Quality control technician jobs in Kenner, LA

Applying for this role is straight forward Scroll down and click on Apply to be considered for this position. The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. xevrcyc Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: MULTIPLE SHIFTS AVAILABLE Work Type: Per Diem As Needed

Do you enjoy being active throughout the day? How about being a part of something really important? If so, this job is for you! The Cage Processing Technician is a critical role that supports animal research at Tulane. This is also great opportunity if you are interested in a career path and growth potential. Job Responsibilities: * Operates mechanical cage washing equipment, autoclaves and other sanitizing equipment. * Loads assembled cages onto transport racks in preparation for sterilization by steam autoclave. * Provides basic cage wash duties including the processing of all caging material through mechanical cage and rack washers * Maintains cagewash facilities in a clean and organized manner * Maintains facility equipment and performs routine preventative maintenance on cagewash and autoclaves * Disposes of waste materials in a safe and thorough manner as required * Sweeps, mops and disinfects cage wash areas at the end of each shift NOTE: To provide necessary care for the animals, this position is required to be available on weekends and holidays. This position is considered essential personnel in the event of an emergency. * Ability to understand and follow detailed oral and written instructions. * Ability to read and write in order to maintain records, read instructions, labels, etc. * Ability to work a flexible schedule including weekends and holidays. * Ability to work under environmental conditions that require the use of safety equipment. * Ability to interact and work with faculty, students, staff, and visitors in a respectful and courteous manner * Ability to maintain confidentiality in all work performed * Ability to lift items weighting up to 50 pounds and push items weighing up to 200 pounds; able to stand for extended periods of time. * Ability to use industrial equipment such as pallet jacks, floor scrubbing machines, cage and rack washers, and autoclaves * Ability to complete and pass successfully the required occupational health screening referenced in the University's Animal Handler Health Surveillance Program on an annual basis * High School Diploma or equivalent.N/A

Quality Assurance Technician - Join the DFS Family! ________________________________________ Why Join Us? At Diversified Foods and Seasonings (a division of Al Copeland Investments), we produce millions of pounds of top-quality, kettle-cooked side dishes and gravies annually, serving restaurants across the U.S. and globally. We are proud of our product and our team, and we're looking for a dedicated Quality Assurance Technician to join us in Madisonville, LA! ________________________________________ What You'll Do As a Quality Assurance Technician, you'll be a key part of our quality team, ensuring food safety, quality, and efficiency. • Conduct routine inspections of raw materials, in-process products, and finished goods to ensure they meet quality standards. • Conduct on-site tests, such as pH, temperature, and texture, to verify quality during various production stages. • Maintain accurate, detailed records of quality checks, test results, and any deviations from standards • Maintain clear, effective communication with coworkers and supervisors. • Ensure that the workspace is always clean and meets GMP, HACCP, and SSOP standards. • Perform additional duties as assigned to contribute to smooth, efficient production. ________________________________________ What You Bring • Experience in quality assurance in a manufacturing environment. • Basic math and reading skills. • Physical capability to stand for 10 hours, lift 50 pounds, bend, stoop, kneel, and work in fast-paced conditions. • Flexibility to work overtime and occasional weekends. • Must pass a drug screen. ________________________________________ Our Benefits We offer a supportive environment and an excellent benefits package, including: • 401(k) with employer match • Medical, Dental, Vision, Disability Insurance, and Life Insurance • Temperature Controlled Environment • 12 Paid Holidays • Paid Time Off • Flexible Hours • Free Lunch Daily • Annual Performance Pay Increase • Birthday and Anniversary Recognition

Job Description ECO affiliate International Marine Systems is looking to hire a Light Machinist/Production Tech. Use hand tools to complete light machine work. Drill based on drawings provided with precision. Ready and understand drawings provided. Review equipment and verify quality and functionality. Requirements: 21 years of age Clean driving record required Accurately measure using ruler/tape measure Operate hand tools Able to lift 50lbs Electrical background preferred Able to read drawings with measurements The Edison Chouest Offshore family of companies is committed to ensuring all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law with regard to any employment practices. We are dedicated to ensuring all employees are treated with the utmost level of respect as we believe this is the strongest foundation to build upon to foster an environment where employees feel comfortable handling their assignments, sharing their ideas, and pointing out opportunities for improvement. ECO offers competitive pay and a comprehensive benefits package including a 401(k) match. Powered by ExactHire:184261

