Quality control technician jobs in Odessa, TX - 33 jobs

The Quality Control Technician will be responsible for maintaining precision equipment calibration and maintenance cycles, performing dimensional inspection, reviewing in process work, electrical testing and submitting documentation associated with these job duties. This role is essential in maintaining product quality, identifying defects, and supporting continuous improvement initiatives. Key Responsibilities: At start of shift, review daily Variable Speed Drive Cabinet Intake and any applicable rush jobs. Verify associated equipment is in the Digital Document System and input information if it is not present. Print associated QR codes from Digital Document System and affix them to unit. Perform throughout day as workflow changes. Determine workflow and prioritize tasks for that day. Perform Daily Pre-Use Calibration Checks on all Precision Measuring Equipment. Ensure all equipment's unique identifiers are clearly visible and legible. Stage all inbound crates or existing pre-system stock in QC area for determined daily inspection and notify or return to inventory post inspection process. Verify all received MTRs to Material Specification Sheets and perform hardness validation test on a sample from each lot/batch. Dimensionally measure assigned lot/batch per Inspection Ratio Guidelines per print criteria callouts, including 100% sealing surface and critical point inspection on each lot/batch. Complete inspection reports and upload a copy of inspection report, print utilized for inspection and MTR verification into Digital Document System. Verify each in process and testing station has entered their associated Digital Document System criteria for all work performed that day. Ensure all pictures, videos and work verification steps have been completed and uploaded before approving units to be released for storage or shipping. If documentation is not present, have associated technician perform their job duties. Take custody, quarantine and complete Non-Conformance Reports and Management Team notifications as necessary based on inbound, in-process or testing non-conforming product. Work with operations to ensure the transfer of all records from the Digital Document System to associated Well Intelligence job files. Enter new equipment and precision instruments for calibration into the Digital Document System as needed. Assist in the development and implementation of quality control procedures and protocols. Participate in continuous improvement initiatives to enhance product quality and efficiency. Ensure compliance with all safety, quality, and regulatory standards. Perform on call duties as necessary. Requirements Qualifications: High school diploma or GED; associate's degree in a technical field preferred. Understanding of quality control, methods and testing techniques. Proficiency in using inspection and testing equipment. Excellent attention to detail and problem-solving skills. Strong documentation and reporting skills. Ability to work independently and as part of a team. Good communication and interpersonal skills. Basic computer skills, including proficiency in Microsoft Office. Ability to strictly adhere to and enforce Quality Standards in a firm but diplomatic manner. Physical Requirements: Ability to lift up to 50 pounds. Ability to stand for extended periods. Fine Manipulation Motor Skills Vision correctable to 20/20.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. We have an opportunity for a Quality Technical Team Member to be based in Columbus, GA. (onsite role) What You Will Do: Records for Blades and Disks: Input and store Columbus Forge LPA records. Maintain inventory and storage of Level 4 documentation records for Columbus Operations. Log and ballot Columbus Forge quality procedures, standard work, and forms for Columbus Operations. Check Level 4 documentation records in and out of SharePoint for maintenance by operational functional teams. Other duties as assigned. Compile and distribute results of the LPA audits to operational Business Unit Leaders. Run CAR status reports for Tier 4 meetings for Operations Leadership. Generate communication for Toolbox Talks delivered to employees to inform the workforce of key issue awareness. Process and Expedite Level 4 Documentation Ballots with operational teams. Process and expedite Level 1 through Level 3 documentation ballots with operational teams. Support Level 4 Documentation TPM with executing and expediting reviews and input, as requested. Perform 6s each shift Engage in process optimization to allow success of production/quality goals while achieving and maintaining cost savings Complete all training within the expected time given Qualifications You Must Have: HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline Minimum of 1 year of relevant work experience Qualifications We Prefer: Experience in manufacturing environment Quality assurance or quality control experience is a plus What We Offer: Medical, dental, vision and life insurance Short-term disability, long-term disability and parental leave 401(k) match Flexible spending accounts Employee assistance program Employee Scholar Program (No waiting period!) Paid time off including: 3 weeks of vacation, 5 personal sick days, 3 unpaid days for unique situations at supervisor discretion, and 12 paid government holidays Additional Information: Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship. What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

