Quality control technician jobs in South San Francisco, CA - 611 jobs

San Francisco Bay Area, California, United States Hardware Apple is looking for a world class display optical engineer to lead the design, development and qualification activities of the next generation display technology and products. Description This individual will serve as a focal point in managing new display technology development and drive the implementation of critical technology platforms to improve display performance, from design conception to hardware and experience prototyping, and to final products. You will be involved in system modeling to assist in design and validation. You will work with a diverse and multidisciplinary group of very hardworking colleagues. You will be a directly responsible individual and collaborate with multi-functional teams and suppliers to understand design tolerance and sensitivities, optimize system-level performance based on critical metrics, and validate system designs through engineering builds and design of experiments. A successful candidate needs to be comfortable with new technology, a flexible problem solver, meticulous in attention to detail, highly independent, and motivated to get results. You should be able to tackle problems outside of your respective technical area, have strong presentation and communication skills, and thrive in a hands‑on environment that values engineering excellence and innovation. You will be part of something big; come join us! Responsibilities Define display architecture, requirements along with actionable test/qualification plans Develop simulation models and hardware test vehicles Drive module qualification including issue failure analysis and corrective action Collaborate with system team to drive module specification and convergence Host regular supplier meetings to drive engineering activities to meet project milestones and convergence on any open issues Investigate new display technologies, perform detail tradeoff studies, and generate new approaches to further enhance display performance Minimum Qualifications Masters and a minimum of 5 years relevant industry experience Proficiency in optical design and simulation software for illumination (e.g., LightTools, Zemax OpticStudio Non‑Sequential, Speos) Proficiency with a data analysis and scripting language (e.g., MATLAB, Python, JMP) for modeling, simulation, and test automation Hands‑on experience with lab equipment for optical characterization (e.g., spectrometers, imaging colorimeters, goniophotometers) Preferred Qualifications Ph.D. in a related field Expertise in light source technology (eg mini‑LEDs, micro‑LEDs) Experience developing and implementing comprehensive test plans for optical system Familiarity with color science, color calibration, and display/lighting metrology standards Experience taking a hardware product from concept through to mass production Experience in building compelling hardware or experience prototypes Strong presentation and communication skills An eagerness to take on new challenges, learn new skills, and continually develop by staying open-minded & curious. Strong sense of personal ownership, with the ability to comprehensively handle tasks from start to finish independently At Apple, base pay is one part of our total compensation package and is determined within a range. This provides the opportunity to progress as you grow and develop within a role. The base pay range for this role is between $181,100 and $318,400, and your base pay will depend on your skills, qualifications, experience, and location. Apple employees also have the opportunity to become an Apple shareholder through participation in Apple's discretionary employee stock programs. Apple employees are eligible for discretionary restricted stock unit awards, and can purchase Apple stock at a discount if voluntarily participating in Apple's Employee Stock Purchase Plan. You'll also receive benefits including: Comprehensive medical and dental coverage, retirement benefits, a range of discounted products and free services, and for formal education related to advancing your career at Apple, reimbursement for certain educational expenses - including tuition. Additionally, this role might be eligible for discretionary bonuses or commission payments as well as relocation. Learn more about Apple Benefits. Note: Apple benefit, compensation and employee stock programs are subject to eligibility requirements and other terms of the applicable plan or program. Apple is an equal opportunity employer that is committed to inclusion and diversity. We seek to promote equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. Learn more about your EEO rights as an applicant . Apple accepts applications to this posting on an ongoing basis. #J-18808-Ljbffr

Job Requirements: Strong spoken and written English Proficiency and Comprehension. Strong teamwork skills Quality mindset and detail oriented Solid Hand/Eye Coordination MS Word and Excel Skills Capable of working with chemicals in accordance with training and work instructions and strictly adhering to safety requirements Relevant experience in a similar manufacturing facility. High School Diploma, GED, or equivalent job experience The ideal candidate will have four (4) years or more of experience working in a wafer fab cleanroom environment. Work is 100% Onsite Physical Requirements: Able to work in a cleanroom environment, wearing a full Bunny Suit plus PPE Able to work standing during shift in cleanroom 20/20 vision (corrected or natural) for short- and long-range viewing Able to work in close proximity to others and equipment. Ability to work overtime on short notice, if needed. Ability to work a compressed shift schedule C Shift: 6pm-6am Sunday through Tuesday, plus every other Wednesday ( Shift Differential Pay 15%)

Supermicro is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us. Job Summary: We are seeking a Production Technicianto perform incoming quality control (IQC) for electronic circuit assembly boards (PCBAs) and troubleshoot defective products to ensure they meet Supermicro's design standards and customer expectations. In this role, you will work closely with test engineers and production teams to diagnose and resolve issues while maintaining efficiency in a fast-paced production environment. This position involves working in a production setting with potential exposure to loud machinery, and candidates must be comfortable with physical tasks such as standing for extended periods. Overtime during weekdays and weekends may be required based on business needs. Essential Duties and Responsibilities: * Conduct visual inspections and functional testing for electronic assembly boards (PCBAs). * Perform incoming quality control checks and data entry to ensure product integrity. * Assist test engineers and supervisors in diagnosing and identifying root causes of failed boards to support continuous improvement. * Execute engineering change orders (ECO) and model change tasks as required. * Provide hands-on support on the production line when needed. * Collaborate effectively with cross-functional teams to maintain high-quality production standards. * Adhere to company policies, safety protocols, and standard operating procedures (SOPs). * Perform other tasks as directed by supervisors. * Be willing to work overtime and weekends as needed. Qualifications: * High school diploma or some college experience (technical certification is a plus). * Basic proficiency in English (written and verbal). * Experience with electronics and computer hardware is advantageous. * Minimum of 1-year experience in the electronics or computer industry. * Hands-on experience in production testing of PCBAs is a plus. * Familiarity with technical tools such as oscilloscopes, multimeters, or diagnostic software is beneficial. * Ability to work collaboratively in a team-oriented production environment. * Comfortable working in a physically active role, including standing for extended periods and operating in a loud production setting. * Candidates with less experience may be considered for a junior role (Production Operator), with on-the-job training provided. * This is a temp to hire position Physical Requirements and Work Conditions: The physical demands and work conditions described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: * Able to stand, sit, walk, bend, stoop, reach, lift, and carry items. * Perform tasks that require standing and walking for long periods up to entire shift. * Lift, carry, push and pull in an excess of 25lb and up to 40lbs. Able to utilize a "buddy system" for moving objects more than 50 lbs. (For applicable positions: Must be able to operate pallet jack and forklift efficiently and safely.) * Must be able to wear safety shoes, earmuffs or other required PPE as needed. * Primarily works indoors with controlled climate conditions. Salary Range $23.00/hr - $28.00/hr The salary offered will depend on several factors, including your location, level, education, training, specific skills, years of experience, and comparison to other employees already in this role. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation, such as participation in bonus and equity award programs. EEO Statement Supermicro is an Equal Opportunity Employer and embraces diversity in our employee population. It is the policy of Supermicro to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or special disabled veteran, marital status, pregnancy, genetic information, or any other legally protected status.

A global technology company is seeking a Hardware Engineering Manager in Sunnyvale, California. This hybrid role emphasizes leading a team to ensure high-quality hardware for networking products. Candidates should have a Bachelor's in Electrical Engineering or Computer Science, with 3+ years in hardware leadership and a strong customer focus. The position includes managing multiple projects and driving hardware quality improvements. Competitive compensation based on experience, ranging from $130,500 to $300,000 annually. #J-18808-Ljbffr

A construction safety company based in California is seeking a Traffic Control Associate responsible for managing traffic around work zones. Applicants must possess a valid California Driver's License and demonstrate strong interpersonal skills. The position involves coordinating traffic flow, setting up safety equipment, and ensuring the safety of all personnel involved. Potential candidates should have a high school diploma and experience in a similar role is preferred. We offer competitive wages and a robust benefits package. #J-18808-Ljbffr

Process Technician / 2-year W2-only Contract / Swing or Night Shift / Onsite in Fremont, CA. Responsibilities: Maintain 300mm Wafer tool processing in a safe, orderly and efficient manner in Class 10 cleanroom environment. Operations of process tools and metrology tools. Clear documentation and communication via email, IM, Excel spreadsheets, internal systems. Following BKMs and procedures accurately. Preparing and executing instructions from Engineers/management. Looking ahead to prep upcoming experiments in advance. Daily housekeeping of designated lab areas. Achievement, agility, honesty & integrity, inclusion & diversity, innovations & continuous improvement, mutual trust & respect, open communication, ownership & accountability, teamwork. Required Skills: 1-2 years of experience with the manufacturing of microchips/wafers. Experience with process and metrology tools. Multitasking. Efficiency / sense of urgency. Proficient in Microsoft Excel / Outlook / computer skills. Self-driven / motivated. Great attention to detail. Proven job stability. Timely and dependable. Pay for this position is based on market location and may vary depending on job-related knowledge, skills, and experience. As a contractor you may also be eligible for health benefits such as health, dental, and vision as well as access to a 401K plan. Applicants should apply via The Mice Groups Inc. website (******************* or through this careers site posting. We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates. Privacy Policy One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you've requested. The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information. The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website. The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to *******************

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

Job Title: Engineering Technician Duration: 3-6 month contract (with potential to extend and/or convert depending on performance) Schedule: Monday-Friday, 8:00 PM-4:30 AM + recurring weekend shifts Compensation: $55+/hr A local robotics startup client of Insight Global is seeking several dedicated Engineering technicians to work on-site at their San Francisco, CA location. Job Responsibilities: • Build and maintain our robot fleet involving complex mechanical assemblies and actuators, small gauge cable assemblies, and fine pitch SMT PCBs. • Bring up and troubleshoot robots using Linux and proprietary software tools. • Use CNC machines, 3d printers, and other machine tools to fabricate and rework components. • Track, maintain, and socialize robot fleet health using tools such as Jira. • Create work instructions and assembly processes to streamline assembly and bring-up workflows. • Use CAD tools to develop assembly fixtures and understand design intent. • Propose system and process improvements, and prepare reports, documentation, and presentations to summarize findings and recommendations. • Collaborate with cross-functional teams to resolve technical issues and improve processes. • Order, organize, and maintain inventory of materials, supplies, and tools. Required Experience: • 5 years of proven technical skills and hands-on experience with robots or related fields. • Experience building cable assemblies involving small gauge crimps and coaxial connectors. • Experience reworking PCBs including fine pitch SMT. • Experience fabricating parts including using CNC machines and 3d printers. • Proficiency in using CAD software and other engineering tools. • Strong analytical and problem-solving abilities. • Excellent communication and teamwork skills. • Attention to detail and accuracy in documentation and reporting. • Ability to work independently and manage multiple tasks. Apply today!

Want to make an impact? As a Quality Technician reporting to the Quality Supervisor, you'll be a key player in ensuring every candy we make is safe, consistent, and top-quality. You'll monitor production processes, inspect materials and packaging, verify procedures, maintain documentation, calibrate equipment, and ensure our formulations, nutritional info, and ingredient statements are accurate. Your work helps keep our products delicious and compliant every day. ***Position requires the ability to work overtime. As a result, it may require working varying start times, end times, and weekends dependent on business needs. Ways you will make a difference Inspects supplies, raw materials, WIP, and finished products to verify quality standards. Reviews formulas to ensure all processing parameters and procedures are in compliance. Samples and documents process data to meet product specifications. Verifies processing data and makes recommendations if necessary. Evaluates and approves all work in progress and finished products. Performs basic computer skills including but not limited to Windows, Spreadsheets, and Word Processing. Implements statistical methodology to analysis processing. Calibrates testing equipment periodically. Provides and assists in designing forms for the manufacturing departments. Reports all discrepancies to Quality Assurance leadership. Coordinates with Operations staff the successful disposition of non-conforming product. Supports internal audit programs. Inherent in each position is a general duty to maintain each respective work area in a safe and sanitary condition. Regular, predictable, full-time attendance is required as an essential function of this position. The employee may be required to perform other such duties within the scope of their employment as may be assigned. The employee must also possess the ability to take direction, follow instructions, work with others, follow work rules and schedules, focus on details, and work flexible hours as needed (including weekends). Skills that will make you successful To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS AND ABILITIES Proficiency with MS Office, including Word, Excel, and Outlook; Redzone, database and ERP system experience preferred. Strong understanding and commitment to food safety and quality; knowledge of HACCP and FSMA standards preferred. Ability to manage time and multitask successfully. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, and taste or smell work in progress and finished goods. The employee is occasionally required to sit; during product evaluations they are required to use hands to manipulate, handle, or feel objects, tools, or controls; and talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and color vision. The employee must ascend and descend stairs or climb on high platforms of up to 15 feet high, in order to perform essential functions and report to their respective workstation. The employee is occasionally required to reach with hands and arms, balance, stoop, kneel, crouch, or crawl. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently works near moving mechanical parts. The employee will be exposed to high heat (140F) for up to 10 minutes and low temperature (below 40F) to perform specific tasks. The employee occasionally works in outside weather conditions and is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals. The employee must have the ability to tolerate strong fruity, spicy, bold or pungent smells as part of routine QA checks. The noise level in the work environment is usually loud. Experiences that will support your success One year certificate from college or technical school; or two (2) to three (3) years related experience and/or training; or equivalent combination of education and experience. An equivalency of education could possibly fulfill formal degree requirements. At Ferrara, we're proud to support our employees by providing comprehensive benefits such as health insurance, dental insurance, a 401(k), and paid time off (PTO). Eligible employees may also receive an annual bonus based on company performance. Learn more about our benefits at *******************************************

JobID: 210689173 JobSchedule: Full time JobShift: Base Pay/Salary: Chicago,IL $118,750.00-$175,000.00 Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead at JPMorgan Chase within the Cybersecurity Technology and Controls, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, including Product Owners, Business Control Managers, and Regulators, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities * Ensure effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations * Develop and maintain robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals * Execute reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work * Proactively monitor and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance Required qualifications, capabilities, and skills * 5+ years of experience or equivalent expertise in technology risk management, information security, or related field, emphasizing risk identification, assessment, and mitigation * Familiarity with risk management frameworks, industry standards, and financial industry regulatory requirements * Proficient knowledge and expertise in data security, risk assessment & reporting, control evaluation, design, and governance, with a proven record of implementing effective risk mitigation strategies * Demonstrated ability to influence executive-level strategic decision-making and translating technology insights into business strategies for senior executives Preferred qualifications, capabilities, and skills * CISM, CRISC, CISSP, or similar industry-recognized risk and risk certifications are preferred #CTC

Figure is an AI Robotics company developing a general purpose humanoid. Our Humanoid is designed for commercial tasks and the home. We are based in San Jose, CA and require 5 days/week in-office collaboration. It's time to build. The Incoming Quality Technician will verify that incoming and in-process material meets Figure AI drawings and specifications. They will be responsible for the inspection of material and the coordination of MRB activities, including data input, reporting, and logistics associated with material dispositions. This person will also administer the calibration system, ensuring that measuring and test equipment is within its calibration due date. The Incoming Quality Technician will work closely with SQE to provide reports, charts, graphs, etc., to monitor and improve incoming material product quality. The successful candidate must have the ability to meet tight deadlines, possess strong interpersonal and communication skills, be detail-oriented, and be able to work independently. The candidate must establish and maintain a professional working relationship with line supervisors, operators, and other shop floor stakeholders Responsibilities Perform visual and dimensional inspection on supplied electronics PCBA (printed circuit board assemblies), EE components, and harness to ensure they meet quality standards, using tools like microscopes and calipers, and pin gauges. This includes checking for defects like solder flaws, incorrect component placement, wrong components, solder mask, conformal coating, cosmetic issues, and documenting all findings according to criteria per engineer requirements, IPC-A-610, IPC-A-620, and J-STD-001. The role also requires reporting nonconformities, collaborating with production and engineering teams to resolve problems, and maintaining inspection records. Document and relay nonconformance information following MRB process conduct first article inspection and generate first article inspection reports in compliance with ISO9001 (as required). Requirements High-school diploma or GED plus three (3) years of on-the-job experience in electronics assembly manufacturing. Comprehension of IPC-610, IPC-A-620, and J-STD-001 standards - certification preferred. Understand traceability (product, material and calibration) Ability to work within a team environment. 3-5 years of experience in a Manufacturing Quality Control environment Knowledge of ISO 9001:2000 or TS16949 is a plus Ability to read and interpret basic mechanical drawings Able to use basic measurement tools such as pin gauges, bore gauges, calipers, microscope, and micrometers. Proficient in Microsoft Office or Google Suite Must have command of the English language, both written and verbal Desired General use of Keyence, CMM, OMM, Faro Arm and Romer Arm Experience with digital X-Ray inspections. First Article Inspection Requirement Understanding basic statistical terms and techniques, how to plot data and how to recognize out-of-control conditions ASQ Certified Quality Inspector Certificate. The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

Quality Technician will report to the Receiving Quality team lead and have the final goal to support the development of business processes to ensure that Ryzen's Client's products and services provide a high level of quality that meets the defined standards and specifications and in the end, the customer expectations. You will be helping in establishing high quality standards and will ensure product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. You will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part and vehicle level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status in NPI, manufacturing, and services Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Qualifications Bachelor's degree with 6- 8 years of experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Experience with Root Cause Analysis, Problem Solving and Quality Control methods Must be familiar with Google suites (words, docs, sheets) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Electrical component (wire harness) inspection experience Previous experience in SAP and/or JIRA system Industry background and/or experience in; automotive, software, contract manufacturing, customer management Pay Rate: $35.00/HR - $45.00/HR

About Us: Toray Advanced Composites (TAC) is a leading supplier of advanced composite materials for the aerospace, sporting goods, motorsport, and industrial markets. You will find our thermoset composite products on nearly every satellite, space launch vehicle, unmanned aircraft, military and commercial aircraft in production today. TAC also provides composites materials to industrial and recreational applications including mountain bikes, medical prosthetics, and sports equipment. Our thermoplastic prepregs, known in the industry as Cetex , are found in a wide range of commercial and military aircraft, including large wing structures and interior applications like seats and galleys. Our Cetex products are available in unidirectional tape or fabric form in a variety of engineered thermoplastic resins including PEEK, PPS, PEI as well as a full line of performance thermoplastics including Nylon, PET, PC/ABS, HDPE, and PP. JOB TITLE: Quality Technician II REPORTS TO: Quality Supervisor SUMMARY OF FUNCTIONS: The Quality Technician II will support Toray's quality team in one or more phases of the lab. In this role, the Quality Technician II will uphold Toray's quality standards which are set in place by the organization, customers, and management. Roles and responsibilities are subject to change. Quality Technician Level Breakdown: Level Description III: Competent in 3 or more lab phases, or Mastery of 2 lab phases and competent in another. II: Competent in 2 or more lab phases, or Mastery of 1 lab phase and competent in another. I: Entry level to attain competency in 1 or more phases of the lab. MAJOR DUTIES AND REQUIREMENTS: Quality: 3 levels of QA lab technicians exist, broken up by competency in the lab phases. Technician roles are filled based on need, but cross-training is encouraged. General Knowledge: Familiarity with composite materials, specifically carbon fiber and fiberglass composites Knowledge of time and temperature-sensitive (TATS) materials Use of Microsoft Excel workbooks and Microsoft Access to record and report data Ability to read and follow written Lab Request instructions Communicate discrepancies or non-conformances to Supervisor and/or Quality Engineer Strong ethic regarding data integrity Usage of FIFO “first in, first out” for self-scheduling assignments Record and document work performed each day in a “pass down” email to the supervisor if working off shifts Layup Phase Technician: Support the Layup Phase with the following: Document incoming material traceability information into Toray's database Use of ply cutter to kit plies of prepreg required for panels Layup prepreg panels for acceptance testing per documented test plans Layup test coupons with resin films, foams, and other aerospace materials Program cures into the digital oven and autoclave and record the collected data Physicals Phase Technician: Support the Physicals Phase with the following: Use scales, calipers, and other devices to measure the size of prepreg/other samples Use ovens/furnaces to perform prepreg testing Use acids (acetone/NMP) to perform prepreg testing Visually or otherwise inspect prepreg specimens to outlined criteria Sample Cutting Phase Technician: Support the Sample Cutting Phase with the following: Knowledge of machining best practices for composite materials Familiar with industry-standard tolerances for coupon geometry Use calipers and micrometers to ensure cut coupons meet required tolerances Prepare samples through abrading, cleaning, and application of adhesive for testing Maintain coupon traceability throughout multiple machining operations Mechanical Phase Technician: Support Mechanical Phase with the following: Use calipers/micrometers to properly report the dimensions of test samples Ensure test coupons meet required tolerances Use Instron test frames to test specimens Able to use Blue Hill software to perform testing Perform mechanical tests on prepared samples to ASTM/other industry standards Troubleshoot minor issues with test setups/test frame configurations Apply strain gages to the surface of test coupons. FV/Density Phase Technician: Support FV/Density Phase with the following: Use calipers/micrometers/scales to properly report the dimensions of test samples Be familiar with the use of acids (sulfuric/nitric/MEK) to perform sample digestions Use ovens/furnaces to cure or perform burn-offs for testing Use of CEM microwave digestion system to perform acid digestion Use of Pycnometer and processes to perform density testing Analytical Phase Technician: Support Analytical Phase with the following: Use calipers/micrometers to properly report the dimensions of test samples Use of ovens/furnaces to perform testing Ensure test coupons meet required tolerances Use of Rheometer and Dynamic Mechanical Analysis to perform testing to ASTM/other industry standards Use of Thermal Mechanical Analysis (TMA) to perform testing to ASTM/other industry standards. Use of Differential Scanning Calorimetry (DSC) to perform testing to ASTM/other industry standards. Use of High-Performance Liquid Chromatography (HPLC) to perform testing to ASTM/other industry standards. Use of Fourier-Transform infrared spectroscopy (FTIR) to perform testing to ASTM/other industry standards. Perform required routine validations on equipment Troubleshoot minor issues related to equipment configurations and sample loading. Dimensional Inspection Phase Technician: Support the Dimensional Inspection Phase with the following: Inspection of incoming and outgoing products to engineering specifications using basic test and measuring equipment Ability to work with handheld gauges, such as calipers, micrometers, height gauges, pin gauges, thread gauges, etc. Ability to work with Coordinate Measurement Machine (CMM) and Portable Coordinate Measurement Machine (PCMM). Knowledge of PCDMIS CAD ++ inspection software (preferred) Familiar with CAD models (IGES, Step, Solidworks, Catia) Ability to read and interpret blueprints and know definitions of critical, major, and minor characteristics using (ASME Y14.5) Geometric Dimensioning and Tolerancing (GD&T) discipline Ability to measure parts and determine if they are meeting print specifications Inspect first part against each measurement as indicated on print. Verify acceptable tolerance. Indicate completed inspection on the corresponding inspection record Experience with engineering drawings & tolerance, standards & specifications in accordance with (ASME Y14.5) Geometric Dimensioning and Tolerancing (GD&T) Choose and check the calibration of the inspection equipment to be used Perform visual and dimensional inspection of purchased parts, tight tolerance machined parts, stamped and fabricated parts, components, assemblies, and materials. Perform first article inspection, incoming, in-process, and final inspections on new and revised parts Generate, distribute, and file inspection reports as required Document non-conforming products when detected. Attach Red Tag and/or Red NC tags to the non-conforming product Timely completion of all paperwork associated with the position including NC tags Complete and maintain all documentation per customer and/or internal requirements Responsible for the completeness and accuracy of all work performed Safety: Follow safety procedures for PPE (personal protection equipment) Properly dispose of hazmat waste Maintain a clean working environment through a “clean as you go” mentality EXPERIENCE AND/OR EDUCATION REQUIREMENTS: Minimum of high school diploma or equivalent At least 2 years of experience working with composites or productions or quality Must be capable of lifting up to 25 lbs. Basic computer skills (MS Suite) required Must be able to follow written and verbal instructions for machine operation Must be able to communicate clearly (written and verbally) in English Must be able to follow written and verbal instructions by reviewing SOPs and customer specification Understand basic laboratory terminology Understand weights and measurements in metrics and standard units Ability to operate calipers, micrometers, and scale Able to work and communicate as a team Maintain work areas in a neat, orderly, and safe manner Excellent attendance; ability to work overtime, weekends, and off shifts when needed BENEFITS AND PERKS: Comprehensive Medical, Dental, and Vision Insurance Plans FSA/HSA Plans Available Paid Holidays Gym Membership Tuition Reimbursements 401(k) Plan with Company Match Paid Time Off Employee Engagement Events Referral Bonus Program Life Insurance and AD&D Coverage Short-Term and Long-Term Disability Insurance Parental Leave & Paid Family Leave Plus much more! COMPENSATION: $25.00-$36.00/hr DOE Toray Advanced Composites employment practices offer equal employment opportunity and does not discriminate against its employees or applicants because of race, color, religion, sex, pregnancy, national origin, ancestry, age, marital status, physical or mental disability, medical condition, sexual orientation, or any other basis prohibited by law. Equal employment opportunity will be extended to all persons in all aspects of the employer/employee relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall, and termination.

TekWissen provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each clients requirements and span the services spectrum from Application Development/Maintenance, testing, IT Consulting & staffing for IT Infrastructure Management through strategic consulting and industry oriented Business Process. Our end-to-end Business Process as a Service (BPaaS) solutions support complex, high-value, knowledge based work. Combining applications, platforms, infrastructure, knowledge processes, and domain expertise allows us to deliver greater efficiencies and innovative business capabilities. Qualifications Position:Quality Technician III Location:San Jose,CA Pay Rate : $30.00 - $35.00/hr. Essential Duties & Responsibilities: * With limited supervision, assures policies, procedures, inspection techniques and quality plans conform to established standards * Performs complex analyses and tests of raw materials, packaging materials and/or finished products from manufacturing to ensure quality standards and compliance to customer and regulatory requirements * Monitors performance of inspectors and institute corrective action when necessary * Trains new inspectors and department personnel on policies, procedures, inspection techniques and quality plans * Assures gauges are within the current calibration cycle and are properly used and stored. Arranges for repair of gauges as needed. * Participates in design of experiments and process capability studies * Reviews Statistical Process Control (SPC) data. Maintains integrity of SPC data by correcting input errors and follows up with retraining of inspectors if needed. * 4+ years related experience and/or training * Experience certifying typical metrology equipment such as calipers, micrometers and computer controlled gauging equipment * General knowledge of blue prints, engineering specifications interpretation, inspection using measuring and test equipment, including CMM, FARO ARM and measurement techniques, geometric dimensioning and tolerance and quality calibration processes required. Additional Information If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest, please call me ASAP at ************ Thanks & Regards, Monika

GENERAL PURPOSE Under general supervision, marks parts and performs pre-packing functions on castings to assure conformance of casting to customer requirements following established safety and operating procedures in accordance with quality standards. Ensures that documentation, tooling and parts are correctly matched to paperwork. ESSENTIAL FUNCTIONS 1. Inspector Visual (FID) Objective: To set up and perform marking, pre-packing, and packing functions on castings conforming to visual and dimensional specifications on technique cards. Essential Job Functions: • Follow established housekeeping and safety practices to maintain the quality of the work. • Demonstrate ability to log on main computer system, extract information, log time, enter inventory amount and forward to next operation. • Programs, designs tooling, and performs set-ups of pin marking equipment, and offers instruction to lesser skilled people. • Transports castings into and out of FID, responsibility for verification of proper paper work for the area. • Understands the Divisional Quality Policy, identify the location of the QCP'S, Quality System Manual, and OPC's and display a willingness and interest to learn through on the job training. • Identifies, marks castings, and inventories area stamps as required by specification, instructions, and/or tech cards. • Counts parts to ensure proper number of castings are sent to customer. • Completes all necessary paperwork and records as required and verifies correct procedures of those lesser skilled. • Offers procedural improvements to Supervisor and assists other personnel as may be required. • Responsible for calibration of all equipment in area (maintains appropriate records), and any discrepancies in counts or improper stamps, following QCPs and OPCs, or out of date marking conditions. • Identifies and marks castings as required by specification, instructions, and/or tech cards. • Reports any discrepancies, or out of date marking condition to supervisor. • Requires ability to operate pin marking equipment, vibro-etcher, and electro etcher. • Has the ability to do most of all marking jobs without instructions from the area lead. • Able to maintain an excellent part marking proficiency with zero tolerance for error. • Successfully comply with Customer Acceptance Criteria on a consistent basis. • Demonstrate the ability to research pertinent data to support the generation of accurate tech cards for the department. • Demonstrate an understanding of all paperwork associat ed with the job and be able to explain why this paperwork is necessary and demonstrate a high rate of accuracy in completing all required documents, including scrap/rework tickets, PCAR's, DCAR's, travelers, and daily "WIP" reports. • Has ability to pack castings according to customer requirements, without direct supervision, in a manner that will preclude castings from being damaged in shipment. • All other duties assigned. Qualifications: • Experience and/or training are included in considerations. • Ability to communicate effectively in English, both verbally and in writing, read, follows and interprets instructions on technique cards, code sheets as well as other verbal or written instructions. • Ability to perform basic mathematical calculations. • Ability to use simple to complex measuring devices and fixtures. • Physical ability to perform the essential job functions.

We engineer solutions for the world's most critical missions. We serve customers in the defense and aerospace markets. Seeking a career that offers challenging, diverse projects and opportunities? Looking for a position with a company that offers long-term professional advancement? Searching for a place that values a diverse, team-based environment? One that values YOU. You will report directly to our Quality Manager, and you'll work out of our San Jose, CA location on an On-site, work schedule. The Inspector, as part of our Quality Assurance Group in San Jose, CA, is responsible for incoming mechanical and piece part inspection for MIL-STD-38534 microwave hybrid circuits. The position requires working closely with Production, Engineering, and Purchasing, with a focus on incoming inspection. In order to do so, we expect the person in this role to partner with fellow inspectors and their direct supervisor. Previous machining experience is a plus. You will be working with an inspection team whose purpose is preventing defective materials and parts from being used in manufacturing. Responsibilities Follow inspection plan documents to verify acceptance or rejection of parts and materials Interpret Documents and Drawings per ASME Y14.5 for inspection requirements Use of mechanical inspection tools to measure machined & plated parts with complex geometries and fine tolerances Perform first article inspection on machined & plated parts in accordance with AS9102 industry requirements Evaluate test or analysis data against specifications to determine acceptance Interpret workmanship standards and identify visual defects and anomalies Perform various types of data entry as part of product acceptance completion or job tracking Maintain accurate & detailed inspection records Communicate effectively with supervision and internal customers in person, on the phone, and through email Proactively address and resolve issues Minimum: High school Diploma/GED 1+ years' experience with low & high power microscope inspection, basic dimensional inspection tools: drop gages, plug & block gages, calipers, vernier micrometers 1+ years' experience reading and interpreting documents and drawings Experienced with MS Office Suite (Word, Excel, Outlook) This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a “US Person” under US export laws (or eligible for approval under a U.S. Government export license) Preferred: High school Diploma/GED 1+ years' experience with low & high power microscope inspection, basic dimensional inspection tools: drop gages, plug & block gages, calipers, vernier micrometers 1+ years' experience reading and interpreting documents and drawings Experienced with MS Office Suite (Word, Excel, Outlook) This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a “US Person” under US export laws (or eligible for approval under a U.S. Government export license) For California, the annual base salary range is $51,000-$63,700. Please note that this salary information serves as a general guideline. Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations. BENEFITS OF WORKING FOR HONEYWELL In addition to a performance-driven salary, cutting-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), Paid Holidays, and this role may be eligible for a 9/80 schedule. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: December 12, 2025 ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here (********************************

Full-time Description To assist in Inspection Lab activities allowing it to perform seamlessly while providing accurate, repeatable measurement results that fully support the needs of our internal and external Customers Requirements 1) Working with peers to help coordinate and schedule Inspection Lab functions so all requirements are accomplished in the most efficient manner possible. 2) Perform first piece, in-process, and final inspections and document as required 3) Program and operate the CMM & Faro Arm 4) Crosstrain on all lab equipment to have a functional knowledge and operational ability of the equipment listed above 5) Be a subject matter expert on the use of all conventional measuring equipment, ability to design and develop specialty gauging, along with a highly developed understanding of GD&T 6) Work with the QA Manager and Quality Engineer and other Inspectors to perform capability studies, Gauge R&R studies, and other statistical techniques. 7) Supply the necessary data for AS9102 and PPAP submissions. 8) Assist in calibration activities to ensure all are accomplished as scheduled Research, and suggest upgrades/alternatives/additions to the existing lab equipment while also justifying the procurement by demonstrating the appropriate ROI

Work Schedule Second Shift (Afternoons) Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Laboratory Setting, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Standing for full shift, Strong Odors (chemical, lubricants, biological products etc.), Will work with hazardous/toxic materials Job Description Location/Division Specific Information: Sunnyvale, CA Shift: Monday - Friday 2:00PM-10:30PM with overtime and weekend hours as needed As part of the Chromatography and Mass Spectrometry Division (CMD), the Sunnyvale, CA site focuses on developing and delivering the highest quality chromatography solutions in the industry. How Will You Make an Impact?: Work in a team-based environment within a manufacturing lab responsible for synthesizing and testing ion exchange media used in chromatography consumables. A Day in the Life: Testing of resin products on unique instruments to meet customer demand. Record and report test results accurately and maintain proper documentation. Complete production work-orders according to established procedures. Follow corporate quality policy to ensure high-quality standards. Follow safety requirements and actively participate in safety improvement activities! Maintain a clean and organized laboratory environment. Education: High school diploma or equivalent required. Experience: Required: Minimum of 1 year of work experience in a manufacturing, operations, production, lab setting or related field Knowledge, Skills, Abilities: Knowledge of Good Laboratory and Manufacturing Practices and standards. Good mathematical, problem-solving, and organizational abilities. Excellent verbal and written skills Read and understand written procedures (SOPs) and follow verbal instructions. Familiarity with hand tools regularly used (wrenches, torque drivers, tweezer, etc.) PC literate and have experience with spreadsheet and database software. Knowledge of Chromatography software and chemistry experience a plus. Physical Requirements / Work Environment Lift and/or move up to 40 pounds. Regularly required to sit, stand; walk; use hands & fingers to handle & feel. Visual abilities to detect small components and particles. Exposure to toxic or caustic chemicals, fumes or airborne particles. Occasionally exposed to moving mechanical parts and moderate noise level. PPE requirements: lab coat, Safety glasses, gloves, face shields, & safety shoes (all company provided.) P95 Mask in the areas that have exposure of solvent fumes What We Offer Compensation Competitive Hourly Pay Rate Additional shift differential for 2nd shift and 3rd shift positions Annual performance-based bonus Annual merit performance-based increase Excellent Benefits Benefits & Total Rewards | Thermo Fisher Scientific Medical, Dental, & Vision benefits-effective Day 1 Paid Time Off & Designated Paid Holidays Retirement Savings Plan Tuition Reimbursement Employee Referral Bonus Career Advancement Opportunities Compensation and Benefits The hourly pay range estimated for this position based in California is $21.42-$27.00. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Shift: 1st shift, Monday-Friday, Standard working hours Duration: 12 Months Pay range: $25.00 Hourly - $25.00 Hourly Onsite Job The Formulations Lab Wash Technician supports the manufacturing process by cleaning, sanitizing, and preparing lab equipment and materials used in buffer and reagent production. This role ensures all cleaning procedures meet cGMP and safety standards, playing a critical role in maintaining a clean and compliant lab environment. Key Responsibilities: •Clean and sanitize stainless steel tanks, glassware, utensils, and other lab equipment according to SOPs and cGMP requirements •Operate and maintain washers, autoclaves, and other sterilization equipment •Prepare tanks and materials for sterilization, including wrapping and loading/unloading from the autoclave •Assist in routine preventive maintenance and minor troubleshooting of washroom equipment •Transport clean equipment and materials to appropriate staging areas for use in production •Maintain accurate cleaning logs and documentation •Follow safety procedures when working with cleaning agents and potentially biohazardous materials •Notify supervisor of any damaged equipment, procedural deviations, or safety concerns •Maintain stock of cleaning supplies and request resupply as needed •Perform other duties as assigned Minimum Requirements / Qualifications: •High school diploma or equivalent required •Previous experience in a laboratory, pharmaceutical, or manufacturing environment preferred •Ability to follow written and verbal instructions precisely •Strong attention to detail and good documentation practices •Ability to lift up to 50 lbs and work on feet for extended periods •Comfortable working in a cleanroom or controlled lab environment Non-Negotiable Hiring Criteria: •Must comply with GMP, QSRs, ISO, and IVD regulations at all times •Ability to read, write, and understand English instructions •Basic math skills for measurements and inventory counts •Willingness to work in an environment with chemical and biological materials •Basic computer skills;familiarity with Microsoft Outlook and Excel preferred Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.