Production Technician-25002305 Description Job Overview: Under direction of facility management, the Production Technician will be responsible for a variety of complex operations and duties in the production facility. The Production Technician will be responsible for operating a steam-methane reforming (SMR) facility while meeting all safety, environmental, corporate, efficiency and production requirements. Responsibilities: Obtain knowledge required to operate and troubleshoot the various types of equipment associated with Steam Methane Reformers. Top fired heater ReactorsHigh pressure steam system Pressure swing adsorption unit. Pumps and compressors Analytical equipment Drums and knockout pots Cooling water system Instrument air system. Flare operations. H2 Product delivery Monitor the Process. This includes making rounds, completing reading sheets, water sampling and ensuring environmental permit limit and process limits are adhered to. Learn how to identify hazards, safe out equipment, and write safe work permits. Learn the importance of Housekeeping. Work shift work and cover overtime when needed. Qualifications Qualifications: Effectively communicate with fellow operators, technicians, engineers, and managers Adhere to all Corporate and Plant policies. Maintain the highest degree of personal safety, and environmental accountability at all-times. Maintain high standards of housekeeping. Participate in daily and monthly safety and production meetings. Strong mechanical aptitude. Willingness to progress into a process operator position. Ability to lift and carry up to 50 pounds without assistance. Ability to work from heights. About Linde:Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture:At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit www. linde. com. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-LL1Primary Location Louisiana-NorcoSchedule Full-time Job - OperationsUnposting Date Ongoing

Complete all scheduled production services in an accurate and timely manner to ensure client satisfaction and operational efficiency. Update, maintain, and complete all required orders, records and forms in a timely manner. Deliver, install, operate, and retrieve all audio, video, lighting, rigging and other production equipment. Assist in the coordination and interfacing of outside vendor equipment. Assist clients and in-house personnel in the operation of equipment. Assist clients and in-house personnel in conducting virtual or hybrid meetings. Professionally interface with clients and in-house personnel regarding technical requirements. Act as a supportive liaison to other departments, vendors and clients. Troubleshoot, analyze, diagnose and repair complex audio, A/V and lighting systems in order to minimize down time and improve responsiveness. Monitor, secure and issue production equipment to MCCNO personnel and clients to allow for efficient work processes and successful events. Account for and ensure that equipment is returned undamaged to help maintain costs and aid in the comprehensive equipment management of the department. Perform routine walk- throughs of meeting rooms and conference areas to ensure the proper security of equipment. Assist in the training and development of part-time personnel to accurately and efficiently perform departmental job duties building a share knowledge base.

Join our team as a QUALITY TECHNICIAN and be responsible for ensuring all Reily Foods products meet all our customer and regulatory standards! We're family owned and have a passion for flavor providing iconic coffee and tea beverages that have created memories for over 120 years! Hours: 1st shift 4:30am - 3:00pm Responsibilities: Conduct routine inspections of raw materials, in-process production, and finished goods Perform quality tests and analyses using appropriate tools and equipment Utilize Digital Production System (Redzone) to complete quality compliance documents Monitor and ensure production checks are completed for specified area Collaborate with production team to address quality concerns and implement corrective actions Calibrate and use all quality equipment for specified area Learn and maintain customer standards for product specifications and acceptable quality Assist in cupping and other lab functions Support and comply with good manufacturing practices (GMP's) Other duties as assigned * High school diploma or GED * Machine quality or food production experience preferred * Knowledge of GFSI audit schemes, such as BRC and SQF and understanding of legal food safety requirements * Technical skills include the ability to calibrate testing equipment, using RedZone manufacturing software, and become certified in Quality areas * Interpersonal skills include good verbal and written communication, good time management skills, strong attention to details with ability to follow standardized procedures * Leadership skills include a positive attitude, being a team player and self-leadership Benefits include health insurance, 401k, LTD, paid vacation and holidays! Reily Foods Company is an equal opportunity employer, Minorities/Females/Disability/Protected Veteran/Sexual Orientation/Gender Identity.

We currently have an immediate opening for an experienced Concrete Quality Control Technician to join our growing team. This position requires a detail oriented, customer service minded individual who can thrive in a fast-paced environment. The primary responsibility of this position is to ensure the highest level of quality control in the production of our ready-mix products at our plants and customer job sites under the direction of the Quality Control Manager. Key Responsibilities (Essential Duties and Functions): Test and monitor concrete at various plant and jobsites in to assure performance meets company, industry and customer standards and delivery goals. Perform ACI and/ or LA DOTD quality control tests on aggregate and concrete products, including but not limited to: Field testing (slump, air content, unit weight, yield, cylinders, etc.), gradations on production aggregates, and lab work (compression testing and scheduling). Mixes and test trial batches. Maintain lab area and lab equipment according to industry quality control standards. Observe and record placement, sampling and testing abnormalities. Working on construction sites and at ready-mixed concrete production facilities. Maintain strong communication with dispatch, sales and production personnel throughout the placement. Provide customer support onsite during the concrete placement. Inspecting concrete prior to delivery and at the project site for product conformance with project specifications. Sample and test plastic and hardened ready mixed concrete. Cast, cure and transport concrete specimens. Conduct on-site visual inspections of concrete being delivered. Assist delivery drivers at the plant and onsite. Assist production personnel at plant locations. Observe and record performance, sampling and test abnormalities. Follow all company safety regulations and policies at all times. Performs other job-related duties as assigned by supervisor or other management employees. Requirements Other Requirements: Currently or have the ability to obtain ACI & LADOT field technician certifications within 1 year. Current certifications strongly preferred. Punctuality, attendance, and dependability is essential in this role. Problem solving and rapid decision-making abilities. Working computer knowledge; including applicable Microsoft software. Excellent communication and organizational skills. Current, valid driver's license. Minimum of 1 year experience in a quality control position. Must be able to handle multiple tasks in a fast-paced environment. General knowledge of concrete mixes, its components, additives, and raw materials preferred. Ability to accurately perform basic mathematical functions including area, volume, unit weight, and total weight computations. Ability to accurately understand, analyze, and interpret information. Ability to work as part of a team. Ability to accept and follow direction as provided by managers and ask questions when needed. Able and willing to work varying shifts including early mornings, late afternoons, and weekends.

Temp Great Opportunity with a local growing Overview: Kenner, Louisiana: Flexforce Pros is looking to hire a Quality Inspector II for Shift 1 in Department 1461 Quality Test, offering $21.55/hr. This position requires a High School diploma or equivalent, with additional certifications or training in quality control considered a plus. The ideal candidate will have prior experience in industrial manufacturing, with specific skills in reading electrical schematics, and extensive familiarity with testing equipment and measurement tools, including proficiency with a multimeter. Knowledge of both A/C and D/C electricity is essential, as is experience in troubleshooting electrical circuits using schematics and multimeters. The role demands the ability to work both independently and as part of a team, along with strong problem-solving skills and the capacity to perform root cause analysis. Essential Duties: • Read and interpret electrical schematics • Utilize testing equipment and measurement tools effectively, with required experience using a multimeter • Demonstrate knowledge and experience in both A/C and D/C electricity • Troubleshoot electrical circuits using schematics and a multimeter • Work independently and collaboratively within a team environment • Employ problem-solving skills to perform root cause analysis Requirements/Skills: • High School diploma or equivalent • Additional certifications or training in quality control preferred • Previous experience in industrial manufacturing highly desirable • Experience with electrical schematics and troubleshooting • Familiarity with testing equipment and measurement tools, including multimeters • Knowledge and experience in both A/C and D/C electricity • Ability to work independently and in a team • Strong problem-solving skills and ability to perform root cause analysis SHARE Equal Opportunity Statement: FFlexforce Pros is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status

