Quality control technician jobs in Lake Elsinore, CA

RESPONSIBILITIES: Maintain accurate and up‐to‐date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x‐ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION: Perform inspection on complex parts using a wide variety of measuring and test equipment. Adapt and develop complex inspection set‐ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspections, source inspections, and/or complex surface plate set‐ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Recommend changes to supervision. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout all component part characteristics onto rough or semi‐machined castings, forgings and machine parts to maintain control of machining cycle during manufacturing. CALIBRATION: Perform calibration on complex multi‐function electronic measuring and test equipment. Set‐up calibration test conditions having various circuit requirements interpreting calibration procedures, specifications, manufacturer's instructions, or related documents. Ability to interpret drawings and electronic schematics. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired complex electronic equipment. NONDESTRUCTIVE TEST: Perform daily, weekly and monthly equipment and material checks. Perform pre‐inspection and post‐inspection cleaning. Set‐up equipment and conduct tests. Interpret, evaluate and document inspection results in accordance with approved procedures. Perform complete inspections in accordance with applicable specifications, standards and other contractual documents. Operate X‐ray equipment and film processor. Select the method and technique to be used for a specific inspection. Prepare and verify the adequacy of inspection procedures. Job Requirements: Five years related inspection experience or demonstrated ability to perform described responsibilities. Knowledge of applicable military standards or specifications. Required experience in CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Thorough knowledge of machine shop mathematics including trigonometry. Knowledge of electro‐hydraulic servo systems and the computer IEEE systems. Personal hand tools may be required. Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

2882 Whiptail Loop # 100 Carlsbad, CA 92010 T. ************ *************** Job Title: Quality Technician FLSA Status: Non-Exempt Reports To: Quality Supervisor Job Code: Department: 001036 - ZPS Quality Date: May 2025 JOB SUMMARY At Fluidra, our mission is to deliver the Perfect Pool and Wellness Experience to our Customers. The Quality Technician is responsible for inspecting, testing, and evaluating materials, components, and finished products to ensure they meet quality standards and regulatory requirements. This role supports quality control processes, rework, and work closely with warehouse teams to maintain consistent product quality. At Fluidra, we demonstrate our work by modeling our 6 Core Values: Customer Collaboration, Teamwork, Learn & Adapt, Passion for Success, Honesty & Trust, and Excellence & Innovation and we welcome all who share and excel in these values to apply. DUTIES & ESSENTIAL JOB FUNCTIONS • Perform inspections on incoming materials, in-process components, and finished goods.• Conduct visual checks using precision instruments.• Perform functional and performance testing according to established procedures.• Document inspection results, nonconformances, and corrective actions in quality records or databases.• Assist in root-cause analysis and corrective/preventive actions (CAPA).• Read and interpret engineering drawings, specifications, and standards.• Communicate quality issues to supervisors and collaborate with the warehouse team to resolve them.• Assist in continuous improvement initiatives such as Lean, Six Sigma, or 5S activities.• Follow rework instructions and coordinate with Quality and/or Manufacturing teams. QUALIFICATIONS High school diploma or equivalent required, associate degree in technical field preferred. 1-3 years of experience in quality control, inspection, or manufacturing (industry-specific experience beneficial). Ability to read engineering drawings and technical documents. Strong analytical and problem-solving skills. Good communication and documentation skills. Basic computer skills (MS Office, quality software, ERP systems). Operate a forklift (MonoLift Mast Reach Truck); Forklift certification must be obtained upon hire." PHYSICAL REQUIREMENTS While performing the duties of this job, employees are regularly required to read and write, sit, walk within the facility to access file cabinets, documents, stand; talk or hear, both in person and by telephone; use hands repetitively to finger, handle, feel or operate standard office equipment; reach with hands and arms; and lift up to 10 pounds. They also occasionally move objects weighing up to 20 lbs., and sometimes, but rarely, up to 75 lbs. Specific vision abilities required by this job include close vision, distance vision and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this class. Employees work under typical office conditions, and the noise level is usually quiet.

Acuity Inc. (NYSE: AYI) is a market-leading industrial technology company. We use technology to solve problems in spaces, light and more things to come. Through our two business segments, Acuity Brands Lighting (ABL) and Acuity Intelligent Spaces (AIS), we design, manufacture, and bring to market products and services that make a valuable difference in people's lives. We achieve growth through the development of innovative new products and services, including lighting, lighting controls, building management solutions, and an audio, video and control platform. We focus on customer outcomes and drive growth and productivity to increase market share and deliver superior returns. We look to aggressively deploy capital to grow the business and to enter attractive new verticals. Acuity Inc. is based in Atlanta, Georgia, with operations across North America, Europe and Asia. The Company is powered by approximately 13,000 dedicated and talented associates. Visit us at ****************** Work location: * This position requires on-site presence in Oceanside, CA, must report to the office every business day. Job Summary The Quality Control Technician II is responsible for reviewing incoming and in-process products using advanced inspection tools, process and established quality criteria. He/she will verify compliance of products and components through precise measurements with instruments like calipers, micrometers, and digital systems. The role involves documenting inspection results, maintaining digital records, and updating ERP quality documentation. Technicians must communicate findings, quality concerns and escalate quality issues promptly while collaborating with production, engineering, and quality teams. Additionally, they interpret engineering drawings with strong attention to details and support continuous improvement initiatives with a proactive approach. Schedule: Monday to Friday, 6:30am - 3:30pm or 7am -4:00pm Key Tasks & Responsibilities (Essential Functions) * Perform precise inspections using advanced tools (calipers, micrometers, multimeters, gauges, etc.) and

