Quality control technician jobs in Taylor, MI

contract( 6-12 months) with possible extension Pay Rate $26/hr on w2 with Benefits Working schedule - 2-2-3 working structure - (2 days on, 2 days off, 3 days on, 2 days off) Requirements: Associate degree or higher from an accredited college or university with a major in chemistry, engineering, or related science Valid Michigan Driver's License Responsibilities: Collect field samples of wastewater, sludge, polymer, etc. from various process areas of the Plant and the outfall, and perform chemical, microbiological, toxicological, and physical analyses that include reagent and media preparation, instrument operation, calibration, maintenance checks, and quality assurance/quality control (QA/QC) Become knowledgeable in laboratory analyses and treatment processes. Become proficient in training new hires in process analyses and sampling. Contribute to the record-keeping and reporting of laboratory data, regulatory reporting, operations reports, plant meetings, etc. Validate accurate readings from monitoring equipment, maintain analyzers and perform analyzer reagent change/replenishment. Work Night and Day shifts as assigned. Work in an industrial setting supporting 24-hour operations. Support a large team where needed with a high degree of flexibility. Precisely and diligently follow complex procedures and guidelines. Work overtime if needed to achieve compliance and support operations. Communicate frequently with team members and other units across the organization about the process, equipment, or potential problems. Physical Requirements: This position requires the ability to climb, bend, twist, carry, stack, push, pull and other efforts requiring considerable physical strength. This position also requires the ability to lift a minimum of fifty (50) pounds, walk, stand, or work for long periods of time, demonstrate normal color perception, hear audible alarms, detect abnormal equipment sounds, visually inspect equipment and processes at any time of the day or night.

Quality Technician

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title Quality Tech Summary The successful Coordinate Measuring Machine (CMM) Programmer is one that is conscientious, detail orientated, and a self-starter able to work from a verbal or written instruction. They are committed to quality, precision, and timeliness in their deliverables. These deliverables are achieved while maintaining a safe and organized working environment. Job Description Final and in process inspection of tooling, components, and prototype parts using CMM and various gauges as required Ability to program and operate Zeiss CMM using Calypso software Ability to read blueprints and understand product specifications and requirements Ability to perform measurements of precision components to ensure specifications are met Ability to perform general shop math Ability to measure close tolerances Completion of customer inspection reports per instructions and requirements Performs preventive maintenance tasks as required Required Skills and Education High School Diploma About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

Job Title: Quality Technician - Injection Molding Company: Atomic Industries Reports To: Quality Manager Atomic Industries is reinventing how the world makes things. From cars and aerospace systems to medical devices and packaging, most physical goods begin life in a mold or are shaped by a manufacturing tool. Producing these tools has always been slow, manual, and dependent on scarce expertise, taking weeks or months. We're changing that. At our Detroit headquarters, we combine the industrial DNA of America's manufacturing heartland with the speed, intelligence, and precision of Silicon Valley. Our AI-driven platform tackles the hardest problems in geometry, process planning, and fabrication, collapsing production timelines from months to days and soon, minutes. We don't just build software; we run a fully operational factory where our technology produces production-grade tooling every week, enabling tight feedback loops and rapid iteration. Backed by top-tier investors, we're restoring speed, flexibility, and capability to the American industrial base. Our mission is to make manufacturing as agile and scalable as the digital world, and in doing so, rebuild the infrastructure of the physical economy. Position Overview We're seeking a detail-oriented and dependable Quality Technician to support quality control and inspection across our injection molding operations. You'll be on the floor inspecting parts, maintaining records, and working closely with process engineers and toolmakers to ensure every part meets Atomic's exacting standards. This is a key hands-on role as we scale high-volume production and build out our ISO-compliant quality systems. Key Responsibilities Perform visual and dimensional inspections of molded parts (first piece, in-process, and final) Use precision measuring tools (calipers, micrometers, height gauges, etc.) Assist with part qualification processes: FAI, PPAP, capability studies Record and maintain accurate inspection data and non-conformance reports Support containment, root cause analysis, and corrective actions Calibrate and maintain inspection tools per Atomic's calibration program Collaborate with operators, engineers, and quality manager on continuous improvement Follow and enforce safety and cleanliness standards on the shop floor Qualifications 2+ years of experience in a quality role in injection molding or precision manufacturing Proficient in reading technical drawings and GD&T Familiar with ISO 9001 quality systems and basic quality documentation Strong attention to detail and documentation discipline Comfortable using Microsoft Excel, Google Sheets, and quality tracking systems Bonus: experience with digital inspection equipment (CMM, vision systems) Work Environment Fast-paced, collaborative production floor Hands-on engagement with operators, engineers, and software teams Opportunity to grow into Quality Engineering or leadership roles as Atomic scales What You'll Get Competitive pay, benefits, and equity opportunity Exposure to next-gen manufacturing systems A seat at the table in building quality systems from the ground up

Quality techs are needed at a brand new Automotive facility in Lake Orion. . You have to be able to use measuring devices like micrometers and calipers, gage the parts, report them and make sure production is running smoothly. At least 1 year of experience. Split shift and afternoon shift available. 1:30pm-10pm Monday-Friday at $18/hr Respond to this add or call ************.

About Rhino Tool House: Our mission is to identify and deliver the world's most innovative industrial solutions. We provide superior service, local expertise, and a high degree of responsiveness to empower our customers to be more productive, build a better-quality product, and maintain a safe environment for their workers. Job Description: The Quality Technician is responsible for performing inspections, tests, and audits to ensure products and processes meet established quality standards. This role works closely with production, engineering, and operations teams to identify nonconformities, assist in root cause analysis, and support continuous improvement initiatives. Key Responsibilities: · Perform incoming, in-process, and final inspections on parts, assemblies, and finished products. · Verify products meet specifications by using precision measuring instruments (calipers, micrometers, gauges, etc.). · Document inspection results, maintain quality records, and prepare reports. · Assist in root cause analysis and corrective/preventive action activities. · Support calibration and maintenance of inspection tools and equipment. · Ensure compliance with company procedures, ISO standards, and customer requirements. · Collaborate with production teams to resolve quality issues in a timely manner. · Participate in continuous improvement, 5S, and lean manufacturing initiatives. · Escalate quality concerns and recommend improvements to reduce defects and scrap. Qualifications: · High school diploma or equivalent required; technical certification or associate degree preferred. · 1-3 years of experience in quality inspection or quality assurance within manufacturing or industrial environments. · Knowledge of ISO standards, quality systems, and inspection processes. · Proficient in using measurement tools (calipers, micrometers, height gauges, etc.). · Basic understanding of engineering drawings, GD&T, and specifications. · Strong attention to detail, accuracy, and problem-solving skills. · Proficiency with Microsoft Office; experience with ERP/QMS software a plus. · Strong communication and teamwork abilities. Physical Requirements: · Ability to stand, walk, bend, sit, and lift up to 50 lbs. as needed. · Comfortable operating forklifts, pallet jacks, and other warehouse equipment. · Work in a manufacturing / warehouse environment with varying temperatures and noise levels. · Overtime varies depending on the needs of the business

Our mission is to identify and deliver the world's most innovative industrial solutions. We provide superior service, local expertise, and a high degree of responsiveness to empower our customers to be more productive, build a better-quality product, and maintain a safe environment for their workers. Job Description: The Quality Technician is responsible for performing inspections, tests, and audits to ensure products and processes meet established quality standards. This role works closely with production, engineering, and operations teams to identify nonconformities, assist in root cause analysis, and support continuous improvement initiatives. Key Responsibilities: · Perform incoming, in-process, and final inspections on parts, assemblies, and finished products. · Verify products meet specifications by using precision measuring instruments (calipers, micrometers, gauges, etc.). · Document inspection results, maintain quality records, and prepare reports. · Assist in root cause analysis and corrective/preventive action activities. · Support calibration and maintenance of inspection tools and equipment. · Ensure compliance with company procedures, ISO standards, and customer requirements. · Collaborate with production teams to resolve quality issues in a timely manner. · Participate in continuous improvement, 5S, and lean manufacturing initiatives. · Escalate quality concerns and recommend improvements to reduce defects and scrap. Qualifications: · High school diploma or equivalent required; technical certification or associate degree preferred. · 1-3 years of experience in quality inspection or quality assurance within manufacturing or industrial environments. · Knowledge of ISO standards, quality systems, and inspection processes. · Proficient in using measurement tools (calipers, micrometers, height gauges, etc.). · Basic understanding of engineering drawings, GD&T, and specifications. · Strong attention to detail, accuracy, and problem-solving skills. · Proficiency with Microsoft Office; experience with ERP/QMS software a plus. · Strong communication and teamwork abilities. Physical Requirements: · Ability to stand, walk, bend, sit, and lift up to 50 lbs. as needed. · Comfortable operating forklifts, pallet jacks, and other warehouse equipment. · Work in a manufacturing / warehouse environment with varying temperatures and noise levels. · Overtime varies depending on the needs of the business

Job DescriptionKey Responsibilities Ensure error-proofing systems are active and not bypassed without approval Issue and post Quality Alerts for customer-reported issues Verify current End-of-Line (EOL) inspection processes are posted and followed Perform product and workstation audits to ensure quality compliance Track and report EOL defects using Excel Audit reject tables and ensure supplier defects are properly tagged and placed in Quality Hold Partner with SQEs and Production Supervisors to address customer concerns and maintain containment Support Quality Engineers with root cause investigations and problem-solving Qualifications Associate degree in Quality, Engineering, or related field preferred (or equivalent experience) Industry and product knowledge preferred; DMOS experience a plus Strong problem-solving and communication skills Proficiency in Microsoft Excel and basic computer applications High attention to detail; ability to read prints/specifications a plus #TECH123 By providing your mobile number, you consent to receive text messages from Talent Strategy regarding your job application, interviews, and employment updates. Standard messaging rates may apply. Consent is voluntary and is not required to apply. You can opt out anytime by replying STOP or contacting us directly. View our Privacy Policy at **************************************

Responsible for Day-to-Day Quality activities and inspection operations, quality data requirements, and customer special measurement, reporting, or record requirements. Assist in the decision-making process regarding measurement or gaging of product characteristics, inspection planning, and/or reporting. Responsible for the calibration system and related documentation. Reports to the Quality Manager in matters of technical authority and responsibility. Rotate duties from each quality area to become proficient, and maintain proficiencies in all areas. Principle Responsibilities Uphold quality standards, concepts, practices and maintain customer satisfaction Assist in the development of processes to ensure quality requirements have been satisfied Identify, document and report non-conforming products or workmanship Maintain rework and scrap operating metrics Maintain staging and holding areas for inspection and non-conforming products respectively Calibration of inspection and measurement equipment using established guidelines Perform incoming receiving inspection on purchased special and standard components Perform PPAP analyses on incoming products Other tasks as deemed necessary by the Quality Manager Skills Required Basic computer and CAD knowledge Familiarity with the use of precision measuring equipment such as micrometers, calipers, height gage, optical comparator, hardness testers, surface finish tester, and CMM (open DMIS) Able to read blueprints and interpret G.D. & T. Understanding of ISO-9001:2015 standard Well organized Attentive to detail Strong communication skills. Proficient with Microsoft Office and ERP systems Education High school graduate or equivalent. Associates degree in Metrology and Calibration or similar technical field desired but not essential. Work Experience 2 - 5 years or more of related experience. Privacy Notice for California Residents P.C.S. Company (“PCS”) complies with the California Consumer Privacy Act (“CCPA”), California Privacy Rights Act (“CPRA”), and other applicable privacy laws. We may collect the following categories of personal information for purposes of the application and hiring process: name and contact information (phone number; mailing address; email address(es)); education and qualifications; employment history and experience; LinkedIn profile; and other information voluntarily provided by the applicant. Under the CCPA and CPRA, California residents have the right to know, correct, delete, and/or limit the use of certain information collected by PCS. For further information, see our full privacy policy at PCS Company - Privacy Notice for California Residents (pcs-company.com). If you have any concerns, please send an email to ******************.

The Quality Technician is responsible for performing inspections and ensuring compliance with customer and industry standards in a high-precision manufacturing environment. This role requires strong attention to detail, proficiency with measurement tools, and the ability to interpret technical documentation while supporting production and quality objectives. Key Responsibilities: Inspection & Measurement Perform dimensional and visual inspections on machined components using precision instruments (micrometers, calipers, height gauges, CMM). Verify parts against engineering drawings and GD&T requirements. Conduct First Article Inspections (FAI) per AS9100 standards. Document inspection results accurately in quality records. Quality & Compliance Ensure adherence to AS9100 and customer-specific requirements. Maintain calibration of measurement tools and equipment. Assist in root cause analysis and corrective actions for nonconformances. Support internal audits and continuous improvement initiatives. Collaboration Work closely with machinists and quality team members to resolve quality issues. Communicate inspection findings clearly and professionally. Qualifications Experience: Minimum 3+ years in quality inspection, preferably in aerospace or precision manufacturing. Technical Skills: Proficiency with precision measurement tools and CMM operation. Knowledge: Strong understanding of GD&T and AS9100 requirements. Certifications: AS9100 familiarity preferred.

Description: Our company specializes in manufacturing re-usable plastic packaging and is a leader in the thermoforming industry. We are currently looking for motivated individuals to join our team as a Quality Technician. Quality Technicians are in responsible for supporting the Quality Manager and production team to ensure parts are made to customer specifications. Technicians will utilize the MES to record their testing. Reports to: Quality Manager Shift: 3:30 PM - 2:00 AM Monday - Thursday Responsibilities: Assist Quality Assurance and Production staff by providing expertise to resolve quality issues Inspect and validate incoming parts from external companies Use hand tools such as tape measure and micrometers to inspect and test internally produced components/parts to ensure quality and system requirements are met Understand quality tolerance and GD&T Qualifications: Previous experience a quality position Strong Computer Skills Strong Organization Skills Familiarity with plant tools and equipment Strong troubleshooting and critical thinking skills Ability to Lift up to 50 pounds Ability to stand for 8+ hours Ability to thrive in a fast-paced environment Benefits: Starting pay: $19.00/hr plus .75 shift premium Health, Dental, Vision, Life Insurance after 60 days 401k with 50% employer match up to 6% after 90 days Paid Time Off, Holiday Pay, Paid Sick Leave Career advancement opportunities

Quality Technician Shift: 1st, 2nd, 3rd The Quality Technician uses specialized tools, skillsets, software and other implements to carry out quality activities at the direction of the quality supervisor. Technical activities like gaging parts, analyzing process capability/statistical process control data and controlling documents, gages and other vital records are just a few examples of what falls within the purview of the quality technician. ESSENTIAL FUNCTIONS: Collects, records, and disseminates data and information specific to quality functions such as Layered Process Audits, Document Control, Gage R&R and similar Responsible for updating production floor documents with performance data and distributing revised documents to the appropriate work centers/areas Coordinates with external vendors and suppliers for quality related activities such as calibration services, acquisition of certified standards, and other tasks as deemed necessary Assists in root cause analysis, corrective/preventative action implementation and identifying general continuous improvement opportunities within the scope of their responsibilities 5% Local travel; approximate 20-mile radius Additional duties with similar responsibilities may be assigned as necessary Requirements PHYSICAL DEMANDS/ENVIRONMENTAL CONDITIONS: The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Able to stand/walk for the duration of shift (8+ hours) Able to lift up to 40lbs unassisted Able to perform frequent repetitive motions Able to withstand noisy environment Work station is in a shared and open environment TRAVEL REQUIREMENTS: 5% Local travel; approximate 20-mile radius EMPLOYMENT REQUIREMENTS: High school diploma or GED 3-5 years experience higher level of self-motivation and practical competence in the areas and activities for which they are responsible An intermediate understanding of quality standards, documentation and practices is also required Depending on the duties assigned, familiarity with specialized software such as Access, Minitab, Gage Track, QAD and others may also be necessary Reliable transportation Proficient in Microsoft Office Suite Able to read, write and speak English

Job Description Coplas Inc. an affiliate of Tiercon Corp. is an automotive supplier committed to the design, manufacture and assembly of quality exterior trim and assembled systems used as original equipment in the automotive market. Headquartered in Sterling Heights Michigan, Coplas employs approximately 50 employees. Coplas is seeking knowledgeable, self-directed, experienced and hardworking individuals interested in the automotive industry as a Quality Technician. Job Summary & Reporting Structure: Reporting to the Assistant Quality Manager or designate, the Quality Team Leader is responsible for ensuring quality requirements on the production floor are met. They will be responsible for maintaining workflows in production by monitoring steps of the process; training production employees, correcting quality concerns and at all times ensuring the ongoing adherence to the policies and procedures outlined in the ISO9001:2015 AND IATF 16949 Quality System and encouraging continuous improvement wherever possible. Responsibilities: Responsible for the quality of products in accordance with Company Quality Policy and Objectives Perform duties that reflect compliance to Company's Quality Management System (QMS) as recorded in the organization's Quality Manual Participate in PPAP, PFMEA, Control Plans and Gauge R&R Demonstrate conformance to regulations recorded in supplied Employee Handbook Perform quality inspection duties (first/last off, in process inspections) Train new and existing employees Maintain all controlled document files and test records in a timely and accurate manner Visually inspect produced parts for defects and reports flaws immediately to management Measure and check fixtures, record data in spreadsheets. Perform data analysis to ensure accuracy of production requirements. Disposition nonconforming parts into appropriate container to prevent contamination of finished goods Detect and report machine malfunctions promptly to management and immediately notify Supervisor or Quality of all discrepancies to established quality checks (ie, sample boards, inspection instructions, Quality Alerts, etc.) Package and transports produced parts as needed Participate in team problem solving activities (ie, 8D's, communication meetings, etc.) Responsible for following all internal and OSHA required safety procedures Resolve problems by analyzing data, investigate issues, identify solutions, recommend corrective action in accordance with continuous improvement initiatives Track and submits statistics on the cost of poor quality Track performance of layered audits (e.g. track number of audits completed) Troubleshoot equipment problems to ensure quality and efficiency Able to stand for long periods and lift up to 45 pounds Promote continuous improvement in all areas Other duties as assigned ISO9001:2015 AND IATF 16949 duties as required Qualifications: Demonstrated working knowledge in PPAP, PFMEA, Control Plan & Gauge R&R High School Diploma or Equivalent work experience at minimum 2 years prior work experience in plastics or automotive industry is an asset Manufacturing experience Supervision experience an asset Training Effective communication skills, verbal, and written Computer skills data analysis Ability to using various measurement techniques Strong prioritization skills Manual dexterity skills Good attention to detail Coplas Inc. is proud to be an inclusive and equal opportunity employer. At Coplas we are committed to ensuring the workplace is free from discrimination. Coplas welcomes and encourages applications from everyone including persons with disabilities. During our hiring process, we will notify job applicants that accommodations are available upon request. If a selected job applicant requests accommodation, Coplas will consult with the individual and provide or arrange for the appropriate accommodation taking into account the applicant's disability-related needs. Please contact Tiercon Human Resources at **************. The Prevue ATS uses AI technology to match candidates to job opportunities. Please see the Terms of Service for full details

QUALITY TECHNICIAN 2nd SHIFT 2:30 PM - 11:00 PM MISSION To create new value, excite and delight our customers through the best automotive products and services. We value integrity, customer focus, creativity, with efficient and nimble actions and respect highly motivated people with team spirit. JOB SUMMARY: Support manufacturing by guiding, training, and covering floor receiving, shipping, and manufacturing activities to reduce customer exposure and excessive internal waste. ESSENTIAL FUNCTIONS: Supports manufacturing validation, and verification of product quality standards. Reviews daily shutdown / stop notices and reports trends / further actions as appropriate. Participates and leads floor audit activities and action plans. Verify equipment used for part validation is appropriate for use. CONTROL OF NON-CONFORMING PRODUCT: Monitors sort/rework activities and confirms product is identified during all stages and records are maintained. Trains sort staff and audits sort activities to validate effectiveness FINAL AUDIT: Performs sampling audit on all shipments, and maintains shipment audit records Verifies that containers are identified correctly Assures that suspect material is identified and placed in the designated quarantine area to prevent shipment EDUCATION AND EXPERIENCE: Minimum of 2 years of manufacturing quality experience. Quality systems experience or training required. Basic computer skills and required. Previous experience using Plex software preferred. Job Type: Full-time Benefits: 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Schedule: 8 hour shift Day shift Monday to Friday Weekends as needed Experience: Quality: 2 years (Required) Stamping: 3 years (Required) Plex: 2 years (Preferred) Shift availability: 2 nd Shift (Required)

Full-time Description The Quality Technician supports the company's quality assurance and continuous improvement processes by performing inspections, maintaining documentation, and ensuring compliance with customer and company standards. This role is responsible for executing quality control activities, managing nonconformance documentation, and providing accurate data to support production and customer satisfaction. Requirements Responsibilities: Input and maintain records for Nonconformances (NCs), Return Material Authorizations (RMAs), and Vendor Returns (VRs) in the quality system. Support communication with customers regarding quality issues, corrective actions, and compliance status. Review and validate orders for compliance with customer terms, specifications, and quality requirements. Operate and program Coordinate Measuring Machines (CMMs) to inspect components and verify conformance to specifications. Perform and record gage calibration and verification activities to ensure measurement accuracy and compliance. Participate in internal audits to verify adherence to ISO and company quality standards; document findings and support corrective actions. Create and maintain balloon drawings, inspection plans, and test documentation for production and quality processes. Assist in identifying opportunities to improve processes, reduce defects, and strengthen quality systems. Support Quality Inspectors by assisting with daily inspection activities and cross-train to perform inspection duties as needed. Other duties as assigned Qualifications: Associate degree or technical certification in Quality, Manufacturing, Engineering, or a related field preferred. 2+ years of experience in a manufacturing quality or inspection role. Working knowledge of CMM operation and metrology principles. Familiarity with ISO 9001 or other quality management systems. Proficient in Microsoft Office and quality software systems (ERP, QMS). Strong attention to detail, organization, and communication skills.

What you will do Under general supervision, analyze defective batteries to identify root causes of failures. Process auditing to identify unfavorable trends in process and product quality for the plant. Involve process engineering and production supervision as necessary to identify and correct the cause and eliminate/minimize future occurrences. Ensure day-to-day operations are carried out, correcting any irregularities. Monitor and report success of corrective actions and the statistical control process. Control and review the organization's current processes to ensure the short-term and long-term quality standards and business objectives are met. How you will do it Perform in-process testing/audits. Perform special analysis investigations as directed. Prepares and distributes in-plant quality summaries and reports as required by Quality Engineering. Maintains health and safety practices with hazardous materials in the laboratory. Analysis of Batteries (Warranty & Scrap teardowns). May lift and move batteries from floor to bench level. Perform testing of a special nature as required by plant or Division Quality Control. Tear down test failures and analyze for cause. Analyze components of specified batteries for physical make-up according to established quality control and laboratory procedures. Record and compute test results to conform to established levels of compliance. Perform a variety of duties in manufacturing engineering sections to assist engineers where some work involves knowledge of technical aspects as distinguished from mainly clerical functions. Maintain scrap databases. Generate daily, weekly and monthly reports as required. What we look for Required Associate's degree or work experience in the field. 3 Years minimum experience in manufacturing. Experience using measurement equipment. Preferred 3 years of experience in battery manufacturing What we do here Our Toledo, Ohio fully integrated plant manufactures batteries used in automotive and marine applications. This is our largest plant at Clarios. We opened our facility in 1981 and now employ more than 700 people and operate six days per week. We are actively involved in our local community and give back through the United Way, Habitat for Humanity, Cherry Street Mission, and Ronald McDonald House. #LI-CH1 What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, Employee Assistance Program, and domestic partner benefits Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2025's Most Ethical Companies by Ethisphere. This prestigious recognition marks the third consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing Special.Accommodations@Clarios.com. We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report. We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To all recruitment agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.

Our company specializes in manufacturing re-usable plastic packaging and is a leader in the thermoforming industry. We are currently looking for motivated individuals to join our team as a Quality Technician. Quality Technicians are in responsible for supporting the Quality Manager and production team to ensure parts are made to customer specifications. Technicians will utilize the MES to record their testing. Shift: 5:00 AM - 3:30 PM Monday - Thursday Reports to: Quality Manager Responsibilities: Assist Quality Assurance and Production staff by providing expertise to resolve quality issues Inspect and validate incoming parts from external companies Use hand tools such as tape measure and micrometers to inspect and test internally produced components/parts to ensure quality and system requirements are met Understand quality tolerance and GD&T Qualifications: Previous experience a quality position Strong Computer Skills Strong Organization Skills Familiarity with plant tools and equipment Strong troubleshooting and critical thinking skills Ability to Lift up to 50 pounds Ability to stand for 8+ hours Ability to thrive in a fast-paced environment Benefits: Starting pay: $19.00/hr Health, Dental, Vision, Life Insurance after 60 days 401k with 50% employer match up to 6% after 90 days Paid Time Off, Holiday Pay, Paid Sick Leave Career advancement opportunities

Job DescriptionDescription: The Quality Technician supports the company's quality assurance and continuous improvement processes by performing inspections, maintaining documentation, and ensuring compliance with customer and company standards. This role is responsible for executing quality control activities, managing nonconformance documentation, and providing accurate data to support production and customer satisfaction. Requirements: Responsibilities: Input and maintain records for Nonconformances (NCs), Return Material Authorizations (RMAs), and Vendor Returns (VRs) in the quality system. Support communication with customers regarding quality issues, corrective actions, and compliance status. Review and validate orders for compliance with customer terms, specifications, and quality requirements. Operate and program Coordinate Measuring Machines (CMMs) to inspect components and verify conformance to specifications. Perform and record gage calibration and verification activities to ensure measurement accuracy and compliance. Participate in internal audits to verify adherence to ISO and company quality standards; document findings and support corrective actions. Create and maintain balloon drawings, inspection plans, and test documentation for production and quality processes. Assist in identifying opportunities to improve processes, reduce defects, and strengthen quality systems. Support Quality Inspectors by assisting with daily inspection activities and cross-train to perform inspection duties as needed. Other duties as assigned Qualifications: Associate degree or technical certification in Quality, Manufacturing, Engineering, or a related field preferred. 2+ years of experience in a manufacturing quality or inspection role. Working knowledge of CMM operation and metrology principles. Familiarity with ISO 9001 or other quality management systems. Proficient in Microsoft Office and quality software systems (ERP, QMS). Strong attention to detail, organization, and communication skills.

**What you will do** Under general supervision, analyze defective batteries to identify root causes of failures. Process auditing to identify unfavorable trends in process and product quality for the plant. Involve process engineering and production supervision as necessary to identify and correct the cause and eliminate/minimize future occurrences. Ensure day-to-day operations are carried out, correcting any irregularities. Monitor and report success of corrective actions and the statistical control process. Control and review the organization's current processes to ensure the short-term and long-term quality standards and business objectives are met. **How you will do it** + Perform in-process testing/audits. + Perform special analysis investigations as directed. + Prepares and distributes in-plant quality summaries and reports as required by Quality Engineering. + Maintains health and safety practices with hazardous materials in the laboratory. + Analysis of Batteries (Warranty & Scrap teardowns). May lift and move batteries from floor to bench level. + Perform testing of a special nature as required by plant or Division Quality Control. + Tear down test failures and analyze for cause. Analyze components of specified batteries for physical make-up according to established quality control and laboratory procedures. + Record and compute test results to conform to established levels of compliance. + Perform a variety of duties in manufacturing engineering sections to assist engineers where some work involves knowledge of technical aspects as distinguished from mainly clerical functions. + Maintain scrap databases. + Generate daily, weekly and monthly reports as required. **What we look for** **Required** + Associate's degree or work experience in the field. + 3 Years minimum experience in manufacturing. + Experience using measurement equipment. **Preferred** + 3 years of experience in battery manufacturing **What we do here** Our Toledo, Ohio fully integrated plant manufactures batteries used in automotive and marine applications. This is our largest plant at Clarios. We opened our facility in 1981 and now employ more than 700 people and operate six days per week. We are actively involved in our local community and give back through the United Way, Habitat for Humanity, Cherry Street Mission, and Ronald McDonald House. \#LI-CH1 **What you get:** + Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire + Tuition reimbursement, perks, and discounts + Parental and caregiver leave programs + All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, Employee Assistance Program, and domestic partner benefits + Global market strength and worldwide market share leadership + HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility + Clarios has been recognized as one of 2025's Most Ethical Companies by Ethisphere. This prestigious recognition marks the third consecutive year Clarios has received this distinction. **Who we are:** Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. **Veterans/Military Spouses:** We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing Special.Accommodations@Clarios.com . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report (********************************************** . We want you to know your rights (*********************************************************************************************** because EEO is the law. **A Note to Job Applicants:** please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. **To all recruitment agencies** : Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs. Clarios is the creator behind the world's most recognizable car battery brands. We are the car battery found in most new vehicles including leading brands such as Ford, General Motors, Toyota, Honda, and Nissan. Our 16,000 employees develop, manufacture, and distribute batteries for virtually every type of vehicle. We recover, recycle, and reuse up to 99% of our battery materials, leading sustainability practices in our industry. **A Note to Job Applicants** : Please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process.