Quality control technician jobs in Manchester, NH

The Alexander Technology Group is looking for a Quality Technician for a client in the Portsmouth, NH area. This is a full-time role No 3rd party applicants/agencies will be considered, do not reach out. Salary: 60-75k Must be on-site Requirements: Quality Technician Perform in-process and final product inspections/testing for device products: Conduct visual/functional checks on assembled devices Support environmental monitoring and cleanliness in manufacturing/assembly areas: Execute routine sampling and testing (e.g., viable/non-viable particulates, settle plates) in ISO-classified cleanrooms used for assembly, escalate excursions, and assist in gowning qualification and line clearance activities. Execute sampling and basic analytical testing of incoming materials and in-process samples: Test device components Document deviations, non-conformances, and support CAPA investigations Assist in equipment qualification, process validation, and cleaning validation activities If interested, please send resume to ************************

Job Title: Cleanroom Specialist The Precision Parts Cleaner is responsible for cleaning and inspecting optical components prior to thin-film coating. Work involves manual and automated cleaning, documentation in Epicor Shop Floor Management, and handling precision parts in a clean-controlled environment within the Coating Department. Key Responsibilities Verify serial numbers, quantities, and condition of materials received for coating. Clean optical parts daily following standard operating procedures and load specifications. Complete all required paperwork and electronic records; generate Acceptance Test Plans for each cleaned and kitted lot. Collaborate with technicians and supervisors on rejections and workflow status. Conduct monthly inventory checks and report discrepancies. Operate and maintain ultrasonic cleaning equipment according to SOPs. Top Skills / Requirements High School Diploma or GED Excellent vision for close-range inspection Ability to perform repetitive, detail-oriented tasks Basic computer skills (Epicor experience a plus) Preferred Experience (0-3 years) Cleanroom, assembly, or inspection background Handling precision components Cleaning critical surfaces Familiarity with MIL specifications

Job Title: Manufacturing Associate I - Cell Therapy Job Duration: 6 Months with potential to extend Shift Schedule: (There will be 6-8 weeks of training 7 AM - 4 PM, Monday to Friday) Rotational shift schedule PURPOSE AND SCOPE OF POSITION The client seeks Associates within manufacturing who bring enthusiasm, intellectual curiosity, scientific rigor, and a desire to help drive novel programs. The candidate must be goal-oriented, flexible, and able to work efficiently with safety and quality in mind. We are searching for enthusiastic and innovative individuals with a good understanding of good manufacturing practices to support routine manufacturing operations for Cell Therapy. DUTIES AND RESPONSIBILITIES Performing patient process unit operations and support operations described in standard operating procedures and batch records. Work in a cleanroom environment and perform aseptic processing; maintain manufacturing environmental conditions (Non-Viable Particulate(s) and Viable microbial levels per controlled area classification specifications) by performing area disinfection regimen as required to meet global Health Authority requirements. Completing documentation required by process transfer protocols, validation protocols, standard operating procedures, and batch records. Performing tasks in a manner consistent with the safety policies, quality systems, and GMP requirements. Completing training assignments to ensure the necessary technical skills and knowledge. Assisting in setting up manufacturing areas and equipment/fixtures. Perform facility and equipment commissioning activities. Training others on SOPs, Work Instructions to successfully complete manufacturing operations. Executing daily unit operations schedule that includes people, product, and material flow across multiple shifts. REQUIRED COMPETENCIES Education: Bachelor's in a relevant science or engineering discipline is preferred. High school diploma and 2 years of experience in cGMP bioprocessing manufacturing, cell therapy manufacturing, or relevant experience. Preferred Qualifications: Knowledge of cGMP regulations and FDA guidance applicable to biologics and cell therapy manufacturing is preferred.

Setting: Hospital? Are you ready to take your expertise as a cardiovascular technologist to new heights? Join Jackson HealthPros as a cath lab tech (Cardiovascular Invasive Specialist) and play a vital role on a team that values your expertise-while enjoying the excitement of a new location. Earn full time pay and benefits while you assist physicians and other Cath lab personnel in conducting vital diagnostic tests and procedures; and operate advanced medical equipment to capture crucial images and data of the heart and blood vessels. What You'll Need: ARRT certified Radiologic Technologist Registered Cardiovascular Invasive Specialist (RCIS) certification from Cardiovascular Credentialing International (CCI) preferred. Must have 2 years' experience in a Cath Lab hospital setting BLS & ACLS Certification (American Heart Association preferred) State specific licensing when required Apply now and you'll be contacted by a recruiter who'll fill you in with the details. Benefits Designed for Travelers We deeply value your commitment to impacting others, that's why we offer a comprehensive and competitive benefits package starting your first day. Weekly, On-Time Pay because that's how it should be Full Medical Benefits & 401k Matching Plan 24/7 Recruiter: Your main point of contact available by text, phone or email Competitive Referral Bonuses 100% Paid Housing Available Travel & License Reimbursement Impacting the Quality of Care for Patients Nationwide As a healthcare professional with Jackson HealthPros, you get the flexibility, stability and growth you need with the satisfaction of impacting communities nationwide. Choose from a variety of career options including direct hire, temp-to-hire, and travel contracts in cities coast to coast. Get full-time pay, benefits, and relocation assistance (at no cost to you) in travel contracts that give you the freedom to explore, with the stability of a full-time job. Find your perfect match with ProVenture, our AI enhanced career app designed just for you. EEO Statement Jackson Healthcare and its family of companies are an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender, gender identity and expression, national origin, age, disability or protected veteran status. We celebrate diversity and are committed to creating an inclusive environment for all of our associates. Join our team as a traveling Physical Therapist where you'll help patients recover from injuries and manage chronic conditions while experiencing life in a new location. Apply now and we'll connect you with a recruiter who'll reach out with more details.

The Quality Technician - FAI Specialist is responsible for coordinating and supporting the creation of AS9102 First Article Inspection Reports (FAIR) in alignment with industry and customer specific requirements. This position works alongside various other departments and is vital to ensuring success of the AS9102 program. Duties/Responsibilities: Navigates internal company software and database systems to gather information. Accurately completes AS9102 Reports (FAIR) and other dimensional inspection reports as required. Interpret drawings, specifications and customer requirements. Works effectively and communicates with various departments, including: Planning, Marketing, Quality, QC Inspection and Source Inspection. Assures accuracy of FAI programs and records. Assists with identifying opportunities for improvement within the FAIR process to aid in the success of the Quality Department. Maintain a positive work environment by acting and communicating in a manner so that you get along with customers, clients, vendors, co-workers and management. This position may require overtime for coverage on alternate shifts and weekends. Will be required to perform other duties as requested, directed or assigned. Requirements: High School diploma or General Education Degree (GED). Previous experience as a First Article Inspection Specialist is preferred but not required. Must be able to use a computer to maintain records, develop reports, and analyze data and document discrepancies as well as using a computer to perform all other related aspects of the position. Must have excellent communication skills and ability/flexibility to work in a fast-paced environment. Must be able to read and interpret technical drawings, prints and industry/customer specifications. Must be able to read and interpret GD&T requirements. Must be able to display a thorough attention to detail and organization. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U. S. person as defined in ITAR, 22 CFR 120. 15 (U. S. Citizenship or Resident Alien Status) and defined by 8 U. S. C. 1101(a) (20). Amphenol is a proud Equal Opportunity Employer as to all protected groups, including Individuals with Disabilities and Protected Veterans. For consideration for this position, please apply online to: ********************* acquiretm. com APC878

