Quality engineer jobs in Indianapolis, IN - 448 jobs

Construction Quality Manager (Quality Manager / Quality Control Manager) The Construction Quality Manager is responsible for planning, implementing, and overseeing quality control processes to ensure construction work meets contract requirements, design documents, applicable codes, and company standards. This role partners closely with project management, field supervision, subcontractors, and inspectors to proactively prevent defects and drive consistent, high-quality execution across all phases of construction. Key Responsibilities Quality Planning & Systems Develop and manage Project Quality Plans (PQP) or Quality Control Plans Establish inspection and testing procedures aligned with contract documents Ensure compliance with project specifications, drawings, and applicable codes Maintain quality documentation, logs, and records Field Quality Oversight Conduct regular jobsite quality inspections and audits Verify work in place meets approved submittals and specifications Identify nonconforming work and lead corrective action plans Coordinate inspections with owners, third-party inspectors, and authorities having jurisdiction (AHJs) Subcontractor & Trade Partner Management Review subcontractor quality plans and procedures Verify trade compliance with installation standards and best practices Participate in pre-installation meetings and first-in-place inspections Support subcontractor buyout and onboarding from a quality standpoint Coordination & Communication Partner with Project Managers and Superintendents to integrate quality into daily operations Support constructability reviews and design clarification efforts Facilitate lessons learned and continuous improvement discussions Provide clear, timely communication to internal and external stakeholders Testing, Documentation & Closeout Track and manage material testing, inspections, and special inspections Review and maintain quality-related submittals and reports Support punch list completion and project closeout documentation Assist with turnover packages and warranty documentation Continuous Improvement & Training Promote a culture of “build it right the first time” Train project teams and trade partners on quality expectations and standards Identify recurring issues and recommend process improvements Support company-wide quality initiatives and standardization efforts Qualifications Required Bachelor's degree in Construction Management, Engineering, or related field (or equivalent experience) 5+ years of construction experience with increasing responsibility for quality or field operations Strong understanding of construction means and methods Working knowledge of construction codes, standards, and inspection processes Preferred Experience in commercial, healthcare, industrial, or institutional construction Experience with owner, GC, or CM quality programs Certifications such as: CQM (USACE) CQE, CQA, or similar (a plus) Skills & Competencies Strong attention to detail and documentation Ability to lead and influence without direct authority Excellent communication and conflict-resolution skills Proactive, solution-oriented mindset Comfortable working in the field and office environments Work Environment Primarily jobsite-based with regular field presence Collaboration with project teams, owners, inspectors, and trade partners Travel between project sites may be required Career Path Senior Quality Manager Director of Quality Operations or Project Leadership roles

Our team is looking for a candidate with a strong background in Quality Assurance and Quality control in a heavy industry construction environment. This role will be working to support the construction of a brand new pharmaceutical manufacturing plant. The duration of contract length is 18 months with possible extension. This role is eligible for PD. CWI is required for this role. Essential Functions & Responsibilities: QA/QC Planning & Oversight Develop and implement site-specific QA/QC plan for logistics, rigging, and equipment connection activities Oversee inspection and testing to ensure compliance with project drawings, specifications, and industry standards Compliance & Standards Ensure all work aligns with procedures, client standards, and applicable codes Monitor crane and rigging activities for conformance with engineered lift plans Validate welds, bolted connections, and alignments meet tolerance requirements Documentation & Reporting Maintain QA/QC records, inspection reports, nonconformance logs, and corrective action reports Prepare turnover packages, as-built quality documentation, and close-out records Provide quality status updates and risk mitigation input to leadership and client representatives Issue Management & Continuous Improvement Identify/document nonconformances, coordinate corrective actions, and verify resolutions Support root cause analysis and ensure lessons learned are captured and communicated Collaboration Work closely with Project Managers, Site Supervisors, Safety Managers, and Planners to align QA/QC with execution plans Attend project meetings and provide expert input on quality issues and risks Serve as client-facing representative for all quality-related matters Qualifications: Minimum 5+ years of QA/QC management experience in industrial construction, rigging, or millwright/ironworker environments Certifications such as CWI (Certified Welding Inspector), NDT Level II/III, or other relevant credentials Strong knowledge of steel erection, heavy rigging, crane operations, and equipment setting quality standards Familiarity with welding and bolting inspection requirements (AWS, AISC, or equivalent) Proven ability to develop and enforce site-specific QA/QC plans Strong skills in documentation, reporting, and client-facing communication Preferred: Experience in pharmaceutical or advanced manufacturing construction. Prior engineered heavy lift/logistics QA/QC experience Familiarity with ISO 9001 or equivalent quality management systems Other Skills and Abilities Required: Ability to work in outdoor industrial construction environments Capable of walking the site, climbing scaffolding/ladders, and overseeing rigging operations in real time Self-motivated and has a willingness to learn Familiar with a variety of the field's concepts, practices, and procedures A wide degree of creativity and latitude is expected Able to handle high paced work environment The ability to communicate well with customers and other MATRIX and customer/client employees Must be dependable. Must have proficient computer skills. MATRIX is a proud Service Disabled Veteran Owned Business and an Equal Opportunity Employer.

Job Title: Process Maintenance Technician/Engineer Duration: 01 year Flexibility with Schedules Work schedule would likely start as a standard work schedule (M-F days) and then would move to a shift schedule. Would move to shift schedule as of March 2026: • Mon - Thur Nights (1900-0500) - 10 hr shift • Fri - Sun Days (0700-1900) - 12 hr shift • Fri - Sun Nights (1900-0700) - 12 hr shift Expected Hours: 40 hours per week / potential for overtime but n Potential for extension: Based on availability, budget, and business needs Work model: 100% onsite (northern Indianapolis 46268) will confirm should candidate interview due to client confidentiality Desired Start: ASAP Overtime: potential for overtime but needs approval Duration: 12 months Summary: The Process Maintenance Technician plays a critical role in ensuring the reliability and performance of production and support equipment in a regulated pharmaceutical manufacturing environment. This role involves executing reactive, preventive, and predictive maintenance, troubleshooting mechanical, hydraulic, pneumatic, and control systems, and supporting GMP-compliant operations. The technician may work one of various shift patterns, including 8, 10, or 12 hours, occurring on days or nights, weekdays or weekends, and be 100% on-site at the client facility. Key Responsibilities •Perform maintenance activities in compliance with cGMPs and SOPs. •Assemble, disassemble, install, repair, and replace components for pharmaceutical-grade machinery and cleanroom equipment. •Troubleshoot and resolve issues in mechanical, electrical, pneumatic, and PLC-controlled systems. •Maintain accurate documentation including Maintenance and Calibration Records per cGMP standards. •Inspect equipment for wear, irregularities, and potential failures. •Collaborate with cross-functional teams (Quality, Engineering, Production) to ensure equipment reliability and compliance. •Execute scheduled PMs and CMMS updates in a timely and accurate manner. •Maintain tools and workspaces in accordance with cGMP housekeeping standards. •Adhere to OSHA, and site-specific safety protocols. •Participate in continuous improvement initiatives and equipment reliability programs. •Support audits and inspections by regulatory bodies and internal quality teams. •Other duties as assigned. Metrics for Success •PM completion rate and CMMS accuracy •Equipment, uptime and reliability •Compliance with GMP documentation standards •Audit readiness and deviation reduction •Responsiveness to unplanned maintenance events Experience Required: •Minimum 3-5+ years of experience in mechanical maintenance within pharmaceutical, biotech, or regulated manufacturing environments. •Strong mechanical aptitude with troubleshooting and critical thinking skills. •Familiarity with demands of performing maintenance activities in a cGMP environment. •Ability to interpret technical documentation and engineering drawings. •Strong communication, organizational, and analytical skills. •Comfortable working in confined spaces, heights, and around chemicals. •Ability to use basic hand tools, power tools and meters (DVM, Amp and Ohm). Other Preferred • Certification in First Aid or CPR • Familiarity with ISO standards and FDA audit processes. • Experience supporting equipment qualification (IQ/OQ/PQ). • Experience with aseptic processing, HVAC systems, and utility maintenance is a plus. • Technical diploma or degree in Mechanical Engineering or equivalent. • Proficiency in troubleshooting PLCs, HMIs, and automated systems. • Skilled in using lathes, mills, grinders, and precision instruments. Must have: GNP maintenance experience (3 years minimum exp) Pharma experience (4 - 5 years) Significant years' experience in process systems Parallel to regulatory requring food & beverage or Healthcare related Pharma 4-5 years of experience Nice to have Additional Notes: Willing to accept out of state candidates as long as they are willing to commute/relocate at their own expense. Interview Schedule: 2 rounds of interviews, 60 minutes virtual, 2nd maybe onsite

Job Responsibilities Monitor and analyze manufacturing and equipment performance data to drive continuous improvement and support investigations. Lead implementation and execution of standardized decontamination protocols across filling and packaging lines. Mentor team members on process improvements, sterilization technologies, equipment requalification, and aseptic practices. Lead technical investigations using structured problem-solving methodologies (e.g., DMAIC, root-cause analysis). Act as the primary technical representative on cross-functional teams to resolve deviations, equipment failures, and process challenges. Evaluate and integrate new technologies such as advanced sterilization or automated filling systems into GMP operations. Develop and author protocols, reports, technical rationales, and documentation supporting qualification, validation, and lifecycle activities. Adapt quickly to evolving client and production needs, including occasional support for 24/7 operations. Job Requirements Minimum 5+ years of experience in a pharmaceutical manufacturing environment. Bachelor's degree or higher in an engineering discipline. Strong background in pharmaceutical sterile manufacturing operations. Proven ability to communicate complex technical information clearly to cross-functional or non-technical audiences. Familiarity with data analytics, root-cause methodologies, and risk-based decision making.

Pepper Construction is building a culture of quality where project teams and trade partners take ownership of the work and build it right the first time. Our Quality Department team members provide industry-leading expertise and advice in Building Enclosure and MEP Systems, lead the quality process and are a valuable resource to our project teams. Our company vision is to deliver the ultimate experience to our clients, trade partners, and each other while being leaders in our industry and community. Our Quality team plays a big part in achieving this vision. A typical week for a Quality Manager may include the following: Running preinstallation meetings with our trade partners Walking a jobsite to evaluate construction work in-place Writing quality observation reports following a site visit Performing a constructability review for a future project Developing a job specific quality plan with a project team The Quality Manager is always on the go and generally sets their own schedule, typically managing the quality process for several projects at a time. Our quality team members attend 4-5 national conferences or training events every year to develop their knowledge and maintain their credentials. Pepper's Quality Department leads quarterly internal training for our project managers and superintendents to keep our quality culture fresh and present the details of a technical topic. The ideal Quality Manager is a sharp, curious, problem-solver and an excellent communicator. They are interested in the details of construction and seek to understand the best way to put things together. The Quality Engineer serves as a resource to the project team in the areas of project delivery, constructability, workflow and sequencing, and proper installation techniques. MAJOR RESPONSIBILITIES: Assist Project Teams: Leads Project Teams in developing the Job Specific Quality Plan. Reviews Construction Documents, Specifications, Shop Drawings, and Submittals with the intent to identify challenges and opportunities. Assist Trade Partners: Leads project Quality pre-installation meetings with Trade Partners. Works with subcontractors to develop and implement Trade Partner Job Specific Quality Plans. Conduct Quality Site Visits: Reviews and documents work in the field. Photographs and discusses work in place with the project team. Writes reports for each site visit, providing directions and suggestions to correct improper work-in-place. Assist in Preconstruction: Conducts constructability reviews of future jobs to identify risks and incorporate lessons learned and best practices before construction starts. Education & Growth: Participates in education and growth opportunities to remain relevant and aware of current trends affecting construction and quality. Attend industry events in the local area and out of town events four to five times a year. Past conferences have included organizations such as Air Barrier Association of America (ABAA), International Institute of Building Enclosure Consultants (IIBEC), World of Concrete, American Contractors Insurance Group (ACIG), Construction Specifiers Institute (CSI), Building Enclosure Science and Technology (BEST), and more. Expertise: The Quality Engineer will have a general understanding of all elements of construction but will develop focused expertise in building enclosure, concrete, metal stud framing and drywall, flooring, and life safety systems. POSITION REQUIREMENTS: Education: Bachelor's degree in Construction Management, Engineering, Architecture, or related field. Experience: 3+ years' experience in Construction Management, Design, Construction Technology, or Construction Testing. Strong background and understanding of Construction Documents and Submittals. A general understanding of the construction process and how buildings go together is required. Knowledge of or experience with building enclosures, concrete, drywall framing, life safety, and flooring are a plus. Certifications: Building Enclosure Certifications such as Registered Roof Observer (RRO), Registered Exterior Wall Observer (REWO), Certified Air Barrier Specialist (CABS) are a plus. Concrete certifications from ACI are a plus. Attributes: Excellent problem-solving skills with a strong curiosity for how systems operate together. Always maintains a calm demeanor. Able to explain things clearly both verbally and in writing. Self-motivated and able to work independently or as part of a team. Travel: Able to travel throughout Central Indiana but will typically be home every night. Pepper will provide a company vehicle or stipend for local travel. Overnight travel is required 4-5 times per year for conferences. Physical Requirements: Must be able to visit and work within an active multi-level construction site, including the use of ladders, scaffolds, and lifts. Must be able to stand and walk for long periods of time when necessary. Must be able to wear personal protective equipment for several hours per day. Schedule: Daily work schedule is typically between 8AM - 5PM. Applicants whose background is exclusively in manufacturing will not meet the requirements for this role.

Be Part of an Extraordinary Team A proud member of the Elevance Health family of companies, Paragon Healthcare brings over 20 years in providing life-saving and life-giving infusible and injectable drug therapies through our specialty pharmacies, our infusion centers, and the home setting. Title: Quality of Life Program Manager- Paragon Ideal candidates will be comfortable traveling 60-70% of the time to local Hemophilia chapters across the U.S. The ability to attend Programs scheduled on nights and weekends will be required. Field: This field-based role enables associates to primarily operate in the field, traveling to client sites or designated locations as their role requires, with occasional office attendance for meetings or training. This approach ensures flexibility, responsiveness to client needs, and direct, hands-on engagement. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law. Build the Possibilities. Make an Extraordinary Impact. The Quality of Life Program Manager- Paragon is responsible for developing and implementing innovative ""Quality of Life"" (QOL) programs for individuals with bleeding disorders to drive health outcomes and improve therapy adherence. How you will make an impact: Primary duties may include, but are not limited to: * Collaborate with territory representatives to leading the increased business generation and customer retention. * Develops and maintain business relationships with local chapters, clinics, and healthcare providers to enhance the business unit presence and impact in respective territories. * Utilize lifestyle tools and resources within the QOL program to empower patients in managing their health, thus fostering a sense of control over their condition. * Strategically integrate QOL initiatives into sales efforts to shorten the sales cycle and promote seamless health management solutions for patients. * Leverage the QOL program as a significant referral source, contributing to business growth while maintaining cost-effectiveness compared to traditional event sponsorships. * Monitor and evaluate the effectiveness of QOL programs regularly, making data-driven adjustments to ensure optimal patient engagement and satisfaction. * Collaborate with cross-functional teams to align QOL initiatives with overall company objectives and marketing strategies. Minimum Requirements: * Requires a BA/BS degree and a minimum of 10 years of related experience in Specialty Pharmacy; and experience in marketing software (Aperture and Photoshop); or any combination of education and experience which would provide an equivalent background. * Joint Health, Health and Nutrition and CPR certification are required. Preferred Skills, Capabilities and Experiences: * Prior experience as a professional Public Speaker is strongly preferred. For candidates working in person or virtually in the below location(s), the salary* range for this specific position is $71,544 to $112,194 Locations: Colorado, Washington State In addition to your salary, Elevance Health offers benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). The salary offered for this specific position is based on a number of legitimate, non-discriminatory factors set by the Company. The Company is fully committed to ensuring equal pay opportunities for equal work regardless of gender, race, or any other category protected by federal, state, and local pay equity laws. * The salary range is the range Elevance Health in good faith believes is the range of possible compensation for this role at the time of this posting. This range may be modified in the future and actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. Even within the range, the actual compensation will vary depending on the above factors as well as market/business considerations. No amount is considered to be wages or compensation until such amount is earned, vested, and determinable under the terms and conditions of the applicable policies and plans. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

Starting Pay $23.000 increasing to $24.00 after completion of training. Shift and Schedule * 12 hour shift (7pm - 7am) * Continental schedule (2/2/3) The Quality Control Technician is responsible for inspecting and assessing the quality of injected plastic products to ensure they meet established company and customer standards during incoming quality control, in process quality control and outgoing quality control. They use a variety of precision tools and equipment to measure and test materials, as well as identify defects or deviations in the manufacturing process. Their insights drive continuous improvement initiatives within the production team, ensuring consistent product quality. Additionally, they collaborate with the manufacturing team and other departments to implement corrective actions and improve overall production standards. Responsibilities for this position include: * Perform incoming quality control inspections on components by interpreting, measuring, and verifying dimensions meet tolerances according to drawings using standard measuring tools and equipment. * Test raw materials using melt flow index tester and moisture analyzer. * Perform in process quality control on product during the manufacturing process for adherence to company and customer requirements using equipment and visually inspection. * Audit product and process for conformance to standards. * Interpret and report testing results and compare them to established specifications and control limits. Generate inspection reports and accept or reject finished goods. * Conduct routine and non-routine analyses of in-process materials, raw materials, and finished goods. * Record inspection and testing data into appropriate systems. Maintain accurate and up-to-date logs. * Review documentation for compliance and maintain traceability records. * Collaborate with production teams to address quality-related issues (product & process). * Familiar with computers, able to navigate excel, email, data entry, multiple operating systems, take photos of product and upload them to designated location. Requirements Requirements * Intelligence: Requires the ability to learn and understand relatively complex principles and techniques related to administrative and clerical duties; to make independent judgments without supervision; to acquire knowledge of topics related to primary occupation. * Verbal Aptitude: The ability to record and deliver information, explain procedures, and follow oral and written instructions. * Numerical Aptitude: Requires the ability to utilize mathematical formulas; add, subtract, multiply, and divide figures. * Physical lifting and movement: Ability to walk or stand 12 hours a day. Ability to lift, push, pull or move 35 pounds and stoop, bend, or reach above the shoulders. Qualifications: * High School Diploma or equivalent. * Good written and verbal communication skills required. * Able to make a decision based on data and standards. * Previous quality experience in a manufacturing environment is preferred. * High attention to detail and commitment to maintaining accurate documentation. * Ability to work collaboratively in a team environment and contribute to a positive, supportive at

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. **Job Posting External** **Primary Responsibilities** + Responsible for the daily tactical quality support of manufacturing components/processes and assembly processes/outputs. + Implement containment actions for non-conformances ensuring impact to production is minimal. + Participate in quality assurance audits. + Maintain/update quality control documents. + Utilize basic inspection equipment and blueprint reading. + Assist in the evaluation and disposition of non-conforming product. + Provide metrics and input for the Quality function to other departments. + Review and verify corrective actions for effectiveness to prevent reoccurrences **Qualifications** + A two-year college degree and/or ASQ Certification as a Quality Technician preferred. + Three to five years' experience in quality and/or manufacturing related fields desirable. + Must have good problem solving skills. + Working knowledge of advanced mathematics, including statistical techniques, SPC, Capability Analysis and Gage R+R is required. + Must be able to apply quality tools for continuous improvement (FMEA). + Must know basic inspection and testing concepts, how to read blueprints and GD+T information. Must possess good communication skills - both verbal and written. + Must possess the ability to work effectively and maintain a professional composure with other employees. + Requires understanding of basic PC computer application skills, including database, spreadsheets and word-processing. **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Provides technical oversight of the process equipment and is responsible for ensuring that the equipment remains in a qualified state in order to support the manufacture of bulk drug substance. Key Objectives/Deliverables: Process and Equipment Support: * Equipment owner integrating process, process safety, environmental requirements and equipment knowledge. * Monitor established equipment systems for process indicators to identify potential issues affecting production. * Investigate and resolve equipment performance issues. * Technical expert/support for installation and maintenance of process equipment and equipment improvements. * Develop training / tools for operations to transfer knowledge of equipment capabilities and operational techniques to operations and maintenance. Improving the Business or Process: * Identify/Implement improvement projects for capacity, product quality, raw material cost, emissions/waste loads, process variability and process safety. * Perform and summarize improvement opportunities in technical reports * Understand process/unit capacity constraints. * Lead or participate in equipment/process qualification activities (including commissioning activities of new equipment or areas). Health, Safety and Environmental Management: * May provide the technical leadership and problem solving skills for Health, Safety and Environmental incident investigations. * Perform compliance related technical tasks such as emissions calculations, equipment evaluation, and application of material balances for env needs. * Lead and/or participate in process hazard reviews and other process safety activities, main resource for process safety issues on supported processes. Adherence to Business Systems: * Manage the implementation of countermeasures arising from deviations, spills, and safety related events. * Manage the implementation of recommendations from PHRs and other audit findings. * Maintain training compliance. * Maintain and establish the equipment technical information for the process; * Equipment procedures, P&IDs, Material of Construction Compatibility Index, Equipment information in PFDs, Aspen models, Material & Energy Balances, Process Safety Information Basic Requirements: * Bachelor of Science Degree in Engineering * 2+ years of pharmaceutical manufacturing (or equivalent), preferably in API Additional Preferences: * Ability to apply fundamental engineering principles to process understanding, problem solving and process improvement. * Ability to function in a team environment * Effectively manage and prioritize competing priorities and to appropriately communicate verbally and in writing to various audiences. * Available on call to address processing emergencies over the phone and at times return to the plant during off-hours. * Experience with Change Management, Deviation Management, Periodic Reviews, Commissioning and Qualification, Routine Data Monitoring * Ability to apply statistical thinking concepts to the analysis of manufacturing processes * Visualize an operation/process and reflect it in a model * Root cause analysis and the problem solving * Process Hazard Identification/ Mitigation Skills * Strong Computer skills in a variety of software packages (Batch Plus, JMP, Visio, PI Data Historian, MS Project, Excel) * Experience with normal processing equipment/unit operations Other Information: * This position serves an extended coverage night shift position: 3pm to 3am, 3 days on with 3 days off. Shift premium is included for this position. Situations may arise where off-schedule work, both on-site and off-site, will be required. * This position works weekends and holidays per shift schedule. * This position requires little to no travel. * Tasks require entering manufacturing and laboratory areas, which require wearing appropriate PPE and the ability to access plant operating equipment including climbing of stairs and ladders. * This position requires 24/7 availability via cell phone. