Quality engineer jobs in Fairfield, CT - 282 jobs

The Quality Registered Nurse plays a vital role in advancing the hospital ' s journey toward the ANCC Pathway to Excellence designation. This position supports the development of a positive practice environment by leading quality improvement initiatives, promoting nursing excellence, and ensuring alignment with the six Pathway Standards: Shared Decision-Making, Leadership, Safety, Quality, Well-Being, and Professional Development. Lead and coordinate quality improvement projects that align with Pathway standards, focusing on patient safety, clinical outcomes, and nursing practice. Support shared governance structures by facilitating nurse-led councils and promoting frontline nurse involvement in decision-making. Monitor and report on nursing-sensitive indicators, including infection rates, falls, medication errors, and readmissions. Conduct audits and root cause analyses to identify opportunities for improvement and ensure compliance with evidence-based practices. Collaborate with nursing leadership to develop and implement strategies that foster a respectful, safe, and empowering work environment. Educate staff on Pathway standards, quality initiatives, and professional development opportunities. Assist in preparing documentation for the Pathway application, including narratives, outcome data, and survey coordination. Promote nurse well-being by supporting initiatives that address physical and mental health, recognition, and work-life balance. How This Role Supports Pathway to Excellence: The Pathway to Excellence designation requires hospitals to demonstrate excellence across six standards: [********************* Shared Decision-Making - Quality Nurses help facilitate nurse-led councils and shared governance. Leadership - They collaborate with nurse leaders to promote transparency, accountability, and mentorship. Safety - They lead initiatives to reduce harm and foster a respectful workplace. Quality - They monitor outcomes and drive continuous improvement. Well-Being - They support programs that promote nurse wellness and recognition. Professional Development - They help create learning opportunities and career advancement pathways. Requirements Bachelor's degree in Nursing (BSN) required, Master's preferred Minimum of 3-5 years of clinical experience in a hospital setting. Experience in quality improvement, patient safety, or nursing excellence programs preferred. Familiarity with ANCC Pathway to Excellence standards and survey process. Strong analytical, communication, and project management skills. Proficiency in data analysis tools and electronic health records. Registered Nurse (RN) with active New York State licensure.

We are seeking a highly motivated Process Engineer to lead and support our assembly operations with a strong focus on process optimization, automation, and Lean manufacturing. The ideal candidate will play a critical role in driving operational excellence, improving assembly line performance, and leading continuous improvement initiatives to enhance safety, quality, delivery, and cost. Responsibilities Develop and optimize assembly processes, ensuring alignment with quality, productivity, and cost targets. Identify and implement automation opportunities (robotics, vision systems, material handling, etc.) to increase efficiency and reduce manual labor. Collaborate with cross-functional teams including design, quality, maintenance, and operations to launch new products and processes into production. Facilitate continuous improvement initiatives using Lean tools such as Kaizen, 5S, Standard Work, SMED, Value Stream Mapping, and Root Cause Analysis. Analyze and resolve process issues through structured problem-solving (e.g., DMAIC, 8D, PDCA). Develop and maintain process documentation, including work instructions, process flow diagrams, PFMEAs, and control plans. Monitor KPIs such as cycle time, OEE, scrap, and downtime; identify trends and take corrective actions. Champion Lean culture within the organization by training, mentoring, and engaging team members at all levels. Evaluate new equipment and technologies; develop business cases and support capital projects from concept through implementation. Ensure compliance with safety, quality, and environmental standards in all process engineering activities. Qualifications Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering or related field. 2+ years of experience in process or manufacturing engineering, preferably in a high-volume assembly environment. Knowledge of assembly tooling, fixtures, and workstations. Proficiency in using engineering tools such as AutoCAD/SolidWorks, Excel (advanced), and statistical analysis software (e.g., Minitab).

Superior Motion Controls designs, produces and delivers precision components and assemblies for defense and aerospace systems. We are seeking a highly experienced and hands-on Process and Quality Manager to oversee all aspects of our Quality Program including design and development, precision machining, assembly and test of electromechanical assemblies. This role is responsible for supervising and scheduling internal inspection personnel and interfacing with engineering and production management to ensure all work products (WIP and final components) meet requirements. The Process and Quality Manager will serve as the principal adviser to executive management on elements of the company's Quality Management System and directly lead the company's efforts to maintain all required certifications with respect to external standards (ISO9001:2015, AS9100, etc.). Key Responsibilities ▪ Oversee all aspects of the company's Quality Program and the Inspection Department. ▪ Supervise and schedule the activities of all company quality inspectors ▪ Recruit and train Quality Inspectors to ensure adequate staffing to meet demand ▪ Achieve and maintain proficiency as a Quality Inspector ▪ Ensure all inspection tools and systems are calibrated on schedule as required and maintain appropriate documentation. ▪ Lead the Company through all required external quality audits (Standards based such as ISO 9001, AS9100 as well as any customer required) Requirements Qualifications ▪ Minimum 10 years experience in quality control, with at least 5 years in a leadership or management capacity; preferably in a precision machining/manufacturing environment ▪ Ability to read and interpret complex engineering drawings and GD&T ▪ Strong skills in coaching and developing inspectors with a range of experience levels ▪ Familiarity with lean manufacturing principles, ERP systems, and performance metrics ▪ Effective communicator with strong collaboration skills across departments

Dependable. Enthusiastic. Driven to succeed. Bring your manufacturing skills to a role that has direct impact on delivering cutting edge technology to our global customer base. Family-owned for over 75 years, Precision Resource is a leading global supplier of precision metal components and assemblies using a fineblank production method. We provide solutions to quality, cost and production challenges for market-leading customers in industries such as automotive, heavy duty, medical, electronics, cutlery and defense. Precision Resource offers: Benefits package including health, dental, life and vision insurance 401(k) with match and profit sharing Annual bonus based on division profitability Vacation and flexible paid holidays Wellness and Employee Assistance Programs Tuition reimbursement and paid training Work with an established team of long-term employees Our Connecticut division, located in Shelton, seeks a Quality Manager. Summary The Quality Manager has overall responsibility for managing the Quality department in order to establish advanced quality and reliability engineering to enhance product quality, reliability and acceptance. Essential Duties and Responsibilities Set, direct & support priorities of the Quality team (development of accountabilities for each team member) Review/re-set objectives in conjunction with on-time performance evaluations Develop, implement and improve departmental metrics Drive continual improvement process within the Quality department Develop a continuous learning process for all staff (proper measurement techniques, identifications fit/function - critical characteristics, standardization of acceptance criteria) Ensure NCR's (Nonconformance Reporting), inspection, SPC, Gauge Maintenance, Cost of Quality, internal audits, etc. are accurate and completed in a timely manner Lead/support problem resolution and responsiveness of all customer quality related issues Customer liaison Attend supplier conferences Review all 8D reports and corrective actions implemented Actively participate in APQP, FMEA and quote review meetings Ensure Division maintains IATF 16949 certification Improve and maintain accurate Quality procedures and manuals Qualifications, Education, Experience BS in Engineering or highly technical training equal to a 4-year program or 4-10 years of manufacturing experience in the metal working industry 5- 10 years of supervisory experience within a manufacturing environment Experience with formal documentation systems and methods particularly ISO9001 and IATF 16949 Experience in the automotive industry preferred. Precision Resource is an equal opportunity employer, M/F/D/V. To learn more, visit **********************************

For description, visit PDF: *********** amazonaws. com/zcom-media/sites/a0i0L00000VJ0SJQA1/media/mediamanager/Quality_Technician_2025. pdf

Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Job Description Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Job Description Required Qualifications: High School Diploma or equivalent - Required Quality Inspection Experience (2 to 4 years) Strongly Preferred High attention to detail and consistency Experience with basic measuring equipment such as calipers or micrometers and other common inspection tools Experience reading and interpreting blueprints and specifications Experience in a smaller production environment Some experience with Visual Measuring Systems desired Responsibilities: Scope: Our Quality Inspectors compare measurements, form, fit, function, and value judgments of simple and complex parts to blueprint specifications and general workmanship standards using documents, experience, and knowledge of inspection techniques of Saint-Gobain/American Seal & Engineering Co. The Quality Inspector is responsible for ensuring Good Documentation Practices are utilized throughout all quality records that are reviewed/completed/inspected/audited. Essential Functions: Inspect manufactured product for dimensional consistency, workmanship and finish. Maintains the flow of product through inspection in a timely manner meeting due dates for outside processes and customer deliveries. Inspects incoming materials for conformance to requirements, reviews certifications for conformance, issues DMR or NCMR in our ERP system if needed. Performs In-process inspection. Reviews certification packages for product and releases for shipment in ERP system. Files electronic data on server and maintains accurate and orderly certification files in QA. Assists the lead Inspector and department manager as needed. Other tasks as assigned. Comments/Special Instructions: Ideal candidate will have previous experience in a fast-paced manufacturing environment.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Reports to the Process Engineering Manager: This position's primary focus is to provide process engineering support and optimization assistance for MPLX's facilities including supporting operations in troubleshooting, process modeling, and PHAs. This person will collaborate with business development, engineering, operations, and the capital projects groups to develop, evaluate, and advance projects. All work will be performed in compliance with company standards, procedures, and government requirements. This position belongs to a family of jobs with increasing responsibility, competency, and skill level. The actual position title and pay grade will be based on the selected candidate's experience and qualifications. KEY RESPONSIBILITIES: * Work closely with Operations and Business Development to troubleshoot process related bottlenecks. * Provide process support for facility startups and shutdowns. (Planned and Unplanned) * Generate monthly KPI (Key Process Indicators) reports for facilities. * Provide process support for PHAs and LOPAs of facilities. * Assist Operations in the development and review of CPVs, SOLs, and Operating Procedures. * Provide process engineering support for root cause failure analysis of equipment, instrumentation, and process controls. * Participates in the development and review of new G&P standards including engineering, operations, PSM, environmental, and health and safety. * Must be able to handle assignments and projects with minimal supervision and complete within acceptable time standards. * Travel expected up to 33% based on location. Other MPLX locations may be considered. EDUCATION AND EXPERIENCE: REQUIRED: * Bachelor's Degree in Engineering from an accredited College or University * Minimum of 3 years of Process Engineering experience * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Valid Driver's License * Must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. PREFERRED: * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Chemical Engineering degree * PE License * Broad process knowledge of compressor stations, natural gas cryogenic processing facilities, and light end fractionation processes. * 7+ years in the oil & gas, chemical, pharmaceutical, or manufacturing industry SKILLS: Must have excellent verbal and written communication skills to effectively communicate with all levels of individuals/employees. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Midland, Texas Job Requisition ID: 00020052 Pay Min/Max: $104,300.00 - $179,800.00 Salary Grade: 11 - 12 Location Address: 600 N Marienfeld St Ste 450 Box 140 Additional locations: Bridgeport, West Virginia, Cadiz, Ohio, Canonsburg, Pennsylvania, Carlsbad, New Mexico, Denver, Colorado Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

**Country:** United States of America , Medford, NY, 11763 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. **What You Will Do:** + Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits). + Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s). + Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives. + Support generation of FAI and corresponding documentation. + Review incoming FAI to ensure compliance to Collins and AS9102 standards. + Any other function(s) as assigned by management. **Qualifications You Must Have:** + Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience. + Experience in a quality environment within the aerospace or defense industry. **Qualifications We Prefer:** + AS9102 experience + Good communications skills and the ability to work within a team. Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. **What We Offer:** Some of our competitive benefits package includes: + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! Learn More & Apply Now! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. Apply now and be part of the team that's redefining aerospace, every day. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 44,000 USD - 78,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. What You Will Do: Perform visual and dimensional inspection on components and ensure conformance against the technical data (Product Verification Audits). Responsible for receiving inspection, in-process and final inspection of repairable parts/components channeled into the cell(s). Support and participate in EH&S, Quality, Ethics and continuous improvement projects and initiatives. Support generation of FAI and corresponding documentation. Review incoming FAI to ensure compliance to Collins and AS9102 standards. Any other function(s) as assigned by management. Qualifications You Must Have: Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience. Experience in a quality environment within the aerospace or defense industry. Qualifications We Prefer: AS9102 experience Good communications skills and the ability to work within a team. Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. What We Offer: Some of our competitive benefits package includes: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Learn More & Apply Now! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 44,000 USD - 78,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Full-time Description North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: As the NPI SMT Process Engineer, you lead the development, optimization, and transition of new PCBAs into manufacturing within a high-mix, low-volume electronics environment at North Atlantic Industries. With a minimum of five years of experience, you serve as a technical liaison between Engineering and Production, ensuring scalable, high-reliability SMT processes that support advanced defense, aerospace, and industrial electronics. Requirements Lead New Product Introduction (NPI) activities for SMT-based electronic assemblies in a high-mix, low-volume manufacturing environment, from prototype builds through full-rate production. Serve as the primary technical liaison between Design Engineering and Production, ensuring clear communication and alignment throughout the NPI lifecycle. Develop, validate, and document robust SMT manufacturing processes including solder paste printing, pick-and-place, reflow, and automated inspection (AOI/X-ray). Work with Design Engineering to drive Design for Manufacturability (DFM) and Design for Test (DFT) reviews to ensure efficient and cost-effective manufacturing. Define and recommend tooling, fixtures, and equipment requirements to support complex SMT and mixed-technology PCB assemblies. Run NPI manufacturing line on pilot, and low-volume production builds, resolving issues and optimizing the process before handing off to Production. Work with Quality and Process Engineering to drive improvements to improve yield and product reliability. Make technical recommendations on the procurement of new SMT equipment and technologies to keep pace with new design requirements & industry advancements. Ensure compliance with IPC standards, internal quality systems, and applicable customer and regulatory requirements. Candidates must be a U.S. Person, defined as either a U.S. citizen or a lawful permanent resident (Green Card holder), and must be able to provide appropriate documentation upon hire to verify this status. Please note that some positions involve sensitive customer contracts and require U.S. citizenship as a condition of employment. Qualifications and Education Requirements: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, or a related technical discipline. Minimum of 5 years of hands-on experience supporting SMT and PCBA manufacturing. Demonstrated experience working in a high-mix, low-volume electronics manufacturing setting. Proven experience supporting NPI SMT builds and transitioning high-reliability electronic products into production. Solid understanding of PCB fabrication, component packaging, and electronic assembly processes. Demonstrated ability to work as a collaborative team player across Engineering, Manufacturing, and Operations. Working knowledge of IPC standards such as IPC-A-600, IPC-A-610, IPC-J-STD-001, and IPC-7351. Preferred Skills and Abilities: Experience operating and programming Mycronic pick-and-place equipment in a production or NPI environment. Familiarity with solder paste jet printing technologies and process development. Selective Solder programming experience Experience with Allegro PCB Design software Working Environment: This role is based in a high-mix, low-to-medium volume electronics manufacturing environment and will require time on the production floor supporting SMT lines, prototype builds, and troubleshooting activities. North Atlantic Industries is an equal opportunity employer committed to delivering high-reliability electronic systems through engineering excellence and disciplined manufacturing processes. North Atlantic Industries offer comprehensive and competitive packages including: Medical, Dental, and Vision Insurance Company-provided Life and AD&D Insurance Voluntary Supplemental Life Insurance Long-term Disability Insurance Flexible Spending Accounts (FSA) Employee Assistance Program (EAP) Tax-deferred 401K with company matching contributions Vacation, holidays, sick Employee tuition reimbursement Business casual dress environment Schedule: M-F Day Shift North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $100,000 - $150,000 per year

Job Title: Quality Technician III Salary: $ Depending on experience Hours: 7:00 AM - 3:30 PM Duration: Direct Hire and Special DutiesThis position requires a minimum of 7 years of advanced inspection experience, including detailed layouts, setups, and visual inspections. Responsibilities include performing inspections for receiving, first article, first piece, in-process, final, and non-routine inspection activities on components (e.g., parts, sub-assemblies, finished goods, tooling, gages, fixtures, etc.). Additional duties may be assigned as required.Compensation & Benefits Competitive pay Medical, dental, and vision insurance Paid vacation Excusable allowance hours 401(k) retirement plan Education & Experience Requirements High school diploma or technical school equivalent with emphasis in mathematics ASQ CQT certification preferred Calibration experience preferred Experience inspecting high-precision, tight-tolerance parts in industries such as: Aerospace (ISO 9001/AS9100) Automotive (IATF 16949) Medical Device (ISO 13485) Military/Government Familiarity with both low- and high-volume production environments Compliance & Citizenship Requirements Must be a U.S. Citizen or U.S. Permanent Resident Green Card holder (ITAR compliance required) Skills & ResponsibilitiesCandidates must demonstrate proficiency in the following areas: Blueprint reading and GD&T interpretation (e.g., true position, profile of a line/surface) Interpretation of customer blueprints, material specs, and MIL-SPECs Understanding of the PPAP process Programming and operation of Vision Systems and CMMs (Starrett preferred) Proficient use of inspection tools including: Micrometers, calipers, indicators, comparators, gage pins Hardness testers, concentricity gages Surface plate setups using height gages, sine plates, v-blocks, etc. Development of inspection instructions and method setup sheets Maintenance of quality records and documentation Mentoring of Level I and II Inspectors Anticipating inspection needs, taking initiative, and escalating issues appropriately Communicating inspection deviations and generating nonconformance reports Supporting lean initiatives and continuous improvement efforts Maintaining safety, environmental, housekeeping, and documentation standards Company OverviewFounded in 2010, Top Prospect Group focuses on matching high-quality candidates with top clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology and professional services. Qualified candidates are encouraged to apply immediately! Please include a clean copy of your resume, salary expectations, and any references in your application. #INDTPGSHELTON

Bexorg is pioneering a transformative approach to CNS drug discovery through our cutting-edge BrainEx platform. We maintain and study molecularly active brains in a controlled environment, leveraging advanced organ devices that combine hardware, software, and fluidic systems. As we scale, we are looking for a Senior Bioprocess Engineer to lead the optimization of these organ devices and support our mission to accelerate discoveries in neurobiology. The Role The Senior Bioprocess Engineer will play a key role in the development, optimization, and continuous improvement of Bexorg's organ device systems. This role requires expertise in managing bioreactor-type systems, with a focus on fluidic processes, environmental control, and software integration. The ideal candidate will have experience in process development, automation, and cross-functional collaboration to support robust, reproducible experimentation. Key Responsibilities System Optimization Lead the optimization of Bexorg's organ device processes, focusing on parameters such as temperature, pH, oxygen, nutrient flow, and waste removal. Develop and implement standard operating procedures (SOPs) for consistent, reproducible operation of the devices. Process Development Design and run experiments to improve device performance, aiming for efficiency and scalability. Work with scientists and engineers to identify bottlenecks and innovate new solutions. Automation and Control Configure and manage automated control systems to ensure stable and consistent device performance. Collaborate with software engineers to integrate data acquisition and control software for real-time monitoring and troubleshooting. Data Monitoring and Analysis Develop and oversee a data monitoring system to capture performance metrics, identify trends, and facilitate continuous improvements. Work with data scientists to analyze and interpret data for process optimization. Cross-functional Collaboration Collaborate with research, engineering, and data science teams to align process development with scientific objectives. Serve as a liaison to troubleshoot and resolve technical issues that impact experimentation. Qualifications Education: Master's or PhD in Bioprocess Engineering, Bioengineering, Chemical Engineering, or a related field. Experience: 5+ years of experience in bioprocessing, bioreactor optimization, or similar fields, ideally in the biotech or pharma industry. Technical Skills: • Proficiency in managing fluidic and environmental control systems. • Experience with process automation and software-driven control systems. • Familiarity with data analysis for process monitoring. Soft Skills: Excellent problem-solving skills, strong communication abilities, and a collaborative approach to working in cross-functional teams. Benefits Competitive salary and benefits package. Opportunity to contribute to pioneering advancements in CNS drug discovery. Work in a collaborative, innovative environment with a team of leading scientists and engineers.

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to learn and subsequently operate all test equipment within the Laboratory Department Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent 1 year of manufacturing or quality experience is a plus but not required Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Working knowledge of measurement instruments: i.e., calipers, etc. Basic proficiency of Microsoft Excel and Word Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements Must demonstrate acceptable vision requirement.

Are you looking for a new challenge? Passionate about innovation? Want to work for a global company that values integrity, teamwork, and loyalty? At LATICRETE International, we aim to be the leading construction brand trusted globally for high-performance tile and stone installation systems and building finishing solutions. We've been in business for over 65 years, family-owned for three generations, and can be found in over 100 countries. The Hartford Business Journal even named us one of Connecticut's top family-owned companies in 2017! We don't just make innovative, industry-leading products. Our purpose is to improve the built world and the lives of those who build it. We strive to connect with, engage with and improve the lives of our employees, our customers, our partners, and the global communities in which we operate. We are seeking passionate and ambitious employees who want to make a difference not just within our organization, but within their communities, our industry, and the world. If that sounds like you, then what are you waiting for? Join the family and expand your horizons! Just some of our benefits: Medical Dental Vision 401k Tuition reimbursement 13 paid holidays in addition to paid vacation and sick time Flexible spending Life Insurance, AD&D and Supplemental Insurance POSITION SUMMARY Applying engineering and chemistry techniques in the improvement of quality and manufacturing processes and products and in the transition of new products and processes from R&D to production. Assist in equipment and processes design to ensure efficiency, cost-effectiveness, and to promote safety, quality and reliability. Assess current equipment methods and processes and makes recommendations for changes. Troubleshoot and repair equipment and processes. Shows results in reports. Applies themselves in laboratory setting as needed follows good GMP. May train personnel in equipment and method usage and processes. Performs work under minimal supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES Additional duties and responsibilities may be assigned, as necessary. Process Lab and New Product Development Support (50%) Assist NPD projects as assigned and in compliance with Procedures, Programs, and Policies. Assist with developing and executing Design of Experiments for pilot plant scale-up and production scale-up. Analyze Design of Experiment data identifying results compared to expectations and opportunities for improvement. Data Analysis / Technical Management (20%) Analyze product/process data identifying opportunities for improvement and cost reduction. Analyze product/process/quality data identifying opportunities for improvement and cost reduction. Analyze the production requirements of products and ensure JDE1 data are correct. Ensure all operations and processes comply with ISO/QMS requirements. Develop work instructions and provide training on new and improved equipment and processes. Plant Support (20%): Assist in identifying, developing and implementing process improvement initiatives which reduce waste and non-value-added activities. Plan, develop and implement quality and manufacturing process changes that yield improved Overall Equipment Effectiveness (OEE); production efficiencies, yields and rates. Provide support on any production/product/quality issues as required. Evaluate equipment and process capabilities and make recommendations on equipment design and selection. Lead/direct the installation and start-up of new processes and equipment. Develop a rapport with multiple Plant Leadership Teams, QA Team, and R&D personnel. Coordinate QA efforts with R&D and vice versa. Pilot Plant Support (10%) Operates and ensures pilot plant machines/production equipment is prepared for operation and installed following protocols and procedures and performs regular technical testing to ensure their safety and efficiency and ensures are functioning to specifications. Executes required lab testing for experiments completed in the pilot plant. REQUIRED SKILLS & QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: Bachelor's degree in Chemical Engineering, Industrial Engineering, or Mechanical Engineering from an accredited university Specialized Skills and Experience: Minimum of 3 - 6 years' experience in a process manufacturing environment. Self-starter, able to work alone with limited supervision. Handles up to low/intermediate complex issues and problems and refers only the most difficult and complex issues to higher-level staff. Assists other team members on up low complex issues. Analytical thinking and problem solving skills. Excellent communication (oral and written) and interpersonal skills. Highly organized in scheduling, executing responsibilities and prioritizing in a multitask environment. Self-starter, able to work alone with limited supervision. Team player - maintain a positive, cooperative attitude with all employees of LATICRETE and all customers. Leadership skills. Computer skills: Advanced knowledge of Microsoft Office (Word, Excel, PowerPoint) and Outlook. Mini-Tab or other similar software. Travel Requirement: Up to 50% (domestic and international). Must have or be able to obtain a passport. Physical Requirements: Lift: Must be able to lift and/or carry a minimum of 50 pounds. Push/Pull: Must be able to push/pull 25 pounds. Standing: Must be able to stand at least 50-75% of the day. Sitting: Must be able to sit 25-50% of the day. Twisting/Bending: Must be able to Twist/bend 50-75% of the day. Squatting, Climbing and/or Crawling: Must be able to squat/climb/crawl 20% of the day.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. **Job Description** Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: **Manufacturing Engineering Internship:** In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: + Learn and understand state-of-the-art methods of manufacturing, + Support manufacturing and repair processes for component hardware and/or overall engine assembly, + Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls + Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives + Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment + Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: + Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding + Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) + Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations + Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: + Aeronautical/Aerospace Engineering + Ceramic Engineering + Chemical Engineering + Civil Engineering + Computer Engineering + Computer Science + Electrical Engineering / Electrical & Computer Engineering + Engineering Technology (various) + Fiber/Polymer Science + Industrial Engineering + Manufacturing Engineering + Materials Science/Engineering + Mechanical Engineering + Systems Engineering + Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with honesty, contributes constructively + Focused: quick learner, strategically prioritizes work, committed, and takes initiative + Leadership ability: strong communicator, decision-maker, collaborative teamwork + Problem solver: analytical-minded, challenges existing processes, critical thinker + Comfortable working in a fast-paced shop floor environment around various machine tools and equipment + Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering + Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: _GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an_ Equal Opportunity Employer (******************************************************************************************************************************************************** _._ _Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._ _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description Superior Motion Controls designs, produces and delivers precision components and assemblies for defense and aerospace systems. We are seeking a highly experienced and hands-on Process and Quality Manager to oversee all aspects of our Quality Program including design and development, precision machining, assembly and test of electromechanical assemblies. This role is responsible for supervising and scheduling internal inspection personnel and interfacing with engineering and production management to ensure all work products (WIP and final components) meet requirements. The Process and Quality Manager will serve as the principal adviser to executive management on elements of the company's Quality Management System and directly lead the company's efforts to maintain all required certifications with respect to external standards (ISO9001:2015, AS9100, etc.). Key Responsibilities ▪ Oversee all aspects of the company's Quality Program and the Inspection Department. ▪ Supervise and schedule the activities of all company quality inspectors ▪ Recruit and train Quality Inspectors to ensure adequate staffing to meet demand ▪ Achieve and maintain proficiency as a Quality Inspector ▪ Ensure all inspection tools and systems are calibrated on schedule as required and maintain appropriate documentation. ▪ Lead the Company through all required external quality audits (Standards based such as ISO 9001, AS9100 as well as any customer required) Requirements Qualifications ▪ Minimum 10 years experience in quality control, with at least 5 years in a leadership or management capacity; preferably in a precision machining/manufacturing environment ▪ Ability to read and interpret complex engineering drawings and GD&T ▪ Strong skills in coaching and developing inspectors with a range of experience levels ▪ Familiarity with lean manufacturing principles, ERP systems, and performance metrics ▪ Effective communicator with strong collaboration skills across departments

Job Description Dependable. Enthusiastic. Driven to succeed. Bring your manufacturing skills to a role that has direct impact on delivering cutting edge technology to our global customer base. Family-owned for over 75 years, Precision Resource is a leading global supplier of precision metal components and assemblies using a fineblank production method. We provide solutions to quality, cost and production challenges for market-leading customers in industries such as automotive, heavy duty, medical, electronics, cutlery and defense. Precision Resource offers: Benefits package including health, dental, life and vision insurance 401(k) with match and profit sharing Annual bonus based on division profitability Vacation and flexible paid holidays Wellness and Employee Assistance Programs Tuition reimbursement and paid training Work with an established team of long-term employees Our Connecticut division, located in Shelton, seeks a Quality Manager. Summary The Quality Manager has overall responsibility for managing the Quality department in order to establish advanced quality and reliability engineering to enhance product quality, reliability and acceptance. Essential Duties and Responsibilities Set, direct & support priorities of the Quality team (development of accountabilities for each team member) Review/re-set objectives in conjunction with on-time performance evaluations Develop, implement and improve departmental metrics Drive continual improvement process within the Quality department Develop a continuous learning process for all staff (proper measurement techniques, identifications fit/function - critical characteristics, standardization of acceptance criteria) Ensure NCR's (Nonconformance Reporting), inspection, SPC, Gauge Maintenance, Cost of Quality, internal audits, etc. are accurate and completed in a timely manner Lead/support problem resolution and responsiveness of all customer quality related issues Customer liaison Attend supplier conferences Review all 8D reports and corrective actions implemented Actively participate in APQP, FMEA and quote review meetings Ensure Division maintains IATF 16949 certification Improve and maintain accurate Quality procedures and manuals Qualifications, Education, Experience BS in Engineering or highly technical training equal to a 4-year program or 4-10 years of manufacturing experience in the metal working industry 5- 10 years of supervisory experience within a manufacturing environment Experience with formal documentation systems and methods particularly ISO9001 and IATF 16949 Experience in the automotive industry preferred. Precision Resource is an equal opportunity employer, M/F/D/V. To learn more, visit ********************************** Powered by JazzHR DLBqVwOV1r