Quality control technician jobs in Redondo Beach, CA

With a legacy spanning over 35 years, Harris Spice has been a trusted partner and leading supplier of high-quality spices, herbs, and innovative seasoning blends. With international facilities and a global supply chain, we proudly serve multiple channels of trade-including industrial bulk, food service, and retail. Our commitment to excellence, quality and consistency has earned us the trust of some of the nation's largest and most recognized brands. As Harris Spice continues to grow, we are dedicated to cultivating a dynamic, inclusive workplace where innovation thrives. We're looking for diverse, talented individuals who are ready to grow with us and help strengthen a brand known for trust, quality, and bold flavor solutions. Position Overview/Job Summary: We are looking for a 1st shift (4:30am-1:00pm) Quality Control Technician to join our team. The Quality Control Technician is responsible to ensure food safety and quality of plant through enforcement of HACCP, and Good Manufacturing Practices (GMPs) are followed by all personnel and to confirm each product meets specifications and quality parameters. Essential Job Functions: Performing pre-operational inspections at beginning of shift or production line changeovers to achieve on-time start-up and first-time quality. Collect raw material samples upon receipt and report any discrepancies to Quality Manager. Verify correct raw materials and packaging are being picked, staged, and used in production. Determine the acceptability of products using visual inspections, sampling, and testing protocols (when necessary). Perform detail-oriented tasks to support production such as checking legible lot codes, “best by” dates, container seals, handling production line rejects, etc. Enforce good manufacturing practice Provide support to the production department to minimize downtime and run efficiently. Maintain orderly paperwork and verify accurate documentation among production, quality, sanitation, maintenance, warehouse, and R&D departments. Organize production and quality records by following established protocol. Perform, log, and verify metal detector checks and provide training to production coworkers. Escalate issues of non-conforming products in a timely manner to management and segregate or place on hold. Interact and support cross-functional department personnel and adapt to change in a fast-paced environment. Ability to work with minimum supervision. Follow and enforce personal safety procedures and escalate to management. Other duties as assigned. This position has no direct reports but may assist in training coworkers and/or covering absences. This describes just some of the main duties, activities and responsibilities for the role which may change at any time with or without prior notice. Skills/Qualifications: 1-2 years of experience in a quality or lab role, preferably within a food manufacturing environment. Knowledge of sanitary food lab techniques and equipment. Able to read Standard Operating Procedures and follow instructions. Able to interpret product specifications. Good communication skills Understand and apply company and customer quality standards. Comfortable working with Microsoft Office and other production or lab information systems as needed. English fluency required, bilingual Spanish a plus. Physical Requirements: Ability to stand in a lab environment, ability to lift 55lbs, and handle food samples in a sanitary manner Sit, use hands & arms, twist, bend, push or pull Walking, standing, stooping, bending, kneeling, pulling, pushing, twisting, climb etc. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Harris Spice reserves the right to revise or change job duties and responsibilities as the need arises. Equal Employment Opportunity Statement Harris Spice is a certified Minority-owned business. Our business is an equal opportunity employer committed to a diverse and inclusive workforce. Applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), age, sexual orientation, national origin, marital status, parental status, ancestry, disability, gender identity, veteran status, genetic information, other distinguishing characteristics of diversity and inclusion, or any other protected status.

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Quality Control Inspector Needed in Camarillo Direct Hire Industry: BioTech, Pharmaceuticals Pay range: $23 - $24/hour Monday - Friday 7am - 3:30pm Must Have * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Job Summary Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Essential Functions * Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; * Conduct inspection and testing related to: ► Incoming product. ► First article. ► In-process. ► Final. * Initiate nonconformance reports (NCR). * Performs all aspects of testing related to manufacturing. o Incoming inspections o In-process inspection. o Final Inspection release of finished goods. o Document review. o Supports cross functional departments investigate potential non-conformance's observed * Ensures that all inspections and procedures are properly completed and documented. * Perform pre and post-inspection of product gamma irradiation process. * Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. * Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations * Prepare and submit Metrics reports to the quality supervisor or QC lead * Comply with all safety requirements ensuring work areas meet standards. * May be required to report to multiple facilities within a 2-mile radius. * Job Order document review and release * Other duties as assigned Education * High School Diploma or equivalent with 2 years of experience in quality control inspections. Required Experience & Competencies * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. * Solid organizational and planning skills required. * Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. * Must be able to work effectively and efficiently in a team environment. * Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. * Must display personal accountability for results and integrity. * Must display eagerness to learn and continuously improve. * Must have uncompromising dedication to quality. * Good general mathematical skills. * General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges * General computer skills. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Job Title: Laboratory Technician (Quality Testing) Pay Rate: $23/Hr Duration: 12 Months Shift: 7:30 AM to 4 PM Our client is a global industrial and consumer products manufacturer. We are looking for a Quality Control Technician Perform standard quality control testing on incoming raw materials, semi-finished goods, and finished goods according to specifications. Accurately calculate and report test results. Able to locate needed test methods, SOPs, and work instructions in the document management system. Record test data into the SAP database. File and maintain the retain samples; dispose of old retain samples per retention protocols. Maintain a clean working environment, including lab benches, the retain sample room, ovens, and the hood. Participate in Quality Lab 5S activities. Actively participate in daily Quality Lab/department (MOS) meetings. Complete, maintain, and control the required Quality records and/or documents as directed by the department's standard operating procedures. Use proper Good Documentation Practices (GDPs) when recording information. Perform and support validation and calibration of lab equipment, including documenting and reporting equipment issues within the lab. Assist Quality Engineers with complaint investigations and testing samples/reports. Comply with all Health, Safety, and Environmental rules, procedures, and regulations. Support training efforts within the lab and maintain status for all learned test methods and requirements. Proficient in SAP in regard to Quality Lab transactions. Also including all responsibilities entailing the upkeep of the Quality Department and any assigned projects determined by the departmental Manager, Supervisor, and Leads. Qualifications: Associate degree in chemistry or equivalent college credit or 3 years minimum technical/lab experience. The Quality Control Technician plays a critical role in ensuring product integrity and compliance by conducting standardized testing and analysis on raw materials, in-process items, and finished goods. This position supports the broader Quality Department by maintaining accurate records, calibrating lab equipment, and contributing to continuous improvement initiatives. The role requires strong attention to detail, proficiency in SAP, and adherence to safety and documentation protocols, while also collaborating with cross-functional teams to uphold quality standards throughout the production process. Experience in Quality Control preferred. Background in materials testing - viscosity testing, melting point testing, and general lab testing. Knowledgeable in the use of laboratory equipment and instruments. Good communication skills - verbal and written. Able to work well in a team environment. Computer literate - MS Office

Department: Cardiac Cath Lab FLSA Status: Non-Exempt - 12 week Contract Shift: 8 hours, Days Join Premier Healthcare Staffing as a Certified Cath Lab Tech and step into a high-impact, day-shift contract where your expertise truly matters. You'll work alongside a skilled cardiovascular team, operate advanced technology, and play a vital role in delivering life-saving care-all within a supportive environment that values your experience. Enjoy competitive pay while elevating your career and making a difference from day one. EDUCATION, EXPERIENCE, TRAINING Requires previous experience assisting with scrubbing procedures in a Cardiovascular Lab. ARRT-R and license required Cardiovascular technician training program with emphasis in invasive cardiology and hemodynamic monitoring. BCLS (AHA) required upon hire and maintain current. Advanced Cardiac Life Support (ACLS); required. Proficient computer skills. Premiere Healthcare Staffing is here to help you on your career journey! We place talented candidates with our partner healthcare facilities with the shared goal of providing exceptional, compassionate care. Award-winning hospital partners across the nation Dedicated career specialists to support you every step of the way Immediate and flexible opportunities to create your career journey Tailored career pathway where you can thrive personally and professionally

The **Quality Technician III** supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. **Position Responsibilities** + Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks + Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database + Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers + Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms + Leads & facilitates problem solving activities such as Fishbone, 5-Why, Fault-tree, etc. Plans and coordinates QA Technician I and II activities and provides general guidance + Support DCMA Source Inspection process + Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection + Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system + Develops and maintains process instructions for quality-related activities + Works on assignments that are moderately difficult, requiring judgement in resolving issues or in making recommendations + Other duties as assigned **Basic Qualifications (Required Skills & Experience)** + High School Diploma or GED equivalent + 2 - 4 years of related work experience is required or equivalent combination of education, training, and experience + Has Aerospace quality management system experience (AS9100DD) and/or internal audit experience + Demonstrated expertise in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. + Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 + Strong computer skills and is proficient in MS Office Suite (Word, Access, PowerPoint, Excel) + Must be able to fill out the necessary flight test documentation + Must document any/all non-conformances encountered + Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components + Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results + Must have a valid California driver's license and clean driving record **Other Qualifications & Desired Competencies** + 2-year technical degree preferred; Quality system courses and/or equivalent experience preferred + Must able to work efficiently in a fast-paced, high-volume environment + Required to travel to and from remote flying sites on a daily basis + Solid ability to accurately record and manage data, records, files and other documents to support tasks + Good knowledge of FAI validation and verification process requirements + Good knowledge of engineering drawings and specification systems + Has an analytical approach to problem solving and high organizational skills in a fast-paced environment as well as effective time management, interpersonal and communication skills + Strong ability to manage time and prioritize tasks + Receives little instruction on daily work, general instructions on newly introduced assignments. Has substantial understanding of the job and applies knowledge & skills to complete wide range of tasks + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Has effective problem-solving, analytical, interpersonal and communication skills. Focuses on teamwork, collaboration and puts the success of the team above one's own interests + Willingness to work overtime also a must **Physical Demands** + Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) + Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) + Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) **Clearance Level** Clearance Level The salary range for this role is: $26 - $37 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency. **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Ruggable is a leading direct-to-consumer e-commerce brand based in Los Angeles, California with an extraordinary track record of high, profitable growth. We pride ourselves on having an extremely loyal customer base and a talented team made up of genuinely caring people who take action and deliver results. We are venture-backed and own a patented washable rug design that's disrupting the home décor industry. Our mission is to empower our customers to live vibrantly with beautiful products that don't compromise on function. If you're passionate about consumer products, e-commerce, and high-growth start-ups, keep reading! Please note, this role is onsite five days a week, Monday through Friday, 7-4 or 8-5 pm. Job Summary: We are seeking a Quality Technician to support our daily manufacturing operations. This role helps ensure every product meets our quality standards by supporting the systems that keep our output consistent for customers. The Quality Technician will work closely with on-site Quality, Production, and Engineering teams to identify issues, assist with corrective actions, and reduce variation in our processes. This position plays a key role in maintaining reliable, repeatable production and ensuring compliance with both customer and internal standards. What You'll Do: * Perform routine quality checks, measurements, and visual inspections to ensure products create exceptional experiences for our customers * Support on-site manufacturing quality process control activities and maintain accurate documentation * Assist in maintaining quality records, equipment logs, and inspection documentation to support consistent production and compliance * Work directly with local Production, QA, and Engineering teams to provide data and observations during root cause analysis (RCA/CAPA) efforts * Monitor visual and dimensional product characteristics, especially color consistency, and promptly communicate discrepancies to supervisors * Collect, organize, and report quality and process data for trend analysis and continuous improvement What You'll Need to Have: Required: * Associate degree in a technical field or equivalent hands-on experience in quality * 0-1 years of experience in a production, quality, or manufacturing support role * Working knowledge of basic quality tools (control charts, check sheets, 5 Whys, basic FMEA concepts) * Ability to perform accurate measurements, visual inspections, and data collection * Proficiency with Google Sheets/Excel and basic data analysis techniques * Strong attention to detail, communication, and teamwork skills * Comfortable working in a fast-paced manufacturing environment Preferred: * Experience with visually critical characteristics such as color consistency * Exposure to quality audits, feedback loops, or process verification activities * Familiarity with ISO standards or retail/consumer product compliance * Experience in wholesale, retail, or direct-to-consumer manufacturing environments' Compensation: * $69,000-80,000 annual salary range (depending on location and experience) * An annual bonus percentage that varies based on level of role * Employer matching (up to 3% of base salary) for company sponsored 401k plan At Ruggable, we offer competitive compensation and benefits packages. Ruggable is an Equal Employment Opportunity employer. We proudly recruit and hire a diverse workforce and are committed to creating an inclusive environment for all employees. If you are based in California, we encourage you to read this important information for California residents linked here. To all recruitment agencies: Ruggable does not accept unsolicited agency resumes. Please do not forward resumes to our jobs alias, Ruggable employees or any other company destination. Ruggable is not responsible for any fees related to unsolicited resumes.

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview As a 2nd shift Quality Technician on our battery assembly line, you will play a critical role in ensuring that our battery modules meet the highest standards of quality and reliability. You will be responsible for inspecting, testing, and verifying that our products comply with industry standards and Harbinger's specifications. This position requires a detail-oriented individual with a strong commitment to quality and continuous improvement. What You'll Do: Inspection and Testing: Perform inspections and tests on battery modules or components to ensure they meet all quality standards and specifications. Data Collection and Analysis: Collect and analyze data from inspections and tests to identify trends, anomalies, and areas for improvement. Documentation: Maintain accurate and detailed records of inspection results, test data, and quality metrics. Non-Conformance Management: Identify and document non-conformances, and work with production and engineering teams to implement corrective actions. Training and Support: Provide training and support to production staff on quality standards, inspection techniques, and best practices. Compliance: Ensure all quality control activities comply with company policies, industry standards, and regulatory requirements. Who You Are: Education: High school diploma or equivalent; an associate degree or technical certification in quality control, manufacturing technology, or a related field is preferred. Experience: Previous experience in quality control or quality assurance in a manufacturing environment, preferably in the automotive or battery industry. Technical Skills: Proficient in the use of inspection and testing equipment, such as calipers, micrometers, multimeters, and specialized battery testing tools. Problem-Solving: Strong analytical and problem-solving skills with the ability to identify root causes and implement effective solutions. Attention to Detail: High level of attention to detail and accuracy in performing inspections and documenting results. Communication: Excellent verbal and written communication skills with the ability to effectively convey quality-related information to team members and management. Teamwork: Ability to work collaboratively in a team environment and contribute to a positive work culture. Flexibility: Willingness to adapt to changing priorities and work in a fast-paced start-up environment. Physical Requirements: Ability to stand for extended periods and perform repetitive tasks. Manual dexterity to handle small components and delicate inspection tools. Capacity to lift and move materials weighing up to 50 pounds. Hours: This role is assigned to Shift 2 / standard hours (4:00pm - 12:30am) , and the shift schedule is subject to change. California Pay Range $25-$32 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

Full-time Description The Supplier Quality Technician job duties involve supporting quality, business, and other processes in a team-based manufacturing environment. Performs activities in various cross-functional areas, including production planning and control, total quality management, systems, manufacturing, equipment and facilities engineering, material management, and process reengineering. Apply knowledge of SAP and work processes to manage database administration, purchase price variance, invoice discrepancy resolution, vendor registration, credits, and OA support. Requirements DUTIES AND RESPONSIBILITIES Preparing and maintaining quality management documentation Coordinates root cause analysis and corrective action responses to customer complaints, internal product or process nonconformance, and audit findings Completion of internal audits Foster, inspire, and motivate team members to focus on continual improvement of products, processes and systems Analyze quality data in order to find areas for growth. Determining data-driven solutions and implementing quality improvement plans Oversee the efficient implementation of quality standards, programs, and processes to improve operational efficiencies and reduce/eliminate production waste. Interface with Suppliers for Certification/Quality Requests Support Supplier Quality Investigations with the Group Quality Team FAI creation and Review CoC Compliance Review/Approvals Support Group Quality Inspectors on various compliance activities Assistance with Customer Containment NOE Support Support creation and analysis of Group Supplier Quality Metrics EDUCATION AND EXPERIENCE Bachelor's Degree preferred or relevant experience equivalent to education Minimum 2 years' experience in supplier quality management or equivalent role. Previous experience in an aerospace, manufacturing environment highly desired. REQUIRED SKILLS Must have good analytical, problem-solving, and analytical skills Strong interpersonal and verbal and written communication skills Works well under pressure, prioritize projects and be deadline oriented Experience AS9100, ISO9001 or other ISO related standard desired Proficiency in Office 365. Excellent communication, interpersonal, and public speaking skills Excellent decision-making and problem-solving skills Strong organizational skills. Fluent in reading, writing and speaking/understanding English. Must be able to pass Visual Acuity requirements (color, depth perception and field of vision). This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. PHYSICAL REQIREMENTS Stationary Position: frequently remains stationary up to 90% of the time and sitting up to 8 hours in a day Move/Traverse: infrequently bend, stand, stoop and/or walk Carry Weight: infrequently carry weight and/or lift objects (light to heavy) weighing up to 10 pounds Hearing and Speech frequently communicates with the ability to hear and talk on a regular basis with employees, coworkers, and all personnel matters; must be able to exchange accurate information in these situations Sight: frequent use of sight to detect images on computer, office documents, and office objects near and far Climb: occasionally ascends/descends on stairway to get to office upper and lower floors.

The Quality Engineer Associate supports the Quality team in achieving Summit's goal of Perfect Quality by assisting in the monitoring, documentation, and improvement of quality systems and processes. This role works closely with operations, manufacturing, and engineering teams to ensure products meet internal and customer expectations, as well as IPC standards for printed circuit boards. Ideal for a candidate beginning their career in quality engineering or manufacturing, this position offers the opportunity to develop hands-on skills in quality systems, inspection, data analysis, and continuous improvement within a high-tech manufacturing environment. The goal is to develop into a full Quality Engineer. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: In-Process Quality Support Learn and conduct in-process inspections, quality checks, and test data collection Maintain accurate documentation for quality records, logs, and forms Support the calibration system and assist with calibration tracking Help monitor process performance using basic data collection and analysis tools Participate in internal audits and prepare data or records as needed Documentation and Reporting Assist in maintaining document control procedures Support the generation of quality reports, charts, and metrics Help track nonconforming material and participate in root cause analysis Input and track Corrective Action Requests (CARs) and Supplier CARs (SCARs) Process Improvement Support Quality Engineers in continuous improvement activities Help identify opportunities for reducing defects and improving yields through performing data analysis and area assessments. Assist with implementation and monitoring of statistical process control (SPC) where needed Customer and Supplier Support Support customer quality surveys, tours, or audits as needed Assist with returned material analysis and simple failure analysis tasks Coordinate with outside test or lab services to support inspection processes 2. Goals Continuously provide assessments and work collaboratively to support improved process controls and yields. Develop measurement parameters to track progress. Work both individually and as part of a cross-functional team to support timely customer deliverables and inquiries. Education/Experience: Required: Associate's or Bachelor's degree in Engineering, Industrial Technology, or related field - or equivalent experience in a manufacturing/quality environment Basic understanding of quality principles and manufacturing processes Proficient in Microsoft Excel, Word, and PowerPoint Strong attention to detail and organizational skills Willingness to learn technical standards (e.g., IPC) and quality systems Interest in working in a hands-on capacity with tools in the laboratory and manufacturing areas, as well as, in performing data analysis. Ability to communicate clearly and work collaboratively across departments Preferred: Prior internship or experience in a quality, manufacturing, or engineering role Familiarity with inspection tools (calipers, micrometers, gauges, etc.) Exposure to ISO 9001 or similar quality management systems Understanding of SPC, basic statistics, or root cause analysis tools (5 Whys, Ishikawa) Physical Demands: Employee may lift and/or move up to 25 lbs as required to perform duties. Excellent concentration and must be able to remain focused in a dynamic fast-paced environment. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Irvine Scientific (dba FUJIFILM Biosciences), we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Irvine Scientific (dba FUJIFILM Biosciences). Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*******************).

The Quality Technician, under minimum supervision, shall perform quality assurance activities such as incoming inspection, in-process inspection, and final inspection. Shift: 2nd Shift (2:00 PM-10:30 PM, Monday-Friday) Essential Functions Follow all employee guidelines and Quality System requirements as defined by ClearPath Medicals practices, policies and Standard Operating Procedures to ensure customer and FDA requirements are met. Demonstrate knowledge and act in accordance with ClearPath Medicals Employee Guidelines and applicable quality standards as outlined in ClearPath Medicals Quality Manual. Perform incoming inspection activities, including first article inspection. Perform in-process inspection, including periodic audits of manufacturing work-in-process. Perform final inspection and release, including review of paperwork to ensure that all required inspections and traceability have been documented. Coordinate preventive maintenance and calibration activities. Accurately record process documentation. Must be able to thoroughly interpret, read and follow all work instructions, assembly drawings and other manufacturing/test documentation. Perform other duties as assigned. Must comply with all safety requirements. Required Education Required: Minimum High School diploma or GED. Preferred: Two-year degree (Associates or technical certification) in electronics/advanced mechanics or an equivalent combination of education and relevant work experience in medical devices within a QSR/FDA regulated environment. Required Skills Basic measurement skills using a variety of hand tools and electronic equipment such as rulers, scales, micrometers, calipers, and similar items. General computer skills, including Excel spreadsheets. Simple math skills, including understanding of fractions, cross multiplication, and calculator use. Must be able to work in a fast-paced work environment while performing quality duties. Excellent hand and eye coordination. Excellent attendance and a positive attitude. Good written and oral communication skills; must have the ability to communicate effectively and project a professional image when giving and taking information in writing and in person. Ability to follow verbal and written instructions. Good analytical skills including the ability to identify potential problems. Attention to detail. Capable of both communicating and understanding the English language. Working knowledge of IPC 610, IPC 620, and J-STD standards. Required Experience Previous quality experience in electro-mechanical assemblies and/or other medical devices is desired but not required.

To ensure reliable, high-quality production performance by building, maintaining, and troubleshooting mechanical systems while performing quality inspections, supporting field investigations, and validating product performance in real-world environments. Onsite position with occasional field work- Local Candidates only being considered for this role. No sponsorship offered Key Responsibilities Mechanical / Manufacturing Support Assemble, install, and maintain mechanical systems, jigs, fixtures, and automated equipment. Perform preventive and corrective maintenance on production machinery, tooling, and fixtures. Support engineering with equipment setup, calibration, and functional testing for new product introduction (NPI). Troubleshoot mechanical issues, including pneumatics, hydraulics, and mechanical drive systems. Document maintenance activities, parts usage, and equipment reliability metrics in CMMS/MES systems. Quality Inspection & Assurance Conduct in-process, incoming, and final inspections using calipers, micrometers, CMM, gauges, and/or other metrology tools. Validate mechanical and cosmetic characteristics against engineering drawings and GD&T requirements. Support root cause analysis (RCA) and participate in corrective and preventive actions (CAPA). Maintain documentation such as defect logs, inspection reports, NCRs, and control charts. Assist with calibration and verification of quality inspection equipment. Quality Field Visits (As Needed) Travel to customer sites, contract manufacturers, suppliers, or field environments to investigate quality or performance issues. Perform onsite inspections, failure analysis, and operational assessments under real-world conditions. Collaborate with customer service, engineering, and quality teams to address field defects or recurring issues. Capture field data, photos, measurements, and feedback for engineering review and continuous improvement. Provide hands-on support during field trials, pilot builds, or validation testing. Process Control & Continuous Improvement Identify opportunities to improve mechanical reliability, process capability, and product quality. Suggest design-for-manufacturability improvements based on production and field learnings. Participate in Lean, Kaizen, 5S, and continuous improvement activities. Assist in creating or updating work instructions, inspection criteria, and equipment setup procedures. Qualifications Technical degree or certification in Mechanical Engineering Technology, Mechatronics, Industrial Maintenance, or equivalent experience. 3-7 years in a manufacturing, mechanical, or quality technician role; consumer tech or electronics environment preferred. Strong mechanical troubleshooting skills with experience in pneumatics, hydraulics, tooling, and fixtures. Proficient with precision measurement tools (calipers, micrometers, gauges, torque tools, CMM). Understanding of GD&T, engineering drawings, and mechanical tolerances. Familiarity with quality systems such as ISO 9001, IATF 16949, or similar. Ability to travel occasionally for field investigations (5-20%). Strong communication skills, including documenting findings clearly and accurately. Key Competencies Mechanical aptitude with a strong quality mindset Analytical and detail-oriented Effective communicator in both production and field environments Root cause problem-solving Strong teamwork across Quality, Engineering, and Operations Safety-focused and disciplined in documentation Adaptable - able to shift between factory, lab, and field needs All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, physical or mental disability, or covered veteran status.

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Irvine Scientific (dba FUJIFILM Biosciences), we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Irvine Scientific (dba FUJIFILM Biosciences). Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Responsibilities: Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. Suggest changes in departmental procedures and processes (SOPs) as needed. Performs and documents line clearance at the start of each formulation event. Maintains all required logs and associated documentation. Assures that all chemicals are stored and labeled properly. Performs process scale checks on all required equipment including scales and balances. Keeps work area, utensils, tanks, mills, and equipment clean and organized. Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. Understands and follows procedures to ensure that chemicals are handled properly. Good understanding of metric system and its conversions. Follows and actively participates in sustaining the 6S program in the area. Other duties as requested by Lead or Supervisor. Required Skills/Education: High School Diploma or equivalent. Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. 1-2 years of hands on experience General education about chemicals and proper handling (college level science preferred). Working knowledge of metric system. Good understanding of current Good Manufacturing Practices (cGMPs). Ability to speak, read, and write English. Good oral and written communication skills. Salary and Benefits: For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). Medical, Dental, Vision Life Insurance 401k Paid Time Off *#LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*******************).

Responsibilities: Conducts examinations and quality control inspections on products, materials and components at various stages of the production process to ensure compliance with established quality and reliability standards. Participates in analysis statistical data from processes to either confirm compliance with established standards or identify deviations from standards Performs routine visual inspection of soldered connections, mechanical inspections of electronic and electro-mechanical assemblies and subassemblies. Participates in preparing all necessary documentation for reporting acceptance/rejection of inspected and/or tested items. Qualifications: Ability to follow detailed job instructions. Able to apply a systematic Quality Assurance approach while using existing procedures to solve standard problems. Skilled at measuring and using test equipment as prescribed by job assignment. Capable of identifying and independently resolving routine issues. Experience with blueprints, drawings and parts lists. Familiar with the casting, forging, molding, stainless-steel and electronic components use in Aerospace industry. Education & Experience: Education: High School Diploma/Equivalent and work experience that will allow successful performance of job expectations. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 2-5 years of relevant experience Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

This role is designed for Second Shift. The Quality Technician II supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. Position Responsibilities Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks. Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database. Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers. Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms. Support DCMA Source Inspection process Coordinates with Shipping and Contracts department as needed to ensure timely delivery. Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection. Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system. Develops and maintains process instructions for quality-related activities Works on assignments that are semi-routine in nature Other duties as assigned Basic Qualifications (Required Skills & Experience) High School Diploma or GED equivalent 1 - 2 years of related work experience or equivalent combination of education, training, and experience Demonstrated expertise in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 Basic knowledge of FAI validation and verification process requirements Strong computer skills and is proficient in MS Office Suite (Word, Access, PowerPoint, Excel) Basic knowledge of engineering drawings and specification systems Must be able to fill out the necessary flight test documentation Must be able to properly document any/all non-conformances encountered Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components. Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results Must able to work efficiently in a fast-paced, high-volume environment Required to travel to and from remote flying sites on a daily basis Must have a valid California driver's license and clean driving record Willingness to work overtime also a must Other Qualifications & Desired Competencies 2 year technical degree desired; Quality system courses and/or equivalent experience preferred Aerospace quality management system experience (AS9100DD) and/or internal audit experience is preferred Solid ability to accurately record and manage data, records, files and other documents to support tasks Has an analytical approach to problem solving and high organizational skills as well as effective time management, interpersonal and communication skills Strong ability to manage time and prioritize tasks Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Job Description Ruggable is a leading direct-to-consumer e-commerce brand based in Los Angeles, California with an extraordinary track record of high, profitable growth. We pride ourselves on having an extremely loyal customer base and a talented team made up of genuinely caring people who take action and deliver results. We are venture-backed and own a patented washable rug design that's disrupting the home décor industry. Our mission is to empower our customers to live vibrantly with beautiful products that don't compromise on function. If you're passionate about consumer products, e-commerce, and high-growth start-ups, keep reading! Please note, this role is onsite five days a week, Monday through Friday, 7-4 or 8-5 pm. Job Summary: We are seeking a Quality Technician to support our daily manufacturing operations. This role helps ensure every product meets our quality standards by supporting the systems that keep our output consistent for customers. The Quality Technician will work closely with on-site Quality, Production, and Engineering teams to identify issues, assist with corrective actions, and reduce variation in our processes. This position plays a key role in maintaining reliable, repeatable production and ensuring compliance with both customer and internal standards. What You'll Do: Perform routine quality checks, measurements, and visual inspections to ensure products create exceptional experiences for our customers Support on-site manufacturing quality process control activities and maintain accurate documentation Assist in maintaining quality records, equipment logs, and inspection documentation to support consistent production and compliance Work directly with local Production, QA, and Engineering teams to provide data and observations during root cause analysis (RCA/CAPA) efforts Monitor visual and dimensional product characteristics, especially color consistency, and promptly communicate discrepancies to supervisors Collect, organize, and report quality and process data for trend analysis and continuous improvement What You'll Need to Have: Required: Associate degree in a technical field or equivalent hands-on experience in quality 0-1 years of experience in a production, quality, or manufacturing support role Working knowledge of basic quality tools (control charts, check sheets, 5 Whys, basic FMEA concepts) Ability to perform accurate measurements, visual inspections, and data collection Proficiency with Google Sheets/Excel and basic data analysis techniques Strong attention to detail, communication, and teamwork skills Comfortable working in a fast-paced manufacturing environment Preferred: Experience with visually critical characteristics such as color consistency Exposure to quality audits, feedback loops, or process verification activities Familiarity with ISO standards or retail/consumer product compliance Experience in wholesale, retail, or direct-to-consumer manufacturing environments' Compensation: $69,000-80,000 annual salary range (depending on location and experience) An annual bonus percentage that varies based on level of role Employer matching (up to 3% of base salary) for company sponsored 401k plan At Ruggable, we offer competitive compensation and benefits packages. Ruggable is an Equal Employment Opportunity employer. We proudly recruit and hire a diverse workforce and are committed to creating an inclusive environment for all employees. If you are based in California, we encourage you to read this important information for California residents linked here. To all recruitment agencies: Ruggable does not accept unsolicited agency resumes. Please do not forward resumes to our jobs alias, Ruggable employees or any other company destination. Ruggable is not responsible for any fees related to unsolicited resumes.

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview As a Quality Technician, GA/Chassis, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: Inspection and Testing: Conduct detailed inspections of automotive components and finished products to ensure compliance with quality standards and specifications Quality Control: Implement and maintain quality control processes throughout the production cycle Continuous Improvement: Actively participate in root cause analysis and corrective action initiatives to address quality issues and prevent recurrence Collaboration: Work closely with production teams, engineers, and other stakeholders to communicate quality standards and expectations Training and Development: Provide training to production staff on quality control procedures and best practices Who You Are: High school diploma required (College degree or equivalent preferred but not required) 2 or more years of experience in a Manufacturing, Quality, or Process focused role Strong mechanical aptitude and trouble-shooting skills Excellent attention to detail and analytical skills Effective communication and collaboration skills Strong understanding of chassis or automotive assembly is preferred California Pay Range $25-$32 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

The Quality Engineer Associate supports the Quality team in achieving Summit's goal of Perfect Quality by assisting in the monitoring, documentation, and improvement of quality systems and processes. This role works closely with operations, manufacturing, and engineering teams to ensure products meet internal and customer expectations, as well as IPC standards for printed circuit boards. Ideal for a candidate beginning their career in quality engineering or manufacturing, this position offers the opportunity to develop hands-on skills in quality systems, inspection, data analysis, and continuous improvement within a high-tech manufacturing environment. The goal is to develop into a full Quality Engineer. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: In-Process Quality Support Learn and conduct in-process inspections, quality checks, and test data collection Maintain accurate documentation for quality records, logs, and forms Support the calibration system and assist with calibration tracking Help monitor process performance using basic data collection and analysis tools Participate in internal audits and prepare data or records as needed Documentation and Reporting Assist in maintaining document control procedures Support the generation of quality reports, charts, and metrics Help track nonconforming material and participate in root cause analysis Input and track Corrective Action Requests (CARs) and Supplier CARs (SCARs) Process Improvement Support Quality Engineers in continuous improvement activities Help identify opportunities for reducing defects and improving yields through performing data analysis and area assessments. Assist with implementation and monitoring of statistical process control (SPC) where needed Customer and Supplier Support Support customer quality surveys, tours, or audits as needed Assist with returned material analysis and simple failure analysis tasks Coordinate with outside test or lab services to support inspection processes 2. Goals Continuously provide assessments and work collaboratively to support improved process controls and yields. Develop measurement parameters to track progress. Work both individually and as part of a cross-functional team to support timely customer deliverables and inquiries. Education/Experience: Required: Associate's or Bachelor's degree in Engineering, Industrial Technology, or related field - or equivalent experience in a manufacturing/quality environment Basic understanding of quality principles and manufacturing processes Proficient in Microsoft Excel, Word, and PowerPoint Strong attention to detail and organizational skills Willingness to learn technical standards (e.g., IPC) and quality systems Interest in working in a hands-on capacity with tools in the laboratory and manufacturing areas, as well as, in performing data analysis. Ability to communicate clearly and work collaboratively across departments Preferred: Prior internship or experience in a quality, manufacturing, or engineering role Familiarity with inspection tools (calipers, micrometers, gauges, etc.) Exposure to ISO 9001 or similar quality management systems Understanding of SPC, basic statistics, or root cause analysis tools (5 Whys, Ishikawa) Physical Demands: Employee may lift and/or move up to 25 lbs as required to perform duties. Excellent concentration and must be able to remain focused in a dynamic fast-paced environment. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic