Quality control technician jobs in Towson, MD

Worker Type: Regular Work Shift: Night Shift (United States of America) Pay Range: is listed below. Actual pay rate dependent upon experience. $29.25 - $44.00 Highlights This position requires you to work in both Pierre and Aberdeen, SD. Prior Sleep Lab Tech experience is highly desired. You Belong at Avera Be part of a multidisciplinary team built with compassion and the goal of Moving Health Forward for you and our patients. Work where you matter. A Brief Overview Provides comprehensive evaluation and treatment of sleep disorders. This may involve polysommography, diagnostic and therapeutic services or patient care and education. What you will do Follows procedural protocols [such as Multiple Sleep Latency Tests (MSLT), Maintenance of Wakefulness Tests (MLT), parasomnia studies, PAP, oxygen Titration etc.] to ensure collection of appropriate data. Performs Polysomnographic data acquisition while monitoring study-tracing quality to ensure signals are artifact-free and make adjustments, if necessary. Documents routine observations including sleep stages and clinical events, changes in procedure, and significant events in order to facilitate scoring and interpretation of polysomnographic results. Implements appropriate interventions (including actions necessary for patient safety and therapeutic intervention such as continuous and bi-level positive airway, pressure, oxygen administration, etc.). Scores sleep/wake stages by applying professionally accepted guidelines. Scores clinical events (such as respiratory events, cardiac events, limb movements, arousals etc.) according to center specific protocols. Evaluates sleep study related equipment and inventory. Involved in performing outreach sleep studies. Essential Qualifications The individual must be able to work the hours specified. To perform this job successfully, an individual must be able to perform each essential job function satisfactorily including having visual acuity adequate to perform position duties and the ability to communicate effectively with others, hear, understand and distinguish speech and other sounds. These requirements and those listed above are representative of the knowledge, skills, and abilities required to perform the essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions, as long as the accommodations do not cause undue hardship to the employer. Required Education, License/Certification, or Work Experience: Registered Polysomnographer Technologist - Board of Registered Polysomnographic Technologists (BRPT) within 1-1/2 Yrs or Respiratory Therapist - Licensing Board within 1-1/2 Yrs Preferred Education, License/Certification, or Work Experience: Technical Certificate Expectations and Standards Commitment to the daily application of Avera's mission, vision, core values, and social principles to serve patients, their families, and our community. Promote Avera's values of compassion, hospitality, and stewardship. Uphold Avera's standards of Communication, Attitude, Responsiveness, and Engagement (CARE) with enthusiasm and sincerity. Maintain confidentiality. Work effectively in a team environment, coordinating work flow with other team members and ensuring a productive and efficient environment. Comply with safety principles, laws, regulations, and standards associated with, but not limited to, CMS, The Joint Commission, DHHS, and OSHA if applicable. Benefits You Need & Then Some Avera is proud to offer a wide range of benefits to qualifying part-time and full-time employees. We support you with opportunities to help live balanced, healthy lives. Benefits are designed to meet needs of today and into the future. PTO available day 1 for eligible hires. Up to 5% employer matching contribution for retirement Career development guided by hands-on training and mentorship Avera is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, Veteran Status, or other categories protected by law. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call ************** or send an email to **************** .

Our client, a leader in Industrial Paint and Specialized Chemical Products is seeking a Lab Technician to join their team. As a Lab Technician, you will be part of the Manufacturing Team. The ideal candidate will have problem-solving skills , attention to detail , and a customer-oriented mindset , which will align successfully in the organization. Job Title: Lab Technician Location: Columbus, OH Pay Range: 14 - 16.20 $/hour What's the Job? Follow batch instructions to produce precise samples for testing. Perform application and testing methods according to SOPs. Make minor adjustments to established product platforms to improve performance. Maintain accurate documentation of lab work and testing records. What's Needed? Technical certification. (Osha for example) 3 years of experience in chemistry or coatings industry. What's in it for me? Opportunity to work in a dynamic and supportive environment Potential for career growth and skill development Engagement in meaningful work supporting building safety and efficiency Collaborative team atmosphere Upon completion of waiting period consultants are eligible for: Dental Plan Vision Plan Healthcare Plan Weekly Pay If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands - Manpower, Experis, Talent Solutions, and Jefferson Wells - creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Setting: Hospital ? Are you ready to take your expertise as a cardiovascular technologist to new heights? Join Jackson HealthPros as a cath lab tech ( Cardiovascular Invasive Specialist ) and play a vital role on a team that values your expertise-while enjoying the excitement of a new location. Earn full time pay and benefits while you assist physicians and other Cath lab personnel in conducting vital diagnostic tests and procedures; and operate advanced medical equipment to capture crucial images and data of the heart and blood vessels. What You'll Need: ARRT certified Radiologic Technologist Registered Cardiovascular Invasive Specialist (RCIS) certification from Cardiovascular Credentialing International (CCI) preferred. Must have 2 years' experience in a Cath Lab hospital setting BLS & ACLS Certification (American Heart Association preferred) State specific licensing when required Apply now and you'll be contacted by a recruiter who'll fill you in with the details. Benefits Designed for Travelers We deeply value your commitment to impacting others, that's why we offer a comprehensive and competitive benefits package starting your first day. Weekly, On-Time Pay because that's how it should be Full Medical Benefits & 401k Matching Plan 24/7 Recruiter: Your main point of contact available by text, phone or email Competitive Referral Bonuses 100% Paid Housing Available Travel & License Reimbursement Impacting the Quality of Care for Patients Nationwide As a healthcare professional with Jackson HealthPros, you get the flexibility, stability and growth you need with the satisfaction of impacting communities nationwide. Choose from a variety of career options including direct hire, temp-to-hire, and travel contracts in cities coast to coast. Get full-time pay, benefits, and relocation assistance (at no cost to you) in travel contracts that give you the freedom to explore, with the stability of a full-time job. Find your perfect match with ProVenture, our AI enhanced career app designed just for you. EEO Statement Jackson Healthcare and its family of companies are an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender, gender identity and expression, national origin, age, disability or protected veteran status. We celebrate diversity and are committed to creating an inclusive environment for all of our associates. J oin our team as a traveling Physical Therapist where you'll help patients recover from injuries and manage chronic conditions while experiencing life in a new location. Apply now and we'll connect you with a recruiter who'll reach out with more details.

Summary/Objective: The Technical Service/Quality Control Technician implements and complies with quality assurance methods and procedures to ensure products and materials are produced in accordance with specifications. Essential Functions: Perform specimen tests of concrete from random loads or for special jobs or mixes; prepare test reports as required. Oversee unique jobs to ensure product standards are met, i.e., jobs that have restrictive specifications or require large quantities of material to be delivered. Perform aggregates and batch plants tests including daily graduation and moisture tests on all concrete being produced for State and spec projects. Certify concrete loads being delivered to "spec" jobs in accordance with SHA specifications; check loads for proper procedure and time of mixing. Perform quality assurance tests on trial batches of new concrete mix designs under close tolerance conditions and make adjustments until mixture meets specifications. Troubleshoot problems with customers, analyze and evaluate specific conditions, situations, quantities, etc., and provide appropriate resolution. Provide technical assistance and training to plant managers, equipment and yard operators, and drivers when requested. Perform laboratory tests including gradation, moisture, lightweight particles and specific gravity tests on aggregates. Select samples for materials that need certification by an outside laboratory or that are beyond the department capability. Transport these samples to the testing agency. Perform additional tasks such as cleaning facilities to ensure safety and cleanliness, moving equipment and materials, and completing tasks for other positions when incumbent is absent. Assist the Technical Services Manager and Assistant Manager as needed. Other duties as assigned. JOB SPECIFICATIONS Work Environment: Work time will be split between indoors/office and outdoors/field Exposure to dust and fumes/offensive smells. Exposure to chemicals such as concrete, chemical admixtures. Close proximity to moving mechanical parts. Noise level will be moderate to loud. Physical Demands: Lift a maximum weight of 50 lbs., repetitively lift 50 lbs., carry approximately 50 lbs., and push/pull approximately 75-100 lbs. Reach overhead and reach away from the body. Minimal kneeling, squatting and climbing may be required. Sit 3 hours per day, stand 5 hours per day, and walk 2 hours per day. ADDITIONAL QUALIFICATIONS Experience: Laboratory testing experience in ready-mix concrete or aggregates preferred. Special Skills: Written communication, verbal communication, and basic mathematical skills. Ability to use a computer and iPad, including Microsoft Office. Ability to use the company dispatching system. Ability to compute basic material calculations. Excellent interpersonal skills. Able to exhibit a high level of confidentiality. Excellent organizational skills. Must be able to identify and resolve problems in a timely manner. Certifications: Valid Driver's License. ACI Level 1 certification (must be obtained within 1 year of assuming position). Industry Related Experience or Skills: Background in concrete, construction, mining operations or building materials (preferred). Education Required: High School Preferred Education: N/A Bilingual in Spanish Preferred: Yes Interested in future opportunities with Chaney? Join our Talent Community to get alerts about newly posted positions. Click here to sign up!

Come Join Us! From apartments in New York to hospitals and stadiums in Dallas, libraries at prestigious universities to creating modern retail experiences, our teams contribute architectural glass and building products to projects that shape the way people live, work, heal, learn, and play. At OBE, the work of our employees truly matters. With over 6,500 employees, we operate more than 80 manufacturing and distribution facilities in five countries. You can see some of our favorite projects here. Start your journey with OBE and help us build the future. What You'll Get to Do The Quality Control Technician is focused on testing materials and finished products to ensure they conform to company standards, and ensure the products are market ready. The Quality Control Tech reports to the Quality Manager. This role is perfect for an individual who has a strong attention to detail, the ability to communicate effectively, and the capacity to work collaboratively to identify and resolve quality issues. A vital member of Quality Control, this is an opportunity to build a career with an industry leader. Job responsibilities include: Approve incoming materials by confirming specifications, conducting a visual and measurement test, and rejecting and returning unacceptable materials Approve all finished products by confirming specifications and conducting required tests Return products for re-work if needed and complete documentation to complete re-work Ensure compliance to federal and state laws, as well as company standards and specifications Perform inspections across all stages of production Prepare and maintain test data for review Evaluate data and draft reports, noting any relevant deviations from existing standards Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns with urgency Work towards continuously improving workplace organization, safety, quality, and productivity, and supports an environment that empowers employees. Other duties as assigned. What We Are Looking For High school diploma or general education degree (GED) required Minimum of 2 years of inspection and/or production experience Ability to lift and/or move up to 50 pounds occasionally Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Demonstrated ability to work independently with minimal supervision Excellent organizational skills Demonstrated ability to analyze and interpret information Understanding of manufacturing methods and procedures What OBE Offers You Benefits that benefit you - industry competitive benefits at the lowest cost to the employee Work-life balance - PTO and holidays, including floating holidays you can choose Compensation that rewards your hard work - A pay-for-performance culture with potential for annual raises and bonuses Training - We will equip you with the knowledge and skills you need to succeed OBE is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link. Oldcastle BuildingEnvelope is an E-Verify Employer.

Who YOU are and what YOU can become The Quality Technician/Designated Supplier Quality Representative (DSQR) will have responsibility of all Quality functions for 2nd shift Assembly and as DSQR, is responsible for the inspection and acceptance of hardware / end item deliverables on behalf of the customer. The individual will be responsible for ensuring all engineering and regulatory requirements are met to ensure customer satisfaction. The Quality Technician/ DSQR will be a part of a cross-functional technical and operations team to focus on achieving business objectives. Who WE are and where WE are going At ST Engineering MRAS, our employees have amazing opportunities to work on advanced technologies and systems that support thousands of customers and millions of people worldwide every day. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio. We are looking for people with innovative ideas and the drive to help us grow into the future. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. What YOU will do * Manages all Quality functions for assembly program supporting 2nd shift operation. * Review and accept hardware on behalf of customers prior to delivery as DQSR, including generation of conformance certificates and all acceptance documentation. * Obtain and maintain FAA certification to provide Aircraft On Ground (AOG) support. * Acts as the Point of Contact for 2nd shift inspectors. * Assists with development of Root Cause/Corrective Action with some guidance using established RCCA tools (PFMEA, DMAIC, Apollo, 5 WHYs, 8D, etc.). * Provide Quality support and assistance with Inspection personnel while performing First Article inspections. * Processes all Nonconformance Items and Workflows in a timely manner. * Solicits weekly prioritization of tasks and deliverables that align with business objectives. What YOU must bring to Succeed High school diploma / GED with at least 2 years experience in Manufacturing or Quality. Knowledge of Aerospace / DOD / assembly line experience is highly preferred. * Acquire and maintain multiple customer representative certifications for acceptance of hardware. * Knowledge and experience for problem solving techniques such 5 why's, Fishbone, Process mapping, etc. to identify root cause and define CAPA. * Must be able to work 1st shift for three months before transitioning to 2nd shift. * This position involves access to export-controlled technology which requires U.S. Person status or government authorization. A 'U.S. Person,' as defined by 22 C.F.R. §120.62, includes U.S. citizens, U.S. nationals, individuals lawfully admitted for permanent residence (green card holders), and individuals granted asylum or refugee status in the United States. To be considered for this position, you must either be a U.S. Person or fall within a legally recognized export control exception or authorization. If hired, you will be required to provide valid proof of such status. Desired Characteristics: * Strong oral and written communication skills. * Strong interpersonal and leadership skills. * Willingness to support business needs as required to meet company objectives. * Maintain customer required inspection reports. * Work with Program QE on resolution of customer identified quality issues. * Perform inspections across all stages of production. * Strong analytical, problem solving, and root cause analysis skills. * Ability to multitask and handles tasks with competing priorities effectively. * Demonstrated ability to work independently with minimal supervision. * Detail oriented and strong computer skills. * Preferred minimum of 1 year of experience in Production Quality. * Working knowledge of PPAP and APQP, AS9145, ISO9000 / AS9100 At ST Engineering - MRAS, we offer great rewards, competitive pay, career advancement and growth opportunities. Estimate salary range for this role $52,300 to $75,900 per year. ST Engineering considers several factors with extending job offers, including but not limited to candidates' key skills, relevant work experience, education/training/certification, job level, and work location. Base salary is only one component of our competitive Total Rewards package. ST Engineering - MRAS Benefits: As a full-time employee of ST Engineering- MRAS, you are eligible for our benefits package including: * Medical, Dental, and Vision coverage starting from start date * Health Flexible Spending Accounts * Free Onsite Gym with weekly fitness classes * Immediate 401k vesting * Educational Assistance * Life Insurance * Paid Time off (Permissive for exempt staff) Employment Notice: Background and Drug Screening Requirements As part of our commitment to maintaining a safe and secure workplace, successful completion of a background check and drug screening is a mandatory condition for employment. All offers of employment are contingent upon satisfactory results from these screenings. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at ************, or by email at ***********************. Nearest Major Market: Baltimore Apply now "

Employment Type: Intern Division: Field Operations Department: Quality Salary Range: $23 - $28/hour The Quality Intern supports the Quality department in implementing and monitoring quality management processes across multiple projects in various phases of construction. This role offers broad exposure to construction operations while working closely with Quality Program Managers to uphold and enhance project standards. Responsibilities / Essential Functions * Participate in the quality program by attending meetings, performing inspections, and verifying materials. * Assist with coordination and content development for Quality pre-operational meetings. * Provide technical support on project sites, including interpreting contract drawings and submittals. * Develop an understanding of project schedules and critical path activities. * Collaborate with Quality Program Managers on initiatives such as drain assembly analysis, finish floor build-up analysis, and water intrusion control planning. * Perform other tasks as assigned by the team. Key Skills * Excellent written and verbal communication skills. * Strong initiative and problem-solving abilities. * High attention to detail. * Effective time management with the ability to handle multiple responsibilities and meet deadlines. * Ability to work in a team environment with a primary focus on collaboration. Required Experience * Pursuing a Bachelor's Degree in Construction Management, Engineering, or a related field (preferred). * Demonstrated interest in construction management and the construction industry.

Job Description About Us At Tate we are passionate about everything we do. As an independent brand operating within Kingspan Group, a global plc group of companies, Tate has been recognized worldwide as an industry leader in the development and manufacture of data center infrastructure solutions and commercial office raised access floors, for over 60 years. With revenues of over $420m and growing, Tate plays a pivotal role in offering expertise in cutting edge design engineering in order to craft solutions, by working collaboratively with clients as a trusted partner. Tate continues to grow and expand, operating multiple manufacturing and commercial sites across the US, Europe, the Middle East, Asia, and Australia. We are excited about our fresh, dynamic, and inclusive team of experts working on new innovations and forward-thinking designs, as we remain a market leading player within our industry. We continue to invest heavily in the best available manufacturing tools and equipment needed to adhere to Tate's world class standards and in keeping with our Planet Passionate sustainability strategy, our focus is on having minimal climate impact. We are excited by potentially welcoming you as part of our team as we continue to grow on a worldwide scale. About the Role We are looking for a Quality Technician 1 to join our team at our Baltimore, MD facility. The Quality Technician 1 is responsible for quality inspection for all products to ensure they conform to all applicable company and quality standards. This position will test products after, in process, and in final stages to ensure quality levels are met. Note: This Position is for 2nd Shift. Hours are Monday-Friday 2pm-1030p What You'll Do Ensures all test equipment is properly maintained and calibrated Performs routine & job specific load performance tests to ensure compliance with published specs. Performs incoming inspections on products received from vendor. Has a working knowledge of all equipment and machinery within the facility. Performs daily in process quality audits on products on production floor. Performs testing needed for qualifications of new or revised products. Maintains updated certified testing reports on standard products. Assists with continuous improvement of product and manufacturing processes to improve quality, reduce costs, and ensure product quality objectives are met. As assigned by supervisor, visits job sites to identify problems and recommends solutions. Maintains good housekeeping and follow established safety procedures. Performs other duties as assigned or directed by Team Leader/Supervisor. Follows all policies, procedures, and work instructions including Employee Handbook, Standard Operating Procedures (SOPs), Manufacturing Operating Procedures (MOPs), Job Safety Analysis (JSAs), and Safety Manual. Maintains awareness of individual contribution to and impact of the quality, safety, environmental, and product compliance policies and activities; reports all quality issues, unsafe acts, and unsafe conditions to the proper personnel. Additional Expectations Remain compliant with the Code of Conduct and Policies which includes the Kingspan Group Compliance Policy. Ensure that all duties related to product compliance are adhered to in accordance with the Product Compliance Policy, Laws, Regulations, and market demands. Responsible for all tasks to achieve compliance goals and demands of the Compliance Management System. Must raise concerns related to the Compliance Management System to their supervisor, manager, or any member of the Leadership Team, or through the confidential whistle blower service. What You'll Bring High school diploma or GED; or equivalent experience. Must be able to lift up to 50 lbs. unassisted. Must be able to stand, walk, bend, stoop or crouch for at least an 8-hour shift. Must be computer literate, including proficiency with Microsoft Office Products. Ability to use various tools and measuring instruments such as calipers, micrometers, tape measures, dial indicators, feeler gauges, etc. and verify all test equipment is in calibration and maintained in good working order. Strong shop-floor orientation. Knowledge of aluminum cutting and milling operation is a plus. Must be able to work in a fast-paced working environment with accuracy and integrity. Strong written and verbal communication skills. Detail-oriented. Three (3) plus years manufacturing experience. Employee Benefits Career Scope and Advancement: As we grow, new positions and career opportunities arise, offering accelerated paths for the right candidates, locally and globally. World of Wellness Philosophy: We empower you to take charge of your health and well-being. You'll have access to a wide range of medical, dental, and vision benefits, along with personalized guidance from a “Health Advocate.” We also offer other supplemental options, including 401k, legal, disability, and theft insurance, to ensure your financial wellness. Corporate Social Responsibility: Through Planet Passionate we are determined to reduce our manufacturing carbon (CO2e) emissions to as close to zero as technically possible, together with halving carbon intensity in our primary supply chain. We are very involved in our community, and you will have ample opportunities to support us in creating a better world. Skills Development: Given the dynamic pace of our business and a strong collaborative environment, your new role will be diverse and multifaceted - allowing you to be more versatile and develop a broader skill set. Mentorship and development: At Tate, we don't believe in hierarchy, we work together as one team for one common goal. You will have access and exposure to our senior leaders and experts for learning in your role, and additionally mentorship for the future. Culture: We have a great team culture, highly collaborative, supportive, and social. Together we innovate, collaborate, take ownership, and strive for excellence. Tate is an equal-opportunity employer. We encourage applications from candidates of all backgrounds and experiences. Stay connected with us on LinkedIn for insights into life at Tate. Join us in our mission to make a difference through exceptional solutions.

Are you looking to catapult your career by driving high-impact transformation with household brands? Do you crave an entrepreneurial, fast paced, and engaging growth assignment working with incredible people from across the globe? At Dreyer's Grand Ice Cream, we are excited to start a new chapter of accelerated growth as part of Froneri - a global pure-play ice cream leader. Come help us transform DGIC into the #1 ice cream brand! With nearly 100 years of winning experience in the U.S, a robust portfolio of powerhouse brands that consumers know and love such as Häagen-Dazs, Drumstick, Dreyer's & Edy's, and the backing and coaching of European-based ice cream experts, we know we have the winning recipe. Headquartered in Walnut Creek, the Bay Area's hub for up-and-coming food trends, our teams across our offices and factories are raising the bar on all things ice cream. We are investing in significant capital expansions to grow our Operations and Supply chain and are transforming how we work at every level to become agile, accelerate growth and elevate our quality. With a renewed focus on frozen treats, our tight-knit team of ambitious innovators are fully immersed in the business and encouraged to flex and make decisions quickly. We are committed to pursuing every great idea and delivering the best ice cream experience for our consumers, when and where they want it. Unleash your potential at Dreyer's Grand Ice Cream and discover what a sweet career we have in store for you. Main Purpose of Job: To control product quality on the line to customer specification. To be achieved by monitor control points of the product and logged on relevant documentation. To action non-conformances and out of specifications resulting in full quality control and product safety. Role And Activity To lead the team to achieve required product quality. Ensure the required standards of product quality are achieved. To complete the paperwork at the required intervals. To complete the paperwork legibly and accurately. To report all non-conformances to the line manager, QA, shift manager. Ensure the person you have reported the non-conformances to complete and signs the relevant paperwork. Attend the taste panels. Work in an organized manner. Keep your workstations tidy and clean. Ensure food safety is not compromised. Operate good manufacturing standards and encourage the team to also operate GMP. Keep yourself aware of the production plan, be aware of changes to the plan and plan your daily routine to incorporate product changeovers. Play an integral part within the team to achieve the targets set for rework, downtime and wastage. Ensure that your working practices comply with company rules and procedures in order that you and any other person using the area of work can do so in safety. Collect all required samples in line with the QC sampling plan. Attend the weekly team brief. Represent the Froneri way of working through the behaviors and characteristics in our operating model and core values Measurable Outcomes Through a lead by example approach and consistently keeping your team informed of changes and the correct manner of operation. The customer complaints target is not maximized nor is the HOLD target. Paperwork audits show no non-conformances of your written work. To report all non-conformances and have the evidence of conversation by signature of the line manger on the relevant documentation. Target taste panel scores are achieved and WASP / WIBIT panels attended. Effective communication with your line manager and work colleagues to get it right first time. QA audit finds no non-conformance. The GMP target is not compromised, and your colleagues are aware of GMP and the audits. The yield target is achieved. Communicate with your line manager and work colleagues to prevent wastage, downtime and rework waste. Abide by Health and Safety requirements, notices and signs. Complete collection and logging of required samples. Attendance at the weekly team brief. Levels Of Responsibility Completion of LQC paperwork. Leading by example in all quality matters. Product quality within your area. Sample collection. Accept line only when signed off by the line manager and the machine operator. With aid of line management provide cover for absence of LQC. Behaviors and core values: must consistently showcase the desired behaviors that represent our core values. We take ownership Stay committed to responsibilities from start to finish Make sound decisions and get into the right level of detail Apply resources to initiatives that add growth, improve efficiencies, or reduce waste We do what is right Choose transparency over convenience, even if it means difficult conversations Set clear roles and responsibilities, enabling everyone to exercise appropriate initiative and judgment Speak up when you see something that does not align to our values and policies We seek to improve Strive to continuously improve and innovate to exceed expectations Value feedback from others and encourage open dialogue to understand how we can improve Learn from both successes and failures We are better together Ensure decisions are based on what's best for the whole business Practice inclusion by seeking diverse perspectives Treat everyone with fairness and respect Work Environment: In this position, the employee will regularly work with and around others; in a wet and/or humid environment; in areas of high noise level; and around mechanical, electrical, and pressurized equipment. The work is fast paced. Cold temperatures: parts of the facility, such as storage and production areas, may be kept at low temperatures. Requires use of cold-protective PPE. May involve standing, lifting, and walking in refrigerated zones for extended periods. Fast-paced: workers often operate under strict timelines to meet production quotas. High-speed manufacturing floor with frequent movement, line assignment changes, and tight production timelines. Standing for long hours: many roles require prolonged standing and repetitive tasks. Repetitive hand and arm movements required. Must be able to stand for hours with frequent bending, reaching, and lifting. Food safety regulations: employees must follow hygiene and safety guidelines, including wearing protective gear (gloves, hairnets, etc.). Team-oriented: workers collaborate to ensure smooth production and packaging. The position involves frequent exposure to nuts and other potential allergens. The pay scale for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Dreyer's Grand Ice Cream, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. The pay for prospective employees in this role is $29 per hour, with opportunities for overtime, shift differential, cold premium pay and annual bonuses (variable depending on company performance). We offer a comprehensive group benefits package including medical, dental, vision, life, paid time off, paid holidays, paid parental leave, 401K plan with employer match and annual contribution available. Dreyer's Grand Ice Cream Inc. provides equal employment opportunities for all applicants, regardless of race, religion, gender, national origin, age, disability, marital status, veteran status, or any other protected characteristic.

Job DescriptionJob Title: Quality TechnicianLocation: Laurel MDJob Type: 3-6 month contract Industry: [Manufacturing/Electronics/Defense] Job Summary:We are seeking a detail-oriented and experienced Quality Technician to join our team. The ideal candidate will possess an IPC-A-610 or IPC/WHMA-A-620 certification and will have hands-on experience inspecting electronic assemblies to industry standards. Experience operating and programming CMMs using PC-DMIS or similar software is highly desirable. Key Responsibilities:Inspect electronic assemblies and cable/wire harnesses in accordance with IPC 610 or IPC 620 standards.Perform visual inspections for soldering, component placement, wiring, and mechanical integrity.Utilize inspection equipment including microscopes, calipers, micrometers, and gauges.Operate and/or program Coordinate Measuring Machines (CMM) using PC-DMIS or similar software (a plus).Maintain accurate inspection records, reports, and quality documentation.Assist in root cause analysis and corrective/preventive action implementation.Collaborate with production, engineering, and quality teams to identify and resolve quality issues.Ensure compliance with company and industry quality standards. Requirements:IPC-A-610 or IPC/WHMA-A-620 Certification (required).2+ years of experience in a quality assurance or inspection role within a manufacturing environment.Experience with electronic assemblies, PCBAs, or cable/wire harnesses.Familiarity with CMM operation and PC-DMIS programming (preferred but not required).Strong attention to detail and documentation accuracy.Ability to interpret technical drawings and inspection criteria.Excellent communication and problem-solving skills. Preferred Qualifications:Experience in ISO 9001, AS9100, or similar regulated environments.Knowledge of statistical process control (SPC) and quality tools (e.g., Pareto, Fishbone).Proficiency with MS Office Suite.

The Quality Technician is responsible for ensuring the quality standards of incoming materials, in-process production, and finished products are met. This role involves inspecting and approving materials and products through various tests, documenting results, and working closely with production teams to resolve quality-related issues. This position reports directly to the Quality Assurance Manager for daily supervision and performance reviews. Summary of Essential Job Functions/Responsibilities Inspect and approve Incoming Materials: Verify specifications of incoming materials through visual and measurement tests. Reject and return materials that do not meet standards Inspect In-Process Production: Monitor ongoing production by ensuring specifications are met through visual and measurement testing. Communicate necessary adjustments to lead personnel or supervisors Approve Finished Products: Confirm that finished products meet quality standards through testing. Return products for re-work when necessary, and ensure re-work is performed and approved Document Inspection Results: Maintain accurate reports and logs of inspection results, summarizing re-work and waste. Input data into the quality database for future reference Maintain Measurement Equipment: Ensure that all measurement tools and equipment are properly maintained and in good working condition. Communicate equipment repair needs when necessary Interpret Blueprints and Specifications: Read blueprints and interpret technical specifications to ensure accurate quality assessments. Ensure Safe Work Environment: Adhere to safety and health protocols, ensuring all tasks are performed within established safety standards Continuous Learning and Skill Development: Update job knowledge by participating in relevant educational opportunities and adopting new skills to improve inspection processes Achieve Organizational Quality Goals: Complete tasks that contribute to meeting organizational quality and operational objectives Other Duties as Assigned: Perform other related duties as required Qualifications Experience: Minimum of four to five years of prior experience in a quality-related position or a comparable role, preferably in the metals industry Work Environment: Experience in an industrial warehouse setting, ideally within the metals industry Industry Standards Knowledge: Familiarity with ISO-9001, QS-9000, ISO-14000 standards and metallurgy preferred Computer Skills: Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint), Adobe, and other relevant software programs Attention to Detail: Must be meticulous, with a strong eye for detail to ensure high-quality standards are maintained Self-Management: Ability to work independently with minimal supervision and demonstrate initiative in completing tasks efficiently Physical Examination: Ability to pass a physical examination for vision, hearing, and mobility Reliability: Demonstrated reliable work history Attention to Detail: Must be detail-oriented with a strong focus on precision and quality in all tasks

Local Manufacturing company in Hanover has an immediate opening for an experienced Metal Quality Technician for 1st shift. PAY $16 - $25/hr DOE.

Job Description Quality Technician Day Shift: work 2 days, off 2 days, work 3 days, off 3 days (6am to 6pm) Pay: $22.50/hr. with increase opportunities after 120 days Requirements: 1-2 years of experience with quality experience; preferably within the printing, food, or regulated industry with knowledge of GMP's (21CFR 110/111/210/211) Proficiency in Microsoft Office suite is essential Excellent communication skills, both verbal and written Excellent time management skills Attention to detail is essential Ability to work rotating shift 2-2-3-3; including weekends when scheduled Prior experience in the food environment is beneficial Ability to walk, stand, sit, stoop, bend, twist and lift up to 50 pounds. Job Functions: Responsible for monitoring and identifying critical control points (CCP) within the processes. Responsible for monitoring processes and product food safety and quality throughout the manufacturing process. Responsible for the correct documentation and filing of all relevant record logs and Documentation. Ensures the correct recipe guidelines for products are met during processing. Ensures employees are following all Food Safety and worker safety practices. Ensures and educates employees on quality expectations. Collect product samples for the Quality lab. Perform inspections on in-process printing to ensure quality and accuracy of the print according to customer specifications. Identifying non-conformances and ensuring they are corrected “real time” when feasible. Working directly with Operations on the presses, slitter, lamination, etc. to identify areas for continuous improvement. Ensuring paperwork is accurate and filled out in a timely manner on the production lines. The above duties and responsibilities are representative of the nature and level of work assigned and are not necessarily all-inclusive. Benefits: Medical, dental, vision, and prescription drug coverage 401(k) plan with generous company match Bonus program Paid vacation and personal days Paid holidays Company-paid life and AD&D insurance Company paid short-term disability coverage Employee Assistance Program (EAP)

Job Type: Full Time; Non-Exempt The Quality Control Technician will work cross-functionally to plan, organize, and recommend strategies to ensure products are developed successfully and in accordance with all specifications, SOP's, and GMP's. This position will be responsible for enforcing processing and manufacturing procedures, technology, and business practices documented in state-level SOPs, policies, forms, and batch records. This includes a complete understanding of the operation and maintenance for all equipment and HMI controls critical to finished good manufacturing. Also responsible for ensuring finished gummies meet formulation specifications, food safety guidelines, and established quality standards. Responsibilities: * Conduct inspections and audits to monitor and ensure traceability of product movement throughout the facility and to confirm established product quality requirements are achieved across all stages of production * Promptly communicate identified discrepancies to site and regional leaders and document accordingly * Advise operators of problems and follow up to ensure resolution; troubleshoot equipment issues and resolve efficiently to minimize production downtime * Investigate and participate in correction activities as directed * Assist with calibration, preventative, and routine maintenance of equipment * Continuously monitor processes to ensure sampling is appropriate to the product; color, flavor, weight, size, and appearance of the finished product meets specifications * Oversee QC for changeovers from one product or batch to another; ensure equipment and product continues to meet all specifications * Works with and trains new employees in all facets of finished goods manufacturing operation * Ensure work areas are maintained, organized, and in compliance with sanitary requirements * Accurately complete documentation and enter data to ensure compliance with internal and regulatory requirements; responsible for maintaining traceability in seed-to-sale and information management systems * Perform duties related to sampling and testing as required by production and staffing needs * Provide guidance on placement of operators and others on the production line * Possesses knowledge of the sanitation, safety, and requirements for food processing, handling, and storage in manufacturing of Gummy products * Responsible for CIP operation throughout all equipment used in the process to manufacture Gummy products * Maintain HACCP for all products and processes manufactured onsite * Lifts containers of in-process, finished, or waste products and transports within the facility as necessary * Perform all duties in compliance with safety rules, standard operating procedures and good manufacturing practices * Responsible for destruction of designated products * Maintain and enforce strict adherence to established safety and security procedures and report potentially unsafe conditions * Identify areas for quality control improvement and participate in problem solving activities to drive process improvements * Promote a culture of quality and change management * Additional duties and responsibilities will be assigned as necessary Education Requirements: * High school diploma or GED is required * Degree preferred in analytical chemistry or similar/related field Experience Requirements: * Minimum of 1 year working in a manufacturing or production based environment; experience in a GMP facility a plus * Analytical instrumentation experience preferred * Leadership or supervisory experience preferred Key Knowledge, Skills, and Abilities: * Fluent English skills to read/understand written instructions, manuals, and other information; to maintain a variety of written records, and to communicate effectively with and train, employees in a complex process * Fundamental arithmetic skills (addition, subtraction, division) to calculate weights, fills, etc * Computer skills, including keyboarding, standard functions, and data entry * Mechanical aptitude for troubleshooting and fixing equipment malfunctions, reading/understand gauges/controls/touch screen logic * Mechanical aptitude for troubleshooting and fixing equipment malfunctions * Perform duties that require constant attention to the manufacturing process Physical Requirements: * Ability to lift 50 pounds unassisted * Ability to stand/walk for most of shift * Ability to push/pull items weighing up to 100 pounds assisted * Ability to maintain attention and focus during manufacturing process * Manual dexterity to manipulate controls, disassemble/assemble equipment using a variety of hand tools. Environment: * Constant exposure to noise levels loud enough to require employees to wear hearing protection * Warm temperature levels, fumes, vibration, etc., enough to cause minor discomfort, oily/wet conditions * Employees to wear protective eyewear, hair nets, uniforms, steel-toed shoes, and gloves

The Work Study - Tech Biology will participate in research activities with a specified mentor. This student may also assist with ordering and organizing shared laboratory research materials and maintaining the spaces and equipment in the Biological Sciences Research Laboratory. Essential Functions Complete relevant biological assays independently. Collect and analyze field samples and/or data relevant to the research project. Work with faculty mentor to design and implement experiments and/or protocols. Discuss and determine the future directions of the research project in consultation with the faculty mentor. Read and discuss research papers with mentor and potentially other students in the research laboratory. Work with faculty mentor to prepare scientific presentations/posters for dissemination of scientific results, as appropriate. Keep a detailed notebook on all lab functions performed Communicate with lab services and biology faculty members to keep lab stocked and to alert regarding waste removal.

Work Hours: 8:00 AM to 4:30 PM, Monday through Friday Pay Range: $19 - $24 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is looking for a Quality Technician to join their Boss Division in Chestertown, MD! In this role, you will be responsible for in-process audits in production, inspecting and approving incoming materials, and managing calibration of gauges. This position is ideal for someone who takes pride in precision and has a strong background in inspection, measurement, and metrology. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: * Inspect and approve incoming materials, in-process production, and finished goods against engineering drawings and specifications. * Perform visual and dimensional inspections using height gages, calipers, micrometers, optical comparators, and other precision measurement tools. * Document inspection results through reports, logs, and database entries, including rework and scrap tracking. * Communicate nonconformances to affected parties and follow up for required adjustments. * Issue Corrective Actions where appropriate based on internal guidelines. * Maintain and manage all production gauges; performing in-house calibration where possible and coordinating third-party calibration when necessary. * Verify proper operation of gauges; manage inspection and repair as required. * Ensure compliance with company quality standards, safety practices, and regulatory requirements. * Maintain SOPs for the Quality department, making revisions and updates as needed. * Assist with auditing internal work procedures and making recommendations to address non-conformances. * Participate in continuous improvement efforts to enhance quality systems and reduce rework. What We're Looking For: * High school diploma or equivalent required; Associate degree in STEM or related coursework preferred. * 1-3 years of experience in a quality, inspection, engineering or manufacturing role is preferred. * Some experience in reading blueprints and using measurement tools is required. * Strong working knowledge of mechanical measurement equipment such as calipers, micrometers, height gauges and thread gauges. * Familiarity with engineering drawings, blueprints, and industry specifications such as ANSI, ASTM, API and 3A. * Familiarity with quality documentation, reporting, and data entry. * Detail-oriented, with strong organizational and communication skills. What We Offer: * Medical, dental, and vision insurance for you and your family * Competitive salary * Bonus programs * 401K retirement plan * Training opportunities * Tuition reimbursement * Paid vacation, PTO, and holidays * Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Job Description Quality Technician ???? Work Hours: 8:00 AM to 4:30 PM, Monday through Friday ???? Pay Range: $19 - $24 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is looking for a Quality Technician to join their Boss Division in Chestertown, MD! In this role, you will be responsible for in-process audits in production, inspecting and approving incoming materials, and managing calibration of gauges. This position is ideal for someone who takes pride in precision and has a strong background in inspection, measurement, and metrology. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. ???? What You'll Do: Inspect and approve incoming materials, in-process production, and finished goods against engineering drawings and specifications. Perform visual and dimensional inspections using height gages, calipers, micrometers, optical comparators, and other precision measurement tools. Document inspection results through reports, logs, and database entries, including rework and scrap tracking. Communicate nonconformances to affected parties and follow up for required adjustments. Issue Corrective Actions where appropriate based on internal guidelines. Maintain and manage all production gauges; performing in-house calibration where possible and coordinating third-party calibration when necessary. Verify proper operation of gauges; manage inspection and repair as required. Ensure compliance with company quality standards, safety practices, and regulatory requirements. Maintain SOPs for the Quality department, making revisions and updates as needed. Assist with auditing internal work procedures and making recommendations to address non-conformances. Participate in continuous improvement efforts to enhance quality systems and reduce rework. ???? What We're Looking For: High school diploma or equivalent required; Associate degree in STEM or related coursework preferred. 1-3 years of experience in a quality, inspection, engineering or manufacturing role is preferred. Some experience in reading blueprints and using measurement tools is required. Strong working knowledge of mechanical measurement equipment such as calipers, micrometers, height gauges and thread gauges. Familiarity with engineering drawings, blueprints, and industry specifications such as ANSI, ASTM, API and 3A. Familiarity with quality documentation, reporting, and data entry. Detail-oriented, with strong organizational and communication skills. ???? What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Avera St Luke's Hospital Work Shift: Night Shift (United States of America) The pay range for this position is listed below. May be eligible for a $15,000-$20,000 sign-on bonus with a 3 year commitment! Monday - Friday: Night Shift; Shifts could be 4- 10 hour shifts or 3- 12 hour shifts Be part of a multidisciplinary team built with compassion and the goal of Moving Health Forward for you and our patients. The Sleep Lab Technologist is responsible for sleep studies and communicating with the patient and physicians. Collects, analyzes, and integrates patient information in order to identify and meet the patient-specific needs (physical/mental limitations, current emotional/physiological status regarding the testing procedure, pertinent medical/social history), and to determine final testing parameters/procedure in conjunction with the ordering physician or clinical director and sleep laboratory protocols. Documents routine observations including sleep stages and clinical events, changes in procedure, and significant events in order to facilitate scoring and interpretation of polysomnographic results. Explains pre-testing, testing, and post testing procedures to the patient. Also can understand and implement the Auto SV therapy. Prepares and calibrates equipment required for testing to determine proper functioning and makes adjustments as necessary. Follows procedural protocols [such as Multiple Sleep Latency Tests (MSLT), Maintenance of Wakefulness Tests (MLT), parasomnia studies, PAP, oxygen Titration etc.] to ensure collection of appropriate data. Score clinical events (such as respiratory events, cardiac events, limb movements, arousals etc.) Performs routine and complex equipment care and maintenance. Evaluates sleep study related equipment and inventory. Follows procedural protocols [such as Multiple Sleep Latency Tests (MSLT), Maintenance of Wakefulness Tests (MLT), parasomnia studies, PAP, oxygen Titration etc.] to ensure collection of appropriate data. Involved in performing outreach sleep studies. To perform this job successfully, an individual must be able to perform each essential job function satisfactorily including having visual acuity adequate to perform position duties and the ability to communicate effectively with others, hear, understand and distinguish speech and other sounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions, as long as the accommodations do not cause undue hardship to the employer. Required Education, License/Certification, or Work Experience: Registered Polysomnographer Technologist - Board of Registered Polysomnographic Technologists (BRPT) within 1-1/2 Yrs or Respiratory Therapist - Licensing Board Upon Hire Preferred Education, License/Certification, or Work Experience: Completion of a Polysomnographic course with hours and study documented via a certificate of completion Minimum of one year of Respiratory Care experience or a new graduate of an accredited program Commitment to the daily application of Avera's mission, vision, core values, and social principles to serve patients, their families, and our community. Comply with safety principles, laws, regulations, and standards associated with, but not limited to, CMS, The Joint Commission, DHHS, and OSHA if applicable. Avera is proud to offer a wide range of benefits to qualifying part-time and full-time employees. We support you with opportunities to help live balanced, healthy lives. Free health insurance options, for full-time single coverage on Avera High Deductible Health Plan Up to 5% employer matching contribution for retirement Career development guided by hands-on training and mentorship Avera is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, Veteran Status, or other categories protected by law. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call ************** or send an email to talent@avera.

Quality Technician Day Shift: work 2 days, off 2 days, work 3 days, off 3 days (6am to 6pm) Pay: $22.50/hr. with increase opportunities after 120 days Requirements: 1-2 years of experience with quality experience; preferably within the printing, food, or regulated industry with knowledge of GMP's (21CFR 110/111/210/211) Proficiency in Microsoft Office suite is essential Excellent communication skills, both verbal and written Excellent time management skills Attention to detail is essential Ability to work rotating shift 2-2-3-3; including weekends when scheduled Prior experience in the food environment is beneficial Ability to walk, stand, sit, stoop, bend, twist and lift up to 50 pounds. Job Functions: Responsible for monitoring and identifying critical control points (CCP) within the processes. Responsible for monitoring processes and product food safety and quality throughout the manufacturing process. Responsible for the correct documentation and filing of all relevant record logs and Documentation. Ensures the correct recipe guidelines for products are met during processing. Ensures employees are following all Food Safety and worker safety practices. Ensures and educates employees on quality expectations. Collect product samples for the Quality lab. Perform inspections on in-process printing to ensure quality and accuracy of the print according to customer specifications. Identifying non-conformances and ensuring they are corrected “real time” when feasible. Working directly with Operations on the presses, slitter, lamination, etc. to identify areas for continuous improvement. Ensuring paperwork is accurate and filled out in a timely manner on the production lines. The above duties and responsibilities are representative of the nature and level of work assigned and are not necessarily all-inclusive. Benefits: Medical, dental, vision, and prescription drug coverage 401(k) plan with generous company match Bonus program Paid vacation and personal days Paid holidays Company-paid life and AD&D insurance Company paid short-term disability coverage Employee Assistance Program (EAP)