RxSight is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world's first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company's mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: Performs quality functions to support IS013485, FDA, CGMP, Quality System Regulations, management reporting, LAL production/QA/QC, chemistry QA/QC, product release, in-process inspection, incoming inspection, quality process improvements for LDD, manufacturing transfer, and facility support. ESSENTIAL DUTIES AND RESPONSIBILITIES: Read, comprehend, and follow documents related to manufacturing, inspection and quality systems for audits, compliance, and implementation. Audit and approve production records. Verify production process via auditing/observation and testing. Inspect process output and product parameters against specifications. Ensure routine compliance with process steps and proper documentation of records. Maintain raw material lot information, monitor expiration date, and quarantine inventory when materials are expired. Performs incoming inspection on raw materials and incoming sub-assemblies/finished goods. Collect data for process, quality system, manufacturing quality and performance metrics and generate reports for management review. Identify non-conformances, deviations, non-compliance, lack of calibration etc. and propose corrective actions to management. Facilitate Manufacturing Review Board and supports non-conformance decision process. Govern and transact materials physically and through electronic system. Monitors laboratory and engineering equipment to ensure compliance with preventive maintenance and calibration programs. Performs laboratory notebook audits, inventory audits, and maintains QA retains. Take initiatives for the process improvements changes as related to manufactured components and finished products for LAL. Responsible for assisting the Quality Assurance team with any ad hoc reports and assignments as required. Perform incoming inspection and lot control activities of materials and parts. Assist Quality, Manufacturing and R&D groups in running validation, verification, and developmental studies, and defining processes. Development of inspection techniques and transfer to production and everyday use. Monitor gowning and cleanroom logbook check per SOP to ensure all section of the cleaning log has been filled accurately and completely. Provide Good Manufacturing Practices (GMP) and Quality Standard Operating Procedures (SOP) training to relevant department. Create and review First Article Inspection Reports when necessary. Requirements REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Prior experience of working in cleanroom environment and/ or medical device manufacturing is highly preferred. Professional, responsible, energetic, and accountable. Excellent communication skills. Intellectually curious and eager to learn. Individual must be Quality oriented and possess a natural ability to pay attention to details. EDUCATION, EXPERIENCE, and TRAINING: Associate degree (A.A.) or equivalent from a two-year college or technical school; six months to one-year related experience and/or training; or equivalent combination of education and experience. Experience within a medical device company or regulated industry preferred. Microsoft Word; Microsoft Excel Training to be completed per the training plan for this position as maintained in the document control system. The training requirements on TRN-10007 Insider Trading Policy, TRN-10008 Global Anti-Bribery and Anti-Corruption Policy and TRN-10009 Code of Business Conducts and Ethics must be diligently completed within 30 days from the hiring date and on an annual basis COMPUTER SKILLS: Microsoft Word; Microsoft Excel; Microsoft Access; QuickBooks. Notice to Staffing Agencies and Search Firms: RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight's Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances. Salary Description $25.00 to $27.00 per hour

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview: As a Metrology Quality Technician, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: * Develop and implement new programs on PC-DMIS or Polyworks, and Romer Arm to accurately measure parts in accordance with drawing specifications. * Collaborate closely with Quality Engineers to strategize and design programs to meet our production requirements. * Conduct dimensional inspections on parts and assemblies using portable CMM and precision gauges such as micrometers, calipers, and height gauges. * Perform visual inspections of products in line with established procedures. * Execute first piece inspections and monitor quality throughout the production process. * Support the production and supplier quality teams with PPAP projects to ensure compliance and quality standards. * Advocate for safety in all aspects of your work. Who You Are: * Have a strong background in using precision measuring tools and equipment. * Skilled at reading and understanding engineering drawings, standards, and procedures. * Experienced in programming and operating Portable CMMs. * Able to read and interpret drawings and specifications according to ASME Y 14.5 standards. * Practical experience in conducting both in-process and final inspections. * Familiar with a variety of mechanical inspection tools like micrometers and calipers. * Committed to maintaining accuracy and attention to detail while completing tasks efficiently. * Knowledgeable about dimensional, visual, and mechanical inspection processes. * Comfortable using Google Sheets and Docs for reporting. * Capable of working independently and making smart decisions based on general guidance. * Enjoy collaborating with team members to achieve common goals. Minimum Qualifications: * High school diploma or GED. * Minimum 3 years of experience programming/operating CMMs and performing inspections using hand gauges. * PC-DMIS/Polyworks training certificate is a plus. California Pay Range $30 - $40 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

For five decades, HPI Architecture has shaped environments that do more than function, they inspire, support, and enrich lives across generations. Our work bridges people and place, creating meaningful spaces rooted in purpose and designed with intention. Our brand promise reflects who we are: With intention, we approach each project with curiosity, creativity, collaboration, and technical finesse. Fully engaging in the process, we design places that reflect the vision and values of our clients and the people they serve. At HPI, you'll grow through continuing education, mentorship, and professional development, with opportunities to expand your skills and elevate your craft. We also offer a flexible schedule and hybrid work options to support balance, collaboration, creativity, and well‑being. As we embark on the next 50 years, we're seeking an Architectural Specifier / Quality Controller to help uphold the technical excellence, coordination, and material integrity that define our legacy of thoughtful, high-performing design. How You Will Make an Impact: Produce coordinated Project Manuals using CSI formats, developing specifications from Schematic Design through Construction Administration. Conduct thorough product research, evaluate alternatives, maintain vendor relationships, and support teams with material and product selection. Collaborate with Technical Directors and Project Architects to develop and maintain office-wide specification standards. Review drawings, Revit models, and Keynote lists to ensure alignment with specifications, providing clear technical guidance across all project phases. Perform Quality Control reviews at key milestones-evaluating code compliance, accessibility, constructability, life safety, and coordination across disciplines. Use Revit and Bluebeam Sessions to review documentation and confirm comment resolution. Support bidding and construction administration by assisting with RFIs, submittals, and product substitutions. Participate in project and consultant coordination meetings, staying current with building codes, DSA requirements, and industry best practices. Manage multiple active projects simultaneously, maintaining accuracy, consistency, and deadlines. To Be Successful in This Role, You Must: Demonstrate expert knowledge of building systems, construction techniques, materials, and codes. Communicate technical information clearly and collaborate effectively across teams. Be highly organized, detail-oriented, and able to manage multiple deadlines. Bring strong problem-solving abilities and provide thoughtful, solutions-oriented feedback. Work confidently in a fast-paced, multi-project environment. Show initiative in improving standards, documentation practices, and material research. Leverage Revit and Bluebeam to support accurate, coordinated design review processes. To Qualify, You Must Have: A minimum of 10 years of relevant architectural experience, including at least 5 years of specification writing. Experience preparing architectural specifications using AIA MasterSpec. Strong understanding of building codes, materials, construction techniques, and sustainability requirements. Proficiency in Microsoft Office, Bluebeam Revu, and specification editing software. CSI certification preferred. LEED Accreditation and/or CASp certification a plus. Knowledge of DSA requirements preferred. Knowledge of Revit and Revit add-ins for specifications and keynotes a plus. A professional degree in Architecture is a plus. Excellent communication and collaboration skills. Pay, Perks & Benefits Flexible Schedule and Hybrid Work Opportunities Vacation and Sick time Medical, Dental, and Vision Insurance with additional Supplemental Insurance options 401(k) Ongoing professional development with access to continuing education and meaningful mentorship Licensure Assistance Salary Range: $105,000.00 To $135,000.00 Annually Our Core Values CLIENT CENTERED: We're all in-listening first, collaborating closely, anticipating needs, and actively engaging with our project partners and one another. DESIGN EXCELLENCE: We dig deep to uncover the unique needs of our clients-shaping purposeful, inspiring, and enduring spaces for solutions rooted in people. PROFESSIONAL INTEGRITY: We own our role and take pride in our work, delivering an exceptional experience every step of the way that excites. Ready to help shape the next 50 years of meaningful design? We'd love to meet you! Recruiters, please do not contact this job poster.

5th Axis is the world leader in automated production, manufacturing, and machining. We are a turn-key solution provider with a focus on product development, milling, turning, assembly, plating, Are you a creative thinker who loves turning ideas into reality? Ready to tackle exciting challenges and design the future? Join our team of forward-thinkers and shape groundbreaking solutions in an environment that rewards your expertise and passion! Are you a creative thinker who loves turning ideas into reality? Ready to tackle exciting challenges and design the future? Join our team of forward-thinkers and shape groundbreaking solutions in an environment that rewards your expertise and passion! As an Automation Maintenance and Quality Technician, you will play a crucial role in ensuring the efficient operation of our automation systems, maintaining high-quality production standards, and contributing to the overall success of our manufacturing processes. What You Will Do: Perform routine maintenance tasks on CNC machines and automation systems. Clean and maintain the robot, including emptying chips, cleaning, and replacing coolant as needed. Ensure that all equipment is in proper working condition for continuous production. Monitor production processes and make necessary adjustments to maintain efficiency and quality. Perform routine quality checks to ensure parts are within tolerance. Inspect finished parts using micrometers, calipers, and other precision measuring tools. Compare finished parts to blueprints to ensure they meet specified standards. Document and report any deviations or quality issues. Unload and reload materials in the robot to facilitate continuous production. Safely handle and transport materials as required. Maintain detailed records of maintenance activities, production data, and quality control checks. Report any equipment malfunctions, maintenance needs, or quality concerns to the supervisor. Assist with material management as needed Adherence to safety protocols and practices Perform other duties as assigned. Do you have: High school diploma or equivalent; technical certification or degree in a related field is a plus. Proven experience operating CNC machines for at least 2 years. Proficiency in using micrometers, calipers, and other precision measuring tools. Strong blueprint reading skills and the ability to interpret technical drawings. Attention to detail and a commitment to maintaining high-quality standards. Knowledge of robotics and automation technology is advantageous. Excellent problem-solving and troubleshooting skills. Strong communication skills and the ability to work effectively within a team. Basic computer skills for data entry and equipment control. Adherence to safety protocols and practices. Able to use proper tools such as calipers, gauge, pins and micrometers. Knowledgeable using test indicators. Ability to understand setup sheets. Basic knowledge of programs. Basic knowledge of G&M codes. Basic tooling knowledge. Ability to maintain a safe and clean working environment while adhering to company policies, quality policies, and industry standards. Detail oriented, organized, and able to demonstrate a high sense of urgency. What We Offer: Training and room to grow We pay 100% of our employees' costs toward medical, and dental. Company sponsored life and disability Insurance 401K with up to 4% matching Paid holidays Generous Paid Time Off accrual Pleasant non-corporate environment Fun team bonding events Are You Ready to Join Us? Hyper-growth means hyper opportunities for everyone on our team! At our company, we believe in growing talent from within, providing clear paths for advancement across all roles. Over 90% of our managers and countless others in key positions were promoted internally. If you're ready to grow with us, join our team and discover where your potential can lead! 5th Axis believes that everyone can make an impact, and we are proud to be an equal opportunity employer committed to providing employment opportunity regardless of sex, race, creed, color, gender, religion, marital status, domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition, sexual orientation, pregnancy, military or veteran status, citizenship status, and genetic information. If you require an accommodation to complete the application or the interview process, please contact *******************

Job Description The Quality Engineer Associate supports the Quality team in achieving Summit's goal of Perfect Quality by assisting in the monitoring, documentation, and improvement of quality systems and processes. This role works closely with operations, manufacturing, and engineering teams to ensure products meet internal and customer expectations, as well as IPC standards for printed circuit boards. Ideal for a candidate beginning their career in quality engineering or manufacturing, this position offers the opportunity to develop hands-on skills in quality systems, inspection, data analysis, and continuous improvement within a high-tech manufacturing environment. The goal is to develop into a full Quality Engineer. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: In-Process Quality Support Learn and conduct in-process inspections, quality checks, and test data collection Maintain accurate documentation for quality records, logs, and forms Support the calibration system and assist with calibration tracking Help monitor process performance using basic data collection and analysis tools Participate in internal audits and prepare data or records as needed Documentation and Reporting Assist in maintaining document control procedures Support the generation of quality reports, charts, and metrics Help track nonconforming material and participate in root cause analysis Input and track Corrective Action Requests (CARs) and Supplier CARs (SCARs) Process Improvement Support Quality Engineers in continuous improvement activities Help identify opportunities for reducing defects and improving yields through performing data analysis and area assessments. Assist with implementation and monitoring of statistical process control (SPC) where needed Customer and Supplier Support Support customer quality surveys, tours, or audits as needed Assist with returned material analysis and simple failure analysis tasks Coordinate with outside test or lab services to support inspection processes 2. Goals Continuously provide assessments and work collaboratively to support improved process controls and yields. Develop measurement parameters to track progress. Work both individually and as part of a cross-functional team to support timely customer deliverables and inquiries. Education/Experience: Required: Associate's or Bachelor's degree in Engineering, Industrial Technology, or related field - or equivalent experience in a manufacturing/quality environment Basic understanding of quality principles and manufacturing processes Proficient in Microsoft Excel, Word, and PowerPoint Strong attention to detail and organizational skills Willingness to learn technical standards (e.g., IPC) and quality systems Interest in working in a hands-on capacity with tools in the laboratory and manufacturing areas, as well as, in performing data analysis. Ability to communicate clearly and work collaboratively across departments Preferred: Prior internship or experience in a quality, manufacturing, or engineering role Familiarity with inspection tools (calipers, micrometers, gauges, etc.) Exposure to ISO 9001 or similar quality management systems Understanding of SPC, basic statistics, or root cause analysis tools (5 Whys, Ishikawa) Physical Demands: Employee may lift and/or move up to 25 lbs as required to perform duties. Excellent concentration and must be able to remain focused in a dynamic fast-paced environment. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

Responsible for reviewing digital files, proofs, and overlays to ensure content is built to required specifications and precise to established internal expectations, documented tolerances, print industry standards, procedures and/or published direction. Evaluate and review cards, provide direction for print accuracy or improvement. Quality Control is an extension of Prepress Production and works closely with a variety of internal departments to ensure quality and fiscal responsibility. ESSENTIAL DUTIES AND RESPONSIBILITIES The following statements are intended to describe the general nature of the level of work being performed by an individual assigned to this job. Other duties may be assigned. Review print design engineering, product content, printability and make recommendations to ensure quality standards are attained. Assessed delivered information and implementation of direction received from designated Lead, Project Manager(s), Marketing, Legal, Design, Sports & Entertainment, Operations and written documentation from mechanicals, briefs, and costing documentation. Ensure the highest possible quality of files produced within lithographic pre-production environment. Quality Control Technician(s) will maintain a global view of these production procedures and make on-going recommendations to ensure tolerances are maintained and quality product files produced. Effective communication skills required demonstrate close mindfulness with organized practices. Responsible for interacting daily with Digital Operations Team Lead, Project Manager(s), Prepress Production personnel and Designers.' Support and adhere to internal Creative Departmental procedures and requirements to include but not limited to, assisting Prepress Production during production heavy cycles. Proficiency in the following software or systems: Adobe Creative Suite, MS Office, and Excel. Hands-on, energetic and motivated self-starter with the ability to work additional hours as required. INTERACTION This position will interact closely with the Director of Creative, Digital Operations Production Manager, Project Managers, Prepress Production, Designers, and other internal personnel. EDUCATION/YEARS EXPERIENCE High School Diploma or equivalent. College Degree with an emphasis in Graphic Arts a plus. 1-2 years of experience in Prepress or related area, publishing, or relevant duties. Knowledge of Kodak Prinergy is a plus. REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. KNOWLEDGE, SKILLS AND ABILITIES Present understanding of Prepress and Print Industries' standards, competent knowledge of established production tolerances. Familiarity with the 4/c process, to include, but not limited to: spot colors, varnish, foil, die cuts, deboss and/or embossing. Imposition software skills with a basic understanding of file standards for print production (bleed, trapping, color separation, resolution, etc.). Minimally an intermediate knowledge of Mac and applied software with verified results, fundamental knowledge of ripping and trapping of digital files through a Prinergy Workflow. The qualified applicant must possess acceptable computer skills; a working knowledge of Adobe Creative Suite is a plus. Additionally, basic to intermediate proficiency in the following software: Microsoft Word, Excel, and Outlook. Strong oral and written communication skills demonstrate close mindfulness with organized practices. Ability to articulate clearly with internal partners and not be afraid to ask questions. Effective organizational skills with the ability to manage multiple, high priority projects with dedicated attention to detail. Demonstrated ability to read, comprehend written instructions and follow pre-established guidelines. Utilize technology and maximize efficiency: Maintain education and ability of innovative techniques, technologies, and software capabilities. On an on-going basis, ensure we are maximizing our technology resources and making recommendations for improvements. Excellent interpersonal, problem solving and troubleshooting skills. Professional demeanor; collaborator orientation. Ability to perform duties under minimal supervision while exercising reasonable discretion and independent judgment. Manage time effectively, prioritizing duties and meeting deadlines. Ability to maintain flexible work hours. Work hours are mostly consistent, but production requirements require flexibility. Knowledge of the following areas would be desirable: NHL, Football and Basketball, and/or historical knowledge of pop culture, including comics and films spanning a multitude of trends. Hands-on, energetic and motivated self-starter

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Irvine Scientific (dba FUJIFILM Biosciences), we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Irvine Scientific (dba FUJIFILM Biosciences). Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*******************).

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Summary Description: Reporting to the Quality Supervisor, the Quality Technician is responsible for overseeing day-to-day quality operations for the production lines including the implementation and monitoring of food safety and food quality, sanitation and batching systems to facilitate compliance with company objectives and regulatory requirements. Essential Job Functions: * Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). * Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). * Ensure all products conform to the customer specifications as outlined in SAP system. * Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. * Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. * Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. * Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. * Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. * Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. * Perform analytical tests required to qualify ingredient batches for production. * Perform production line checks at specified intervals. * Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. * Maintain laboratory cleanliness at all times. * Report all out of specification results to designated leadership. * Complete special projects and other reasonable duties as assigned by leadership. Required Skills: * Working knowledge of Excel, Word, and SAP preferred. * Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. * Organized and detail oriented, adaptable to change. * High level of precision and accuracy in inspection and testing processes. * Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations * Understanding of Food Safety Requirements. * Able to read and understand metric system. * Food or beverage laboratory experience preferred. Competencies: * Technical: Skilled in maintaining accurate and detailed records of inspections and tests * Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. * Adaptability: Flexibility to adapt to changing production environments and requirements. * Communication: Clear and concise communication with production staff and management Education and Experience: * Highschool diploma or equivalent. * 1 - 3 years of experience in Quality within a manufacturing environment preferred. * In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: * Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. * Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: * 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X * Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. * Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: Pay Rate: $22.61 an hour Status: Non-Exempt * Medical/Dental/Vision Insurance * Health Savings Accounts and Flexible Spending Accounts * Life and AD&D Insurance, critical illness, hospital indemnity, and accident insurance * Short-term disability and long-term disability * Pet Insurance * Legal Benefits * 401(k) Savings Plan with Company Match * 11 Paid Holidays * 5 Vacation Days and Paid (Sick) Time Off Days in accordance with applicable law * Well-being Benefit * Discount and Total Reward Programs The applicant who is hired will receive wages within the range that will be based on several factors, including, as applicable, criteria such as years and type of experience, relevant education, training, qualifications, certifications/licensing, skills, geographic location, performance, market considerations, seniority system, merit system, type of shift worked, systems that measure earnings by quantity or quality of production, and business or organizational needs (such as whether the position requires regular and necessary travel). How to apply: *********************** Application deadline: October 17, 2025 (the application deadline is a good-faith estimate and may be extended in certain circumstances) Join Refresco TODAY and enjoy a rewarding CAREER! Refresco Beverages US Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law. Criteria Behaviors Team Player: Works well as a member of a group Loyal: Shows firm and constant support to a cause Leader: Inspires teammates to follow them Functional Expert: Considered a thought leader on a subject Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Dedicated: Devoted to a task or purpose with loyalty or integrity Motivations Self-Starter: Inspired to perform without outside help Goal Completion: Inspired to perform well by the completion of tasks Flexibility: Inspired to perform well when granted the ability to set your own schedule and goals Entrepreneurial Spirit: Inspired to perform well by an ability to drive new ventures within the business Ability to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organization

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Summary Description: Reporting to the Quality Supervisor, the Quality Technician is responsible for overseeing day-to-day quality operations for the production lines including the implementation and monitoring of food safety and food quality, sanitation and batching systems to facilitate compliance with company objectives and regulatory requirements. Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ensure all products conform to the customer specifications as outlined in SAP system. Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. Perform analytical tests required to qualify ingredient batches for production. Perform production line checks at specified intervals. Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. Maintain laboratory cleanliness at all times. Report all out of specification results to designated leadership. Complete special projects and other reasonable duties as assigned by leadership. Required Skills: Working knowledge of Excel, Word, and SAP preferred. Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. Organized and detail oriented, adaptable to change. High level of precision and accuracy in inspection and testing processes. Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations Understanding of Food Safety Requirements. Able to read and understand metric system. Food or beverage laboratory experience preferred. Competencies: Technical: Skilled in maintaining accurate and detailed records of inspections and tests Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. Adaptability: Flexibility to adapt to changing production environments and requirements. Communication: Clear and concise communication with production staff and management Education and Experience: Highschool diploma or equivalent. 1 - 3 years of experience in Quality within a manufacturing environment preferred. In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: Pay Rate: $22.61 an hour Status: Non-Exempt •Medical/Dental/Vision Insurance •Health Savings Accounts and Flexible Spending Accounts •Life and AD&D Insurance, critical illness, hospital indemnity, and accident insurance •Short-term disability and long-term disability •Pet Insurance •Legal Benefits •401(k) Savings Plan with Company Match • 11 Paid Holidays • 5 Vacation Days and Paid (Sick) Time Off Days in accordance with applicable law •Well-being Benefit •Discount and Total Reward Programs The applicant who is hired will receive wages within the range that will be based on several factors, including, as applicable, criteria such as years and type of experience, relevant education, training, qualifications, certifications/licensing, skills, geographic location, performance, market considerations, seniority system, merit system, type of shift worked, systems that measure earnings by quantity or quality of production, and business or organizational needs (such as whether the position requires regular and necessary travel). How to apply: www.refrescocareers.com Application deadline: October 17, 2025 (the application deadline is a good-faith estimate and may be extended in certain circumstances) Join Refresco TODAY and enjoy a rewarding CAREER! Refresco Beverages US Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Irvine Scientific (dba FUJIFILM Biosciences), we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Irvine Scientific (dba FUJIFILM Biosciences). Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Responsibilities: Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. Suggest changes in departmental procedures and processes (SOPs) as needed. Performs and documents line clearance at the start of each formulation event. Maintains all required logs and associated documentation. Assures that all chemicals are stored and labeled properly. Performs process scale checks on all required equipment including scales and balances. Keeps work area, utensils, tanks, mills, and equipment clean and organized. Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. Understands and follows procedures to ensure that chemicals are handled properly. Good understanding of metric system and its conversions. Follows and actively participates in sustaining the 6S program in the area. Other duties as requested by Lead or Supervisor. Required Skills/Education: High School Diploma or equivalent. Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. 1-2 years of hands on experience General education about chemicals and proper handling (college level science preferred). Working knowledge of metric system. Good understanding of current Good Manufacturing Practices (cGMPs). Ability to speak, read, and write English. Good oral and written communication skills. Salary and Benefits: For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). Medical, Dental, Vision Life Insurance 401k Paid Time Off *#LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*******************).

RxSight is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world's first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company's mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: Performs quality functions to support IS013485, FDA, CGMP, Quality System Regulations, management reporting, LAL production/QA/QC, chemistry QA/QC, product release, in-process inspection, incoming inspection, quality process improvements for LDD, manufacturing transfer, and facility support. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Read, comprehend, and follow documents related to manufacturing, inspection and quality systems for audits, compliance, and implementation. * Audit and approve production records. * Verify production process via auditing/observation and testing. * Inspect process output and product parameters against specifications. * Ensure routine compliance with process steps and proper documentation of records. * Maintain raw material lot information, monitor expiration date, and quarantine inventory when materials are expired. * Performs incoming inspection on raw materials and incoming sub-assemblies/finished goods. * Collect data for process, quality system, manufacturing quality and performance metrics and generate reports for management review. * Identify non-conformances, deviations, non-compliance, lack of calibration etc. and propose corrective actions to management. * Facilitate Manufacturing Review Board and supports non-conformance decision process. * Govern and transact materials physically and through electronic system. * Monitors laboratory and engineering equipment to ensure compliance with preventive maintenance and calibration programs. * Performs laboratory notebook audits, inventory audits, and maintains QA retains. * Take initiatives for the process improvements changes as related to manufactured components and finished products for LAL. * Responsible for assisting the Quality Assurance team with any ad hoc reports and assignments as required. * Perform incoming inspection and lot control activities of materials and parts. * Assist Quality, Manufacturing and R&D groups in running validation, verification, and developmental studies, and defining processes. * Development of inspection techniques and transfer to production and everyday use. * Monitor gowning and cleanroom logbook check per SOP to ensure all section of the cleaning log has been filled accurately and completely. * Provide Good Manufacturing Practices (GMP) and Quality Standard Operating Procedures (SOP) training to relevant department. * Create and review First Article Inspection Reports when necessary. Requirements REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. * Prior experience of working in cleanroom environment and/ or medical device manufacturing is highly preferred. * Professional, responsible, energetic, and accountable. * Excellent communication skills. * Intellectually curious and eager to learn. * Individual must be Quality oriented and possess a natural ability to pay attention to details. EDUCATION, EXPERIENCE, and TRAINING: * Associate degree (A.A.) or equivalent from a two-year college or technical school; six months to one-year related experience and/or training; or equivalent combination of education and experience. * Experience within a medical device company or regulated industry preferred. * Microsoft Word; Microsoft Excel * Training to be completed per the training plan for this position as maintained in the document control system. * The training requirements on TRN-10007 Insider Trading Policy, TRN-10008 Global Anti-Bribery and Anti-Corruption Policy and TRN-10009 Code of Business Conducts and Ethics must be diligently completed within 30 days from the hiring date and on an annual basis COMPUTER SKILLS: * Microsoft Word; Microsoft Excel; Microsoft Access; QuickBooks. Notice to Staffing Agencies and Search Firms: RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight's Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances. Salary Description $25.00 to $27.00 per hour

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview: As a Metrology Quality Technician, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: Develop and implement new programs on PC-DMIS or Polyworks, and Romer Arm to accurately measure parts in accordance with drawing specifications. Collaborate closely with Quality Engineers to strategize and design programs to meet our production requirements. Conduct dimensional inspections on parts and assemblies using portable CMM and precision gauges such as micrometers, calipers, and height gauges. Perform visual inspections of products in line with established procedures. Execute first piece inspections and monitor quality throughout the production process. Support the production and supplier quality teams with PPAP projects to ensure compliance and quality standards. Advocate for safety in all aspects of your work. Who You Are: Have a strong background in using precision measuring tools and equipment. Skilled at reading and understanding engineering drawings, standards, and procedures. Experienced in programming and operating Portable CMMs. Able to read and interpret drawings and specifications according to ASME Y 14.5 standards. Practical experience in conducting both in-process and final inspections. Familiar with a variety of mechanical inspection tools like micrometers and calipers. Committed to maintaining accuracy and attention to detail while completing tasks efficiently. Knowledgeable about dimensional, visual, and mechanical inspection processes. Comfortable using Google Sheets and Docs for reporting. Capable of working independently and making smart decisions based on general guidance. Enjoy collaborating with team members to achieve common goals. Minimum Qualifications: High school diploma or GED. Minimum 3 years of experience programming/operating CMMs and performing inspections using hand gauges. PC-DMIS/Polyworks training certificate is a plus. California Pay Range $30 - $40 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

The Quality Engineer Associate supports the Quality team in achieving Summit's goal of Perfect Quality by assisting in the monitoring, documentation, and improvement of quality systems and processes. This role works closely with operations, manufacturing, and engineering teams to ensure products meet internal and customer expectations, as well as IPC standards for printed circuit boards. Ideal for a candidate beginning their career in quality engineering or manufacturing, this position offers the opportunity to develop hands-on skills in quality systems, inspection, data analysis, and continuous improvement within a high-tech manufacturing environment. The goal is to develop into a full Quality Engineer. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: In-Process Quality Support Learn and conduct in-process inspections, quality checks, and test data collection Maintain accurate documentation for quality records, logs, and forms Support the calibration system and assist with calibration tracking Help monitor process performance using basic data collection and analysis tools Participate in internal audits and prepare data or records as needed Documentation and Reporting Assist in maintaining document control procedures Support the generation of quality reports, charts, and metrics Help track nonconforming material and participate in root cause analysis Input and track Corrective Action Requests (CARs) and Supplier CARs (SCARs) Process Improvement Support Quality Engineers in continuous improvement activities Help identify opportunities for reducing defects and improving yields through performing data analysis and area assessments. Assist with implementation and monitoring of statistical process control (SPC) where needed Customer and Supplier Support Support customer quality surveys, tours, or audits as needed Assist with returned material analysis and simple failure analysis tasks Coordinate with outside test or lab services to support inspection processes 2. Goals Continuously provide assessments and work collaboratively to support improved process controls and yields. Develop measurement parameters to track progress. Work both individually and as part of a cross-functional team to support timely customer deliverables and inquiries. Education/Experience: Required: Associate's or Bachelor's degree in Engineering, Industrial Technology, or related field - or equivalent experience in a manufacturing/quality environment Basic understanding of quality principles and manufacturing processes Proficient in Microsoft Excel, Word, and PowerPoint Strong attention to detail and organizational skills Willingness to learn technical standards (e.g., IPC) and quality systems Interest in working in a hands-on capacity with tools in the laboratory and manufacturing areas, as well as, in performing data analysis. Ability to communicate clearly and work collaboratively across departments Preferred: Prior internship or experience in a quality, manufacturing, or engineering role Familiarity with inspection tools (calipers, micrometers, gauges, etc.) Exposure to ISO 9001 or similar quality management systems Understanding of SPC, basic statistics, or root cause analysis tools (5 Whys, Ishikawa) Physical Demands: Employee may lift and/or move up to 25 lbs as required to perform duties. Excellent concentration and must be able to remain focused in a dynamic fast-paced environment. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

Job DescriptionDescription: RxSight is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world's first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company's mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: Performs quality functions to support IS013485, FDA, CGMP, Quality System Regulations, management reporting, LAL production/QA/QC, chemistry QA/QC, product release, in-process inspection, incoming inspection, quality process improvements for LDD, manufacturing transfer, and facility support. ESSENTIAL DUTIES AND RESPONSIBILITIES: Read, comprehend, and follow documents related to manufacturing, inspection and quality systems for audits, compliance, and implementation. Audit and approve production records. Verify production process via auditing/observation and testing. Inspect process output and product parameters against specifications. Ensure routine compliance with process steps and proper documentation of records. Maintain raw material lot information, monitor expiration date, and quarantine inventory when materials are expired. Performs incoming inspection on raw materials and incoming sub-assemblies/finished goods. Collect data for process, quality system, manufacturing quality and performance metrics and generate reports for management review. Identify non-conformances, deviations, non-compliance, lack of calibration etc. and propose corrective actions to management. Facilitate Manufacturing Review Board and supports non-conformance decision process. Govern and transact materials physically and through electronic system. Monitors laboratory and engineering equipment to ensure compliance with preventive maintenance and calibration programs. Performs laboratory notebook audits, inventory audits, and maintains QA retains. Take initiatives for the process improvements changes as related to manufactured components and finished products for LAL. Responsible for assisting the Quality Assurance team with any ad hoc reports and assignments as required. Perform incoming inspection and lot control activities of materials and parts. Assist Quality, Manufacturing and R&D groups in running validation, verification, and developmental studies, and defining processes. Development of inspection techniques and transfer to production and everyday use. Monitor gowning and cleanroom logbook check per SOP to ensure all section of the cleaning log has been filled accurately and completely. Provide Good Manufacturing Practices (GMP) and Quality Standard Operating Procedures (SOP) training to relevant department. Create and review First Article Inspection Reports when necessary. Requirements: REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Prior experience of working in cleanroom environment and/ or medical device manufacturing is highly preferred. Professional, responsible, energetic, and accountable. Excellent communication skills. Intellectually curious and eager to learn. Individual must be Quality oriented and possess a natural ability to pay attention to details. EDUCATION, EXPERIENCE, and TRAINING: Associate degree (A.A.) or equivalent from a two-year college or technical school; six months to one-year related experience and/or training; or equivalent combination of education and experience. Experience within a medical device company or regulated industry preferred. Microsoft Word; Microsoft Excel Training to be completed per the training plan for this position as maintained in the document control system. The training requirements on TRN-10007 Insider Trading Policy, TRN-10008 Global Anti-Bribery and Anti-Corruption Policy and TRN-10009 Code of Business Conducts and Ethics must be diligently completed within 30 days from the hiring date and on an annual basis COMPUTER SKILLS: Microsoft Word; Microsoft Excel; Microsoft Access; QuickBooks. Notice to Staffing Agencies and Search Firms: RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight's Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances.

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview As a Quality Technician, GA/Chassis, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: Inspection and Testing: Conduct detailed inspections of automotive components and finished products to ensure compliance with quality standards and specifications Quality Control: Implement and maintain quality control processes throughout the production cycle Continuous Improvement: Actively participate in root cause analysis and corrective action initiatives to address quality issues and prevent recurrence Collaboration: Work closely with production teams, engineers, and other stakeholders to communicate quality standards and expectations Training and Development: Provide training to production staff on quality control procedures and best practices Who You Are: High school diploma required (College degree or equivalent preferred but not required) 2 or more years of experience in a Manufacturing, Quality, or Process focused role Strong mechanical aptitude and trouble-shooting skills Excellent attention to detail and analytical skills Effective communication and collaboration skills Strong understanding of chassis or automotive assembly is preferred California Pay Range $25-$32 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

The Quality Engineer Associate supports the Quality team in achieving Summit's goal of Perfect Quality by assisting in the monitoring, documentation, and improvement of quality systems and processes. This role works closely with operations, manufacturing, and engineering teams to ensure products meet internal and customer expectations, as well as IPC standards for printed circuit boards. Ideal for a candidate beginning their career in quality engineering or manufacturing, this position offers the opportunity to develop hands-on skills in quality systems, inspection, data analysis, and continuous improvement within a high-tech manufacturing environment. The goal is to develop into a full Quality Engineer. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: In-Process Quality Support Learn and conduct in-process inspections, quality checks, and test data collection Maintain accurate documentation for quality records, logs, and forms Support the calibration system and assist with calibration tracking Help monitor process performance using basic data collection and analysis tools Participate in internal audits and prepare data or records as needed Documentation and Reporting Assist in maintaining document control procedures Support the generation of quality reports, charts, and metrics Help track nonconforming material and participate in root cause analysis Input and track Corrective Action Requests (CARs) and Supplier CARs (SCARs) Process Improvement Support Quality Engineers in continuous improvement activities Help identify opportunities for reducing defects and improving yields through performing data analysis and area assessments. Assist with implementation and monitoring of statistical process control (SPC) where needed Customer and Supplier Support Support customer quality surveys, tours, or audits as needed Assist with returned material analysis and simple failure analysis tasks Coordinate with outside test or lab services to support inspection processes 2. Goals Continuously provide assessments and work collaboratively to support improved process controls and yields. Develop measurement parameters to track progress. Work both individually and as part of a cross-functional team to support timely customer deliverables and inquiries. Education/Experience: Required: Associate's or Bachelor's degree in Engineering, Industrial Technology, or related field - or equivalent experience in a manufacturing/quality environment Basic understanding of quality principles and manufacturing processes Proficient in Microsoft Excel, Word, and PowerPoint Strong attention to detail and organizational skills Willingness to learn technical standards (e.g., IPC) and quality systems Interest in working in a hands-on capacity with tools in the laboratory and manufacturing areas, as well as, in performing data analysis. Ability to communicate clearly and work collaboratively across departments Preferred: Prior internship or experience in a quality, manufacturing, or engineering role Familiarity with inspection tools (calipers, micrometers, gauges, etc.) Exposure to ISO 9001 or similar quality management systems Understanding of SPC, basic statistics, or root cause analysis tools (5 Whys, Ishikawa) Physical Demands: Employee may lift and/or move up to 25 lbs as required to perform duties. Excellent concentration and must be able to remain focused in a dynamic fast-paced environment. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic