Quality control technician jobs in Roseville, CA - 115 jobs

Hourly / Non-Exempt / Full Time Salary Range: $23.86 - $37.71/hr Salary depends on Job Classification and location City Rise Traffic We are a well-established and growing company offering a competitive salary and a great benefits package for the right candidate. We service all of California from multiple locations. At City Rise Traffic, we provide high-quality traffic control safety services to construction sites, such as flagging traffic through a work site, lane closures to divert traffic, or detouring traffic to reduce traffic congestion and prevent accidents. We serve the needs of varied industries and are focused on maintaining a safe work environment for construction crews, our employees, and the public. Our focus is safety, so our customers can focus on their jobs. Brief Position Summary: A Traffic Control Associate is responsible for helping manage traffic around active work zones for road construction and utility crews. They use a paddle with "Stop" on one side and "Slow" on the other to signal drivers to slow down, stop, or proceed through the area. Often working alongside a crew leader and other technicians, they coordinate traffic flow through communication, either via two-way radios or hand signals. In some cases, they may set up barricades, cones, vehicle placements, and other devices along the roadway to enhance safety. A Traffic Control Technician must possess a valid California Driver's License with a clean driving record. Their primary responsibility is to ensure the safety of motorists, pedestrians, cyclists, workers, and themselves while on the road. Essential Functions: Maintain a consistent and unrelenting focus on safety throughout all job functions Use traffic signals/signs, traffic plans, and customer requests to safely coordinate traffic flow around the work zone Assist in managing day-to-day work zone set up, maintenance and tear down. Meeting or exceeding customer, state, federal regulations and company expectations Communicate with customers, the public, and with other team members Keep equipment in trucks well organized and in working order Develop superior knowledge of work zone setup and Professional Flagging responsibilities Provide the highest level of customer service to all customers. This includes on-time arrival and well managed work zones Recognize dangers using hearing and vision Handle stressful situations and take safe action to avoid serious injuries to any pedestrians, vehicles, customers, and employees Follow company and state guidelines for effective, safe well managed work zones Drive company trucks as needed Other duties not listed may apply Journeyman Traffic Control Technician Union Requirements: Current LIUNA membership with journey person classification required If extensive non-union experience, City Rise may be able to help facilitate member onboarding if candidate is not already an exist member. Apprentice Union Requirements: Current LIUNA membership with Apprentice 1-4 classification preferred City Rise may be able to facilitate member onboarding if candidate is not already an exist member. Job Qualifications: Can establish and maintain effective working relationships with coworkers and others Can work independently with minimum supervision Strong interpersonal skills and professional demeanor Work in high-volume outdoor locations with multiple interruptions throughout the day Conflict resolution techniques Good customer service skills Multitasking, problem solving, and organizational skills Basic computer skills required Flexible Schedule Knowledge of the Caltrans MUTCD preferred but not required Can read and understand traffic control plans and permits preferred but not required Valid CA driver's license with a clean driving record/insurable Experience driving medium duty vehicles and towing trailers Bilingual in English/Spanish a plus but not required Education: High School Diploma preferred Minimum of 2 years' experience in a similar role preferred Valid ATSSA Flagging certification. Company willing to certify in-house Physical Demands: Lift, carry and place traffic cones to ensure the safety of the work zone. Lifting may be up to 50 lbs Use hands to handle, feel or reach with arms to talk Sit, stoop or kneel Lift, carry, pull, or place and assemble traffic control signs in the proper order to manage work zone traffic Standing/walking for long periods while flagging, in various weather conditions and different times of day/night Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Language Skills: Ability to read and comprehend instructions, correspondence, and memos. Ability to write clear instructions, explanations, and correspondence. Ability to read, understand, and implement TCPs and follow industry guidelines. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Equal Employment Opportunity and Non-Discrimination: City Rise Traffic adheres to providing equal employment opportunity and affirmative action. City Rise Traffic does not discriminate on the basis of race, color, creed, religion, national or ethnic origin, sex, gender, age, sexual orientation, marital status, pregnancy, disability, medical condition, or veteran status. Employment is contingent upon new employees verifying legal permission to work in the United States, successfully passing criminal and drug test.

Anders Group is seeking a travel Cath Lab Technologist for a travel job in Marysville, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Duration: 13 weeks 40 hours per week Shift: 8 hours, flexible Employment Type: Travel Anders Group Job ID #985013. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Tech About Anders Group WHY ANDERS? Anders Group is a Joint Commission accredited staffing agency and stands out from other agencies by our commitment to making sure our travelers are given the best customer service. Our team works hard to find the best jobs with the most aggressive rates! Anders Group offers rewarding assignments and competitive compensation packages, nationwide! We offer the following benefits from day one: Health Insurance, Including a Buy-up Option Dental Insurance Vision Insurance Life Insurance 401(k) Licensure Reimbursement Premium Pay Packages CEU Reimbursements Daily Per Diems Travel Reimbursements Rental Car Allowances Continuing Education Resources Referral Bonus And Many More! THE ANDERS DIFFERENCE You're committed to providing exceptional healthcare. We're committed to you. Anders Group was founded by a team of healthcare recruiters who had built strong relationships with healthcare facilities and professionals nationwide. As staffing firms shifted their focus to numbers and margins, these recruiters saw a need for a company to take a different approach to staffing. Anders Group was founded in 2010 to do just that. We focus on individual and facility goals to make quality placements. Great people working with great facilities make for the best placements. Through our focus on providing the best experience to Allied and Nursing health care professionals, Anders Group has grown to be a top staffing firm in Healthcare. We look forward to working with you! Benefits Medical benefits Dental benefits Vision benefits Life insurance 401k retirement plan License and certification reimbursement Continuing Education Referral bonus

The position is for a local contract Cath Lab Technologist specializing in cardiac catheterization procedures, working 40 hours per week for a 13-week term in Lodi, California. The role involves allied health professional duties with a day shift schedule and offers a competitive pay package along with comprehensive benefits such as medical, dental, vision, 401K, housing support, and continuing education. Host Healthcare supports travel healthcare professionals by providing ease in job placement, premium benefits, and continuous support throughout assignments. Host Healthcare is seeking a local contract Cath Lab Technologist for a local contract job in Lodi, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Local Contract Host Healthcare Job ID #La1fVJ000006tIwvYAE. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Tech - Cardiac Cath Lab About Host Healthcare At Host Healthcare, we provide a truly comfortable experience as you explore your travel nursing, therapy, or allied career. We make your travel healthcare journey easy by taking care of all the details, so you don't have to. We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what's important to you. During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more. We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment. Travel comfortably with Host Healthcare. Benefits Referral bonus School loan reimbursement Vision benefits Wellness and fitness programs Company provided housing options License and certification reimbursement Life insurance Medical benefits Mileage reimbursement Pet insurance Discount program Employee assistance programs Guaranteed Hours Health savings account Holiday Pay 401k retirement plan Continuing Education Dental benefits Keywords: Cath Lab Technologist, Cardiac Catheterization, Allied Health Professional, Travel Healthcare, Medical Technologist Contract, Healthcare Staffing, Hospital Technologist, Medical Benefits, Contract Healthcare Jobs, Healthcare Travel Nursing

The Travel Cath Lab Technologist provides technical support during cardiac catheterization procedures, assisting cardiologists by preparing equipment and ensuring patient care quality in a critical care setting. This travel role involves 40-hour weeks over a 13-week contract, offering competitive weekly pay, housing allowances, and comprehensive benefits. The position requires current licensing, specialty certifications, and preferably two years of Cath Lab experience. MedPro Healthcare Allied Staffing is seeking a travel Cath Lab Technologist for a travel job in Lodi, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Cath Lab Technologist for a contract with one of our top healthcare clients. Requirements Current License in good standing Appropriate specialty certifications/credentials Two years of Cath Lab experience preferred, ideally in a critical care setting. Benefits Weekly pay and direct deposit Full coverage of all credentialing fees Private housing or housing allowance Group Health insurance for you and your family Company-paid life and disability insurance Travel reimbursement 401(k) matching Unlimited Referral Bonuses up to $1,000 Duties Responsibilities The primary responsibility of the Cath Lab Tech is to provide assistance with patient care in the cardiac catheterization lab (CCL) through the provision of technical assistance to the cardiac catheterization team. Provides direct, safe, competent and quality patient care in the Interventional Cardiology department. Assists in the performance of various invasive cardiac or peripheral vascular diagnostic and therapeutic procedures. Sustains a high level of patient care by communication with the patients, families, and physicians and co-works to address the physical, general and psychosocial needs of the patient. Functions under the direction and immediate supervision of the cardiologist/radiologist performing the procedure. Assists cardiologist during procedures by operating ancillary equipment, anticipating and obtaining catheters, wires and other necessary inventory and medications as ordered. Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines. Delivers quality, cost-effective patient care in a professional manner. Works effectively to maintain an environment of excellence, which is patient-focused, providing timely, compassionate, quality patient care. Promotes and maintains a safe work environment for both staff and customers, incorporating national patient safety initiatives. Prepare and update patient records accurately and legibly. About Agency MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Cath Lab Technologist, EKG Tech, Electrocardiograph Tech *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0FcxqNyEAI. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Technologist Cath Lab: Cath Lab Technologist. About MedPro Healthcare Allied Staffing No One Cares More for Caregivers Than MedPro. Focus on your patients, we'll take care of the rest. MedPro Healthcare Staffing is a Joint Commission certified provider of temporary and contract staffing services. Since 1983, we have placed happy nursing and allied travelers in top healthcare facilities nationwide. You deserve a travel experience that's rewarding and memorable. One that allows you to DREAM big. EXPLORE often. And ACHIEVE greatness. The MedPro Experience delivers it! Access to nationwide travel assignments Weekly pay and direct deposit Full coverage of all credentialing fees Private housing or housing allowance Group Health insurance for you and your family Tax Free Per Diems, Housing Stipends and Travel Reimbursements Company-paid life and disability insurance Travel reimbursement Access to our Clinical Nurse Liaison Team 401(k) matching Unlimited Referral Bonuses starting at $500 Benefits Weekly pay Employee assistance programs Referral bonus Keywords: Cath Lab Technologist, Cardiac Catheterization, Interventional Cardiology, Travel Healthcare Jobs, Cardiovascular Technician, Healthcare Staffing, Allied Health Professional, Medical Technician Travel Jobs, Patient Care, Invasive Cardiology Procedures

Travel Cath Lab Technologist - $3,216 per week at National Staffing Solutions-Surgical Services summary: This position is for a travel Cath Lab Technologist working 40 hours per week with rotating 8-hour shifts for a 13-week assignment in Lodi, California. The role involves providing specialized allied health services in a catheterization laboratory while traveling to healthcare facilities in need. National Staffing Solutions facilitates these placements, offering competitive pay and opportunities for professional growth nationwide. National Staffing Solutions-Surgical Services is seeking a travel Cath Lab Technologist for a travel job in Lodi, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 8 hours, rotating Employment Type: Travel National Staffing Solutions-Surgical Services Job ID #. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About National Staffing Solutions-Surgical Services National Staffing Solutions is a leader in the travel healthcare industry for over a decade. National Staffing Solutions places healthcare professionals in positions that allow them to gain valuable experiences, fill the skyrocketing demand in their field, and travel nationwide at premium pay. We use our insight, experience and nationwide resources to make exceptional connections every day! Through our many years of service, we are now positioned perfectly to pass your name and resume to our healthcare partners that are looking for YOUR help. Facilities across the nation choose National Staffing Solutions as their workforce partner to solve nursing shortages that range from quick-fill demands to areas in urgent need of medical attention. Hundreds of healthcare organizations throughout North America rely on us each year to connect them with quality professionals, like yourself, who are ready to work. Keywords: Cath Lab Technologist, Travel Healthcare Jobs, Cardiovascular Technician, Travel Medical Technologist, Allied Health Professional, Catheterization Lab, Healthcare Staffing, Medical Travel Jobs, Temporary Healthcare Position, Rotating Shifts

**Production Technician I - Sacramento, CA** The Production Technician I is responsible for operating and monitoring production machinery to maximize production and maintain KDP's high standards in safety and quality. This role will also be engaged in supporting improvements to the manufacturing process in the areas of safety, quality, delivery, productivity and growth. **Shift and Schedule:** This is a full time position with shifts below available: + **1st shift: Monday - Friday, from 6:00am - 2:30pm** + **2nd shift: Tuesday - Saturday, from 2:15pm - 10:45pm** + **3rd shift: Monday - Friday, from 10:30pm - 7:00am** Flexibility to work overtime, weekends, and holidays is required as scheduled. **Position Responsibilities:** + Maintain a safe and healthy environment, demonstrating safe behaviors at all times. + Understand and help drive improvement to quality systems and policies (Quality Data System, Safe Quality Food, Good Manufacturing Practices and Hazard Analysis Critical Control Points). + Learn to safely operate and monitor high-speed production equipment. + Actively engage in resolving production line issues, executing and developing standard work, tracking production data, and participating in KDP's lean daily management process. + Actively learn and participate in formal problem-solving processes with team members. + Generate productivity and continuous improvement ideas. + Demonstrate KDP values of Team First, Deliver Big, Think Bold, Being Fearless and Fair. **Qualifications:** + Ability to quickly learn about how processing and packaging equipment works. Mechanical understanding or manufacturing experience preferred. + Self-motivated team player with ability to make decisions, communicate and problem solve. + Comfort with basic computer functions and ability to quickly learn production software. + Basic mathematical skills to make production calculations **Total Rewards:** + Pay starting at **$24.81 per hour plus a $0.35 shift differential** **Where Applicable:** + Benefits eligible day one!! + Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement **Requirements:** + Ability to lift up to 35 pounds and 50 pounds occasionally. + Ability to bend, stretch and stand during entire shift. + Ability to frequently kneel, squat, climb stairs/ladders, bend, stoop, twist, and reach overhead with repetitive motions. + Ability to work in a variety of temperature and humidity conditions. **Company Overview:** Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partners brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, **A.I. Disclosure:** KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to **************** . Keurig Dr Pepper is an equal opportunity employer and affirmatively seeks diversity in its workforce. Keurig Dr Pepper recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law.

Performs any combination of the essential duties and responsibilities of quality control at manufacturing facility in Dixon, CA. Successful candidates will be required to participate in a pre-employment drug screen and random drug screening per our Drug Free Workplace policy. Dependability for work schedule is crucial. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Inspects cast floats, float assemblies, and metal fabrications, hardware components, and lumber; * Inspects the casting process per drawing requirements; * Performs concrete tests per ACI / PCI and customer specifications; * Scans production and inspection documents; * Conducts safety tasks and inspections as required by The BMI Safety Program; and * Documents and records QC activities. * Performs other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or equivalent required. Requires knowledge of or ability to learn the characteristics of concrete float fabrication with 12 months of experience working with concrete and/or prior inspection. Requires one year of experience in Quality Control. CERTIFICATES, LICENSES, REGISTRATIONS: ACI concrete field testing tech Grade 1 Certification. Possess or ability to obtain PCI Quality Control Technician Levels 1 and 2 within 12months of hire. Ability to read production drawings. COMPUTER SKILLS: To perform this job successfully, an individual should be proficient with MS Word, MS Excel, and MS Outlook. Must be able to use a document scanner.

Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $4 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's -Infinite Possibilities. One Family. Purpose Statement The full-time position is scheduled for Monday through Friday, 4:00 PM to 12:30 AM. Performs the activities related to microbiological, analytical, performance and sensory evaluation using established methods and procedures. Understands, trains in and enforces SQF Global Standards for Food Safety including but not limited to formula control, data integrity, HACCP, GMPs, process monitoring, communication, document control, customer specifications, regulatory, quality and reliability standards Key Accountabilities and Outcomes Observe processes and work closely with plant personnel and corporate R&D to develop and maintain detailed and accurate plant floor work instructions for formulas and product specifications. Verifies that process controls, weight control, HACCP and finished product specifications are adhered to by regularly auditing procedures and paperwork daily. Assist R&D personnel to test and commercialize new products or changes to existing products, collect and send process data and product samples. Demonstrate high moral character and ethics. Adheres to company codes of conduct and does not engage in gossip or workplace drama. Initiates holds of ingredients or finished products that do not meet Rich's product safety or quality requirements. Keeps informed of latest manufacturing technologies, systems, and quality control practices. Maintains a comprehensive understanding of all products manufactured by the plant as well as the raw materials, packaging materials, and operations required in the manufacturing process including quality specifications and standards. Participates in QA/TPM meetings to discuss quality and sanitation issues and opportunities for continuous improvement. Participate in documentation of SQF element reviews. Assembles, reviews and files daily production paperwork. Act as backup to Quality Floor Technician for vacation and weekend coverage on a regular basis. Knowledge, Skills, and Experience Degree in Biology, Food Science, Food Technology or related field; or five plus years' quality assurance experience in a food processing, pharmaceutical or chemical manufacturing industry; or a combination in experience and education Demonstrated knowledge and application of quality assurance techniques and tools and quality management principles in a food manufacturing environment. Demonstrated knowledge of efficient and safe manufacturing operations to include GMPs, HACCP, product and associate safety, and product quality. Demonstrated ability to train associates as well as plan, monitor and schedule tasks and projects Demonstrated ability to analyze and resolve problems. Demonstrated ability to formulate and understand basic statistical analysis. Proficient and learning capability in using Microsoft Word, Excel, Outlook, Minitab, and SAP. Willingness to work weekends and overtime when required. Capable of being certified in HACCP, PCQI, and as an SQF Practitioner. COMPENSATION In accordance with state law, the rate or range provided is Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), reasonable estimate of the base compensation for this role. The actual amount may be higher or lower, based on non-discriminatory factors such as experience, knowledge, skills, abilities, shift differential, and location. Hourly Rate $31.60 - $31.60 plus shift differential as applicable Rich Products Corporation, its subsidiaries and affiliates (“Rich's”), are committed to a policy of Equal Employment Opportunity, standing up for fairness and maintaining a culture of belonging, to provide an exceptional experience for all. We will not discriminate against an applicant or employee on the basis of race, color, religion, sex, national origin, disability, military or veteran status, or any other Federal or State legally protected classes. The information collected by this application is solely to determine suitability for employment, verify identity, and maintain employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Rich's. Please contact Rich's Associate Experience Network at *************** if you need assistance completing this application or to otherwise participate in the application process.

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. The Senior Nuclear QA/QC technician provides inspection, testing and evaluation services for our nuclear fleet. This role also develops NDE techniques and procedures as applicable. This position is based at Davis-Besse Nuclear Power Plant. Job Description Key Roles & Responsibilities Required understanding of Mechanical; electrical and I&C work activities Directly evaluate performance of work performed against Nuclear Fleet and industry standards to determine compliance Understanding of materials, material properties, and failure modes Working knowledge of ASME Codes Section II, III, V, IX, and XI Perform inspections of work being performed in support of nuclear fleet (Davis-Besse) Perform and evaluate test results for dedication/acceptance of parts/materials Observe and monitor work activities Perform document reviews for compliance with specification/code/regulatory requirements Capable of being certified in NDE techniques (i.e. MT;PT;UT;RT;ET;VT) Capable of using of precision measuring equipment (e.g. calibers, micrometers) Must be able to read and understand construction drawings Must be knowledgeable in Nuclear construction codes and standards Knowledgeable in material specifications Education, Experience, & Skill Requirements Education as required by regulatory agencies; minimum High school diploma or GED 8 years nuclear plant experience; 4 in the area of QC inspection or NDE Technical understanding of multiple nuclear plant processes / programs Key Metrics Technical competence Teamwork Problem solving/Decision making Results Orientation ** Final pay grade will be based on applicant's experience and qualifications ** Job Family Plant Operations Company Vistra Nuclear Operations Company Locations Oak Harbor, OhioOhio We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today! If you currently work for Vistra or its subsidiaries, please apply via the internal career site. It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws. If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.

Job Description Benefits: Medical, Vision, Dental, 401K, Life Insurance, Health Savings Account, Costco Membership Reimbursement and 40% off Employee Discount Here at San Francisco Bay Coffee, our mission is to cultivate unrivaled quality, strong partnerships and sustainable practices by pouring our hearts into every cup. Come join us in making San Francisco Bay Coffee the most loved coffee in the world! About San Francisco Bay Coffee: Established in 1979, San Francisco Bay Coffee operates as a family-owned coffee company in its third generation focused on innovation and sustainability. San Francisco Bay Coffee has an international network of over 32,000 farmers and treats all its suppliers as extended members of the family. They offer a variety of coffee products sourced from farms worldwide, including OneCUP and a range of bag sizes, all at various roast levels. The brand also sells coffee related merchandise. San Francisco Bay Coffee sells via the following channels: club, regional and national grocery stores, and online. San Francisco Bay Coffee is committed to sustainable and eco-friendly farming and production. The San Francisco Bay Coffee family has maintained a tradition of quality and exceptional service since their inception. They have cemented their reputation as experts in the coffee world by spearheading innovation to create a high quality and affordable coffee product. Job Summary: The job of Quality Assurance Technician I is a highly focused position to ensure that the products manufactured fit the organization's purpose, any and all legal requirements, meets specifications and customer expectations. The QA Technician I documents the products test results and provides suggestions required to attain the best quality product possible. Responsibilities: Comply with Federal, State, Governmental and or any other appropriate regulatory laws or guidelines Ensure standards are met in the areas of Food Safety and Product Quality Proficiency in performing the tests and inspections required for One Cup and Traditional Packaging of coffee products One Cup and Traditional Packaging of coffee products All analytical testing Primary and secondary material verification Ingredient and finished product testing Code verification Sampling collection Report all non-conformances to Quality Management Team Perform any special assignments as required by the QA Supervisor, Quality Manager, SQF Practitioner and/or QA Lead Work in a safe manner, following all safety rules and procedures Support, follow and train in Food Safety Culture Comply with all company policies and procedures, demonstrating a strong commitment to Food Safety and Good Manufacturing Practices (GMP) in support of product integrity, operational excellence, and regulatory compliance Education and Experience: High school diploma or GED equivalent Manufacturing environment Requirements: Basic math concepts Good interpretive and/or reactive skills Location: Onsite-Lincon, CA Schedule: Mon-Fri 12:30pm-9:00pm **Some weekends** Pay: $23.00 per hour Job Type: Full-time SF Bay Coffee offers their employees full benefits: Medical, Vision, Dental, 401K, Life Insurance, Health Savings Account, 40% off Employee Discount and Costco Membership Renewal EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. Fair Chance Act San Francisco Bay Coffee will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if San Francisco Bay Coffee is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting the Civil Right's Department Fair Chance Act | CRD (ca.gov) webpage.

Quality Control Technician: Sauna Want to join one of the hottest health and wellness startups in the country? Well, PLUNGE is looking for just the right person to take our team to the next level. Overview of Role The role will report to Quality Management and support all production and warehouse processes. This role will be involved in a variety of manufacturing, testing, kitting, and packaging operations in a dynamic and proactive work environment. This position will become an active part of a quickly growing team! This role will be located at our Lincoln, CA location. Key Responsibilities Inspect pre-cut/pre-assembled in coming raw materials (beams, frames, electrical wire, wood moisture content). Inspect individual sauna pieces during build for dimensional accuracy and aesthetic flaws. Test electronic heaters and lights for the sauna. Inspect completed sauna and verify that the fit and finish of all pieces together align with our quality standard. Inspect the crated sauna and verify all pieces are included, undamaged, and placed properly to prevent damage during shipment. Document wood shop products (saunas, showers, shipping crates) with photographs. Our Ideal Candidate Experience with woodworking and carpentry processes High attention to detail Experience working with a variety of different teams and departments Experience working in Quality or Manufacturing Operations Proposes new ideas and thoroughly investigates issues Proactively embraces changes and promotes continuous improvement Benefits, Perks, Time Off Comprehensive health insurance: Medical, dental, and vision. Shared cost. Life/ADD, STD, and LTD benefits. 401K plans with a 3% match after 6 months. Perks 1 free monthly float at Capical FLoats in Sacramento or Auburn Health reimbursement for gym, supplements or other health expenses Get Paid to Plunge bonus Monthly catered lunches with live DJ and raffle prizes. Reimbursement for participating in the Landmark Forum. *Conditions apply.

More than one million people in the United States today are fighting blood cancer. While a traditional allogeneic stem cell transplant has been the best hope for many, the transplant itself can prove fatal or lead to serious conditions, such as graft vs. host disease. Orca Bio is a late-stage biotechnology company redefining the transplant process by developing next-generation cell therapies with the goal of providing significantly better survival rates with dramatically fewer risks. With our purified, high-precision investigational cell therapies we hope to not only replace patients' blood and immune systems with healthy ones, but also restore their lives. We operate a dedicated clinical manufacturing facility in Sacramento, CA (3400 Business Drive), which has historically served as the foundation for producing our high-precision cell therapy products. This site plays a critical role in advancing our clinical pipeline and ensuring the consistent, reliable supply of therapies for patients participating in our trials. The QC Environmental Monitoring Technician is a crucial role in maintaining the integrity and safety of our cell therapy products, conducting routine and non-routine testing to ensure the environmental conditions in our cell therapy manufacturing facility meet the highest quality standards. The incumbent performs testing according to established operating procedures. Conducts routine environmental monitoring activities in the cell therapy manufacturing facility, including air and surface monitoring, to ensure compliance with regulatory requirements. Collects samples from critical areas within the manufacturing facility according to established procedures. Maintains and calibrates environmental monitoring equipment regularly to ensure accuracy and reliability of measurements. Maintains accurate and up-to-date records of environmental monitoring activities, including sampling plans, results, and corrective actions taken. Environmental analyses, including microbial and particulate matter testing. Performs basic lab functions like reagent preparation. Physical Demands * Production Associates: Must have visual acuity of 20/20 (corrected or uncorrected) and normal color vision to safely perform critical tasks such as visual inspection of materials, equipment, and labeling, including distinguishing color-coded components in a GMP environment. * Must be able to meet cleanroom gowning requirements, including wearing full gowning (face coverings, gloves, hoods, goggles) for extended periods, as needed. Use of cosmetics (makeup, painted nails), jewelry, or facial piercings is not permitted in the cleanroom, and any skin conditions that cause shedding must be disclosed. Work Conditions * Must be able to work at either Orca Bio Sacramento location (3400 Business Dr. or 7910 Metro Air Pkwy) based on operational needs. * Must be comfortable regularly participating in video-based meetings. * May be required to work scheduled overtime, weekends, or holidays based on business needs. Essential Duties & Key Responsibilities * Perform a broad variety of basic and moderate complex tests in support of lab operations * Perform testing of routine and non-routine samples and documents according to cGMP * Perform routine lab and equipment maintenance * Troubleshoot and address any equipment issues promptly to minimize downtime * Prepare basic and complex reagents as assigned * Order and maintain lab supply inventory * Aliquot samples as required, including aseptic aliquoting * Receive and provide training * Perform other duties as requested by supervisor/manager to support Quality * Collaborate with cross-functional teams, including manufacturing, quality control, and quality assurance, to address environmental monitoring-related issues and implement corrective actions Minimum Experience, Education, Certifications, Licenses * Prepare basic and complex reagents as assigned * Order and maintain lab supply inventory * Aliquot samples as required, including aseptic aliquoting * Receive and provide training * Participate in assay transfer and assay validation * Perform equipment qualification/maintenance * Identify and support resolution of technical problems * Actively participate in group and project teamwork; project and process improvements * Resolve issues as needed with management approval * Adhere to cGMP policies and procedures, including documentation activities * Perform other duties as requested by supervisor/manager to support Quality * Willingness to work swing and night shifts $23 - $29 an hour The anticipated annual salary range for this job is based on prior experience in the role/industry, education, location, internal equity, and other job-related factors as permitted by law. For remote-based positions, this range may vary based on your local market. You will also be eligible to receive pre-IPO equity, in addition to competitive medical, dental, and vision benefits, flexible PTO, 401(k) plan, life and accidental death and disability coverage, and parental leave benefits. Other perks include free daily lunches and snacks at our on-site locations. Who we are We are driven by a passion for science and compassion for patients. We act with urgency to ensure our treatments are one day accessible to all who need them. We live by our core values of passion, courage, and integrity. Excellence in our work means the chance to unlock a better quality of life for our patients, and with that comes tremendous responsibility. We innovate on a path that hasn't been paved. We embrace an entrepreneurial spirit and take calculated risks to achieve our mission. We aren't afraid to ask "why not" and challenge the status quo. We maintain a start-up culture of camaraderie and leadership by example, regardless of title. We're proud to be an equal opportunity employer, and recognize that celebrating our differences creates stronger, lasting solutions that better serve our team, our patients and their healthcare providers. Notice to staffing firms Orca Bio does not accept resumes from staffing agencies with which we do not have a written agreement and specific engagement for a particular opening. Our employment activities, inquiries and offers are managed through our HR/Talent team, and all candidates are presented through this channel only. We do not accept unsolicited resumes, and we rarely outsource recruitment.

Quality Control Technician needs 2+ years of work experience in a professional, manufacturing, or laboratory setting Quality Control Technician requires: High school diploma or GED 2+ years of work experience in a professional, manufacturing, or laboratory setting Basic math skills Clear and effective oral and written communication with a small team within a large company Ability to work independently and to take directions based on circumstances Computer literacy in Microsoft Office Suite Be able to safely work with chemicals in a laboratory and manufacturing environment Preferred: Associates degree in sciences or some college coursework Knowledge of basic laboratory practices Physical Requirements: Must be able to lift up to 50 lbs. Must be able to stand for long periods of time Quality Control Technician duties: Operate analytical instruments to perform quality control testing of liquid 3D printing resin according to standard, including: o Digital Light Processing (DLP) 3D printing. Color and ultraviolet spectrophotometry. Rheology. ASTM methods D790, D412, D638, D7867 Calculate and report test results using Albert and SAP software for the completion of quality tasks Communicate with product development, engineering, and production personnel to make batch adjustments as needed Use good manufacturing practices to maintain clean working environments such as lab benches, fume hoods, and ovens. Monitor equipment performance by completing routine standards checks Perform incoming inspections of raw materials shipments and property data File, maintain, and appropriately dispose of raw material, quality retain, and finished product inventories Comply with weekly 5S standards including sweeping, mopping, organizing, and trash removal. Ensure end to end sample and product traceability Complete other miscellaneous responsibilities within the Quality Department as assigned by department manager

* Ability to manage Quality on multiple projects * Supervise Quality staff * Train Quality activities and requirements at a divisional level * Assist Division Quality Manager as directed * Lead project team through engagement and processes * Ability to work with and report to senior management * Develop understanding/working knowledge of corporate quality control program, company standards, procedures, and building codes, required to perform assigned work * Develop Water+Min5 plan with project team * Review, comment, and work through Division Quality Manager for approval of trade partner project specific Quality Control Plans * Perform inspections and witness tests applicable to discipline to determine acceptability of work * Maintain work performance records, inspection records and other related items; assure correctness of all documents * Work with Project Manager and Site Superintendent to manage site quality program and assist in providing solutions to non-compliant items * Assist in preparation/implementation of quality control program, including but not limited to; procedures, inspection instructions, the control of measurement and testing equipment * Participate in internal/external quality control audits * Assist in reviewing purchase and submittal documents to ensure compliance with quality control requirements * Assist in resolution of reported project non-conformance issues * Monitor subcontractor work to ensure compliance with company standards, procedures and codes, when applicable * Ensure timely and successful implementation of corrective measures * Assist in and document commissioning processes * Complete other responsibilities as assigned Physical Demands and Environmental Conditions: * Occasional exposure to dust and fumes * Requires frequent stooping/bending/crouching, reaching, handling, finger dexterity, sitting, standing, walking, and lifting 20 or more lbs * Constant finger dexterity and ability to hear, and talk, and possess depth perception * Occasional climbing and carrying * The noise intensity level is moderate SUMMARY OF BENEFITS: This role is eligible for the following benefits: medical, dental, vision, 401(k) with company matching, Employee Stock Ownership Program (ESOP), individual stock ownership, paid vacation, paid sick leave, paid holidays, bereavement leave, employee assistance program, pre-tax flexible spending accounts, basic term life insurance and AD&D, business travel accident insurance, short and long term disability, financial wellness coaching, educational assistance, Care.com membership, ClassPass fitness membership, and DashPass delivery membership. Voluntary benefits include additional term life insurance, long term care insurance, critical illness and accidental injury insurance, pet insurance, legal plan, identity theft protection, and other voluntary benefit options. If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Job DescriptionDescription: The Quality Control Inspector I is responsible for routine (incoming, in-process, first article and final) QC inspection of raw materials, subassemblies and finished product. All receiving, in-process, first article and final inspections are performed in accordance with documented procedures and specifications. The QC Inspector I shall ensure that inspection equipment is properly calibrated, handled and maintained. The QC Inspector I documents inspection results and releases acceptable product for use. The QC Inspector I identifies and segregates nonconforming product/processes for disposition by the Material Review Board. The work schedule for this role is Monday through Friday, 6:00am to 2:30pm DUTIES/RESPONSIBILITIES The Quality Control Inspector I is responsible for performance of the following quality system functions in accordance with documented procedures: Inspection- Performing first article, receiving, in-process and final inspections in accordance with documented procedures. Assisting other personnel with inspection setups and questions. Process Control - Maintain product identification and traceability requirements throughout the inspection processes. Nonconformance Handling - Identification, documentation, evaluation, and segregation of nonconforming product pending review and disposition by the Material Review Board. Statistical Techniques - Employment of the appropriate statistical sampling techniques for inspection by attributes (ANSI/ASQ Z1.4). Requirements: This position requires the following qualifications (at a minimum): Experience performing inspections in a regulated industry such as medical device, automotive, aerospace. Adequate knowledge and understanding of the applicable quality system requirements (ISO 13485:2016, 21 CFR Part 820, etc.); Adequate knowledge and understanding of industry-standards for the sampling (ANSI/ASQ Z1.4) and inspection of product; Excellent organizational and communication skills. The ability to follow directions and interpret engineering and inspection specifications, including GD&T. Experience with a variety of inspection instruments such as calipers, micrometers, go/no-go gauges with Optical Comparators and CMM operation being a plus. Experience with developing open inspection setups on surface plates using height gages, sine plates etc. Experience with the inspection of high polished, tumbled, sand blasted and satin brushed surface finishes is a plus. Good written and verbal communication skills and ability to solve problems. Basic computer skills using Windows operating system. Requires a high school diploma or its equivalent. One or more years of related experience preferred. Essential Functions Typical Working Conditions, Equipment Used, and Essential Physical Tasks: Depending on task assignment, the physical demands described here may be representative of those that must be met by an employee to successfully perform the essential functions of this job. Percentage of time in essential function may depend on assignment of tasks: Walking and standing on hard surface while using instrumentation. Working in a temperature controlled enclosed office area. Sitting for periods of up to 2 hours. Bending, kneeling, squatting, stooping, reaching, pulling, pushing, and lifting up-to 25 lbs. Must be able to stand for long periods of time - up to 50%. Some exposure to loud noises generated from manufacturing equipment. Use of magnification/visual assistance devices for inspection work. Typing using a keyboard and entering information into tracking systems. We offer company holidays, vacation and sick time off, medical, dental, vision, disability and life benefits as well as a 401(k) Plan. Shalby Advanced Technologies, Inc. provides equal employment opportunities to applicants and employees without regard to: age, genetic information/characteristics, marital status, medical condition, mental or physical disability, national origin and ancestry, pregnancy and perceived pregnancy, race and color, religion, sex/gender including pregnancy, breastfeeding, gender identity or gender expression, sexual stereotypes, sexual orientation, reproductive health decision-making and veteran or military status. The expected base salary range for this position is between $21.00-$22.00 per hour and the compensation offered will depend on the candidate's qualifications.

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. **If you are a current associate of Primo Brands, please apply** **here** **Factory Location:** Sacramento, CA **Compensation:** $23.50/hour _This position is_ **_seasonal_** _, with the possibility of direct hire and increased compensation upon transition to a permanent role, contingent on performance and other relevant factors._ **_Seasonal Benefits: Sick time Employee discounts 401K with a 5% match_** Responsibilities + Visually inspect and sign off product quality as it comes of the line during final point of control + Record all necessary activities on Zebra handheld computer accurately + Actively participate in the DOR, taking actions and coaching to gain results for manufacturing excellence + Operate, clean, and service water dispensers and equipment + Packaging parts, loading raw materials, equipment washing, quality control inspections and data recording + Maintain workstation in an organized and clean manner to ensure safety and Good Manufacturing Practices + Interact with production team members, quality control and maintenance technicians to maximize output and efficiency + Safely use and work around various chemicals and follow SOP's accordingly + Assemble, wash and sanitize various units as required using the established procedure + Effectively read and utilize instructional, mechanical, and electrical technical manuals + Capable of using a pneumatic drill and other hand tools + Considerable ability to follow oral and written instructions + Work in wet work areas, ensuring the use of proper chemicals and following all safety protocols + Perform other duties as assigned Qualifications + High School Diploma, GED, or equivalent work experience + Minimum (3) years' experience in related role, prior exposure to manufacturing in the food or beverage industry preferred + Ability to work independently or collaboratively, with strong communication skills + Able to lift and pull 50 lbs. as needed while performing work continuously throughout the shift + Ability to sit, stand, push, pull, climb ladders, walk all day with or without reasonable accommodation + Must be able to do physical inspections of equipment that will require climbing, reaching, and extending arms overhead Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Job Description Quality Control Utility - Arbuckle, CA This is an hourly position Position Summary: This position offers an exciting opportunity for Quality Control in Rough Rice department of Rice Mill. Job Responsibilities: Duties include but are not limited to: Duties include but are not limited to: Protect the product and make sure all quality control checks are being done Cross train and work in all departments Assist in development of SOP's and Work Instructions Train new hires Can work overtime each day Enforcement of all ADM policies and procedures Assist in completing JSA's Must have a demonstrated history of safe work behavior and a sincere desire to follow and improve upon safety policies and procedures. Promotes the ADM Way and Core Values Able to communicate with all levels of the organization All other duties assigned by management Qualifications Ability work under pressure, well with others Good attendance Must have a demonstrated history of safe work behavior and a sincere desire to follow and improve upon safety policies and procedures Basic Computer and Math skills Respectful, positive attitude Strong work ethic Must be self-motivated Must possess excellent leadership, team building, problem solving, time managing, and organizational skills Excellent written and verbal communication Bilingual is a plus Physical Requirements: Walking and/or standing for extended periods of time Working in environments at varying temperatures and noise levels Occasionally lifting, stooping and climbing Available to work occasional weekends and/or holidays as well as during off hours to address emergency conditions or other situations that may arise ADM requires the successful completion of a background check. Base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. Hourly and salaried non-exempt employees will also be paid overtime pay when working qualifying overtime hours. If hired, employees will be in an “at-will position” and the Company reserves the right to modify base pay (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors. The pay for this position is expected to be: $19.00-$21.00

Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $4 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's-Infinite Possibilities. One Family. Purpose Statement The full-time position is scheduled for Monday through Friday, 4:00 PM to 12:30 AM. Performs the activities related to microbiological, analytical, performance and sensory evaluation using established methods and procedures. Understands, trains in and enforces SQF Global Standards for Food Safety including but not limited to formula control, data integrity, HACCP, GMPs, process monitoring, communication, document control, customer specifications, regulatory, quality and reliability standards Key Accountabilities and Outcomes * Observe processes and work closely with plant personnel and corporate R&D to develop and maintain detailed and accurate plant floor work instructions for formulas and product specifications. * Verifies that process controls, weight control, HACCP and finished product specifications are adhered to by regularly auditing procedures and paperwork daily. * Assist R&D personnel to test and commercialize new products or changes to existing products, collect and send process data and product samples. * Demonstrate high moral character and ethics. Adheres to company codes of conduct and does not engage in gossip or workplace drama. * Initiates holds of ingredients or finished products that do not meet Rich's product safety or quality requirements. * Keeps informed of latest manufacturing technologies, systems, and quality control practices. Maintains a comprehensive understanding of all products manufactured by the plant as well as the raw materials, packaging materials, and operations required in the manufacturing process including quality specifications and standards. * Participates in QA/TPM meetings to discuss quality and sanitation issues and opportunities for continuous improvement. * Participate in documentation of SQF element reviews. Assembles, reviews and files daily production paperwork. * Act as backup to Quality Floor Technician for vacation and weekend coverage on a regular basis. Knowledge, Skills, and Experience * Degree in Biology, Food Science, Food Technology or related field; or five plus years' quality assurance experience in a food processing, pharmaceutical or chemical manufacturing industry; or a combination in experience and education * Demonstrated knowledge and application of quality assurance techniques and tools and quality management principles in a food manufacturing environment. * Demonstrated knowledge of efficient and safe manufacturing operations to include GMPs, HACCP, product and associate safety, and product quality. * Demonstrated ability to train associates as well as plan, monitor and schedule tasks and projects * Demonstrated ability to analyze and resolve problems. * Demonstrated ability to formulate and understand basic statistical analysis. * Proficient and learning capability in using Microsoft Word, Excel, Outlook, Minitab, and SAP. * Willingness to work weekends and overtime when required. * Capable of being certified in HACCP, PCQI, and as an SQF Practitioner. COMPENSATION In accordance with state law, the rate or range provided is Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), reasonable estimate of the base compensation for this role. The actual amount may be higher or lower, based on non-discriminatory factors such as experience, knowledge, skills, abilities, shift differential, and location. Hourly Rate $31.60 - $31.60 plus shift differential as applicable Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), are committed to a policy of Equal Employment Opportunity, standing up for fairness and maintaining a culture of belonging, to provide an exceptional experience for all. We will not discriminate against an applicant or employee on the basis of race, color, religion, sex, national origin, disability, military or veteran status, or any other Federal or State legally protected classes. The information collected by this application is solely to determine suitability for employment, verify identity, and maintain employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Rich's. Please contact Rich's Associate Experience Network at *************** if you need assistance completing this application or to otherwise participate in the application process. BRINGING YOUR BEST SELF TO WORK. As a family-owned company, caring for our associates-their whole selves-is a top priority. That's why we provide benefits and tools to help our people balance the integration of work and life: * Competitive compensation * Health & financial benefits * Paid time off * Parental leave * Family planning support * Flexible work policy * Associate resource groups * Volunteering & community impact opportunities * Holiday gatherings * In-house taste tests (we are a food company after all)! It's all part of how we support our family of associates. Because in the company of family, all things are possible. MEET RICH'S. Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $3.8 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's-Infinite Possibilities. One Family. Nearest Major Market: Stockton Job Segment: Document Control, Pharmaceutical Sales, Sales, Administrative

Job DescriptionMore than one million people in the United States today are fighting blood cancer. While a traditional allogeneic stem cell transplant has been the best hope for many, the transplant itself can prove fatal or lead to serious conditions, such as graft vs. host disease. Orca Bio is a late-stage biotechnology company redefining the transplant process by developing next-generation cell therapies with the goal of providing significantly better survival rates with dramatically fewer risks. With our purified, high-precision investigational cell therapies we hope to not only replace patients' blood and immune systems with healthy ones, but also restore their lives. We operate a dedicated clinical manufacturing facility in Sacramento, CA (3400 Business Drive), which has historically served as the foundation for producing our high-precision cell therapy products. This site plays a critical role in advancing our clinical pipeline and ensuring the consistent, reliable supply of therapies for patients participating in our trials. The QC Environmental Monitoring Technician is a crucial role in maintaining the integrity and safety ofour cell therapy products, conducting routine and non-routine testing to ensure the environmentalconditions in our cell therapy manufacturing facility meet the highest quality standards.The incumbent performs testing according to established operating procedures. Conducts routineenvironmental monitoring activities in the cell therapy manufacturing facility, including air and surfacemonitoring, to ensure compliance with regulatory requirements. Collects samples from critical areaswithin the manufacturing facility according to established procedures. Maintains and calibratesenvironmental monitoring equipment regularly to ensure accuracy and reliability of measurements.Maintains accurate and up-to-date records of environmental monitoring activities, including samplingplans, results, and corrective actions taken. Environmental analyses, including microbial and particulatematter testing. Performs basic lab functions like reagent preparation.Physical Demands Production Associates: Must have visual acuity of 20/20 (corrected or uncorrected) and normal color vision to safely perform critical tasks such as visual inspection of materials, equipment, and labeling, including distinguishing color-coded components in a GMP environment. Must be able to meet cleanroom gowning requirements, including wearing full gowning (face coverings, gloves, hoods, goggles) for extended periods, as needed. Use of cosmetics (makeup, painted nails), jewelry, or facial piercings is not permitted in the cleanroom, and any skin conditions that cause shedding must be disclosed. Work Conditions Must be able to work at either Orca Bio Sacramento location (3400 Business Dr. or 7910 Metro Air Pkwy) based on operational needs. Must be comfortable regularly participating in video-based meetings. May be required to work scheduled overtime, weekends, or holidays based on business needs. Essential Duties & Key Responsibilities Perform a broad variety of basic and moderate complex tests in support of lab operations Perform testing of routine and non-routine samples and documents according to cGMP Perform routine lab and equipment maintenance Troubleshoot and address any equipment issues promptly to minimize downtime Prepare basic and complex reagents as assigned Order and maintain lab supply inventory Aliquot samples as required, including aseptic aliquoting Receive and provide training Perform other duties as requested by supervisor/manager to support Quality Collaborate with cross-functional teams, including manufacturing, quality control, and quality assurance, to address environmental monitoring-related issues and implement corrective actions Minimum Experience, Education, Certifications, Licenses Prepare basic and complex reagents as assigned Order and maintain lab supply inventory Aliquot samples as required, including aseptic aliquoting Receive and provide training Participate in assay transfer and assay validation Perform equipment qualification/maintenance Identify and support resolution of technical problems Actively participate in group and project teamwork; project and process improvements Resolve issues as needed with management approval Adhere to cGMP policies and procedures, including documentation activities Perform other duties as requested by supervisor/manager to support Quality Willingness to work swing and night shifts The anticipated annual salary range for this job is based on prior experience in the role/industry, education, location, internal equity, and other job-related factors as permitted by law. For remote-based positions, this range may vary based on your local market. You will also be eligible to receive pre-IPO equity, in addition to competitive medical, dental, and vision benefits, flexible PTO, 401(k) plan, life and accidental death and disability coverage, and parental leave benefits. Other perks include free daily lunches and snacks at our on-site locations. Who we are We are driven by a passion for science and compassion for patients. We act with urgency to ensure our treatments are one day accessible to all who need them. We live by our core values of passion, courage, and integrity. Excellence in our work means the chance to unlock a better quality of life for our patients, and with that comes tremendous responsibility. We innovate on a path that hasn't been paved. We embrace an entrepreneurial spirit and take calculated risks to achieve our mission. We aren't afraid to ask “why not” and challenge the status quo. We maintain a start-up culture of camaraderie and leadership by example, regardless of title. We're proud to be an equal opportunity employer, and recognize that celebrating our differences creates stronger, lasting solutions that better serve our team, our patients and their healthcare providers. Notice to staffing firms Orca Bio does not accept resumes from staffing agencies with which we do not have a written agreement and specific engagement for a particular opening. Our employment activities, inquiries and offers are managed through our HR/Talent team, and all candidates are presented through this channel only. We do not accept unsolicited resumes, and we rarely outsource recruitment.