Quality engineer jobs in Caldwell, ID - 21 jobs

The Quality Engineer is responsible for ensuring that products, processes, and systems meet the highest standards of quality and reliability. This role supports the design, manufacturing, and field teams by developing and maintaining quality assurance processes, conducting root cause analyses, implementing corrective actions, and driving continuous improvement initiatives. The ideal candidate will be analytical, detail-oriented, and proactive in identifying risks and improvement opportunities. The Quality Engineer will serve as a bridge between Engineering, Manufacturing, Supply Chain, and Field Service to ensure that customer expectations are consistently exceeded. Accountabilities: Support and maintain the company's Quality Management System (QMS) in compliance with ISO and industry standards. Develop and update inspection procedures, control plans, and work instructions to ensure consistent product quality. Oversee and validate effectiveness of first article inspections (FAI), in-process audits, and final inspections to verify product conformance. Review and approve supplier and manufacturing documentation for accuracy and compliance. Assist with internal, supplier, and customer audits to ensure adherence to regulatory and contractual requirements. Lead, document and close out root cause investigations for nonconformances, customer complaints, and audit findings. Develop, implement, and verify corrective and preventive actions (CAPA) to prevent recurrence of issues affecting quality. Facilitate problem-solving using tools such as 5 Whys, Fishbone Analysis, FMEA, 8D, and statistical techniques. Collect, analyze, and report quality metrics (defect rates, rework, scrap, supplier performance, etc.). Partner with cross-functional teams to identify and execute Lean and Six Sigma initiatives. Support process capability studies, measurement system analysis, and other data-driven evaluations. Recommend design or process changes to improve product reliability, manufacturability, and efficiency. Collaborate with Supply Chain, Engineering and Operations to evaluate supplier performance and drive improvements. Support manufacturing teams with quality-related issues including training, documentation, and process control. Design processes that ensure that materials, components, and assemblies meet technical and contractual requirements. Assist with new product introductions (NPI) to ensure quality is built into every stage of design and production. Serve as a quality representative for customer interactions, audits, and field issue resolution. Provide timely and professional communication regarding quality issues and resolutions. Partner with Field Service and Engineering to evaluate and resolve field performance or warranty concerns. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Attributes Safety First: Promotes and ensures a safe working environment. Have Humanity: Builds trust and empathy through honest, respectful communication. Be Transparent: Communicates clearly and proactively across all levels. Drive Innovation: Seeks out creative solutions and process improvements. Be Resilient: Thrives in a dynamic environment and adapts to challenges. Always Reliable: Consistently delivers high-quality work with integrity. Grit: Demonstrates determination, ownership, and accountability in achieving results. Required Knowledge/Experience: Bachelor's degree in Engineering, Quality, or a related technical field (or equivalent experience). 3-7 years of experience in quality engineering within a manufacturing, industrial, or electrical systems environment. Working knowledge of ISO 9001, UL, ASME, and other quality standards. Experience in root cause analysis, CAPA, and statistical process control (SPC). Familiarity with Lean, Six Sigma, or other continuous improvement methodologies (certification preferred). Proficient in reading mechanical and electrical drawings, schematics, and technical documentation. Strong understanding of measurement tools, GD&T, and inspection processes. Excellent communication and documentation skills; able to interface effectively with suppliers, customers, and all levels of the organization. Proficient with Microsoft Office and quality management software (QMS, ERP, or similar). Strong analytical, organizational, and problem-solving abilities. Ability to work independently and collaboratively in a fast-paced environment.

The Manufacturing Quality Technician is accountable for protecting our customers by ensuring only compliant materials enter and exit the plant. This role combines comprehensive inspection and testing of incoming raw materials, in-process components, and finished composite decking products with data-driven analysis to prevent defects and drive continuous improvement. Responsibilities include auditing quality processes, maintaining documentation and calibrations, and communicating issues to support timely resolution. By identifying process improvement opportunities and collaborating cross-functionally, the technician helps ensure product reliability, operational efficiency, and customer satisfaction. 12.5 hour shifts available; A shift; Sunday, Monday, Tuesday, every other Saturday 6:30am to 7:00pm C shift Wednesday, Thursday, Friday, every other Saturday 6:30am to 7:00pm Starting Wage DOE and Qualification is $24.00 per hour Key Responsibilities: Technical Knowledge The individual in this role must have a thorough understanding of quality control including: Measurement and test equipment use and calibrations including hand tools, gauges, optical tools, balances, color meters, and force measuring instruments. Accurate data entry and analysis methods. Quality management system compliance. Process improvement and problem-solving approaches. Area management and housekeeping best practices. Risk assessment reasoning. Nonconforming materials and rework handling. Sampling plans and proper sample preparation. Inspection techniques and processes. Auditing. Core Skills The individual in this role must demonstrate mastery in the following areas: Writing Skills: Write clear, simple sentences, complete technical forms, and apply basic math concepts like estimation and spatial reasoning. Reading Skills: Interpret manuals, safety instructions, reports, and understand images, graphs, and coding systems in the work area. Oral Skills: Communicate effectively, respond to questions, and collaborate with supervisors and team members to support plant improvements. Motivation: Take responsibility for assignments, improve skills, and set personal goals with actionable strategies. Integrity: Be honest with company property and time, communicate respectfully, and resolve conflicts constructively. Reliability: Maintain punctuality, stay composed in stressful situations, and work effectively in a structured environment. Arrive fit for duty each shift. Qualifications Minimum Qualifications: Required Ability to work 12-hour shifts in a continuous manufacturing environment. Willingness to work overtime, holidays, and weekends as scheduled. Proficiency with using a computer. Proficiency using Microsoft Office Suite products. Proficiency differentiating shades of color. Ability to operate a forklift. Strong cross-functional communication skills. At least 18 years of age. Preferred High School Diploma or GED. Strong English, reading, and writing skills for career advancement, including the ability to interpret safety rules, operating instructions, maintenance manuals, and procedural documents. Previous forklift operation experience. Previous manufacturing experience. Physical Requirements The physical requirements outlined below represent those necessary for an employee to successfully perform the essential functions of this role. Reasonable accommodations may be provided for individuals with disabilities. Lift, push, and pull, up to 50 pounds. Stand and walk around for a 12.5+ hour shift. Perform physical tasks such as bending, squatting, and kneeling. Ability to operate various different styles of forklifts Wear and operate required safety equipment, including earplugs and safety shoes and glasses. Must have proficient color shade sight for materials inspection. Read printed reports and data displayed on computer screens. Fine motor skills to operate tools, including chop saws, staple guns, calipers and other test equipment. The use of personal protective equipment (PPE), such as safety eyewear, steel-toed boots, and hearing protection, is mandatory in designated areas. While performing the duties of this Job, the employee is often exposed to hot and wet and/or humid conditions; occasionally moving mechanical parts and vibration. The noise level in the work environment is usually moderate. Additional Information Company Description: Fortune Brands Innovations, Inc. is an industry-leading innovation company focused on creating smarter, safer and more beautiful homes and improving lives. Our driving purpose is that we elevate every life by transforming spaces into havens. We believe our work and our brands can have incredibly positive impacts for not just our business and shareholders, but for people and the planet, too. When you join Fortune Brands, you become part of a high-performing team who are empowered to think big, learn fast and make bold decisions. We support an inclusive and diverse culture where everyone is encouraged and empowered to be their authentic selves, and where our differences and unique perspectives are a key strength. Explore life at Fortune Brands here Additional Information: Fortune Brands believes in fair and equitable pay. A reasonable estimate of the starting base salary range for this role is Pay Range: $20.00 USD - $26.00 USD DOE. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. At Fortune Brands, we support the overall health and wellness of our associates by offering comprehensive, competitive benefits that prioritize all aspects of wellbeing and provide flexibility for our teammates' unique needs. This includes robust health plans, a market-leading 401(k) program with a company contribution, product discounts, flexible time off benefits, inclusive fertility / adoption benefits, and more. We offer numerous Employee Resource Groups to support inclusivity and our associates' feeling of belonging at work. Fortune Brands is a brand, innovation and channel leader focused on exciting, supercharged categories in the home products, security and commercial building markets. Our portfolio of brands includes Moen, House of Rohl, Aqualisa, SpringWell, Therma-Tru, Larson, Fiberon, Master Lock, SentrySafe and Yale residential. Fortune Brands is headquartered in Deerfield, Illinois and trades on the NYSE as FBIN Equal Employment Opportunity: FBIN is an equal employment opportunity employer and does not discriminate against any applicant based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability, marital status, protected veteran status, sexual orientation, genetic history or information, or any other legally protected characteristic. Reasonable Accommodations: FBIN is committed to working with and providing reasonable accommodation to applicants with disabilities. If you need a reasonable accommodation for any part of the application or interview process, please contact us at [email protected] and let us know the nature of your request along with your contact information. Resumes submitted to this email address will not be responded to. To protect yourself from fraudulent job postings or recruitment scams, please note that FBIN job postings are exclusively hosted on our careers page at **********************

About us: At Plexus, our vision is to help create the products that build a better world. Driven by a passion for excellence, we partner with leading Aerospace/Defense, Healthcare/Life Sciences and Industrial companies to design, manufacture and service some of the world's most transformative products, including advanced surgical systems, diagnostic instruments, healthcare imaging equipment, mission critical aerospace systems, and electric vehicle (EV) charging solutions. Visit Plexus.com to learn more about our unwavering commitment to our vision. When we invest in our people, we invest in building a better world. With a vision rooted in the wellbeing and inclusive engagement of our team members, our customers, their end users and our communities, people are the heart of what we do and who we are. It is our values that unite us and guide us in everything that we do, including how we operate, behave and interact to foster a workplace where every team member feels valued and empowered to contribute their best. Our values include: Growing our People, Building Belonging, Innovating Responsibly, Delivering Excellence and Creating Customer Success. As a team member, you will engage in impactful work through global collaboration and the use of emerging technologies, join an inclusive culture where every team member is valued and working toward a greater purpose, and be empowered to reach your full potential through various development programs designed to accelerate your growth. Plexus offers a comprehensive benefits package designed to support team members' wellbeing, including medical, dental, and vision insurance, paid time off, retirement savings, and opportunities for professional development. We also prioritize work-life balance and offer a variety of perks to enhance the team member experience. For more information, visit our US benefits website at usbenefits.plexus.com. Our commitment to pay range transparency fosters an equitable workplace, where everyone can feel valued. The annual compensation range for this position is stated below. The salary offered within this range will be based upon the geographic location, work experience, education, licensure requirements and/or skill level. Salary Range: $43,100.00 - $64,700.00 Purpose Statement: The Quality Technician II is responsible for assuring all customer and company quality expectations are being satisfied through all manufacturing and inspection process steps. Identify and implement continuous quality improvement activities. Key Job Accountabilities: Provide effective functional support of assigned Quality and Supplier Quality processes, goods and services, to meet functional department and customers' requirements. Support Customer Returned Goods functions and non conforming material Adapts to changes (work plan, priority and management decision) in the work environment, Supports improvement initiatives and participates actively to improve work environment (example 6S), Looks for opportunities to improve work productivity and efficiency Lead development and direction of Quality Inspectors. Lead quality plan implementation through data compilation and analysis. Education/Experience Qualifications: Typically requires a minimum of 1 - 2 years of related experience. A combination of education, experience, and time in field will be taken into consideration, and internal candidates may have distinct requirements tailored to their demonstrated skills and contributions within the organization. Other Qualifications: Intermediate computer skills Intermediate decision making, problem solving skills Basic verbal and written communication skills Intermediate execution Intermediate operational knowledge Intermediate influence Intermediate data modeling and manipulation knowledge Basic manufacturing Basic workmanship standard knowledge Basic innovation Customer focus Basic technical judgment General office equipment and materials Physical Requirements: Role will support operational teams in a manufacturing environment with required personal protective equipment. Facilities include comfortable temperatures, repetitive low noise level and suitable lighting for required tasks. May require walking, standing and sitting, using a computer, and other office equipment. Direct interaction with people and equipment is event driven and will include activities related to inspecting, qualifying, troubleshooting and improving jigs, fixtures, and manufacturing methods using different types of components or material. Role may require working individually on tasks with a prolonged focus on written material, working collectively as part of a team of various disciplines and backgrounds and working in multiple software systems. Travel Requirements: Less than 40% This document does not represent a contract of employment and is not intended to capture every possible assignment the incumbent could be asked to perform. We are pleased to provide reasonable accommodations to individuals with disabilities or special requirements. If you need an application accommodation, please contact us by email at *****************. Please include your contact information and clearly describe how we can help you. This email is for accommodation requests only and cannot be used to inquire about the status of applications. We are an Equal Opportunity Employer (EOE) and do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Some offers of employment are contingent upon successfully passing a drug screen and/or background check.

The Manufacturing Quality Technician is accountable for protecting our customers by ensuring only compliant materials enter and exit the plant. This role combines comprehensive inspection and testing of incoming raw materials, in-process components, and finished composite decking products with data-driven analysis to prevent defects and drive continuous improvement. Responsibilities include auditing quality processes, maintaining documentation and calibrations, and communicating issues to support timely resolution. By identifying process improvement opportunities and collaborating cross-functionally, the technician helps ensure product reliability, operational efficiency, and customer satisfaction. 12.5 hour shifts available; A shift; Sunday, Monday, Tuesday, every other Saturday 6:30am to 7:00pm C shift Wednesday, Thursday, Friday, every other Saturday 6:30am to 7:00pm Starting Wage DOE and Qualification is $24.00 per hour Key Responsibilities: Technical Knowledge The individual in this role must have a thorough understanding of quality control including: * Measurement and test equipment use and calibrations including hand tools, gauges, optical tools, balances, color meters, and force measuring instruments. * Accurate data entry and analysis methods. * Quality management system compliance. * Process improvement and problem-solving approaches. * Area management and housekeeping best practices. * Risk assessment reasoning. * Nonconforming materials and rework handling. * Sampling plans and proper sample preparation. * Inspection techniques and processes. * Auditing. Core Skills The individual in this role must demonstrate mastery in the following areas: * Writing Skills: Write clear, simple sentences, complete technical forms, and apply basic math concepts like estimation and spatial reasoning. * Reading Skills: Interpret manuals, safety instructions, reports, and understand images, graphs, and coding systems in the work area. * Oral Skills: Communicate effectively, respond to questions, and collaborate with supervisors and team members to support plant improvements. * Motivation: Take responsibility for assignments, improve skills, and set personal goals with actionable strategies. * Integrity: Be honest with company property and time, communicate respectfully, and resolve conflicts constructively. * Reliability: Maintain punctuality, stay composed in stressful situations, and work effectively in a structured environment. Arrive fit for duty each shift.

The role of the Procurement Engineer offers extensive on-site supply chain support by integrating a dedicated team member within the project team. This person acts as the main contact for all supply chain and procurement activities, ensuring smooth project execution, efficient cost management, and robust supplier relationships. - Project Integration & Communication: Acts as the main link between the project team, ACCO departments, and external suppliers. Attends project meetings to update the team on procurement needs and delays, and assists ACCO staff professionally. - On-Site Setup & Administration: Manages jobsite setup, including office trailers and essential services. - Procurement Log: Creates and maintains procurement logs. - Budget & Procurement Management: Oversees the budget and buyout for project equipment, materials, and services. Ensures timely ordering, negotiates with vendors for competitive pricing, processes purchase orders and change orders, and tracks equipment delivery. - Invoice & Financial Management: Manages the Medius queue, validates invoice pricing, reviews change order requests, and confirms receipt of invoiced items. Prepares invoice packages and verifies prices against purchase orders. - P.O. & Subcontract Management: Ensures accurate committed costs and timely execution of subcontracts. Manages subcontractor enrollment and can issue subcontracts in special situations. - Equipment Rental Management: Uses existing agreements or negotiates new ones for equipment rental. Performs rent vs. buy analysis and tracks rented equipment. - Supplier Management: Acts as a link to ACCO's suppliers, resolving issues like credit holds or payment problems. Coordinates returns and credit memos, maintains vendor relationships, and keeps updated vendor lists. Understands vendor products, price trends, and handles warranty items. - Logistics Support: Sources and manages transportation suppliers for project needs, overseeing costs. - Project Close Out: Validates all PO/subcontract values, ensures all invoices are submitted and paid, and manages the closeout of open commitments. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - Minimum 3-5 years of experience in a procurement position. - Working knowledge of H.V.A.C. parts and equipment required. - Knowledge of local manufacturers' representatives and dealers. - Knowledge of local contractors including electrical, general, crane, etc. - Ability to demonstrate accuracy and a detail-oriented approach to data entry.

Job Description Reliability Engineer The Reliability Engineer monitors equipment condition and reviews equipment performance against plan, providing consultation and technical support targeting equipment reliability and the reduction of equipment costs. This is, at a high level, through the identification and elimination of sources of defects and the implementation of maintenance and operational improvements. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Conduct regular and formal downtime analysis for critical equipment - including but not limited to, crushers, pumps and conveyors, hoists, chiller plant, mechanical mining equipment and underground mobile fleet. Use that information to identify, quantify and prompt the implementation of initiatives that will improve overall equipment reliability, cost outcomes and performance. Produce reliability-based content for the site monthly operations report. Include metrics such as cost impact of plant reliability, work management KPIs, etc. Coordinate the site Condition Monitoring program, providing technical guidance in the areas of OA, VA, MPI/UT, thermography etc. Use a formal Defect Elimination process to identify repetitive equipment failures and promote pro-active maintenance activities designed to maximize sustained reliability performance and to ensure preventive maintenance activities support the overall reliability program. Lead maintenance cost reduction and reliability improvement projects as required. Perform FMEA (Failure Modes and Effects Analysis) on all changes to maintenance tactics (PM's). Manage a formal ongoing PMO (Preventative Maintenance Optimization) program. Facilitate/lead root cause failure analysis as required, using relevant systematic RCA techniques. Identify and support the implementation of resultant corrective actions ensuring all analyses and activities are appropriately documented. Alert the Maintenance and Operations Foremen to situations of equipment abuse and operations practices which induce failures, reduces reliability or increases the equipment maintenance cost. Provide technical guidance to the maintenance and operations departments on equipment and reliability issues and technologies. Work with peers at other company operations to collaborate and share good practices across the group. Remain abreast of current and new technologies applicable to the Mine and champion those that will benefit the operation. Cultivate productive partnerships with key OEMs (Original Equipment Manufacturers) to drive improvement in equipment performance and reliability. Work with purchasing, engineering, and operations to ensure equipment reliability is considered throughout all planning, equipment procurement and changes, spare part selection and inventory control. Develop, adapt and publish Standards and Guidelines that improve equipment reliability, including but not limited to areas such as PM, equipment procurement, inventory parts, installation, and work execution. Audit and maintain the equipment structure lists in ERP system ensuring the data is accurate and the hierarchies are suitable. QUALIFICATIONS Bachelor's degree in mechanical engineering, electrical engineering or a related field with a minimum of 2-3 years in a similar role. Experience in mining industry preferred, including a general knowledge of surface, underground and concentrator operations. Must be computer literate and proficient in Excel, Word, and Outlook. Experience with computerized maintenance management systems required. Experience with IFS preferred.

General Job Description: This Procurement Engineer role provides comprehensive on-site supply chain assistance, embedding a dedicated employee within the project team. This individual serves as the primary point of contact for all supply chain and procurement-related activities, ensuring seamless project execution, effective cost control, and strong supplier relationships. Supervises: n/a Essential Duties & Responsibilities Project Integration & Communication: This role serves as the primary liaison between the project team, ACCO departments (Purchasing, Fleet, Logistics, Accounts Payable), and all external suppliers. The Procurement Engineer participates in project meetings to keep the team informed on procurement needs and potential delays, and also assists ACCO personnel in a professional and timely manner. On-Site Setup & Administration: The Procurement Engineer manages jobsite setup, including office trailers and essential services. Procurement Log: Creates and maintains procurement logs Budget & Procurement Management: This position oversees the budget and buyout for all project equipment, materials, and services, ensuring timely ordering and managing submittal requests. They are responsible for negotiating with vendors to ensure competitive pricing and availability, processing purchase orders and change orders, and tracking equipment release and delivery against project schedules. Invoice & Financial Management: The Procurement Engineer manages the Medius queue, validates invoice pricing, and reviews change order requests. They confirm receipt of all invoiced items. Prepare invoice packages as directed for purposes of billing or other project-specific needs and verify prices against POs and supporting documentation. P.O. & Subcontract Management: This individual ensures accurate committed costs and manages the timely execution of subcontracts. They also oversee subcontractor enrollment in project-specific programs and can issue subcontracts in unique situations. Equipment Rental Management: The role involves utilizing existing agreements or negotiating new ones for equipment rental. The Procurement Engineer performs rent vs. buy analysis and tracks equipment on rent to ensure accurate charges. Supplier Management: This position acts as a conduit for project needs to ACCO's supplier base, finding solutions and resolving issues like credit holds or payment problems. They are also responsible for coordinating returns and credit memos, maintaining professional relationships with vendors, and keeping updated authorized vendor lists. Furthermore, they maintain an understanding of vendor products, price trends, and hard-to-find parts, and handle warranty items and core credits. Logistics Support: The Procurement Engineer sources and manages transportation suppliers for project needs. They oversee costs throughout the project duration. Project Close Out: This role validates all PO/subcontract values and ensures all invoices are submitted and paid. They manage the closeout of open commitments to reconcile job costs. Other Duties: The Procurement Engineer performs any other duties as assigned by their supervisor. Position Requirements (Education, Work Experience, Skills, Certifications, Licenses, etc.): Strong verbal communication and listening skills, both over the phone and in person. Strong business writing skills, including the use of proper grammar and terminology. Ability to demonstrate high customer service skills. Ability to organize large amounts of information while maintaining attention to detail. Minimum 3-5 years of experience in a related position or industry. H.S. Diploma or equivalent. College course in a related field (Business, Economics, Management) is preferred. Proficiency in Invoice Processing & Finvari Support or single emphasis point of AFE, Online Accounts, Misapplied Costs, Bidtracer Contact Management, Diverse Businesses, SQM, IT Support, or ACCO Online Store within the first 4 weeks. Working knowledge of H.V.A.C. parts and equipment required. Knowledge of local manufacturers' representatives and dealers. Knowledge of local contractors including electrical, general, crane, etc. Ability to demonstrate accuracy and a detail-oriented approach to data entry. Proficient-plus level user of MS Excel and MS Word. ACCO Competencies: Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Insight: The ability to gather and make sense of information that suggests new possibilities. Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people. Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success. Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals, takes responsibility and shows personal humility. Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change. Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. Physical Requirements: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) The employee may regularly lift and/or move up to 10 pounds, and occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include Close vision and Distance vision. While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is regularly required to walk and sit, as well as climb, balance, stoop, kneel, crouch, or crawl (for purposes of assisting with project job walks and site inspections). The employee is occasionally required to reach above shoulder height to access storage cabinets and shelves. Hours: This is an exempt position. Workdays are scheduled from Monday through Friday. Typically, work hours begin and end between 7:00 am and 5:00 pm as scheduled with the position's supervisor. Occasional overtime may be necessary per business needs. Travel: 0 -5% of the time to and from the assigned office.

onsemi is currently seeking a hands-on Process Engineer to work as a CFA Process Engineer. A Manufacturing CFA Shift Process Engineer with ON Semiconductor in Nampa works on a shift team to support the manufacture of Image Sensor product lines. The primary responsibility of the Manufacturing CFA Shift Process Engineer is to sustain Color Filter Array (CFA) manufacturing processes, including photolithography, wet processes, dry etch, metrology, and real-time defect analysis (RDA), and to drive engineering issues to resolution. Requirements: The successful candidate will have, at a minimum, a bachelor's degree in engineering and/or 2+ years of industrial experience in a manufacturing or development environment. Excellent analytical, organizational, planning, and problem-solving/troubleshooting skills. Proven ability to identify, assess, and solve problems. Experience with project management. Experience with data-driven continuous improvement Comfortable in a fast-paced engineering and manufacturing environment. Well-developed interpersonal and communication skills, and the ability to manage conflict in a stressful environment. Understands and listens to team members and fosters a productive team environment. Handles multiple projects and priorities. Must be able to work independently with limited supervision. Proficient in advanced techniques with relevant software: Camstar, SPACE, RMS, APC, Excel, PowerPoint, Word, etc. Key Duties and Responsibilities • Develop an in-depth understanding of how the CFA process is performed to be able to diagnose issues that occur during this process • Apply statistical process control (SPC) and data analysis skills to investigate process control charts, react to out of control/specification (OOC/OOS) conditions, and implement corrective actions • Develop engineering skills to evaluate process results using statistical methods, implement solutions, and help recommend/drive process yield improvements • Identify key manufacturing issues and lead cross-functional teams to develop solutions • Maintaining, characterizing, and improving process performance for efficient imager CFA development work. • Working with the other CFA teams on process, tool, and materials development. • Provide direction for running experiments, special requests, inspections, and metrology tasks for the part types running in the CFA fab. • Document experiments in a clear and concise manner to help train and educate fellow team members. • Develop advanced skills on the metrology equipment to be able to perform in-depth product analysis and data collection • Work closely with the lead and shift engineers on issues seen in the fab and implement solutions Competencies: Self-motivated and independent Approachability & internal customer focus Integrity Action Orientation/Initiative Strong attention to detail Excellent analytical and math skills Strategic Agility & Planning Communication Skills (both written and presentation). Business Acumen Engineering Acumen Cross-functional

Bel, makers of iconic brands including Babybel, The Laughing Cow, Boursin, and GoGo Squeez is a growing global company that values your contributions, strives to create a sense of belonging for everyone and offers career growth and development opportunities, as well as competitive total compensation and meaningful well-being benefits from day one. For All, For Good, our company signature, reflects Bel's commitment to sustainability and healthier and responsible food for all. The company has headquarters in Chicago (Bel Brands USA) and New York City (GoGo Squeez) and operates 5 manufacturing plants in Little Chute, WI; Leitchfield, KY; Brookings, SD; Traverse City, MI; and Nampa, ID. Job description Job Title: Industrial Performance Engineer Reports to: Industrial Performance Manager Number of Direct Reports: 0 Key Internal Partners: Technical Services, Production, Maintenance, Engineering, Supply Chain, Other MNA and MOM Group Continuous Improvement Personnel Key External Partners: Consultants, Suppliers, Local Benchmark Companies Project Management: No Yes Location: Nampa, ID Job Summary: The Industrial Performance Engineer is responsible for working cross-functionally to enhance plant operational and financial performance by developing and rolling out plant wide Continuous Improvement initiatives. They are responsible for leading project teams, leading task force initiatives, planning Kaizen events, and coaching/mentoring others within the organization to apply principles and methodologies of Continuous Improvement. Job Responsibilities & Tasks: Ensure the development, implementation and sustainability of industrial standards and plant processes as assigned by the Industrial Performance Manager. Areas of influence and responsibility may include: industrial procedures, training and qualification standards, maintenance and operational excellence standards (Root Cause Analysis, 6S, Daily Accountability, VPA, Lean Manufacturing principles) and Environmental, Health, Safety and Quality. Seek to identify best practices from other internal plants and plants external to Materne that can be integrated to our plant. Ensure that improvements and lessons learned are shared with the rest of the organization to enhance standardization and increase performance company-wide. Lead or participate in continuous improvement projects or task forces, and deliver measureable, sustainable results. Develop plant employees relative to root cause analysis, continuous improvement principles and methodologies, 5S, etc. thru developing and delivering training, coaching, and mentoring. Uses DMAIC methodology: define, measure, analyze, improve, and control the results Key Performance Indicator (KPI): The Industrial Performance Engineer will have a direct role in influencing the improvement of 6 key performance indicators, namely: Safety, Quality, Cost, Delivery, Motivation, and Environmental. Position Requirements: EDUCATION B.S. degree in a Technical Field or at least 5 years of manufacturing experience preferred. EXPERIENCE 5+ years of manufacturing experience with at least 2 years participating or leading continuous improvement initiatives. Six Sigma Green Belt (or related certification) is preferred. Experience in implementing Lean Manufacturing concepts is preferred. Prior food manufacturing experience is highly preferred. SKILLS Must have completed successful DMAIC / Lean projects in production, quality, or supply chain. Must have strong leadership skills and be able to lead through influence. Must be able to prioritize work. Must be able to adapt to a rapidly changing environment. Must be able to quickly and effectively interpret information in order to reach sound conclusions. Must be able to challenge the status quo in a professional manner. Must have a passion for being on the plant floor and interacting with employees at all levels. Must have solid written and verbal communication skills. Competency with Microsoft office suite is required. Competency with data collection and analysis as well as good lab notebook practices are also required. PHYSICAL & TRAVEL REQUIREMENTS Must be able to work a minimum of 8 hours per day Must be able lift up to 40 lbs. Must be able to travel via airplane within the US and Internationally. Bel Brands is an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, disability status or any other basis protected by applicable federal, state, or local laws. Bel Brands prohibits harassment of applicants or employees based on any of these protected categories. It is also Bel Brand's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Bel Brands is committed to recruiting, hiring and promoting people with disabilities and veterans. If you need an accommodation or assistance in using the website, please call ************. If you think that this job is for you, please click now on the button "Apply".

onsemi is seeking a Manufacturing Probe Process Engineer with onsemi in Nampa, Idaho, who will support the manufacture and testing of Image Sensor parts. The primary responsibility of the Manufacturing Probe Process Engineer is to sustain probe processes and drive engineering issues to resolution with the objective to minimize impacts to the time it takes to successfully test a given manufacturing lot. The Probe Process Engineer will actively support the shift Probe Technicians and Engineers with issues and events that occur, helping them minimize equipment downtime. Requirements: Bachelors of Science Degree in an engineering discipline or equivalent process engineering experience. Understanding of statistical process control. Excellent data summary and analytical skills. Strong approach for troubleshooting. Strong communication, documentation, and organizational skills. Innovative and self-motivated attitude. Works well both independently and with teams. Ability to follow written or verbal work instructions. Ability to perform duties in a clean room environment. Willingness to work overtime as needed Build knowledge and an understanding of probe processes, become point of contact for probe process issues. Investigate EFAR/IFAR/Assembly issues and support findings efforts. Support the shift Probe Technicians and Engineers with issues that impact testing. Knowledge of the equipment (IP750 testers, Accretech Probers, ESI lasers, Camtek RDA, and Screen scrubbers) will be gained through on-the-job training and working with the equipment owners and the shift technicians/engineers. Attend daily yield meetings and provide guidance to shift eng and ES for any on-going issues Develop engineering skills to evaluate probe results, implement solutions, and make recommendations for process improvements. Identify probe yield and setup issues and work with the appropriate cross-functional teams to develop solutions. Prepare thorough reports for tool issues/improvements, process issues/improvements, and project status reports. Create Work Instructions, BKM's, and any associated training certifications for any new/improved processes. Using and driving yield improvement with SkySight software to identify issues real time and set up pause / hold limits and dashboards Support NPI (New Product Introduction) and transfer to MP (Mass Production) Support MFG Engineer and be able to perform duties as a backup Support in data collection and analysis for any experiments performed by Probe Equipment team. Camtek recipe writing - New recipes for Fuse Inspection, Post Probe Inspection, and PMI. Also training/mentoring Shift Eng.

Founded in 1997, Fiberon is a leading U.S. manufacturer of wood-alternative decking, railing and cladding distributed worldwide. Fortune Brands Innovations (NYSE: FBIN) added the business to their industry leading brands in 2018. Our company purpose is “Fulfilling the Dreams of Home”. Home is the place where we feel safe, make memories and connect with one another, and where we can be our best, authentic selves. Fortune Brands Innovations operates in the high-growth categories of water, outdoors and security, which are powered by strong tailwinds and underpinned by our leading brands. Behind those brands is the Fortune Brands Advantage, our capabilities that empower us to execute in any environment. We are dedicated to fostering a culture that ensures maximum equipment reliability, process efficiency, and effective associate engagement. We are seeking a dynamic and experienced Quality Technician to be a leader in our initiatives and drive continuous improvement. Job Description The Manufacturing Quality Technician is accountable for protecting our customers by ensuring only compliant materials enter and exit the plant. This role combines comprehensive inspection and testing of incoming raw materials, in-process components, and finished composite decking products with data-driven analysis to prevent defects and drive continuous improvement. Responsibilities include auditing quality processes, maintaining documentation and calibrations, and communicating issues to support timely resolution. By identifying process improvement opportunities and collaborating cross-functionally, the technician helps ensure product reliability, operational efficiency, and customer satisfaction. 12.5 hour shifts available; A shift; Sunday, Monday, Tuesday, every other Saturday 6:30am to 7:00pm C shift Wednesday, Thursday, Friday, every other Saturday 6:30am to 7:00pm Starting Wage DOE and Qualification is $24.00 per hour Key Responsibilities: Technical Knowledge The individual in this role must have a thorough understanding of quality control including: Measurement and test equipment use and calibrations including hand tools, gauges, optical tools, balances, color meters, and force measuring instruments. Accurate data entry and analysis methods. Quality management system compliance. Process improvement and problem-solving approaches. Area management and housekeeping best practices. Risk assessment reasoning. Nonconforming materials and rework handling. Sampling plans and proper sample preparation. Inspection techniques and processes. Auditing. Core Skills The individual in this role must demonstrate mastery in the following areas: Writing Skills : Write clear, simple sentences, complete technical forms, and apply basic math concepts like estimation and spatial reasoning. Reading Skills : Interpret manuals, safety instructions, reports, and understand images, graphs, and coding systems in the work area. Oral Skills : Communicate effectively, respond to questions, and collaborate with supervisors and team members to support plant improvements. Motivation : Take responsibility for assignments, improve skills, and set personal goals with actionable strategies. Integrity : Be honest with company property and time, communicate respectfully, and resolve conflicts constructively. Reliability : Maintain punctuality, stay composed in stressful situations, and work effectively in a structured environment. Arrive fit for duty each shift. Qualifications Minimum Qualifications: Required Ability to work 12-hour shifts in a continuous manufacturing environment. Willingness to work overtime, holidays, and weekends as scheduled. Proficiency with using a computer. Proficiency using Microsoft Office Suite products. Proficiency differentiating shades of color. Ability to operate a forklift. Strong cross-functional communication skills. At least 18 years of age. Preferred High School Diploma or GED. Strong English, reading, and writing skills for career advancement, including the ability to interpret safety rules, operating instructions, maintenance manuals, and procedural documents. Previous forklift operation experience. Previous manufacturing experience. Physical Requirements The physical requirements outlined below represent those necessary for an employee to successfully perform the essential functions of this role. Reasonable accommodations may be provided for individuals with disabilities. Lift, push, and pull, up to 50 pounds. Stand and walk around for a 12.5+ hour shift. Perform physical tasks such as bending, squatting, and kneeling. Ability to operate various different styles of forklifts Wear and operate required safety equipment, including earplugs and safety shoes and glasses. Must have proficient color shade sight for materials inspection. Read printed reports and data displayed on computer screens. Fine motor skills to operate tools, including chop saws, staple guns, calipers and other test equipment. The use of personal protective equipment (PPE), such as safety eyewear, steel-toed boots, and hearing protection, is mandatory in designated areas. While performing the duties of this Job, the employee is often exposed to hot and wet and/or humid conditions; occasionally moving mechanical parts and vibration. The noise level in the work environment is usually moderate. Additional Information Company Description: Fortune Brands Innovations, Inc. is an industry-leading innovation company focused on creating smarter, safer and more beautiful homes and improving lives. Our driving purpose is that we elevate every life by transforming spaces into havens. We believe our work and our brands can have incredibly positive impacts for not just our business and shareholders, but for people and the planet, too. When you join Fortune Brands, you become part of a high-performing team who are empowered to think big, learn fast and make bold decisions. We support an inclusive and diverse culture where everyone is encouraged and empowered to be their authentic selves, and where our differences and unique perspectives are a key strength. Explore life at Fortune Brands here Additional Information: Fortune Brands believes in fair and equitable pay. A reasonable estimate of the starting base salary range for this role is Pay Range: $20.00 USD - $26.00 USD DOE. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. At Fortune Brands, we support the overall health and wellness of our associates by offering comprehensive, competitive benefits that prioritize all aspects of wellbeing and provide flexibility for our teammates' unique needs. This includes robust health plans, a market-leading 401(k) program with a company contribution, product discounts, flexible time off benefits, inclusive fertility / adoption benefits, and more. We offer numerous Employee Resource Groups to support inclusivity and our associates' feeling of belonging at work. Fortune Brands is a brand, innovation and channel leader focused on exciting, supercharged categories in the home products, security and commercial building markets. Our portfolio of brands includes Moen, House of Rohl, Aqualisa, SpringWell, Therma-Tru, Larson, Fiberon, Master Lock, SentrySafe and Yale residential. Fortune Brands is headquartered in Deerfield, Illinois and trades on the NYSE as FBIN Equal Employment Opportunity: FBIN is an equal employment opportunity employer and does not discriminate against any applicant based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability, marital status, protected veteran status, sexual orientation, genetic history or information, or any other legally protected characteristic. Reasonable Accommodations: FBIN is committed to working with and providing reasonable accommodation to applicants with disabilities. If you need a reasonable accommodation for any part of the application or interview process, please contact us at [email protected] and let us know the nature of your request along with your contact information. Resumes submitted to this email address will not be responded to. To protect yourself from fraudulent job postings or recruitment scams, please note that FBIN job postings are exclusively hosted on our careers page at ********************* .

Bel, makers of iconic brands including Babybel, The Laughing Cow, Boursin, and GoGo Squeez is a growing global company that values your contributions, strives to create a sense of belonging for everyone and offers career growth and development opportunities, as well as competitive total compensation and meaningful well-being benefits from day one. For All, For Good, our company signature, reflects Bel's commitment to sustainability and healthier and responsible food for all. The company has headquarters in Chicago (Bel Brands USA) and New York City (GoGo Squeez) and operates 5 manufacturing plants in Little Chute, WI; Leitchfield, KY; Brookings, SD; Traverse City, MI; and Nampa, ID. Job description Job Title: Industrial Performance Engineer Reports to: Industrial Performance Manager Number of Direct Reports: 0 Key Internal Partners: Technical Services, Production, Maintenance, Engineering, Supply Chain, Other MNA and MOM Group Continuous Improvement Personnel Key External Partners: Consultants, Suppliers, Local Benchmark Companies Project Management: No Yes Location: Nampa, ID Job Summary: The Industrial Performance Engineer is responsible for working cross-functionally to enhance plant operational and financial performance by developing and rolling out plant wide Continuous Improvement initiatives. They are responsible for leading project teams, leading task force initiatives, planning Kaizen events, and coaching/mentoring others within the organization to apply principles and methodologies of Continuous Improvement. Job Responsibilities & Tasks: * Ensure the development, implementation and sustainability of industrial standards and plant processes as assigned by the Industrial Performance Manager. * Areas of influence and responsibility may include: industrial procedures, training and qualification standards, maintenance and operational excellence standards (Root Cause Analysis, 6S, Daily Accountability, VPA, Lean Manufacturing principles) and Environmental, Health, Safety and Quality. * Seek to identify best practices from other internal plants and plants external to Materne that can be integrated to our plant. * Ensure that improvements and lessons learned are shared with the rest of the organization to enhance standardization and increase performance company-wide. * Lead or participate in continuous improvement projects or task forces, and deliver measureable, sustainable results. * Develop plant employees relative to root cause analysis, continuous improvement principles and methodologies, 5S, etc. thru developing and delivering training, coaching, and mentoring. * Uses DMAIC methodology: define, measure, analyze, improve, and control the results Key Performance Indicator (KPI): The Industrial Performance Engineer will have a direct role in influencing the improvement of 6 key performance indicators, namely: Safety, Quality, Cost, Delivery, Motivation, and Environmental. Position Requirements: EDUCATION * B.S. degree in a Technical Field or at least 5 years of manufacturing experience preferred. EXPERIENCE * 5+ years of manufacturing experience with at least 2 years participating or leading continuous improvement initiatives. * Six Sigma Green Belt (or related certification) is preferred. * Experience in implementing Lean Manufacturing concepts is preferred. * Prior food manufacturing experience is highly preferred. SKILLS * Must have completed successful DMAIC / Lean projects in production, quality, or supply chain. * Must have strong leadership skills and be able to lead through influence. * Must be able to prioritize work. * Must be able to adapt to a rapidly changing environment. * Must be able to quickly and effectively interpret information in order to reach sound conclusions. * Must be able to challenge the status quo in a professional manner. * Must have a passion for being on the plant floor and interacting with employees at all levels. * Must have solid written and verbal communication skills. * Competency with Microsoft office suite is required. * Competency with data collection and analysis as well as good lab notebook practices are also required. PHYSICAL & TRAVEL REQUIREMENTS * Must be able to work a minimum of 8 hours per day * Must be able lift up to 40 lbs. * Must be able to travel via airplane within the US and Internationally. Bel Brands is an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, disability status or any other basis protected by applicable federal, state, or local laws. Bel Brands prohibits harassment of applicants or employees based on any of these protected categories. It is also Bel Brand's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Bel Brands is committed to recruiting, hiring and promoting people with disabilities and veterans. If you need an accommodation or assistance in using the website, please call ************. If you think that this job is for you, please click now on the button "Apply".

Job Description The Quality Engineer is responsible for ensuring that products, processes, and systems meet the highest standards of quality and reliability. This role supports the design, manufacturing, and field teams by developing and maintaining quality assurance processes, conducting root cause analyses, implementing corrective actions, and driving continuous improvement initiatives. The ideal candidate will be analytical, detail-oriented, and proactive in identifying risks and improvement opportunities. The Quality Engineer will serve as a bridge between Engineering, Manufacturing, Supply Chain, and Field Service to ensure that customer expectations are consistently exceeded. Accountabilities: Support and maintain the company's Quality Management System (QMS) in compliance with ISO and industry standards. Develop and update inspection procedures, control plans, and work instructions to ensure consistent product quality. Oversee and validate effectiveness of first article inspections (FAI), in-process audits, and final inspections to verify product conformance. Review and approve supplier and manufacturing documentation for accuracy and compliance. Assist with internal, supplier, and customer audits to ensure adherence to regulatory and contractual requirements. Lead, document and close out root cause investigations for nonconformances, customer complaints, and audit findings. Develop, implement, and verify corrective and preventive actions (CAPA) to prevent recurrence of issues affecting quality. Facilitate problem-solving using tools such as 5 Whys, Fishbone Analysis, FMEA, 8D, and statistical techniques. Collect, analyze, and report quality metrics (defect rates, rework, scrap, supplier performance, etc.). Partner with cross-functional teams to identify and execute Lean and Six Sigma initiatives. Support process capability studies, measurement system analysis, and other data-driven evaluations. Recommend design or process changes to improve product reliability, manufacturability, and efficiency. Collaborate with Supply Chain, Engineering and Operations to evaluate supplier performance and drive improvements. Support manufacturing teams with quality-related issues including training, documentation, and process control. Design processes that ensure that materials, components, and assemblies meet technical and contractual requirements. Assist with new product introductions (NPI) to ensure quality is built into every stage of design and production. Serve as a quality representative for customer interactions, audits, and field issue resolution. Provide timely and professional communication regarding quality issues and resolutions. Partner with Field Service and Engineering to evaluate and resolve field performance or warranty concerns. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Attributes Safety First: Promotes and ensures a safe working environment. Have Humanity: Builds trust and empathy through honest, respectful communication. Be Transparent: Communicates clearly and proactively across all levels. Drive Innovation: Seeks out creative solutions and process improvements. Be Resilient: Thrives in a dynamic environment and adapts to challenges. Always Reliable: Consistently delivers high-quality work with integrity. Grit: Demonstrates determination, ownership, and accountability in achieving results. Required Knowledge/Experience: Bachelor's degree in Engineering, Quality, or a related technical field (or equivalent experience). 3-7 years of experience in quality engineering within a manufacturing, industrial, or electrical systems environment. Working knowledge of ISO 9001, UL, ASME, and other quality standards. Experience in root cause analysis, CAPA, and statistical process control (SPC). Familiarity with Lean, Six Sigma, or other continuous improvement methodologies (certification preferred). Proficient in reading mechanical and electrical drawings, schematics, and technical documentation. Strong understanding of measurement tools, GD&T, and inspection processes. Excellent communication and documentation skills; able to interface effectively with suppliers, customers, and all levels of the organization. Proficient with Microsoft Office and quality management software (QMS, ERP, or similar). Strong analytical, organizational, and problem-solving abilities. Ability to work independently and collaboratively in a fast-paced environment. Powered by JazzHR dro X2T84cS

onsemi is seeking a Manufacturing Probe Process Engineer with onsemi in Nampa, Idaho, who will support the manufacture and testing of Image Sensor parts. The primary responsibility of the Manufacturing Probe Process Engineer is to sustain probe processes and drive engineering issues to resolution with the objective to minimize impacts to the time it takes to successfully test a given manufacturing lot. The Probe Process Engineer will actively support the shift Probe Technicians and Engineers with issues and events that occur, helping them minimize equipment downtime. Requirements: Bachelors of Science Degree in an engineering discipline or equivalent process engineering experience. Understanding of statistical process control. Excellent data summary and analytical skills. Strong approach for troubleshooting. Strong communication, documentation, and organizational skills. Innovative and self-motivated attitude. Works well both independently and with teams. Ability to follow written or verbal work instructions. Ability to perform duties in a clean room environment. Willingness to work overtime as needed Build knowledge and an understanding of probe processes, become point of contact for probe process issues. Investigate EFAR/IFAR/Assembly issues and support findings efforts. Support the shift Probe Technicians and Engineers with issues that impact testing. Knowledge of the equipment (IP750 testers, Accretech Probers, ESI lasers, Camtek RDA, and Screen scrubbers) will be gained through on-the-job training and working with the equipment owners and the shift technicians/engineers. Attend daily yield meetings and provide guidance to shift eng and ES for any on-going issues Develop engineering skills to evaluate probe results, implement solutions, and make recommendations for process improvements. Identify probe yield and setup issues and work with the appropriate cross-functional teams to develop solutions. Prepare thorough reports for tool issues/improvements, process issues/improvements, and project status reports. Create Work Instructions, BKM's, and any associated training certifications for any new/improved processes. Using and driving yield improvement with SkySight software to identify issues real time and set up pause / hold limits and dashboards Support NPI (New Product Introduction) and transfer to MP (Mass Production) Support MFG Engineer and be able to perform duties as a backup Support in data collection and analysis for any experiments performed by Probe Equipment team. Camtek recipe writing - New recipes for Fuse Inspection, Post Probe Inspection, and PMI. Also training/mentoring Shift Eng.

onsemi is currently seeking a hands-on Process Engineer to work as a CFA Process Engineer. A Manufacturing CFA Shift Process Engineer with ON Semiconductor in Nampa works on a shift team to support the manufacture of Image Sensor product lines. The primary responsibility of the Manufacturing CFA Shift Process Engineer is to sustain Color Filter Array (CFA) manufacturing processes, including photolithography, wet processes, dry etch, metrology, and real-time defect analysis (RDA), and to drive engineering issues to resolution. Requirements: The successful candidate will have, at a minimum, a bachelor's degree in engineering and/or 2+ years of industrial experience in a manufacturing or development environment. Excellent analytical, organizational, planning, and problem-solving/troubleshooting skills. Proven ability to identify, assess, and solve problems. Experience with project management. Experience with data-driven continuous improvement Comfortable in a fast-paced engineering and manufacturing environment. Well-developed interpersonal and communication skills, and the ability to manage conflict in a stressful environment. Understands and listens to team members and fosters a productive team environment. Handles multiple projects and priorities. Must be able to work independently with limited supervision. Proficient in advanced techniques with relevant software: Camstar, SPACE, RMS, APC, Excel, PowerPoint, Word, etc. Key Duties and Responsibilities • Develop an in-depth understanding of how the CFA process is performed to be able to diagnose issues that occur during this process • Apply statistical process control (SPC) and data analysis skills to investigate process control charts, react to out of control/specification (OOC/OOS) conditions, and implement corrective actions • Develop engineering skills to evaluate process results using statistical methods, implement solutions, and help recommend/drive process yield improvements • Identify key manufacturing issues and lead cross-functional teams to develop solutions • Maintaining, characterizing, and improving process performance for efficient imager CFA development work. • Working with the other CFA teams on process, tool, and materials development. • Provide direction for running experiments, special requests, inspections, and metrology tasks for the part types running in the CFA fab. • Document experiments in a clear and concise manner to help train and educate fellow team members. • Develop advanced skills on the metrology equipment to be able to perform in-depth product analysis and data collection • Work closely with the lead and shift engineers on issues seen in the fab and implement solutions Competencies: Self-motivated and independent Approachability & internal customer focus Integrity Action Orientation/Initiative Strong attention to detail Excellent analytical and math skills Strategic Agility & Planning Communication Skills (both written and presentation). Business Acumen Engineering Acumen Cross-functional

About us: At Plexus, our vision is to help create the products that build a better world. Driven by a passion for excellence, we partner with leading Aerospace/Defense, Healthcare/Life Sciences and Industrial companies to design, manufacture and service some of the world's most transformative products, including advanced surgical systems, diagnostic instruments, healthcare imaging equipment, mission critical aerospace systems, and electric vehicle (EV) charging solutions. Visit Plexus.com to learn more about our unwavering commitment to our vision. When we invest in our people, we invest in building a better world. With a vision rooted in the wellbeing and inclusive engagement of our team members, our customers, their end users and our communities, people are the heart of what we do and who we are. It is our values that unite us and guide us in everything that we do, including how we operate, behave and interact to foster a workplace where every team member feels valued and empowered to contribute their best. Our values include: Growing our People, Building Belonging, Innovating Responsibly, Delivering Excellence and Creating Customer Success. As a team member, you will engage in impactful work through global collaboration and the use of emerging technologies, join an inclusive culture where every team member is valued and working toward a greater purpose, and be empowered to reach your full potential through various development programs designed to accelerate your growth. Plexus offers a comprehensive benefits package designed to support team members' wellbeing, including medical, dental, and vision insurance, paid time off, retirement savings, and opportunities for professional development. We also prioritize work-life balance and offer a variety of perks to enhance the team member experience. For more information, visit our US benefits website at usbenefits.plexus.com. Our commitment to pay range transparency fosters an equitable workplace, where everyone can feel valued. The annual compensation range for this position is stated below. The salary offered within this range will be based upon the geographic location, work experience, education, licensure requirements and/or skill level. Salary Range: $58,100.00 - $87,100.00 Are you a problem-solver who thrives in fast-paced environments and craves variety? We are looking for adaptable, highly motivated engineers to join the Plexus Technical Execution & Development (TED) Program. The TED Program deploys technical experts to critical manufacturing sites to ensure our most complex product launches succeed. If you have the desire to travel and the drive to become a future technical leader, we have the platform to get you there. We provide the mentorship and the challenges; you provide the grit and the mobility. The mission is twofold: 1. Execution: To expand the technical bandwidth of Customer Focus Teams (CFT's) and accelerate NPI execution during critical launch phases. 2. Development: To forge highly skilled, adaptable engineers through multi-site exposure to critical NPI launches across various market sectors , establishing a solid foundation for potential future leadership and Subject Matter Expert (SME) roles. Key Job Accountabilities: * Tactical Deployment: Relocate to key manufacturing sites (Appleton WI, Boise ID, Chicago IL, Neenah WI) for temporary assignments (typically 3-12 months) aligned with critical NPI program needs. * NPI Execution: Provide immediate, on-the-ground technical support by integrating with the CFT team and reporting to the site NPI Engineering Leader. * Focused Support: Contribute to one or more of the following NPI focus areas based on business priority: * Product Engineering: Support validation activity, failure analysis, and create & manage work instructions and process flows. * Process Engineering: Assist in developing and qualifying new manufacturing processes and tooling. * Supplier Quality Engineering: Assist with component qualification and supplier issue resolution. * Quality Engineering: Support quality planning, validation activity, data analysis, and corrective actions. * Test Engineering: Help validate and support test platform commissioning and performance. * Mentorship & Development: Actively engage with dedicated mentorship from the NPI Engineering Leader and NPI SMEs to rapidly develop technical and professional skills. * Continuous Improvement: Identify and help implement process improvements and feed best practices back to the NPI and SME teams. Education/Experience Qualifications: * A minimum of a Bachelor's Degree, or equivalent experience, is required. * A minimum of a Bachelor's Degree, or equivalent experience, and 1-2 years of relevant work experience, is preferred. * Ideal candidates may have a degree in Mechanical, Electrical, or Biomedical Engineering, but other technical backgrounds will be considered. * This program is designed for engineers that have a drive to deliver results in a fast paced environment, are open to inter-disciplinary assignments, and interested in developing subject matter expertise for new product introductions. Other Qualifications: * Highly Motivated & Driven: A strong work ethic, prepared for the intensity of NPI launches. * Adaptable & Eager to Learn: Enthusiastic about facing new challenges and working in a fast-paced environment. * Mobility & Globally Minded: Willing to relocate and excited by the opportunity to work in different locations and cultures. * Problem-Solving & Communication: Strong problem-solving, communication, and organizational skills. * Learning Agility: Ability to learn from experience and adapt quickly when plans change. * Commitment: Ready to fully immerse in the program and the Plexus culture. Work Environment: * The work setting will be a mix of an office environment and a light manufacturing environment. * A two year program commitment is required. * Short term relocations for 3-12 months are required. This document does not represent a contract of employment and is not intended to capture every possible assignment the incumbent could be asked to perform. We are pleased to provide reasonable accommodations to individuals with disabilities or special requirements. If you need an application accommodation, please contact us by email at *****************. Please include your contact information and clearly describe how we can help you. This email is for accommodation requests only and cannot be used to inquire about the status of applications. We are an Equal Opportunity Employer (EOE) and do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Some offers of employment are contingent upon successfully passing a drug screen and/or background check.

onsemi is currently seeking a hands-on Process Engineer to work as a CFA Process Engineer. A Manufacturing CFA Shift Process Engineer with onsemi in Nampa works on a shift team to support the manufacture of Image Sensor product lines. The primary responsibility of the Manufacturing CFA Shift Process Engineer is to sustain Color Filter Array (CFA) manufacturing processes, including photolithography, wet processes, dry etch, metrology, and real-time defect analysis (RDA), and to drive engineering issues to resolution.

**onsemi** is seeking a Manufacturing Probe Process Engineer with **onsemi** in Nampa, Idaho, who will support the manufacture and testing of Image Sensor parts. The primary responsibility of the Manufacturing Probe Process Engineer is to sustain probe processes and drive engineering issues to resolution, with the objective of minimizing the time required to successfully test a given manufacturing lot. The Probe Process Engineer will actively support the shift Probe Technicians and Engineers with issues and events that occur, helping them minimize equipment downtime. **onsemi** (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. With a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world. **More details about our company benefits can be found here:** ********************************************** We are committed to sourcing, attracting, and hiring high-performance innovators, while providing all candidates a positive recruitment experience that builds our brand as a great place to work. **onsemi** is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, ancestry, national origin, age, marital status, pregnancy, sex, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, gender identity, gender expression, or any other protected category under applicable federal, state, or local laws. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact ***************************** for assistance.

onsemi is seeking a Manufacturing Probe Process Engineer with onsemi in Nampa, Idaho, who will support the manufacture and testing of Image Sensor parts. The primary responsibility of the Manufacturing Probe Process Engineer is to sustain probe processes and drive engineering issues to resolution, with the objective of minimizing the time required to successfully test a given manufacturing lot. The Probe Process Engineer will actively support the shift Probe Technicians and Engineers with issues and events that occur, helping them minimize equipment downtime.