NATURAL GAS TECHNICIAN FLSA Class: NON-EXEMPT This position is responsible for the day-to-day operations and maintenance of natural gas treating and processing equipment including refrigeration, compression, and dehydration. Equipment includes but is not limited to mobile refrigeration units, reciprocating natural gas compressors, dehydrators, fluid separation equipment, vales, gas measurement equipment, etc. Essential Duties and Responsibilities: * Act as lead regarding all field gas activities. * Extensive experience working with MRU/Dehydration/Compression systems. * Provide daily oversight including- Operating equipment per operating ranges, inspecting equipment periodically to detect malfunctions or need for repair, and performing minor maintenance on equipment. * Must be willing to develop a working knowledge of fleet equipment. * Ability to troubleshoot and work through problems efficiently. * Read, monitor, and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. * De-pressure equipment. * Responsible for calculating, designing, and ensuring proper flows, temperatures, and pressure levels. * Moderate use of hand tools to work with and repair mechanical and electrical equipment. * Mechanically inclined * Understanding of simple electronics and electrical equipment is beneficial. * Will be required to complete all training including Flash Arc Training and Basic Electrical Safety Training as provided. * Must properly use ladders and safety harnesses. * Must be able to determine appropriate level of personal protective equipment (PPE) needed for the specific assigned task. * Must possess the ability to self-supervise on daily tasks and metrics. * Ability to work with a team and standalone for multiple hours. * Must present equipment, tools, and self in an orderly and tidy manner. * Be available by phone while on scheduled rotation. * Able to operate a company vehicle in a safe manner as well as maintain a clean driving record. * Comply with all safety standards and procedures. * Oversee safety and environmental requirements while operating equipment onsite along with assisting with incident response and investigations as needed. * On time completion of all assigned training * Promotes ethical behavior in all aspects of the business and lead by example. * Computer literate with the ability to utilize online forms/automation. * All other duties and responsibilities as assigned by Supervisor. Other Requirements: * Minimum 7+ years related experience, preferably in the oil and gas industry. * High School diploma, skilled labor certificate or equivalent. * Willingness to work in exposure to extreme temperatures, wind, precipitation, in addition to working at heights. * Ability to stoop, sit, stand, or be on their feet for extended period of times. * Able to lift 25 pounds up to 10 times per shift. * Mechanical Aptitude. * Valid Driver's License. * Good written and verbal communication skills. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. VoltaGrid is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment #LI-DNP

NATURAL GAS TECHNICIAN FLSA Class: NON-EXEMPT This position is responsible for the day-to-day operations and maintenance of natural gas treating and processing equipment including refrigeration, compression, and dehydration. Equipment includes but is not limited to mobile refrigeration units, reciprocating natural gas compressors, dehydrators, fluid separation equipment, vales, gas measurement equipment, etc. Essential Duties and Responsibilities: Act as lead regarding all field gas activities. Extensive experience working with MRU/Dehydration/Compression systems. Provide daily oversight including- Operating equipment per operating ranges, inspecting equipment periodically to detect malfunctions or need for repair, and performing minor maintenance on equipment. Must be willing to develop a working knowledge of fleet equipment. Ability to troubleshoot and work through problems efficiently. Read, monitor, and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. De-pressure equipment. Responsible for calculating, designing, and ensuring proper flows, temperatures, and pressure levels. Moderate use of hand tools to work with and repair mechanical and electrical equipment. Mechanically inclined Understanding of simple electronics and electrical equipment is beneficial. Will be required to complete all training including Flash Arc Training and Basic Electrical Safety Training as provided. Must properly use ladders and safety harnesses. Must be able to determine appropriate level of personal protective equipment (PPE) needed for the specific assigned task. Must possess the ability to self-supervise on daily tasks and metrics. Ability to work with a team and standalone for multiple hours. Must present equipment, tools, and self in an orderly and tidy manner. Be available by phone while on scheduled rotation. Able to operate a company vehicle in a safe manner as well as maintain a clean driving record. Comply with all safety standards and procedures. Oversee safety and environmental requirements while operating equipment onsite along with assisting with incident response and investigations as needed. On time completion of all assigned training Promotes ethical behavior in all aspects of the business and lead by example. Computer literate with the ability to utilize online forms/automation. All other duties and responsibilities as assigned by Supervisor. Other Requirements: Minimum 7+ years related experience, preferably in the oil and gas industry. High School diploma, skilled labor certificate or equivalent. Willingness to work in exposure to extreme temperatures, wind, precipitation, in addition to working at heights. Ability to stoop, sit, stand, or be on their feet for extended period of times. Able to lift 25 pounds up to 10 times per shift. Mechanical Aptitude. Valid Driver's License. Good written and verbal communication skills. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. VoltaGrid is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, and general treatment during employment #LI-DNP

Job DescriptionDescription: OFS Facility Operations | Flowback & Surface Pressure Control Equipment Force Pressure Control is seeking safety-oriented production personnel to work its Permian Basin facility located in Midland, TX. Production personnel will be tasked with inspection, rebuild, and maintenance of pressure control equipment including, but not limited to, multi-phase test separators, manual and hydraulic choke manifolds, small-bore manual and hydraulic gate valves, low-torque valves, etc. Working background with flowback & pressure control equipment is required. Local candidates only. The Production Technician position is a full time, non-exempt position. Hourly pay rate commensurate with experience. Total compensation package includes paid time off / paid holiday schedule, health / medical / ancillary benefits, and 401(k) retirement plan sponsorship. Requirements:

Job Description About Us: Peak Completions is a leading oil and gas down hole technology provider that offers in-house engineering, manufacturing, and dedicated service to operators around the globe. The foundations of our company are proprietary technology, custom design, quality tools and service, results, and cost-savings. We have become the go-to expert on liner hangers, service tools, completion tools, and fishing services with extensive oilfield experience from our team of over 200 specialists. Peak is focused on developing cutting-edge techniques and has pioneered several of today's industry best practices. With strong capabilities for customized down hole systems, we look to take on new challenges that push the limits of reducing the time and resources that are needed to successfully service and complete a well in today's economic environment. About the Role: The Quality Control Inspector plays a critical role in ensuring that all machined parts and products meet stringent quality standards before they reach the customer. This position involves conducting thorough final inspections and first article inspections to verify dimensional accuracy and adherence to specifications. The inspector will utilize precision measurement tools such as micrometers and optical comparators to assess product quality and identify any deviations. Maintaining detailed documentation and performing visual inspections are essential to support quality control processes and continuous improvement initiatives. Ultimately, this role ensures that only products meeting the highest quality standards are approved for delivery, thereby safeguarding customer satisfaction and company reputation. Minimum Qualifications: High school diploma or equivalent. 3-5 years' of proven experience in quality control inspection, specifically with machined parts. Proficiency in using precision measurement instruments such as micrometers and optical comparators. Strong understanding of first article inspection and final inspection processes. Ability to read and interpret engineering drawings and specifications. Preferred Qualifications: Certification in Quality Control or related field (e.g., ASQ Certified Quality Inspector). Experience with document control systems and quality management software. Familiarity with statistical process control (SPC) and root cause analysis techniques. Previous experience working in a manufacturing or machining environment. Strong computer skills including proficiency with Microsoft Office applications. Responsibilities: Perform final inspections on machined oilfield service and completion tools and materials, to verify compliance with engineering drawings and quality standards. Conduct first article inspections to validate new or modified production processes and parts. Utilize precision measurement tools including micrometers and optical comparators to measure product dimensions accurately. Document inspection results thoroughly and maintain organized records for quality control and audit purposes. Identify and report non-conformances or defects, collaborating with production and engineering teams to resolve quality issues. Perform visual inspections to detect surface defects, finish quality, and other visual criteria. Ensure compliance with all company quality control procedures and safety regulations. Skills: Required skills such as final inspection, first article inspection, and QC inspection are applied daily to verify that products meet all specified requirements and quality standards. Proficiency with measurement tools like micrometers and optical comparators enables precise dimensional verification critical to product acceptance. Visual inspection skills help identify surface defects and ensure aesthetic quality, while document control expertise ensures accurate record-keeping and traceability of inspection results. Quality control knowledge supports collaboration with production teams to address and resolve quality issues effectively. Preferred skills like familiarity with quality management software and statistical process control enhance the inspector's ability to contribute to continuous improvement and maintain high-quality standards. Location Requirements: This position requires full-time, on-site presence at our Midland, TX (79707 & 79706) facilities. The standard schedule is Monday - Friday; occasionally weekend work may be needed. Due to the nature of this position, there may be days when more than 8 hours is required. This position is eligible for overtime. Work Authorization Requirements: Applicants must be legally authorized to work in the United States at the time of application. We are unable to sponsor or take over sponsorship of a U.S. Employment visa (e.g. H-1B) for this position.

Job Description Magrym Consulting Inc. is seeking a qualified Construction Materials Testing (CMT) Technician in Midland, Texas. As a growing company, technicians will have the opportunity to grow with us. Candidates should be willing to work overtime and weekends as required. Duties include: Soil and Aggregate Sampling Logging materials Perform Aggregate, Soil and Concrete Testing Lab and Field work Follow ASTM and AASHTO Standards Software data entry Geotechnical sample logging Maintaining a clean working environment Accurate recording of timesheets Daily travel to and from construction sites, generally within 100 miles from the home office The ability to train to achieve minimum certificates in ACI, NICET, and/or State Testing Certificates within 6 months of hire Ability to work outside in the vicinity of large construction equipment Ability to utilize hand tools such as sledgehammers, shovels and picks Observing and documenting field activities Maintain equipment and lab vehicles In-house equipment verification General Skills: Attention to detail Basic Math, Microsoft Suite skills Excellent communication with internal and external clients General maintenance skills Strong safety focus Physical Requirements: Ability to lift 60+ lbs Stand in one place for 1 to 2 hours at a time Ability to wear appropriate PPE for hazardous materials Wear steel toe shoes as needed Ability to work indoors and outdoors in all weather conditions Ability to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl. At times, this position may be working at or on uneven terrain, varying heights, in confined spaces, or supported trenches. Requirements High School Diploma or equivalent Valid Texas Drivers License Clean driving record ACI Field Technician Certification (preferred) ACI Laboratory Technician Certification (preferred) ACI Aggregate Base Testing Technician Certification (preferred) Ability to pass a pre-employment/random drug test Associates or Bachelor degree in Civil Engineering, Architecture or Construction is a plus Benefits Dental insurance Health insurance Life insurance On-the-job training Paid time off Paid Holidays Paid training 401K Retirement plan Vision Insurance Dental Insurance Short Term/Long Term Disability

Insight Global is seeking an Engineering Technician in Midland, Texas. This position provides support using software tools to support engineering projects and day-to-day Operations of the Well Life Cycle Management team. The job progression identifies responsibilities ranging from data management to more advanced tools and skills such as performance reporting and data analysis. Job Responsibilities: - Job creation and data entry in Wellview to support day-to-day operations. - Data quality management in Wellview and work order system support. - Wellbore schematic creations via Microsoft excel. - Assist with performance reporting and analysis via Power-BI We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements Advanced knowledge of Microsoft Office Products, especially PowerBI (i.e. Word, Excel, Power Point, Outlook, SharePoint). Data Management and Entry - Wellview, Workorder system Advanced Spreadsheet creation with Complex formulas , Pivot Tables, Graph visualization capabilities Ability to perform data analysis using Wellview and/or Power-Bi Creativity, verbal and written communication skills, analytical and problem-solving ability. Previous Wells and/or Oil and Gas experience.

The Engineering Technician will provide field service and engineering support for rig monitoring systems that requires frequent travel to field offices and customer locations. The Engineering Technician is responsible for implementing technological enhancements and solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES Support, maintain and service rig monitoring data systems and technology packages Install, commission, calibrate, and repair electronic components at rig sites Ensure quality control, data integrity and reliability of rig monitoring systems Provide engineering and technical support to operations and field staff Communicate and interface with customers remotely and in person Troubleshoot and resolve rig monitoring system or data issues; perform repairs and implement corrective actions or best practices Work with operations and equipment providers to develop product improvements and preventative maintenance practices Work in partnership with suppliers, purchasing teams and establish inventory control measures Develop, benchmark and track goals and key performance indicators (KPIs) to present to internal and external customers Engage employees and customers to identify market needs, complimentary products or services and growth opportunities Analyze real time data, complex data sets and maintain databases for operational or business analysis Prepare lookbacks and generate post job reports Gather competitor strategic and tactical intelligence Define Ranger's value proposition and develop value-based selling tools Perform other duties and responsibilities as assigned. Ability to travel as required REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE This position is based in Midland, Texas and will require frequent visits to field sites Bachelor's degree in engineering or business administration Fundamental understanding of equipment and electronic systems and ability to perform required repairs Analytical and problem-solving skills Proven project management skills Collaboration, teamwork, strong interpersonal and effective communication skills Understanding and adherence to company specific and industry safety procedures General knowledge of oilfield operations or experience in field service is a plus COMPUTER Proficient knowledge of Microsoft Office including Excel; PowerBI a plus Information Technology, data science or software development a plus PRE-EMPLOYMENT REQUIREMENTS Must complete and pass all required pre-employment screenings

Do you want to build an impactful career to change the world for the better? Geosyntec has an exciting opportunity for an Engineering Technician / Senior Engineering Technician to help grow our contaminated site assessment and remediation services in Midland, Texas. The position will assist with sample collection of diverse materials including, but not limited to, soil, sediment, water, and air for environmental tests; compile construction quality assurance (CQA) monitoring data related to landfill and environmental remediation construction projects, provide neat, accurate, and comprehensive documentation of all field-related activities to senior level project personnel; and provide additional field and office support to geologists and engineers for a diverse private and public sector client base. The role requires the ability to comprehend construction plans and specifications and a strong willingness to perform extensive fieldwork and travel for extensive periods of time, including overnights, weekends, and holidays; and a strong willingness to work outdoors. An interest in building a career in the environmental consulting field is essential. Geosyntec is an innovative, international engineering and consulting firm serving private and public-sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure. Our engineers, scientists, technical and project employees serve our clients from offices across the world. Ranked by ENR as one of the top environmental engineering design firms, Geosyntec is internationally known for its technical leadership, broad experience, and exceptional client service. We invest in our people. Each employee is unique, and your career at Geosyntec will be too. We offer competitive pay and benefits, and well-being programs to support you and your family. To Learn More Visit: ********************************* Essential Duties and Responsibilities Perform field and on-site laboratory tests on soil, geosynthetics, and other materials primarily associated with landfill and/or waste containment system construction. Perform in-place moisture-density results to verify project compaction requirements are met. Oversee drilling, logging of borings, and instrumentation installation. Monitor activities on job sites to assure compliance with relevant contract documents (e.g., technical specifications, construction drawings, sampling plans, CQA plans etc.). Provide CQA monitoring on several types of construction and/or environmental activities on enviro-civil construction sites. Prepare daily and weekly field reports, construction schedules & progress reports; Assure project documentation is correct and consistent with company policy & procedures. Interact with project personnel (contractors, project managers, engineers & clients) and assist in cultivating an integrated team approach through open lines of communications and participation in work progress meetings. Assist in the preparation of the final reports, work plans, health and safety documents, and the assembly of report appendices. Observe and abide by the policies and procedures outlined in the site-specific project health and safety plans and the company's Environmental Health and Safety Management policies and procedures. Perform tasks in other company practice areas including general construction services, environmental sampling, contractor oversight, or construction quality assurance activities, as needed. Training: This position requires OSHA health and safety, radiation safety (for a portable soil moisture/density gauge), first aid, and CPR training and medical monitoring that will be paid for by Geosyntec. We also offer professional and technical development opportunities including in-house seminars, webinars, and mentoring, that allow our staff to build the technical and business skills necessary to become successful consultants. Fieldwork: Up to 100% Overnight travel: Up to 100% Drive personal, company, and rental vehicles to client or company project or office sites, and other business locations, as needed. Skills, Experience and Qualifications High school diploma or general education degree (GED) and a minimum of four (4) years of applicable experience; or an Associate degree or equivalent from a two-year college and a minimum of two (2) years of applicable experience; or a Bachelor's degree in science, construction management, engineering, physical science, environmental science, or related subjects; or equivalent combination of education, experience and training that provides the required knowledge, skills, Technical experience in construction services, geotechnical, environmental, or related engineering disciplines. (required) Practical field experience conducting operation and maintenance of mechanical systems including simple troubleshooting of mechanical and electrical systems. (preferred) Exposure to the execution of in-situ and ex-situ remediation projects technologies such as chemical injection technologies, pump and treat systems, and landfill gas recovery systems (preferred). Working knowledge of Microsoft Outlook, Excel, and Word software programs. (required) Strong mathematical background with the ability to perform calculations in basic geometry and use of algebra. (required) Ability to work both independently and as part of a team, be self-motivated and possess a strong work ethic. (required) Ability to regularly lift and/or move up to 49 pounds unaided and 50-100 pounds with assistance and/or proper engineering controls. (required) Ability to spend the workday standing and walking across construction sites when needed. (required) Ability to speak and hear, stand, walk, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl. (required) Ability to communicate verbally and in writing (e.g., emails) with peers, subcontractors, supervisors, and clients to report findings, convey ideas and explain observations. (required) Regular field work and overnight travel. (required) Health & Safety training, medical monitoring, and client-driven drug and background testing. (required) Valid U.S. driver's license, satisfactory driving record, and reliable transportation, for business travel. (required) Candidates must currently hold and maintain valid U.S. work authorization. New H-1B visa lottery and employment based green card sponsorship are not available for this position.

TETRA Technologies, Inc. is a global organization whose foundation and strength comes from the drive and dedication of our team members. We value equal employment opportunity to stimulate creativity and innovation in our workforce as we use our collective talents to develop unique solutions to address the world's energy challenges. Founded in 1981, TETRA (NYSE: TTI) is an energy services and solutions company focused on developing environmentally conscious services and solutions that help make people's lives better. With operations on six continents, the Company's portfolio consists of Energy Services, Industrial Chemicals, and Critical Minerals. In addition to providing products and services to the oil and gas industry and calcium chloride for diverse applications, TETRA is expanding into the low-carbon energy market with chemistry expertise, key mineral acreage, and global infrastructure, helping to meet the demand for sustainable energy in the twenty-first century. Visit the Company's website at **************** for more information or connect with us on LinkedIn. Essential Duties: * Safely performs analytical testing (quality control testing, manufacturing plant technical support and evaluation of new sources of raw materials and finished products) * Basic wet chemistry and use of Inductively Coupled Plasma (ICP) instrument equipment * Receiving, labeling, and analyzing samples * Assumes technical responsibilities including operating various laboratory and office equipment as necessary to meet scheduling demands * Makes personnel shifts when necessary to accommodate fluctuating workloads * Provides guidance to employees regarding pulling optimal samples from raw materials * Checks and transfers data as necessary and takes steps to correct possibly inaccurate data prior to processing * Conducts routine and random facility tours to maintain safety and proper regulations * Maintains telephone communication with various agencies and individuals concerning status of samples * Works closely with research & development team to ensure accuracy of samples Requirements: * EDUCATION: Bachelor's Degree in Science or related field preferred * EXPERIENCE: 3-5 years of relevant experience preferred * TRAVEL: 5% * OTHER: * Submit to and satisfactorily complete pre-employment background, medical, alcohol, and drug screening * Must possess a valid Driver's License * Prior experience using ICP equipment Work Environment: The requirements are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. While performing the duties of any field-based position, an employee may be exposed to various outside weather conditions including but not limited to rain, humidity, snow, and/or heat during daytime hours and/or nighttime hours. The noise level in this work environment is usually moderate to loud for extended periods of time.

Responsive recruiter We are seeking an entry level lab technician who will be responsible for performing laboratory tasks. The ideal candidate can focus and prioritize tasks in a fast-paced environment while maintaining a strong attention to detail. This is NOT an analytical lab position. This position will NOT involve running 100s of samples daily on the same piece of equipment. Position will require assembly of custom test setups, troubleshooting of equipment, and method development. The candidate will perform project-based testing of chemicals and will be cross-trained to use a variety of testing equipment. Tasks will include equipment calibration, sample preparation, and sample evaluation following established protocols. Operate, calibrate, and maintain laboratory instruments and equipment to ensure accurate and reliable results. Develop knowledge of stimulation and production chemistries to understand application, testing requirements, and parameters for performance optimization. This may include visits to well sites and customer locations to understand processes and/or aid with collection of samples. Record, analyze, and interpret data, while ensuring proper documentation and adherence to data integrity principles. Maintain a clean, organized, and safe laboratory environment, adhering to all safety protocols and regulations. Communicate effectively with management to ensure efficient workflow and clear understanding of project objectives. NO RELOCATION Pay is $21-$23 DEO Hours 8am to 5pm Qualifications Associate's or Bachelor's degree in chemistry, biology, or a related field; or equivalent experience in a laboratory setting. Familiarity with laboratory equipment, techniques, and safety protocols. Strong problem-solving and analytical skills. Strong math skills a plus. Excellent written and verbal communication skills. Familiar with PowerPoint and excel. A skill test will be required before hire. Ability to work independently. Reliable transportation & punctuality is a must. Must be located in Midland /Odessa Testing and consulting services across every segment of the upstream market. Chemical expertise and field operations experience to provide strategic support in the laboratory or the field. We deliver high-quality, un-biased chemical testing and consulting services for Oil & Gas operations. Founded in 2016 Women-Owned 20+ years of expertise in laboratory testing Patents and publications related to oilfield chemistry and applications Deliver optimized chemical programs to prevent production issues and minimize costs.

SGS is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With over 97,000 employees in 130 countries and operating a network of more than 2,400 offices and laboratories, we provide services to almost every industry by assuring quality and safety of products and services. Trusted all over the world, SGS is a market leader because we put 100% passion, pride and innovation into everything we do. We encourage new ideas. We welcome people who challenge the way we do things. And we will be 100% committed to helping you reach your full potential. Summary Responsible for safely conducting analysis and reporting of various products, such as crude oil, fuel oils, middle distillates, petroleum and petrochemicals, LPG and LNG gases as well as lubricants for the Natural Resources and Industries and Environment sectors. Job Functions * Responsible for conducting laboratory analysis (hands on working on the bench). * Complete all laboratory reports as applicable. * Understand and keep current with all laboratory analysis methods. * Assist with the maintenance and calibration of equipment. * Understand and keep current with all laboratory safety and reporting techniques. * Adheres to internal standards, policies and procedures. * Prepare chemical solutions according to standard formulas. * Other duties as assigned. Qualifications Education and Experience * High School Diploma or GED (Required) * Associates Degree in a science discipline (Preferred) * 1-year experience working in a laboratory setting (Preferred) * For Crude Assay Technician: Previous experience in crude oil assay distillation per ASTM D2892 and ASTM D5236 (Preferred) Licenses and Certifications * N/A Knowledge, Skills and Abilities * Good organization skills, detailed oriented and completes tasks in a timely manner. (Required) * Able to work in a routine repetitive fast paced work environment (Required) * Able to stand on feet for long periods of time (Required) * Ability to interpret a variety of instructions as may be furnished in oral, written, diagram, electronic or schedule form. (Required) * Acts accordingly to the SGS standards of ethics and integrity (Required) * Must be able to work with all chemicals, petrochemicals and petroleum products. (Required) * For Crude Assay Technician: Possess working proficiency of ASTM D4052, D5002, D97, D5853, UOP 163, D4294; Understands and is able to read and interpolate applicable data and tables, interpret applicable graphs and control charts, complete laboratory raw data sheets, and is able to compute rates, ratio, percents and material quantities (linear, volumetric, weight, etc.); able to synthesize information from a variety of sources and evaluate relevance as pertains to crude assay trending properties. (Required) Physical Demands of the Job * Stand: Constantly * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Constantly * Climb or balance: Occasionally * Stoop, kneel, crouch or crawl: Occasionally * Talk/hear: Constantly * Taste/Smell: Constantly * Lift/carry/push or pull: Occasionally 25 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Responsible for assisting and performing a wide range of chemical and physical analyses on petrol-fuels and chemicals. Operate equipment to control chemical changes or reactions in the processing of industrial or consumer products. Essential Functions: Work in laboratory environment wherein chemical odors may be encountered Performs assigned duties according to the current HSE laboratory safety standards Follows prescribed safety rules and regulations in performing assigned duties Collects data, documents test results, and assists in preparing reports Complete and analyze all samples accurately (water, solid, etc.) Perform and complete various technical projects in laboratory Inventory and order lab supplies as needed Follow written lab procedures manual and update manual if changes in procedures are made Qualifications: Associate's Degree from a two-year college or technical school Minimum two years related experience Be highly organized and able to follow a systematic method of performing a task. Must possess a valid driver's license Skills & Abilities: Computer Skills: Strong background in MS Office applications required. Customer Service Skills: Meet internal and external commitments, respond promptly to customer needs, and solicit customer feedback to improve service. Work Ethic: Be dependable, trustworthy, truthful, and credible in the workplace. Display a sincere desire to provide service or assistance, follow instructions, and take responsibility for own actions. Show a commitment to doing the best job possible. Physical Abilities: Lift and carry 50 pounds in various packaging. Tip and move 55 gallon drums, weighing up to 600 pounds, with the use of a drum dolly. Work Environment: A laboratory environment in a controlled atmosphere building. All employees of Jacam Chemical Company 2013, LLC , and its subsidiaries are required to adhere to the following: • Comply with all Federal, State, and Local laws • Have the ability to read, write and speak in English fluently • Adhere to guidelines, policies, and procedures as described in the Jacam handbook • Adhere to Jacam's Drug and Alcohol policy and agree to submit to random drug testing as a condition of employment ***This company reserves the right to modify, interpret, or apply this in any way the company desires. This in no way implies that these are the only duties, including essential duties, to be performed by the employee occupying this position. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE COMPANY REMAINS AN “AT-WILL” EMPLOYER. Qualified employees who require reasonable accommodations to perform the essential functions of the position should notify the Human Resources Director. ***

Full-time Description Inspect production materials and products, prepare samples and conduct testing to ensure compliance with DOT, customer, and Company standards on all materials. Prepare and maintain accurate data of testing results. Prepare various reports, work with outside vendors, agencies, and customers, and formulate specific recommendations to resolve or correct quality issues. Functional Responsibilities Exhibit a strong work ethic with the ability to take direction and work in a team setting and independently. Adhere to Permian Basin Materials Code of Conduct and company policies. Inspect, sample, and conduct routine and special laboratory testing on construction aggregates, masonry products and Ready-Mix concrete in conformance with appropriate standard test methods. Ensure quality of products during production, shipping, and at jobsites. Communicate test results to supervisors and properly document the results in a database. Prepare statistical summary quality reports. Troubleshoot plant and jobsite problems. Visually inspect material sources, stockpiles, and truckloads at ready-mix batch plants. Conduct testing and assist in plant calibrations to ensure product quality. Verify outside construction materials testing laboratory results and maintain accurate, timely records of test data, product quality and defective materials. Complies with all Safety, Health, Environmental and other Company policies and procedures. Performs other duties as directed. Competencies Product Knowledge of concrete mix design characteristics and product specifications Mathematical skills including weights and measurement conversions. Excellent communication skills - oral and written. Computer skills - Microsoft office applications Strong organization skills Certifications ACI Concrete Field Testing Technician - Grade I ACI Strength Testing Technician ACI Aggregate Testing Technician - Level I ACI Concrete Laboratory Testing Technician - Level I DOT Batch Plant Operation Certification EXPERIENCE/TRAINING/CERTIFICATIONS High School diploma or equivalent Three years laboratory testing experience in ready-mix concrete or construction aggregates properties preferred. Valid Driver's License with acceptable driving record. Requirements PHYSICAL AND ENVIRONMENTAL REQUIREMENTS Candidate must be drug free. Position requires moderately strenuous physical work. Must be able to: Lift and carry up to 100 pounds from floor to 3' - 5' occasionally, Lift, carry, push, or pull up to 50 pounds frequently, Climb in and out of equipment 50+ times per day, Climb up and down ladders occasionally, Position self to stand, bend, hold and reach for extended periods of time to install and service equipment, Use hands, fingers, and feet to operate and/or service heavy construction machinery and concrete mixers and haul trucks, Travel safely while walking and while operating heavy machinery and/or trucks over uneven terrain, roads, and pavement, See, hear, and respond to verbal, visual, and written instructions and to moving heavy construction machinery, Wear proper protective equipment including hard hat, safety glasses, high visibility clothing, steel-toed boots, and gloves, Observe all company Safety policies on company premises and while operating heavy construction machinery, Continually work in extreme hot and cold weather conditions, Work safely in wet, muddy, and slippery conditions occasionally, Environment will vary from outdoors with varying noise levels and vibrations associated with construction equipment, and exposure to building materials, dust, and dirt at operating sites to a normal office environment.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not RequiredJob Description Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. We have an opportunity for a Quality Technical Team Member to be based in Columbus, GA. (onsite role) What You Will Do: Records for Blades and Disks: Input and store Columbus Forge LPA records. Maintain inventory and storage of Level 4 documentation records for Columbus Operations. Log and ballot Columbus Forge quality procedures, standard work, and forms for Columbus Operations. Check Level 4 documentation records in and out of SharePoint for maintenance by operational functional teams. Other duties as assigned. Compile and distribute results of the LPA audits to operational Business Unit Leaders. Run CAR status reports for Tier 4 meetings for Operations Leadership. Generate communication for Toolbox Talks delivered to employees to inform the workforce of key issue awareness. Process and Expedite Level 4 Documentation Ballots with operational teams. Process and expedite Level 1 through Level 3 documentation ballots with operational teams. Support Level 4 Documentation TPM with executing and expediting reviews and input, as requested. Perform 6s each shift Engage in process optimization to allow success of production/quality goals while achieving and maintaining cost savings Complete all training within the expected time given Qualifications You Must Have: HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline Minimum of 1 year of relevant work experience Qualifications We Prefer: Experience in manufacturing environment Quality assurance or quality control experience is a plus What We Offer: Medical, dental, vision and life insurance Short-term disability, long-term disability and parental leave 401(k) match Flexible spending accounts Employee assistance program Employee Scholar Program (No waiting period!) Paid time off including: 3 weeks of vacation, 5 personal sick days, 3 unpaid days for unique situations at supervisor discretion, and 12 paid government holidays What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job DescriptionDescription: OFS Facility Operations | BOP & Surface Pressure Control Equipment Force Pressure Control is seeking safety-oriented production personnel to work in its Permian facility in Odessa, TX. Production personnel will be tasked with inspection, rebuild, and maintenance of blowout preventer inventory and associated equipment. Production personnel may, at times, be required to perform field-related tasks including, but not limited to, the rigging up / down of equipment, function testing, pressure testing, component alterations, etc. Working background with BOP and other wellhead / surface pressure control equipment is required. The Production Technician position is a full time, non-exempt position. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws. Requirements:

Magrym Consulting Inc. is seeking a qualified Construction Materials Testing (CMT) Technician in Midland, Texas. As a growing company, technicians will have the opportunity to grow with us. Candidates should be willing to work overtime and weekends as required. Duties include: Soil and Aggregate Sampling Logging materials Perform Aggregate, Soil and Concrete Testing Lab and Field work Follow ASTM and AASHTO Standards Software data entry Geotechnical sample logging Maintaining a clean working environment Accurate recording of timesheets Daily travel to and from construction sites, generally within 100 miles from the home office The ability to train to achieve minimum certificates in ACI, NICET, and/or State Testing Certificates within 6 months of hire Ability to work outside in the vicinity of large construction equipment Ability to utilize hand tools such as sledgehammers, shovels and picks Observing and documenting field activities Maintain equipment and lab vehicles In-house equipment verification General Skills: Attention to detail Basic Math, Microsoft Suite skills Excellent communication with internal and external clients General maintenance skills Strong safety focus Physical Requirements: Ability to lift 60+ lbs Stand in one place for 1 to 2 hours at a time Ability to wear appropriate PPE for hazardous materials Wear steel toe shoes as needed Ability to work indoors and outdoors in all weather conditions Ability to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl. At times, this position may be working at or on uneven terrain, varying heights, in confined spaces, or supported trenches. Requirements High School Diploma or equivalent Valid Texas Drivers License Clean driving record ACI Field Technician Certification (preferred) ACI Laboratory Technician Certification (preferred) ACI Aggregate Base Testing Technician Certification (preferred) Ability to pass a pre-employment/random drug test Associates or Bachelor degree in Civil Engineering, Architecture or Construction is a plus Benefits Dental insurance Health insurance Life insurance On-the-job training Paid time off Paid Holidays Paid training 401K Retirement plan Vision Insurance Dental Insurance Short Term/Long Term Disability

TETRA Technologies, Inc. is a global organization whose foundation and strength comes from the drive and dedication of our team members. We value equal employment opportunity to stimulate creativity and innovation in our workforce as we use our collective talents to develop unique solutions to address the world's energy challenges. Founded in 1981, TETRA (NYSE: TTI) is an energy services and solutions company focused on developing environmentally conscious services and solutions that help make people's lives better. With operations on six continents, the Company's portfolio consists of Energy Services, Industrial Chemicals, and Critical Minerals. In addition to providing products and services to the oil and gas industry and calcium chloride for diverse applications, TETRA is expanding into the low-carbon energy market with chemistry expertise, key mineral acreage, and global infrastructure, helping to meet the demand for sustainable energy in the twenty-first century. Visit the Company's website at www.onetetra.com for more information or connect with us on LinkedIn. Essential Duties: Safely performs analytical testing (quality control testing, manufacturing plant technical support and evaluation of new sources of raw materials and finished products) Basic wet chemistry and use of Inductively Coupled Plasma (ICP) instrument equipment Receiving, labeling, and analyzing samples Assumes technical responsibilities including operating various laboratory and office equipment as necessary to meet scheduling demands Makes personnel shifts when necessary to accommodate fluctuating workloads Provides guidance to employees regarding pulling optimal samples from raw materials Checks and transfers data as necessary and takes steps to correct possibly inaccurate data prior to processing Conducts routine and random facility tours to maintain safety and proper regulations Maintains telephone communication with various agencies and individuals concerning status of samples Works closely with research & development team to ensure accuracy of samples Requirements: EDUCATION: Bachelor's Degree in Science or related field preferred EXPERIENCE: 3-5 years of relevant experience preferred TRAVEL: 5% OTHER: Submit to and satisfactorily complete pre-employment background, medical, alcohol, and drug screening Must possess a valid Driver's License Prior experience using ICP equipment Work Environment: The requirements are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. While performing the duties of any field-based position, an employee may be exposed to various outside weather conditions including but not limited to rain, humidity, snow, and/or heat during daytime hours and/or nighttime hours. The noise level in this work environment is usually moderate to loud for extended periods of time.