Quality engineer jobs in Costa Mesa, CA

CMP Services seeks a Engineer IV (Electrical) - Sustainability to support LACCD at Los Angeles Community Collage District program. This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects as defined under the BuildLACCD Bond Program. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with LACCD's Capital Construction Bond Program requirements and legal limitations governing bond fund expenditures. Duties: Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations. Implement the electrification of central plants and other building systems outlined in the Board of trustees' Clean Energy Resolution passed in July 9, 2020. Apply knowledge of Sustainable Building Principles and Standards to assist with complex systemslevel issues. Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives. Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency. Understand Title 24 and ASHRAE recommendations. Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines. Assist College Project Teams (CPT's) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC's), Change Orders, etc. Travelling to and from project sites upon request of attending project and construction meetings. Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout. Perform electrical engineering analysis and technical reports supporting District design guidelines. Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls. Perform other related duties as assigned by the PMO and LACCD. Required Experience: Bachelor's Degree in in Electrical Engineering 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects. Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC),California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards. Preferred Qualifications: 2 years' experience in Educational Facility Construction Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS) California Professional Engineering (PE) license in Electrical Engineering

Plans, coordinates, and directs quality control program designed to ensure continuous quality of products consistent with established standards by performing the following duties personally or through subordinate supervisors. Key Responsibilities Develops and analyzes statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished product. Formulates and maintains quality control objectives complementary to industry policies and goals. Creates and implements inspection criteria and procedures. Facilitates airline audits. Interprets quality control philosophy to key personnel in organization. Coordinates objectives with production procedures in cooperation with other plant managers to maximize product reliability and minimize costs. Provides inspection activity for product throughout service cycle. Directs workers engaged in inspection and testing activities to ensure continuous control over materials, facilities, and products. Analyzes and interprets test data from quality checks on warranty items to determine cause and corrective action, and codes work orders as to responsibility and work to be performed. Maintains and revises accordingly the quality control procedure manuals. Analyzes and interprets new manual revisions and revises test records accordingly. Works with vendors to insure quality of all purchased parts for company use. Creates and directs environmental test functions. Designs and implements quality control training programs to key personnel in conjunction with managers. Coordinates, assists and manages quality audits from customer's representatives. Investigates and adjusts customer complaints regarding quality. Abilities & Qualification Ability to coordinate and work well with other departments and individuals within organization. Have strong team orientation. Proficiency in computer skills (MS Work, Office, Excel). Ability to read, write and understand English and computer literacy is required. Have strong communication and interpersonal skills. Willing to learn and self motivated. Good attitude and always have service mind. Ability to work overtime, shift/weekends when needed. Education Bachelor's degree (B.A./B.S.) or equivalent; or four or more years related experience and/or training; or equivalent combination of education and experience. Minimum 6 years' experience working with FAA.

Responsible for supporting continuous quality oversight and improvement initiatives within the CDS programs. Ensures the implementation of consistent policies and procedures in alignment with California and Federal regulatory requirements and the terms and conditions of funders. Works closely with various teams to enhance program quality, compliance, and continuous improvement across Head Start, state preschool, and other funded programs. Manages and supervises a small staff, and is accountable for their performance and conduct. Starting Pay Range: $100k - 109k/yr Responsibilities Leads efforts to guarantee program quality and compliance by supporting the development and execution of monitoring cycles, self-assessments, and audit or mock audit processes. Supports compliance efforts with regulations set forth by the Department of Health and Human Services under the Head Start Act, as well as California Department of Education Title 5 Funding Terms and Conditions and California Department of Social Services Title 22. Utilizes the management information system to generate integrity reports, data-use dashboards, and monitor interventions. Partners with Area Directors to support the development of management reports and to help ensure accuracy in enrollment, eligibility, and required data collection. Engages with the CDS team in the development and execution of state and federal grant and contracts. Supports Director of Quality to assure timely and accurate communications with entities including not limited to California Department of Education, California Department of Health and Human Services, state and federal offices of Head Start and Agency for Child and Families. Works with the CDS team on the development and interpretation of needs assessments and plans accordingly. Evaluates the effectiveness of staff training to determine the data needs to inform future trainings. Assists the CDS team with the financial monitoring process in collaboration with CDS Finance department. Assures a data-informed approach in the development of region-wide activities to support continuous quality improvement in all child development services. Enhances and ensures program quality, compliance, and continuous improvement across Head Start, state preschool, and other funded programs by leading the design and execution of monitoring cycles, self-assessments, and audit/mock audit processes. Becomes proficient in the ChildPlus management information system to generate integrity reports, data-use dashboards, and monitor interventions. Analyzes findings from monitoring, CLASS, ERS, PIR, and other tools then translating them into actionable Corrective Action Plans and sustainable improvement initiatives. Ensures 100% compliance with Head Start Performance Standards (45 CFR §1302, et seq.), California State Preschool regulations, plus all local/funder-specific requirements. Leads efforts to enhance program quality through continuous improvement initiatives and best practices. Collaborates with program teams to integrate "what we learn" into staff training, procedures, and communications pathways. Reports out trends, compliance metrics, and impact stories to Leadership, Policy Council, funders, and the Board. Ensures consistent application of policies and procedures in alignment with regulatory requirements and funder terms. Oversees and provides guidance to a small team, ensuring accountability for both performance outcomes and professional conduct. Qualifications Minimum 5 years leadership in early childhood, education, or non-profit programs, including quality/compliance oversight and data-driven continuous improvement (aligns with similar Head Start QA roles). Experience in Head Start or state preschool systems-but not required. Excellent interpersonal, training, and communication skills. Strong analytic, reporting, and technical writing abilities. Demonstrated ability to assure compliance within a highly regulated environment. Demonstrated knowledge and experience implementing a Continual Quality Improvement system. Knowledge of policies and procedures of the Head Start Performance Standards, California Education, Child Development Division and the Department of Social Services, Community Care Licensing program regulations, funding terms and conditions (Title 5 and Title 22a). Proficient in ChildPlus or similar data systems-or demonstrated ability to learn. Demonstrated leadership ability; ability to communicate effectively, through oral and written skills, and to motivate others to work cooperatively toward a common goal. Executive presentation skills to present data and trends in a concise and engaging manner. Demonstrated ability to properly interpret and implement policies, procedures, and regulations. Demonstrated ability to exercise sound judgment, establish and meet timelines. Ability to obtain fingerprint clearance per California and/or program requirements. Ability to pass post-offer medical examination. Possession of pediatric (infant/toddler) CPR and first aid certificate.

Job Description Responsible for establishing and continuing eective quality improvement eorts to achieve organizational performance goals and national top decile performance in clinical excellence. Quality improvements may be small or large scale and are in alignment with Hoags strategic goals for example, addressing 30-day readmissions and mortality reduction. The Quality Improvement Manager may apply Lean, Six Sigma, and other quality improvement methodologies to deliver results. Job Responsibilities: Coaches and trains teams in the utilization of improvement tools and implementation of improvements. Manages plans and develops guidelines, process measures, targets, and standards for monitoring and measuring results to deliver on goals. Interacts daily with leaders, to identify, dene, and manage opportunities to improve quality while helping create a strategic approach to produce and establish extraordinary improvement. The Program Manager Quality Improvement collaborates to lead and organize eorts for continuous clinical improvement. Skills: Required Skills & Experience: Advanced training or experience in performing statistical, financial and strategic analysis Five years experience in performance/process improvement projects including but not limited to Lean, Six Sigma methodologies Demonstrated performance improvement and process improvement skills and knowledge of methodologies such as Lean, Six Sigma, DMAIC, and PDCA Highly proficient in Microsoft Project and the Microsoft Office Suite (Word, Excel, PowerPoint, Visio) Comprehensive digital marketing skills Preferred Skills & Experience: Experience managing healthcare-related projects and familiarity with healthcare provider industry Seven years experience in performance/process improvement projects preferred. Education: Required Education: Bachelors degree in Industrial Engineering, Business/Healthcare Administration, Life Sciences or equivalent Medical Foundation, Physician Practice or Health Plan related experience Preferred Education: Masters degree in Industrial Engineering, Business/Healthcare Administration, or Public Health Consulting experience OR Masters degree in Healthcare Administration or Public Health. Required Certifications & Licensure: N/A Preferred Certifications & Licensure: Certifications in Lean and/or Six Sigma Methodology Project Management Professional (PMP) certification This is the pay range that RightSourcing (a part of Magnit) reasonably expects to pay someone for this position, however, as a supplier your expected pay range may vary and/or include certain benefits like: Stipends (for clinical traveler workers only), Medical, Dental, Vision, 401K [include any compulsory benefits such as commissions, incentive bonuses, etc. if applicable]. Schedule Notes: 2 Openings for Quality Management Team - Roles are very specific - candidates must have in-depth experience in Clinical Quality Improvement in a hospital inpatient setting. Contract to Hire opportunities for the right talent. 100% Onsite *Candidates must possess all 4 of the below or they will not be considered: 1. Completed PI training and certification (six sigma, lean, CPHQ, Masters in Improvement) from nationally recognized organizations (e.g., ASQ). 2. Current or past formal position in Quality Improvement/Performance improvement (minimum 2 years) 3. History of leading and improving quality outcome metrics such as readmissions, mortality, hospital acquired conditions (infections, falls, pressure injuries, medication errors), sepsis care, venous thromboembolism, unplanned extubations, delirium, complications, c-section, exclusive breastfeeding, etc). 4. Experience using key driver diagrams, pareto charts, excel pivot tables, project management tools

Job Description Job Title: Program Manager Quality Improvement Job Type: Contract to Hire Department: Quality Management Schedule: Full Time Hourly Rate: $90- $100/hr depending on experience Required Experience: - Candidates must have in-depth experience in Clinical Quality Improvement in a hospital inpatient setting. *Candidates must possess all 4 of the below or they will not be considered: 1. Completed PI training and certification (six sigma, lean, CPHQ, Masters in Improvement) from nationally recognized organizations (e.g., ASQ). 2. Current or past formal position in Quality Improvement/Performance improvement (minimum 2 years) 3. History of leading and improving quality outcome metrics such as readmissions, mortality, hospital acquired conditions (infections, falls, pressure injuries, medication errors), sepsis care, venous thromboembolism, unplanned extubations, delirium, complications, c-section, exclusive breastfeeding, etc). 4. Experience using key driver diagrams, pareto charts, excel pivot tables, project management tools. Required Education: - Bachelor's degree in Industrial Engineering, Business/Healthcare Administration, Life Sciences or equivalent Medical Foundation, Physician Practice or Health Plan related experience Preferred Skills & Experience: -Master's degree in Industrial Engineering, Business/Healthcare Administration, or Public Health -Consulting experience Please apply online and email resume to: *************************************

Not remote Must be a USA Citizen Salary $79K to $118K plus bonus and benefits Six Sigma Certification QA Manager has managerial oversight of the Irvine site Quality Assurance organization and the Quality Assurance Department within it. The Quality Assurance responsibilities for a manufacturing plant in the aerospace and defense industry include developing, implementing, maintaining a robust quality system and measuring its effectiveness to assure that the products and processes meet internal quality standards and requirements established by customers and regulatory agencies. Our four pillars are Customer Centricity, Operational Excellence, Innovation, and People. Responsibilities: Manage a highly focused site quality organization, aligned with overall global quality expectations. Directly Manage Quality Engineers, Inspection Supervisor and inspectors. Coordinating their activities and schedules to support the Site Production and Customer needs. Ensures the products & services provided to customers meet customer requirements and regulatory standards at both the production & product evaluation level. Ensures the compliance to Quality objectives (quality costs, product defects, customers satisfaction, etc) the effectiveness of corrective measures, and compliance to AS9100 as well as MIL-STD- 790. Coordinates the fulfillment of the Inspection Procedures (Raw Material and/or Processes & Final Product) to ensure the Quality Requirements are achieved and maintained. Develops and analyzes Process Performance through metrics of First Pass Yield, First Piece Inspection as well as using APQP methods. Supports the management of business quality systems and applicable certification systems (ISO, MIL, AS, etc) including the development, maintenance & updating of documentation, processes, and records. Represent the company before regulatory agencies (DLA, NavAir), Customers, and/or Certification Registrars. Manages and participates in failure analysis, complaints, resolution & information request from customers. Supports Continuous Improvement Programs, Lean Manufacturing, Six Sigma, etc. Manage customer escapes, Notices of escapement and develop reports to track progress of investigations as well as corrective measures, while ensuring accuracy and timeliness of reporting to internal and external customers. Manage day-to-day activities of the applicable organization including: goal setting, QE activity, Inspection activity and timeliness of those activities. Develop, groom, train and manage talent by providing coaching and mentoring to build strong performing teams Works effectively in a highly cross-functional environment, balancing multiple goals and priorities. US Citizen BS degree in a technical field Strong managerial, communication and reporting skills Overall technical experience in manufacturing processes and materials used in the connector industry. 3-5 years of direct experience in a Manufacturing/Quality 5 years of management experience leading highly focused technical organizations Direct experience with APQP practices Small assembly manufacturing Proficient in Microsoft Word, Excel and PowerPoint. Experience in MS Project a plus Lean Six Sigma certification Familiarity with military, industry and aerospace standards such as Mil-STD-790, AS9100, ISO9001 and ISO17025 Experience with DLA or other Qualifying Activities as it relates to Mil qualified products Span of Control: 8 - 12 engineers and technicians

Job Overview:Quality Technician I - Los Angeles, CAThe Quality Technician is responsible for ensuring compliance with food safety, food defense, and GMP requirements through daily audits, testing, and documentation. This role supports production and quality systems by monitoring product, inventory, and processes, while effectively communicating findings to management. Shift / Schedule: This position will working 2nd shift Monday - Friday 12:00pm - 8:30pm. Flexibility and availability to work Saturdays, overtime and holidays based on business needs. Key Responsibilities:Perform GMP, food defense, and food safety audits on a daily basis. Conduct pH testing, titrations, and routine water testing to verify quality and compliance. Manage product status in SAP, including:Moving and releasing inventory. Placing products on hold. Logging and communicating hold information to management. Collect and verify production line retain samples. Perform positive release testing of products through 100% inspection or pH verification prior to release. Maintain accurate and timely documentation of audits, testing, and hold records. Create and track vendor holds when raw materials, ingredients, or packaging fail to meet specifications. Ensure compliance with company, regulatory, and customer standards. Operate independently while supporting cross-functional teams as needed. Total Rewards:Pay starting at $25. 95 per hour. Where Applicable: Benefits eligible day one!! Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements:Required:Proficiency in Microsoft Excel and Word. Strong communication and organizational skills. Ability to work independently with attention to detail. Preferred (plus):Experience with SAP for inventory management. Experience performing pH testing and titrations. Prior quality assurance, food safety, or manufacturing experience. Physical & Work RequirementsAbility to lift up to 50 lbs. Comfortable working on feet for extended periods of time in a production environment. Ability to work independently and manage multiple priorities. Company Overview: Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it!Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us?We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A. I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to kdpjobs@kdrp. com in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line.

Job Summary and Responsibilities We are offering to qualified and experienced candidates a sign-on bonus not to exceed 10% of salary for this position. We've been providing acute care services to DTLA for more than 130 years. Now, we're expanding with the opening of our new patient tower, Grand Tower, featuring a dramatically expanded Emergency Department and Family Birth Center. Thoughtfully designed with increased patient comfort and privacy. The expansion includes: * 6 trauma bays-to care for the most seriously injured patients * 47 exam rooms-to reduce wait times * Expanded patient capacity-to support more people in need and decrease ambulance diversions * Dedicated ED pediatric rooms-keeping families with young children separate from traumatically injured patients * Dedicated waiting areas for families to provide a calm, soothing environment * Convenient ER online scheduling and real-time updates from your mobile phone We are seeking a highly analytical and detail-oriented Licensed Quality Patient Safety Program Manager to join our dedicated Quality & Patient Safety team. In this pivotal role, you will be instrumental in supporting our continuous drive for excellence in patient care, especially as we launch and optimize operations within the new Grand Tower. You will leverage your expertise in data management, analysis, and reporting to identify insights, support quality initiatives, and contribute to tangible improvements in patient safety, experience, and operational effectiveness across the organization. Principal Duties and Accountabilities: * Assists in the design, planning, implementation and coordination of Quality Mgmt., Patient Safety and Performance Improvement activities for assigned hospital and medical staff departments, committees, divisions, service lines and functions. Proactively coordinates and facilitates performance improvement teams to support key initiatives, including but not limited to, activities focused on clinical quality improvement, patient safety and risk reduction, patient experience, efficiency, FMEAS, and root cause analyses and medical staff improvement (e.g. OPPE, FPPE). * Participates in an integral role to ensure compliance with CMS HIQRP/HOQRP, TJC, Leapfrog, etc., data collection and reporting of process and outcome measures. Facilitates development and implementation of data collection tools and processes including the ability to: identify data elements needed to complete appropriate measurement, perform data collection and abstraction per specifications, and validate data prior to submission or preview reports prior to publication. * Facilitates meetings, presents data and reports, identifies key findings and assists with action plans and implementation. * Maintains current knowledge of accreditation and licensing requirements and must be a resource to staff on these regulations in order to improve management of outcomes and ensure compliance. Assists with regulatory readiness and survey preparation activities including mock survey tracers. * Directors programs involving risk mitigation/management and initiatives related to providing safer care to patients. This position is responsible for providing information to various key stakeholders on the progress and status of described programs/initiatives. * Oversees the implementation of compliance policies and procedures to ensure that they meet organization's compliance requirements. Has management responsibility and accountability for the hospitals' overall compliance with regulations from The Joint Commission Department of Health Services CMS and other regulatory agencies. * Oversees the events reporting process root cause analysis and event investigation/review. Participates in system office initiatives and programs to mitigate risks identified at other hospitals resulting in reduced costs and adverse patient outcomes. * Receives and oversees responses to patient complaints and investigates to solve issues promptly. Acts as an intermediary between patients staff and family to provide clear communication between all parties regarding any outstanding issues Job Requirements * Bachelor's degree, or five (5) years of related job or industry experience in lieu of degree. * Current state license in a clinical field in state of practice. * Certified Professional in Healthcare Quality (CPHQ), or Healthcare Quality and Management Certification (HCQM), or Certificate of Professional Healthcare Quality and Patient Safety (CPQPS) within two (2) years of employment is required. * One (1) year healthcare-related quality management/performance improvement experience (e.g., chart audits, PI team member, etc.) * Three (3) years clinical experience in an acute care setting Where You'll Work Founded in 1887 Dignity Health - California Hospital Medical Center is a 392-bed acute care nonprofit hospital located in downtown Los Angeles. The hospital offers a full complement of services including a Level II trauma center the Los Angeles Center for Womens Health obstetrics and pediatric services and comprehensive cardiac and surgical services. The hospital shares a legacy of humankindness with Dignity Health one of the nations five largest health care systems. Visit **************************************************************** for more information.

About Northwood: Northwood is on a mission to transform connectivity between earth and space and bring the benefits of space to the masses through innovations in space communications technologies. If you like building quickly and seeing your work deployed in locations around the globe with real impact, we want you at Northwood. Role: We're looking for a Supplier Quality Program Manager to be Northwood's first quality-focused hire - a builder, systems thinker, and technical leader who will define how we scale manufacturing excellence across our global supply chain. You will create Northwood's supplier quality program from the ground up, partnering closely with engineering and operations to ensure our products are designed and built for long-term reliability. From designing scalable systems to defining rigorous standards, you'll establish the foundation for a world-class supplier quality organization and cultivate a company-wide culture of quality and accountability. As Northwood grows, you'll have the opportunity to build and lead a high-performing team, mentoring future engineers and shaping how high-reliability hardware moves from concept to production. You'll influence how quality scales across our global supply base and how it becomes woven into every stage of development and delivery. This is a foundational, high-impact role - perfect for someone who loves creating structure from ambiguity, leading through influence, and leaving a lasting mark on both our culture and the future of space communications. Responsibilities: Design and launch Northwood's first supplier quality management system, from process design to documentation and continuous improvement Shape the supply base: Identify, qualify, and develop world-class suppliers for RF, PCBA, mechanical, and electromechanical components Lead audits, performance reviews, and corrective actions that elevate quality and delivery across our network Partner closely with design, manufacturing, and operations on DFM, NPI, and pilot builds - ensuring every part is production-ready Define supplier KPIs (quality, cost, responsiveness) and implement real-time visibility tools that drive accountability and progress Act as the technical and quality liaison between internal engineering and external suppliers - turning insights into scalable, repeatable success Drive supplier readiness for production ramp-ups and capacity expansions as Northwood grows around the world Lead root cause analysis and corrective/preventive actions (NCR/CAPA) to eliminate defects and strengthen design for manufacturability Partner with suppliers on process improvements that cut costs, reduce cycle times, and maximize yields Establish quality requirements and flow downs that ensure every product built by our partners reflects Northwood's commitment to excellence Basic Qualifications: Bachelor's degree in Mechanical, Electrical, Industrial Engineering, or related field 7+ years in Supplier Quality, Supplier Development, or Manufacturing Quality roles Experience with quality standards and tools (e.g., ISO 9001, AS9100, PPAP) A track record of building or scaling quality systems in low-to-medium volume, high-complexity environments Proven success qualifying and managing suppliers and driving measurable performance improvement Willingness to travel up to 25% domestically and internationally to engage with our global supply network Preferred Qualifications: Background in aerospace, satellite, telecommunications, or defense industries Hands-on experience with RF, PCBA, custom enclosures, or electromechanical assemblies Familiarity with ERP, PLM, or digital quality management systems Experience supporting early-stage product development through production ramp Lean Six Sigma or similar certifications Strong data fluency - proficiency with SQL or analytics tools for supplier and quality insights

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Quality TechnicianResponsible for executing corporate and plant specific Food Safety, Quality and Laboratory requirements. The QA Technician reports to QA Manager. In the absence of the Quality Assurance Technician, the QA Manager or designate will assume the job duties. Essential Functions Ensure all parameters of food safety and quality are being adhered to and maintained throughout the facility. Assist with batching chemicals/ingredients for production. Calibrate lab and line equipment for accurate results. Collect in-process and finished product samples. Conduct standardized qualitative and quantitative testing to ensure it meets specifications. Perform aseptic testing for microbial contamination. Follow protocols for documenting testing results. Recognize deficiencies and initiate proper follow-up. Identify and isolate product that does not meet standards. Aid in troubleshooting deficiencies and non-conformances. Review food safety and quality records. Actively participate in plant teams (HACCP, Safety, etc.) Conduct other duties as assigned by management. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Must read, write and communicate in English. Must be able to work 12 hour shift (days or nights) on a rotating schedule Must follow GMP Policy - wear company issued shirt, hat, safety glasses, earplugs and hairnet in production areas. Able to lift up to 50 lbs. Able to work under pressure in a very fast paced environment Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree Certification/License: Required: N/A Preferred: HACCP Foreign Language Required: Full Professional Proficiency Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$23.52 - $31.16 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Job DescriptionSalary: Day to day life has room for improvement. That was our basic thinking when we founded simplehuman in 2000. Our mission is to bring high-performance innovation to basic but essential tasks in our daily routine. Through new technologies, meticulous engineering and an obsession for improvement, we find new and better ways to achieve basic but important daily tasks. About the role simplehuman is seeking an experienced Product Quality Engineer to drive excellence from concept through production. This is a key role in our Quality team that owns product quality planning, testing, and supplier collaboration across our new product introduction (NPI) and continuous product improvement (CPI) programs. Ideal candidate operates with analytical rigor, owns multiple workstreams simultaneously, and drives alignment through clear, influential communication while maintaining a high standard of quality and accountability. This is a fully on-site position based in our Torrance, CA office. Responsibilities Own end-to-end Product Quality Planning (PQP) process, ensuring each new/existing product has clear inspection criteria. Define and implement control requirements across all stages of manufacturing including Incoming (IQC), In-Process (IPQC), Outgoing (OQC), and Quality Audit checkpoints. Ensure mass production quality through statistical analysis and process validation, defining control limits, dimensional tolerances, and key variables that maintain cosmetic and functional consistency across builds. Design and execute pre-production validation testing to verify hardware and software performance, while designing and refining test methods, fixtures, and measurement systems for consistent, repeatable results. Partner across internal engineering, design, and external teams to align quality expectations, resolve yield issues, and report actionable quality insights to support key decisions Own failure analysis and CAPA initiatives to resolve issues, prevent recurrence, and enhance product and process robustness. Lead weekly Quality Improvement efforts and drive continuous product and process improvements with OEM partners. Own quality-critical issue management, ensuring rapid containment & effective corrective implementation. International Travel is required (up to 20%) Qualifications Bachelors degree in Mechanical, Industrial , or related Engineering field; Masters degree or higher preferred 3+ years of industry experience in quality for one or more of the following areas: product development, plastic parts, injection molding, tooling, jigs, fixtures, or high-volume manufacturing engineering (Consumer Electronics, Automotive, Medical Devices, etc.) Proven experience with high-volume manufacturing and related quality processes Solid understanding of injection molding and sheet metal fabrication Proficiency in SolidWorks, Creo, or Catia, with strong knowledge of GD&T and mechanical drawings Familiarity with quality analysis tools (8D, PFMEA, Fishbone, etc.) and Acceptance Quality Limit (AQL) standards Exceptionally detail-oriented, highly organized, and proactive in driving results Excellent written and verbal communication skills About Us Were a mature company with the soul of a start-up. We value ingenuity, precise communications, fast iteration and scrappiness. Our teams are tight-knit with a work hard, play hard tradition we take pride in individual and team success and push boundaries to make the best products. And we only build products we love to use ourselves.Great benefits, competitive compensation, and generous simplehuman product discounts.

Company: The Boeing Company Boeing Global Services, Cabin, Modifications, Maintenance (CMM) is a One Boeing opportunity to engage across the business units and global design centers. BGS CMM - Systems Engineering is seeking a high performing Extended Operations Performance Standards (ETOPS) Engineer (Mid-Level, Lead or Senior) to join this talented and fast-paced team, reporting to the BGS CMM Avionics Manager in Long Beach, California. The engineer will join and inspire a group of employees performing engineering, technical, and regulatory tasks that provide engineering solutions for multiple Boeing Global Services commercial modifications business units as well as integrating with a Boeing Commercial Airplanes (BCA) ETOPS team. The position includes responsibility for developing and executing project and process plans, as well as implementing policies and procedures. This role includes a significant level of developing and mentoring systems engineers in ETOPS design, integration and certification. The primary focus for this role is ETOPS which ensures Boeing aircraft are designed, built, tested, and supported for extended operations (especially over water), enabling Boeing customers to fly long range missions in a more direct route to/from suitable airports. ETOPS is heavily regulated and has considerable certification aspects, including focus on safety, airplane maintenance and operational procedures. This work involves close coordination with Boeing engineers and certification specialists to ensure all activities required for ETOPS certification of Boeing commercial and military commercial derivative airplanes are accomplished. As an ETOPS Engineer, you will be supporting all airplane programs on new, amended, and/or supplemental type certification and major airplane modification programs. You will be expected to coordinate, plan, prepare, review and execute ETOPS applicant certification work for submittal to the certification authorities, including the FAA, EASA, and other international validation bodies. This position will give the candidate the opportunity to develop airplane level thinking and provide exposure to multiple disciplines/areas (such as propulsion, flight controls, avionics, safety, maintenance, regulatory administration) and many levels of program leadership throughout the Boeing Company. Position responsibilities: Perform airplane-level evaluations of changes impacting ETOPS on multiple platforms (737, 747-8, 757 , 767, 777, 787) including retrofit modifications. Perform system-level evaluations and provide assistance related to ETOPS-significant systems in propulsion, systems, avionics, etc. Using project management practices, provide inputs to ETOPS certification plans and manage deliverables to closure. Prepare Major / Minor Determinations for ETOPS DAEs. Develop analytical, reliability, and empirically based ETOPS assessment reports. Review safety assessments (including Fault Tree Analysis) that pertain to ETOPS missions/diversions Develop configuration and conformity requirements for ETOPS including negotiating as required with Program, Regulatory Agencies, Suppliers, and Manufacturing/Quality. Integrate with BCA ETOPS team to support airplane program meetings and project reviews. Support customers (ETOPS) and in-service reliability tracking (ETOPS). Familiar with FAA regulations for ETOPS (e.g., 14 CFR 25.1535 & Appendix K). Able to perform Applicant role and complete training for ETOPS discipline specific and BPM 15.4 DAE role for ETOPS. Understanding of Boeing Procedures Manual Sections 15.1 and 15.4. Familiar with ETOPS Configuration, Maintenance and Procedures (CMP) document(s) and CMP change proposals and also with the ETOPS requirements for the Airplane Flight Manual (AFM) and lead on AFM change proposals. Knowledge and experience with the BPSM Process (RCA, Corrective Actions, etc.) Other skills of this role: Development of specifications, architectural and configuration concepts for associated vehicle systems to meet customer and regulatory requirements. Configuration and design of ETOPS systems and components to meet all vehicle design and performance criteria. Use of various testing, analysis, modeling, and simulation tools to estimate or calculate ETOPS system performance and demonstration of compliance to the ETOPS regulations. Development of concepts for future ETOPS systems to meet anticipated requirements. Works under minimal direction. Future Skill Development and Statement of Work Be able to document Major/Minor Determinations in Boeing Design Change Classification System (DCCS) tool and BERST as a ETOPS DAE. Basic Qualifications (Required Skills / Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. 3+ years of experience in Aerospace and Systems Engineering. Preferred Qualification (Desired Skills / Experience): 5+ years of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) 10+ years of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Experience with Airplane Extended Operations (ETOPS) certification, design, integration and analysis in systems, propulsion, electrical, etc. Knowledge of aircraft design, systems engineering, model-based engineering, system integration, requirements management, propulsion engineering, and turbomachinery. Knowledge of EASA regulations for ETOPS. Understanding and application of Project Management techniques such as scheduling, resource management, and performance measures. Experience with Systems Troubleshooting. Willing & able to travel 10% of the time domestically and internationally. Identify and trade alternatives (i.e., trade studies), select/recommend the best plan for mitigating complex risks. Experience with risk identification and mitigation plans. Implement/execute plans for mitigating risk and establish appropriate performance tracking metrics to track risk burn down over time. Ability to troubleshoot hardware, software, and anomalies, with an understanding of how to accomplish activities in a restricted configuration-controlled system environment. Ability to help develop, mentor and coach less experienced staff. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Mid-Career (Level 3): $114,750- $155,250 Senior (Level 4): $138,550- $187,450 Principal (Level 5): $165,750- $224,250 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

RxSight is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world's first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company's mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: Performs quality functions to support IS013485, FDA, CGMP, Quality System Regulations, management reporting, LAL production/QA/QC, chemistry QA/QC, product release, in-process inspection, incoming inspection, quality process improvements for LDD, manufacturing transfer, and facility support. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Read, comprehend, and follow documents related to manufacturing, inspection and quality systems for audits, compliance, and implementation. * Audit and approve production records. * Verify production process via auditing/observation and testing. * Inspect process output and product parameters against specifications. * Ensure routine compliance with process steps and proper documentation of records. * Maintain raw material lot information, monitor expiration date, and quarantine inventory when materials are expired. * Performs incoming inspection on raw materials and incoming sub-assemblies/finished goods. * Collect data for process, quality system, manufacturing quality and performance metrics and generate reports for management review. * Identify non-conformances, deviations, non-compliance, lack of calibration etc. and propose corrective actions to management. * Facilitate Manufacturing Review Board and supports non-conformance decision process. * Govern and transact materials physically and through electronic system. * Monitors laboratory and engineering equipment to ensure compliance with preventive maintenance and calibration programs. * Performs laboratory notebook audits, inventory audits, and maintains QA retains. * Take initiatives for the process improvements changes as related to manufactured components and finished products for LAL. * Responsible for assisting the Quality Assurance team with any ad hoc reports and assignments as required. * Perform incoming inspection and lot control activities of materials and parts. * Assist Quality, Manufacturing and R&D groups in running validation, verification, and developmental studies, and defining processes. * Development of inspection techniques and transfer to production and everyday use. * Monitor gowning and cleanroom logbook check per SOP to ensure all section of the cleaning log has been filled accurately and completely. * Provide Good Manufacturing Practices (GMP) and Quality Standard Operating Procedures (SOP) training to relevant department. * Create and review First Article Inspection Reports when necessary. Requirements REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. * Prior experience of working in cleanroom environment and/ or medical device manufacturing is highly preferred. * Professional, responsible, energetic, and accountable. * Excellent communication skills. * Intellectually curious and eager to learn. * Individual must be Quality oriented and possess a natural ability to pay attention to details. EDUCATION, EXPERIENCE, and TRAINING: * Associate degree (A.A.) or equivalent from a two-year college or technical school; six months to one-year related experience and/or training; or equivalent combination of education and experience. * Experience within a medical device company or regulated industry preferred. * Microsoft Word; Microsoft Excel * Training to be completed per the training plan for this position as maintained in the document control system. * The training requirements on TRN-10007 Insider Trading Policy, TRN-10008 Global Anti-Bribery and Anti-Corruption Policy and TRN-10009 Code of Business Conducts and Ethics must be diligently completed within 30 days from the hiring date and on an annual basis COMPUTER SKILLS: * Microsoft Word; Microsoft Excel; Microsoft Access; QuickBooks. Notice to Staffing Agencies and Search Firms: RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight's Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances. Salary Description $25.00 to $27.00 per hour

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

The Quality Engineer Associate supports the Quality team in achieving Summit's goal of Perfect Quality by assisting in the monitoring, documentation, and improvement of quality systems and processes. This role works closely with operations, manufacturing, and engineering teams to ensure products meet internal and customer expectations, as well as IPC standards for printed circuit boards. Ideal for a candidate beginning their career in quality engineering or manufacturing, this position offers the opportunity to develop hands-on skills in quality systems, inspection, data analysis, and continuous improvement within a high-tech manufacturing environment. The goal is to develop into a full Quality Engineer. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: In-Process Quality Support Learn and conduct in-process inspections, quality checks, and test data collection Maintain accurate documentation for quality records, logs, and forms Support the calibration system and assist with calibration tracking Help monitor process performance using basic data collection and analysis tools Participate in internal audits and prepare data or records as needed Documentation and Reporting Assist in maintaining document control procedures Support the generation of quality reports, charts, and metrics Help track nonconforming material and participate in root cause analysis Input and track Corrective Action Requests (CARs) and Supplier CARs (SCARs) Process Improvement Support Quality Engineers in continuous improvement activities Help identify opportunities for reducing defects and improving yields through performing data analysis and area assessments. Assist with implementation and monitoring of statistical process control (SPC) where needed Customer and Supplier Support Support customer quality surveys, tours, or audits as needed Assist with returned material analysis and simple failure analysis tasks Coordinate with outside test or lab services to support inspection processes 2. Goals Continuously provide assessments and work collaboratively to support improved process controls and yields. Develop measurement parameters to track progress. Work both individually and as part of a cross-functional team to support timely customer deliverables and inquiries. Education/Experience: Required: Associate's or Bachelor's degree in Engineering, Industrial Technology, or related field - or equivalent experience in a manufacturing/quality environment Basic understanding of quality principles and manufacturing processes Proficient in Microsoft Excel, Word, and PowerPoint Strong attention to detail and organizational skills Willingness to learn technical standards (e.g., IPC) and quality systems Interest in working in a hands-on capacity with tools in the laboratory and manufacturing areas, as well as, in performing data analysis. Ability to communicate clearly and work collaboratively across departments Preferred: Prior internship or experience in a quality, manufacturing, or engineering role Familiarity with inspection tools (calipers, micrometers, gauges, etc.) Exposure to ISO 9001 or similar quality management systems Understanding of SPC, basic statistics, or root cause analysis tools (5 Whys, Ishikawa) Physical Demands: Employee may lift and/or move up to 25 lbs as required to perform duties. Excellent concentration and must be able to remain focused in a dynamic fast-paced environment. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

Company DescriptionJobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Materials & Process Engineer applies their technical knowledge and expertise in structural bonding to support components across our vehicle. This role works toward building and implementing conventional and novel materials and process solutions while working with our partners to ensure delivered hardware that meets requirements that leads to the certification and production of new AAM vehicles. This position collaborates with all Engineering verticals & Supply Chain teams during the design process. This position will be required to work on-site 5 days a week. What you can do: Author material specifications and process specifications that support manufacturing & ensure quality Evaluate materials across the vehicle to satisfy design requirements Support test plan execution for composites and structural bonding, method development, materials characterization, allowable generation, and design validation Author test reports and other summaries to communicate information to the broader engineering team Participate in design reviews for hardware components/assemblies Support supplier selection, development, qualifications, and ongoing evaluations Support the manufacture of hardware both in-house and at suppliers Participate in industry working groups, standards bodies, and relevant technical conferences and symposia to maintain awareness of technology developments & regulatory trends across academia and industry May require up to 25% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in STEM or related field required Minimum three (3) years of related experience (an equivalent combination of education and experience may be considered) Experience working with technicians Experience developing a Design of Experiments plan Experience running and analyzing data from analytical materials characterization equipment Technical knowledge in one or more of the areas of: adhesives, composites, structural bonding Hands on experience with composite layup and bonding Familiarity with 3D CAD software (CATIA, SolidWorks, NX, or similar) Familiarity with statistical software, including Minitab, JMP, or similar Knowledge of CMH-17, SAE, ASTM, and other standard bodies Proficiency in writing R&D work instructions and documentation of R&D work Proficiency MS Office Suite tools such as Word, Excel, Project & Visio Understanding of a “First Principles” approach to problem solving Proactive and efficient delivery of communication and follow-up Excellent organizational skills and attention to detail Must have the ability to independently prioritize and accomplish work in a timely manner You may also be able to contribute: Six Sigma Green Belt or higher preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is:$133,120-$186,160 USD Click HERE or visit: *********************************** to view our benefits!

5th Axis is the world leader in automated production, manufacturing, and machining. We are a turn-key solution provider with a focus on product development, milling, turning, assembly, plating, Are you a creative thinker who loves turning ideas into reality? Ready to tackle exciting challenges and design the future? Join our team of forward-thinkers and shape groundbreaking solutions in an environment that rewards your expertise and passion! Are you a creative thinker who loves turning ideas into reality? Ready to tackle exciting challenges and design the future? Join our team of forward-thinkers and shape groundbreaking solutions in an environment that rewards your expertise and passion! As an Automation Maintenance and Quality Technician, you will play a crucial role in ensuring the efficient operation of our automation systems, maintaining high-quality production standards, and contributing to the overall success of our manufacturing processes. What You Will Do: Perform routine maintenance tasks on CNC machines and automation systems. Clean and maintain the robot, including emptying chips, cleaning, and replacing coolant as needed. Ensure that all equipment is in proper working condition for continuous production. Monitor production processes and make necessary adjustments to maintain efficiency and quality. Perform routine quality checks to ensure parts are within tolerance. Inspect finished parts using micrometers, calipers, and other precision measuring tools. Compare finished parts to blueprints to ensure they meet specified standards. Document and report any deviations or quality issues. Unload and reload materials in the robot to facilitate continuous production. Safely handle and transport materials as required. Maintain detailed records of maintenance activities, production data, and quality control checks. Report any equipment malfunctions, maintenance needs, or quality concerns to the supervisor. Assist with material management as needed Adherence to safety protocols and practices Perform other duties as assigned. Do you have: High school diploma or equivalent; technical certification or degree in a related field is a plus. Proven experience operating CNC machines for at least 2 years. Proficiency in using micrometers, calipers, and other precision measuring tools. Strong blueprint reading skills and the ability to interpret technical drawings. Attention to detail and a commitment to maintaining high-quality standards. Knowledge of robotics and automation technology is advantageous. Excellent problem-solving and troubleshooting skills. Strong communication skills and the ability to work effectively within a team. Basic computer skills for data entry and equipment control. Adherence to safety protocols and practices. Able to use proper tools such as calipers, gauge, pins and micrometers. Knowledgeable using test indicators. Ability to understand setup sheets. Basic knowledge of programs. Basic knowledge of G&M codes. Basic tooling knowledge. Ability to maintain a safe and clean working environment while adhering to company policies, quality policies, and industry standards. Detail oriented, organized, and able to demonstrate a high sense of urgency. What We Offer: Training and room to grow We pay 100% of our employees' costs toward medical, and dental. Company sponsored life and disability Insurance 401K with up to 4% matching Paid holidays Generous Paid Time Off accrual Pleasant non-corporate environment Fun team bonding events Are You Ready to Join Us? Hyper-growth means hyper opportunities for everyone on our team! At our company, we believe in growing talent from within, providing clear paths for advancement across all roles. Over 90% of our managers and countless others in key positions were promoted internally. If you're ready to grow with us, join our team and discover where your potential can lead! 5th Axis believes that everyone can make an impact, and we are proud to be an equal opportunity employer committed to providing employment opportunity regardless of sex, race, creed, color, gender, religion, marital status, domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition, sexual orientation, pregnancy, military or veteran status, citizenship status, and genetic information. If you require an accommodation to complete the application or the interview process, please contact *******************

" The Enterprise Quality Control Processor (EQCP) performs standardized quality control review on key services, processes, and functions to ensure compliance with LERETA's requirements and customer Service Level Agreements (SLA). The position provides timely and accurate quality control reviews and reports to the tax teams, division management, and customers. Quality Control * Tracks and ensures that portions of each department's processes are reviewed by auditors in a timely manner in accordance with LERETA's requirements as well as the customer's quality requirements * Processes include various tasks such as: disbursements, refunds / returned checks, mismatched tax line / temporary tax lines, miscellaneous exceptions, parcel searches and lien tax line data which are also processed by all teams * Applies the appropriate procedures to ensure compliance with departmental and customer contractual requirements * Facilitates timely exchange of information, accurately prepares and distributes reports to appropriate management / departments * Communicates status of assignments and makes recommendations for improving the department's performance to the appropriate supervisor or manager This position will perform other duties as assigned based on the needs of the department. Required Education & Experience * High School Diploma or Equivalent * Basic Microsoft Office Access, Excel, Outlook, PowerPoint and Word skills * Type 35+ wpm * Ability to operate 10-key by touch with accuracy * Minimum of 2-years' experience working with tax service, outsourcing / central services and/or loan servicing, specifically relating to real estate tax processing * Hands-on experience with auditing and/or quality control processes * Advanced experience with processing bills, tasks, manual disbursements, returned/refund checks, miscellaneous exceptions and searching of parcels and lien information Salary Range: $16.96 - $20.00 "

Job Description Responsible for establishing and continuing eective quality improvement eorts to achieve organizational performance goals and national top decile performance in clinical excellence. Quality improvements may be small or large scale and are in alignment with s strategic goals for example, addressing 30-day readmissions and mortality reduction. The Quality Improvement Manager may apply Lean, Six Sigma, and other quality improvement methodologies to deliver results. Job Responsibilities: Coaches and trains teams in the utilization of improvement tools and implementation of improvements. Manages plans and develops guidelines, process measures, targets, and standards for monitoring and measuring results to deliver on goals. Interacts daily with leaders, to identify, dene, and manage opportunities to improve quality while helping create a strategic approach to produce and establish extraordinary improvement. The Program Manager Quality Improvement collaborates to lead and organize eorts for continuous clinical improvement. Skills: Required Skills & Experience: Advanced training or experience in performing statistical, financial and strategic analysis Five years experience in performance/process improvement projects including but not limited to Lean, Six Sigma methodologies Demonstrated performance improvement and process improvement skills and knowledge of methodologies such as Lean, Six Sigma, DMAIC, and PDCA Highly proficient in Microsoft Project and the Microsoft Office Suite (Word, Excel, PowerPoint, Visio) Comprehensive digital marketing skills Preferred Skills & Experience: Experience managing healthcare-related projects and familiarity with healthcare provider industry Seven years experience in performance/process improvement projects preferred. Education: Required Education: Bachelors degree in Industrial Engineering, Business/Healthcare Administration, Life Sciences or equivalent Medical Foundation, Physician Practice or Health Plan related experience Preferred Education: Masters degree in Industrial Engineering, Business/Healthcare Administration, or Public Health Consulting experience OR Masters degree in Healthcare Administration or Public Health. This is the pay range that RightSourcing (a part of Magnit) reasonably expects to pay someone for this position, however, as a supplier your expected pay range may vary and/or include certain benefits like: Stipends (for clinical traveler workers only), Medical, Dental, Vision, 401K [include any compulsory benefits such as commissions, incentive bonuses, etc. if applicable]. Required Education: Bachelors degree in Industrial Engineering, Business/Healthcare Administration, Life Sciences or equivalent Medical Foundation, Physician Practice or Health Plan related experience Schedule Notes: 2 Openings for Quality Management Team - Roles are very specific - candidates must have in-depth experience in Clinical Quality Improvement in a hospital inpatient setting. Contract to Hire opportunities for the right talent. 100% Onsite *Candidates must possess all 4 of the below or they will not be considered: 1. Completed PI training and certification (six sigma, lean, CPHQ, Masters in Improvement) from nationally recognized organizations (e.g., ASQ). 2. Current or past formal position in Quality Improvement/Performance improvement (minimum 2 years) 3. History of leading and improving quality outcome metrics such as readmissions, mortality, hospital acquired conditions (infections, falls, pressure injuries, medication errors), sepsis care, venous thromboembolism, unplanned extubations, delirium, complications, c-section, exclusive breastfeeding, etc). 4. Experience using key driver diagrams, pareto charts, excel pivot tables, project management tools.