Quality control technician jobs in Vallejo, CA

The Quality Control Associate will support the PTDA Bioassay US Testing Group by performing biochemical, immunological, and cell-based assays in support of clinical and commercial products. This role operates in a cGMP-regulated laboratory and supports process development, product characterization, stability, and lot release testing using established procedures. Key Responsibilities Perform biochemical, immunological, and cell-based bioassays Support process development, product characterization, stability, and lot release testing Review, verify, and release assay data (electronic and paper-based) Prepare reagents and maintain assay readiness Present assay results and monitor assay performance and quality Follow Good Documentation Practices (GDP) and ALCOA+ data integrity principles Perform routine laboratory maintenance and support 5S initiatives Comply with EHS safety requirements and cGMP standards Required Qualifications B.S. in Biological Sciences or related field 1-2 years of relevant experience in Quality Control Hands-on experience with immunological and/or cell-based assays Experience with aseptic cell culture Working knowledge of cGMP environments Ability to work independently and collaboratively in a fast-paced setting Strong attention to detail and ability to manage multiple priorities Effective written and verbal communication skills Technical & Systems Skills Proficiency with computer applications, data management, and electronic documentation Experience with GxP-compliant systems such as SoftMax Pro, LIMS, and Veeva QMS (preferred)

A leading patent consulting firm in San Francisco is seeking a Patent Agent or Associate. The role requires a degree in engineering or related fields, registration to practice before the USPTO, and a law degree for attorneys. Candidates should be confident in discussing technical details and comfortable engaging with prominent tech companies. This position offers opportunities across various fields, including AI and clean energy. #J-18808-Ljbffr

The Composite Fabricator II works closely with engineering staff, technicians, and vendors/suppliers in the fabrication of tooling, structures, and components utilizing a variety of materials. Responsibilities Follows design drawing instructions and written process instructions Works with Engineering in performing fabrication and assembly tasks as well as resolving tooling issues Works with and fabricates tooling, fixtures, jigs, etc. from one or more materials Operates hand/power tools (e.g., jitterbug, dotco) for cutting or trimming, as required Works with materials to perform bonding/curing (e.g., thermal plastic, rubber, resins, adhesives) in the experimental layup process, as required. Uses precision measuring tools (e.g., calipers, scales, micrometers) to check work performed Adheres to all safety requirements Works on assignments that are semi-routine in nature, following established procedures on routine work Applies acquired job skills and company policies & procedures to complete assigned tasks under minimal supervision Other duties as assigned Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required Minimum 1 - 2 years hands-on composite fabrication experience or equivalent combination of experience and education Demonstrated knowledge of layup processes Demonstrated knowledge in using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.) Experienced in reading and interpreting blueprints and drawings Demonstrated computer proficiency and ability to download work instructions, as applicable Experienced using hand/power tools (i.e. jitterbug, dotco) Preferred Qualifications (Desired Skills & Experience) Demonstrates competency in calculation of math dimensions working with sample parts, sketches and/or verbal instructions for fabricating details, as required Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Physical Demands Ability to work in a R&D and Production environment (Constant) Must be able to lift and carry objects of varying sizes and shapes up to and between 10 lbs. (Frequently) and 20 lbs. (Occasional) Requires ability to perform the following: reaching, handling, turning/twisting, lifting/lowering, stooping, kneeling, crouching, squatting, crawling, contact with metals and composites, exposure to moving parts and tools, pinch points, sharp cutters and slipping hazards, noise and atmospheric conditions, and the use of personal safety gear for face/eye, respiration, ears and feet. (Frequent) May require working from high/exposed places, tight spaces and work from ladders (Occasional) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) The salary range for this role is: $19 - $27 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. There is currently an opening for a Quality Technician 2 or Quality Technician 3 to join our team of qualified, diverse individuals. This position falls under one of Northrop Grumman's Small Business Units, Sonoma Photonics, Inc. and will be located onsite in Santa Rosa, CA Essential Functions: Adhere to and support the Quality Management System Experience handling/cleaning substrates, performing inspection and measurements of optics and other thin film products Perform testing processes, measurements, and analysis of receiving materials, packaging materials, in-process materials/products, and finished products from suppliers and manufacturing to ensure that quality standards and compliance to customer and regulatory requirements are met and tolerance specifications for the chemical, spectral, or physical property are in conformance Learn and utilize a variety of metrology equipment necessary for testing and inspection of materials and products Support the maintenance, calibration, and certification of metrology equipment and instruments and ensure compliance Prepares and monitors quality statistics and reports Reviews production records for conformance to procedures and follows proper documentation processes Conducts non-conformance tests of materials and manufactured product Ability to analyze data and create methods to analyze data This requisition may be filled at a higher grade based on qualifications listed below. Basic Qualifications: Quality Technician 2: High School Diploma or equivalent and 2 years of hands-on quality assurance experience in the optical thin-film or similar industry Quality Technician 3: High School diploma or equivalent and 4 years of hands-on quality assurance experience in the optical thin-film or similar industry Demonstrated ability to adapt quickly to new technologies and methods Acute attention to detail Good math/quantitative skills Good verbal communication skills Well versed with computer programs including Excel and Word to collect data and document data/information as well as other equipment computer programs to collect and evaluate operating data Ability to obtain and maintain a DOD Security clearance Candidate must be able to work a flexible shift Preferred Qualifications: Familiarity with thin film optical materials and thin film characterization techniques Familiarity with AS9100 Active DoD Security clearance Primary Level Salary Range: $51,400.00 - $85,600.00Secondary Level Salary Range: $61,100.00 - $101,800.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Want to make an impact? As a Quality Technician reporting to the Quality Supervisor, you'll be a key player in ensuring every candy we make is safe, consistent, and top-quality. You'll monitor production processes, inspect materials and packaging, verify procedures, maintain documentation, calibrate equipment, and ensure our formulations, nutritional info, and ingredient statements are accurate. Your work helps keep our products delicious and compliant every day. ***Position requires the ability to work overtime. As a result, it may require working varying start times, end times, and weekends dependent on business needs. Ways you will make a difference Inspects supplies, raw materials, WIP, and finished products to verify quality standards. Reviews formulas to ensure all processing parameters and procedures are in compliance. Samples and documents process data to meet product specifications. Verifies processing data and makes recommendations if necessary. Evaluates and approves all work in progress and finished products. Performs basic computer skills including but not limited to Windows, Spreadsheets, and Word Processing. Implements statistical methodology to analysis processing. Calibrates testing equipment periodically. Provides and assists in designing forms for the manufacturing departments. Reports all discrepancies to Quality Assurance leadership. Coordinates with Operations staff the successful disposition of non-conforming product. Supports internal audit programs. Inherent in each position is a general duty to maintain each respective work area in a safe and sanitary condition. Regular, predictable, full-time attendance is required as an essential function of this position. The employee may be required to perform other such duties within the scope of their employment as may be assigned. The employee must also possess the ability to take direction, follow instructions, work with others, follow work rules and schedules, focus on details, and work flexible hours as needed (including weekends). Skills that will make you successful To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS AND ABILITIES Proficiency with MS Office, including Word, Excel, and Outlook; Redzone, database and ERP system experience preferred. Strong understanding and commitment to food safety and quality; knowledge of HACCP and FSMA standards preferred. Ability to manage time and multitask successfully. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, and taste or smell work in progress and finished goods. The employee is occasionally required to sit; during product evaluations they are required to use hands to manipulate, handle, or feel objects, tools, or controls; and talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and color vision. The employee must ascend and descend stairs or climb on high platforms of up to 15 feet high, in order to perform essential functions and report to their respective workstation. The employee is occasionally required to reach with hands and arms, balance, stoop, kneel, crouch, or crawl. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently works near moving mechanical parts. The employee will be exposed to high heat (140F) for up to 10 minutes and low temperature (below 40F) to perform specific tasks. The employee occasionally works in outside weather conditions and is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals. The employee must have the ability to tolerate strong fruity, spicy, bold or pungent smells as part of routine QA checks. The noise level in the work environment is usually loud. Experiences that will support your success One year certificate from college or technical school; or two (2) to three (3) years related experience and/or training; or equivalent combination of education and experience. An equivalency of education could possibly fulfill formal degree requirements. At Ferrara, we're proud to support our employees by providing comprehensive benefits such as health insurance, dental insurance, a 401(k), and paid time off (PTO). Eligible employees may also receive an annual bonus based on company performance. Learn more about our benefits at *******************************************

Performs any combination of the essential duties and responsibilities of quality control at manufacturing facility in Dixon, CA. Successful candidates will be required to participate in a pre-employment drug screen and random drug screening per our Drug Free Workplace policy. Dependability for work schedule is crucial. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Inspects cast floats, float assemblies, and metal fabrications, hardware components, and lumber; * Inspects the casting process per drawing requirements; * Performs concrete tests per ACI / PCI and customer specifications; * Scans production and inspection documents; * Conducts safety tasks and inspections as required by The BMI Safety Program; and * Documents and records QC activities. * Performs other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or equivalent required. Requires knowledge of or ability to learn the characteristics of concrete float fabrication with 12 months of experience working with concrete and/or prior inspection. Requires one year of experience in Quality Control. CERTIFICATES, LICENSES, REGISTRATIONS: ACI concrete field testing tech Grade 1 Certification. Possess or ability to obtain PCI Quality Control Technician Levels 1 and 2 within 12months of hire. Ability to read production drawings. COMPUTER SKILLS: To perform this job successfully, an individual should be proficient with MS Word, MS Excel, and MS Outlook. Must be able to use a document scanner.

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Responsibilities: • Conducting various product and quality process server inspections • Documenting inspection results by completing reports and logs, and correctly inputting data into the quality database. • Conduct daily audits of the area they are assigned; verifying tools for proper torque and calibrations • Verifying proper Electrostatic discharge procedures Requirements: • Requires at least 6 months of related experience • High School diploma • Strong attention to detail • Ability to stand for a prolonged period • Ability to work on ladders • Manual dexterity • Must be able to effectively work within a team environment • Communicate and can follow verbal and written directions Hourly base rate: $22.00 Closing Date: 11/01/2025 @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in Corporate Sector, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, including Product Owners, Business Control Managers, and Regulators, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities Conduct in-depth reviews of existing processes for effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations. Lead development & implementation of formal processes, procedures, workflow automations to continuously optimize the team's resources to improve reliability, costs, and sustainability. Develop and maintain robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals. Execute reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work. Proactively monitor and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance. Develop and execute comprehensive project plans, incorporating technical requirements, resource allocation, and timelines to ensure on-time delivery of technology solutions Required qualifications, capabilities, and skills Formal training or certification in Information Technology, and/or 5+ years of technology, risk and controls knowledge. Strong leadership skills with exceptional communication and presence Advanced knowledge of multiple IT control and project management practices and experience working across large environments Ability to collaborate with high-performing teams and individuals throughout the firm to accomplish common goals Experience In Depth reviews of existing processes for effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations. In-depth knowledge and experience in Infrastructure and/or Application Risks and Controls Ability to independently use systems and analyze/use data to address/identify gaps in Controls, and highlight Risk Working experience in collaborating with engineering as well as business functions to achieve objectives and hold difficult conversations/escalations Preferred qualifications, capabilities, and skills Demonstrated ability to multi-task in a high-pressure environment Fast learner with an eye for detail CRISC, CISSP, or other industry-recognized risk certifications are preferred Audit experience preferable, but not mandatory

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Salary Range: the base salary range for this role is between $28.00 to $32.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Asphalt Quality Control Technician - 2500034X Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Qualifications Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred.Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations.Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more.Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution.Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business.Salary Range: the base salary range for this role is between $28.00 to $32.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data.Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERSVulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters. Job: Quality Control Primary Location: California-Vallejo Organization: GM - NORTHERN CAL Schedule: Full-time Job Posting: Dec 15, 2025, 4:45:06 PM

By joining Bio-Techne, you'll join a company with a powerful and positive purpose of enabling cutting-edge research in Life Sciences and Clinical Diagnostics. Bio-Techne, and all of its brands, provides tools for researchers to further treat and prevent disease worldwide. Pay Range: $25.20 - $34.65 Job Purpose The Quality Control Technician receives raw materials and performs product inspection and/or audits in accordance with established quality control program. This role involves sampling and testing of incoming raw materials to ensure that they, along with in-process and finished products meet the company's quality standards Responsibilities · Receive and perform inspection of incoming raw material/components to ensure compliance with company quality standards · Perform visual inspections on sub-assemblies and finished good products to identify defects and non-conformances · Maintain product quality by adhering to data management protocols · Support efficient supply chain operations by complying with and maintaining inventory control procedures · Ensure compliance with internal quality control standards and external regulations, and continuously improve quality control processes · Assist in the development and implementation of quality control procedures. · Collaborate with production teams to address quality issues and recommend corrective actions Qualifications Education: · High School Diploma · A.A Degree a plus Skills and Experience: · Life Sciences industry experience preferred. · Experience working in a Quality Control environment is strongly desired. · Previous experience performing incoming inspections is strongly desired. · Detail-oriented, efficient, and excellent organization skills. · Excellent verbal and written communication skills · Strong team player with the ability to work independently. · Able to multi-task and prioritize. · Proficiency in Microsoft Office and other relevant software · ISO and GMP experience preferred Working Conditions: · Significant amount of time on the production floor, in a laboratory setting · Some time in an office setting documenting inspection result, analyzing data, and communicating with team members Physical Requirements: · Standing and walking · Lifting and moving materials up to 50 pounds · Use of hands for precises tasks such as handling samples and testing equipment Why Join Bio-Techne: We offer competitive insurance benefits starting on day one: medical, dental, vision, life, short-term disability, long-term disability, pet, and legal and ID shield. We invest in our employees' financial futures through 401k plans, an employee stock purchase plan (ESPP), Health Saving Account (HSA), Flexible Spending Account (FSA), and Dependent Care FSA. We empower our employees develop their careers through mentorship, promotional opportunities, training and development, tuition reimbursement, internship programs, and more. We offer employee resource groups, volunteer paid time off, employee events, and charity drives to build a culture of caring and belonging. We offer an accrued leave policy with paid holidays, paid time off, and paid parental leave. We foster a culture of empowerment and innovation, where employees feel valued and encouraged to bring their new ideas to the table. Bio-Techne is an E-Verify Employer in the United States. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. To protect the interests of all, Bio-Techne will not accept unsolicited resumes from any source other than a candidate application. Any unsolicited resumes sent to Bio-Techne will be considered Bio-Techne property.

Quality Technician will report to the Receiving Quality team lead and have the final goal to support the development of business processes to ensure that Ryzen's Client's products and services provide a high level of quality that meets the defined standards and specifications and in the end, the customer expectations. You will be helping in establishing high quality standards and will ensure product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. You will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part and vehicle level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status in NPI, manufacturing, and services Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Qualifications Bachelor's degree with 6- 8 years of experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Experience with Root Cause Analysis, Problem Solving and Quality Control methods Must be familiar with Google suites (words, docs, sheets) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Electrical component (wire harness) inspection experience Previous experience in SAP and/or JIRA system Industry background and/or experience in; automotive, software, contract manufacturing, customer management Pay Rate: $35.00/HR - $45.00/HR

3rd Shift QC Lab Tech needs 4 years experience QC Lab Tech requires: 10p-630a Tues-Sat High school diploma/GED and experience working in a chemical laboratory preferred. PC proficiency in Microsoft Office products, specifically excel tabling and charting, SAP, and other database experience preferred. Familiar with analytical equipment, wet chemistry techniques, and/or mechanical testing apparatuses. Strong work ethic, self-motivated and ability to drive projects to desired results. Ability to work on requested shift. Training rotations may occur on a different shift than the application states, and can take 1-3 months to complete. QC Lab Tech duties: Complies with all Safety, Health, and Environmental rules, procedures and regulations. Conducts all laboratory work in a safe manner including the use of proper Personal Protective Equipment (PPE), adherence to the site safety practices, use of lab equipment, 5S, etc Perform all work in strict adherence to QC standard laboratory procedures (SLPs). Reviews and provides recommended improvements to QC standard laboratory procedures (SLPs). Inspection and testing of incoming raw materials, semi-finished goods, and finished goods according to defined instructions, procedures and methods. Executes lab testing and generates test data, documentation and lab reports. Communicates basic observations regarding data and/or experimental outcome. Provides support for projects assigned by Engineers and/or Supervisors. Assists in maintaining project timelines. Employs basic problem-solving skills to overcome project bottlenecks and maintain project deliverable dates

Quality Control Technician needs 2+ years of work experience in a professional, manufacturing, or laboratory setting Quality Control Technician requires: High school diploma or GED 2+ years of work experience in a professional, manufacturing, or laboratory setting Basic math skills Clear and effective oral and written communication with a small team within a large company Ability to work independently and to take directions based on circumstances Computer literacy in Microsoft Office Suite Be able to safely work with chemicals in a laboratory and manufacturing environment Preferred: Associates degree in sciences or some college coursework Knowledge of basic laboratory practices Physical Requirements: Must be able to lift up to 50 lbs. Must be able to stand for long periods of time Quality Control Technician duties: Operate analytical instruments to perform quality control testing of liquid 3D printing resin according to standard, including: o Digital Light Processing (DLP) 3D printing. Color and ultraviolet spectrophotometry. Rheology. ASTM methods D790, D412, D638, D7867 Calculate and report test results using Albert and SAP software for the completion of quality tasks Communicate with product development, engineering, and production personnel to make batch adjustments as needed Use good manufacturing practices to maintain clean working environments such as lab benches, fume hoods, and ovens. Monitor equipment performance by completing routine standards checks Perform incoming inspections of raw materials shipments and property data File, maintain, and appropriately dispose of raw material, quality retain, and finished product inventories Comply with weekly 5S standards including sweeping, mopping, organizing, and trash removal. Ensure end to end sample and product traceability Complete other miscellaneous responsibilities within the Quality Department as assigned by department manager

Full-time Description To assist in Inspection Lab activities allowing it to perform seamlessly while providing accurate, repeatable measurement results that fully support the needs of our internal and external Customers Requirements 1) Working with peers to help coordinate and schedule Inspection Lab functions so all requirements are accomplished in the most efficient manner possible. 2) Perform first piece, in-process, and final inspections and document as required 3) Program and operate the CMM & Faro Arm 4) Crosstrain on all lab equipment to have a functional knowledge and operational ability of the equipment listed above 5) Be a subject matter expert on the use of all conventional measuring equipment, ability to design and develop specialty gauging, along with a highly developed understanding of GD&T 6) Work with the QA Manager and Quality Engineer and other Inspectors to perform capability studies, Gauge R&R studies, and other statistical techniques. 7) Supply the necessary data for AS9102 and PPAP submissions. 8) Assist in calibration activities to ensure all are accomplished as scheduled Research, and suggest upgrades/alternatives/additions to the existing lab equipment while also justifying the procurement by demonstrating the appropriate ROI

Job DescriptionSalary: $18 Quality Control Technician Who We Are Wisoman Foods Inc., located in Hayward, CA, is a proud Woman-Owned Certified business committed to delivering high-quality, innovative flatbreads from tortillas to traditional Indian varieties at exceptional value. Operating one of the most advanced high-speed tortilla manufacturing facilities in the region, we use full automation from mixing through packaging to ensure the highest standards in food safety, consistency, and quality. We're SQF Level 2 Certified, Organic Certified, Non-GMO Project Verified, and OU Kosher Certified. Our fast-paced, entrepreneurial environment is powered by a passionate team that thrives on collaboration, excellence, and continuous improvement. What Were Looking For Were hiring a Quality Control (QC) Technician who is energized by precision, passionate about food quality, and thrives in a hands-on, fast-moving environment. This role is critical to ensuring that our tortillas and flatbreads consistently meet food safety and quality standards. The QC Technician will perform routine checks, document findings, support internal audits, and collaborate with production and warehouse teams to maintain our high-quality standards. What Would Put Your Over The Top You are bilingual in English and Spanish (optional, but highly helpful) You are highly organized and very proactive You are a team player who loves to learn and be apart of an amazing team culture What You'll Be Doing Essential Duties & Responsibilities: Assist in enforcing Food Quality, Food Defense and Food Safety programs and procedures. Perform quality control activities in all phases of production, maintenance & warehouse Maintain effective communication with all operations personnel to identify, solve and prevent problems affecting food safety and quality. Monitor, document and report finished product performance according to product specifications to ensure compliance with company standards. Perform inspection of raw and packaging materials, work in process, and finished product according to company requirement. Conduct physical and analytical testing of finished product which include but not limited to pH testing, weight and diameter check, moisture test, etc. Conduct monitoring of packaging line for effective verification of product weights, metal detection, lot code monitoring and product/package integrity. Conduct Daily Good Manufacturing Practices (GMP) inspections and participate in monthly facility self-inspection; report findings and provide recommendations to QA Manager. Conduct pre-operational inspections of production equipment and facility prior to start of production. Conduct equipment verification against approved standards to ensure equipment accuracy Perform hygiene swabbing and environmental testing. Ensure that all products are evaluated for Food Safety risks including allergens, contamination, etc. Participate on the Quality System implementation and cooperate with the SQF Practitioner. Reports food safety and quality problems to personnel with the authority to initiate actions Inspects and certifies final product before packing by checking bag weights, lot codes and bag seals Assist other Departments as required Team Collaboration & Continuous Improvement Communicate effectively with production, maintenance, and warehouse staff to identify, report, and resolve issues. Assist in implementing and improving quality systems in cooperation with the QA Manager and SQF Practitioner. Participate in food safety team meetings and support third-party audits and certification efforts. Take initiative to learn new quality processes, support special projects, and assist cross-functional teams as needed. Requirements Good communication and organizational skills. Stand and walk for extended periods of time. Bend and stoop to grasp objects and climb ladders. Bend and twist neck and waist, reach above and below shoulders and squat. Bend and lift loads, not to exceed 50 pounds. Push and pull carts weighing up to 100 pounds. Repetitive use of hands for grasping, pushing, pulling, and fine manipulation. Environmental exposure to extreme temperatures (coolers, ovens, freezer, outdoors, etc.)

JOB POSTING QUALITY CONTROL Hourly Rate: $18.00 - $20.00 per hour (Based on Experience) Employment Type: Full-Time, 8:00 AM - 4:30 PM Monday-Friday, day shift, occasional weekends Department: Quality Reports To: Quality Supervisor Join our Team as a Quality Control! General Position Summary: The Quality Control is responsible for ensuring that all products meet established quality standards and customer specifications. In this role, you will monitor the production process, conduct tests and inspections, and collaborate with production teams to identify and resolve quality-related issues. Your expertise in quality assurance and continuous improvement will play a key role in maintaining the high standards of our products. This position requires a proactive approach, excellent problem-solving skills, and a commitment to upholding quality throughout the production lifecycle. Responsibilities: Print: Conduct inspections of raw materials and finished labels to ensure compliance with specifications and quality standards. Perform in-process checks throughout the production process, identifying and addressing any defects or issues. Printing and reviewing job tickets for errors. Preparing customer samples. Adding JT's to MaintainX. Reprint and replacing JT's and PDF's as necessary. Preparing Lights and Darks/Ideal Color Standards (External). Color Standard creation (Internal). Color Standard filing and maintenance of color standards (Internal). Pulling Samples per internal requests. Filing and maintaining Job Ticket Folders. Responding to email requests (varies day to day). Document quality inspection results, maintain records, and generate quality reports. Collaborate with production teams to troubleshoot and resolve quality-related issues in a timely manner. Assist in developing and implementing quality control procedures and best practices. Ensure all quality control equipment and tools are maintained and calibrated as needed. Participate in continuous improvement initiatives to enhance product quality and operational efficiency. Provide feedback and training to production staff regarding quality standards and procedures. Other duties as assigned. Online Inspection: Perform inspections on labels according to well defined criteria using specifications Participate in the SOP (Standard Operating Procedures) inspection function Evaluate problems and make initial recommendations for corrective action to supervisor Work with Quality Assurance to provide feedback to other departments Reject finished products, as necessary Assist Quality and Production Manager to investigate customer complaints Notify any problem or alert regarding converting process to Quality and Production Manager Quarantine nonconforming products and advise Quality and Production Manager for disposition Document and control quality findings and data in electronic records Must work well with others in a team environment Ability to meet daily standards Maintains a clean and organized work area Observe company work rules and safety regulations Other duties as assigned Education and/or Experience: High school diploma or equivalent. A minimum of three years of experience in the printing industry is preferred. Familiarity with quality control tools, methods, and standards is a plus. Specific Skills, Competencies, and Qualifications: Attention to Detail: Strong ability to identify defects and inconsistencies in printed products. Technical Knowledge: Familiarity with label printing processes, materials, and quality control standards. Problem-Solving Skills: Ability to analyze data and solve quality-related issues effectively. Communication Skills: Clear communication skills for reporting findings and collaborating with the production team. Mathematical proficiency: Ability to work with fractions, ratios, and proportions, to ensure accuracy in measurements and calculations. Computer Skills: Outlook, Word, Excel; plus, ability to learn color management software. Organizational Skills: Ability to manage time efficiently and maintain accurate quality records. Time Management: Strong organizational skills to manage multiple tasks and meet production deadlines. Team Collaboration: Strong interpersonal skills for working closely with production teams and supervisors. Physical Requirements: Lift/Carry - 60% of Shift Standing - 100% of Shift Walk - 95% of Shift Reach Outward - 50% of Shift Squat/Kneel - 25% - 50% of Shift Lift Up To 40lbs - 50% of Shift Must have the ability to distinguish and differentiate between colors for printing labels. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Benefits & Perks: We value our team members and are committed to providing a competitive benefits package to support your well-being and work-life balance. Full-time employees enjoy comprehensive medical benefits, including health, dental, and vision insurance, ensuring you and your family have the coverage you need. We also offer life insurance, disability coverage, and retirement plan options to help you plan for the future. In addition to paid time off (PTO) and sick leave, we provide holiday pay, wellness programs, and employee assistance resources to support your personal and professional growth. If you want to be part of a team that values innovation, collaboration, and a positive workplace culture, don't miss this opportunity-apply today! About Us: Eurostampa has been printing the most beautiful labels for more than 50 years. It is large enough to have facilities in the US (Napa, CA, and Cincinnati, OH), Italy, Scotland, France, Mexico and India, yet small enough for everyone to be on a first-name basis. Teamwork at Eurostampa permeates everything we do. Our company's value keeps us focused on taking care of our employees no matter how large we grow. EUROSTAMPA fosters an inclusive culture that respects and embraces all our colleagues' diverse backgrounds and experiences. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin, or other characteristics.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Salary Range: the base salary range for this role is between $X to $Y annual salary. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Quality Control Technician part time contract position for 6 months. Quality Control Technician needs: High School graduate and two years of college chemistry or related science courses Minimum of 2 years experience as a Lab Technician in a business setting is highly desired. Demonstrated proficiency at routine mathematics, which includes addition, subtraction, multiplication and division. Experience with basic tool manipulation including mixing equipment, lab glassware, testing machines, and other standard lab tools. Quality Control Technician duties: Laboratory Technician is responsible for the daily activity of specimen preparation, evaluation, and data generation for certification reporting of adhesive and composite products in either of two laboratories Additional Information $22//hr 6 months