Quality control technician jobs in Savannah, GA

CWM is seeking a dedicated and detail-oriented Quality Control (QC) Technician to join our team. The QC Technician will be responsible for performing routine testing of Hot Mix Asphalt (HMA) to ensure compliance with job or agency specifications. This includes assisting with adjustments to plant settings, collecting samples, and supporting mix design development. The QC Technician plays a critical role in maintaining the quality of materials used in paving projects and ensuring adherence to industry standards. * ---- Essential Duties and Responsibilities: * Perform daily QC testing on Hot Mix Asphalt as required by governing agencies and at the discretion of the QC Manager. * Collect samples of materials and asphalt for testing and analysis. * Record and report data collected from tests to ensure accurate tracking and documentation. * Assist in the development and modification of mix designs based on test results and plant production needs. * Conduct stockpile analysis on incoming aggregates and Recycled Asphalt Pavement (RAP) stockpiles as needed to maintain quality control. * Monitor and assist in adjustments to plant settings to ensure proper mix consistency and compliance with specifications. * Ensure all work is in compliance with safety standards, quality control protocols, and regulatory requirements. * Communicate effectively with team members and supervisors to report findings and assist with decision-making. Education and Experience: * High school diploma or GED equivalent required. * At least six months of experience in asphalt quality control preferred. * GDOT Asphalt Level I & II training is a plus, but not required. * Basic knowledge of materials, mixing processes, and asphalt quality control. * Basic mathematical skills, including the ability to add, subtract, multiply, divide, calculate percentages, and work with weights. * Ability to read and comprehend technical manuals, use measuring devices, and follow verbal and written instructions. * Must have good penmanship, record-keeping, and basic computer skills. Minimum Skills and Requirements: * Ability to perform strenuous work and handle physical tasks. * Ability to work nights and weekends as needed. * Must possess a valid driver's license for the territory of operation. * Ability to communicate effectively over the company radio and with team members. * Ability to work independently and as part of a team to ensure job and project requirements are met. What CWM Offers You: * A culture that values opportunity for growth, development, and internal promotion. * Highly competitive base pay. * Comprehensive health benefits, including health, dental, vision, life insurance, and disability programs. * 401(k) plan with company contributions. * Paid Holidays and Year-End Bonus. * Child Care Assistance Additional Information: The job involves standing, walking, and performing tasks that may require lifting. Duties may vary based on project requirements and company needs. Occasional work during nights and weekends may be required. CWM is an Equal Opportunity Employer - M/F/V/H. Women and minorities are encouraged to apply.

Blythe Construction has lead development in North and South Carolina for over 90 years since our company's founding in 1921. In that time, our many generations of employees have completed thousands of contracts, from large highways to small commercial site development. Our company's history is one of continued evolution and growth. Beginning as a small independent asphalt development company, Blythe expanded its resources and influence through significant mergers throughout many years, eventually becoming part of the Vinci USA network extending from as far north as Maine to as far west as Texas. Description The Quality Control Asphalt Mix Design Technician will work under the direction of the Quality Control Manager in the formulation and implementation of asphalt mix designs/job mix formulas at the asphalt plants. Key Duties * Follow the directions and instructions of the Quality Control Manager. * Conduct sampling and testing in accordance with applicable SCDOT, AASHTO, and ASTM standards. * Perform daily equipment verifications as instructed by the Quality Control Manager. * Perform or assist in performing all necessary equipment calibrations as directed by the Quality Control Manager. * Testing of samples in accordance with applicable specifications, QC Plan and Quality Management System requirements. * Care and maintenance of all laboratory equipment and inventory. * Keeping the laboratory in a neat, clean and orderly fashion. * Accurate reporting of test results on their proper forms. * Completion of all documentation used to report test results (i.e. - worksheets, sample and test logs, Certificate of Analysis, etc.). * Disposal of waste material upon completion of testing. * Assist plant personnel during batch production as necessary to insure product quality control objectives are met (process control testing). * Communicating batch test results and certifications to plant personnel * Assist the Quality Control Manager in meeting compliance reporting requirements timelines as outlined in the QC plans and Quality Management System. * Assist other technicians and employees as needed * Attend and complete training as required (company, certification, etc.). * Other activities as assigned by the quality control manager Qualification Requirements * General. To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Education and Experience. This position typically is not an entry-level job, as it requires demonstrable previous experience as a Quality Control Asphalt Lab Technician and experience with formulating asphalt mix designs/job mix formulas. * SCDOT HMA Level 2 Job Mix Technician certification. * Working proficiency in Microsoft Excel, Word and Outlook. * Familiarity with SCDOT, AASHTO, and ASTM specifications for asphalt emulsions, asphalt materials and testing. * Possess a working understanding of statistical process control. * Ethical professional and behavioral standards. * Physical Demands. The following physical demands are representative of those that must be met by a Laboratory Technician to successfully perform the essential functions of this job. * Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. * Frequently walk on uneven surfaces, including natural ground in varying weather conditions. * Work Environment. The work environment characteristics described below are representative of those that a Laboratory Technician encounters while performing the essential functions of this job. * Work is performed predominantly indoors. * Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project. Company Benefits: * Company Paid Basic Life Insurance * Company Paid Long Term Disability Policy * Company Paid Vacation & Holiday Pay * Company Paid Parental Leave * Company Paid Maternity Leave * Company Paid Employee/Family Assistance Program (EAP) * Voluntary Medical & Vision Insurance * Voluntary Dental Insurance * Voluntary Short Term Disability * Voluntary Supplemental Term Life * Voluntary Accident, Legal, Hospital, Critical Illness Policies * 401(k) Plan w/Employer Match * Annual Company Stock Purchase Opportunities * Discount Partnerships: Verizon, Ford, Perkspot * Health and Wellness Benefits, including Monthly Gym/Fitness Incentives We promote a Drug-Free Workplace. EOE AA M/F/Vet/Disability are encouraged to apply. Blythe Construction, Inc. - Hubbard Construction Company - Northeast Paving - Sunmount Paving - Virginia Paving Company, are hereby referred to as Vinci Construction USAAccessibility: If you need an accommodation as part of the employment process please contact Human Resources at Blythe Construction, Inc.: Phone: ************Hubbard Construction Company: Phone: ************Eurovia Atlantic Coast, LLC:Phone: ************ Vinci Construction USA is an Equal Opportunity Employer.Vinci Construction USA is committed to providing a fair and equal employment opportunity workplace. All hiring and promotional decisions are made without regard to race, color, religion, sex (including pregnancy), genetic information, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other status that is protected by federal, state, or local law. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language:

Our client, a leader in the manufacturing industry, is seeking a Quality Control Technician (CMM Programmer) to join their team. As a Quality Control Technician, you will be part of the Quality Control department supporting various operational teams. The ideal candidate will have strong problem-solving skills, excellent communication abilities, and a results-driven mindset which will align successfully in the organization. **Job Title:** Quality Control Technician (CMM Programmer) **Location:** Richmond Hill, GA **Pay Range:** $60,632 to $80,620 Pay depending upon experience level 1-1st shift opening 2-2nd shift openings **What's the Job?** + Develop and implement systems to ensure products meet or exceed customer requirements. + Perform CMM programming for all parts requiring measurement using the CMM machine. + Train quality control operators on the correct setup and operation of CMM machines. + Participate in cross-functional teams with other departments and engineering disciplines. + Apply problem-solving methodologies to identify and resolve quality issues. **What's Needed?** + High school diploma or equivalent. + 1+ years of experience in quality control in manufacturing or CMM Programming. + Strong understanding of GD&T (Geometric Dimensioning and Tolerancing). + Proficiency with Microsoft Word, Excel, and PowerPoint. + Excellent written and verbal communication skills. **What's in it for me?** + Opportunity to work in a dynamic and supportive environment. + Chance to develop your skills and advance your career in quality control. + Engage in continuous improvement initiatives. + Be part of a team that values collaboration and innovation. + Contribute to the success of high-quality manufacturing processes. **Upon completion of waiting period associates are eligible for:** + Medical and Prescription Drug Plans + Dental Plan + Supplemental Life Insurance + Short Term Disability Insurance + 401(k) If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! **About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells** _ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands -_ **_Manpower, Experis, Talent Solutions, and Jefferson Wells_** _-_ creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent. ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

Job Description Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

We are passionate about what we do - and we're looking for People who bring that same energy. If you want to join an awesome, high-performing team where collaboration, safety, and innovation drive everything we do, Fuji Vegetable Oil, Inc. is the right place for you. We are currently seeking an energetic, mechanically inclined, and safety-focused Processing Technician to join our CBE Team at our Savannah, GA Plant. Starting pay: $24.00/hr | Swing (DuPont) Schedule | Immediate Openings WHO THRIVES IN THIS ROLE? This opportunity is ideal for someone who: Can work a 12-hour DuPont swing schedule Is comfortable working in heat and outdoor conditions Isn't afraid of heights (ladders/catwalks up to 60 ft.) Can confidently read a tape measure and perform basic mechanical checks Enjoys hands-on work and troubleshooting equipment Has experience in a food-grade manufacturing facility (a plus!) Has forklift experience or certification (also a plus!) If you like staying active, taking pride in safe and precise operations, and being part of a strong team-this role is for you. WHAT WE OFFER Fuji Vegetable Oil (FVO) provides an excellent, competitive benefits package, including: Semi-Annual Bonus Opportunities based on performance 401(k) company-funded contribution of 12.5% (no match required!) Outstanding health insurance options - benefits start Day One PTO and paid holidays Basic Life Insurance Short- and Long-Term Disability Remote Healthcare Employee Assistance Program (EAP) Boot vouchers, required PPE, and uniforms Eligible dependents-including legal spouses and children under age 26-may also be enrolled. POSITION SUMMARY The Processing Technician supports the safe and efficient receipt, handling, blending, and movement of edible vegetable oils. This role works with computer-controlled processing equipment and requires the ability to adapt to changing operational needs. Overtime, nights, weekends, and holidays may be required with or without notice. ESSENTIAL DUTIES & RESPONSIBILITIES Operate computer-driven process systems, boilers, and wastewater treatment equipment Sample, measure, and monitor tank temperatures and inventory levels Receive, store, and handle chemicals and ingredients Blend and transfer oils; operate valves; ensure proper heat tracing and line clearing Monitor and adjust pH and dosing for wastewater operations Support boiler operations and fuel conversion systems Clean and contain oil spills when necessary Change industrial filters and clean process areas Prepare equipment for startup, shutdown, freeze plans, and weather events Perform troubleshooting and minor maintenance/repairs Operate forklifts to move materials Support special projects and additional duties as assigned QUALIFICATIONS Education/Experience: High school diploma or GED required Minimum six months manufacturing or industrial experience preferred Food-grade manufacturing experience strongly preferred Mechanically inclined and comfortable learning technical systems Skills: Ability to read safety documents, standard operating procedures, and maintenance instructions Capable of completing reports and communicating via radio Strong mathematical ability (fractions, decimals, conversions, basic algebra) Strong problem-solving and situational assessment skills Ability to use a tape measure accurately PHYSICAL DEMANDS Must be able to: Stand, walk, climb (up to 60 ft.), balance, stoop, kneel, and crawl Lift up to 50 pounds (with reasonable accommodation) Distinguish hot vs. cold surfaces Use vision to monitor gauges and control screens Work in confined spaces and pass respiratory clearance WORK ENVIRONMENT Exposure to heat, outdoor elements, elevated work platforms Exposure to machinery, noise, fumes, chemicals, and airborne particles Occasional exposure to wet/humid environments Loud working environment due to operating equipment

Qual Assurance Technician III Company: Gulfstream Aerospace Corporation Qual Assurance Technician III in GAC Savannah Unique Skills: This position will be working with our materials group in tool cribs. Will need to travel to different parts of the campus to address needs. Majority of work will be conducting out of stock sweeps. Education and Experience Requirements Job Description Principle Duties and Responsibilities: Essential Functions: * Work with senior Quality Assurance personnel to develop quality methods required. for the product or service of the area. * Revise department procedures and instructions as required. by senior Quality Assurance personnel to implement quality control requirements. * Assist in the Review Test and Assembly Documentation. Review new and revised Blue Prints. * Recommend revision or modification of systems, methods and techniques necessary to maintain or improve quality and/or reliability. * Responsible for technical direction of activities in one or more areas of the Quality Assurance Department. * Write and review both internal and external Corrective Actions. * Follow-up on Corrective Action implementation. * Participate in and lead audits and improvement workshops. * Assure that the investigations on Quality issues are conducted according to department procedures and work instructions. * Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes. * Interrogate data and prepares analysis or associated documentation. * Maintain a high level of customer satisfaction (internal and external customers). * Work with other departments and/or disciplines. * Promote and encourage a continuous improvement culture. Additional Functions: * Support the operating priorities as identified by the Quality leadership team. . * May support other areas of Quality. . Perform other duties as assigned. Other Requirements: * Working knowledge of Geometric Dimensioning & Tolerance (GD&T) standard ASME Y14.5 preferred. * Ability to define problems, collect data, establish facts, and draw valid conclusions. * Working knowledge of Statistical tools used for problem resolution. * Lean/Six Sigma certification as a Green belt preferred. * Knowledge of manufacturing and/or maintenance processes (i.e. Assembly, Machining, Special Process, Inspection, etc.). * Excellent communication and interpersonal skills required. * Proficient computer skills. This job requires one to be able to read, write, speak, and understand the English language. #LI-KP2 Additional Information Requisition Number: 230021 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 01/05/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah Job Segment: Lean Six Sigma, Six Sigma, QA, Quality Assurance, Aerospace, Management, Quality, Technology, Aviation

The position of Quality Assurance Technician reports to the Quality Assurance Supervisor/Manager. The QA Technician determines the chemical and physical characteristics of raw materials, intermediate bulk products, finished products and experimental products using SOPs and following GMP principles. Specific Duties and Responsibilities: Obtains test samples of incoming lots of chemical raw materials, in-process intermediates and production batches. 2. Maintain clean, efficient and properly operating laboratory equipment. Ensure all instruments used in product quality testing meet calibration requirements followed by written SOPs. Maintains QA's Material Safety Data Sheets (MSDS) and Certificates of Analysis (COAs) on all chemical raw materials. Perform inspections on incoming materials and review final products to ensure quality specifications are met. Will use test equipment to evaluate the materials or products and records data from test procedures and inspections. Collect, label and ship microbiological samples. Collect product samples from production filling lines and maintain storage of retained samples. Maintain a close working relationship with production personnel to provide a smooth, efficient production flow of quality products. Ensures the cleanliness of production filling lines following GMP procedures. Auditing production-filling lines for accuracy of fill weighs, lot number and proper paper work. Communicate to QA Supervisor or QA Manager persistent or difficult quality problems. Education/Experience: B.S/B.A in Chemistry or other scientific field

Job Description Have you ever imagined shaping your day as a Metal Processing Technician? Join TW Metals and revolutionize the future of metals distribution globally! Step into a role filled with opportunities for growth and making a definite impact in both Aerospace & Commercial industries.Your Role Responsibilities: Ensure safety in all operations Maintain cleanliness and organization in your area Learn continuously - no experience is no barrier, we train! Operate saws for metal cutting with precision Handle industrial forklifts or side loaders effectively Possess a diploma or GED Ready to thrive independently Expand Your Horizons: Explore additional competencies: Deburr, Packing, Export, Receiving, Shipping, and hands-on with various advanced machinery like PVC Machine, Chop, and Band Saws, Plate Saw, Shear Machine, Waterjet, and Laser Machine. Physical Contribution: Expect dynamic physical activities including prolonged standing and kneeling, lifting 50 pounds regularly and up to 100 pounds occasionally with support. Vision acuity must be managed effectively, whether naturally or with corrective solutions. Why TW Metals? Embrace our rewarding benefits: Incentives surpassing $2,000 yearly, dynamic performance rewards, educational incentives, comprehensive 401(k), and holistic benefit plans. **TW Metals, LLC is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will be considered for employment regardless of race, religion, gender, gender identity, sexual orientation, national origin, disability, age, or veteran status. TW Metals is also committed to complying with all fair employment practices regarding citizenship and immigration status.** **Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Discover more: *********************** Core Competencies: Mechanical Troubleshooting Proficiency Efficiency in CNC Machine Configuration Certified with OSHA 10-Hour Certification Forklift Licensing Deburring Knowledge Packaging Skills Metal Casting Insight Mathematical Applications in a Shop Environment Manufacturing Industry Experience

Qual Assurance Tech III in GAC Savannah Unique Skills: This position will be working with our materials group in tool cribs. Will need to travel to different parts of the campus to address needs. Majority of work will be conducting out of stock sweeps. Education and Experience Requirements High School Diploma or GED required. 6 years quality assurance/control, manufacturing operations, maintenance and/or military operations experience is required.. Aerospace industry experience preferred.. Position Purpose: A Quality Assurance Technician III works with senior Quality Assurance personnel to develop and maintain optimum methods of controlling quality and /or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support through means of investigations on known Quality issues. Implement plans and instructions in support of departmental policies. The QA Tech will work with senior Quality Assurance personnel determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers. Job Description Principle Duties and Responsibilities: Essential Functions: * Work with senior Quality Assurance personnel to develop quality methods required. for the product or service of the area. * Revise department procedures and instructions as required. by senior Quality Assurance personnel to implement quality control requirements. * Assist in the Review Test and Assembly Documentation. Review new and revised Blue Prints. * Recommend revision or modification of systems, methods and techniques necessary to maintain or improve quality and/or reliability. * Responsible for technical direction of activities in one or more areas of the Quality Assurance Department. * Write and review both internal and external Corrective Actions. * Follow-up on Corrective Action implementation. * Participate in and lead audits and improvement workshops. * Assure that the investigations on Quality issues are conducted according to department procedures and work instructions. * Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes. * Interrogate data and prepares analysis or associated documentation. * Maintain a high level of customer satisfaction (internal and external customers). * Work with other departments and/or disciplines. * Promote and encourage a continuous improvement culture. Additional Functions: * Support the operating priorities as identified by the Quality leadership team. . * May support other areas of Quality. . Perform other duties as assigned. Other Requirements: * Working knowledge of Geometric Dimensioning & Tolerance (GD&T) standard ASME Y14.5 preferred. * Ability to define problems, collect data, establish facts, and draw valid conclusions. * Working knowledge of Statistical tools used for problem resolution. * Lean/Six Sigma certification as a Green belt preferred. * Knowledge of manufacturing and/or maintenance processes (i.e. Assembly, Machining, Special Process, Inspection, etc.). * Excellent communication and interpersonal skills required. * Proficient computer skills. This job requires one to be able to read, write, speak, and understand the English language. #LI-KP2 Additional Information Requisition Number: 230021 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 01/05/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft Nearest Major Market: Savannah

The Quality Control Technician / CMM Programmer position is responsible for supporting the execution of quality management systems, procedures, and policies using metrology, and physical inspection. Conducts application and analysis testing and inspection of parts to ensure standards are met; uses same to develop, operate and improve quality control systems. Supports and advises management on all aspects of quality control. The role will serve the operations of Mobis North America Electrified Powertrain, LLC (MNAe). Essential Functions (To perform within this position successfully, the incumbent must be able to perform each essential duty satisfactorily. Other duties may be assigned.) Develop and implement systems to ensure products are produced to meet or exceed customer requirements and expectations. Perform CMM programming for all parts that require measurement using the CMM machine. Train quality control specialists on how to correctly operate the CMM machines. Participate in the change management process to ensure the products continue to meet customer requirements. Participate in cross-functional teams with other departments, business, and engineering disciplines. Establish the principles of product quality evaluation and control for the system. Provide independent oversight and review of deliverables throughout the lifecycle of each program. Assist management with the development and revision of quality programs. Assist in defining/developing quality program status indicators, performance measurements, and reporting requirements. Assists with implementing inspection plans, FTTQ, In-process, final inspection, sampling, and inspection acceptance criteria. Perform internal process audits to assess compliance with standards and the internal quality system, including investigation, presentation of observations and findings, and reporting. Apply problem-solving methodologies in identifying, prioritizing, communicating, and resolving all quality issues. Document the ramifications from in-process quality issues such as downtime and OS&D and chargeback to the responsible parties. Irregular quality training for workers (process failure cases, improvement measures, BSA disassembly/assembly, etc.) All other duties as assigned CMM Programmer responsibilities: Program and calibrate the coordinate measuring machine (CMM) Conduct quality control inspections Write programs to be efficient and minimize quality issues Write CMM programs to support inspection activities (as needed) Train and develop quality staff as designated by the QC Manager to further grow staff Prepare detailed inspection documentation such as written descriptions of inspection results Investigate causes of dimensional deviations and recommend corrective actions Perform maintenance as necessary Work with a team to meet manufacturing deadlines Supervisory Responsibilities: No Basic Qualifications (The requirements below represent the knowledge, skills, and/or ability required and preferred for this position.) Preferred Education & Experience High school diploma or equivalent 1+ years of quality control in manufacturing or CMM Programming Strong understanding of GD&T Other metrology system experience (FARO, Keyence, Zeiss, Klingelnberg, Mitutoyo, etc.) Required Knowledge, Skills, & Abilities Must be goal-oriented, customer-focused, and results-driven Excellent written and verbal communication skills Proven interpersonal, communication, and time management skills Proven experience with Microsoft Word, Excel, and PowerPoint Licenses and Registrations: None required Working Conditions: Incumbent spends less than 50% of the time on the manufacturing floor

SUMMARY: Quality Assurance Inspector is responsible for ensuring production standards are met and maintained for products before they leave the facility. This is achieved by continuously evaluating the product through highly accurate inspection, reporting and recording of deficiencies found. DUTIES AND RESPONSIBILITIES: Support quality initiatives for the Hyundai and Kia product lines. Provide quality assurance support to the Hyundai and Kia door module, latch, and other platforms. Provide shop floor support to quality assurance specialists and production by accurately reporting and recording quality issues. Travels to customer locations to address quality issues when necessary. Coordinates the containment of defective material. Maybe assigned to perform incoming inspection of components. Maybe assigned to perform some production support duties. Performs other related duties as assigned by management. QUALIFICATIONS: High school diploma or general education degree (GED) Required skills: Ability to utilize computer applications such as Microsoft Office suite. At least one year's experience in a production environment. Ability to work overtime on short notice. Good communication skills. Ability to work in a team environment. Other skills preferred but not required: Familiar with blueprints, dimensional check fixture gaging, GD&T, handheld measuring tools. Math and algebra skills are highly desired. Good handwriting skills. PHYSICAL DEMANDS AND WORK ENVIRONMENT: Continually stand or walk >90% of work time. Continually required to talk, hear, write. Required to utilize hand and finger dexterity. Frequently lift and or move up to 30 lbs. Performing duties of this job the noise level in the work environment is usually moderate. Specific vision abilities required by this job include close vision inability to just focus. The work area is heat/air conditioned within an office environment, with 100% of the time spent in a shop floor environment.

Construction QC (Quality Control) Technician ensures the integrity, reliability, and compliance of telecommunications installations and services. This role is essential in maintaining industry standards, improving operational efficiency, and supporting safety practices. Key Responsibilities: Inspection & Testing: Conduct inspections and tests on telecommunications equipment, cabling, and installations to ensure compliance with specifications, safety standards, and industry regulations. Accurately record inspection and test results using tools such as JotForms. Note any defects, discrepancies, or non-conformances. Process Improvement: Recommend corrective actions and assist in developing and refining quality control procedures, checklists, and protocols. Compliance: Ensure all work aligns with company policies, engineering drawings, and applicable codes and standards. Collaboration: Coordinate with installation teams, engineers, and other departments to address quality issues and drive continuous improvement. Required Skills: Technical Expertise: In-depth knowledge of telecommunications technologies, installation practices, and equipment functionality. Inspection & Testing Proficiency: Construction QC (Quality Control) Technician Skilled in using testing tools to verify signal strength, cable continuity, and system performance. Data Analysis: Capable of interpreting test results, identifying trends, and generating clear and concise reports. Attention to Detail: Highly meticulous when reviewing installations and documenting findings. Communication: Strong verbal and written communication skills to relay technical insights and collaborate with cross-functional teams. Problem-Solving: Effective at troubleshooting issues and recommending feasible, timely solutions. Typical Job Duties: Inspect newly installed plant, equipment, and systems for quality assurance. Test cable and fiber installations for performance metrics such as signal strength, attenuation, and continuity. Compare field work against engineering drawings, job specifications, and codes. Document all inspection results and maintain records of identified issues or deviations. Generate detailed quality reports with recommendations for corrective action. Ensure all test equipment is calibrated, functional, and properly maintained. Participate in the development and continuous improvement of QC procedures. Deliver training to field crews on quality control expectations and procedures

AWP Safety is the leading traffic safety company in the US. We work primarily with construction and utility companies, but also do special events and our growth is skyrocketing! Join a team with lots of opportunity where you are valued as an individual, not just a number. Unlock Your Career Potential in Traffic Safety with AWP Safety - America's Leading Traffic Management Company! Overview: AWP Safety is seeking an experienced and dependable Interstate Crew Lead to oversee traffic control operations on major highway projects. This role requires OPEN AVAILABILITY with extensive knowledge of Maintenance of Traffic (MOT) procedures, hands-on experience with Traffic Management Attenuator (TMA) trucks, and the ability to lead crews in high-risk, fast-paced environments. The ideal candidate will ensure safety, compliance, and efficiency in all traffic control setups and operations. This position is perfect for those who thrive in diverse environments and are seeking a dynamic career path without the requirement of a college degree. Join AWP Safety and be part of a fast-paced, safety-first culture that prioritizes your growth and development. Job Description As an Interstate Crew Lead you will: Lead and coordinate traffic control crews on interstate and highway projects and special events. Set up, monitor, and maintain MOT zones in accordance with state and federal guidelines. Operate and oversee the use of TMA trucks and other traffic control equipment. Conduct safety briefings and ensure crew adherence to safety protocols. Communicate effectively with project managers, DOT officials, and other stakeholders. Perform site inspections and adjust traffic control setups as needed. Maintain accurate records of daily operations, incidents, and equipment usage. Train new crew members on MOT procedures and equipment handling. Respond to emergency situations and adjust traffic control plans accordingly. Qualifications Minimum 1-3 years of highway traffic control experience, including leadership roles. MOT certification (state-specific or nationally recognized). Proven experience operating and managing TMA trucks. Ability to pass a DOT physical and maintain a valid driver's license (CDL preferred). Strong understanding of traffic control standards (e.g., MUTCD, GUTCD). Excellent leadership, communication, and problem-solving skills. Must have Open Availability and be highly flexible with schedule including weekends and nights in varying weather conditions. Ability to lift 50+ lbs. and perform physical tasks related to traffic control setup. Must pass pre-employment screenings, including background check and drug screen as this is a safety-sensitive role. Preferred Qualifications: CDL Class A or B license. OSHA 10 or 30 certification. Experience with GPS tracking and digital reporting tools. Additional Information What We Offer: Competitive Pay: $19.50-$20/hour based on experience, overtime opportunities, guaranteed pay increase within the first year. Rapid Advancement: Potential opportunities to progress to Senior Protector in just 4 months, with further growth potential to Lead Protector, Field Supervisor, or Manager roles. Comprehensive Training: Paid, on-the-job training including ATSSA certification and defensive driving, with ongoing professional development. Benefits for eligible employees: Paid Time Off (PTO) and Paid Holidays, Paid Sick Time (in states applicable), EAP, Daily Pay option, Health Insurance and 401k opt-in. Union Facilities: PTO and Holidays are union provided Recognition and Rewards: Competitive referral incentives and recognition for your dedication and hard work. Seize the Opportunity to Make a Difference Every Day! Apply now to join AWP Safety and embark on a career path that offers unparalleled growth opportunities, comprehensive benefits, and the chance to be a part of America's leading traffic safety company. Your journey towards a rewarding career in traffic management starts here! All your information will be kept confidential according to EEO guidelines. AWP considers any position that requires the individual to drive an AWP vehicle and/or be present at an AWP worksite for any reason a safety sensitive position. AWP Safety is an Equal Opportunity Employer (EOE). Women, minorities, veterans, and individuals with disabilities are encouraged to apply. Qualified applicants will receive consideration for employment without regard to their race, color, age, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.

Quality Inspector Status: Full Time, Non- Exempt Schedule: 40 Hr Seoyon E-Hwa is a leading automotive parts manufacturing company specializing in precision injection molding solutions. Dedicated to innovation and excellence, our primary focus involves offering Tier 1 manufacturing support to the automotive OEM's. As we expand our operations, we are seeking a talented Quality Inspector to join our dynamic team at the Client Site. Position Overview: We are seeking a meticulous and detail-oriented Quality Inspector to join our team at Seoyon E-HWA Manufacturing Savannah, a leading manufacturer of automotive interior parts. As a Quality Inspector, you will be responsible for ensuring that all products meet our high standards of quality, safety, and functionality. This role involves inspecting materials, in-process products, and finished goods, as well as collaborating with production teams to resolve quality issues and ensure continuous improvement. Candidates must be willing and able to perform duties at the client site as part of their responsibilities. Responsibilities Inspect automotive interior parts to ensure conformance to product specifications and quality standards. Perform both visual and dimensional inspections using tools such as calipers, micrometers, gauges, and other measuring instruments. Conduct functional testing to verify that parts meet performance requirements. Identify defects or deviations from product specifications and document findings accurately. Record inspection results, track non-conformities, and maintain detailed reports for compliance and traceability. Communicate quality issues to production staff and assist in root cause analysis and corrective actions. Ensure compliance with all relevant industry standards, customer specifications, and regulatory requirements. Assist in the development and implementation of inspection procedures and work instructions. Work closely with the production team to resolve quality concerns, improve processes, and maintain high levels of product consistency. Perform audits on raw materials and finished products to ensure consistency in quality across all production stages. Support internal and external audits as required. Participate in continuous improvement initiatives and suggest process enhancements to improve product quality. Qualifications High school diploma or equivalent; additional certification in Quality Control or Engineering is a plus. Previous experience in quality inspection, preferably in the automotive or manufacturing industry. Strong understanding of automotive interior parts and components. Proficiency with measuring instruments (calipers, micrometers, gauges, etc.). Familiarity with quality standards such as ISO 9001, TS16949, or similar. Excellent attention to detail and a keen eye for identifying defects or deviations. Strong communication skills and the ability to collaborate effectively with cross-functional teams. Ability to read and interpret technical drawings, specifications, and blueprints. Basic knowledge of statistical process control (SPC) and quality improvement techniques. Ability to work independently with minimal supervision while maintaining a team-oriented approach. Physical Requirements: Ability to stand for extended periods. Ability to lift and carry up to 25 lbs. Manual dexterity for using inspection tools and equipment. Benefits: At Seoyon E-Hwa, we believe that our success is driven by the well-being and satisfaction of our employees. We are committed to fostering a positive and inclusive workplace where every team member can thrive. Medical/Dental/Life Insurance 401k Paid Time Off Paid Holidays Seoyon Ehwa Manufacturing Savannah Inc is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

As a Quality Control Associate, you will play a critical role in ensuring that all products meet our company's high standards of quality. You will conduct inspections, perform tests, and collaborate closely with production and supply chain teams. Korean language skills are highly preferred to support communication with our Korean-speaking partners and vendors. Key Responsibilities Perform routine product inspections and quality assurance checks Document and report quality issues clearly and accurately Communicate with Korean-speaking teams and vendors to resolve quality concerns Maintain compliance with company policies and regulatory standards Participate in continuous improvement initiatives Support audits and prepare quality reports as needed Identify, document, and report non-conformities or defects Operate and maintain inspection equipment and tools Work closely with production and engineering teams to resolve quality issues Record inspection results and maintain accurate documentation Follow standard operating procedures and safety guidelines Support continuous improvement and root cause analysis efforts Pay Rate: $21/Hr Requirements Prefer Male applicants preferred for physical job requirements Basic mechanical knowledge or experience in a manufacturing or technical field Conversational proficiency in both English and Korean Able to use basic Microsoft Office tools (Excel, PowerPoint) Must be physically fit and able to work on the production floor Salary Description $21/Hr

EP Tech / EP Lab Tech Location: Savannah, GA Agency: Coast Medical Service Pay: $2,529 per week Shift Information: Days - 4 days x 10 hours Contract Duration: 13 Weeks Start Date: ASAP AlliedTravelCareers is working with Coast Medical Service to find a qualified Electrophysiology Tech in Savannah, Georgia, 31404! Coast Medical Service is a nationwide travel nursing & allied healthcare staffing agency dedicated to providing an elite traveler experience for the experienced or first-time traveler. Coast is featured on Blue Pipes' 2023 Best Travel Agencies and named a 2022 Top Rated Healthcare Staffing Firm & 2023 First Half Top Rated Healthcare Staffing Firm by Great Recruiters. Please note that pay rate may differ for locally based candidates. Please apply here or contact a recruiter directly to learn more about this position & the facility, and/or explore others that may be of interest to you. We look forward to speaking with you! About Coast Medical Service There are agencies that take care of your logistics, and then there are agencies that give you agency - over your own career, your own job placements, and your own life. Coast Medical Service is a travel healthcare professional placement agency helping nurses and Allied Healthcare Professionals across the country and in Guam to find handpicked placements best suited to their skill sets and desired facilities. We pride ourselves on our longstanding reputation placing temp healthcare workers where they are most needed. Since 1979, Coast Medical Service has operated as a family-owned business, serving thousands of the highest-performing healthcare professionals over the years, establishing close relationships with each to ensure their ongoing success in the traveling healthcare industry. We offer exceptionally competitive pay, a schedule you can set up yourself based on your terms, and the opportunity to see the world, changing placements every few weeks, months, or years, as desired. We have been ranked in the top national agencies for this purpose for multiple reasons - we offer extensive benefits, we have stellar communication skills, and you will quickly find we are the most trustworthy agency around. You are not a transaction to us. You are a teammate, and a family member. We can't wait to talk to you, and get you set up for your first job placement through Coast Medical Service. Requirements Required for Onboarding BLS Core Mandatory Part I Exam Core Mandatory Part II (Allied) Exam Core Mandatory Part III Exam Electrophysiology Skills Checklist 11033511EXPPLAT

Our growing Industrial Division is a multi-disciplined industrial construction group self-performing Concrete, Electrical, Structural, Pipe, and Deep Foundation scopes in industrial process facilities. Since 1945, Morgan Corp has developed into one of the largest diversified heavy construction companies in the Southeast. The Industrial Division is based in our Spartanburg office and performs work throughout the Southeast. Our Industrial Division services include: * Structural Concrete * Electrical - duct banks/raceways, power/control cabling, MCC/Switchgear installation, control systems, and grounding * Piping - utility/process piping * Lifting and Rigging * Geostructural - support of excavation, retaining structures, and deep foundations * Concrete Repair - spall repairs, shotcreting, crack injection and chemical grouting. About the Role We believe that a quality construction project is critical to our success. The Quality Control Inspector role varies from project to project based on the scopes being performed, but may include the following: * Reviewing the project plans and specifications to identify: * The code of construction. * Required regulatory, owner, and Morgan inspection items. * Required documentation and record keeping. * Required training, qualification, certifications, and licensing to successfully implement the project. * Research and understand construction codes to communicate and develop construction strategies with the project team to meet the needs of the project. * Work with the project team to develop a Project Specific Inspection and Test Plan that will be incorporated into the project schedule to aid in the planning of the work, as well as document the inspections. * Manage Quality activities with the project team, owner, and inspectors. * Work with the project team to coordinate the necessary third-party, owner, or jurisdictional inspections. * Complete the Inspection and Test Plan and generate the necessary turnover packages to satisfy internal and owner requirements. What We're Looking For * A minimum of 5 years of experience managing QA/QC efforts in Industrial Construction. * A strong grasp of many of the codes and standards we deal with such as ASME, ACI, NECA, ASTM, etc. * The ability to research codes and standards and work with the project team to develop work plans and ITP's that will satisfy the requirements of the project. * A willingness to work with a team and as well as independently. * Willingness to travel. * Willingness to work outside in various types of environmental conditions or in operating process facilities. * Strong computer skills and familiarity with Word and Excel. * Strong Organizational and time management skills. * Strong attention to detail. What We Offer * Comprehensive medical, dental, and vision health coverage * Competitive compensation and retirement benefits (401k w/company match) * PTO (including holiday pay PLUS a week-long "winter shutdown") * Professional development & training * Career advancement For additional company information, please visit us at ******************* Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

Civil Engineering Technician Thomas & Hutton is a growing, well-established civil engineering firm providing consulting services throughout the southeast. We are an award-winning company that has been recognized as one of the best places to work in Georgia and South Carolina. Some of our many services include Civil, Environmental, Structural and Marine Engineering; Land Surveying; Land Planning; Landscape Architecture; Geographic Information Systems and Construction Administration. Thomas & Hutton has an opening for an experienced Civil Engineering Technician in our Savannah, GA office with project experience with land development, roadways, water, and sewer. Qualified candidates will have 3+ years experience using CADD in the preparation of design drawings, exhibits, and reports. Demonstrated experience working on land development projects using Autodesk Civil 3D software is required. Typical Duties: Under moderate supervision of a Project Engineer or Project Manager conducts tasks of complexity varying from basic to somewhat complex. Prepares routine design calculations and collects or prepares data for use by others in complex engineering analysis or studies. Applies moderate exercise of judgment or decision making regarding design issues and concepts. Responsible for preparation of project plans, exhibits, and reports and coordinates the work of other technicians as part of a project team. May also prepare project specifications. Prepares quantity estimates and cost estimates. Proficient in the use of computer aided design tools for the preparation of construction plans, design considerations and quantity estimates. Proficient in the use of CADD tools for the preparation of plans and exhibits and thoroughly understands and follows the company's graphic standards. Ensures that work is being performed within the project schedule and budget. Proficient in using and following company design standards. Has minimal responsibility for client contact and coordination. May prepare permit applications and bid packages. May attend project meetings with clients, agencies or contractors. Communicates project status to the Project Manager on a regular basis. May provide input on the development and maintenance of CADD standards and details. Provides input to Project Manager regarding project schedule. Performs administrative tasks as necessary. Other duties as necessary and/or assigned by supervisor. Minimum Requirements: Education: Minimum of high school or technical school training with courses in computer-aided drafting or equivalent experience. Skills: Advanced knowledge of CADD and related design tools. Advanced knowledge of Company graphic standards. Knowledge of Microsoft Word and Excel. Strong communication skills. Physical Requirements: Ability to visualize objects, distances, sizes and abstract forms. Ability to sit and use computer equipment, including mouse for extended periods Frequent standing and walking. Ability to interact both verbally and written Ability to lift up to 25 lbs. Please note, sponsorship is not available for this position. Thomas & Hutton is a Drug-Free Workplace & E-Verify Participant Thomas & Hutton's Mission Statement, “Relationships and Solutions for Success” describes not only our unwavering commitment to clients but also our commitment to the success, both professionally and personally, of our employees. Thomas & Hutton was named to the Best Places to Work in South Carolina and Georgia by SCBIZ and Georgia Trend, and named One of the best Civil Engineering firms to work for by CE News/Zweig White. What makes Thomas & Hutton a great place to work? Opportunities for professional development, strong benefits and compensation packages, a commitment to make our communities better for future generations, a family-oriented culture, and our reputation as a firm with extremely knowledgeable professionals who serve as trusted advisors to our clients. Visit *********************** to learn more. Some of our many benefits include: Superior Health, Dental, Vision, and Rx Insurance Programs Condensed work schedule Generous base compensation and bonus plan Retirement Plans Generous paid time off and holidays Thomas & Hutton University - On-site provider of professional development hours and continuing education credits College tuition reimbursement programs (Graduate & Undergraduate) In-house Up and Ready Civil 3D Software Training Program We are an equal opportunity employer. Qualified minorities, women, veterans and individuals with disabilities are encouraged to apply. If you want to view the EEO is the Law poster, please choose your language: English - Spanish - Arabic - Chinese

The Engineering Technician will support Engineering efforts within Preciball, USA. The primary focus will be supporting day to day operations, while gaining an in-depth knowledge of ball manufacturing, damage detection and recognition, as well as ball inspection methods Responsibilities will include but not limited to: Becoming knowledgeable in the following areas: a. Detailed understanding of ball manufacturing b. Operational understanding of all mechanical inspection machines 1. Aviko Scanning Machine- Top Priority 2. Roller Sorting Machines 3. Vibratory Bowl Dyring Machine c. Operational knowledge of ball inspection equipment 1. Various diameter gauging devices 2. Roundness testing machines 3. Hardness testing machines 4. Surface finish machines 5. Recognition of damages and points of occurrence Becoming knowledgeable of overall operations and offer engineering solutions to improve safety and efficiency. Also participate and contribute in Supplier Development efforts to improve the supply base. Qualifications: -Entry level Engineer or Engineering Technology degree, or equivalent experience. -Proven ability to multitask and maintain process for multiple responsibilities. -Proven communication and interpersonal skills. -Experience in Microsoft Office (word & excel) a must. -Experience with ISO-9001:2005 Quality Managment system is a PLUS -Experience in problem solving methods such as "5-Why" is a PLUS -Experience with CAD or other drafting solutions is a PLUS -In depth knowledge of ball manufacturing is a PLUS, but not required.