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman's Space Sector is seeking a Quality Control Technician - Level 2 to join our team in Devens, MA. This position is 100% onsite and cannot accommodate telecommute work. AOA Xinetics (AOX), a wholly-owned Northrop Grumman Space Systems Business Unit, is a leading supplier of complex electro-optic and photonic systems and subsystems that control and manipulate light waves for a variety of applications. Reporting to the Quality Manager, the Quality Control Technician - Level 2 should have technical strengths in verification of requirements specified for operations, products, processes, and documents. Must possess the ability to plan and organize work in order to effectively and successfully accomplish assigned tasks. Have the ability to work multiple programs while maintaining attention to detail. Accurately interpret drawings and specifications. Working knowledge and understanding of GD&T is essential for this role. Be strategic in the identification of technical needs and solutions coupled with a strong program execution focus. Possess excellent communication skills and effectively interface with AOX technical and non-technical department members, suppliers, and customers. **This position will work a 9/80 schedule, with every other Friday off.** **In this job, you wil** l: + Verify optical, ceramic, and mechanical components and sub-systems. Verify electrical assemblies and wiring harnesses. Recommend verification or test methods and statistical process control procedures for achieving required levels of product compliance and reliability. Propose changes in design to improve measurement assessments, systems and/or process reliability. + Review and verify optical and electrical testing methods and results. Witness and verify product performance testing. Compile data and define changes required in product design, test equipment, test procedures, manufacturing processes, or new testing requirements. Evaluate product compliance to specified requirements and readiness to release. Other assignments presented by the Quality Manager. + Compile data and evaluate safety critical components and constructions in system design, equipment and procedures to mitigate risks. Develop safety documents as required to support customer and test/certification requirements. + Design and implement Quality plans for use in verifying in-coming product Quality. + Perform product safety and EMI testing on systems and sub-assemblies as required. + Research, evaluate and qualify supplier approval requirements, perform first article qualifications, perform internal audits, monitor and manage internal and supplier corrective actions + Participate in MRB as needed. **Basic Qualifications:** + High School diploma or equivalent and 2 years additional education and/or related experience. or an Associate Degree in Quality, Manufacturing or Technology and Quality Assurance Verification + No clearance required to start + Operating Coordinate Measuring Machinery (CMM) + Strong problem solving and collaboration skills and verbal/written communication skills + Intermediate Microsoft Office skills + US Citizenship is a requirement for employment **Preferred** **Qualifications:** + Experience in DoD, Aerospace and/or Semiconductor Fabrication Manufacturing + QC/Verification experience with optical, ceramic, and/or electro-optical sensors and systems verification, precision optics, opto-mechanical and electrical products + COTs product development + Experience working in or implementing Copy Exact control systems + Experience in reliability prediction and in-use reliability measurements + FMEA, RCCA, Risk management, or Quality auditing experience + Experience implementing ISO 9000, AS9100, TL9000, TS16949, ISO 13485, and/or CMMI for Development **Physical Requirements:** + Occasional travel to our East Harford facility and/or supplier sites for source verification or supplier evaluation + Excellent hand/eye coordination and manual dexterity + Ability to sit or stand for extended periods of time and light physical effort required **Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below:** ************************************* Working at Northrop Grumman is more than just a paycheck. We offer a comprehensive Total Rewards and benefits package designed to help you thrive at work and in life. For more information on our Total Rewards package, please visit our Total Rewards site. Northrop Grumman Total Rewards (***************************************************************************************************************************************************** E3NTMyNzU3NDgkbzEyMzckZzEkdDE3NTMyNzY2ODQkajU5JGwwJGgw) Primary Level Salary Range: $51,400.00 - $85,600.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. Reads and interprets work instructions and to determine dimensions and tolerances. Reads blueprints or specifications to determine dimensions and tolerances. Collates test data and drafts quality reports. May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. May interpret Geometric Dimensioning & Tolerance Strong attention to detail, organization, and documentation skills. May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. Assists in other areas in support of product conformity. Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. Complies with federal and state laws, regulations, specifications and company standards. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements QUALIFICATIONS, SKILLS, AND ABILITIES Two-year certification from college or technical school; or ASQ Certified Quality Technician; or 4 years related experience and/or training; or equivalent combination of education and experience. Experience as an inspector or quality technician. Experience working with quality management systems, should know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Comfortable using Microsoft Office (Excel, Word, Outlook, PowerPoint) or similar software. Preference for experience in aerospace, defense, other regulated manufacturing environments; experience working with NAVSEA is highly desirable. BENEFICIAL SKILL OR EXPERIENCE Advanced skills in Word and Excel. Strong technical writing skills: ability to create or update procedures and work instructions. Experience operating and setting up CMM's and Faro arms beneficial but not required. Advanced knowledge of inspection, plating and coating processes, and raw materials a plus. A personal and professional background sufficient to secure Government Security Clearance. AAP/EEO STATEMENT Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits Paid time off Floating holidays Paid holidays 401(k) 401(k) company matching Dental & Vision insurance (Company paid) Employee assistance program Flexible spending account Competitive health insurance Health savings account Life insurance Referral program

At Spindrift, we're making every beverage a positive force of nature. Founded in 2010, we believe the best flavors come directly from nature. That's why every Spindrift beverage is made the hard way-with real squeezed fruit, never from concentrate. From sourcing the best-tasting fruit globally to maintaining a carefully honed manufacturing process, we believe in doing things the hard way, the intentional way, the better albeit more challenging way, the right way - because, in the end, it's worth it. Spindrift sparkling water is available nationwide, and Spindrift Spiked and Spindrift SODA is available in select markets. We are also a proud member of 1% for the planet, donating to environmental causes. Spindrift is headquartered in Newton, MA. The Quality Technician Role The Quality Technician will be responsible for supporting the Spindrift quality program across Spindrift's beverage portfolio, assist with maintenance of the retain library, assistance with recruiting and training internal sensory panelists, assist with collecting, synthesizing and archiving data as it relates to quality initiatives. Responsibilities include: Assisting the Sensory Analyst with managing the Spindrift sensory program by supporting new panelist onboarding and training, product retain tastings onsite, raw material evaluations, and standard production retains Assisting with managing the Product Retain Library to ensure it is neatly organized at all times, including maintaining an orderly process of receiving/processing product retains into the library upon arrival and the disposal/removal of out-of-date code samples Supporting the creation and organization of quality documentation (i.e. SOPs, protocols, training documents and more as needed) Collaborating with various teams within operations on the following activities: Finished product releases as needed, including review of finished micro reports and sensory evaluations Production holds as needed, including performing sensory evaluations on finished product and communicating results to relevant parties Assist with qualification of new suppliers, including performing required sensory evaluation of raw materials to determine acceptability for use Data entry and approval for specified raw materials into quality management system Assist with consumer complaint process, to include but not limited to: data entry, sample collection, investigation support Requirements Previous food safety experience, with experience in HACCP, GMP, USDA, or FDA preferred. Previous experience with SQF, ISO, GFCO, and/or FDA audits desirable Excellent verbal and written communication skills Thrives in an entrepreneurial environment and considers no task too small nor too large Consistently demonstrates accuracy, thoroughness and dependability Establishes and maintains effective channels of communications with internal and external contacts Adjusts tasks and focus in accordance with changing deadlines and priorities Available to travel up to 10% Able to work in the Newton, MA office Benefits Hourly rate for this part-time position is $22 - $25 / hour, 24-32 hours per week.

We're hiring a Metrology Quality Technician to join our quality team. This role is hands-on with CMM programming, precision inspections, and GD&T, ensuring our products meet the highest standards. You'll support engineering, new product development, and quality investigations while working with cutting-edge inspection tools. Key Responsibilities Program and troubleshoot CMMs;perform precision inspections including FAIs. Apply GD&T and ASME standards to ensure product compliance. Use a variety of inspection tools (calipers, micrometers, vision systems, 3D scanning, etc.). Partner with engineers and quality teams to improve inspection methods and support new product development. Document inspection results and contribute to quality investigations. Qualifications Associate degree or higher in engineering, design, or manufacturing. 3+ years of experience in measurement, CMM programming, and GD&T. 6+ years in a manufacturing environment. Strong knowledge of inspection tools and ASME Y14.5 (certification preferred). Proficiency with Microsoft Office;strong communication and teamwork skills. Why Join Us Work with advanced inspection technology in a clean, collaborative environment. Be part of a team dedicated to precision, quality, and continuous improvement. Opportunities to grow your skills and contribute to impactful projects.

Job Title: Quality Technician Pay: $22-$25 per hour, depending on experience Hours: Monday - Thursday, 6:00 AM - 2:30 PM, and a half day on Friday! 36 hours a week! As a Quality Technician, you'll help ensure that all customer and company quality standards are met-from raw materials to finished goods. You'll work closely with the Quality Manager and other team members to support inspections, documentation, and compliance activities that keep operations running smoothly. What You'll Do As a Quality Technician, you will be responsible for: Reviewing and approving testing reports from third-party laboratories Maintaining up-to-date knowledge of ASME regulations and applicable industry codes Receiving and inspecting returned products to determine quality and return category Evaluating inbound goods, preparing documentation, and managing return transactions Using metrology hand tools and small test fixtures to perform mechanical inspections Collaborating with the MRB team to determine the disposition of nonconforming materials Supporting company quality standards and 6S organization practices Working independently with minimal supervision Performing additional duties as assigned by the Quality Manager What You'll Bring The ideal candidate for this role will have: High school diploma or equivalent (technical education preferred) At least 5 years of experience in a similar quality technician or inspection role Strong math and mechanical aptitude Ability to read and interpret blueprints Familiarity with ASME Section II and IV (preferred) Proficiency with Microsoft Office and general computer use Experience with ERP systems such as M2K (inventory moves, RGA processing, etc.) Excellent communication, organization, and time management skills Ability to lift up to 35 pounds and work in a fast-paced environment Why Join Us in Rochester, NH? Stable schedule: Enjoy a four-and-a-half-day workweek with Fridays ending early Great pay: Competitive hourly rate based on experience Career opportunity: Temp-to-hire position with long-term potential Affordable health and prescription coverage with no waiting period Employer benefits available upon permanent hire Ask about our Referral Bonus Program to earn extra cash! Location & Schedule This position is on-site in Rochester, NH and follows a Monday-Thursday 6:00 AM-2:30 PM, Friday half-day schedule. 36/HRS a week! Ready to Take the Next Step? If you're ready to start a rewarding career as a Quality Technician in Rochester, NH, apply today or contact our recruiting team to learn more. Don't wait - we're hiring now! #BSCD

**Collaborate with Innovative 3Mers Around the World** Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a diversity of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. **This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.** **The Impact You'll Make in this Role** As a Quality Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Support product quality, product development, process scale-ups, and production processes by performing standardized, specialized, or complex tests, measurements, and tasks on experimental or standard production. + Activities will focus on the appraisal of raw materials, semi-finished, and finished goods. + Ensures that 3M quality standards and procedures are met and maintained. + Teach plant personnel quality methods and measurement techniques. + Complete daily audits of the manufacturing floor, quantify and report the results. Run precision test equipment and report results. + Other quality related tasks as required. **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + High school diploma/GED or higher (completed and verified prior to start) from an accredited institution + One (1) year combined quality and/or laboratory experience in a private, public, government or military environment + One (1) year experience utilizing Microsoft Office (including Excel) Additional qualifications that could help you succeed even further in this role include: + Associates/Two Year Technical degree or higher from an accredited institution in a private, public, government or military environment + Three (3) years combined quality and/or laboratory experience + Equipment validation experience + Good written and verbal communication skills that include excellent data collection and management + Flexible and responsive to changing priorities; able to multi-task; good organizational skills; attention to detail and compliant behaviors **Work location:** + **On-site Tilton, NH 3rd Shift schedule** **Travel: May include up to 5% domestic/international** **Relocation Assistance: Is not authorized** **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $59,409 - $72,611, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: **************************************************************** Good Faith Posting Date Range 11/25/2025 To 12/25/2025 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en\_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Job Title: Intermediate Quality Technician Company: Munters Salary: $26.17/hr. - $33.10/hr. About Us: Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission-critical. Climate control systems often account for a large percentage of the energy consumption in many of our customers' operations. With an optimal climate system, we can help them to more efficiently use energy or water resources, and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation. We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on. Job Description: Work as part of final test team, analyzing and correcting electrical problems. Keeps the Team Leader and Quality Manager informed of all issues affecting the performance of the department or product quality or delivery. Responsibilities: · Assumes delegated responsibilities from the Team Leader of the Quality department. When working with lower graded electrical personnel, assumes some responsibility to coordinate the mutual effort and provide guidance and direction to perform the work in a safe and workmanlike manner and the installation be in compliance with specifications, established standards and the National Electric Code · Understands electrical theory and practice as applied to the operation of such components as electric motors, motor starters, contractors, control relays, time delay relays, circuit breakers, and other related electrical, pneumatic and mechanical components · Applies trade knowledge and experience to recognize errors or potential problems with schematics, assembly drawings, parts lists or instructions. Advise supervisor of problems or questions and, if possible, recommends solutions · Prepares, without supervision, electrical components and subassemblies at the bench or on the product following specified methods and techniques. Cuts or extends lead wires, attaches terminals or connections. Interconnects wires according to diagrams or schematics · Inspects repair jobs, prepare list of parts to be replaced or repaired. Tests repaired or reconditioned unit for compliance with specifications or established standards · Installs, without supervision, a complete electrical and/or pneumatic system utilizing electrical conduits, fittings, boxes and wire, following electrical diagrams and schematics. Insures that the components are secure and free from any interference and functioning properly · Performs trouble-shooting as necessary on parts or subassemblies to identify and resolve the problem · Tests unit using required test equipment and complete test reports · Performs work and/or delegated responsibilities without supervision and with either verbal or written instructions. Ensures work area is clean and orderly · Work in other areas when needed. · Maintain ISO standards · Observe all safety rules Requirements: · Understands electrical theory and practice · Capability of reading electrical diagrams and schematics · Requires at least 1 year of experience in manufacturing or relevant experience · High school diploma or equivalent · Medium Work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects · Climbing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting · The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data, viewing computer terminal, expansive reading, etc. · The worker is not substantially exposed to adverse environmental conditions Benefits: · Competitive salary · Comprehensive health, dental, and vision insurance plans. · Generous vacation and paid time off. · 401(k) retirement savings plan with employer matching. · Professional development opportunities, including tuition reimbursement and conference attendance. · Company-sponsored social events and team-building activities. · State-of-the-art equipment and tools to support your work. Equal Opportunity Employer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test, background check, and physical as applicable for the position. Benefits: Competitive salary Comprehensive health, dental, and vision insurance plans. Flexible work schedule Generous vacation and paid time off. 401(k) retirement savings plan with employer matching. Professional development opportunities, including tuition reimbursement and conference attendance. Company-sponsored social events and team-building activities. State-of-the-art equipment and tools to support your work. Equal Opportunity Employer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test and background check, as applicable for the position.

Title: Operations Quality Technician Shift: Friday - Sunday 6am - 6: 30pm Duration: 6 months with possible extension As long as they work out, they should be converted to FTE after 90 days. The Operations Quality Technician will be a critical contributor in a mission that truly represents a once-in-a-lifetime opportunity to join a company that is making significant investments in establishing US manufacturing, expanding internationally, and delivering a consistent cadence of product innovations to the market and investing in its people. The successful candidate will be responsible for ensuring our manufacturing site produces and distributes products which meet or exceed all established quality standards and will be responsible for ensuring our processes and procedures are compliant with corporate policies and federal law. The individual will be trained in performing Incoming, In-process inspections in the cleanroom, or assessing the final product's efficacy prior to market release. In addition to those activities, this position may also be required to support production operations, metrology, microbiology, or other manufacturing functions as business needs arise. This position requires a strong attention to detail, problem solving skills, and willingness to work in a fast-paced manufacturing environment. Responsibilities Inspect and record results of work on Incoming raw material, In-process, or Lot Qualification at various stages of the production process, distribution process to determine and maintain the quality and reliability of our product. Assess and complete inspection reports and records including the entry of data into various electronic systems. (For example -Word, Excel, SAP, Electronic DHR systems, Oracle Agile, and others). Generate, review, and maintain quality records in support of the Quality System. (For example -device history records and training records) Ensure the equipment calibration status is within the timeframe of use. Assist the Quality Manager in notified body and regulatory authority audits and inspections. Works from specifications, work plans, procedures, and general instructions from either Quality Engineers, Quality Supervisor, or the Quality Manager. Required to maintain and enforce cGMPs. Safely follow standard operating procedures including but not limited to quality standards, material handling, and record keeping. Must follow all Good Manufacturing Practices (GMPs), Good Documentation Practices (GDPs), and Good Laboratory Practices (GLPs). Notifies Quality or Operations Leadership of any discrepancies to ensure quality standards and safety of operations are maintained at all times. Maintain a clean work environment suitable for medical device manufacturing and cleanroom production. Performs other duties as required Required Skills and Competencies: Excels at the organization and maintenance records accurately. Self-starter capable of dealing with a variety of tasks in a fast paced, multi-tasking environment. Must be proficient in English language to be able to read documentation, communicate, and write. Mathematics -Basic mathematics skills (adding, subtracting, multiplying, dividing) Autonomy - Capable of working independently with minimal instruction from their supervisor. Education and Experience Minimum Requirements: High School diploma Preferred Competencies: Familiarity with measurement instrumentation such as micrometers, calipers, tensile testers, video microscopes, and optical gauging products preferred. Experience working in a lab setting environment in the medical device industry. The ability to use stereoscopes and varying microscope setups. Physical Requirements: Required to stand for up to 75% of working time per shift, with walking at least 50% of working time per shift. Required to reach above shoulder frequently and below waist occasionally. Required to push and pull. Ability to lift up to 20lbs occasionally, 5-20lbs frequently. Vision capability to inspect small parts/components/labeling (Corrective lenses allowed)

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Ensure precision for mission-critical hardware!** Teledyne is seeking a detail-oriented Quality Technician to join our Salem, NH team. In this role, you'll inspect and verify Rubidium Atomic Frequency Standards (RAFS) and support quality systems that uphold the highest standards in aerospace and defense. **What you'll do** + Inspect electronic hardware to J-STD and Space Addendum requirements. + Verify assemblies against drawings, inspection procedures, and photographs. + Create inspection reports, including documentation of non-conforming hardware. + Perform mechanical inspections and verifications to specifications. + Use microscopes and advanced photo-optic systems for detailed inspections. + Review and analyze test data for final acceptance. + Conduct final packaging and shipping inspections. + Support continuous improvement processes and room audits. + Manage scrap material handling and control processes, including tickets and records. **What you need** + High school diploma or GED (required); associate degree preferred. + Detail-oriented with strong organizational skills. + Experience with ISO9001 and/or AS9100 (preferred). + Proficiency in Microsoft Excel; VBA and SQL experience strongly preferred. + Previous soldering or PCB inspection experience in electronics manufacturing. + Skilled in Word, Excel, PowerPoint, and Outlook. + Ability to collaborate and build rapport across teams. + Self-motivated and capable of managing site-wide processes independently. + Must be a U.S. Person (includes U.S. citizens, lawful permanent residents, refugees, and asylees) (required). **What we offer** + Competitive pay and comprehensive health benefits. + Medical, dental, vision, and employee assistance programs. + Disability coverage and supplemental insurance options. + 401(k) with company match and employee stock purchase plan. + Paid time off, education assistance, and voluntary benefits like pet insurance. + A collaborative environment focused on quality and innovation. **What happens next** Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the process. _Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Employment is contingent on background checks and compliance with applicable regulations._ **Salary Range:** $42,800.00-$57,100.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Free uniforms Health insurance Paid time off Training & development Vision insurance About Us We are a leading aerospace manufacturer specializing in precision-machined engine components for OEMs and the U.S. Department of Defense. Our team is committed to the highest standards of quality, compliance, and innovation in machining and inspection. Position Overview We are seeking an experienced Quality Technician with strong background in aerospace manufacturing and precision inspection. The ideal candidate will have hands-on inspection expertise, ability to write and run Coordinate Measuring Machine (CMM) programs, and at least 5 years of quality assurance experience in an aerospace environment. Key Responsibilities Develop, edit, and execute CMM inspection programs to support production and first article inspections. Perform dimensional inspection of complex aerospace components to verify compliance with AS9100, OEM, and DoD standards. Interpret engineering drawings, GD&T, and customer specifications. Support root cause analysis, corrective action, and continuous improvement initiatives. Collaborate with machinists, engineers, and quality leadership to maintain high product conformance standards. Qualifications Minimum 5 years of quality/inspection experience in aerospace manufacturing. Proven experience programming and operating CMMs (PC-DMIS, Zeiss Calypso, or equivalent). Strong knowledge of GD&T and precision measurement methods. Familiarity with AS9100, ISO, and NADCAP requirements. Proficiency in using standard metrology equipment (micrometers, bore gages, height gages, surface plates). Ability to work independently and as part of a cross-functional team.

At Spectrum Control, most departments operate on a 4-day, 10-hour work schedule in exchange for a 3-day weekend. We offer competitive wages and PTO, plus our benefits begin on day 1 of employment. Come join a workforce where we put you first! JOB SUMMARY: The Quality Technician inspects and tests materials and equipment to ensure compliance with specified drawings and procedures. ESSENTIAL JOB FUNCTIONS: Verify and inspect materials to match PO and MRP requirements in accordance with specification drawings, military standards, commercial standards, sampling plans and internal procedures as required. Perform screening of materials as specified on incoming inspection travelers and/or shop travelers. Perform first piece inspection actions and completion of AS 9102 forms required under AS9100 where applicable. Inspect devices under high-powered microscopes for verification of compliance or defect identification and initiate and submit deficiency forms on any non-compliant materials as outlined by company MRB procedures. Perform functional electrical measurements using LCR meters, multimeters and other test equipment. Program, set-up and operate the coordinate measuring machine (CMM) and perform basic maintenance and calibration on the CMM where necessary. Inspect detailed machined parts and assemblies per print requirements if in a machine shop setting. Conduct first article, first piece, in process and final inspection. Ensure compliance using mechanical measuring devices including, but not limited to: calipers, dial gauges and optical comparators and facilitate testing to ensure compliance. Maintain and organize quality documentation. Maintain critical task training and certification records. Perform quality and process improvement audits and assist manufacturing inspectors with internal and external inspections as directed. Perform other inspection, testing or quality related tasks as needed. QUALIFICATIONS: Education: High School or Equivalent Experience Years: 1-3 years Experience Type: Production, Quality Related Field OR Equivalent combination of education and experience Microsoft Office and web proficiency Able to read and interpret blueprints, operating and maintenance instructions, ISO 9000 and 9001 company procedure manuals, specifications and geometric tolerancing and bar graphs Ability to do basic math in all units of measure using whole numbers, common fractions and decimals Ability to use SolidWorks software where applicable Understanding of LAN and information systems IPC-A-610 and J-STD-001, IPC 600/3012 certification in certain areas WORK ENVIRONMENT: Manufacturing Floor Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Third-Party Recruiters Please note, that per Spectrum Control Policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters are engaged to provide candidates for a specified opening and in alignment with our values and expectations. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Spectrum Control will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. If you or your agency are interested in becoming an approved vendor please contact ************************************.

Job Description The Quality Technician - FAI Specialist is responsible for coordinating and supporting the creation of AS9102 First Article Inspection Reports (FAIR) in alignment with industry and customer specific requirements. This position works alongside various other departments and is vital to ensuring success of the AS9102 program. Duties/Responsibilities: Navigates internal company software and database systems to gather information. Accurately completes AS9102 Reports (FAIR) and other dimensional inspection reports as required. Interpret drawings, specifications and customer requirements. Works effectively and communicates with various departments, including: Planning, Marketing, Quality, QC Inspection and Source Inspection. Assures accuracy of FAI programs and records. Assists with identifying opportunities for improvement within the FAIR process to aid in the success of the Quality Department. Maintain a positive work environment by acting and communicating in a manner so that you get along with customers, clients, vendors, co-workers and management. This position may require overtime for coverage on alternate shifts and weekends. Will be required to perform other duties as requested, directed or assigned. Requirements: High School diploma or General Education Degree (GED). Previous experience as a First Article Inspection Specialist is preferred but not required. Must be able to use a computer to maintain records, develop reports, and analyze data and document discrepancies as well as using a computer to perform all other related aspects of the position. Must have excellent communication skills and ability/flexibility to work in a fast-paced environment. Must be able to read and interpret technical drawings, prints and industry/customer specifications. Must be able to read and interpret GD&T requirements. Must be able to display a thorough attention to detail and organization. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol is a proud Equal Opportunity Employer as to all protected groups, including Individuals with Disabilities and Protected Veterans. For consideration for this position, please apply online to: ********************************** APC878

Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES * Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. * Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. * Reads and interprets work instructions and to determine dimensions and tolerances. * Reads blueprints or specifications to determine dimensions and tolerances. * Collates test data and drafts quality reports. * May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. * Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. * Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. * May interpret Geometric Dimensioning & Tolerance * Strong attention to detail, organization, and documentation skills. * May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. * Assists in other areas in support of product conformity. * Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. * Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. * Complies with federal and state laws, regulations, specifications and company standards. * Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations.

Job Description At Spindrift, we're making every beverage a positive force of nature. Founded in 2010, we believe the best flavors come directly from nature. That's why every Spindrift beverage is made the hard way-with real squeezed fruit, never from concentrate. From sourcing the best-tasting fruit globally to maintaining a carefully honed manufacturing process, we believe in doing things the hard way, the intentional way, the better albeit more challenging way, the right way - because, in the end, it's worth it. Spindrift sparkling water is available nationwide, and Spindrift Spiked and Spindrift SODA is available in select markets. We are also a proud member of 1% for the planet, donating to environmental causes. Spindrift is headquartered in Newton, MA. The Quality Technician Role The Quality Technician will be responsible for supporting the Spindrift quality program across Spindrift's beverage portfolio, assist with maintenance of the retain library, assistance with recruiting and training internal sensory panelists, assist with collecting, synthesizing and archiving data as it relates to quality initiatives. Responsibilities include: Assisting the Sensory Analyst with managing the Spindrift sensory program by supporting new panelist onboarding and training, product retain tastings onsite, raw material evaluations, and standard production retains Assisting with managing the Product Retain Library to ensure it is neatly organized at all times, including maintaining an orderly process of receiving/processing product retains into the library upon arrival and the disposal/removal of out-of-date code samples Supporting the creation and organization of quality documentation (i.e. SOPs, protocols, training documents and more as needed) Collaborating with various teams within operations on the following activities: Finished product releases as needed, including review of finished micro reports and sensory evaluations Production holds as needed, including performing sensory evaluations on finished product and communicating results to relevant parties Assist with qualification of new suppliers, including performing required sensory evaluation of raw materials to determine acceptability for use Data entry and approval for specified raw materials into quality management system Assist with consumer complaint process, to include but not limited to: data entry, sample collection, investigation support Requirements Previous food safety experience, with experience in HACCP, GMP, USDA, or FDA preferred. Previous experience with SQF, ISO, GFCO, and/or FDA audits desirable Excellent verbal and written communication skills Thrives in an entrepreneurial environment and considers no task too small nor too large Consistently demonstrates accuracy, thoroughness and dependability Establishes and maintains effective channels of communications with internal and external contacts Adjusts tasks and focus in accordance with changing deadlines and priorities Available to travel up to 10% Able to work in the Newton, MA office Benefits Hourly rate for this part-time position is $22 - $25 / hour, 24-32 hours per week.