privacy Policy here.

We are seeking to recruit a Surface Quality Inspector for our location in Jupiter, Florida Strong attention to detail by visually looking at the surface quality of polished optics by using both hands to hold the optic to look thru (transmission) and in reflection to perform the visual inspection of Ø 5mm to Ø 200mm parts. Perform a visual inspection of the optical (glass) lenses against applicable standards ( i.e. ISO10110 and MIL-PRF-13830) using a high intensity light source, or indirect lighting with eye loupes, and/or microscope to identify and find any surface defects (scratches, stains, chips, fractures, etc.) on the lens after polishing or coating. Use the applicable standard to determine if the depth/width of the defect is acceptable or rejected based on the drawing specification. Visual inspection of low/moderate (standard/commercial) grade surface quality requirements (80-50, 60-40 scratch dig equivalent) which are a commonly acceptable cosmetic standards. Perform the inspection of raw glass blanks with documentation and release of material to production. Must be able to use cleaning solvents (alcohol, acetone and others) with special cloth wipes to clean, wipe, and to dissolve and remove any contaminants from the lens before and after inspection. After inspection of the optics, must be able to wrap the lens to protect from scratches, stains, chips, etc. Must be able to follow written and verbal instructions in a reliable and consistent manner. Must accurately document the description of lenses that do not meet the surface quality requirements, segregate the nonconforming parts from acceptable lenses, and to protect the rejected lens before sending to rework (internally or externally) or transferring acceptable lenses to inventory. May use various measuring instruments to measure physical dimension (in mm and inches). Must be able to escalate observed or potential lens quality or process defects to team lead or department supervisor. Must be organized, meticulous and a conscientious worker to minimize mishandling. Lenses inspected are finished product to be built into assemblies that must be handled with utmost care. Maintain contamination control and cleanliness of the area at all times. Proper safety procedures and process controls will be followed at all times when working with solvents, sharp edges and high intensity light sources. Should be an independent worker who can be focused on their responsibilities under minimal supervision with handling and processing parts quickly and efficiently before sending the lenses to coating (outside process), inventory, or to the customer. Work instructions and inspection training to be provided but individual must be able listen and ask questions, refer to the instructions and notes taken, and retain the information provided to reference back. REQUIREMENTS: High School Diploma, some college preferred. General knowledge of reading mechanical or optical blueprints/drawings. Use of measuring equipment such a caliper or dial indicators (mm and inch units). General computer skills and aptitude. Experienced in an ISO 9000 quality system work environment is preferred.

Job Description Who we are: Cosmetic Solutions is a leading manufacturer of cosmetic and OTC products, committed to innovation, quality, and continuous improvement. Our Quality Control team plays a vital role in ensuring our products meet the highest standards of safety, efficacy, and compliance. We are seeking a detail-oriented and proactive Quality Control Technician to join our Raw Materials team. This role is essential to maintaining product integrity and regulatory compliance through rigorous testing and documentation practices. Quality Control Lab Technician Major Responsibilities Sample all incoming raw material for Quality control testing Conduct daily quality control testing Water Maintain the raw material standards library Conduct routine and non-routine testing of raw materials, in-process items, and finished goods. Maintain retained sample inventory and storage area. Calibrate and maintain lab equipment (pH meter, viscometer, balances). Review and follow SOPs, specifications, and related documentation. Compile, interpret, and report analytical data. Troubleshoot instruments and initiate investigations for anomalies and deviations. Ensure compliance with GLP, GMP, and SOPs. Document test results accurately in lab notebooks and databases. Collaborate with cross-functional teams to resolve quality issues and implement corrective actions. Participate in writing SOPs, OOS reports, deviations, CAPAs, and investigations. Support sample testing, data entry, and coordination with external labs/vendors. Promote and demonstrate company core values and participate in 6S lean initiatives. Maintain a clean and organized lab environment. Perform other duties as assigned by management. Support the daily execution of the Quality Management System QUALIFICATIONS: Written/oral communication skills required. 2-3 years of experience in the Cosmetic or pharmaceutical industry preferred. Associate's degree or higher in Chemistry, Biology, or a related scientific discipline. Experience & Skills: Experience in cosmetics, pharmaceuticals, or other FDA-regulated industries. Strong knowledge of GLP, GMP, and regulatory standards. Experience in a regulated laboratory environment. Excellent attention to detail and organizational skills. Strong problem-solving and analytical abilities. Effective communication and teamwork skills. Proficiency in Microsoft Office and laboratory data systems. Ability to work independently and manage multiple priorities. Cosmetic Solutions LLC. is committed to equal employment opportunity for all employees and applicants for employment without regard to age, color, creed, disability status, gender, national origin, race, religion, sexual orientation or veteran status, or any other legally protected status.

Forgen is dedicated to building a better future - for generations. Seasonal Position. The Quality Control Technician conducts daily inspections to ensure compliance with company and customer quality standards. They possess the authority to enforce corrective actions for any deficiencies in work, equipment, or materials. Their duties encompass maintaining quality assurance protocols, conducting material testing, and analyzing test results. They execute quality assessments, perform inspections, calibrate equipment, and communicate findings. Furthermore, they manage project document control, prepare submissions meeting project specifications, and interpret plans to ensure project compliance. Forgen Overview Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work. Key Responsibilities This role will include temporary night shift periods. Inspecting the work in progress to assure compliance with the quality control plan and quality criteria as specified in the Contract Documents. Performing quality control sampling and testing during construction or ensuring that outside companies are performing tests according to the specifications. Verifying that the equipment used in testing meets test requirements, that tests are conducted according to procedures and best management practices, and that testing equipment and procedures remain consistent over the duration of the project. Identifying work that does not meet acceptance criteria, documenting defective work, and reporting to the QC Manager. Administering the Inspection Test Plans (ITP). Completing the daily field logs. Taking daily field photographs. Maintaining quality control document files. Inspect all delivered materials to document there are no defects in workmanship, they have the proper identification, are not damaged and delivery is complete. Visual inspection will also include the correct quantity, completeness evidence of compliance with approvals, and proper documentation in accordance with manufacturer's requirements and the contract documents. Monitor delivery, handling, and storage of materials per specifications. Observe that storage facilities are applicable, protective, and secure to prevent damage or contamination to equipment and materials per specifications. Review and maintain any manufacturer material certifications. Pertinent information will be entered, and any non-conformances identified during material inspections will be recorded on a Material Delivery Receipt. Basic Qualifications Degree in an engineering discipline (civil, mechanical, electrical, structural), preferred. Knowledge of mathematics - arithmetic, geometry, calculus, and statistics and their relevant applications. Computer skills especially in the use of Microsoft Word and PowerPoint and the ability to manage files and records effectively. Valid Driver's License and ability to drive on behalf of company business. Preferred Qualifications The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary. 40-Hour HAZWOPER Training 8-Hour OSHA Refresher. Competent Person Safety Training. 30-Hour OSHA Construction Safety Training. EM 385-1-1 Training Physical Demands & Work Environment This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are essential. This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk. Perks and Benefits Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards. Equal Opportunity Forgen is an equal-opportunity employer and prohibits discrimination based on any legally protected status. Privacy Policy At Forgen, we are committed to protecting your privacy. We collect and use your personal data to manage the recruitment process, including assessing your application, verifying information, and, if applicable, entering into an employment contract. Your information may be shared with authorized third parties who perform services on our behalf, such as background checks, and only where permitted by law. We implement appropriate security measures to safeguard your information and retain it only as long as necessary for recruitment and legal purposes. You have the right to access, correct, or request deletion of your data, and to withdraw your consent at any time where applicable. For questions or to exercise your rights, please contact *************. California Privacy Policy Agency Policy

Job DescriptionDescription: QUALITY CONTROL BENCH INSPECTOR Responsibilities include but are not limited to: Reading and adhering to the published Workscope, as revised. Performing Receiving Inspection of incoming engines to identify visual non-conformances on the engines as-received. Documenting discrepancies (Damage Report) and generating Non-Routines, Manila Tags or 227's as required to initiate the repair of the noted discrepancies per SOP 14-006 R1. Performing Incoming & Outgoing Inventory Inspection of LRUs. Perform EMU and/or piece part inspection of disassembled engines, identifying and documenting non-conformances. Recording the status of all inspected parts on the QC 227C (Unserviceable and Serviceable parts alike), and proper routing of parts to restore them to serviceable condition in a timely and accurate manner. Routing parts to Outside Vendors and accurately documenting identification data and work required in Quantum. Also responsible for overseeing maintenance actions in progress and documenting required data on maintenance forms as maintenance actions are accomplished. Minimum Job requirements: Minimum FAA “P” Certificated; 2 years Minimum CF6 engine experience; Ability to navigate the OEM Manuals and to read and understand technical data; must have working knowledge of the Quantum Operating System. Requirements: MINIMUM REQUIREMENTS: Must possess a valid FAA A&P or Powerplant Certificate Read & Write English Able to Read and Comprehend OEM Engine Manuals, IPC's, SPM's, AMM's and other Approved Data 2 Years' Experience on CF6 Engines (is a plus) Computer Skills Able to use MS Outlook (Email), Word & Excel Must be COACHABLE (Able to Listen, Learn and Follow Instructions) / Have a Good Attitude / 2 Years with CTS Engines ** Applicants must be U.S. Citizens or Permanent Residents to be considered, we don't have sponsor plans at the moment**

Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.