Quality engineer jobs in Bayonne, NJ - 676 jobs

At ArentFox Schiff, we know that diverse backgrounds produce different perspectives, richer thinking, and more creative solutions to the challenges our clients face. We hope you share that vision. Join us and take on the challenge of doing meaningful work while helping us build a culture that reflects our dedication to diversity, equity, and inclusion. We base all of our employment decisions on merit and do not discriminate on the basis of any legally protected characteristic. JOB TITLE: IP Patent Docketing Quality Review Specialist DEPARTMENT: IP Administration REPORTS TO: IP Patent Docketing & Technology Manager FLSA CLASSIFICATION: Non-exempt LOCATION: This position is available in the following office location(s) - Washington, DC, Los Angeles, San Francisco, Chicago, Boston, New York JOB SUMMARY This individual will be responsible for reviewing work completed by IP Patent Docketing Specialists, ensuring data entered is accurate and corrected, when required, in order to ensure the highest level of accuracy within our docketing database. As a Quality Review Specialist, this individual will be involved in the training of new staff members and will be a point of contact for Docketing Specialists or other firm staff members who may have questions or need additional assistance regarding docketing-related matters. ESSENTIAL DUTIES AND RESPONSIBILITIES* Review all US and foreign patent docket updates to ensure data integrity and strict compliance with country law, client guidelines and established departmental policies and procedures. Make appropriate database corrections or communicate the corrections to the Docketing Specialist in a helpful and professional manner in order for the team member to gain a more thorough understanding of the situation; Assist with training docketing staff members, both during a new Specialist's initial training and as required based on staff and department needs; Conduct internal audit reviews of patent client portfolios and make appropriate database corrections; Work with IP Patent Docketing Manager and IP Patent Docketing Coordinator to ensure client and firm requirements are met based upon department guidelines; regularly review and ensure accuracy of information in docketing system. Work closely with the IP Patent Docketing Manager and IP Patent Coordinator in identifying problems or inaccuracies in departmental policies and procedures; assist with changes and implementation. Prepare system reports and customized queries upon request or on a routine basis. Assist with special projects, including new matter intakes, as assigned. Prepare and send final docket reports to appropriate staff members to ensure deadlines are timely met, including professional and support staff. OTHER DUTIES AND RESPONSIBILITIES Staff training, including participation in training of new staff members and creation or maintenance of training materials to ensure they reflect our current practices and procedures; Assist with reconciliation of audit reports and maintenance of database records; Assist with other IP related tasks, as necessary. Assist with client intakes. MINIMUM QUALIFICATIONS Knowledge/Skills/Abilities: Thorough knowledge and understanding of domestic and foreign patent prosecution procedures, terminology, and deadlines required; Strong organization, problem-solving, analytical decision-making, proofreading and reading comprehension skills; Excellent communications skills, both verbal and written; Accurate data entry skills; Ability to work well under pressure and adjust quickly to changing priorities while maintaining a high level of productivity and accuracy; Proficiency in use of office software such as Word and Excel helpful; Flexibility for overtime required Education: Bachelor's degree is preferred. Related work experience may be used in lieu of formal education required. Experience: Minimum seven (7) years patent docketing experience using a computerized docketing system, CPI and/or Patricia experience preferred Minimum one (1) year patent docketing quality review experience Prior law firm experience required ABOUT ARENTFOX SCHIFF: ArentFox Schiff LLP is internationally recognized in core industries where business and the law intersect. With more than 600 lawyers and policy professionals, the firm serves as a destination for an international roster of corporations, governments, private individuals, and trade associations. The annualized good faith base salary range for this position in the following location(s): New York: is a minimum of $78,000 to a maximum of $117,000 per year. The actual salary rate offered to candidates within that range will depend on a variety of factors, including without limitation, years of relevant experience, education, applicable certifications, and other relevant professional licenses held, and the candidate's overall qualifications for the position as assessed by the Firm. ArentFox Schiff is committed to equal employment opportunity and diversity in the workplace. We base all employment decisions on merit and maintain a policy of considering all qualified applicants for employment without regard to race, color, religion or creed, sex, gender, sexual orientation, gender identity or expression, age, citizenship status, order of protection status, national origin, ancestry, medical condition, genetic information, marital status, physical or mental disability, parental status, source of income, military or veteran status, unfavorable discharge from military service, or any other basis protected by applicable law. We will consider qualified applicants with criminal histories in a manner consistent with the San Francisco Fair Chance Ordinance. * A is a general description of the function and major duties of a job. It may not specify all duties, tasks, and assignments associated with a job. It is not intended to limit or in any way modify the right of management to direct, assign, and control the work of employees in a unit. Accuracy, attention to detail, ability to work effectively in a team environment, and ability to work in an atmosphere of multiple projects and shifting priorities are requirements of all jobs at ArentFox Schiff LLP. Additional job-related qualifications may be specified for some openings. Job descriptions are subject to periodic review. WORKING CONDITIONS The following table indicates the degree of working conditions expected for the job. Reasonable accommodations may be made to enable individuals with disabilities to meet these requirements. N/A = 0-10%, Occasionally = 11-33%, Frequently = 34 - 66%, Constantly = 67 - 100% Requirement Frequency Travel N/A Sitting Constantly Standing Occasionally Walking Occasionally Reading Constantly Typing Constantly Concentration Constantly Oral and Written Communication Constantly Horizontal Reaching N/A Vertical Reaching N/A Twisting Occasionally Repetitive Arm/Hand/Finger Movements Constantly Weight Occasionally, up to 15 lbs.

PRIMARY RESPONSIBILITIES: The Quality Assurance Food Safety Manager functions as a key member of the senior management team by being responsible for leading all aspects of quality, food safety, manufacturing regulations and overall sanitation within the SQF production facility. The QAFSM is responsible for developing, monitoring and maintaining Quality Assurance systems and programs to assure product integrity and compliance with SQF, GMP, HAACP, regulatory, customer standards and company Standard Operating Procedures (SOPs). They must also promote healthy, clean processing standards, documentation, training and employee development. JOB REQUIREMENTS: ● 5+ years of Quality Assurance Management experience ● BA/BS Degree, Food Science, Food Technology, or a related field ● Education and experience in food-related technology, safety and management required ● Certification and training in SQF, HACCP, Food Safety required ● Experience working with regulatory agencies such as USDA, FDA, SQF and BV ● Excellent managerial, organizational, interpersonal skills, attention to detail, and ability to adapt to different needs and working styles of managers ● Must be a self-starter, able to work independently as well as part of a team to help achieve goals and maintain compliance ● Resourceful problem solver with ability to prioritize and tackle tasks each week ● Trustworthy and reliable with confidential communications ● Positive attitude and fortitude to work through an ever-changing, growing, and dynamic operation ● Proficient in Spanish preferred PERFORMANCE RESPONSIBILITIES: ● Work closely with all departments to ensure the facility is always operating at the highest level of food safety standards. Ensure all staff follow and enforce rules, adhering to safety, food safety, and company SOPs. ● Closely support the Sanitation Manager in making sure proper cleaning and sanitation procedures are being followed ● Effectively manage the QA team, keeping all team members on task, and upholding a positive, food-safe culture ●Responsible for overseeing and managing the safe production of all products that meet company objectives. Monitor, report and fix deviations to standards ● Work in collaboration with the production management, operations and R&D teams to ensure standards are being met, and proper data is being collected ● Utilize food safety audit-readiness software to manage day-to-day operations and hold team members accountable ●Maintain supplier and internal documents as required by SQF - including, but not limited to, GFSI Certificates, COAs, COCs, raw material spec sheets, safety data sheets, product integrity logs, temperature tracking, trailer inspections, etc. ●Responsible for implementation and training of SQF rules, GMPs and compliance with regulatory standards ● Respond to and resolve customer quality complaints, conducting investigations and root cause analyses, implementing corrective and preventative actions where necessary ●Hold monthly senior management meetings to discuss complaints, non-conformances and implementation of solutions ● Create and maintain guides, conduct training for team members and visitors on GMPs, sanitation and food safety standards as required by SQF ● Work closely with R&D and production teams to document adherence to product specifications, production runs, results, timing, proper labeling, samples and trials ● Ensure the highest quality standards and good business relations are maintained with customers and governing agency representatives, such as USDA, FDA, and BV ● Verifies food safety and quality from supplier factories from raw material stage to finished product. Verifies texture, visual quality, shelf life, extended shelf life, temperature logs, packing alternatives along with R&D team ● Prepare regular reports and KPI's to establish accomplishments and efforts toward meeting objectives ● Oversee the launch of new products or trials, documenting production run data, customer and employee feedback ● Perform various lab tests to verify and validate food safety ● May participate in sensory and test panels, documenting the results ● May complete a variety of routine office tasks that may include typing, preparing reports, completing research, tracking information and KPI's, preparing or updating spreadsheets, copying, scanning, etc.

Experience Requirements: Life Sciences Degree or related discipline Minimum x (8) years of collective experience in quality management. 4 years in pharmaceuticals, or biotechnology. Demonstrate knowledge of TGA, FDA, and EU GMP and other quality related systems (e.g., ISO Standards, ICH, PIC/s) Job Purpose: Accountable for providing QA Ops management of contractors to ensure compliance with quality and cGMP/cGTP standards, oversight of ongoing manufacturing campaigns and introduction of new product lines

Stellen-ID: 3126879 | Amazon.com Services LLC Amazon Logistics (AMZL) is searching for a Sr PE Innovation Engineer to take the AMZL Process Engineering Innovation team to the next level. Our logistics teams are changing the way we interact with customers around the globe every single day and solving some of the biggest logistical challenges facing not just Amazon, but the entire industry. We are looking for an experienced, customer-obsessed Engineer to join the Amazon Logistics WW Process Engineering Team. This Engineer will be responsible for driving change, large-scale business communications, mitigating risks to plan, goal tracking, data delivery and governance, process improvement, and other ad-hoc projects that drive efficiency and reduce risk across the PE Innovation portfolio for Process Engineering. The right candidate can influence without authority and present to senior leadership. They will be a strong advocate for the team and will work hand-in-hand with key stakeholders in developing and growing strategic relationships, both internally and externally, as well as creating and streamlining internal processes. The Engineer will strive for service excellence, and drive centralization and adoption of our mechanisms with all global stakeholders. This highly visible, cross-functional role will require effective collaboration and efficient communication with multiple teams (Product, Tech, Program, Finance, Legal, SMEs, Local Ops, GP, etc.) and global stakeholders. The right candidate is proactive in understanding and communicating critical business needs, and knows how those translate into solutions. This person must have experience building long-term, strategic relationships, and becoming influential partners. This position requires heavy verbal and written communication on status, risks and our sourcing pipeline. This role is a great fit for a professional team-player who is flexible, and very comfortable with ambiguity. The successful applicant will merge a strong technical depth with bar raising communication skills. The Engineer will possess a strong business and project management background, and is able to thrive and succeed in an entrepreneurial environment, and not be hindered by opposing priorities. They will not only successfully develop and drive programs across teams, but is willing to roll up their sleeves, dive into the weeds to get the job done, focusing on the data and details to ensure the right inputs are top of mind for our customers and stakeholders. To be successful in this role you will need to be able to influence and work with senior leaders across multiple organizations and geographies. You will work with organizations such as Worldwide (WW) Engineering and Design, WW Tech SME, Last Mile Delivery and Tech as well as Operations to innovate at scale and drive the development roadmap. Key job responsibilities Handle a high volume of requests, engagements and interactions in fast paced environment Track existing and set up new metrics as required to validate vendor and team performance Develop and implement performance improvement plans, working cross-functionally with internal and external stakeholders Report on performance in weekly and monthly forums with partner teams and senior leadership Set measurable targets that align with the overall goals of the organization Comprehend the technical requirements of our internal customers and become an expert in field Influencer: Innovative pioneer with the ability to identify opportunities and influence organizations to gain support and overcome resistance with data and persuasion. Significant experience overseeing partner teams through good judgment, making and data. Doer: Ability to successfully deliver end-to-end technology and vendor operations projects, working through the many obstacles along the way Communicator: Ability to present to senior leadership, communicate expectations and requirements equally well with business and technology teams, and capacity to write well-reasoned and data-oriented proposals, performing your own data examination as necessary Problem Solver: Ability to utilize exceptional problem-solving skills to work through difficult tasks Qualifications 5+ years of directly managing and responsible for multiple large projects experience 5+ years of Microsoft Office products and applications experience Bachelor's degree in Electrical or Mechanical Engineering Experience and strong technical background in relevant fields of automated or non-automated material handling equipment 5+ years of leading large complex programs experience Master's degree in engineering, mechanical, operations, supply chain, business administration, or equivalent STEM field Experience in Lean Management, Six Sigma and other operations engineer tools Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $107,600/year in our lowest geographic market up to $177,900/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site. #J-18808-Ljbffr

Unify was founded January 17th, 2023 by Austin Hughes and Connor Heggie. Prior to Unify, Austin led Ramp's growth product team focused on new customer acquisition, and Connor was a machine learning research engineer at Scale AI. The rest of our team comes from companies like Airbnb, Spotify, Bridgewater and LinkedIn. Our mission is to build the first system-of-action for go-to-market teams, starting with an end to end platform powering warm outbound. Today, outbound sales is dominated by cold, mass outreach that floods people's inboxes and converts to deals at a tiny rate. We're building a platform to power warm outbound, allowing go-to-market teams to get in touch with the right people at the exact time they're looking for a solution. We've grown revenue 8x year-over-year, and are already serving customers like Guru, Justworks, Together.AI, Flock Safety, Hightouch and more. We're a high energy, high intensity team and we've raised $58M from Thrive, Emergence, OpenAI and others. Come join us in changing how go-to-market works. About the Role Unify is redefining go-to-market with state-of-the-art AI. As a Senior SRE, you'll tackle the scaling and reliability challenges that come with adding terabytes of data monthly and supporting enterprise customers with demanding uptime requirements. You'll work across the stack-optimizing databases, hardening services, and building the automation and observability that keep Unify fast and reliable at scale. What You'll Do Scale our data infrastructure: Optimize and extend our ClickHouse and PostgreSQL deployments-designing partitioning strategies, tuning queries, and improving replication and failover systems. Improve system performance: Profile and optimize critical paths across backend services, identify bottlenecks in data pipelines and API layers, and ship changes that improve latency and throughput. Build for reliability: Implement rate limiting, circuit breakers, graceful degradation, and other patterns that keep the platform stable under load and during partial failures. Automate everything: Write tooling that eliminates toil-automating deployments, scaling operations, backup verification, and incident remediation. Instrument and observe: Build out distributed tracing, metrics, and alerting that give engineers clear visibility into system behavior and accelerate debugging. Respond and learn: Participate in on-call rotations, run incident response, and drive blameless postmortems that prevent recurrence. Who You Are 5+ years of software engineering experience with a strong backend foundation, including 2+ years focused on reliability, infrastructure, or platform work. Hands‑handon experience operating databases at scale including query optimization, replication, and failover. Strong programming skills (Typescript, Python, Go, or similar) with experience building automation and tooling. Able to diagnose complex distributed systems issues under pressure and communicate clearly during incidents. Collaborative, low-ego attitude and desire to work in a fast‑paced environment. #J-18808-Ljbffr

Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub‑systems for high‑performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini‑Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment. Mini‑Circuits' sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive website. Position Summary: The Reliability Engineer is responsible for conducting reliability studies of existing products and coordinating new product qualification prior to market release. The candidate will work in collaboration with various teams including Reliability, Design Engineering, Product Engineering, Failure Analysis and Project Management teams. Salary Range: $99,000 - $117,000 per year Job Function: Participate in the product development meetings and guide the team to develop reliable products that meet internal specifications and customer requirements. Develop qualification plans for new products, primarily MMICs but also support other product lines including but not limited to Low Temperature Co‑Fired Ceramics, PCBA products, RF accessories and Core & Wire Products. Analyze new products for similarity with existing released products in terms of package, die process and design to determine Qualification by Similarity, thus streamlining qualification testing. Design and execute both device level and package level qualification tests including but not limited to MSL pre‑conditioning, Thermal cycling, UHAST, HTSL, ESD and Life Tests. Define ESD Human Body Model (HBM) and Charged Device Model (CDM) tests as per JEDEC standards. Collaborate with Engineering Test Teams to execute Accelerate Life Tests, High Temperature Operating Life Test. Execute Mechanical stresses such as Vibration, Mechanical Shock, Constant Acceleration & Bend Testing. Co‑ordinate with external labs for outsourced tests. Review RF Test data before and after stresses to analyze changes in performance. Collaborate with Failure Analysis teams to understand the root cause of failures. Identify and record any non‑conformities. Monitor solution implementations to verify effectiveness of corrective actions. Ensure On‑Time Completion of Qualification activities and escalator any potential delays. Present Qualification results with all relevant stakeholders to help Design teams initiate changes to improve reliability performance. Prepare written reports summarizing the results of product performance and failure analysis for both internal purposes as well as customer review. Interface with customers and suppliers on product reliability as required. Interface with supplier to purchase lab equipment. Support reliability assessments originating from production of released products or customer returns. Makes decisions within area of specialty, manages medium to large projects. Promotes ISO9001/AS9100 Quality. The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. Qualifications: BS in Mechanical Engineering, Electrical Engineering, Materials, Reliability, Industrial Engineering or Physics. Advanced degree preferred. 3‑5 years' experience as a Reliability Engineer in Semiconductor or equivalent industry. Familiarity with common industry standards including JEDEC, MIL‑STD‑883, MIL‑STD‑202 and AEC‑Q. Experience with Reliability Qualification by Similarity. Experience with Environmental, Mechanical and ESD stresses. Experience with problem solving methodologies and leading root cause analysis. Experience with customer returns failure analysis support. Must have familiarity with failure analysis techniques including Scanning Acoustic Microscopy (SEM), Radiographic Inspection (X‑Ray), Cross‑Section methods. Familiarity with MTTF, MTBF Calculations. Experience with Reliability prediction modeling and tools like Weibull++ (or equivalent reliability software) Experience with Data analysis tools including Advanced Excel, JMP, Minitab. Ability to analyze component performance data in reliability tests, including large variety of test parts and multiple design variations. Experience with Design of Experiments, FMEA, product design reviews and DFM. Excellent written and oral communication skills. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional Requirements/Skills: Ability and willingness to abide by Company's Code of Conduct. Occasional travel, some overnight, as required (up to 10%). Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini‑Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini‑Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy‑related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law. #J-18808-Ljbffr

Our employer is a leading provider of premium metal payment cards and secure authentication solutions. Headquartered in Somerset, New Jersey, the company serves major financial institutions, producing over 30 million metal cards annually and holding a dominant share in the premium metal card segment. It also offers advanced digital security through a proprietary platform that includes three-factor authentication and cold storage for digital assets, generating over $420 million in annual sales. Salary range: 85-150k USD Annual Bonus: Up to 15% (contingent upon a combination of company's and personal performance). Position Summary We are seeking an Advanced Manufacturing Engineer (Automation) who will perform the planning, design, and implementation of automation solutions across our production lines. This role involves designing and building custom machines in-house as well as managing external integrators to deliver turnkey automation systems. The ideal candidate will have a proven track record in machine design, supplier management, and project execution in high-volume manufacturing environments. This position is critical to driving automation initiatives that improve efficiency, scalability, and quality in a multi-million-unit-per-year production setting. Key Responsibilities Automation System Design & Implementation Design and develop custom automation equipment using SolidWorks. Lead full lifecycle of automation projects: concept, design, build, installation, and validation. Collaborate with external integrators and manage suppliers for outsourced machine builds. Production Line Automation Plan and implement automation solutions for assembly and packaging lines. Integrate robotics, PLCs, vision systems, and material handling equipment. Project Management Develop project timelines, budgets, and resource plans. Ensure projects meet performance, quality, and safety standards. Safety & Compliance Ensure all automation systems comply with OSHA, environmental, and company safety standards. Implement risk assessments, machine guarding, and lockout/tagout procedures. Maintain documentation for regulatory compliance and audits. Continuous Improvement Identify automation opportunities to reduce labor, improve throughput, and enhance quality. Drive cost reduction and efficiency initiatives through innovative automation solutions. Qualifications Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field. Experience 5+ years of hands-on experience in machine design and automation engineering. Proven track record of designing, building, and installing machines in high-volume manufacturing environments. Technical Expertise SolidWorks proficiency for machine and fixture design. Strong knowledge of automation technologies: robotics, PLC programming, vision systems, conveyors, and material handling. Experience with supplier management and working with external integrators. Understanding of system design, defect analysis, and process optimization. Familiarity with SPC, Six Sigma, and DoE methodologies for data-driven improvements. Ability to troubleshoot automation and mechanical issues, conduct root cause analysis, and implement corrective actions. Preferred Experience designing full production lines. Familiarity with high-speed automation for multi-million-unit production. Knowledge of Lean Manufacturing principles. Exposure to ISO 13485 or automotive quality standards. Experience with robotic integration, automated quality inspection, and vision systems. Our employer believes in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: Medical, Dental & Vision Coverage Flexible Spending Accounts (FSA) Company-Paid Life and Disability Insurance 401(k) with Company Match Paid Time Off & Paid Holidays Annual Bonus Opportunities Employee Assistance Program (EAP) Career Advancement Opportunities **** Benefits eligibility and details will be shared during the hiring process.

The Quality Registered Nurse plays a vital role in advancing the hospital ' s journey toward the ANCC Pathway to Excellence designation. This position supports the development of a positive practice environment by leading quality improvement initiatives, promoting nursing excellence, and ensuring alignment with the six Pathway Standards: Shared Decision-Making, Leadership, Safety, Quality, Well-Being, and Professional Development. Lead and coordinate quality improvement projects that align with Pathway standards, focusing on patient safety, clinical outcomes, and nursing practice. Support shared governance structures by facilitating nurse-led councils and promoting frontline nurse involvement in decision-making. Monitor and report on nursing-sensitive indicators, including infection rates, falls, medication errors, and readmissions. Conduct audits and root cause analyses to identify opportunities for improvement and ensure compliance with evidence-based practices. Collaborate with nursing leadership to develop and implement strategies that foster a respectful, safe, and empowering work environment. Educate staff on Pathway standards, quality initiatives, and professional development opportunities. Assist in preparing documentation for the Pathway application, including narratives, outcome data, and survey coordination. Promote nurse well-being by supporting initiatives that address physical and mental health, recognition, and work-life balance. How This Role Supports Pathway to Excellence: The Pathway to Excellence designation requires hospitals to demonstrate excellence across six standards: [********************* Shared Decision-Making - Quality Nurses help facilitate nurse-led councils and shared governance. Leadership - They collaborate with nurse leaders to promote transparency, accountability, and mentorship. Safety - They lead initiatives to reduce harm and foster a respectful workplace. Quality - They monitor outcomes and drive continuous improvement. Well-Being - They support programs that promote nurse wellness and recognition. Professional Development - They help create learning opportunities and career advancement pathways. Requirements Bachelor's degree in Nursing (BSN) required, Master's preferred Minimum of 3-5 years of clinical experience in a hospital setting. Experience in quality improvement, patient safety, or nursing excellence programs preferred. Familiarity with ANCC Pathway to Excellence standards and survey process. Strong analytical, communication, and project management skills. Proficiency in data analysis tools and electronic health records. Registered Nurse (RN) with active New York State licensure.

A client of Insight Global in the Bronx, NY is seeking a Production Engineer to join their team! This individual will be responsible for leading manufacturing improvements by optimizing packaging line performance and minimizing downtime through data-driven analysis. Must partner with cross-functional teams to implement sustainable process enhancements and uphold quality standards, as well as applying Lean Six Sigma methodologies to drive efficiency and support continuous improvement. This is an onsite position; candidates are required to be onsite 5 days per week. Required Skills & Experience 5-7 years of experience as an engineer in a manufacturing environment Bachelor's degree in engineering (mechanical, chemical, or biomedical preferred) Experience partnering with cross functional teams Strong understanding of Lean and Six Sigma principles

Argo Group International Holdings, Inc.and American National, US based specialty P&C companies, (together known as BP&C, Inc.) are wholly owned subsidiaries of Brookfield Wealth Solutions, Ltd. ("BWS"), a New York and Toronto-listed public company. BWS is a leading wealth solutions provider, focused on securing the financial futures of individuals and institutions through a range of wealth protection and retirement services, and tailored capital solutions. Job Description The Underwriting Quality Auditor ensures the integrity, consistency, and compliance of underwriting practices across all lines of business. This role evaluates underwriting files, identifies risk and process gaps, and provides actionable feedback to drive accuracy, authority management, adherence to company guidelines, and regulatory compliance. Responsibilities: Audit underwriting files to assess quality, accuracy, and compliance with company policies, appetite and authority statements, underwriting guidelines, and regulatory requirements. Document findings and provide concise and constructive feedback and recommendations to underwriters and management. Identify training opportunities and process improvements to enhance underwriting performance and reduce error trends. Prepare reports and presentations summarizing audit results, trends, and recommendations for senior management and monitor improvements. Maintain awareness of regulatory, market, and internal policy changes impacting underwriting practices. Support internal and external audit requests and contribute to continuous improvement of the Quality Assurance framework. Participation in regular departmental planning meetings and other projects as assigned. Required Qualifications 5+ years of underwriting experience with an Excess & Surplus or Property & Casualty Insurance Carrier Proficiency in Microsoft Office 365 suite including Microsoft Excel Preferred Qualifications Background in quality assurance, claims, compliance, or knowledge of multiple insurance lines including specialty lines is a plus. Working knowledge of underwriting systems, raters, workflows, and insurance regulations. Strong written and oral communication skills High degree of interpersonal effectiveness with a demonstrated ability to articulate review findings and make a case for change to leaders across various profit centers. A high degree of discipline and self-motivation to manage multiple audits and deadlines simultaneously. Strong analytical and investigative skills. 4-year Degree from an accredited University The base salary range provided below is for hires in those geographic areas only and will be commensurate with candidate experience. Pay ranges for candidates in other locations may differ based on the cost of labor in that location. In addition to base salary, all employees are eligible for an annual bonus based on company and individual performance as well as a generous benefits package. Chicago - $97.1k - $114.4k New York City - $105.9k - $124.7k Richmond, Omaha, San Antonio - $88.3k - $104k PLEASE NOTE: Applicants must be legally authorized to work in the United States. At this time, we are not able to sponsor or assume sponsorship of employment visas. If you have a disability under the Americans with Disabilities Act or similar state or local law and you wish to discuss potential reasonable accommodations related to applying for employment with us, please contact our Benefits Department at . Notice to Recruitment Agencies: Resumes submitted for this or any other position without prior authorization from Human Resources will be considered unsolicited. BWS and / or its affiliates will not be responsible for any fees associated with unsolicited submissions. We are an Equal Opportunity Employer. We do not discriminate on the basis of age, ancestry, color, gender, gender expression, gender identity, genetic information, marital status, national origin or citizenship (including language use restrictions), denial of family and medical care leave, disability (mental and physical) , including HIV and AIDS, medical condition (including cancer and genetic characteristics), race, religious creed (including religious dress and grooming practices), sex (including pregnancy, child birth, breastfeeding, and medical conditions related to pregnancy, child birth or breastfeeding), sexual orientation, military or veteran status, or other status protected by laws or regulations in the locations where we operate. We do not tolerate discrimination or harassment based on any of these characteristics. The collection of your personal information is subject to our HR Privacy Notice Benefits and Compensation We offer a competitive compensation package, performance-based incentives, and a comprehensive benefits program-including health, dental, vision, 401(k) with company match, paid time off, and professional development opportunities.

About Judi Health Judi Health is an enterprise health technology company providing a comprehensive suite of solutions for employers and health plans, including: Capital Rx, a public benefit corporation delivering full-service pharmacy benefit management (PBM) solutions to self-insured employers, Judi Health, which offers full-service health benefit management solutions to employers, TPAs, and health plans, and Judi, the industry's leading proprietary Enterprise Health Platform (EHP), which consolidates all claim administration-related workflows in one scalable, secure platform. Together with our clients, we're rebuilding trust in healthcare in the U.S. and deploying the infrastructure we need for the care we deserve. To learn more, visit **************** Location: Remote (For Non-Local) or Hybrid (Local to NYC area) Position Summary: We are seeking a highly motivated and detail-oriented Data Quality Engineer to join our team. In this critical role, you will be the guardian of our data's integrity, ensuring the accuracy, reliability, and robustness of the systems that power our operations and analytics. You will be instrumental in building trust in our data and empowering the organization to make confident, data-driven decisions that drive positive healthcare outcomes. Position Responsibilities: Technical Issue Identification & Root Cause Analysis: Identify, investigate, and triage technical issues within the data engineering tech stack (specifically focusing on [Specify Key Technologies - e.g., Python, SQL, Airflow, dbt]). Conduct thorough root cause analysis, utilizing logs, database queries, and system monitoring data to pinpoint the source of problems. Log Analysis & Monitoring: Monitor and analyze system logs (e.g., using CloudWatch to validate application functionality, identify performance bottlenecks, and proactively detect anomalies. Develop and maintain dashboards to visualize key system metrics. Database Querying & Analysis: Utilize SQL to query and analyze data within the Snowflake data warehouse. Develop and execute complex queries to investigate data discrepancies, identify trends, and support troubleshooting efforts. Familiarity with SQLAlchemy is a plus. AWS Service Support: Collaborate with the engineering team on the support and monitoring of AWS services utilized within data engineering (g., EC2, S3). Assist with troubleshooting issues related to these services. Collaboration & Requirements Translation: Collaborate with Product Managers and engineers to understand business requirements and translate them into actionable test requirements and test plans. Participate in sprint planning and daily stand-ups. QA Execution: Conduct thorough QA tasks, including ticket review, refinement, testing (manual and potentially exploratory), and bug identification. Scrum Team Support: Partner with the scrum team to manage backlogs, refine tickets, and support roadmap development. UAT Support: Assist with UAT testing, stakeholder communication, and documentation to align team efforts with business goals. Compliance & Reporting: Ensure adherence to company policies, including timely reporting of noncompliance. Code of Conduct: Responsible for adherence to the Capital Rx Code of Conduct including reporting of noncompliance. Minimum Qualifications: Bachelor's degree strongly preferred in Computer Science, Information Technology, or a related field. 3+ years of experience in a QA Analyst, Data Engineer, Business Analyst, or related role. Proficiency in Python Strong SQL experience; familiarity with Snowflake preferred. Familiarity with Agile methodologies and workflows. Experience with GitHub or similar source control repositories. Excellent communication and collaboration skills, with the ability to translate between technical and non-technical audiences both verbally and in writing. Strong analytical and problem-solving skills with attention to detail and QA principles A meticulous, detail-oriented mindset with a passion for ensuring data accuracy. Preferred Qualifications: Experience in the healthcare or PBM sector. Hands-on experience with modern data stack tools like Airflow, dbt, and Snowflake. Experience with CI/CD pipelines. Understanding of data warehousing concepts. Familiarity with automated testing frameworks and data validation tools. This position description is designed to be flexible, allowing management the opportunity to assign or reassign duties and responsibilities as needed to best meet organizational goals. Salary Range$85,000-$100,000 USD All employees are responsible for adherence to the Capital Rx Code of Conduct including the reporting of non-compliance. This position description is designed to be flexible, allowing management the opportunity to assign or reassign duties and responsibilities as needed to best meet organizational goals. Judi Health values a diverse workplace and celebrates the diversity that each employee brings to the table. We are proud to provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, medical condition, genetic information, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By submitting an application, you agree to the retention of your personal data for consideration for a future position at Judi Health. More details about Judi Health's privacy practices can be found at*********************************************

We are hiring an Inventory Control & Warehouse Process Improvement Manager to inventory accuracy and drive operational process improvements across approximately 30 small warehouse locations in the U.S. This role serves as a central control and improvement owner, focusing on inventory integrity, KPI visibility, and standardized warehouse processes. *This position does NOT manage daily warehouse operations or on-site staff. Key Responsibilities Inventory Control (Primary Responsibility) Own inventory accuracy across multi-site warehouse operations Manage system vs. physical inventory reconciliation Design and execute cycle count and audit programs Investigate inventory variances and drive root cause analysis Monitor shrinkage, adjustments, and aging inventory Warehouse Operations Process Improvement (PI) Analyze warehouse KPIs (productivity, error rate, on-time performance) Develop and roll out standardized SOPs for: Receiving, Shipping, Transfers, Returns and damages Benchmark performance across warehouses and share best practices Build and maintain inventory and operations dashboards Conduct occasional site visits (Approximately 20% travel) for audits, alignment, and improvement rollout Support new warehouse launches from an inventory and process perspective Qualifications Bachelor's degree or higher 5+ years of experience in inventory control, warehouse operations, or supply chain Experience supporting multiple warehouse locations Strong understanding of WMS / ERP systems Proven experience with cycle counts and physical inventories Experience in process improvement, SOP development, or operational standardization Strong Excel skills (Pivot Tables, XLOOKUP/VLOOKUP) Comfortable with limited travel (20%) Preferred Qualifications Experience in installation service or final mile logistics operations Understanding of logistics systems such as TMS and WMS Experience leading projects or collaborating in cross-functional teams Power BI / Tableau or similar reporting tools

Job Title: Quality Manager - Food Manufacturing About the Role: We are seeking a dedicated and experienced Quality Manager to join our team in the food manufacturing sector. The ideal candidate will be responsible for ensuring that our products meet the highest standards of quality and safety. You will lead quality assurance initiatives and drive continuous improvement across all production processes. Key Responsibilities: Develop, implement, and maintain quality assurance protocols and procedures specific to food manufacturing. Oversee the quality control processes to ensure compliance with industry standards and food safety regulations. Collaborate with cross-functional teams to identify and resolve quality issues. Conduct regular audits and inspections to ensure adherence to quality standards and regulatory requirements. Analyze data and reports to identify areas for improvement and implement corrective actions. Lead and mentor the quality assurance team to achieve departmental goals. Liaise with suppliers and vendors to ensure quality standards are met throughout the supply chain. Qualifications: Bachelor's degree in Food Science, Quality Management, Engineering, or a related field. Proven experience as a Quality Manager or similar role in the food manufacturing industry. Strong knowledge of quality assurance methodologies and food safety standards (e.g., HACCP, ISO 22000). Excellent analytical and problem-solving skills. Strong leadership and communication abilities. Experience with quality management software and tools. Attention to detail and a commitment to excellence. Preferred Skills: Certification in quality management or food safety (e.g., Six Sigma, CQE). Familiarity with regulatory requirements relevant to the food industry.

Job Description QUALITY MANAGER -MANUFACTURING heavy industrial Compensation: $120,000+ (Depending on Experience) Quality Manager to lead and continuously improve an AS9100-certified Quality Management System within an aerospace and industrial manufacturing environment. **This role requires a Quality leader with proven long-term employment stability, expert-level AS9100 experience, and strong verbal communication skills. This individual must be comfortable interfacing with executive leadership, customers, and external auditors and must bring a professional presence and high level of accountability. Experience in food, pharmaceutical, or chemical industries is not a good fit for this role. Requirements 7+ years of Quality Management experience in a manufacturing or job shop environment Demonstrated long-term tenure and employment stability with prior employers; frequent job changes will not be a fit for this role Expert-level AS9100 experience, including hands-on ownership and audit leadership ISO 9001:2015 experience Aerospace, defense, or ITAR-regulated manufacturing background Machining experience with a strong understanding of inspection tools (calipers, micrometers, CMM, optical comparator) Excellent blueprint reading and GD&T interpretation skills Experience with PPAP, FMEA, Root Cause Analysis, and Control Plans Exposure to Environmental, Health, and Safety (EHS) standards Excellent verbal communication skills with the ability to interface confidently with executive leadership and external auditors Ability to travel internationally approximately once per year (Mexico and Singapore) Bachelor's degree preferred; equivalent experience welcomed Benefits Medical, dental, vision, and life insurance Paid time off, holidays, and sick time 401(k) plan

New Jersey, Onsite, Full Time 150-200k (Based On Experience) We are a large-scale manufacturing operation in New Jersey, constantly evolving and committed to technical excellence, efficiency, and innovation. Our engineering team includes specialists across multiple disciplines, and we are now seeking a strong, well-rounded leader who can bring these experts together to drive collaboration, growth, and continuous improvement. Position Overview We are seeking a highly experienced and technically strong Senior Engineering Leader who can guide, mentor, and elevate a diverse team of engineers. While each team member specializes in their area-process, industrial, mechanical, automation-the Senior Engineering Leader will unify their efforts, establish standards, and ensure best practices are adopted plant-wide. The right candidate is not just a subject-matter expert but a strategic, big-picture leader who can inspire engineers, lead by example, and drive measurable improvements across all spaces. You'll play a pivotal role in optimizing operations, training your team, and embedding a culture of continuous improvement. The Ideal Candidate A well-rounded senior engineer with deep technical knowledge and leadership presence. Proven ability to unify and guide specialized engineers toward shared goals. Skilled in mentoring, training, and developing technical talent. Naturally curious, always seeking ways to optimize systems, workflows, and operations. Confident communicator who can balance strategic vision with hands-on problem solving. Key Responsibilities Lead, mentor, and develop a multidisciplinary engineering team across process, industrial, and mechanical functions. Establish plant-wide engineering standards and best practices to ensure efficiency, quality, and safety. Partner with specialized engineers to identify challenges, improve workflows, and optimize facility spaces. Drive automation, process upgrades, and system enhancements in alignment with company goals. Promote knowledge sharing and training across engineering disciplines. Support capital expenditure planning, cost models, and ROI analysis. Champion a continuous improvement culture across all engineering functions. Qualifications Bachelor's degree in Mechanical, Industrial, Process, or related Engineering field (Master's preferred). 10-15+ years of engineering experience within manufacturing environments. Strong technical expertise across multiple engineering disciplines (process design, systems optimization, automation, facility layout). Proven leadership track record of managing, training, and growing engineering teams. Experience leading cross-functional initiatives that improved efficiency, cost, or production scalability. Excellent problem-solving, analytical, and project management skills. Strong communication and leadership presence-capable of influencing both technical staff and executive leadership. Must-Haves 10+ years in high-volume manufacturing engineering. Hands-on technical strength plus proven leadership of engineering teams. Experience mentoring engineers and elevating team performance. Demonstrated success leading process optimization and system improvements across multiple disciplines. Benefits Competitive salary and performance-based incentives. Medical, dental, and vision coverage. 401(k) retirement plan with employer contributions. Professional development and training opportunities. A collaborative environment with real impact on large-scale operations. This is an exciting opportunity for a high-level engineer ready to step into a leadership role where you'll unify specialized engineers, mentor rising talent, and drive measurable improvement across a large-scale manufacturing plant. Email Resume: ********************* Apply Online: https://jobs.crelate.com/portal/maiplacement/job/eqr4zdqe388dprs6jnnfkh9tkc?crt=***********73 Refer a friend, get up to $1000!

OrganOx has been transforming organ transplantation since 2008, leveraging groundbreaking normothermic machine perfusion technology in our flagship product, the OrganOx metra . This technology helps preserve donor livers for up to 12 hours, in efforts to reduce organ discard rates and facilitate more successful transplants. We are an innovative, fast-paced global medical device company committed to improving transplantation outcomes. As part of our ongoing expansion in North America, we seek a motivated Product Quality Engineer to join our team. Position Summary The Product Quality Team at OrganOx is a technical quality engineering team responsible for monitoring, understanding, and improving product performance, in addition to owning quality processes within the service organization. The Product Quality Engineer will be technical, hands-on, and customer focused with an ability to analyze, diagnose and test product quality issues. The successful candidate is accountable, collaborative, has excellent communication and problem solving skills, and is passionate about delivering world-class products that make healthcare more accessible, simpler, and safer. Listed below are the major responsibilities of the role and a brief description of some of the key tasks to be performed. This list is not totally exhaustive. This is a flexible, on-site role in our Madison, NJ facility. Requirements Requirements Major Responsibilities Under direction from the Senior Product Quality Engineer, the Product Quality Engineer will: · Conduct hands-on analyses of returned products to identify root causes of failures · Develop investigation criteria and test methods to properly diagnose and root cause field failures · Analyze and trend on product performance data to provide recommendations for product improvements · Perform Quality trending of Service data and conduct investigations to identify causes of Servicing and Service-related complaint trends, including issues in Servicing workmanship and Out of Box failures. · Review the output of Servicing and related Complaint or Non-Conformance Investigation activities to ensure that the resulting work complies with all regulatory and service requirements, as well as facility, divisional, and corporate objectives for defect prevention and continuous improvement. · Audit and review Complaint Investigations and records of Servicing activities to ensure they are thorough, accurate, self-explanatory, and completed in a timely manner into the complaint handling system. · Analyze service-related PFMEAs and other activities to support pre-market and post-market risk management activities · Provide ongoing training to Service staff on regulatory requirements associated with complaint investigations and Servicing records · Foster supplier relationships and support Supplier corrective action requests · Support Product Transfer teams by aligning on quality requirements and processes for new or transferred products · Plan, develop, and conduct Service Manual and Service work instruction validations (IQ, OQ, PQ), test method validations, and inspection method validations · Participate in the development and review of engineering change orders that impact servicing activities · Work with Engineering to design and implement tooling and fixturing required to perform servicing activities and implement error-proofing (Poke-Yoke) in those stations · Work cross-functionally to support implementation of changes in servicing and inspection procedures to mitigate field failures. · Support CAPAs, Escalations, DCNs, and other engineering projects to address and resolve field quality issues, ensuring timely implementation and compliance with quality standards · Perform DHR, Service History record, and PFMEA reviews in support of complaint investigations · Adhere to the letter and spirit of OrganOx's Code of Conduct and all other company policies. While the above key responsibilities are the main elements of the titled job the Vice President Quality may at times request other tasks deemed to be within their capabilities. Skills and Experience · Excellent technical report writing skills · Strong Root Cause Analysis, Design Of Experiments, and test method development experience as related to Service activities and complaint or non-conformance investigations · Experience in leading investigations and trending analysis, leveraging expertise in troubleshooting electro-mechanical systems and engineering custom test fixtures and apparatuses for functional and performance validation · Ability to manage multiple investigations and projects independently. · A solid understanding of the FDA QSR Quality System Requirements, and the ability to apply the knowledge to comply with goals and objectives. · Strong experience with MS Office Products (Word, Excel, Visio, Project, PowerPoint, Outlook, etc.) · Strong experience with statistical analysis of data. Experience with Minitab preferred. Experience with Six Sigma principles preferred. · Excellent oral and written communication skills with the ability to communicate with audiences of varying technical skills · A strong ability to prepare written technical plans and reports in support of engineering changes, product or process validations, and failure investigations. · Strong focus on meeting customer needs. · Ability to work with cross-functional teams. · Ability to be self-driven and solve complex problems independently. · Demonstrated strong attention to detail and “do it right the first time” attitude Qualifications · Bachelor's degree in an Engineering discipline (Electrical, Mechanical, Bio-Medical, etc.) or the equivalent work experience · 3-7 years of related hands-on engineering experience in the medical device industry, or equivalent. · Ability to travel 10-20% · Strong background in troubleshooting electro-mechanical systems and interpreting electrical schematics and circuit diagrams · Experience using diagnostic tools such as digital multimeters and oscilloscopes, as well as developing and validating test methods for components including PCBs, motors, pumps, power supplies, and batteries · Prior experience in implementing new processes and driving improvements. · Experience in a customer focused Service organization is a plus · Familiarity with ISO14971 and associated Risk Management Processes is a plus · Knowledge of and/or experience with product decontamination and Blood Borne Pathogen exposure controls is a plus · Experience in an FDA regulated environment is a plus A job description does not imply that the duties stated are the only ones to be performed by the job holder. Employees will be required to follow any other job-related instruction as requested by their manager. Benefits At OrganOx, we value innovation, evidence, integrity, teamwork, respect, and passion. We offer competitive compensation and comprehensive benefits, including healthcare and retirement plans. We support work-life balance and provide opportunities for ongoing professional development. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tightknit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: The Product Delivery Center Quality Engineer will support activities during the assembly and test phases of production on site on 1st shift at Middletown, CT Product Delivery Center (PDC). The PDC Quality Engineer will coordinate with Production, Engineering, Customer Support, Test Engineering, and other functional disciplines to facilitate the assembly through shipping of engines. The PDC Quality Engineer will approach problem solving with innovation and develop timely action plans for resolution. The PDC Quality Engineer will coordinate the implementation of corrective actions associated to the developed action plans. What You Will Do: Investigate and analyze any hardware/assembly concerns causing assembly and delivery issues by reviewing procedures, specifications, instructions, processes, and equipment to ensure compliance to applicable drawing, specifications, and standards to resolve issues. Address any nonconformances in a timely manner and provide details to allow for resolution; work multiple priorities simultaneously to prevent or minimize work stoppages. Partner with the flow-line managers to ensure full support of the product and delivery to customers. Coordinate quality projects and initiatives between assembly and test product line personnel, and support organizations with a focus on strategic activities aimed at improving the quality signature of the PDC. Establish and execute quality plans for configuration compliance, non-conformance reduction, and customer satisfaction; participate in PDC compliance audits. Generate, maintain, and provide quality metrics to the P&W Management team and oversee quality improvement programs; serve as liaison to government and customer representatives for the Quality discipline as needed. Create process flow documents to be submitted to various government agencies and customers for their review and acceptance; create working relationship and strong lines of communication between multiple shifts supporting the PDC. Qualifications You Must Have: Bachelor's Degree in a STEM or Business field and 5 or more years' experience in an engineering, manufacturing operations, materials management, project management, quality or closely related industrial environment OR a Masters' Degree and minimum 3 or more years' experience in an engineering, manufacturing operations, materials management, project management, quality or closely related industrial environment. Experience with Microsoft Office programs (Word, Excel, Outlook, etc.). Experience managing multiple competing priorities simultaneously with ability to obtain, organize and analyze quality data. Understanding of Lean Manufacturing concepts and/or experience with Kaizen events and/or experience with a continuous improvement program (CORE, 6σ); Value Stream Mapping, Workplace Organization, Continuous Flow Manufacturing, Total Productive Maintenance, DIVE, RCCA, Mistake Proofing, QCPC, etc. U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Qualifications We Prefer: Quality system knowledge, familiarity with SAP system transactions, and the ability to query data from enterprise database systems are preferred. Ability to understand technical data, such as manufacturing, or part drawings. Knowledge of aerospace quality standards including AS9100, AS9102, & ISO. Knowledge of quality systems and familiarity with SAP System transactions. JCL2 certified or willing to acquire certification. Working knowledge of Federal Aviation Regulations regulatory requirements or work experience with government regulatory agencies. Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

SUMMARY/OBJECTIVE (Basic purpose of job) The Quality Technician primary responsibility is for carrying out the quality control lab testing for the bottling lines as well as the calibrating and setting up the lab equipment and ensuring results are recorded accurately on computer systems and data sheets. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed must be representative of the knowledge, skills, minimum education, training, licensure, experience and/or ability required. JOB RESPONSIBILITIES Perform quality function audits on all production lines. Ensure products produced conform to specification, food safety, have Good Manufacturing Practices, and adhere to relevant regulatory requirements. Perform all microbial sampling and testing for incoming raw materials and finished products. Advise production on out of specification packaging, raw materials and process deviations. Ensure all production operations operate to highest quality standards Be responsible for plating of samples, analyzing, interpreting and reporting results for all bottling, tanks. Record production information as required. Ensure accurate records are kept and maintained of all specifications and test results. Keep laboratory equipment maintained and operating efficiency and safely according to all health and safety standards. Support cleanliness and sanitation of Quality Lab, Batching Area, Production lines, Sugar and RO room. Keep all work areas clean and orderly. All other duties, as required or needed. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to talk or hear and see. The employee frequently is required to stand; walk; use hands to finger, handle or feel and reach with hands and arms. The employee must regularly lift and/or move objects up to 40 pounds. JOB REQUIREMENTS HSD, College Degree preferred 2-3 years' experience as a Lab Technician Excellent attention to details Good interpersonal and communication skills Ability to work as part of a team Good statistical and numerical ability Please note this Job Description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.