Quality control technician jobs in Port Orange, FL - 149 jobs

Sage is looking for a Production Technician to perform asset processing, detailed evaluation, upgrade, and critical data security functions. This position has the responsibility to bring out the highest value of the products, while also protecting any sensitive data stored on the systems. Why Sage? Every team member makes the world a better place, every day. Our Mission is making the world more Sustainable by extending the life of electronics. Our clients are some of the largest enterprise technology users in the world, fueling rapid growth and numerous career opportunities to do well while doing good. RESPONSIBILITIES: Evaluates electronic assets and determines value based on physical and operational condition. Performs data security on electronic assets. Configures, upgrades and tests computer hardware and peripherals. Inspects, classifies, diagnoses, evaluates, disassembles, and repairs computer hardware. Evaluates and identifies hardware for specific disposition (resell, repair, harvest, recycle, etc.). Upgrades products through the addition of new hardware. Adjusts, repairs, and replaces worn or defective parts. Works with Sales to evaluate the feasibility to repair and/or upgrade assets. Enters detailed asset information into the ERP system that is not auto populated by the data security software. Evaluates inventory on hand to determine if parts are available for upgrade and/or repair. Submits orders for parts from inventory that are needed for upgrades or submit a request for parts that are not currently in stock. Installs operating system (OS) to computer products per procedure. Cross trains in all areas within Operations to ensure site flexibility and contribute to the development and ongoing improvement of the Operations systems and processes. Qualifications REQUIREMENTS: Associate's degree in a technology field, or equivalent experience 2+ years' experience working with hardware products, preferably in a repair related field Strong computer literacy Results oriented, team oriented, and excellent attention to detail Ability to travel to other sites or customer locations (10% of time) Ability to lift 50 lbs. or more Working knowledge of Microsoft Office Suite Diagnostic and troubleshooting ability BIOS configuration Ability to configure, repair and/or upgrade electronic assets Ability to identify and install pc hardware and peripherals Ability to understand and carry out instructions furnished in various forms (written, oral or diagram) Strong written, verbal, and comprehension communication skills OUR PASSION IS YOUR OPPORTUNITY! Our success with people directly impacts our success in meeting and surpassing our mission. Our investment in helping you to either further or start your career is essential to our success. So, if you're serious, we're serious about investing in investing in your career in the ITAD Industry! Let's connect and talk about your future! Sage Sustainable Electronics is on a mission: We're making the world more sustainable by extending the life of electronics. In simple terms, this means better value, less waste and a smaller carbon footprint for businesses. We provide a full range of lifecycle services for every hardware platform from the desktop to the data center to mobility. We don't recycle. In fact, we hate it. It's contrary to our reuse mission. But when recycling is necessary, we are proud to be certified e-Stewards because we are uncompromising about the responsible e-waste management. Sage Sustainable Electronics is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. Sage Sustainable Electronics does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment.

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************

Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? * Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. * Innovation: Be a part of a team that's shaping the future of construction and infrastructure. * Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. * Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: * Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment * Read and understand shop fabrication drawings and specs and verify dimensions of product or material * Perform internal audits and maintain quality control inspection records * Act as liaison to outside inspectors * Resolve quality issues due to production and fabrication errors * Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC experience preferred. * Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. * Ability to interpret readings from Micrometers, Calipers, and other QC tools. * Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

GENERAL PURPOSE Help to plan and develop systems and procedures to improve the operating quality and efficiency of the warehouse. Efficiently move gear inbound and outbound as well as doing Quality Control checks on gear upon return from show sites. Operate in accordance with company policies and procedures. PRIMARY RESPONSIBILITIES Preparation, organization, and coordination of equipment for shows as assigned. Loading and unloading of trucks. Driving box truck for delivery and pick-up of equipment Follow systems and procedures to improve the operating quality and efficiency of the department. Coordinate with Project Managers on the details of all shows. Assist Project Managers and other departments regarding show order details, truck pack and overall needs. Contributes to meet department productivity and quality goals. Communicate with Warehouse Manager regarding warehouse daily operations. Review inbound equipment that has been identified as malfunctioning. Diagnose, log and repair equipment that does not pass QC standards. Ensure outbound equipment has been checked and all accessories/parts are included. Organize, clean, and store all equipment that has been tested or returned. Maintain a safe and clean work environment. RELATIONSHIPS & ROLES Build upon the AVmedia culture, core values and core purpose by being always a role model. Forge excellent relationships with all internal and external customers. Sets examples for staff in areas of personal character, commitment, organizational, customer service and leadership skills, and work habits. Maintain high level of customer service with staff to ensure high levels of client satisfaction. Demonstrates ability to communicate, interact and cooperate with all company employees. Requirements KNOWLEDGE & SKILL REQUIREMENTS Ability to drive up to a 24' Box Truck. Since position requires driving a company vehicle, you must be in possession of a valid driver's license. A clean driving record over the past five (5) years is required. Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent. Must be able to lift 50lbs. Ability to effectively troubleshoot and assist others in troubleshooting Audio Visual equipment. Must be able to be stand for a majority of the shift. 1-3 years of experience working in a warehouse environment; working with audio, video, lighting, and screen systems. This position requires willingness to work a flexible schedule. Availability required Monday-Sunday, days and nights and holidays. KEY COMPETENCIES Critical thinking and problem solving skills Planning and organizing Decision-making Communication skills Resourcefulness Teamwork Adaptability Stress tolerance Sense of urgency AVmedia Inc. is an Equal Opportunity Employer.

Are you passionate about ensuring products meet the highest quality standards? At Alleima's Business Unit Medical, we turn advanced materials and engineering expertise into solutions that change lives. Partnering with the world's leading medical device innovators, we design, develop, and manufacture components and medical solutions that push the boundaries of what's possible in medical technology, from continuous glucose monitors to cochlear implants. Every micron of wire, every braid of nitinol and every millimeter of tubing we produce helps patients live longer and healthier lives. Join us in shaping the future of healthcare, where innovation meets impact. We are on an exciting growth journey, with new manufacturing sites, strategic acquisitions, and a rapidly expanding global footprint. With production facilities in Germany, Poland, Italy, Malaysia and the USA, we are proud to be a truly international team Your Role: As a Quality Control Technician at Alleima, you will play a crucial role in maintaining our legacy of excellence. Your primary responsibilities will include: -Performing first piece, in process, and final inspections of products to verify compliance with specifications, including documentation. -Conducting functional and dimensional testing using appropriate tools and equipment. -Verifying documented inspection, test data, traceability information is accurate, and GDP is maintained. -Assisting in root cause analysis and corrective action implementation for non-conformances in conjunction with cross-functional teams. -Maintaining calibration and proper use of inspection and measurement instruments. -Supporting internal audits and regulatory compliance activities. -Collaborating with production and engineering teams to resolve quality issues promptly, including continuous improvement. About you: You are a dedicated individual with a high school diploma or equivalent, and preferably a technical certification or associate degree. With 1-3 years of experience in a quality control or manufacturing environment, you possess basic math and measurement skills, strong attention to detail, and problem solving abilities. Your ability to learn and follow detailed procedures, coupled with basic computer skills for data entry and reporting, makes you an ideal candidate for this role. You are comfortable working in a manufacturing environment, standing for extended periods, and lifting up to 25 lbs. Your dexterity to handle, inspect, and test fine wire ensures you can perform your tasks effectively. You have the ability to perform detailed visual inspections of fine medical wire and components, including detection of minute defects and accurate identification of color-coded materials, with or without reasonable accommodation, including corrective lenses. Additionally, the ability to accurately distinguish color-coded wires, markings, and indicators used in the inspection and quality verification process is important. You have an interest in quality control and continuous improvement, and familiarity with basic inspection tools like calipers, micrometers, and microscopes is a plus. As a team oriented and dependable individual, you will thrive in our collaborative environment, contributing to our cycle of innovation and advancement. What you can expect from us: A workplace built on care, for better healthcare, for our customers, and for each other. A culture that values unique, novel solutions and high-quality standards. Opportunities to contribute to medical innovations that make a real difference. A collaborative, decentralized environment where your voice matters. Competitive compensation, benefits, and global career development. Health, Dental, and Vision coverage after 30 days 401K with company contribution of 5% plus matching after 90 days 88 paid holiday hours per year Paid time off (up to 120 hours paid time off after one year) Additional information: Why Alleima, BU Medical? We don't just make components; we enable breakthroughs. Whether it's helping someone with diabetes live more freely or supporting the next generation of neurostimulation devices, our work is purpose-driven and technically sophisticated. Ready to Make a Difference? Join us and be part of a team that's shaping the future of medical technology. ***************

Under supervision, the purpose of the position is to perform a wide rage of routine labor intensive work performing water main flushing, sample collection, customer service responses, as well as the maintenance and repair of hydrants, sample taps, flushing devices, and other equipment utilized in the Water Quality Division. Employees in this classification function at entry level, and are accountable for maintaining the functionality, cleanliness and appearance of hydrants, flushing water mains, and collecting water quality samples for regulatory compliance. Routine tasks are performed with some independence, and more difficult work is performed under direct supervision. Objective is to maintain utility systems and facilitate safe and efficient transporting of water throughout the City. The list of essential functions, as outlined herein, is intended to be representative of the tasks performed within this classification. It is not necessarily descriptive of any one position in the class. The omission of an essential function does not preclude management from assigning duties not listed herein if such functions are a logical assignment to the position. * Performing routine annual fire hydrant maintenance and flushing * Perform Uni - directional water main flushing • Perform various customer service related service work. Works with customers to resolve issues and complaints. * Installs, troubleshoots, maintains and repairs auto flushing systems and sample taps. * Collection of regulatory compliance or special samples. * Maintains daily work reports and preventive maintenance records, ensuring thorough documentation. * Performs the safe and proper operation of trade's tools and power equipment; adheres to prescribed safety standards and regulatory requirements. * Where applicable, will serve on emergency call duty; be available for emergency call back * Performs other duties as assigned. High School Diploma or GED: supplemented by one (1) year experience in public utilities or other large scale commercial plumbing systems, and the ability to operate tools of the trade; or an equivalent combination of education, training, and experience. General construction experience may be considered. Must possess and maintain a valid Florida Driver's License. Must obtain a Florida Level III Water Distribution license within 15 months of hire. * Ability to understand and follow verbal and written instructions. * Knowledge of the policies and procedures of utility systems installation, maintenance, and repair; knowledge of all City, State and Federal rules, policies, and regulatory standards applicable to the work. * Ability to read and interpret documents such as safety rules, operation and maintenance instructions, procedure manuals, and related documentation. * Ability to read and interpret blueprints and a variety of instructions in written, oral, diagram or schedule form. * Knowledge of the safe and proper use and care of manual and power hand tools and equipment utilized in the public water/wastewater utilities preventative maintenance and repair field. * Knowledge of and ability to utilize materials, methods and equipment used in excavation and general maintenance work. * Ability to establish and maintain effective working relationships and communications with other employees, contractors, vendors, and the public. * Ability to meet established deadlines and follow up on assignments with a minimum of direction. * Ability to update and maintain various records and reports, e.g., work order logs, inventory of materials, utility data bases. * While performing the essential functions of this job, the incumbent is regularly required to lift, move or carry objects up to 50 pounds; ascend or descend ladders, stairs, scaffolding, ramps, poles; utilize feet and legs or hands and arms; maintain body equilibrium to prevent falling when walking, standing, crouching, or navigating narrow, slippery, or erratically moving surfaces; bend body downward and forward by bending spine and legs; move about on hands and knees or hands and feet; use hands to finger, handle or feel objects; and to reach with hands and arms. * While performing the essential functions of this job the employee is occasionally required to push and/or pull up to 100 pounds. * While performing the essential functions of this position the employee is frequently exposed to fumes or airborne particles, toxic or caustic substances, excessive noise, vehicular traffic, and dampness/humidity. While performing the essential functions of this job, the incumbent is regularly exposed to possible bodily injury from electrical shock; falling from high, exposed places; and moving mechanical parts of equipment, tools, and machinery.

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Title: Production Technician Pay Rate: $ Location: Job Type: Full Time/Part Time | Non-Exempt Shift: [DAYS] | [SHIFT] Who You Are: You're a hands-on production pro who thrives in a fast-paced, quality-driven environment. With an eye for detail and a steady focus on consistency, you take pride in packaging and labeling premium cannabis products-from dried flower and pre-rolls to vape cartridges, pens, and infused items. You enjoy working with clear procedures, following safety and compliance standards, and collaborating with teammates to keep operations running smoothly. Your reliability and commitment to accuracy ensure every finished product meets Curaleaf's high standards before it reaches our customers. What You'll Do: As a Production Technician at Curaleaf, you'll play a key role in delivering high-quality cannabis products by supporting every stage of the packaging process. In this fast-paced, hands-on role, you will: Stage products and packaging materials across production lines while performing quality assurance checks to meet daily schedules and Curaleaf's high standards Boost operational efficiency and minimize waste by taking ownership, collaborating with the team, and communicating effectively Conduct in-process and final quality checks, including testing, visual inspections, and precise weighing, while maintaining 100% compliance in data recording, product tracking, and secure packaging Work quickly and efficiently to boost productivity while keeping the extraction room organized, clean, and inspection-ready Operate efficiently while following OSHA standards, Curaleaf SOPs, and all required procedures, ensuring every product is accurately labeled and fully compliant with state regulations What You'll Bring: You are eager to learn and can be trained on various production equipment and SOPs while consistently meeting performance expectations set by leadership You bring strong attention to detail and effective communication skills, thriving in a fast-paced, team-based production environment You can comfortably perform repetitive tasks with focus and consistency over extended periods You have a strong work ethic, are punctual and reliable, and help maintain a positive, professional team environment You have a high school diploma, GED, or equivalent Even Better If: You have at least one year of manufacturing or packaging experience focused on product safety, consumer satisfaction, and delivering high-quality results Physical Requirements Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift) Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance Frequent and repetitive use of hands and wrists for extended periods of time Repetitive bending, squatting, and reaching Ability to climb ladders or step stools to access plants or equipment Ability to use required PPE when required, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary Environmental Conditions Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis) Exposure to soil, water, fertilizer, dust, pollen and plant pathogens Exposure to cleaning solvents, such as high volumes of isopropyl alcohol Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels Curaleaf Pay Transparency$15-$15 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, Find, and Anthem provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is powered by a strong presence in all stages of the supply chain. Its unique distribution network throughout Europe, Canada and Australasia brings together pioneering science and research with cutting-edge cultivation, extraction and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent (1099 Sub-Contractor) Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Job DescriptionProduction Quality TechnicianThe Production Quality Technician plays a key role in ensuring the consistency, safety, and compliance of all manufactured products and processes. This position focuses on quality assurance for batch-manufactured products, incoming raw materials, packaging, labeling, outgoing shipments, product testing, and internal processes - all in alignment with ISO 9001:2015 and the company's Quality Management System (QMS). A strong quality mindset, excellent teamwork, communication skills, and attention to detail are essential for success in this role.Key Responsibilities • Develop a thorough understanding of all processes related to product manufacturing, identification, packaging, shipping preparation, and quality assurance for all products and materials. • Gain comprehensive knowledge of all product lines, documentation standards, and the EBS Quality Management System (ISO 9001:2015). • Perform quality testing, inspections, and reporting on both products and incoming materials. • Prepare, review, and correct Certificates of Analysis and other quality-related documentation. • Record test results and production data; utilize statistical software, data analysis techniques, and SPC charting to monitor and improve performance.• Safely handle, weigh, and transfer hazardous materials from bulk containers for use in production.• Perform calibration, verification, and maintenance on all equipment; monitor and record process and environmental data; prepare reports for management and regulatory agencies.• Maintain a compliant, organized laboratory notebook in accordance with intellectual property protection standards.• Investigate non-conformances and implement corrective and preventive actions. • Support continuous improvement and maintenance of the Quality Management System (QMS) by writing, reviewing, and updating procedures and documentation. • Maintain a clean and safe work environment; consistently adhere to all safety policies and protocols. Qualifications· • Associate degree or higher preferred; equivalent experience or certifications may be considered.· • Strong understanding of mathematics and statistics (beyond algebra).· • Proficiency with Microsoft Excel, Access, and Office Suite; experience with statistical or SPC software a plus.· • Strong mechanical aptitude and familiarity with basic hand tools.· • Excellent attention to detail and a commitment to product quality.· • Ability to read and follow Standard Operating Procedures (SOPs).· • Willingness to work overtime or weekends as needed, and adjust shifts to cover absences or vacations. Physical Requirements· • Ability to perform manual labor in hot, humid, or outdoor conditions as required.· • Work safely in environments with fumes, airborne particles, noise, and vibration while wearing proper Personal Protective Equipment (PPE).· • Physically capable of pushing or pulling objects over 100 lbs; lifting up to 70 lbs unassisted to chest height or on stairs; carrying 70 lb pails between work areas.· • Comfortable standing or walking for up to 3 hours, and able to stoop, kneel, crouch, bend, and twist as needed.· • Must have clear vision, including color recognition, depth perception, peripheral vision, and the ability to focus on fine details. E04JI800t97s4083npp

Full-time Description Job Description: Every boat that leaves the facility must meet or exceed Nautique's standards. This position assists production staff in finding solutions to problems and working with management to ensure the highest quality standards possible. Duties and Responsibilities: Ensures that all the quality check procedures put in place by the company are followed during every production phase. Approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Approves in-process production by confirming specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor. Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. Documents inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into a quality database. Keeps measurement equipment operating by following operating instructions and calling for repairs as needed. Maintains a safe and healthy work environment by following standards, procedures, and complying with legal regulations. Updates job knowledge by participating in educational opportunities; reading technical publications. Accomplishes quality and organization mission by completing related results as needed. Enforces quality procedures and notes the corrective actions that are taken when needed. Educates the production team on quality control issues and works with department managers to improve overall company safety and product quality. Performs product/process analysis for quality improvement. Represents manufacturing on cross-functional teams. Accomplishes all tasks as appropriately assigned or requested including keeping the work area clean and orderly. Must comply with all OSHA and safety procedures. Performs any other duties as assigned by management. Requirements Skills and abilities for success in this position: Excellent communication skills, including written, verbal, and visual. Excellent organizational skills and self-motivation. Ability to identify different models and read orders. Computer skills including Microsoft and ability to learn Quality programs. Some areas require added skills depending on QC location: Lamination, Gelcoat, Upholstery, Electrical & Water Testing; boat pulling, driving w/trailer; forklift certified. Ability to manage one's own time and respect the time of others. Ability to consider the relative costs and benefits of potential actions to choose the most appropriate one. Ability to work effectively individually or with a team. Ability to perform tasks under time pressure deadlines. Ability to communicate information and ideas so others will understand. Ability to tell when something is wrong or is likely to go wrong. Knowledge, Education, and Experience include but are not limited to the following: 2 years' experience with boats/or at Nautique. High school diploma or equivalent; college degree preferred. Must be a licensed driver with a good driving record (subject to MVR). Ability to check boats and or parts in accordance with Nautique's Quality System. Must have strong attention to detail. Physical and Work Requirements: Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature. Must be able to bend at the waist and knees and stand for extended periods. Must be able to climb into and out of the interior of boats. Must be able to wear proper safety equipment as needed. Must be able to lift 50 pounds when necessary. The ability to see details at close range. Be able to use and maintain small hand tools (grinder, scraper, razor knife, blower, etc.)

Job Summary: Focuses on analytical laboratory activities for specific testing involving HPLC; in addition, participation in a variety of food quality control analytical/microbiological support activities is required. Work is performed through the application of a body of knowledge related to standard laboratory methods, practices, procedures, policies, regulations, and laboratory materials and equipment. Duties and Responsibilities: Operates and maintains HPLC units Prepping and running samples following established protocol, responsible for maintaining instruments, calibrating, and following maintenance regimen. Prepare eluent and required reagents. Responsible for accuracy in the preparation of reagents, eluents, and standards. Performs chemical and physical analyses on a variety of samples, including food products and intermediate samples. Tests include but are not limited to organoleptic evaluations, pH, acidity titrations, sodium, nitrate/nitrite analyses, Brix, moisture, specific gravity, moisture, pulp content, etc. Performs required calculations and posts/maintains required spreadsheets. Performs microbiological analyses on a variety of products, following required aseptic techniques in media prep, sample collection, plating and bacteria identification. Logs samples and related pertinent information. Follows appropriate documentation and record-keeping procedures. Performs related work as assigned. Skills laboratory, Quality control, Gmp, Chemistry, Hplc, Quality assurance, Wet chemistry, Analysis Top Skills Details laboratory,Quality control,Gmp Additional Skills & Qualifications Manual skills: Ability to lift to 40 lbs. Manual labor required for this position. Occasional exposure to odors, dusts/powders and noise. Wearing of hairnet, facial hair covering (if applicable), hearing protection, mask, lab coat and goggles are required. Knowledge of laboratory tests and analyses. Strong attention to detail. Multitasking capability Self-motivated Must be able to stand for extended periods of time Comply with company regulations on personal protective equipment Ability to handle samples and laboratory equipment. Ability to handle heavy weight (up to 40 lbs.) Ability to make mathematical computations. Ability to keep records. Ability to communicate effectively. Ability to work in a team environment. Ability to organize and carry out assigned task or program. Ability to adapt new technology and methods to enhance program effectiveness. Experience Level Intermediate Level Job Type & Location This is a Contract to Hire position based out of Eustis, FL. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Eustis,FL. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Benefits: Competitive salary Dental insurance Health insurance Paid time off Vision insurance We are seeking a detail-oriented and experienced HVAC Quality Control Technician to ensure that heating, ventilation, and air conditioning systems meet project specifications, industry standards, and safety regulations. The ideal candidate will be responsible for inspecting HVAC installations, identifying deficiencies, and supporting the project team in delivering high-quality workmanship. Key Responsibilities: Conduct on-site inspections of HVAC installations, including ductwork, piping, equipment, and controls. Verify compliance with mechanical drawings, specifications, codes, and standards (e.g., ASHRAE, SMACNA). Monitor and document all phases of the HVAC installation process to ensure quality and safety. Perform functional tests and commissioning of HVAC systems to verify performance. Generate detailed QC reports, punch lists, and non-conformance notices. Collaborate with project managers, field technicians, and subcontractors to resolve issues. Review installation checklists and ensure accurate completion of documentation. Support internal audits and participate in continuous improvement initiatives. Stay current with changes in codes, regulations, and best practices. Qualifications: High school diploma or GED required; technical certification or associate degree in HVAC or Mechanical Engineering preferred. 3+ years of experience in HVAC installation, service, or quality control. Strong understanding of HVAC systems, codes, and quality standards. Proficiency in reading and interpreting mechanical blueprints and technical documentation. Excellent attention to detail and strong problem-solving skills. Ability to work independently and collaboratively in a field-based environment. Familiarity with quality management systems and reporting tools. OSHA 10 or OSHA 30 certification is a plus. Physical Requirements: Ability to lift up to 50 lbs, climb ladders, and work in confined spaces. Comfortable working in various indoor/outdoor environments. There are many exciting options for a career in HVACR waiting to be explored. If you're looking for a career that offers flexibility, job stability, strong pay, benefits and more, then you've come to the right place!

Job Title: Quality Control Inspector Division: FiOptix Inc FSLA Status: Non-Exempt Reports To: Project Manager Job Summary: This position is responsible for identifying and escalating quality deficiencies to support the completion of assigned work. Essential Duties and Responsibilities: Perform real time inspections evaluating safety, compliance standards, appearance, and customer experience Schedule and complete a final inspection of work prior to customer walkthrough Complete and submit timely and accurate quality control reports into the appropriate database Develop and maintain relationships with the quality control counterparts of our customers Respond appropriately to customer complaints and inquiries and escalate matters as required Execute target amount of job safety observations Identify areas of improvement to enhance quality and escalate recommendations to management Complete all required Company documentation Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: One-year telecommunications quality control experience One-year underground construction, aerial construction, and/or multi dwelling unit (MDU) experience Knowledge of highway traffic control standards Technical Skills: Computer and Microsoft Office proficiency Ability to use a wireless tablet Proven knowledge of utility depths and placement Proven ability to read and interpret design prints Soft Skills: Highly organized and detail orientated Strong verbal and written communication skills Ability to work independently and as a member of various teams Ability to multi-task and work in a fast-paced environment under tight deadlines Ability to lead, teach, and train other employees Physical Requirements: Must be able to pass pre-employment screening that includes background and drug testing Must have a valid driver's license and a driving record that meets Company requirements Must be in good physical condition with the ability to stoop, crawl, bend at the knees and waist, squat and lift up to 50 lbs. Ability to stand for long periods of time on varied surfaces Ability to work outdoors in all types of weather May be required to work long and unpredictable hours Ability to travel up to 100% of the time, including short notice travel. Travel includes local site travel or national travel depending on business needs. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations

Details: Introduction: Visium Resources has been asked to identify qualified candidates for this full-time Quality Inspector I position. This position is a direct hire opportunity, which will be on-site in Orlando, FL. Quality Control Inspector I Summary: The Quality Inspector 1 - Quality Control Inspector performs a variety of routine inspection procedures to ensure quality at various stages of production. Inspects incoming materials, in-process and/or finished parts and subassemblies for conformance to quality assurance standards. BENEFITS: Compensation & Benefits: Competitive Wage (based on experience). Bonus: Annual bonus based on achieving company and individual goals. Benefits: Comprehensive medical, dental, and vision coverage. Retirement: 401(k) savings plan. Paid Time Off. Life Insurance at no cost to the associate. Short/Long-Term disability at no cost to the associate. Opportunities for career advancement, professional development and so much more! Employment is contingent upon the success of background check and drug screening. Quality Control Inspector I Job Duties and Responsibilities: Responsible for performing inspections, including Incoming/Pre-production, In-process, Final Inspection and Pre-Ship Inspection. Conduct dimensional and visual inspections of manufactured parts and assemblies in accordance with engineered drawings. Proficient in using micrometers, calipers, thread & pin gauges, no-go gauges, height, and angle gauges to verify mechanical part compliance. Measures dimensions such as length, height, and distance between reference points to ensure product meets specifications. Compile data and documents findings and provide information regarding rework/reject data to more experienced personnel for validation. Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. Demonstrates accuracy and thoroughness; Monitors own work to ensure quality. Must be familiar with data entry and proficient with Microsoft Office and be able to complete all documentation for receiving inspections. Completes work in a timely manner, and work efficiently. Must be able to complete training to achieve proficiency in use of Optical Metrology Systems, XRF measuring instruments, and associated modules within client's ERP system. Must be able to view ITAR data without a license. Details: Quality Control Inspector I Requirements: Knowledge, Skills, & Abilities: Proficient Microsoft Word and Microsoft Excel software skills. Attention to detail and clear communication skills. Knowledge of IPC-A-610, IPC-J-STD-001 preferred Knowledge of GD&T desired Education, Experience and Training: High School Diploma or Equivalent 1-3 years of applicable experience is desired 1-3 years of previous experience in Quality Control Inspection of electronic devices is desirable. Experience working in an ISO 9001/AS9100 certified manufacturing environment is desired. ________________________________________________________________________________________________ Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium. Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.

The Technical Engineer JNY provides engineering and technical execution support to the design, integration, testing, fielding, and sustainment of Training Aids, Devices, Simulators, and Simulations (TADSS). The individual applies technical expertise to ensure systems meet operational training requirements, technical specifications, and lifecycle performance objectives. Responsibilities include supporting engineering analyses of TADSS capabilities; assisting with development and review of technical requirements, specifications, interface control documents, and system documentation; and supporting system integration activities across hardware, software, networks, and training enablers. The Technical Engineer participates in technical interchange meetings, design reviews, and working groups to identify risks, resolve issues, and ensure technical alignment with objectives. Additional duties include supporting test and evaluation activities; assisting with data collection, analysis, and reporting; supporting configuration and change management activities; and contributing to development of technical reports, briefings, and acquisition artifacts. The role collaborates closely with systems engineers, test engineers, military doctrine analysts, acquisition analysts, logisticians, and leadership to ensure technical solutions effectively support Army training outcomes. The Technical Engineer provides practical, hands-on engineering insight and recommendations to improve system performance, interoperability, maintainability, and training effectiveness across portfolios. Required Education * Bachelor's degree in Engineering, Systems Engineering, Computer Science, Information Technology, or a related technical discipline Required Experience * Minimum of 3 years of experience supporting engineering or technical activities within a DoD, Federal, or defense training environment * Demonstrated experience with: * Technical analysis and system support * Integration or test support for training systems or TADSS * Technical documentation and reporting * Coordination with engineering, acquisition, and program teams * Active Secret Clearance Preferred Qualifications * Familiarity with: * TADSS development, integration, or sustainment * Systems engineering lifecycle processes * Test & Evaluation support for training systems * Prior military or Army training systems experience

Full-time Description JE Technology Solutions, Inc., a designer and manufacturer of Aircraft Ground Equipment, is seeking a talented, experienced, and highly-analytical Quality Control Inspector to join our production department. As a Quality Control Inspector, you will uphold the safety regulations of our company and supervise the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with excellent technical and math abilities. Responsibilities: · Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. · Reject all products and materials that fail to meet quality expectations. · Read drawings and specifications to understand the requirements of products and services. · Utilize tools such as eDrawings and Isometric Views on drawings to verify orientation of items during inspection. · Measure product dimensions, examine functionality and compare the final product to the specifications. · Recommend improvements to the production process to ensure quality control. · Document inspection outcomes by completing detailed reports. · Measure and record Quality Control related KPIs, such as First Pass Yield. · Communicate and confirm defects have been corrected with the production team. · Promote Quality-At-The-Source best practices to improve product excellence. · Ability to problem solve using tools like “ask five whys”. · Observe the production process. · Prioritize prompt response to production floor to ensure continuous flow of production. · Collaborate with the quality and manufacturing teams to resolve quality-related issues in a timely manner. · Participate in functional testing of products such as load testing, electrical testing, pressure testing, etc. · Ability to follow company Standard Operating Procedures and uphold Workmanship Standards. · Add occasional need to travel for field inspections including military bases. Requirements High school diploma or equivalent qualification. Certification in quality control is preferred. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math and technical skills. Strong understanding of quality control standards and testing techniques. Willing to work shift from 5:00 a.m. to 3:30p.m., 4 days/week. Preferred Skills: · Quality Inspection · Welding Inspection · Proficiency with inspection equipment, such as: o Tape Measure o Calipers o Dial Indicator o Multimeter o Pressure Gauges o Thread Gauges o Gauge Blocks · Familiarity with PCMM inspection equipment including probe and scanner attachments is a plus · Quality Control · Dimensional Inspection · ISO 9001:2015 Awareness · Experience with GD&T is a plus · Manufacturing Processes and Procedures · Familiarity with AS9100 is a plus · Experience with NDT and Magnetic Particle Inspection is a plus JE Technology Solutions, Inc. is a Drug Free Workplace. All offers of employment by JE Technology Solutions, Inc. are contingent on completion of a drug test within 2 business days of your offer acceptance and a background check with results in compliance with company policy. JE Technology Solutions, Inc. uses E-Verify to confirm employment eligibility for roles based in the United States. JE Technology Solutions is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, veteran or disability status.

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. **The pay rate for this role in Florida is $33.40 per hour.** **Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************** **Responsibilities :** + Perform NDT (Non Destructive Testing) inspection of welds, ride structure, and ride vehicles + Execute overhead rigging safety inspections + Complete various mechanical inspections + Perform rope access inspections + Cast members may be required to handle cleaning chemicals and supplies + Additional Personal Protective Equipment (face shields, goggles, refillable hand sanitizers, etc.) may be required **Basic Qualifications :** + Minimum of 3 years' experience performing weld inspections or equivalent visual inspections + Minimum of 2 years' experience documented as a Level II NDT Certified Inspector in magnetic particle and liquid penetrant inspection + Ability to read and work from blueprints, schematics, sketches, and verbal instruction + Familiar with non-destructive test techniques and basic mechanical measurement equipment + Ability to perform rope access work + Ability to lift up to 50 pounds + Excellent written and interpersonal communication skills + Proficiency in standard office software programs and mobile electronic devices **Preferred Qualifications:** + SPRAT Rope Access Certification + Familiarity with ultrasonic digital thickness measurement + Computer literate + Knowledge of AWS and ASME codes + Mechanical inspection experience or ASQ Mechanical Inspector Certification. + Certified Welding Inspector (CWI) **Additional Information :** **Schedule Availability:** Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year. Schedules and start times are subject to vary. **We proudly and enthusiastically encourage qualified individuals with experience in the U.S. Military to apply.** Keyword: WDW Casting WDW: Walt Disney World Casting Hourly Jobs **Job ID:** 1232675BR **Location:** Orlando,Florida **Job Posting Company:** "Walt Disney World Resort" The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

Job Summary: Focuses on analytical laboratory activities for specific testing involving HPLC; in addition, participation in a variety of food quality control analytical/microbiological support activities is required. Work is performed through the application of a body of knowledge related to standard laboratory methods, practices, procedures, policies, regulations, and laboratory materials and equipment. Duties and Responsibilities: Operates and maintains HPLC units Prepping and running samples following established protocol, responsible for maintaining instruments, calibrating, and following maintenance regimen. Prepare eluent and required reagents. Responsible for accuracy in the preparation of reagents, eluents, and standards. Performs chemical and physical analyses on a variety of samples, including food products and intermediate samples. Tests include but are not limited to organoleptic evaluations, pH, acidity titrations, sodium, nitrate/nitrite analyses, Brix, moisture, specific gravity, moisture, pulp content, etc. Performs required calculations and posts/maintains required spreadsheets. Performs microbiological analyses on a variety of products, following required aseptic techniques in media prep, sample collection, plating and bacteria identification. Logs samples and related pertinent information. Follows appropriate documentation and record-keeping procedures. Performs related work as assigned. Skills laboratory, Quality control, Gmp, Chemistry, Hplc, Quality assurance, Wet chemistry, Analysis Top Skills Details laboratory,Quality control,Gmp Additional Skills & Qualifications Manual skills: Ability to lift to 40 lbs. Manual labor required for this position. Occasional exposure to odors, dusts/powders and noise. Wearing of hairnet, facial hair covering (if applicable), hearing protection, mask, lab coat and goggles are required. Knowledge of laboratory tests and analyses. Strong attention to detail. Multitasking capability Self-motivated Must be able to stand for extended periods of time Comply with company regulations on personal protective equipment Ability to handle samples and laboratory equipment. Ability to handle heavy weight (up to 40 lbs.) Ability to make mathematical computations. Ability to keep records. Ability to communicate effectively. Ability to work in a team environment. Ability to organize and carry out assigned task or program. Ability to adapt new technology and methods to enhance program effectiveness. Experience Level Intermediate Level Job Type & Location This is a Contract to Hire position based out of Eustis, FL. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Eustis,FL. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.