Quality engineer jobs in Idaho

Job DescriptionQA & QC ManagerOcean Park Mechanical (OPM) is one of the premier design-build mechanical contractors of Western USA and Western Canada, with operations in Washington, Oregon, California, Idaho, and British Columbia. Specializing in value added engineering and design-build projects, our goal is always to build the most efficient systems for the best value possible. With projects ranging from low-rise and high-rise residential, hotels, and offices, as well as industrial and commercial projects, we have continually proven our ability and desire to provide the best service possible for our clients. By providing the majority of mechanical requirements in-house, including engineering, 3D-design, sheet metal, HVAC, refrigeration, and controls, we are a “ONE-STOP” shop for any project. Purpose of Position: The QA & QC Manager is responsible for the overall management of projects under their area of responsibility. They act as the primary point of contact for all project stakeholders and provide leadership and guidance to project team members. They ensure that our clients' expectations are met and that projects are completed on time, within budget, and in compliance with all standards and regulations. What We Offer: Competitive base salary: $75,000 to $95,000 D.O.E Company Paid Benefits: Medical, Dental, Life & Vision Supplemental Life Insurance Plan 401 (K) with Company Match up to 4% Paid Vacation Paid Sick Days Paid Holidays Job Location: Boise, ID Reporting Structure: The QA & QC Manager reports to the Project Manager, Superintendent, and the Regional Manager. Primary Responsibilities: Participate in design development process that pertain to QA/QC forms and inspection Oversee and distribute QA/QC project documentation Ensure required permits applications are submitted Quality management by focusing on quality requirements Field inspection of mechanical systems for quality control and assurance; observe, document and report all inspections and report all defects or issues to Project Manager/Superintendent/Site Leadership Work with project manager, superintendent, design team and site leadership to ensure site plans are followed Verify that appropriate inspections are completed for quality control and assurance Experience, Education & Qualifications: 5+ years of experience in Plumbing/HVAC project management AWS Certified Welding Inspector (CWI) Certification Jobsite experience would be considered an asset Ability to interpret blueprints, specifications, inspection reports, etc. Significant knowledge of construction methods as well as an understanding of municipalities and the permit processes Ability to manage multiple projects and tasks at a time Sound knowledge of Building Codes and Safety Regulations Strong knowledge of MS Office suite including MS Excel, and MS Project Knowledge of Viewpoint Spectrum ERP an asset Knowledge of Trimble AutoBid and Bluebeam an asset Skills & Proficiencies: Self-motivated and able to lead and motivate team members Thoughtful and confident decision making and high ethical standards Good verbal and written communication skills Good interpersonal skills and a high level of professionalism Problem-solving skills and the ability to think and react quickly under pressure Service-oriented approach in working with technical and non-technical business owners and different personality types Strong attention to detail and high level of organization Ocean Park Mechanical is an equal opportunity employer that values diversity and encourages applicants of all backgrounds. If you're interested in a fulfilling career with Ocean Park Mechanical, please submit your application. Only those candidates who meet the job requirements will be contacted for an interview. **No agency phone calls/emails/submissions please** Powered by JazzHR gZq32aXG9h

Full-time Description The Quality Manager is responsible for developing, managing, and continuously improving the Quality Assurance (QA) and Quality Control (QC) systems within Empire Aerospace. This role ensures compliance with applicable U.S. Federal Aviation Administration (FAA) Regulations (FARs), Transport Canada Civil Aviation Directorate (TCCA), European Aviation Safety Association (EASA), and the Bailiwick of Guernsey (BOG). Activities are conducted in accordance with applicable portions of the Maintenance Implementation Procedures (MIP) for Bilateral Aviation Safety Agreements (BASA), the approved maintenance program, customer requirements, and all associated manuals and work packages. The Quality Manager serves as the final authority for return-to-service authorizations and acts as the primary liaison with regulatory agencies, customers, and auditors on all quality matters. Duties and Responsibilities: Regulatory & Compliance Oversight Ensure compliance with FAA, TCCA, EASA, and BOG regulations, including BASA/MIP provisions. Maintain and update Repair Station, Ops Specs, and all regulatory supplements (FAA, TCCA, EASA, 2-Reg). Submit and manage all changes through FAA SAS portal and WebOPSS. Monitor regulatory changes and ensure timely updates to manuals, supplements, and quality systems. Quality System & Audit Management Oversee the Repair Station Quality Program as defined in the Repair Station Manual (RSM). Develop, implement, and maintain internal audit programs, including checklist updates. Conduct and manage customer, FAA, OSHA, Panhandle Health, COE, and other external audits. Manage Suspected Unapproved Parts (SUP) reviews and reporting. Ensure all audit findings are documented and tracked in the Safety Management System (SMS) audit log. Documentation & Reporting Maintain QA stamp control, certification logs, damage/incident reporting, and concern boxes. Prepare and submit quarterly Quality reports to the General Manager, including audit and incident summaries. Manage manual revisions, ensuring timely submissions to the FAA and other authorities. Ensure all technical publications, alert notices, and postings are current and distributed. Training & Personnel Management Serve as Training Manager for Quality Assurance staff, inspectors, and receiving personnel. Ensure production and QA teams follow Repair Station, regulatory, and customer requirements. Brief new employees during indoctrination training and oversee ongoing training compliance. Monitor inspector training, repairman certification, and NDT qualifications (including FedEx-authorized NDT). Customer & Vendor Oversight Maintain and update Quality Service Agreements with customers. Support Production and QA in meeting customer program requirements. Oversee vendor qualification, audits, and EARL (Empire Aerospace Approved Vendor List) updates. Coordinate Non-Incident (ATA 106) statements and other customer documentation requests. Authority Final approval authority for return-to-service of airframes, engines, propellers, appliances, and component parts (FAA Form 8130-3). Authority to stop work or reject materials that do not meet regulatory, customer, or company standards. Qualifications Demonstrated ability to read, write, and communicate effectively in English. Airframe and Powerplant certification. Strong knowledge of FAR Part 145 and associated international regulatory requirements (TCCA, EASA, BOG). Experience in Quality Management within an FAA-certified repair station or equivalent aviation environment. Proficiency with FAA SAS portal, WebOPSS, SMS, and associated regulatory submission systems. Leadership experience in auditing, training, and staff development. Strong organizational skills with the ability to manage multiple regulatory, customer, and internal requirements. Working Conditions: Work may be performed in a hangar environment and may require considerable outside work and up to 25% travel. Will be exposed to noise and hazards associated with aircraft maintenance. Requires standing, walking, sitting, bending and stooping for extended periods of time. May be required to lift to 80 pounds, plus ladder/lift usage. Requires manual dexterity, speaking, seeing and hearing to conduct business. Empire Airlines is a drug, alcohol and smoke-free workplace. Pay & Benefits: Starting annual salary range (DOE): $93,000 - $110,000 Annual increases and additional incentives once qualified. Benefits include Medical, Dental, Vision, 401k, PTO, Paid Holidays, Travel Benefits and more! Requirements Education and Experience: Must be appropriately certificated under FAR Part 145. Must have at least 18 months of practical experience in the procedures, practices, inspection methods, materials, tools, machine tools and other equipment generally used in the work for which the Repair Station is rated. Must read, write and understand English as well as have a working knowledge of the FARs, Air worthiness Directives, methods techniques and practices contained in the applicable manufacturer's maintenance and alteration documents and/or other data acceptable to, or approved by, the FAA as used by the Repair Station. The Quality Manager must have the appropriate experience, as evidenced by employment history, training, certification, personal interview or practical tests to perform in the position.

Job Description Project Manager needed for Leading OEM A renowned global leader in clean room, robotics, and fabrication machinery is seeking a dynamic Project Manager to join their team. The Project Manager will play a pivotal role in overseeing both ongoing and new projects, providing regular updates to leadership. Salary: $86,400-$110,000 + Bonus Locations: Openings in Salt Lake City, Utah and Boise, Idaho The Project Manager will be have the following Responsibilities: Implementing new equipment and modifying existing equipment (clean rooms and automation technology) Reviewing the overall scope of practice and defining it as needed. Collaborating with all departments to schedule preventative and corrective maintenance to meet daily targets. Providing regular updates to senior management on pertinent developments. Managing budgets, ensuring operational efficiencies within budgeted targets. Leading the team in designing and implementing new project plans. Communicating effectively with vendors, contractors, and suppliers to meet company needs. Ensuring safety conscious operations Managing performance of subcontractors Compiling data for efficient budgeting and project tracking. Distributing resources for the scope while monitoring the entire project. Addressing complaints and resolving problems within the organization. Promoting Occupational Safety standards in all work performed. The Project Manager needs to have the following qualifications: Bachelor's degree in Engineering or Industrial Engineering from a four-year college or university. Three years of direct experience in Project Management. Three years of experience leading and completing projects. MS Project experience on the job is required Natural leadership ability with critical thinking skills. Strong analytical skills and effective time management. Ability to write reports and business correspondence. Effective presentation skills for verbal communication and responding to questions from various stakeholders. Professional representation of the company in meetings with high-level customer representatives. Note: Travel requirement of up to 25%, including domestic and international with overnight stays. The Project Manager will be rewarded with: Annual Salary: $86,400-$110,000, Dependent on Experience. Bonus Profit share 401k with Company Match. Comprehensive Benefits Available at $40/month! Medical Dental Vision Opportunity for career growth! Must be authorized to work in the United States without sponsorship. This company uses E-Verify to confirm identity and employment eligibility.

Full-time Description Weiser Memorial Hospital--rated as one of Idaho's best places to work--is looking to hire a Quality and Risk Coordinator to join our team. The Quality and Risk Coordinator, under the direction of the Quality and Risk Manager, performs duties necessary to gather, organize, and report data that is aligned with regulatory standards and compliance requirements of a critical access hospital. The Quality and Risk Coordinator must possess strong organizational skills and always ensure confidentiality of all information. The Quality and Risk Coordinator will utilize software applications to the fullest to support ongoing quality improvement. Employs problem-solving, critical thinking, and solution-oriented skills to drive quality improvement initiatives. Weiser Memorial Hospital, a PERSI employer, offers a competitive benefits package in addition to continuing education and professional development opportunities. Benefits include, but are not limited to: Idaho State Retirement (PERSI) 401(k) Medical, dental, and vision insurance plans Discounted medical services Medical and dependent care savings plans Guaranteed life insurance Employee Assistance Program Voluntary Air St. Luke's Membership Weiser Memorial Hospital participates in eVerify and is an Equal Opportunity Employer. Weiser, ID, is located in Western Idaho, minutes away from I-84 and offers a lower cost of living than the national average, including nearby Boise. Weiser is well-known for its many rivers, access to outdoor recreational areas, and as the host of the annual National Old-time Fiddlers' Contest & Festival. Responsibilities: Participates in risk management and safety activities, including patient complaint or grievance resolution. Monitors for sentinel events and near miss occurrences and assists with data preparation for root cause analysis. Collects, analyzes and compiles reports from individual incident reports and occurrence information to allow for priority processing of performance improvement activities. Able to review and analyze internal data reports, including external sources such as DNV, state and federal sources. Assists with preparation for all regulatory surveys; DNV, State Licensing Review, CMS Validation Surveys, etc. Maintains current knowledge of hospital policies, DNV and CMS standards, local, state, and federal rules and regulations. Effectively collects and aggregates data. Maintains control of data/database related to the facility's performance improvement program. Inputs data into spreadsheets, databases, and programs. Create reports, graphs, and visual representations of the data for presentation to stakeholders. Provides timely reports that summarize the results of performance improvement programs; assesses the effectiveness and quality of redesigned processes. Demonstrates knowledge and competence in data management via electronic environment, including charts, graphs, grids and other accepted forms for data collection, analysis, and display. Prepare packets and presentations for committee meetings. Assist with committee meeting and take meeting minutes. Performs other duties as assigned Requirements Associate degree in business or a health care-related field. A combination of education & experience will be considered. Working knowledge of computer and software applications (word processing, graphics, databases, spreadsheets). Exemplary customer service, communication, and interpersonal skills. Minimum of two (2) years of healthcare experience. Able to communicate effectively in English, both verbally and in writing. Previous nursing, risk management &/or quality management experience preferred.

Weiser Memorial Hospital--rated as one of Idaho's best places to work--is looking to hire a Quality and Risk Coordinator to join our team. The Quality and Risk Coordinator, under the direction of the Quality and Risk Manager, performs duties necessary to gather, organize, and report data that is aligned with regulatory standards and compliance requirements of a critical access hospital. The Quality and Risk Coordinator must possess strong organizational skills and always ensure confidentiality of all information. The Quality and Risk Coordinator will utilize software applications to the fullest to support ongoing quality improvement. Employs problem-solving, critical thinking, and solution-oriented skills to drive quality improvement initiatives. Weiser Memorial Hospital, a PERSI employer, offers a competitive benefits package in addition to continuing education and professional development opportunities. Benefits include, but are not limited to: Idaho State Retirement (PERSI) 401(k) Medical, dental, and vision insurance plans Discounted medical services Medical and dependent care savings plans Guaranteed life insurance Employee Assistance Program Voluntary Air St. Luke's Membership Weiser Memorial Hospital participates in eVerify and is an Equal Opportunity Employer. Weiser, ID, is located in Western Idaho, minutes away from I-84 and offers a lower cost of living than the national average, including nearby Boise. Weiser is well-known for its many rivers, access to outdoor recreational areas, and as the host of the annual National Old-time Fiddlers' Contest & Festival. Responsibilities: Participates in risk management and safety activities, including patient complaint or grievance resolution. Monitors for sentinel events and near miss occurrences and assists with data preparation for root cause analysis. Collects, analyzes and compiles reports from individual incident reports and occurrence information to allow for priority processing of performance improvement activities. Able to review and analyze internal data reports, including external sources such as DNV, state and federal sources. Assists with preparation for all regulatory surveys; DNV, State Licensing Review, CMS Validation Surveys, etc. Maintains current knowledge of hospital policies, DNV and CMS standards, local, state, and federal rules and regulations. Effectively collects and aggregates data. Maintains control of data/database related to the facility's performance improvement program. Inputs data into spreadsheets, databases, and programs. Create reports, graphs, and visual representations of the data for presentation to stakeholders. Provides timely reports that summarize the results of performance improvement programs; assesses the effectiveness and quality of redesigned processes. Demonstrates knowledge and competence in data management via electronic environment, including charts, graphs, grids and other accepted forms for data collection, analysis, and display. Prepare packets and presentations for committee meetings. Assist with committee meeting and take meeting minutes. Performs other duties as assigned Requirements Associate degree in business or a health care-related field. A combination of education & experience will be considered. Working knowledge of computer and software applications (word processing, graphics, databases, spreadsheets). Exemplary customer service, communication, and interpersonal skills. Minimum of two (2) years of healthcare experience. Able to communicate effectively in English, both verbally and in writing. Previous nursing, risk management &/or quality management experience preferred.

**_What Application Development & Maintenance contributes to Cardinal Health_** Information Technology oversees the effective development, delivery, and operation of computing and information services. This function anticipates, plans, and delivers Information Technology solutions and strategies that enable operations and drive business value. Application Development & Maintenance performs configuration or coding to develop, enhance and sustain the organization's software systems in a cross-functional team environment through adherence to established design control processes and good engineering practices. This job family programs and configures end user applications, systems, databases and websites to achieve the organization's internal needs and externally-facing business needs. Application Development & Maintenance partners with business leaders, investigates user needs and conducts regular assessments, maintenance and enhancements of existing applications. The SAP Software Engineer focused on Data Conversions, Data Quality, and Reporting is responsible for designing, developing, and maintaining data solutions that ensure data integrity and enable effective business intelligence. The role combines technical skills in data migration and ETL processes with an understanding of data governance and reporting tools. **_What is expected of you and others at this level_** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **_Responsibilities_** + Design and execute data conversion strategies for SAP implementations and upgrades, including data extraction, transformation, and loading (ETL) from legacy systems into SAP. + Utilize SAP data migration tools such as SAP Data Services, LSMW, and Migration Cockpit to perform data loads and conversions. + Develop and maintain technical specifications, data mapping documents, and transformation rules. + Collaborate with business and technical teams to gather data requirements and ensure seamless data flow across systems. + Establish and maintain data quality frameworks to ensure the accuracy, consistency, and integrity of master and transactional data in SAP. + Perform data profiling, cleansing, and validation to identify and resolve data discrepancies before and after migration. + Define and monitor data quality metrics and key performance indicators (KPIs). + Work with business data stewards to correct data quality issues and promote data governance policies and standards. + Design, develop, and implement reporting solutions, dashboards, and analytical models using SAP technologies like SAP Analytics Cloud (SAC), SAP BW/4HANA, or SAP Fiori. + Translate business needs into technical specifications for reports and ad-hoc queries. + Optimize report performance and data extraction processes for efficiency. + Provide support and training to end-users on reporting tools to enable data-driven decision-making **_Qualifications_** + Bachelor's Degree in related field preferred or equivalent work experience preferred + Proven experience in SAP Data Conversions, migrations and ETL processes. + Proficiency with SAP data tools such as SAP Data Services, SAP BW/HANA or SAP Analytics Cloud + Strong knowledge of SQL, data modelling and database concepts + Experience with SAP modules and data structures (e.g., Master Data, Financials, Supply Chain, OTC, PTP processes). + Excellent analytical, problem solving and communication skills + Ability to work both independently and collaboratively with cross-functional teams **Anticipated salary range:** $94,900 - $135,600 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 01/20/2026 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

The Supplier Quality Engineer (SQE) ensures the reliability, compliance, and superior performance of supplied components and assemblies, with a heavy emphasis on electromechanics and injection molding. The SQE works closely with Procurement, Quality Assurance, Engineering, and external suppliers to improve quality, optimize processes, and meet stringent industry standards. Essential Duties and Responsibilities Lead the evaluation, qualification, and selection of new and existing suppliers through audits, assessments, and risk-based analysis. Review and approve supplier manufacturing processes, focusing on electromechanical assembly and molding parameters. Plan, schedule, and conduct supplier audits to evaluate compliance with quality management systems, regulatory standards, and contractual requirements. Partner with the Quality team on the inspection and testing of incoming materials, components, and products, ensuring conformity to specifications and regulatory requirements, ensuring timely resolution of any discrepancies or non-conformances with suppliers. Lead investigations of supplier-related quality issues, utilizing root cause analysis tools to drive effective corrective (CAR) and preventive actions (PAR). Track and report the status of actions related to nonconforming materials or processes (NCPs) to ensure timely closure. Develop and monitor key performance indicators (KPIs) for supplier quality, delivery, and responsiveness. Generate supplier scorecards and lead regular performance reviews, driving improvement initiatives as necessary. Maintain documentation of supplier quality activities and support compliance with relevant standards and audits. Ensure supplier compliance with regulatory and quality standards, including FDA 21 CFR Part 820, ISO 13485, QMS, and GMP requirements. Partner with Procurement, Quality Assurance, R&D and Engineering to ensure supplier quality requirements are integrated throughout the product lifecycle. Requirements Bachelor's degree in Mechanical, Electrical, Manufacturing Engineering, Materials Science, or related field. 3-5 years' experience in supplier quality engineering, preferably in electromechanics or injection molding industries. Experience in medical device development and manufacturing environment, preferred. Benefits Meaningful work in a rapidly growing company with opportunity for advancement Directly influence the quality of products and make a difference for patients worldwide Opportunities for professional and personal growth Base salary: $80,000 - $100,000 plus bonus Sentec offers competitive benefits like Medical, Dental, Vision, HSA, FSA, and 401K matching, as well as paid parental leave , a wellness stipend and tuition reimbursement. Sentec emphasizes employee voices and recognizes hard work making it a promising environment for professional growth. Sentec focuses on delivering impactful healthcare products and improving patient care. By choosing a career at Sentec, you're not just choosing a job - you're embracing the chance to make a real impact, contributing to the development of innovative medical solutions that support the wellbeing of individuals worldwide. Sentec is a Swiss-American medical device company specializing in respiratory care. Since its founding in 1999, Sentec utilizes a deep-tech approach that is founded on advanced science and avant-garde technologies for respiratory patients across care areas. Sentec provides healthcare professionals worldwide with non-invasive, continuous monitoring and effective therapeutic solutions.

Process Engineer will report to Plant Manager and based in East Java What you'll do You will need to give technical assistance for the production problems related to process and raw materials. Takes into consideration safety related problems and determines machines, raw material and workforce. To propose modification the production process What you'll bring Proficiency engineering, analytical and proper problem solving for any issues. Working effectively with cross-functional to ensure the quality standards are met. Why join us? Working with Etex Building Performance Indonesia, you will be keen to learn, grow and develop your career. You will be part of a strong team and benefit from career opportunities that come from a global company.

As a Manufacturing Engineer, you will be responsible for operating equipment - including furnaces, gloveboxes, welding systems, and more - at Oklo's fuel fabrication prototyping facility in Idaho Falls, ID. You'll be responsible for operating equipment, developing optimal process recipes for meeting product specifications and efficiency targets, authoring operating and maintenance procedures, collecting and summarizing equipment data, troubleshooting equipment challenges, performing equipment maintenance, and training future technicians on equipment operations. You'll also be expected to work directly with process engineers, quality personnel, and vendors as needed in order to perform your role and support Oklo's fuel fabrication needs. This is a hands on role where technical equipment and shop experience, as well as strong communication skills, are desired. Specific responsibilities may include: * Operate, monitor, and adjust fuel fabrication equipment - including furnaces, gloveboxes, welding equipment, extrusion presses, lifting devices, etc. - to ensure consistent production output that meets product specifications and performance standards. * Perform routine inspections, preventive maintenance, and repairs on mechanical, electrical, and control systems. * Diagnose and troubleshoot equipment and process issues, identifying root causes and implementing corrective actions. * Develop, document, and continuously improve standard operating procedures (SOPs) for equipment operation and maintenance. * Collaborate with engineering, production, and quality teams to optimize equipment settings and process parameters for yield, throughput, and reliability. * Analyze operational data to identify trends and opportunities for process improvement. * Assist in the installation, calibration, and qualification of new equipment and process tools. * Maintain accurate records of maintenance activities, equipment performance metrics, and operational adjustments. * Ensure all work is performed in compliance with safety regulations and company policies. * Provide training and guidance to other technicians and operators on equipment operation and best practices. Minimum Qualifications: * Currently lives in or is willing to relocate to Idaho Falls, ID. This is an onsite position in Idaho Falls. * 2+ years of experience in equipment operation, maintenance, or hands-on manufacturing role * High school diploma or GED required; technical certification or associate degree in mechanical, electrical, or industrial technology preferred. * Hands on experience with welding, assembly, and equipment operation * Strong understanding of mechanical, electrical, pneumatic, and/or automated control systems. * Experience with process optimization, data analysis, or continuous improvement methodologies (e.g., Lean, Six Sigma) preferred. * Ability to read and interpret technical manuals, schematics, and process documentation. * Proficiency with tools, test instruments, and computerized maintenance or process monitoring systems. * Excellent problem-solving, communication, and teamwork skills. * Able to stand for long periods, lift up to 50 lbs, and complete hands-on work with technical equipment. Bonus Qualifications: * Experience working within gloveboxes and/or nuclear fuel fabrication * Experience with equipment controls systems (operation, programming, etc. Competencies * Competent with performing equipment operation, installation, and maintenance functions * Competent with authoring equipment operating and maintenance procedures * Able to communicate effectively with engineers, vendors, and other team members * Able to document findings in presentation and report formats * Passionate about clean energy * An optimist at heart * Passionate about making advanced fission a reality * Willing and able to learn quickly * Willing to think differently and do things in new ways * Comfortable in a fast-paced, highly iterative startup environment * Excited to think creatively, critically, and reflectively about the problems they are solving while not leaning only on what has been done before * Willing to propose novel and creative solutions to technical problems * An excellent writer who can write in a modern active voice, so make your cover letter compelling and write it well! * Able to communicate technical content and results verbally * Willing to work within a fast-paced production and laboratory environment with moderate exposure to machinery, noise, and chemicals. Personal protective equipment (PPE) required for certain operations. Who you are: A startup person: You aren't driven by titles or hierarchy, and prefer efficiency to excess process. You don't need or expect to have a lot of guidance but you enjoy working in a fast-paced team. If you prefer the culture and feel of a large organization, that is great, but you likely won't enjoy working with us! There is plenty of important work and plenty of good opportunities with organizations like that. Motivated: You are self-motivated. You bring an enthusiasm to the team, and imbue a sense of passion that goes beyond clocking in and clocking out. This isn't about a fake or arbitrary "pieces of flair" mentality or lack of work-life balance! It is about being a part of the vision and feeling a part of reaching team goals. A team-player: Oklo genuinely is a team. We aren't about taking credit for ourselves, and we aren't about pushing blame to others. We do incredible things because we work as a team. An excellent communicator: We need a person who is not only technically competent but also a clear and upbeat communicator. Creative: Being creative means that when things fall outside clear scopes or processes or problems arise without clear solutions, you are able to identify it as well as invent ways to solve a problem or fill a need without micromanagement. The successful person in this job will not only be creative, but also enjoy being creative and solving open-ended problems which may change day-by-day. Detail-oriented: This focus is a big part of excellence, consistency, and quality. Excellent grammar and spelling matter for both good communication as well as the image of the company that we put forward. About Oklo travel requirements: Oklo requires remote employees to travel to headquarters (Santa Clara, CA) twice a quarter annually, based on business or team needs, including attendance at team meetings, off-sites, and other company events or gatherings. About Oklo compensation: Salary: $80,000-$110,000 Oklo offers flexible time off, equity, competitive pay, 401k, health insurance, FSA, flexible work hours, and other benefits. This position may involve access to information subject to U.S. export control laws. Only applicants who meet the definition of a U.S. person under applicable laws may be eligible. About Oklo Inc.: Oklo Inc. is developing fast fission power plants to deliver clean, reliable, and affordable energy at scale; establishing a domestic supply chain for critical radioisotopes; and advancing nuclear fuel recycling to convert nuclear waste into clean energy. Oklo was the first to receive a site use permit from the U.S. Department of Energy for a commercial advanced fission plant, was awarded fuel material from Idaho National Laboratory, and submitted the first custom combined license application for an advanced reactor to the U.S. Nuclear Regulatory Commission. Oklo is also developing advanced fuel recycling technologies in collaboration with the U.S. Department of Energy and U.S. National Laboratories. #CHOP: Oklo's Values Collaboration: We go further, together. We bring diverse perspectives, listen actively, and build trust through transparency and respect. We work across disciplines, sharing ownership to turn complex challenges into shared successes. Humility: We are team players who act for the good of the company and for the world. We are focused on our mission, not personal recognition. Ownership: We take pride in what we do and how we do it. We are proactive in finding solutions and see tasks through to completion. We are committed to delivering on our promises to provide clean, reliable, and affordable energy. Pathfinding: We chart new ground where no path exists by approaching challenges with curiosity, courage, and creativity while navigating ambiguity. Create a Job Alert Interested in building your career at Oklo? Get future opportunities sent straight to your email. Create alert

As a Manufacturing Engineer, you will be responsible for operating equipment - including furnaces, gloveboxes, welding systems, and more - at Oklo's fuel fabrication prototyping facility in Idaho Falls, ID. You'll be responsible for operating equipment, developing optimal process recipes for meeting product specifications and efficiency targets, authoring operating and maintenance procedures, collecting and summarizing equipment data, troubleshooting equipment challenges, performing equipment maintenance, and training future technicians on equipment operations. You'll also be expected to work directly with process engineers, quality personnel, and vendors as needed in order to perform your role and support Oklo's fuel fabrication needs. This is a hands on role where technical equipment and shop experience, as well as strong communication skills, are desired. Specific responsibilities may include: Operate, monitor, and adjust fuel fabrication equipment - including furnaces, gloveboxes, welding equipment, extrusion presses, lifting devices, etc. - to ensure consistent production output that meets product specifications and performance standards. Perform routine inspections, preventive maintenance, and repairs on mechanical, electrical, and control systems. Diagnose and troubleshoot equipment and process issues, identifying root causes and implementing corrective actions. Develop, document, and continuously improve standard operating procedures (SOPs) for equipment operation and maintenance. Collaborate with engineering, production, and quality teams to optimize equipment settings and process parameters for yield, throughput, and reliability. Analyze operational data to identify trends and opportunities for process improvement. Assist in the installation, calibration, and qualification of new equipment and process tools. Maintain accurate records of maintenance activities, equipment performance metrics, and operational adjustments. Ensure all work is performed in compliance with safety regulations and company policies. Provide training and guidance to other technicians and operators on equipment operation and best practices. Minimum Qualifications: Currently lives in or is willing to relocate to Idaho Falls, ID. This is an onsite position in Idaho Falls. 2+ years of experience in equipment operation, maintenance, or hands-on manufacturing role High school diploma or GED required; technical certification or associate degree in mechanical, electrical, or industrial technology preferred. Hands on experience with welding, assembly, and equipment operation Strong understanding of mechanical, electrical, pneumatic, and/or automated control systems. Experience with process optimization, data analysis, or continuous improvement methodologies (e.g., Lean, Six Sigma) preferred. Ability to read and interpret technical manuals, schematics, and process documentation. Proficiency with tools, test instruments, and computerized maintenance or process monitoring systems. Excellent problem-solving, communication, and teamwork skills. Able to stand for long periods, lift up to 50 lbs, and complete hands-on work with technical equipment. Bonus Qualifications: Experience working within gloveboxes and/or nuclear fuel fabrication Experience with equipment controls systems (operation, programming, etc. Competencies Competent with performing equipment operation, installation, and maintenance functions Competent with authoring equipment operating and maintenance procedures Able to communicate effectively with engineers, vendors, and other team members Able to document findings in presentation and report formats Passionate about clean energy An optimist at heart Passionate about making advanced fission a reality Willing and able to learn quickly Willing to think differently and do things in new ways Comfortable in a fast-paced, highly iterative startup environment Excited to think creatively, critically, and reflectively about the problems they are solving while not leaning only on what has been done before Willing to propose novel and creative solutions to technical problems An excellent writer who can write in a modern active voice, so make your cover letter compelling and write it well! Able to communicate technical content and results verbally Willing to work within a fast-paced production and laboratory environment with moderate exposure to machinery, noise, and chemicals. Personal protective equipment (PPE) required for certain operations. Who you are: A startup person: You aren't driven by titles or hierarchy, and prefer efficiency to excess process. You don't need or expect to have a lot of guidance but you enjoy working in a fast-paced team. If you prefer the culture and feel of a large organization, that is great, but you likely won't enjoy working with us! There is plenty of important work and plenty of good opportunities with organizations like that. Motivated: You are self-motivated. You bring an enthusiasm to the team, and imbue a sense of passion that goes beyond clocking in and clocking out. This isn't about a fake or arbitrary “pieces of flair” mentality or lack of work-life balance! It is about being a part of the vision and feeling a part of reaching team goals. A team-player: Oklo genuinely is a team. We aren't about taking credit for ourselves, and we aren't about pushing blame to others. We do incredible things because we work as a team. An excellent communicator: We need a person who is not only technically competent but also a clear and upbeat communicator. Creative: Being creative means that when things fall outside clear scopes or processes or problems arise without clear solutions, you are able to identify it as well as invent ways to solve a problem or fill a need without micromanagement. The successful person in this job will not only be creative, but also enjoy being creative and solving open-ended problems which may change day-by-day. Detail-oriented: This focus is a big part of excellence, consistency, and quality. Excellent grammar and spelling matter for both good communication as well as the image of the company that we put forward. About Oklo travel requirements: Oklo requires remote employees to travel to headquarters (Santa Clara, CA) twice a quarter annually, based on business or team needs, including attendance at team meetings, off-sites, and other company events or gatherings. About Oklo compensation: Salary: $80,000-$110,000 Oklo offers flexible time off, equity, competitive pay, 401k, health insurance, FSA, flexible work hours, and other benefits. This position may involve access to information subject to U.S. export control laws. Only applicants who meet the definition of a U.S. person under applicable laws may be eligible. About Oklo Inc.: Oklo Inc. is developing fast fission power plants to deliver clean, reliable, and affordable energy at scale; establishing a domestic supply chain for critical radioisotopes; and advancing nuclear fuel recycling to convert nuclear waste into clean energy. Oklo was the first to receive a site use permit from the U.S. Department of Energy for a commercial advanced fission plant, was awarded fuel material from Idaho National Laboratory, and submitted the first custom combined license application for an advanced reactor to the U.S. Nuclear Regulatory Commission. Oklo is also developing advanced fuel recycling technologies in collaboration with the U.S. Department of Energy and U.S. National Laboratories. #CHOP: Oklo's Values Collaboration: We go further, together. We bring diverse perspectives, listen actively, and build trust through transparency and respect. We work across disciplines, sharing ownership to turn complex challenges into shared successes. Humility: We are team players who act for the good of the company and for the world. We are focused on our mission, not personal recognition. Ownership: We take pride in what we do and how we do it. We are proactive in finding solutions and see tasks through to completion. We are committed to delivering on our promises to provide clean, reliable, and affordable energy. Pathfinding: We chart new ground where no path exists by approaching challenges with curiosity, courage, and creativity while navigating ambiguity.

Buck Knives creates purpose driven knives that perform for generations. We are looking for an Manufacturing Engineer to join our team to efficiently produce our legendary products. In-Person attendance required, no remote work. No relocation assistance available. SUMMARY This position primarily supports operations through the following initiatives Refining and standardizing processes Leading and participating with lean and continuous improvement projects Reducing and standardizing machine setup Trouble shooting and resolving quality related issues as well as reducing scrap and rework Developing cost reduction programs through analysis of alternative materials and processes Be the responsible engineer on production released designs, ensuring smooth transition from design to production. Assist with the introduction of new products from the design and development phase to production release. ESSENTIAL DUTIES and RESPONSIBILITIES The essential duties and responsibilities include but are not limited to the following: Lead continuous improvement teams to analyze and improves manufacturing methods by implementing solutions such as using new or improved fixtures, machinery, equipment or handling methods. Use root cause analysis methods to troubleshoot and resolve manufacturing-related issues. Provide quotes and cost estimates of improvement efforts including but not limited to fixtures, machinery, handling methods or new materials. Communicates with vendors and purchasing to determine product specifications and arrange for purchase of equipment, materials, or parts. Communicate with management, new products, and other staff regarding current manufacturing capabilities and ideas on developing future capabilities. Improve overall processing of material in various fabrication and assembly processes through data collection and analysis by reducing cycle time, lead time, cost and quality defects. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Develop and maintain process documentation, including work instructions, drawings, 3D CAD models and standard operating procedures. Develop project plans and own responsibility for completion of milestones that identify all project steps, resources required and capital requirements. Provide technical support and training to production staff as needed. Must possess strong problem-solving skills and ability to work well within cross-departmental groups and clearly communicate solutions. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION & EXPERIENCE Bachelor degree or equivalent from four-year University or Technical school in one of the following disciplines: Manufacturing Engineering Industrial Engineering Mechanical Engineering 5 years of related experience and/or training; or equivalent combination of education and experience in a lean based manufacturing environment. Solidworks experience required. AutoCAD experience a plus. PLC programming experience preferred. Proficient at the use of Microsoft Office Suite (Excel, Project, Word) Intermediate understanding of Machine G&M code, CAM programming experience preferred. Experience with metal working (grinding, machining, heat treating) preferred Experience with Lean Methodologies such as Kaizen, Value Stream Maps, 5S, and 8 Wastes. Professional Skills Ability to read, interpret and develop documents such as blueprints, safety regulations, operating/maintenance instructions, and procedure manuals into visual work instructions for employees. Strong analytical skills Excellent problem-solving skills Pro-active approach to problem solving Relevant technological knowledge Ability to lead and work independently Strong written and verbal communication skills Ability to work effectively in a dynamic, fast-paced environment. Ability to identify and implement cost-saving initiatives.

Job Title-Quality Technician Pay $26.62 Contract 9-80 A|1st Shift|07:30 AM|N A Quality Technician job opportunity is open with our client in West Caldwell, NJ. In this role you will be responsible for ensuring the accuracy of production records, discrepancy reports, and supplier documentation. To be considered for this role you will have a minimum three (3) years of quality assurance experience. As a Quality Technician, you will support our team of quality engineers by providing both technical and administrative assistance. You will be responsible for ensuring the accuracy of production records, discrepancy reports, and supplier documentation. Additionally, you will collaborate with operations, quality, purchasing, and stockroom to help achieve team objectives and drive continuous improvement. Job Responsibilities: * Collaborate with operations, quality, purchasing, and stockroom to help achieve team objectives and drive continuous improvement * Responsible for ensuring the accuracy of production records, discrepancy reports, and supplier documentation. * Accurately completes AS9102 First Article Inspection Report (FAIR) and other dimensional inspection reports. * Accurately reviews AS9102 First Article Inspection Report (FAIR) and other dimensional inspection reports from suppliers. * Accurately compiles and completes End Item Data Packages (EIDP) * Administrate and maintain calibration system complying to AS9100 and ISO 17025 for equipment. * Updating calibration system cycle inventory across sites. * Serve as the ESD coordinator for the site * Perform comprehensive ESD program audits per ANSI/ESD S20.20 standards * Inspect all grounding systems, flooring, and workstations, carts and shelving unit * Verify compliance with Mercury Systems" internal ESD policies * Test equipment calibration & certification * Data Review, Reporting & Corrective Actions * Navigates internal company software and database systems to gather quality data information. * Administrate and maintain calibration system to current updates. * Create and submit Purchase Requisition (PR) to procurement department for Purchase Order release. * Request quotes from external calibration houses. * Coordinate with operations on site calibration schedule for stationary equipment. * Support QA receiving inspection, in-process inspection and final inspection activities * Interprets and understand drawings, specifications, customer requirements * Works effectively with and communicates with various departments including operations, planning, quality, and QC inspection * KPI/Metrics Review & Reporting * Maintain and ensure accurate record-keeping of production documentation * Collect and Index supplier-provided documentation for components and service * Engagement with process audits, reviews, and revisions. Required Qualifications: * Typically requires a minimum three (3) years of quality assurance experience * High School diploma or General Education Degree (GED) * Previous AS9102 First article inspection experience * Previous AS9100 Quality Management Standard experience. * Previous IPC-A-610 and IPC-J-STD-001 training and/or certification. * Familiar with GD&T terminologies print reading * Experience with electrical and mechanical inspection tools. * Strong PC skills with Microsoft Office - Excel, Word, Power Point, Minitab, JMP and database systems * Must currently have or be eligible to obtain a DoD Secret clearance Preferred Qualifications: * Experience in aerospace and defense industry * Experience with any of the following business application systems - Oracle, Factory Logics, Power BI, Tableau, Agile, Net-Inspect. If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com.EOE/F/M/Disability/Veterans

Advanced Input Systems (AIS) is a premier designer and manufacturer of Human Machine eXperience (HMX) products and solutions. We develop both standard products and OEM custom solutions across a diverse range of markets including medical, industrial, defense, and commercial. Our product lines include electro-mechanical assemblies, virtual reality and wearable technologies, infection control devices, touchscreen displays, and control panels. We are seeking a Process Manufacturing Engineer to join our team. This role supports production by developing, improving, and maintaining manufacturing processes and systems to ensure the efficient, safe, and high-quality assembly of electronic and electro-mechanical products. You will collaborate closely with Design, Manufacturing, Quality, Test, and Automation Engineering teams to support new product introduction (NPI), drive continuous improvement, and ensure operational excellence across the production environment. AIS fosters a collaborative, fast-paced, and innovative work culture. We value empowered problem solvers who thrive in a dynamic, mid-sized company environment. Key Responsibilities Serve as a first-line technical resource to support daily production needs, including troubleshooting and optimizing manufacturing processes, test systems, and production equipment. Lead root cause analysis and implement corrective actions for quality and process-related issues. Perform and coordinate preventive maintenance activities for production equipment; maintain equipment logs and PM schedules. Collaborate with cross-functional teams to develop and refine manufacturing processes, tools, and fixtures for new and existing products. Support process validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ). Create and maintain process documentation, including work instructions, control plans, and process flow diagrams. Drive continuous improvement initiatives to increase throughput, improve quality, reduce waste, and lower production costs. Participate in capital equipment planning, justification, and implementation (CAPEX). Provide support for NPI builds including process definition, documentation, and operator training. Contribute to APQP/PPAP activities and ensure robust process readiness for production launch. Assist product development teams in prototyping and transitioning designs into manufacturable products. Interpret technical drawings, schematics, and documentation to support assembly processes and test development. Qualifications Essential: Strong technical knowledge of electronics manufacturing processes and production systems. Proficiency in analyzing and troubleshooting mechanical, electrical, and process-related issues. Understanding of ESD best practices and electronic component handling. Familiarity with quality standards and inspection criteria (e.g., IPC-A-610). Experience with Lean Manufacturing principles and Six Sigma tools. Strong interpersonal, written, and verbal communication skills. Demonstrated initiative, problem-solving ability, and collaborative mindset. Proficiency in MS Office applications and ability to use basic statistical analysis tools. Capable of managing multiple tasks and shifting priorities in a dynamic environment. Preferred: Experience in electronics or electro-mechanical product manufacturing. Familiarity with process automation, motion control, or vision systems. Ability to create or interpret test plans and equipment specifications. Working knowledge of software such as LabVIEW, Visual Basic, or equivalent. Exposure to CAD tools (e.g., SolidWorks) and basic PCB layout understanding. Hands-on soldering experience and IPC certification. Comfort with electronic test equipment such as multimeters, oscilloscopes, and power supplies. Basic knowledge of device communication protocols and system integration. Education & Experience Associate's or Bachelor's degree in Engineering (Manufacturing, Mechanical, Electrical, or related field) or equivalent technical training. • Minimum of 6 years of relevant manufacturing engineering experience, preferably in electronics or high-mix, low-volume production environments. AIS is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. We encourage applicants of all backgrounds to apply.

Job DescriptionSalary: DOE Manufacturing Engineer II As a Manufacturing Engineer, you will be responsible for the sustainment and continuous improvement of the semiconductor manufacturing equipment and processes of your assigned area(s). Typical duties will include daily systematic review of key input and output parameters to ensure equipment and process performance is in accordance with expected levels, ownership and driving of resolution when they are not, and strong engagement with the operations workforce to enable an increased level of awareness in all aspects of manufacturing, e.g., Safety, Quality, Delivery and Cost. Duties and Responsibilities: Utilization of Fault Detection Control (FDC) and Statistical Process Control (SPC) systems to monitor equipment and process performance Owns 24 x 7 continuity for troubleshooting and resolution of equipment and process related issues Spending significant time, i.e., 50%, on the manufacturing floor to monitor area performance, troubleshoot, engage, and mentor operations workforce (including off-shifts) Ensure timely disposition of hold material Provide clear and concise updates to management through verbal and written communication, e.g., morning operations meeting, weekly reports, CAB, OSIR (one-pagers), etc. Organize and drive cross-functional breakout teams to quickly address quality or other related manufacturing issues, e.g., defectivity excursion Identify, develop, and execute continuous improvement projects that are aligned with the mission and strategic vision of the site Leading and participation in continuous improvement Kaizen Events Maintaining of area specific documentation to ensure incorporation of best-known methods (BKMs) Directing of assigned area technicians Required Skills and Abilities: Demonstrated safety first mentality Strong sense of ownership and accountability for assigned areas overall performance Acts with a sense of urgency Ability to understand complex semiconductor equipment and processes Expertise in structured problem solving, e.g., 6 methodologies Ability to prioritize work utilizing a data centric approach, e.g., Pareto or Impact Matrix Strong collaboration skills; promotes good teamwork among internal and external resources Education: B.S. in Mechanical, Chemical, Electrical Engineering, or Materials Science and 2-5 years of directly related experience. ***Applicants must be authorized to work in the U.S. without requiring visa sponsorship.*** Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible schedule Flexible spending account Health insurance Health savings account Life insurance Opportunities for advancement Parental leave Referral program Tuition reimbursement Vision insurance

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. The Process Engineer (PE) is a critical member of Creation's Engineering Team and subject matter expert (SME) in equipment and methods of manufacturing circuit card assembly (CCA) and/or box assembly. The PE understands and executes equipment selection, performance, maintenance, and validation. PE will work in collaboration to analyze and resolve a variety of technical issues related to quality and manufacturing. The PE will ensure equipment utilization to its capabilities and optimizes performance. This position directly reports to the Process Engineering Leader. DUTIES/ RESPONSIBILITIES: * Develop, configure and optimize industrial processes * Interface with the Project Engineers, Production Associates, Process Process Engineers and Management to support a six (6) day a week manufacturing operation and achieve the following: * Improved efficiency (Performance to Standard, Turn around time, Changeover time) * High first pass yields (SMT, TH) * Best quality (DPMO) * Work on continuous improvement of the processes on the production floor to improve quality and cycle time by focusing on: * Defect data analysis * Assembly tools and fixtures * Automation of processes and equipment * Elimination of redundant and non-value-added operations * Optimizing the product flow * Proactively pursue better methods and/or new technologies in order to assist the customer in improving the product design and enabling Creation to produce a better product, cost effectively * Key focus on surface mount assembly equipment including pick and place, printing and reflow to enhance equipment performance, support the operators in on-going process improvement and training QUALIFICATIONS: * Manufacturing Process Expert in the area of SMT or Wave soldering * Minimum 5 years of process engineering experience or equivalent direct technical support of an electronics assembly process * Knowledge of Process control methodologies (SPC, Cp, Cpk,) * Process Expert in one or more of SMT, Wave soldering, and Mechanical Assembly * Must have excellent communication skills, technical writing abilities, analytical skills, be a team player and able to take independent decisions related to the job function * At least four years of manufacturing experience in electronic manufacturing with a focus on SMT or Wave soldering * Knowledge of IPC documentation * Application of Six sigma and lean manufacturing principles * Able to flex schedule in support six (6) day a week manufacturing operation, as needed If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! Creation Technologies is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you require any accommodations to complete the application process or need the job posting in an alternative format, please email Accessibility@creationtech.com. You will be connected with our Talent Acquisition team. If you are contacted regarding the position, please inform our Talent Acquisition team of any accommodations you may need during the recruiting process. All information related to accommodation requests will be handled confidentially. Canada: Title for the position will be in accordance with applicable national and local laws.

onsemi is seeking a Manufacturing Probe Process Engineer with onsemi in Nampa, Idaho, who will support the manufacture and testing of Image Sensor parts. The primary responsibility of the Manufacturing Probe Process Engineer is to sustain probe processes and drive engineering issues to resolution with the objective to minimize impacts to the time it takes to successfully test a given manufacturing lot. The Probe Process Engineer will actively support the shift Probe Technicians and Engineers with issues and events that occur, helping them minimize equipment downtime. **onsemi** (Nasdaq: ON) is driving disruptive innovations to help build a better future. With a focus on automotive and industrial end-markets, the company is accelerating change in megatrends such as vehicle electrification and safety, sustainable energy grids, industrial automation, and 5G and cloud infrastructure. With a highly differentiated and innovative product portfolio, onsemi creates intelligent power and sensing technologies that solve the world's most complex challenges and leads the way in creating a safer, cleaner, and smarter world. **More details about our company benefits can be found here:** ********************************************** We are committed to sourcing, attracting, and hiring high-performance innovators, while providing all candidates a positive recruitment experience that builds our brand as a great place to work. **onsemi** is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, ancestry, national origin, age, marital status, pregnancy, sex, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, gender identity, gender expression, or any other protected category under applicable federal, state, or local laws. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact ***************************** for assistance.

Job Title: Event Staff/Security Company: BEST Crowd Management Pay: $18.00/ hr Job Type: Part-time Join the dynamic team at BEST Crowd Management as an Event Staff / Security professional. In this role, you will have a diverse range of responsibilities, combining event staff duties with security tasks to ensure a safe and enjoyable experience for event attendees. We are seeking adaptable individuals with excellent communication skills and a strong commitment to customer service and safety. Responsibilities: Assist with event setup, including the arrangement of equipment, signage, and other necessary materials. Monitor access points and conduct thorough security checks to prevent unauthorized entry and ensure the safety of attendees. Provide friendly and helpful customer service by assisting attendees with inquiries, directions, and general event information. Collaborate with event staff and security personnel to maintain a safe and organized environment. Assist in crowd management, including controlling entry and exit points and ensuring proper flow of attendees. Respond promptly and effectively to security incidents or emergencies, following established protocols. Monitor event areas to enforce event rules, regulations, and safety procedures. Handle and resolve attendee complaints or conflicts in a calm and professional manner. Adhere to company policies, procedures, and guidelines to deliver a high standard of service and security. Requirements: Be at least 18 years old (age requirements may vary depending on local regulations). Possess excellent communication and interpersonal skills to interact effectively with event attendees. Strong observational and problem-solving skills to identify and address potential security risks or issues. Ability to remain calm and composed in high-pressure situations and handle challenging individuals. Availability to work flexible hours, including evenings, weekends, and holidays, based on event schedules. Physical fitness and stamina to stand, walk, and perform duties for extended periods. Must pass a background check. Benefits: Enjoy competitive pay based on your experience and qualifications. Gain experience in event management and security. Enhance your skills in communication, problem-solving, and customer service. Network with professionals from various fields, including event management and security. Be part of a supportive team that values teamwork, professionalism, and attendee satisfaction. Note: At BEST Crowd Management, we believe in equal opportunities for all applicants and employees. We highly appreciate the contributions and perspectives that each individual brings to our team.

QA & QC ManagerOcean Park Mechanical (OPM) is one of the premier design-build mechanical contractors of Western USA and Western Canada, with operations in Washington, Oregon, California, Idaho, and British Columbia. Specializing in value added engineering and design-build projects, our goal is always to build the most efficient systems for the best value possible. With projects ranging from low-rise and high-rise residential, hotels, and offices, as well as industrial and commercial projects, we have continually proven our ability and desire to provide the best service possible for our clients. By providing the majority of mechanical requirements in-house, including engineering, 3D-design, sheet metal, HVAC, refrigeration, and controls, we are a “ONE-STOP” shop for any project. Purpose of Position: The QA & QC Manager is responsible for the overall management of projects under their area of responsibility. They act as the primary point of contact for all project stakeholders and provide leadership and guidance to project team members. They ensure that our clients' expectations are met and that projects are completed on time, within budget, and in compliance with all standards and regulations. What We Offer: Competitive base salary: $75,000 to $95,000 D.O.E Company Paid Benefits: Medical, Dental, Life & Vision Supplemental Life Insurance Plan 401 (K) with Company Match up to 4% Paid Vacation Paid Sick Days Paid Holidays Job Location: Boise, ID Reporting Structure: The QA & QC Manager reports to the Project Manager, Superintendent, and the Regional Manager. Primary Responsibilities: Participate in design development process that pertain to QA/QC forms and inspection Oversee and distribute QA/QC project documentation Ensure required permits applications are submitted Quality management by focusing on quality requirements Field inspection of mechanical systems for quality control and assurance; observe, document and report all inspections and report all defects or issues to Project Manager/Superintendent/Site Leadership Work with project manager, superintendent, design team and site leadership to ensure site plans are followed Verify that appropriate inspections are completed for quality control and assurance Experience, Education & Qualifications: 5+ years of experience in Plumbing/HVAC project management AWS Certified Welding Inspector (CWI) Certification Jobsite experience would be considered an asset Ability to interpret blueprints, specifications, inspection reports, etc. Significant knowledge of construction methods as well as an understanding of municipalities and the permit processes Ability to manage multiple projects and tasks at a time Sound knowledge of Building Codes and Safety Regulations Strong knowledge of MS Office suite including MS Excel, and MS Project Knowledge of Viewpoint Spectrum ERP an asset Knowledge of Trimble AutoBid and Bluebeam an asset Skills & Proficiencies: Self-motivated and able to lead and motivate team members Thoughtful and confident decision making and high ethical standards Good verbal and written communication skills Good interpersonal skills and a high level of professionalism Problem-solving skills and the ability to think and react quickly under pressure Service-oriented approach in working with technical and non-technical business owners and different personality types Strong attention to detail and high level of organization Ocean Park Mechanical is an equal opportunity employer that values diversity and encourages applicants of all backgrounds. If you're interested in a fulfilling career with Ocean Park Mechanical, please submit your application. Only those candidates who meet the job requirements will be contacted for an interview. **No agency phone calls/emails/submissions please**

onsemi is seeking a Manufacturing Probe Process Engineer with onsemi in Nampa, Idaho, who will support the manufacture and testing of Image Sensor parts. The primary responsibility of the Manufacturing Probe Process Engineer is to sustain probe processes and drive engineering issues to resolution with the objective to minimize impacts to the time it takes to successfully test a given manufacturing lot. The Probe Process Engineer will actively support the shift Probe Technicians and Engineers with issues and events that occur, helping them minimize equipment downtime. Requirements: Bachelors of Science Degree in an engineering discipline or equivalent process engineering experience. Understanding of statistical process control. Excellent data summary and analytical skills. Strong approach for troubleshooting. Strong communication, documentation, and organizational skills. Innovative and self-motivated attitude. Works well both independently and with teams. Ability to follow written or verbal work instructions. Ability to perform duties in a clean room environment. Willingness to work overtime as needed Build knowledge and an understanding of probe processes, become point of contact for probe process issues. Investigate EFAR/IFAR/Assembly issues and support findings efforts. Support the shift Probe Technicians and Engineers with issues that impact testing. Knowledge of the equipment (IP750 testers, Accretech Probers, ESI lasers, Camtek RDA, and Screen scrubbers) will be gained through on-the-job training and working with the equipment owners and the shift technicians/engineers. Attend daily yield meetings and provide guidance to shift eng and ES for any on-going issues Develop engineering skills to evaluate probe results, implement solutions, and make recommendations for process improvements. Identify probe yield and setup issues and work with the appropriate cross-functional teams to develop solutions. Prepare thorough reports for tool issues/improvements, process issues/improvements, and project status reports. Create Work Instructions, BKM's, and any associated training certifications for any new/improved processes. Using and driving yield improvement with SkySight software to identify issues real time and set up pause / hold limits and dashboards Support NPI (New Product Introduction) and transfer to MP (Mass Production) Support MFG Engineer and be able to perform duties as a backup Support in data collection and analysis for any experiments performed by Probe Equipment team. Camtek recipe writing - New recipes for Fuse Inspection, Post Probe Inspection, and PMI. Also training/mentoring Shift Eng.