New Orleans, LA: Flexicrew Technical Services (FTS) is seeking a detail-oriented and skilled Quality Control Technician with strong electrical knowledge to join our team. The ideal candidate will have experience in industrial manufacturing, troubleshooting electrical circuits, and use testing equipment to ensure product quality and compliance with standards. Essential Duties: Perform inspections and quality checks on products, components, and systems. Read and interpret electrical schematics to support testing and troubleshooting. Utilize testing equipment and measurement tools, including multimeters, to verify product specifications. Diagnose and troubleshoot A/C and D/C electrical circuits using schematics and testing tools. Conduct root cause analysis and recommend corrective actions to resolve quality issues. Document inspection results, test findings, and corrective actions accurately. Collaborate with production and engineering teams to maintain product standards and resolve issues. Maintain compliance with safety procedures and quality standards. Requirements/Skills: Previous experience in industrial manufacturing highly desirable. Strong knowledge of A/C and D/C electricity. Proficiency with testing equipment, specifically multimeters. Ability to read and interpret electrical schematics. Experience troubleshooting electrical circuits using schematics and test equipment. Strong problem-solving skills with the ability to perform root cause analysis. Ability to work independently and as part of a team. Physical Requirements: Ability to stand and walk for extended periods (8-12 hour shifts). Ability to bend, stoop, reach, and climb as needed to perform job duties. Regularly lift, carry, push, or pull materials and products (up to 50 lbs). Education: High school diploma or equivalent required; additional certifications or training in quality control preferred. Equal Opportunity Statement: Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age,

Cath Lab Tech Location: Metairie, LA Agency: Titan Medical Group Pay: $2,721 to $2,921 per week Shift Information: Days - 4 days x 10 hours Contract Duration: 13 Weeks Start Date: ASAP AlliedTravelCareers is working with Titan Medical Group to find a qualified Cath Lab Tech in Metairie, Louisiana, 70001! Travel - Cath Lab Tech Weekly Gross Pay: $2721 - $2921 Location: Metairie, LA, United States Start date: 01-13-2026 Assignment length: 13 Weeks weeks Minimum years of experience: 2 - previous travel experience is not required Job type: Traveler Shift: Day (4x10) Certifications: BCLS/BLS - American Heart Association/ARRT(R)/RCIS Cath Lab Tech - Metairie, LA Pay: $2,921 Gross Weekly Start: 12/30/2025 | ⏳ Duration: 13 Weeks Shift: Days 4x10 (7:00 AM - 5:30 PM) Location: 4200 Houma Blvd, Metairie, LA 70006 Contact: Broc Bettell Call: 866.332.9600 ext.1052 | Text: (531) 208-0904 Position Highlights • Experience: 2 years required (3 years preferred) • Certifications: ARRT or RCIS + BLS + LSRT (Temp LSRT accepted) • Systems: Epic required • Modalities Covered: - Invasive Cardiology - Electrophysiology - Vascular (preferred but not required) • ⚙ Key Procedures/Skills: - PCI, stents, right/left heart caths - Pacemakers & AICDs - Ablations - Peripheral interventions - Paracentesis, thoracentesis, liver biopsy - Vascular studies (upper/lower extremity, Abd/Pelvic) - Venous access, hemodynamic monitoring - IR procedures (preferred): embolization, fistulagrams/declots • Equipment: - Required: Philips single-plane - Preferred: Siemens, bi-plane • Float: No • Call: Yes (5-8 shifts depending on staffing) • Weekends: 1 shift every 5 weeks • RTO: Minimize requests between Feb 13-22 (Mardi Gras) • Travel Experience: Not required Fun Things To Do in Metairie, LA Mardi Gras Parades - One of the best parade routes in Louisiana Drago's Seafood - Famous for their charbroiled oysters Lafreniere Park - Trails, birds, fountains & wide-open green space Lakeside Shopping Center - One of the largest malls in the region Live Music in Fat City - Local bars & venues with great nightlife Morning Call Coffee Stand - Beignets + café au lait classics About Titan Medical Group We Take Care of You. While the availability of medical technicians and professionals becomes increasingly limited, there seems to be no shortage of staffing firms. That's why Titan Medical works hard to distinguish itself through our responsiveness, our candidates and our attentiveness to your individual needs. When we say, “We take care of you.” We mean it - both to the medical professionals we represent and the healthcare organizations that rely on us for quality candidates. Founded by experienced medical professional recruiters and healthcare human resource professionals, Titan Medical was created as an alternative to other staffing resources. We found that by focusing on the needs of the individuals we served, we were able to attract higher quality candidates and clients in need of their services. It's a risk that paid off, making Titan Medical one of the leading medical professional staffing firms in the country. Our candidates include the very best in the fields of radiation oncology, rehabilitation, respiratory care, radiology services, nursing and medical laboratory have to offer. Our clients represent the broad diversity of the healthcare industry today - from leading national and regional healthcare centers to traditional hospitals, specialty care clinics and other centers of care. 11112792EXPPLAT

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: * Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. * Apply technical knowledge and expertise in determining proper equipment installation and operation. * Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. * Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. * Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. * Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data. * Review and approve locally developed procedures and solutions to complex repair situations. * Perform analysis of defects and interprets quality control rejection and failure trends. * Monitor safety, training, and certification requirements. * Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. * Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. * Maintain Quality, Safety, Training and Certification Records. * Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. * Inspect forms and records related to aircraft maintenance. * The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. * The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. * Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. * Document maintenance as per Quality Assurance (QA) and established regulatory requirements. * Comply with work order timekeeping system procedures. * Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. * Perform weekly Foreign Object Damage (FOD) walk-downs. * Maintain situational awareness, stay cognitive-focused, and mitigate risks. * Comply with processes and procedures as per DHS/DOD documents and publications. * Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. * Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. * Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. * Perform weekly break room and smoking area cleaning duties. * Perform other duties as assigned. Minimum Requirements: * Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. * High School Diploma or equivalent is required. * Five (5) years of experience in aircraft maintenance. * Valid Airframe and Power Plant (A&P) License required. * Valid FAA Inspection Authorization (IA) required. * Ability to obtain a government flight line driver's license. * Possess a valid United States driver's license. * Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. * Ability to read and interpret data is required. * Ability to read, write, speak and understand English. Physical Requirements/Working Environment: * Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. * Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. * Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. * Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. * May be required to work night shifts. * May work in Aircraft maintenance hangar or outside. * Some domestic travel may be required Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. Role overview: To do inspections regarding quality of work that was performed at the site. This is achieved by documenting by visual, hands on or regulatory standarads. Position Responsibilities: Hands on inspection, on the quality of work performed at the site Document any rework that may need to be performed Conduct in-service and final inspection of repair and testing of portable tanks in a production environment Inspect completed preparations of portable tanks for loading Verify all inspections meet or exceed customer and regulatory standards Watch for Safety related issues and report to the Supervisor Direct employees to wear the required PPE Other duties as assigned Qualifications: 2 years working in an industrial setting Knowledge of Tank regulations - Must Have Strong organizational skills Ability to prioritize Possess strong verbal and written communication skills Computer literacy required High School Diploma or GED required LOCATION: Chalmette, LA DCI Benefits: Medical, dental and vision Insurance 401(k) with generous employer match Paid time off, including 10 paid holidays Optional health savings account & flexible spending account Life insurance Employee assistance program Parental leave Referral program Tuition reimbursement

At Dow, we believe in putting people first and we're passionate about delivering integrity, respect and safety to our customers, our employees and the planet. Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We're a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you're looking for a challenge and meaningful role, you're in the right place. Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 30 countries and employ approximately 36,000 people. Dow delivered sales of approximately $43 billion in 2024. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ About you and this role Dow has an exciting opportunity for an Associate Analytical Technician in Hahnville, LA. The Analytical Technician provides the analytical data to produce and release products and enable process and product optimization. This role supports a plant MPQ (Manage Product Quality) lab. Responsibilities Perform routine and non-routine analyses on analytical equipment such as Gas Chromatography (GC), titrations, and spectrometry. Document, communicate, and archive results using appropriate IT software and electronic tools (such as Chromatography Data Systems (OpenLab). Understand and execute procedures, policies, and work processes such as Environmental Health &Safety, Operating Discipline Management Systems (ODMS), quality procedures, and AWP (Analytical Work Process). Perform basic calibration and maintenance of analytical systems. Monitor analytical systems. Required Qualifications A minimum of an associate's degree in a science discipline or related (at least 20 hours in chemistry) is required. 3+ years of relevant military experience also accepted. Bachelor's degree in science related discipline is preferred. Proficient in Microsoft products, including Outlook, Word and Excel. Able to work in an empowered team environment. Strong verbal and written communication skills. Able to work a 12 hour rotation shift. This is a 12 hour rotating shift position that will require some additional overtime to cover plant needs and lab team vacations/absences. Able to work weekends and holidays. No routine travel. Must possess a TWIC card or be eligible to obtain a TWIC card. For information on TWIC eligibility requirements, please see: ************************************* (If unable to access link, copy and paste in your browser). A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. Physical Requirements Able to meet the following physical demands of the job, with or without reasonable accommodations Lift, push, and pull. Frequent bending, reaching, and lifting. Stand 50% of the time. Walk for extended periods of time. Wear all required personal protective equipment, including but not limited to respirator. Work in an area with hazardous materials. Preferred Qualifications Experience with electronic tools (such as Chromatographic Data System (OpenLab). Experience with Analytical Disciplines such as Chromatography, Spectroscopy, titrations, and physical property testing. Your Skills Analytical Instrumentation Proficiency: Ability to perform routine and non-routine analyses using tools like Gas Chromatography (GC), titrations, and spectrometry. Technical Documentation & IT Tools: Skilled in documenting and communicating results using Chromatography Data Systems (e.g., OpenLab) and Microsoft Office tools like Outlook, Word, and Excel. Process & Safety Compliance: Understanding and execution of procedures related to Environmental Health & Safety, Operating Discipline Management Systems (ODMS), and Analytical Work Processes (AWP). Equipment Maintenance: Capable of performing basic calibration and maintenance of analytical systems and monitoring their performance. Teamwork & Communication: Strong verbal and written communication skills and the ability to work effectively in an empowered team environment, including on rotating shifts, weekends, and holidays. Additional Notes This position does not offer relocation assistance. Benefits - What Dow offers you We invest in you. Dow invests in total rewards programs to help you manage all aspects of you: your pay, your health, your life, your future, and your career. You bring your background, talent, and perspective to work every day. Dow rewards that commitment by investing in your total wellbeing. Here are just a few highlights of what you would be offered as a Dow employee: Equitable and market-competitive base pay and bonus opportunity across our global markets, along with locally relevant incentives. Benefits and programs to support your physical, mental, financial, and social well-being, to help you get the care you need...when you need it. Competitive retirement program that may include company-provided benefits, savings opportunities, financial planning, and educational resources to help you achieve your long term financial-goals. Employee stock purchase programs (availability varies depending on location). Student Debt Retirement Savings Match Program (U.S. only). Dow will take the value of monthly student debt payments and apply them as if they are contributions to the Employees' Savings Plan (401(k)), helping employees reach the Company match. Robust medical and life insurance packages that offer a variety of coverage options to meet your individual needs. Travel insurance is also available in certain countries/locations. Opportunities to learn and grow through training and mentoring, work experiences, community involvement and team building. Workplace culture empowering role-based flexibility to maximize personal productivity and balance personal needs. Competitive yearly vacation allowance. Paid time off for new parents (birthing and non-birthing, including adoptive and foster parents). Paid time off to care for family members who are sick or injured. Paid time off to support volunteering and Employee Resource Group's (ERG) participation. Wellbeing Portal for all Dow employees, our one-stop shop to promote wellbeing, empowering employees to take ownership of their entire wellbeing journey. On-site fitness facilities to help stay healthy and active (availability varies depending on location). Employee discounts for online shopping, cinema tickets, gym memberships and more. Additionally, some of our locations might offer: Transportation allowance (availability varies depending on location) Meal subsidiaries/vouchers (availability varies depending on location) Carbon-neutral transportation incentives e.g. bike to work (availability varies depending on location) Join our team, we can make a difference together. About Dow Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 30 countries and employ approximately 36,000 people. Dow delivered sales of approximately $43 billion in 2024. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ As part of our dedication to inclusion, Dow is committed to equal opportunities in employment. We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on ************ Dow is an Equal Employment Opportunity employer and is committed to providing opportunities without regard for race, color, religion, sex, including pregnancy, sexual orientation, or gender identity, national origin, age, disability and genetic information, including family medical history. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may call us at 1-833-My Dow HR ************** and select option 8.

Learns to perform routine duties associated with cage washing, sanitation, and preparation for use in a research setting including, cage prep, assembly, monitoring equipment for proper function, maintaining sanitary conditions and minor cage maintenance. Operates cage washers and ensures that equipment is in proper working order. Performs related responsibilities as required. Employees in this classification may be required to work with, take specific cautions against and/or be immunized against potentially hazardous agents. Required to work weekend and holiday and emergency work schedule. This position is considered essential personnel. May be designated as essential personnel during a storm/natural disaster. If required to work during a closure, employee must provide accurate and current contact information and is responsible for maintaining communication with supervisor. Failure to report to work when requested by supervisor will result in disciplinary action as outlined by the Staff Handbook. Failure to meet established performance standards in the performance of the job duties and responsibilities outlined in this job description (or as otherwise assigned); and/or failure to interact courteously and tactfully with managers, co-workers, customers and/or vendors such that productivity or departmental morale suffers will result in management's taking the appropriate disciplinary action as outlined in the Staff Handbook. Employee attendance must meet established work schedules. Faithfulness in coming to work, being on time, planning absences in advance when possible, and calling in when unavoidably detained from reporting for work is an essential requirement of the job. * Possess Solid analytical skills and attention to detail * Possess excellent verbal and written communication skills * Possess excellent organizational skills * 4.Possess excellent interpersonal skills * Ability to multi-task and prioritize work assignments * Ability to maintain confidentiality in all work performed * Ability to follow oral and written instructions * Ability to lift items weighting up to 50 pounds and push items weighing up to 200 pounds; able to stand for extended periods of time. * Ability to use industrial equipment such as pallet jacks, floor scrubbing machines and cage and rack washers autoclaves. SPECIAL REQUIRED ABILITY FOR INCUMBENTS WHO HAVE CONTACT OR EXPOSURE TO ANIMALS OR ANIMAL TISSUES: Ability to complete and pass successfully the required occupational health screening referenced in the University's Animal Handler Health Surveillance Program on an annual basis. REQUIRED BACKGROUND CHECK, PHYSICAL, AND DRUG SCREENING FOR INCUMBENTS WHO HAVE CONTACT OR EXPOSURE TO ANIMALS OR ANIMAL TISSUES: Selected candidates must complete and pass a background check and an occupational health screening as a condition of employment. For identified jobs, a drug screening will also be required. The background investigation required occupational health screening, and any required drug screening will be conducted after a conditional employment offer has been extended. * High School Diploma or equivalent.N/A

Under direction of facility management, the Production Technician will be responsible for a variety of complex operations and duties in the production facility. The Production Technician will be responsible for operating a steam-methane reforming (SMR) facility while meeting all safety, environmental, corporate, efficiency and production requirements. Responsibilities: * Obtain knowledge required to operate and troubleshoot the various types of equipment associated with Steam Methane Reformers. * Top fired heater * Reactors * High pressure steam system * Pressure swing adsorption unit. * Pumps and compressors * Analytical equipment * Drums and knockout pots * Cooling water system * Instrument air system. * Flare operations. * H2 Product delivery * Monitor the Process. This includes making rounds, completing reading sheets, water sampling and ensuring environmental permit limit and process limits are adhered to. * Learn how to identify hazards, safe out equipment, and write safe work permits. * Learn the importance of Housekeeping. * Work shift work and cover overtime when needed. Qualifications: * Effectively communicate with fellow operators, technicians, engineers, and managers * Adhere to all Corporate and Plant policies. * Maintain the highest degree of personal safety, and environmental accountability at all-times. * Maintain high standards of housekeeping. * Participate in daily and monthly safety and production meetings. * Strong mechanical aptitude. * Willingness to progress into a process operator position. * Ability to lift and carry up to 50 pounds without assistance. * Ability to work from heights. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-LL1

MAJOR ACCOUNTABILITIES include the following. Other duties may be assigned. Complete all scheduled production services in an accurate and timely manner to ensure client satisfaction and operational efficiency. Update, maintain, and complete all required orders, records and forms in a timely manner. Deliver, install, operate, and retrieve all audio, video, lighting, rigging and other production equipment. Assist in the coordination and interfacing of outside vendor equipment. Assist clients and in-house personnel in the operation of equipment. Assist clients and in-house personnel in conducting virtual or hybrid meetings. Professionally interface with clients and in-house personnel regarding technical requirements. Act as a supportive liaison to other departments, vendors and clients. Troubleshoot, analyze, diagnose and repair complex audio, A/V and lighting systems in order to minimize down time and improve responsiveness. Monitor, secure and issue production equipment to MCCNO personnel and clients to allow for efficient work processes and successful events. Account for and ensure that equipment is returned undamaged to help maintain costs and aid in the comprehensive equipment management of the department. Perform routine walk- throughs of meeting rooms and conference areas to ensure the proper security of equipment. Assist in the training and development of part-time personnel to accurately and efficiently perform departmental job duties building a share knowledge base. Other Skills and Abilities Individual must be willing to work at heights and use lifts. Ability to complete job duties with minimal supervision.

Cath Lab Tech Location: Metairie, LA Agency: Fusion Medical Staffing Pay: $2,464 to $2,833 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/30/2025 AlliedTravelCareers is working with Fusion Medical Staffing to find a qualified Cath Lab Tech in Metairie, Louisiana, 70006! Travel Cath Lab Tech Company: Fusion Medical Staffing Location: Facility in Metairie, Louisiana Job Details Fusion Medical Staffing is seeking a skilled Cath Lab Tech for a 13-week travel assignment in Metairie, Louisiana. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: One year's recent experience as a Cardiac Cath Lab Tech Current BLS (AHA/ARC) certification ARRT, RCES, or RCIS certification Current ACLS (AHA/ARC) certification Preferred Qualifications: Valid Radiologic Technologist license in compliance within state regulations PALS (AHA/ARC) or ENPC Certifications Other certifications and licenses may be required for this position Summary: The Cath Lab Technologist is responsible for assisting in diagnostic and interventional cardiovascular procedures in the cardiac catheterization lab. This role involves preparing patients and equipment, monitoring hemodynamic data, assisting physicians during procedures, and ensuring patient safety throughout the process. The technologist operates specialized imaging equipment, maintains sterile technique, and collaborates with the healthcare team to provide high-quality patient care. This position requires technical expertise in cardiovascular procedures, critical thinking skills, and the ability to work efficiently in high-pressure situations. Essential Work Functions: Prepare and position patients for cardiac catheterization, angioplasty, stent placement, electrophysiology studies, and other interventional procedures Assist physicians during procedures by passing catheters, wires, balloons, and stents, and operating fluoroscopy and hemodynamic monitoring equipment Operate and maintain imaging equipment, contrast injectors, and hemodynamic monitoring systems, ensuring proper functionality Scrub in and assist with sterile field setup, ensuring adherence to infection control and procedural protocols Perform sheath removal and hemostasis using manual compression or closure devices as directed Maintain accurate documentation, including patient records, imaging data, and equipment logs Assist with inventory management, stocking supplies, and ensuring proper storage of sterile instruments and medications Adhere to radiation safety protocols, ensuring proper use of lead aprons, shields, and dosimeters Ensure compliance with hospital policies, safety guidelines, and regulatory requirements Adhere to hospital safety protocols, infection control guidelines, and regulatory standards Perform other duties as assigned within the scope of practice Required Essential Skills: Critical thinking, service excellence, and good interpersonal communication skills The ability to read, write, and communicate in the English language Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail Sensory - Must possess visual acuity and ability to effectively communicate Benefits Include: Highly competitive pay for travel professionals Comprehensive medical, dental, and vision insurance with first day coverage Paid Time Off (PTO) after 1560 hours Life and Short-term disability offered 401(k) matching Aggressive Refer-a-friend Bonus Program 24/7 recruiter support Reimbursement for licensure and CEUs Why Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you - that's why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we're here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Cath Lab Tech with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer About Fusion Medical Staffing Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion staffs a variety of specialties within the nursing and allied healthcare fields. We offer competitive pay packages and the benefits that travelers deserve. We pride ourselves on our communication skills, accurate job transparency, and traveler-first mentality. At Fusion, you can actually choose your own adventure! Fusion started staffing therapists in 2009, and has since expanded to specialties within the nursing, long-term care, home health, cath lab, laboratory, cardiopulmonary, and radiology fields. We continue to seek out the best talent in the healthcare industry. Our travelers provide the hands that help heal and save patients' lives, and they will continue to fill our client's facilities nationwide. Fusion is committed to transparency and putting our traveler's needs, wants, and preferences first; that means having our travelers be in the driver's seat of their own careers. When you put your trust in Fusion, we will help you excel in your career and expand your experience. 11110664EXPPLAT

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements: + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of experience in aircraft maintenance. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Ability to obtain a government flight line driver's license. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .