Quality control technician jobs in Pittsburgh, PA - 176 jobs

Job Purpose: Performs clinical laboratory tests, procedures and analysis to provide data for diagnosis, treatment and prevention of disease. Duties and Responsibilities: Prepares specimens for analysis and organizes tests to be performed. Prepares and properly labels reagents required for laboratory testing Conducts analysis of dried blood spots or body fluid to determine presence of normal and abnormal components. Reviews test results, maintains legible work records, and enters findings into the laboratory information systems. Performs routine preventative maintenance on instruments and equipment's according to established schedule and procedure Verifies proper instrument function by checking and calibrating lab instruments and documents data. Records on instrument log any repairs, replacement and maintenance performed on laboratory instruments. Abides by laboratory safety policies and procedures. The list of duties and responsibilities is not exhaustive and may be substituted as necessary Working Conditions: describe office, loading dock, lab environment, include shifts and any travel: Clinical and research lab environment; exposure to blood borne pathogens; must wear protective lab gear including lab coat, gloves and completely closed footwear. Employee may be requested to work shifts other than daylight depending on the needs of the laboratory. Weekend rotation may be required. Travel is not required. Physical Requirements: While performing the duties of this job, the employee is regularly required to sit, use a keyboard, type, and occasionally stand and move to other parts of the lab. Must have manual dexterity to use lab equipment. Must be able to lift up to 25 pounds. Qualifications: Bachelor's Degree in a physical science such as chemistry, biology, molecular biology or medical technology. 0-1 year clinical laboratory experience Mass Spec and/or Immunology experience preferred.

Basic Qualifications High School diploma or the equivalent is required. Associate's degree in Electronics, Computer Science, Mechanical engineering is preferred. In addition, a minimum of 4 years directly related experience is required. J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation's heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what's possible. Here you'll work with the best and your talent will be front and center on projects that impact the world. Are you up to the challenge? We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar and everything in between. Utilizing your strong knowledge of electrical theory, the Advanced Quality Inspector will inspect parts, materials, assemblies and equipment for compliance to specified requirements and perform real-time defect evaluation. This will require the preparation of QA documentation along with the verification of corrective action implementation and rework. We will rely on your strong communication skills to interface with coworkers, internal customers and potentially suppliers. What you'll experience: Technologies that aren't just top-notch, they're often top-secret A team of bold thinkers committed to exploring what's next Opportunities to gain new knowledge - as it's discovered What you bring to the table: A High School diploma or the equivalent required; Associate's degree in Electronics, Computer Science, Mechanical engineering preferred Minimum of 4 years directly related experience Conduct visual inspection, electrical or mechanical screening, and physical measurements of mechanical, electro-mechanical, and electronic parts and materials. Programming and operation of coordinate measuring machines. Assist and perform first article and first piece inspections, including complex inspections. Work with project engineering and Quality Engineering to develop part testing and screening requirements. J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required Solid knowledge of ESD control, workmanship standards, geometric dimensioning and tolerancing, and statistics and process control techniques Skilled in the set-up of basic electronic test configurations or mechanical test configurations What sets you apart: Team player who thrives in collaborative environments and revels in team success Exceptional problem-solving and communication skills Open to new ideas and serve as a champion for change when directed from management Commitment to ongoing professional development Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully onsite in Canonsburg, PA. Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $30.36 - USD $32.56 /Hr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Primary Duties & Responsibilities Accountable for interpreting specifications on drawings to ensure parts meet specification, following the non-conforming parts and rejection processes through MRB. Responsible for analyzing measurement data and troubleshooting discrepancies to ensure product quality and reliability. Responsible for creating, maintaining and updating all electronic data sheets and database templates in accordance with company policies and regulatory requirements. Actively contribute to the development and implementation of new measurement processes and procedures. Effectively collaborate with quality, engineering and production teams to resolve quality-related issues and improve measurement techniques. Responsible for supporting the training activities of junior technicians on measurement practices and equipment usage. Actively contribute to internal and external audits to support compliance efforts. Education & Experience High school graduate or equivalent required. Associate or technical degree in engineering, metrology, or a related field required. Metrology related certifications preferred. (e.g., ISO, ASQ) At least two (2) years of experience in metrology or quality assurance. At least two (2) years of work experience in QAM or a related optical/mechanical test environment with a heavy emphasis on mechanical testing, precision measurement, calibration, and data analysis Skills Must be proficient in the use of measurement tools (e.g., calipers, micrometers, CMMs) and metrology software. Must have strong math, problem-solving, and analytical skills along with great attention to detail. Must have excellent communication and interpersonal skills, with the ability to work collaboratively in a team environment. Must have familiarity with quality management systems and standards (e.g., ISO 9001). Must have a solid understanding of metrology principles and quality assurance processes. Must have good manual dexterity and ability to work with small, delicate components. Must have strong Microsoft Office Suite (Word, Excel, PowerPoint) skills. Must have a strong technical background to understand technical concepts and drawings. Must be able to read and interpret customer supplied optical drawings in accordance with military specifications and ANSI standards. Ability to model and apply I CARE values (Integrity, Collaboration, Accountability, Respect, Enthusiasm). Due to ITAR compliance, this position requires a U.S. citizen, permanent resident alien, or protected individual per 8 U.S.C. 1324b(a)(3). Working Conditions Cleanroom environment with inspection stations. Constant mental and visual alertness needed. Regular exposure to chemicals and solvents. Exposure to high intensity light while inspecting certain product lines. Physical Requirements Ability to see clearly at a distance, especially when observing larger equipment or layout plans. Must have capability to judge distances accurately, which is crucial for measuring and calibrating equipment. Must have the ability to perceive objects outside of direct line of sight. (peripheral vision) Must be able to sit or stand for extended periods of time. Must be able to lift, push, and/or pull up to 50lbs. The use of both hands while transporting materials is required. Ability to use computer equipment is required. Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .Coherent is a global leader in lasers, engineered materials and networking components. We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program. It's an exciting opportunity to work for a company that offers stability, longevity and growth. Come Join Us! Note to recruiters and employment agencies: We will not pay for unsolicited resumes from recruiters and employment agencies unless we have a signed agreement and have required assistance, in writing, for a specific opening.Job Summary: The QA Metrology Technician is responsible for performing calibrations and measurements of complex instruments and equipment to ensure accuracy and compliance with industry and customer standards. Due to ITAR compliance, this position requires a U.S. citizen, permanent resident alien, or protected individual per 8 U.S.C. 1324b(a)(3).

Ecolab, the global leader in premium water cleaning, sanitizing and maintenance products and services for the hospitality, institutional and industrial markets is seeking a Quality Control Technician for our Green Tree, PA location. This role is responsible for performing a variety of inspection and tests on purchased, made in-house, sub-assembly and final products integral to Nalco's water monitoring and treatment equipment. The role will also assist as directed with nonconformance, calibration, documentation management, and other elements of the ISO9001 certified Quality Management System. What's in it For You: The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best Comprehensive benefits package starting day one of employment including medical, dental, vision, matching 401k, company paid pension, stock purchase plan, tuition reimbursement and more! Click Here to see our benefits. What You Will Do: Perform hydrostatic, mechanical and electrical tests and inspections on components and equipment based on standard procedures, and document test results Troubleshoot, and potentially fix, issues that arise Upload, configure, debug, and troubleshoot programmable logic controller (PLC) programs and related control logic on equipment Use and install meters, power supplies, hoses, and other testing equipment Critically evaluate quality standards and collaborate on continual improvement Support management of nonconformance, calibration, and documentation programs Interface with equipment engineers and fabricators to ensure electrical, mechanical, and control system tests are sufficient Read and interpret mechanical and electrical drawings Ensure schedule, quality, and safety standards are met Operate a forklift and pallet jack Other duties as assigned Position Details: Plant location: Pittsburgh, PA Work week and shift: Monday - Friday 7AM - 3:30PM, with possible overtime requirements Compensation Package Offered: $30.00 / hour, depending on experience Minimum Qualifications: High School diploma or equivalent 3 years of experience in an equipment assembly or electrical-related assignment 3 years of experience working on industrial equipment utilizing computerized (PLC) control systems to perform process operations Experience reading and interpreting mechanical and electrical drawings Experience wiring simple circuitry and performing point-to-point terminations Experience using hand and power tools and basic size and weight measuring devices Experience using handheld electrical process calibration tools, such as multi-meter, signal generator, and amprobe Experience with low voltage AC ( No Immigration Sponsorship available for this opportunity Physical Demands: This position requires regularly lifting and carrying 50lbs. This role is in a shop environment, with exposure to dust, noises, and odors. Preferred Qualifications: Knowledge of electrical safety, electrical code requirements, and common types of control equipment Experience in a quality control related assignment NFPA 70E certification within the last five years Skilled trade degree or certification (Industrial Electrician training) Experience operating water pretreatment equipment Basic computer skills (examples: data entry, Internet/e-mail, etc.) Good communication skills Ability to work independently Annual or Hourly Compensation Range The pay range for this position is $55,000.00 - $82,500.00. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

**Now hiring! QC Lab Technician - Monaca, PA** **Pay Range: $25.00-26.00/ hr. / Night Shift differential / Performance Incentive Bonus/ Full Benefits Package / 401k Options** We are looking for a **Quality Control Lab Technician** to join our **Dispersions team** in **Monaca, PA.** **Come create chemistry with us!** **During your rotating 12-hour shift as a QC Lab Technician, you will** **Principal Responsibilities** + Actively supporting and promoting a safe working environment, participating in all safety trainings and programs, and supporting Environmental, Health, Safety, and Security plant initiatives. + Using a variety of testing equipment including GCs, HPLC, FTIR, Spectrophotometers, Viscometers, Ovens, balances, pH meters, Microscopy, LIMS & SAP data systems. + Using appropriate software to evaluate data based on internal and external specifications, procedure requirements, and LIMS programming, as well as entering information into SAP software. + Quality assurance testing of in-process and finished latex products within the scope of the BASF Quality Policy and ISO 9001 Quality Management System which includes testing using pH, viscosity, gas chromatography, and other analytical techniques. Other testing as required including waste water samples. + Performing bacteria testing + Supporting the continuous improvement of lab and plant processes through QA/QC activities, instrument troubleshooting and maintenance, and meeting/exceeding customer expectations. + Interacting with the Supply Chain and Operations departments at the Monaca site to expedite shipments to customers utilizing SAP + **Available to work rotating 12 hour shifts 7:30am-7:30pm and vice versa and overtime when needed** **Process Safety Management Responsibilities** + Process safety roles and responsibilities across the organization are clearly defined and include an expectation to raise, and authority to respond to process safety concerns. Employees understand the importance of process safety as it applies to their jobs and are responsible for following and contributing to the work processes to achieve improvement in company process safety performance. **Formula for Success ...** + 2 yr Associates degree or technical degree in Chemistry/Analytical testing OR related field with lab experience **OR** High School Diploma/GED with minimum 2+ years of relevant industrial lab experience required. + Experience working in a manufacturing environment on a 12 hour rotating shift + Experience with Microsoft Office products; Word, PowerPoint, Excel and ability to operate various computer-controlled instruments. + Knowledge of testing equipment found in laboratory setting; GCs, HPLC, FTIRS, Viscometers + Basic understanding of general chemistry, techniques of quality assuarance and quality control + Basic understanding of math, statistics, analytical methodology, insight into problem solving, and ability to record and report pertinent data. + On occasion, must be able to lift up to a maximum of 30 lbs. + Must be able to follow both written procedures, verbal instructions and follow all applicable safety procedures including correct personal protective equipment. + Willing and available to work **rotating 12 hour shifts (7:30am-7:30pm and vice versa)** and overtime when required **Preferred Skills** + Experience working in an ISO or GMP compliance driven lab environment + Experience with emulsion polymerization products, laboratory testing and practices + The preferred candidate will have minimum 2+ years' experience in a lab position of increasing responsibility. \#dispersionsresins&additives **Create your own chemistry with you@BASF** At BASF, you will have the chance to do meaningful work towards building a more sustainable future. In addition to competitive compensation and benefits, BASF provides you with access to a wide range of elements to help you be your best. It's what we call **you@BASF** . We are committed to providing benefits, programs, and opportunities that support our employees' overall well-being, personal growth, and a safe, collaborative, and inclusive work environment. Just some of the many benefits we offer include: + Flexible work arrangements whenever possible + Highly competitive retirement savings plan with company match and investment options + Well-being programs that include comprehensive mental health support for you and your household family members + Family forming benefits (fertility, adoption and surrogacy reimbursement, maternity/parental leave, and more) + Back-up child and elder care with discount programs for families of all ages and stages + Mentoring and career development opportunities that allow you to share, learn, and thrive + Matching gifts program that allows you to deepen the impact of your contributions to qualified charities. + Employee crisis support for when the unexpected happens + Access to our BASF wine cellar, employee discounts, and much more! **About us** As one of the largest chemical companies in North America we have been finding solutions for your everyday needs and addressing the most complex economic, environmental, and sustainability challenges for more than 150 years! At BASF we empower our employees with the tools, guidance and opportunities they need to advance and succeed in work and life. Giving you the support you need to be your best and fulfill your personal ambitions is what helps us create chemistry. After all, our success is linked to yours. Whatever path you envision, BASF is a great place to build a rewarding, successful career. Belong to Something Bigger. #belongat BASF **Privacy statement** BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ***************************** to report fraud. **Equal employment opportunities** We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

Line of Business: RMC About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform routine testing of concrete and raw materials to ensure compliance with specifications Document and report test results accurately and promptly Assist in troubleshooting material quality issues and recommend corrective actions Maintain testing equipment and ensure calibration standards are met Collaborate with plant and field personnel to support quality initiatives Support general labor tasks around the plant as needed, including assisting with physical duties What Are We Looking For Understanding of concrete materials and testing procedures Ability to follow standardized testing protocols and safety guidelines Strong attention to detail and documentation accuracy Effective communication and teamwork skills Willingness to work in field and plant environments with varying conditions Strong math skills, particularly in algebra, to support accurate testing, mix adjustments, and data analysis Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level What We Offer Competitive base salary $50,320 - $59,130 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Essential Job Functions/Responsibilities: Manufacturing firm is searching for a qualified candidate to perform NDE on ASME Section III, Section VIII Vessels and nuclear power plant components. Experience in working with the following codes/standards: ASME, AWS, ISO and other standards are desired. Job requires potential overnight travel and will require off shift work. Adherence to safety procedures/guidelines at all times. Maintain safety precautions at all times. Keep work area in a clean and orderly condition. Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results. Perform NDE Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication. Familiar with the tools and equipment and shall have demonstrated proficiency in their use. Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved. Capable of assisting production in the set-up of material and/or components for receipt inspection, as required. Train other individuals as required by management. Physical Demands & Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas. This role can be physically demanding and may require the ability to lift up to fifty (50) pounds. Supports: Quality Control Manager, Shop Managers, Quality Control Supervisor, Production Supervisors, Product Line Managers Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years of college in technical or engineering related discipline from a university, college, or technical school. Preferred: 1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in two or more of the following NDT Methods that will be utilized: Visual Examination (VT) Liquid Penetrant (PT) Magnetic Particle (MT) Radiographic (RT) Ultrasonic Testing (UT) Preferred candidate will be a Certified Level II Visual Examination (VT), Liquid Penetrant (PT) and Magnetic Particle (MT) Required Licenses or Certifications: Valid Driver's License Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience.

Job Title: Quality Control Technician Manufacturing Schedule: Monday to Friday Split between 2 local Pittsburgh locations (2 days at one site, 3 days at the other) Salary: $50,000$60,000 annually About Us: Join a growing manufacturing team in the Pittsburgh area dedicated to precision, quality, and collaboration. We specialize in steel and glass production and are looking for a detail-oriented Quality Control Technician to ensure our products meet the highest standards across two sites. Why This Role: Work in a dual-site environment for variety and hands-on experience. Collaborate with a team committed to continuous improvement and professional growth. Opportunity to develop and advance your career in manufacturing quality control. Key Responsibilities: Conduct quality inspections on steel and glass production. Use manual micrometers and calipers to take precise measurements. Read and interpret blueprints accurately. Train and support production staff on quality standards. Assist the Quality Manager with documentation and quality management systems (QMS). Collaborate across both facilities to ensure consistent quality practices. Participate in process improvement initiatives and trials. Qualifications: Minimum 2 years of manufacturing experience in steel or glass industries Proficient with manual micrometers and calipers. Ability to read and interpret blueprints. Basic Excel proficiency. Experience with quality management systems (QMS) required. Associates degree or equivalent experience. Benefits: Health care coverage (PPO/EPO) eligible first month; company covers 75% Dental and vision coverage 401(k) with company match (50% of first 6% contribution) eligible after 6 months PTO: 15 days + 5 sick days, prorated and increasing with tenure 10 company holidays annually How to Apply: If you are detail-oriented, hands-on, and passionate about quality in manufacturing, we want to hear from you! Apply now to join our Pittsburgh-area team.

Overview Location: Onsite, Pittsburgh PA Job Type: Full Time Work Authorization: US Citizen / GC The A.C. Coy Company has an immediate opening for a Quality Control Inspector. This individual will be responsible for detecting nonconformities, preventing defects, and maintaining accurate quality records.Ideal candidates must have at least 2 years of Quality Control experience with strong computer skills, excellent attention to detail, and basic understanding of electronics. Responsibilities Manage daily inspection priorities in coordination with Warehouse and Production managers Communicate internally quality issues identified during inspection or identified during production process / material handling Conduct outgoing inspection to validate material moved through the production process meets quality standards Accurately input data into appropriate data storage locations for all inspected material Validate incoming and outgoing inspection documentation is available, organized, and complete Prepare reports for inspection failures, and provide In-process inspections as needed Provide training and support for the Production team for quality-related process steps and other topics as needed Qualifications 2+ years' experience with incoming and outgoing Quality Control inspection Demonstrated level of technical capability and responsibility Very good written and verbal communication skills are required. Proficiency in Microsoft Office is required, particularly Word and Excel Demonstrated capability as a self-starter in a hands-on environment is required

Position Type: Full Time (40+) Pay Type: Hourly Seasonal Work: Yes Northeast Paving Benefits: * Company Paid Basic Life Insurance * Company Paid Long Term Disability Policy * Company Paid Vacation & Holiday Pay * Company Paid Parental Leave * Company Paid Maternity Leave * Company Paid Employee/Family Assistance Program (EAP) * Voluntary Medical & Vision Insurance * Voluntary Dental Insurance * Voluntary Short Term Disability * Voluntary Supplemental Term Life * Voluntary Accident, Legal, Hospital, Critical Illness Policies * 401(k) Plan w/Employer Match * Annual Company Stock Purchase Opportunities * Discount Partnerships: Verizon, Ford, Perkspot * Health and Wellness Benefits, including Monthly Gym/Fitness Incentives General Description A Quality Control Technician is an hourly-rated skilled craft position that performs on construction projects any combination of the duties described more fully, below. A Quality Control Technician typically performs a wide variety of tasks, transferring from one task to another as the work flow dictates. Key Duties * This position is responsible for controlling the quality of the production of hot mix asphalt through inspection of the plant, production materials, and jobsite review as well as conducting routine and special laboratory testing to ensure conformance standards * Proficiently and accurately sample and conduct visual inspection and laboratory testing of construction materials according to the appropriate standard test methods to insure quality control of products at the point of production, shipping and arrival on the jobsite * Test methods include but not limited to DOT regulations. * Communicate and document test results to plant operator, supervisor and operations * Review mix designs and product to job specifications of upcoming projects * Perform jobsite inspection, customer service and troubleshooting as needed * Prepare various QC reports and formulating specific recommendations to resolve or correct quality issues * Visually inspecting stockpiles, materials sources, plant and truck loads at plant sites * Conduct testing and assisting in plant inspection and calibration to insure the proper quality of the product * Verify outside construction materials testing laboratory results and maintain accurate, timely records of test data, product quality, and defective materials * Prepare statistical summary quality reports on company product lines * Serve as a technical resource to operations, sales and customers * Keep informed of professional and technical developments of new specifications to maintain and improve operational efficiencies by attending relevant technical meetings * Possess and demonstrate a strong working knowledge of asphalt and plant operations * Perform various tests in an orderly, efficient, and accurate manner * Complete understanding of mix design characteristics for asphalt products and various product specifications * Strong math and average computer skills are required * Must possess strong written and verbal communication skills and have the ability to interact with individuals at any level of the organization (i.e. plant production personnel, plant managers, contractors, and agency representatives) * Ability to problem-solve and work independently * Prepare various QC reports and formulate specific recommendations to resolve or correct quality issues; and work with outside venders, agencies, and customers on a variety of quality related issues * Perform incidental work items and duties included within other crafts Qualification Requirements General To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience This position typically is not an entry-level job, as it requires demonstrable previous experience as a Quality Control Technician. A high school diploma or general education degree (GED) is preferred. * One (1) or two (2) years of college or equivalent (e.g. trade school, specialized training). * Must be able to understand work directions and communicate effectively with job site supervisors and fellow employees. * Must have 3-5 years field and plant experience in testing and controlling the quality of asphalt pavement materials and construction aggregates. * A valid driver's license is required. Physical Demands The following physical demands are representative of those that must be met by a Quality Control Technician to successfully perform the essential functions of this job. * Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Key Duties. * Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools. * Ability to lift and carry, on a frequent basis, at least 50-90 pounds personally, and up to 150 pounds with assistance. * Maintain constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment. * Frequently walk on uneven surfaces, including natural ground in varying weather conditions. Work Environment * The work environment characteristics described below are representative of those that a Quality Control Technician encounters while performing the essential functions of this job. * Work is performed outdoors in all weather conditions. * Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project. * Employee regularly works near heavy equipment and moving machinery. * Work may involve a variety of substances commonly found on construction sites such as form oil, grease, curing compounds, gasoline, diesel fuel and ready mixed concrete. Demonstrates Safety 1st It is important for members of our team to be actively involved in their own safety, while being considerate of fellow employees. * Assess work environment for possible hazards and makes sure training is adequate to the task. * Has proper personal protective equipment and tools, uses them appropriately for the given task. * Speaks up if seeing an unsafe act * Identifies and turns in near miss reports * Asks for help, when needed, to perform tasks safely. * Considers if there is a safer way to perform work and communicates. Northeast Paving is a full-service paving and construction company operating throughout the northeastern United States. Our teams are capable of handling projects of almost any size and scope, from resurfacing a commercial parking area to constructing high-traffic interstates. The work we do includes roadway construction, railway and bridge construction, paving and resurfacing, utility and drainage installation, and more. Our teams successfully deliver hundreds of projects every year-safely, successfully, and to the exact specifications of our clients. We support a Drug-Free Workplace. EOE AA M/F/Vet/Disability are encouraged to apply. Blythe Construction, Inc. - Hubbard Construction Company - Northeast Paving - Sunmount Paving - Virginia Paving Company, are hereby referred to as Vinci Construction USAAccessibility: If you need an accommodation as part of the employment process please contact Human Resources at Blythe Construction, Inc.: Phone: ************Hubbard Construction Company: Phone: ************Eurovia Atlantic Coast, LLC:Phone: ************ Vinci Construction USA is an Equal Opportunity Employer.Vinci Construction USA is committed to providing a fair and equal employment opportunity workplace. All hiring and promotional decisions are made without regard to race, color, religion, sex (including pregnancy), genetic information, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other status that is protected by federal, state, or local law. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language:

Job Description Kurt J. Lesker Company is seeking a skilled Quality Control Technician to perform inspections and leak checks on our products in accordance with our quality standards. Key Responsibilities: Conduct visual, dimensional, and leak inspections using CMM and other equipment. Verify compliance with engineering drawings and specifications. Complete inspection documentation and maintain logs. Provide guidance to junior inspectors and assist in task assignments. Collaborate with Engineering and Project Management on inspection priorities. Ensure adherence to safety and company policies. Perform other duties as assigned. Qualifications: Required 8-10 years of experience in mechanical inspection, manufacturing, or quality control. Proficient in CMM operations and programming. Skilled in vacuum leak detection, SPC inspections, GD&T, and various inspection stages. Demonstrated leadership or supervisory experience. Strong computer skills and familiarity with quality management systems. Effective verbal and written communication skills. Preferred: Expert-level CMM knowledge. Proficiency in Microsoft Office. Benefits we offer to enhance your lifestyle: On-site gym and Running/Walking Trail Health & Wellness Programs including mental, physical, and financial (on-site yoga, meditation, seminars, flu shots, biometrics screening, annual 5K, waste pick up events, etc.) Comprehensive benefits, including medical, dental, vision, life, and disability insurances Recycling program and electric vehicle plug in station Paid time off 401(k) with employer match Office-wide events Employee recognition programs Kurt J Lesker Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. KJLC is committed to providing reasonable accommodations for persons with disabilities (unless doing so will result in undue hardship). If you need a reasonable accommodation for any part of the employment process, please send an e-mail to our human resources department at ************* or call ************** to provide the nature of your request. Powered by JazzHR UHR2gKL7EF

Job DescriptionChamptires.com is the largest retailer of used tires in the United States, and we're growing. We are currently seeking reliable, hardworking individuals to join our team as Quality Control Technician at our West Mifflin facility. Position Overview The Quality Control Technician is responsible for evaluating incoming tires from suppliers to ensure they meet Champtires' quality standards. This includes: • Performing visual inspections of all tires • Filling tires with air and checking for leaks or defects • Maintaining a clean and organized work station • Meeting a daily production goal • Opportunities to earn incentive pay based on performance Requirements • Ability to lift up to 50 lbs • Strong attention to detail • Ability to work in a fast‑paced, production‑based environment • Experience preferred but not required • Reliable attendance and a positive attitude Schedule & Benefits • 30‑minute lunch break • Two 15‑minute breaks • Overtime available • Onsite training provided Powered by JazzHR GPNYa404Po

Overview & Responsibilities The Quality Technician III is responsible for providing administrative and technical assistance to the Quality Assurance and Inspection Departments. This role requires a certified NDE Level III Inspector who will assist the NDE Level III Inspection Supervisor and other management in various tasks. This person will also manage the quality aspects of low-complexity projects and support Quality Engineers and Quality Managers by using various data and information systems to manage manufacturing records and support project execution. Specific Job Responsibilities and Competencies Manages the preparation and compilation of Quality Assurance Manufacturing Data Records (QA MDR) for submittal to customers, utilizing internal databases (Oracle, Windchill, Lotus Notes…) to ensure accurate and timely data management. Assist the project team obtaining necessary inspection records as requested by customers in advance of QA MDR creation. Support review of the inspection records and the QA MDR with any customer representative or 3rd party inspector. Initiates nonconformances on documentation and inspection issues identified during review of inspection and test records. Manage the preparation, communication and tracking of Notification of Inspections (NOI) for customer witness and observe surveillance points as identified in the Inspection and Test Plan (ITP). Function as a certified NDE Level III Inspector by independently performing and documenting NDE procedures. Work closely with the NDE Level III Inspection Supervisor, assisting with program development and providing hands-on support to ensure all operational and compliance requirements are consistently met. Collaborate with teams to maintain and enhance established systems, processes and forms for collecting and managing inspection and test data. Support revision of related work instructions, component plans and process specifications. This includes supporting the NDE Level III Inspection Supervisor with revisions to process specifications that detail specific inspection methods. Manage the quality aspects of low-complexity projects and develop the Inspection and Test Plans (ITPs). Provides direct support to the Quality Engineering team, assisting with project execution and ensuring all quality standards are met throughout the project lifecycle. Support projects to improve the management of inspection records, QA MDRs, NOIs, and NDE processes. Coordinate with internal organizations to execute daily job functions. Perform data sorting, investigation and analysis to support quality related investigations as necessary. As an internal audit team member assist with internal quality audits. Frequent coordination with customers and suppliers for review and interpretation of quality requirements and inspection points. Clearly and concisely summarizes process and product testing information. Lead and participate in Root Cause Analysis (RCA) and 8D problem-solving processes to identify, correct, and prevent recurrence of quality issues Works to obtain and maintain American Society for Quality membership and certification as a Quality Technician. Background and Experience A minimum of five (5) years of experience in Quality with an Associate's degree, preferably in a Quality, Technical, or related field. In the absence of an Associate's degree, a minimum of nine (9) years of direct experience in Quality is required. Must be familiar with materials and processes associated with manufacturing (including welding, NDE, metrology, quality assurance, quality control activities, quality auditing (e.g., ASME, API, ASNT, ISO9001), and 5S/lean manufacturing concepts. Must hold an NDE Level III certification across various disciplines. Advance knowledge of product specifications and features Advance knowledge of manufacturing processes, inspection methods and procedures, inspection equipment, nondestructive testing techniques and quality engineering including analytical skills. Proficiency with standard operational processes within Quality. Strong verbal and written communication skills, capable of influencing key stakeholders and collaborating across teams. Proficient with personal computers, including use of applications such as Microsoft Word, Excel, Access, PowerPoint and Adobe. Equal Employment Opportunity Ebara Elliott Energy is an equal employment opportunity/affirmative action employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, genetic information, disability, veteran status, or any other characteristic protected by the federal, state or local laws of the United States. Applicants and employees are protected under U.S. federal law from discrimination. To learn more, click here . To learn more about our Job Applicant Privacy Notice, please click here . No agency submissions please. NOTE: Resumes submitted to any Ebara Elliott Energy employee without a current, signed and valid contract in place with the Ebara Elliott Energy recruiting team will become the property of Ebara Elliott Energy and no search fees will be paid.

About Us Are you looking to get your foot in the door in a hands-on, fulfilling industry? Brayman Precast is growing, and we're excited to offer a rare opportunity for someone eager, motivated, and ready to learn. We value attitude, work ethic, and attention to detail far more than industry experience. If you're looking for a place to grow your skills and build a career, we want to hear from you. What You'll Do As an Entry-Level Quality Control Technician, you'll support our experienced technicians by taking on tasks that help keep projects running smoothly. You won't be expected to arrive with advanced skills - just reliability, enthusiasm, and the willingness to learn. Over time, you'll gain hands-on training and industry knowledge that can set you up for long-term success. Key Responsibilities Assist technicians with day-to-day tasks and project preparation Learn and follow basic measurement and installation procedures Use a tape measure accurately and confidently Maintain a clean and organized workspace Support the team by handling tasks that help reduce workload on senior technicians Follow safety and quality guidelines with strong attention to detail What We're Looking For A positive attitude and eagerness to learn - no previous industry experience needed Ability to read and use a tape measure Strong attention to detail and pride in doing quality work Willingness to take direction and ask questions when needed Dependability and good communication skills What We Offer On-the-job training and industry education opportunities Supportive, team-oriented environment Opportunities to grow into more advanced roles A chance to build a meaningful career, not just another job Safety Sensitive Position: This is a Safety Sensitive Position requiring work in a heavy manufacturing facility with various safety hazards which are potentially life-threatening to the employee and Team Members without proper safety precautions. This position may require working at heights, in confined spaces, around heavy equipment, and under constantly changing circumstances. This position may also entail project site work at night and on weekends on an as needed basis. Team Members will be subject to more stringent drug testing and compliance policies due to these safety risks. Special Note: This is presented as guidance only. Other reasonable tasks or responsibilities as management sees necessary may be added to this in order to achieve satisfactory job performance by the team member. EEO Statement: Brayman and Affiliate Companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, veteran status, or on any other characteristic protected by law. Confidentiality: Some positions with the company will have access to confidential and proprietary information. Successful candidates for those positions will be required to sign our standard confidentiality agreement as a condition of employment. Full : For a complete job description and list of responsibilities, please visit our career page at ********************************************* Location: 16056

The Quality Control Inspector at Cook Vandergrift performs incoming, in process, final inspection of product, labeling and packaging, according to established procedures to ensure all products meet the appropriate specifications. Responsibilities * Read and understand specifications for product being inspected• Perform visual, dimensional and functional inspections on components, sub-assemblies or finished devices to assure compliance with the written specifications and/or drawings• Identify, document and control non-conforming components, sub-assemblies or finished devices according to established procedures• Accurate completion of necessary documentation• Follow all quality system documents• Report to work punctually and as scheduled• Perform fine manipulative processes, using a microscope/micro forge, video screen, and/or other equipment, seated and/or standing at a workstation• Perform work in a Controlled Environment with special gowning/clothing and hygiene requirements• Perform various computer functions• Provide training of QC personnel• Assist in introducing new or improved products into production * Perform routine maintenance on certain machinery/tools in department• Assure measuring equipment used to perform any inspection(s) is calibrated• Provide input to supervisor/manager to improve department operation and efficiency Qualifications * Must have a high school diploma or GED• Must pass a post-offer physical exam and drug screening• Ability to read, write and understand product documentation and specification drawings• Have the written skills to accurately complete paperwork• Ability to use measuring devices and gauges * Perform basic math skills and applications including addition, subtraction, multiplication and division including the ability to understand decimals• Basic computer entry/retrieval skills Physical Requirements: * Good visual acuity• Good manual dexterity• Ability to occasionally lift a maximum of 30 pounds• Majority of day spent in Controlled Environment with special gowning/clothing and hygiene requirements * Required use of safety glasses• Limited exposure to hazardous chemicals used in manufacturing of products

Quality Control Inspector / Tank REPORTS TO: Quality Control Manager LOCATION: Canonsburg, PA DEPARTMENT: Quality Control JOB LEVEL: STATUS: Non-Exempt ______________________________________________________________________________ POSITION DESCRIPTION SUMMARY The Quality Control Inspector is responsible to inspect products both visually and with measurement tools, for performing inspections and audits while maintaining records that ensure the consistency of acceptable workmanship and quality as established by AWS D1.1, D1.2 or D1.6 weld codes or company operational policies and procedures, you are an invaluable member of our manufacturing team, ensuring the highest quality of production from the shop floor to the final inspection. ESSENTIAL FUNCTIONS Issue monthly quality report with details of metrics on non-conformities and corrective actions initiated. Responsible for inspecting and assessing the quality and strength of welding work and ready to function as part of the structural integrity. Inspect the equipment and ensure welders follow the company's and state safety regulations as well as the Work Instructions. Ensure that the services provided are performed in accordance with the project requirements. The inspector is responsible for oversight of the fabrication quality assurance on behalf of PTTI, in addition to on-site inspections during the fabrication phase. Communicating with the Manager to determine the specific requirements of a given work order, including the scope of work, deliverables, and schedule, for a particular assignment. Assure that all requirements per the ISO standard are adhered to. Document Non-Conformances (NC) via a NC Email. Ensure that all NCs are properly CLOSED out. Stop Work Tags (SWT) to document Non-Conformances. Contribute to the efforts needed to successfully pass external and internal audits. Team player willing to work with welders, supervision, and other PTTI employees. Become knowledgeable on the PTTI internal quality documentation. Interactions are required with organizations both upstream and downstream of the winding effort. Serve as a Liaison between the welding floor and engineering. Ensure that welding sheet changes are implemented in a formal revision. Perform final product inspection in totality to meet customer's requirements. Perform daily inspection of items in department. All other duties as assigned. KNOWLEDGE, SKILLS & ABILITIES Knowledgeable on the ISO 9000 Quality System Ability to efficiently navigate weld codes to meet requirements Ability to read blueprints and use precise measurement tools. Good computer skills, i.e., Microsoft Office, programming Familiarity with statistical analysis In-depth understanding of technical documentation Great attention to detail and problem-solving abilities Ability to work independently or on a team. EDUCATION AND EXPERIENCE The inspector must have significant knowledge of the American welding Society (AWS) codes and demonstrable experience in a similar position. Valid AWS CWI Certification Proficient in weld testing according to applicable weld code requirements, including but not limited to GMAW, FCAW, SAW, or TIG processes. General Knowledge of national consensus standards of quality assurance, such as, ASME B&PV Code, ISO, Six Sigma, ANSI/ASME NQA1 and Appendices, ANSI N45., IEEE Standards and U.S. NRC Regulatory Guide series Hands-on experience with Quality Management Systems (QMS) and testing methodologies. PREFERRED EDUCATION / EXPERIENCE Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Prior similar experience in heavy industry Either have ISO 9001:2015 credentials or willing to complete the required formal training upon hire. ASQ certification preferred. PHYSICAL JOB DEMANDS Lifting/carrying/moving 1-50 lbs. Involves sitting at a desk for extended periods of time. Manual dexterity to operate specialized equipment. Ability to hear telephone conversations and speak clearly. May need a high level of concentration in a busy area. WORKING CONDITIONS Monday through Friday. overtime, and may be required.

Department: Capital Markets Reports to: QC - Capital Markets FLSA: Hourly Essential Duties and Responsibilities Researching properties and resolving issues Perform title examination and examine the chain of title for a wide range of title orders, primarily residential Abstracts and analyzes records such as mortgages, liens, judgments, easements, vital statistics, and plat and map books to determine both ownership and legal restrictions and to verify legal description of property and completeness of records Resolves most issues such as missing information, incomplete, inaccurate or contradictory information contained in the title documentation Prepares initial title commitment documentation based on the application of procedural guidelines All other duties assigned Qualifications 3 years' experience with a national title agency in either Title Exam or Title Curative. High School diploma or equivalent Knowledge of real estate title searching Must demonstrate advanced organizational ability and strong communication skills, with a proven capacity to multitask effectively across multiple functions and priorities in a fast‑paced environment Knowledge of personal computers and Microsoft software products Advanced Microsoft Excel skills, including proficiency with VLOOKUP, Pivot Tables, and formula creation Language Skills Excellent written and verbal communication skills Ability to read, analyze and interpret common technical reports, and documentation Present information to executive and senior management teams, sales department, internal groups and/or clients Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell The employee must occasionally lift and/or move up to 25 pounds Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is exposed to weather conditions prevalent at the time. The noise level in the work environment is usually moderate

Job Title: Lab TechnicianJob Description As a Lab Technician, you will be responsible for developing operating procedures and performing tests for various water and wastewater treatment operations. Your role will involve conducting jar tests to determine and optimize chemical dosing, evaluating bench and pilot scale systems, and performing column and batch testing for ion exchange resins, carbon adsorption, and other filtration systems. Responsibilities Conduct jar tests to determine and optimize chemical dosing for various treatment approaches. Perform bench and pilot scale evaluations. Conduct columns and batch testing for ion exchange resins, carbon adsorption, activated alumina, and filtration systems. Collect data by measuring and recording operating conditions such as pumping rates, pH, ORP, temperature, and pressure. Operate and conduct light maintenance on small-scale equipment including pumps, heaters, and mixers. Prepare samples and reagents for testing and in-house lab analyses. Perform various laboratory analyses including DO, color, temperature, ORP, alkalinity, hardness, TSS, TDS, COD, TOC, turbidity, and phosphorus/phosphate. Pull samples for third-party laboratory analysis. Maintain reagents, lab inventory, calibration records, and SDS documentation for lab chemicals and reagents. Manage and communicate data effectively. Maintain the cleanliness of lab equipment and operating areas. Essential Skills Strong background in laboratory techniques, chemistry, and wet chemistry. Proficiency with standard laboratory instruments such as pH meters, TSS probes, HACH spectrophotometers, analytical balances, and volumetric glassware. Experience with instrumentation such as ICP, GC, and HPLC is preferred. Bachelor's degree in Chemistry, Physics, Biology, or a related field. Proficiency in Microsoft Excel and Word. Detail-oriented with the ability to work precisely in solution making, data handling, and instrument operation. Additional Skills & Qualifications Experience with titration, reverse osmosis, quality control, and quality assurance. Demonstrated initiative and willingness to learn and grow in responsibility. Ability to communicate effectively with team members and receive precise chemical data and procedures. Ability to work independently with minimal supervision. Work Environment This role requires working in a laboratory environment where you will use a range of technologies and equipment. You will work with small-scale lab equipment and perform light maintenance on them. The role demands attention to detail and adherence to safety protocols while maintaining the cleanliness of the work area and equipment. The work schedule and dress code will be in accordance with industry standards. Job Type & Location This is a Contract to Hire position based out of Canonsburg, PA. Pay and Benefits The pay range for this position is $22.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Canonsburg,PA. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Kurt J. Lesker Company is seeking a skilled Quality Control Technician to perform inspections and leak checks on our products in accordance with our quality standards. Key Responsibilities: Conduct visual, dimensional, and leak inspections using CMM and other equipment. Verify compliance with engineering drawings and specifications. Complete inspection documentation and maintain logs. Provide guidance to junior inspectors and assist in task assignments. Collaborate with Engineering and Project Management on inspection priorities. Ensure adherence to safety and company policies. Perform other duties as assigned. Qualifications: Required 8-10 years of experience in mechanical inspection, manufacturing, or quality control. Proficient in CMM operations and programming. Skilled in vacuum leak detection, SPC inspections, GD&T, and various inspection stages. Demonstrated leadership or supervisory experience. Strong computer skills and familiarity with quality management systems. Effective verbal and written communication skills. Preferred: Expert-level CMM knowledge. Proficiency in Microsoft Office. Benefits we offer to enhance your lifestyle: On-site gym and Running/Walking Trail Health & Wellness Programs including mental, physical, and financial (on-site yoga, meditation, seminars, flu shots, biometrics screening, annual 5K, waste pick up events, etc.) Comprehensive benefits, including medical, dental, vision, life, and disability insurances Recycling program and electric vehicle plug in station Paid time off 401(k) with employer match Office-wide events Employee recognition programs Kurt J Lesker Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. KJLC is committed to providing reasonable accommodations for persons with disabilities (unless doing so will result in undue hardship). If you need a reasonable accommodation for any part of the employment process, please send an e-mail to our human resources department at [email protected] or call ************** to provide the nature of your request.