Quality control technician jobs in Pico Rivera, CA - 792 jobs

Assured Nursing is seeking a travel Cath Lab Technologist for a travel job in Long Beach, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: 02/02/2026 Duration: 13 weeks 40 hours per week Shift: 10 hours, days Employment Type: Travel Assured Nursing is currently seeking a Cath Lab Tech for a contract position in Long Beach California. This is a 6a-4p, 06:00:00-16:00:00, 10.00-4 position in the 757000 Cath Lab Tech - Long Beach. The ideal candidate will possess a current state license as a Cath Lab Tech and have at least 2 years of recent experience as a Cath Lab Cath Lab Tech. Assured Nursing Job ID #35427973. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Tech:Cath Lab,06:00:00-16:00:00 Benefits Weekly pay Holiday Pay 401k retirement plan Referral bonus Medical benefits Dental benefits Vision benefits

Perform on-line inspections on component and finished product audits with support to receiving inspection. Tests and inspects products at various stages of production process and compiles statistical data (location specific) to determine and maintain quality and reliability of products. Releases conforming lots, documents non-conforming lots and assures record accuracy for traceability according to established inspection procedures and work instructions. Supports and documents the results of the calibration system, test method validation and pest management systems (location specific). Basic Qualifications - High school diploma or GED required - 0-3 years of work experience or equivalent. - Math and problem-solving skills equivalent to a high school education. Preferred Qualifications - 5 or more years of work experience or equivalent and/or certification (CQT, CQI, CQA etc.) through a recognized body such the ASQ American Society of Quality and works under limited supervision. - Knowledge of process capability. - Test Method Validation $22-24hour

Anders Group is seeking a travel Cath Lab Technologist for a travel job in Thousand Oaks, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: ASAP Duration: 13 weeks 40 hours per week Shift: 10 hours, days Employment Type: Travel Anders Group Job ID #966932. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Backfill - Travel Cath Lab Tech (746) 6:30AM- 5:00PM / 13 Weeks About Anders Group WHY ANDERS? Anders Group is a Joint Commission accredited staffing agency and stands out from other agencies by our commitment to making sure our travelers are given the best customer service. Our team works hard to find the best jobs with the most aggressive rates! Anders Group offers rewarding assignments and competitive compensation packages, nationwide! We offer the following benefits from day one: Health Insurance, Including a Buy-up Option Dental Insurance Vision Insurance Life Insurance 401(k) Licensure Reimbursement Premium Pay Packages CEU Reimbursements Daily Per Diems Travel Reimbursements Rental Car Allowances Continuing Education Resources Referral Bonus And Many More! THE ANDERS DIFFERENCE You're committed to providing exceptional healthcare. We're committed to you. Anders Group was founded by a team of healthcare recruiters who had built strong relationships with healthcare facilities and professionals nationwide. As staffing firms shifted their focus to numbers and margins, these recruiters saw a need for a company to take a different approach to staffing. Anders Group was founded in 2010 to do just that. We focus on individual and facility goals to make quality placements. Great people working with great facilities make for the best placements. Through our focus on providing the best experience to Allied and Nursing health care professionals, Anders Group has grown to be a top staffing firm in Healthcare. We look forward to working with you! Benefits Medical benefits Dental benefits Vision benefits Life insurance 401k retirement plan License and certification reimbursement Continuing Education Referral bonus

Job Title: Quality Control Technician II Compensation: $23.00 - $26.00 Hourly (Non-Exempt) Advantech is seeking a Quality Control Technician II to support advanced quality inspection and process adherence across our manufacturing and hardware operations. This role requires a deeper level of technical expertise, the ability to work independently, and experience identifying, documenting, and escalating complex quality issues. The Quality Control Technician II plays a critical role in ensuring products meet Advantech's quality standards prior to shipment. Responsibilities: Perform advanced cosmetic, functional, and hardware inspections on components and finished products Execute inspections based on engineering specifications, drawings, schematics, and quality requirements for Advantech and locally fabricated products Maintain and follow inspection guidelines, SOPs, and quality records across assigned QC functions, which may include IQC, IPQC, FQC, OQC, and ECOM Maintain inspection databases and documentation to ensure traceability and record retention Perform hardware modification and rework to meet quality and specification requirements Identify, document, and escalate specification discrepancies, defects, or quality concerns to QC Specialists and QC Supervisors Work independently on assigned inspections and projects while supporting additional quality initiatives as needed Qualifications: Minimum 5 years of professional experience in Quality Control, electronics, or computer hardware-related roles AA degree, technical certification, or equivalent professional experience Strong working knowledge of computer hardware inspection and quality control guidelines Proficient in Microsoft OS installation and troubleshooting Proficient in Microsoft Office Suite Ability to interpret technical documentation, drawings, and specifications High attention to detail with the ability to identify subtle defects or deviations Preferred Qualifications: Experience supporting multiple QC functions in a manufacturing or hardware environment Experience with hardware rework or modification Familiarity with quality documentation systems and traceability requirements Benefits: Competitive salary dependent on experience (DOE) Winning culture with a friendly, team-oriented environment! Generous benefits package including medical, dental, vision, long-term disability, and life insurance. Employee Assistance Program (EAP) 401(k) with company match Education & personal development reimbursement program Generous vacation and paid holidays package Company events, and lunches Referral Bonus About Advantech Founded in 1983, Advantech is a leader in providing trusted innovative embedded and automation products and solutions. Advantech offers comprehensive system integration, hardware, software, customer-centric design services, and global logistics support; all backed by industry-leading front and back-office e-business solutions. Advantech has always been an innovator in the development and manufacture of high-quality, high-performance computing platforms. We cooperate closely with our partners to help provide complete solutions for a wide array of applications across a diverse range of industries. To realize our corporate vision of Enabling an Intelligent Planet, Advantech will continue collaborating and partnering for Smart city & IoT Solutions. World-class Recognition Advantech is an authorized alliance partner of both Intel and Microsoft . Our customers will find the technologies we use inside our products to be widely compatible with other products in the global marketplace. In 2018 and 2019, Interbrand, the world-renowned brand consulting firm, once again recognized Advantech efforts to build a trusted, global brand; it also symbolizes a promise we gave to our business partners, which was to do our best to keep building a trustworthy brand that is recognized everywhere in the world. Advantech was selected as Interbrand's #5 best Taiwan Global Brand in 2018. Work Authorization: To conform to U.S. Government export regulations (ITAR), applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8. U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. More information can be found at Advantech is proud to be an Equal Employment Opportunity employer. We accept applications directly from candidates only and will not be responsible for any recruiting agency fees absent a formal agreement.

Los solicitantes son considerados para puestos dentro de la empresa sin distinción de raza, color, credo, religión, sexo, orientación sexual, género, identidad y / o expresión de género, edad, origen nacional o ascendencia, discapacidad física o mental, estado militar o veterano protegido. , estado civil o parental, condición médica no relacionada con la capacidad de la persona para realizar el trabajo, embarazo, información genética, afiliación política, ciudadanía o cualquier otra base protegida por las leyes federales, estatales o locales. Cualquier oferta de empleo depende de la finalización exitosa de un examen de abuso de sustancias previo al empleo y el examen físico, la verificación de documentos relacionados con su derecho a trabajar en los Estados Unidos utilizando E-VERIFY y la finalización de los documentos de empleo requeridos GRISWOLD INDUSTRIES Job Description Quality Control Calibration Technician JOB DIMENSIONS: Job Summary: Under general supervision, performs calibration on all measuring equipment, ensuring conformance with company quality guidelines; uses precision measuring instruments; and perform other related duties as assigned. Reports to: Quality Control Supervisor Examples of Duties and Responsibilities: Performs calibration on measuring instruments and record findings in file system; Keeps up with schedule for recall and calibration of measuring instruments; Prepares gages for shipment to suppliers, including creation of packing lists; Uses Microsoft Excel spreadsheet & other related computer programs to maintain & store calibration records, and create new ones as needed; Carefully handles and maintain delicate measuring instruments; Performs basic adjustments and repairs on measuring instruments; Keeps work area clean; Notifies supervisor of any instruments found significantly out of tolerance; Advises production and purchasing on appropriate choice of gages for use in machine shop, and for suppliers; Advises and recommend new measuring instruments, as appropriate; Arranges for outside services to calibrate standards on schedule; Explains calibration process clearly to external auditors and visitors, as needed; Regular punctuality, attendance, and absence reporting in conformance with company policies is essential to the successful performance of this position; and Fully comply with company rules, policies, procedures, and safety guidelines to ensure safe and effective operations. QUALIFICATIONS GUIDELINES: Any combination equivalent of, but not limited to, the following. Experience/Training/Education: Minimum education: High School Diploma or equivalent; some experience, training and/or certification instrument calibration, and inspection or machining techniques and procedures, preferably within a manufacturing environment. Knowledge/Skills/Abilities: Ability to read and interpret blueprints and work specifications; Ability to use standard precision measuring instruments to check linear, angular and circular configurations to tolerances of .00001"; Ability to clearly communicate both verbally and in writing; Ability to work cooperatively with others; Ability to effectively attain adherence to quality control standards and practices; Ability to work in laboratory environment of 68°F and 50% humidity for extended hours; Knowledge of appropriate use of various measuring instruments; Familiarity with keyboarding on typewriter and computer; Intermediate level knowledge of Microsoft Excel and ability to learn and use other computer software programs, as applicable; and Possess self-motivated nature to stay on schedule and meet heavy workload demands. Physical Requirements: Ability to stand for extended periods of time; Ability to crouch, bend, and reach materials to inspect large items; Must be able to move into confined areas to check specified items in machine shop; Ability to lift and move materials weighing 25 pounds or less; Manual dexterity may be required to rotate and inspect small components and materials; Most work tasks are performed indoors where temperature is moderate and controlled by office environment systems; Ability to work (sit and/or stand) at a desk for the majority of the work day; walking and/or standing may be required for the remainder of the work day. Length of time performing these physical requirements may vary from day to day and task to task; Requires grasping, writing, sitting, standing, walking, repetitive motions, pulling, pushing, listening and hearing ability, and visual acuity; Ability to operate office equipment such as computers, printers, multi-line touch tone phone, filing cabinets, facsimile (FAX) machines, photocopiers and other office equipment as applicable; and Ability to perform essential functions of the job, as defined; Reasonable accommodations provided upon request Special Requirements: None. Griswold Industries es un empleador que ofrece igualdad de oportunidades, ¡POR ELECCIÓN! El AAP VEVRAA de Griswold Industries está disponible para que cualquier empleado o solicitante de empleo lo inspeccione si lo solicita. • El AAP está disponible para inspección en la oficina de Recursos Humanos, ubicada en 860 W. 17th St, Costa Mesa, CA 92627, entre las 7:00 a.m. y las 2:00 p.m., de lunes a viernes, con la excepción de los días festivos y los períodos de cierre. El rango de pago representa el extremo bajo y alto del rango salarial que razonablemente esperamos pagar por esta posición en el momento de la publicación. La posición salarial de un empleado dentro del rango salarial se basará en varios factores, incluyendo, pero no limitado a, la ubicación geográfica, la experiencia, la educación, las habilidades, las calificaciones, el rendimiento y las necesidades comerciales u organizacionales.

Kelly Science & Clinical is seeking an experienced Quality Control Chemist for a 6-month contract opportunity with one of our clients, a leading small molecule CDMO at their Irvine, CA facility. If you're passionate about bringing the latest scientific discoveries to life and are ready to take the next step in your career, trust The Experts at Hiring Experts. Workplace: Onsite in Irvine, CA. Pay rate: $34-38/hour Position title: Quality Control Chemist III Position type: 6-month contract Overview We seek a highly skilled and experienced Quality Control Chemist to join our dynamic team in Irvine, CA. As a member of our Quality Control Department, you will play a pivotal role in ensuring the quality and integrity of our pharmaceutical products through meticulous analytical testing and method development. Responsibilities Perform method validation, verification, transfer, and analytical testing for clinical submission materials, including raw materials, finished products, stabilities, and cleaning validation. Maintain and troubleshoot analytical instrumentation. Perform and document laboratory investigations, as necessary. Peer review data generated by other chemists and technicians. Develop, validate, and troubleshoot analytical methods. Conduct method transfers from other facilities and departments. Author standard operating procedures and analytical methods. Perform and/or assist with equipment calibrations and qualification. Assist laboratory management with laboratory employee training. Assist laboratory management in preparation for internal, customer, and agency audits. Qualifications Bachelor's degree in chemistry or related discipline. 5+ years' experience in a chemistry laboratory, or equivalent combination of education and experience. 5+ years' experience with analytical instrumentation, such as HPLC, GC, CE, ICP, FTIR, and dissolution apparatus required. 2+ years' experience in GLP or GMP (preferred) environment. Ability to follow standard operating procedures. Strong communication skills, both written and verbal. Ability to organize, prioritize, and effectively perform concurrent tasks with minimal supervision. Strong attention to detail. What happens next: Once you apply, you'll proceed to the next steps if your skills and experience look like a good fit. But don't worry - even if this position doesn't work out, you're still in our network. That means our team of expert Science & Clinical recruiters will have access to your profile, making your opportunities limitless.

Quality Control Supervisor - Full-time Onsite Leach International Corporation designs and manufacturers relays, electronic control devices, and power systems primarily for the aerospace and defense industry. We welcome people who share our determination and high standards to join us in doing work that moves the world forward. Leach is known for design excellence and commitment to quality and reliability since 1919. This 100-year legacy includes the invention of the electrical relay for aircraft systems which has supported the development of the world's aircrafts. Our equipment and components are used on thousands of aerospace, military, rail and high-end industrial applications worldwide, in the most severe environments when reliable and performance are mission critical. Job Overview Title: Quality Control Supervisor Location: Buena Park, California Type: Full-Time Onsite Salary Range: $78,000 - $95,000 (based on education and experience) Job Summary The Quality Control Supervisor is responsible for the supervision, training and discipline of all subordinate staff and for ensuring that all receiving, in-process and final inspection personnel have the required inspection skills and training for the tasks assigned to them. Acts as the primary contact between manufacturing/production, purchasing, and planning personnel and receiving inspection and is responsible for ensuring that suitable inspection personnel are available as required to meet requirements at all inspection points. Responsible for the control and preliminary disposition of all non-conforming materials and coordination with manufacturing engineering, quality engineering and supplier quality assurance. Primary Responsibilities Schedule work leads and personnel, including over-time, as necessary, to support manufacturing requirements. Ensures that the inspection department operates as efficiently and effectively as possible. Serves as a backup with inspection related activities to ensure priority jobs are processed in accordance with schedule demands, including after hour and weekend support. Reviews and approves work records of those employees under his/her supervision. Responsible for ensuring that all applicable Quality Assurance requirements documented by Leach and its customers are satisfied with 100% compliance. Coordinate all customer source inspection activities. Maintains appropriate communication between the Inspection Department and all other internal departments to ensure timely and accurate flow of information. Responsible for the training and applicable certifications of all inspection personnel to ensure compliance to existing procedural and drawing requirements. Reports regularly to management any area experiencing problems so that management, in turn, can seek effective solutions. Initiate revision to Quality Assurance documents, to better control the flow of work through the various Inspection areas or to clarify specific inspection requirements. Coordinates with Quality Engineering, Manufacturing Engineering and Design Engineering Departments to resolve non-compliance issues and MRB activities. Participates in the coordination of corrective actions with supplier quality engineering for discrepant material received. Responsible for informing QA management of the budgetary requirements for those departments under his/her jurisdiction, when required. Responsible for constant appraisal of the progress of all employees under his/her jurisdiction. Responsible for taking appropriate remedial actions such as re-training or formal disciplinary action when a specific employees' performance does not meet company requirements. Assists in completion of internal audits, such as System Audits, Product Audits and Process Audits. Required to schedule and conduct annual solder training recertification for all required employees to ensure compliance and continued support to production. Basic Qualifications At least 5 years' experience in the inspection of electro-mechanical parts and assemblies, with at least two years in a supervisory or lead position. Bachelor's degree or equivalent education. Must have very good understanding of inspection practices and methods as required in a leading manufacturer supplying high reliability assemblies to the aerospace industry. Must have very good communication skills and the ability to teach and mentor subordinate inspection personnel. Must have the ability to simultaneously handle multiple projects and tasks. Train the Trainer Solder Certification Skills ISO 9001 or AS 9100 basic knowledge FAA Part 145 basic knowledge NADCAP Special Processing basic knowledge Ability to work with MS Word and EXCEL Ability to interpret manufacturing and engineering specifications Ability to interpret engineering drawings per GD&T ASME Y14.5 Ability to use various measurement equipment to verify conformance Actively certified to IPC-A-610, IPC-A-620, J-STD-001 Knowledge of ERP system with respect to transactions and Quality Control Competencies As an individual contributor you will be expected to demonstrate the following competencies: Customer Focus, Listening, Problem Solving, Action Oriented, Composure, Functional/Technical Skills, Ethics and Values, Integrity and Trust and will need to Value Diversity. Must be authorized to work in the U.S. To conform to U.S. Export Control Regulations, applicant should be eligible for any required authorization from the U.S. Government. Equal Opportunity Employer, Including Disability/Vets Privacy Policy:

Schedule: 9/80 1st The Electro Optical Infrared Systems (EOIS) line of business within DRS has locations in Dallas and Austin, TX, Melbourne, FL, and Cypress, CA. EOIS develops, manufactures, and supports infrared and electro-optical solutions for soldiers, ground vehicles and airborne platforms. We offer an exciting and challenging work environment, a competitive salary and benefits package, and a business culture that rewards performance. Employing the world's brightest. Supporting the world's bravest. Job Responsibilities Perform inspection activities, to assess conformance of products to the design as defined by the engineering drawings and/or models Inspect products, components, subassemblies, and/or systems to ensure conformance to requirements Create organizational value by implementing innovative solutions and best practices involved in all processes of the product realization value stream Assist Quality Engineers with identifying non-conforming conditions of products that present existing or impending defective conditions at the system or subsystem level of assembly Assist Quality Engineers prepare inspection plans and checklists for inspection Assist Quality Engineers with data collection and root cause analysis investigations Generate discrepancy notices and initiate Material Review Board actions Perform material movement transactions after completing inspection process May specialize in receiving inspection, in-process inspection, process verification/auditing, final inspection, etc Support, communicate, reinforce and defend the mission, values and culture of the organization Qualifications Associates or higher degree required or equivalent experience. 2+ years quality experience in a manufacturing/electronics environment. Space Microelectronics experience highly desired. Experience reading mechanical/blueprint drawings and able to verify parts dimensions against drawing requirements Experience with AS9100 standards desired. In-depth knowledge of relevant manufacturing standards (such as J-Std-001/IPC-A-610) or common mechanical techniques (such as soldering, geometric dimensioning, and tolerance practices) Ability to use various measurement devices (calipers, pin gauges, go/no-go gauges, etc) to verify mechanical part compliance Experience using a Coordinate Measuring Machine (CMM), Optical comparator or other complex inspection systems is desired Ability to effectively interpret data and present as information and respond to questions from engineers and other technical staff Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions U.S. Citizenship required. This position requires an active DOD security clearance or the ability to obtain such clearance within a reasonable time after commencement of employment. The salary range for this position is $25.29/hour-$31.57/hour. This range reflects the good faith estimate of pay the employer is willing to offer at the time of posting. Several factors can influence the pay scale, including but not limited to: Federal contract labor categories and contract wage rates, collective bargaining agreements, geographic location, business considerations, scope, and responsibilities of the position, local or other applicable market conditions, and internal equity. Other factors include the candidate's qualifications such as prior work experience, specific skills and competencies, education/training, and certifications. In addition to base pay, employees may be eligible for: annual performance-based bonuses, equity awards, and overtime pay (for non-exempt employees as applicable. Our benefits package includes comprehensive health insurance (medical, dental, vision), employer matching 401(k) retirement plan, paid time off including vacation, holidays, and sick leave (including ant state-mandated paid sick leave), parental leave benefits, tuition reimbursement, professional development support, and life and disability insurance coverage. Taking care of our people is a top priority at Leonardo DRS. We are proud to offer competitive salaries and comprehensive benefits, including medical, dental, and vision coverage, a company contribution to a health savings account, telemedicine, life and disability insurance, legal insurance, and a 401(k) savings plan. We champion wellness programs that focus on physical, emotional, and financial well-being. We develop our talent by offering programs and activities to support career-growth, professional development, and skill enhancement. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours. *Some employees are eligible for limited benefits only Leonardo DRS, Inc. and its subsidiaries provide equal opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws. Our Vision. To be the leading mid-tier defense technology company in the U.S. Our Values. The Leonardo DRS culture is defined by our Core Values and Principles: - Integrity - Agility - Excellence - Customer Focus - Community & Respect - Innovation We strive to uphold them in all aspects of our business practices to inspire our employees and provide outstanding support for our customers.

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Summary Apply quality inspection methods to verify that our product meets the design data, customer requirements and government regulations Essential Duties and Responsibilities include the following. Other duties may be assigned. Read and interpret drawings, diagrams, blueprints, specifications, purchase order, customer orders, work orders, Travelers, Test Reports Inspection of electronic equipment with its sub-assemblies like circuit cards, power supplies, wire harnesses, chassis assemblies, final unit assemblies for compliance with engineering drawings, customer requirements, Customer Order, FAA, ISO/AS9100 and other regulatory agency requirements Inspect to workmanship standard and acceptance criteria for electrical/electronic assemblies or electronic systems or support structures and components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, crimps, stakes, screws, welds, solders, press fits, or performs similar operations to join or secure parts in place Inspect dimensions and clearances of parts for conformance to drawing, specifications, using instruments, such as micrometers, calipers, feeler gauges, height gauges, and other quality inspection tools. Performing/Reporting First Article Inspection (FAI) and issue FAI reports per AS9102B, include per Geometric Dimensioning and Tolerancing (GD&T) ASME Y14.5-2009 requirements Working knowledge of or certified in IPC-A-600, IPC-A-610, IPC-A-620 workmanship Standard Inspect Test Reports to ensure conformance to test specifications Verify configuration level for hardware and software products Pull together Conformity data-package for unit shipment, or to present to show customer product/process requirement conformance Familiar with assembly methods and processes of electronic units in an ISO-9001 / AS9100 manufacturing environment Must be able to document inspection findings, complete rejection reports communicate inspection findings and concerns with manufacturing and other Quality personnel as well as understand and follow written company procedures and processes Supervisory Responsibilities None at this time Competencies To perform the job successfully, an individual should demonstrate the following competencies: Ethical conduct - Will treat everyone with respect, inspires the trust of other, follows policies and procedures and supports organization's goals and values. Stress Management/Composure - Ability to perform under pressure and demonstrate tact and composure. Problem Solving - Identifies and resolves problem in a timely manner, demonstrates problem solving and troubleshooting skills. Technical Capacity. Communication Proficiency - Clearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message. Analytical Skills - Skill and ability to: collect, organize, synthesize, and analyze data, summarize findings; develop conclusions and recommendations from appropriate data sources. Collaboration - Works effectively and cooperatively with others; establishes and maintains good working relationships. Customer Focus - Makes customers and their needs a primary focus on one's actions; develops and sustains productive customer relationships. Performance Management. Results Driven. Diversity - demonstrate knowledge of company EEO policy and promotes and harassment-free environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); at least five to seven years' of related experience and/or training; or equivalent combination of education and experience. Computer Skills Proficient in Microsoft Office Applications: Outlook, Windows, Word, Excel, Access Certificates, Licenses, Registrations Current IPC-610 or IPC-620 certification strongly preferred Other Skills and Abilities Minimum 5 years' experience in the inspection of avionics units or electronic equivalent systems. Proficiency in using calipers, micrometers, scales, PC-Windows experience and accuracy in data entry. Maintained knowledge in IPC-610 or IPC-620 workmanship STD. Other Qualifications U.S. Person required due to ITAR restrictions Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday within one hour plus/minus of 6.30 a.m. to 4:00 p.m. This position may require long hours and frequent weekend work. Physical Demands While performing the duties of this job, the employee is occasionally required to standing and walking. The employee is frequently required to Sit, Use hands to finger, handle or feel; occasionally reaching with hands, stoop, kneel, crouch, or crawl. The employee is continuously required to lift and/or move up to 10 pounds and regularly; required to lift and/or move up to 25 pounds occasionally. Special vision requirements include, color vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work Environment While performing the duties of this job, the noise level in the work environment is usually moderate; occasionally by fumes or airborne particles and toxic or caustic chemicals. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities or activities may change at any time with our without notice. Salary Range: $42,800.00-$57,100.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne conducts background checks on qualified applicants who receive a conditional offer of employment in accordance with applicable laws, regulations and ordinances. Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing. All qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Eaton's IS AER FMC division is currently seeking a Quality Inspector II - 1st Shift. is $29.00 per hour. The hours for this shift are 5:30am - 2:30 pm. is also eligible for a variable incentive program. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: PRIMARY FUNCTION: Reports to the Quality Supervisor or designated authority. Responsible for performing in-process and/or outbound dimensional and visual inspections of component parts, assemblies, and sub-assemblies as required. ESSENTIAL FUNCTIONS: Inspects (receiving, in-process and outbound) aerospace component parts, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements. Other duties and/or responsibilities may be performed as part of cross-training or employee development plan. Responsible for review and acceptance of paperwork and documentation used in the acceptance of product. Responsible to produce necessary manual or computer generated inspection reports to accept or reject products. Inspection involves using measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, surface plates, and optical comparator. Completes data processing move transactions as required. Possesses basic understanding of geometrical tolerancing and dimensional measurements per ASME Y14.5. Possesses in-depth knowledge of AQL sampling selection per internal procedures or ANSI/ASQC Z1.4 or as directed by customers. Possesses minimum of five years of experience in first article inspection reports per AS9102. Possesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports. Experience working in FAA environment. In-depth knowledge of DFAR and Nadcap requirements. Basic knowledge of customers' DQCR/DSQR programs and website portals. Evaluates and adheres to all flowed down contractual (internal and external) requirements of customer purchase orders, suppliers purchase orders for commercial and/or military products. Qualifications: BASIC QUALIFICATIONS: • High school diploma or General Education Degree (GED). • Five years minimum related experience or training; or equivalent combination of education and experience in mechanical inspection of aerospace products. • Relocation is not offered for this role. Candidates must reside within a 50 mile distance of the Irvine , CA facility to be considered. • This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee PREFERRED QUALIFICATIONS: Knowledge or experience inspecting various types of materials (e.g., aluminum, alloy, titanium, stainless steel, etc.). Knowledge or experience inspecting aerospace products with coatings (e.g., anodizing, cadmium plating, chromium plating, nickel plating, zinc plating, passivation, etc.). College or ASQ (American Society for Quality) certification a plus. Experience working in FAA environment #IND123 #LI-SB2 Position Criteria: We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Purpose and Objectives: • Inspects materials and products such as machined parts, forgings and castings for conformance to specifications, quality standards, dimensional accuracy, and customer requirements Job Description: • Verifies specified dimensions of product or material using a variety of standard inspection tools such as micrometers, indicators, and calipers. • Visual inspection of product to applicable blueprints, and manufacturing plans. • Document inspection results in accordance with company procedures, manufacturing plan, and any additional work instructions. • Determines conformance of parts, materials, and processes to specifications. • Identify and control all nonconforming products. • Performs standard operations on coordinate measuring equipment. • Performs calibration of basic measuring instruments such as calipers, micrometers, bore gauges, etc. • Assists in performing receiving inspection operations checking for conformance to specifications and blueprint requirements. • Performs preventive maintenance on coordinate measuring and other inspection equipment. • Follows and complies with safety rules, regulations, and work instructions. • Operate CMM Machines: Run Coordinate Measuring Machines (CMM) to perform dimensional inspections on parts and assemblies, ensuring adherence to engineering specifications. • Issue Quality Alerts: Identify non-conformances and promptly issue quality alerts to notify relevant departments and initiate corrective actions. • Document Findings: Record inspection results accurately in quality systems and maintain traceability of inspected parts. • Support Investigations: Assist in quality investigations and collaborate with engineering and production teams to resolve issues. • Follow SOPs and Standards: Adhere to standard operating procedures, safety guidelines, and ISO quality standards. • Meets attendance policy requirements. • Contributes to team effort by assisting in areas as needed. Experience and Skills: • Experience operating CMM equipment and interpreting measurement data. • Familiarity with quality alert systems and containment protocols. • Strong attention to detail and ability to follow technical documentation. • Basic understanding of GD&T and inspection tools (calipers, micrometers, etc.). • Effective communication and teamwork skills • Perform Containment Activities: Execute containment procedures to isolate defective products, prevent further processing, and support root cause analysis. • High school diploma or general education degree (GED). • Experience using micrometer, calipers and other hand measuring tools. Description of Ideal Candidate: • Ability to perform job functions with little or no supervision. • Strong attention to detail. • Basic computer skills required. • Willing to work overtime as required. Physical Demands and Work Environment: • While performing the duties of this Job, the employee is regularly required to talk or hear. • The employee is frequently required to stand and sit. • The employee is occasionally required to walk and reach with hands and arms. • The employee must occasionally lift and/or move up to 20 pounds. • Specific vision abilities required by this job include close vision and color vision. • Work environment includes front-office and manufacturing, with some changes of temperature. • The noise level in the work environment is usually moderate. Class Code: 3632 Compensation Information: $18.68-$24.66 ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Responsible for inspection and test requirements at all stages of manufacturing to ensure customer requirements. The Inspector is also responsible to record and report any defects and ensure the defects are corrected before delivery to the customer. Committed member to the Quality and Production teams and adaptable to changing roles within the Quality function. Primary Responsibilities Carries out and coordinates all inspection and test requirements as outlined in the Quality Procedure Manual and contract requirements including compliance with the requirements of AS 9100. Maintains relevant updated specification, standard and quality systems documents. Performs assigned tests on materials and parts, product in process, and finished product. Inspects visually for obvious defects. Compares results with drawing and specification requirements. Reports problems with inspection and test results to Quality Supervisor. Identifies defectives and segregates from acceptable product. Notifies Quality Supervisor and Quality Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted. Records results on inspection forms or charts and report number of defects found. Makes recommendation on disposition of suspect/defective product to Quality Supervisor. Supports the quality record retention requirements by assisting with filing and maintenance of Quality Records. Experience with a 3D scanner or Faro Arm Other duties as assigned. Qualifications Quality Inspector - Scanner Working knowledge of Quality Assurance standards. Excellent verbal and written communication skills in English. Ability to read blueprints. Good interpersonal skills and ability to work as a team member, as well as independently. Ability to communicate with all levels within Productions and get messages across that has the desired effect. Ability to think critically and act logically to evaluate situations and generates required steps to ensure success. Persistence and determination when problem-solving. Strong focus on quality: ability and commitment to achieve total customer satisfaction in the quality of our products, services and decisions, implement systems and processes focused on excellence and continuous improvement. Strong focus on safety, including personal safety, safety of co-workers, and protection of property on the job in accordance and compliance with company practices, industry standards, and government regulations. Knowledge of AS 9100 Quality Systems. Knowledge of calibration requirements/procedures. Proficiency with computer based applications. Microsoft Excel a must. Kirkhill, Inc. Competencies Approachability Teamwork Customer Focus - Knows and understands the needs of internal and external customers. Is results oriented and works hard to consistently provide exceptional service. Ethics and Values - Adheres to an effective set of core values and beliefs and acts in accordance. Rewards the right values and disapproves of others. Problem Solving - Looks beyond the obvious to find effective solutions. Integrity and Trust - Widely trusted and seen as direct and truthful. Functional/Technical Skills - Possesses the skills to be effective in the job. Has the skills to perform the job at a high level of accomplishment. Listening - Practices active and attentive listening, able to hear others. Action-oriented - Full of energy, willing to take action. Education/Previous Experience Requirements High School Degree or equivalent strongly preferred Minimum of three years successful employment as an individual contributor with a preference for aerospace manufacturing. Experience in Quality Assurance. Kirkhill, Inc. is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. All successful candidates must submit to post offer pre-employment physical examination, drug/alcohol screen and background check as a condition of employment.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: Perform inspection of materials, processes and final product, per business need. Generates inspection reports according to AS9100 requirements. Enter inspection data into systems. Utilizes inspection tools including calipers, gauges and testing equipment (CMM). Reads and interprets drawings, procedures and work instructions. Identifies areas for improvement in inspection processes and coordinates implementation. Comply with all safety requirements; participate in safety training/practices. Qualifications: 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. Understanding of QA requirements, processes, practices and systems. Demonstrated ability to work in team-based environments. Ability to read engineering drawings to determine and measure features and tolerances. Strong written and verbal communication skills in English. Software experience; Excel, Word, Power Point, etc. Bilingual - English/Spanish Perks and Benefits: Desired first shift schedule Premium Health Insurance - $0 employee premium & $0 deductible Company provided life insurance for all employees with $0 employee contribution Dental 10 paid holidays 5 paid sick days Accrued vacation 401(k) Profit Sharing Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Hydraulics International, Inc (HII) is seeking a Quality Inspector II who performs visual, surface plate layout, verify outside process, in-process, and final inspection of manufactured, purchased and assembled items, units or systems and packaging, packing and marking of units prior to shipment in accordance with drawing, planning, purchase order and or customer requirements. You should be a self-starter with ability to handle increasing responsibility and multiple takes with demonstrated attention to quality, detail, and accuracy. Key Performance Deliverables: Basic knowledge or ability to perform visual, surface plate layout, verify outside processes, in-process and final inspection of manufactured, purchased and assembled items, units or systems and packaging, packing and marking of units prior to shipment in accordance with drawing, planning, purchase order and/or customer requirements. Comprehension and accurate execution of quality assurance methods and procedures. Complete inspection, work order, AS9102 1st Article and test records, reports, logs, rejection reports and inputting quality data into ERP database. Ability to use standard inspection equipment (calipers, micrometers, height gage, thread gages, etc..), experience or efficiency with CMM-coordinate measuring machines is desirable, but not mandatory (target-goal to obtain level III) Ability to read and interpret purchase orders/contracts, drawings, industry standards and specifications, comprehension and compliance to customer specifications and requirements. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, adept with Trigonometry - GD&T. Conduct inspections and tests of raw materials, in-process materials, and finished products to ensure compliance with established quality standards. Document inspection results and maintain accurate records of test data. Communicate inspection results to relevant personnel and departments. Support continuous improvement initiatives by identifying potential process improvements and making recommendations. Participate in training and cross-training programs to develop and maintain knowledge of inspection techniques, quality control processes, and industry regulations. Follow all safety and environmental policies and procedures. Requirements: High school diploma or equivalent. Minimum of 2-3 years of experience in a similar role. Knowledge of quality control techniques and principles. Ability to interpret technical drawings and specifications. Ability to work independently and in a team environment. Strong attention to detail and problem-solving skills. Ability to use measuring instruments and test equipment. Experience providing guidance and training to junior inspectors. Competencies: Customer Focus - Anticipating, meeting and/or exceeding customer needs, wants and expectations. Interpersonal Skills - Effectively communicating, building rapport and relating well to all kinds of people. Planning and Organizing - Establishing courses of action to ensure that work is completed effectively. Problem Solving - Defining, analyzing and diagnosing key components of a problem to formulate a solution Project Management - Identifying and overseeing all resources, tasks, systems and people to obtain results. Salary Expectations: We offer competitive compensation & benefits package: 401(k) Dental insurance Health insurance (Dental, Vision, & Life Insurance) PTO About HII: HII headquartered in Chatsworth, California, U.S.A., is a leading supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors worldwide. Focused on defense and commercial technology, the Company develops manufactures and supports a broad range of systems for over one hundred industries as well as mission critical and military sustainment requirements worldwide. We are extremely proud of the fact that our extensive design capabilities enable us to produce the most sophisticated units known to today's technology. Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet. Our manufacturing facility is equipped with the latest state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, and automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices. HII has combined the greatest talent, skill, and equipment to best service our customers' demands. HII is an Equal Employment Opportunity Employer and strictly prohibits discrimination and harassment against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination and harassment against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability (including physical, emotional, and mental health), or status as a protected veteran. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact (818) ###-####x200 for assistance.

DCX-CHOL Enterprises Inc. is a leading source for high performance interconnect products. We design, engineer, and produce cable assemblies, wiring harnesses, conduit assemblies, custom connectors, wire enclosures and much more! We are privately held American owned Small Business made up of five (5) vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. We are looking for dependable, fast paced, hard-working individuals with experience as a Mechanical Quality Inspector with the following qualifications and experience: Principle Duties and Responsibilities • Use of basic inspection tools, including height stand, calipers, micrometers; comparator; Hexagon vision experience is a plus. • Experience fixturing and laying out part for dimensional readings. • Experience reading and deciphering blueprints, performing FAIR dimensional inspection reports. • Performs 1st article inspection on machined parts. • Performs in-process inspection, final inspection, and tool calibration as required to support the inspection department. • Maintain area neat and clean and adhere to all company safety rules and regulations. • Other duties are necessary to maintain the necessary levels of production. • Can work overtime as needed and weekends when needed. Experience and Education Required • High School or Equivalent • Able to read, write, and comprehend the English language. • Blueprint reading • Basic Math / Geometry skills • Aerospace Experience is a plus. • Basic computer skills, including MS Office • Knowledge of various types of measuring instruments • Familiar with ANSI Y14.5 & ASME Y14.85 • 3-4 years of manufacturing or related experience Must have advanced ability to read drawings, specifications, acceptance test procedures, GD&T dimensioning Physical requirements. Frequent: Handle, manual dexterity, lift 5-49 lbs., reach, stand, stoop, and walk. Use personal protective equipment. Required: Close vision, color, and depth perception. Familiarity with Aerospace plating and processing standards, such as standards for anodizing, chem.-film, passivation, chrome plating, silver plating, etc. Computer literate with experience in Microsoft Word, Excel and Outlook desired. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization via E-Verify.

Duties and Responsibilities include, but not limited to • Inspect and validate hardware to conform to AeroAntenna Technology• s drawing or a given standard such as J-STD-001 or IPC-A-610 / IPC-A-600 / IPC6012 • Review and maintain documentation • Review receiving history • Issue DMR as necessary • Receive into AMS ( Aeroantenna Management System) • Successful candidates will support the assembly of cutting-edge antennas. This challenging role brings relevant, robust products to the market. QUALIFICATIONS AND SKILLS • 3-5 years• experience • AS9100/ISO9000 skill • ESD knowledge/prevention skill • Identify electronic components • Perform First Article • Inspect using hand measuring tools and or CMM/VMM and validate hardware components conform to AeroAntenna /Original Equipment Manufacturer drawings or a given reference standards. • Familiar with referenced standards such as J-STD-001, IPC-A-600, IPC-A-610 or IPC-6012. • Receive into AMS ( Aeroantenna Management System) • Release for next process. • Demonstrated ability to deliver on time and work well as a team member in a team consisting of different design disciplines. • Excellent written and verbal communication skills. BENEFITS: AeroAntenna offers a great benefits package, 401K with company matching up to 3%, Six Sick Days and Six Holidays. What we do : The company ( Now is a part of HEICO Corp .) is a leader in the design and production of high performance active antenna systems for critical defense applications, precision guided munitions, commercial aircraft and other commercial uses. Antenna types it makes include GPS, aircraft navigation and satellite communications antennas. Additional Information: • Job Site: 20732 Lassen Street, Chatsworth, CA 91311 • Mail Resumes To: ATTN: HR, AeroAntenna Technology, Inc., 20732 Lassen Street, Chatsworth, CA 91311 • eMail Resumes To: [email protected]

In billions of syringes and in every second car worldwide, Datwyler components make an important contribution to the safety of patients and drivers. The high-tech company focuses on high-quality, system-critical elastomer components and holds leading positions in attractive global markets such as healthcare, mobility, connectivity, general industry and food & beverage. With over 25 production sites on four continents, sales in more than 100 countries and over 8,000 employees, the company, headquartered in Switzerland, generates annual sales of more than CHF 1,000 million. Our employees are the heart of Datwyler - we treat each other with respect, trust and appreciation. We have strong roots and values that have been well established in our 100-year corporate history. Become part of our great team as a... We are seeking a Quality Control (QC) Inspector with strong attention to detail and a passion for excellence to join our team in Ontario, CA. The QC Inspector plays a key role in ensuring our products meet customer requirements and industry standards through precise inspection and accurate documentation. The ideal candidate will be a collaborative team player with a balance of drive, humility, and people skills, capable of working in a fast-paced environment while maintaining the highest quality standards. Responsibilities Inspect finished parts to determine classification for acceptance, rework, or scrap. Measure product dimensions using inspection instruments such as spline gages, thread gages, ID/OD micrometers, calipers, profilometers, and comparators. Compare inspection results with customer specifications and engineering requirements to verify conformance. Review work orders and sampling plans to determine inspection criteria in accordance with customer and industry standards. Accurately record inspection and test data (e.g., hardness, size, surface finish, run-out, and quantities inspected). Prepare detailed inspection reports, including defect reports for customer disposition. Perform mold inspections, custom final inspections, hand inspections, and Vario operator tasks. Collaborate with quality inspectors/technicians and production staff to resolve quality issues. Maintain organized inspection records and support continuous improvement activities. Serve as backup for mold inspection, quality technician, Vario operator, custom final inspection, and hand inspection. Measure first articles and generate First Article Inspection (FAIR) reports in accordance with customer and industry requirements. Perform tool verifications to ensure ongoing accuracy and compliance. Coordinate and set up 3rd party calibration services, including sending tools out for calibration and tracking their status. Maintain calibration of inspection tools and equipment within the company's calibration program. Perform other quality-related duties as assigned. Qualifications This position requires access to technology controlled under the International Traffic in Arms Regulations (ITAR). Therefore, only U.S. Persons (as defined by ITAR) are eligible for employment. Minimum 2 years of inspection experience (aerospace industry experience preferred). Proficiency with precision measurement tools and inspection equipment. Strong technical aptitude and eagerness to learn. Basic computer skills, including Microsoft Office (Excel, Word, Outlook). Excellent written and verbal communication skills. Proven attention to detail, accuracy, and organizational ability. Flexibility to adapt to changing priorities and job responsibilities. Ability to thrive in a fast-paced, team-oriented environment. Physical Requirements & Safety Ability to stand for extended periods of time. Ability to lift up to 30 lbs as needed. Manual dexterity to handle small parts and precision instruments. Adherence to all company safety policies, including the use of personal protective equipment (PPE) and compliance with Cal/OSHA standards. Our offer to you $20-$23 per hour Combined PTO Matching 5% 401K with Roth option Medical, Dental, Vision and other auxiliary benefit options Company paid Life Insurance and optional Voluntary Life Insurance Development training and opportunities for growth Paid Holidays Equal Employment Opportunity Parco, LLC (a Datwyler Company) is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected characteristic. Be yourself at Datwyler We are convinced that people make the difference. At Datwyler, you will experience diversity and a wide range of career opportunities that only an international company can provide. Together, we are increasing our agility, accelerating digitalization and fostering sustainability. For motivated and talented employees, we offer interesting development opportunities with training and assignments in a global environment. With us, you can contribute with all of your creativity and all your ideas. ****************

A leading quantum technology firm based in San Francisco is seeking a Software Engineer to develop software solutions for quantum technologies. You will integrate systems, implement innovative techniques, and mentor junior developers. The ideal candidate has a degree in a STEM field and at least 4 years of programming experience with Python, Rust, or C++. This competitive role offers substantial salary and benefits along with a high-performance culture focused on flexibility and equity potential. #J-18808-Ljbffr

At BWX Technologies, Inc. (NYSE: BWXT), we are People Strong, Innovation Driven. A U.S.-based company, BWXT is a Fortune 1000 and Defense News Top 100 manufacturing and engineering innovator that provides safe and effective nuclear solutions for global security, clean energy, environmental restoration, nuclear medicine and space exploration. With more than 7,800 employees, BWXT has 14 major operating sites in the U.S., Canada and the U.K. We are the sole manufacturer of naval nuclear reactors for U.S. submarines and aircraft carriers. Our company supplies precision manufactured components, services and fuel for the commercial nuclear power industry across four continents. Our joint ventures provide environmental restoration and operations management at a dozen U.S. Department of Energy and NASA facilities. BWXT's technology is driving advances in medical radioisotope production in North America and microreactors for various defense and space applications. For more information, visit ************ . Follow us on LinkedIn , X , Facebook and Instagram . Welcome to BWXT We believe in empowering our employees and cultivating a dynamic workplace that fosters growth and collaboration. Whether you're an experienced professional or just starting your career, you'll find opportunities to challenge yourself, learn from seasoned experts, and contribute to nuclear innovation. We required a diverse range of skills to support our work in the markets that drive our business and welcome candidates from all backgrounds and life stages who are passionate about making a difference. Cunico, a BWXT company, was founded in 1951 in Long Beach, California and specializes in naval products for submarines, aircraft carriers, naval surface ships and LNG manifold/valve systems. This team manufactures Level 1 cold-formed and specialty fittings, piping systems and valves to Military Spec for the U.S. Navy, Electric Boat, Newport News, BAE Systems, Navantia, Ingalls and other companies in Europe. If you are looking for a career where your experience is valued, innovative thinking is fostered, and barrier-free teamwork is embraced every day, then this opportunity is for you. Position Overview: As our Quality Control Engineer, you will review specifications, create and review quality documentation, validate processes, and collaborate across teams to uphold the highest quality standards. Location: On-site in Long Beach, CA Your Day to Day as a Quality Control Engineer: Review contracts and customer specifications to identify the required material property and NDT tests. Work with outside NDT labs to select the correct procedure and techniques accordingly. Issue purchase orders and follow up status with labs. Review parts measuring results, lab test certificates, material testing reports, and other required quality documents. Prepare final data package. Track and organize/archive quality records, such as calibrations, certifications, deviations/non-conformance reports, approved lab/procedure lists, etc. Follow quality program and procedures. Collaborate with production and engineering. Check products independently. Validate processes. Create/review quality documentations. Conduct internal and external, including customer and ISO, audits under supervision. Required Qualifications: A minimum of a bachelor's degree in engineering or physics is required. Must have knowledge of MIL standard NDT specifications. Must be able to provide clear, concise, accurate, and timely written and verbal communication. Must be able to develop effective relationships with internal and external customers and suppliers. Must be a U.S. Citizen. Preferred Qualifications: NDT level I or II certified in VT, PT, and/or UT is preferred. What We Offer: Competitive salary and benefits package, including health, dental, and retirement plans. Flexible work schedules and paid time off to promote a healthy work-life balance. Professional development opportunities, including mentorship programs and sponsorship for continuing education. An inclusive atmosphere that celebrates new perspectives and supports collaboration between different generations. The chance to be part of a mission-driven organization making a positive impact on the future of energy. Pay: $66,000.00 - $101,000.00 The base salary range for this position in California (US-CA) at the start of employment is expected to be between $66,000.00 and $101,000.00 per year. However, the base salary offered is based on local job market factors, and may vary further depending on factors specific to the selected job candidate, such as job-related knowledge, skills, experience, and other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of participation in these benefit plans will be provided at such time the selected job candidate receives an offer of employment. If hired, the selected job candidate will be employed 'at-will,' unless employed at a location and in a position subject to a collective bargaining agreement. The company further reserves the right to modify base salary (as well as any other discretionary payment, compensation or benefit program) at any time, including for reasons related to individual performance, company or individual department/team performance, and other market factors. As a federal government contractor, BWX Technologies, Inc. and any subsidiaries, affiliates and related entities ("BWXT" or the "Company") complies with all federal, state, and local laws and customer requirements regarding health and safety protocols. As such, all BWXT new hires will be required to adhere to applicable Company health and safety requirements within the workplace as a condition of employment. BWXT is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, sex, national origin, citizenship, age, disability, protected veteran or other protected status. BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid ("Agreement"). BWXT may consider any candidate for whom a recruiter or agency has submitted an unsolicited resume and explicitly reserves the right to hire such candidate(s) without any financial obligation to the recruiter or agency unless an Agreement is in place prior to presentation and such Agreement explicitly encompasses the job opening for which such fees or costs are sought. An email, verbal or other informal contact with any person within BWXT will not create a binding agreement. Agencies or recruiters without an Agreement are directed not to contact any hiring managers of BWXT with recruiting inquiries or resumes. Recruiters and agencies interested in partnering with BWXT may contact BWXT's Talent Acquisition team at [email protected]. Nearest Major Market: Los Angeles Job Segment: Nuclear Engineering, Nuclear Physics, QC, Quality Engineer, Controls Engineer, Engineering, Science, Quality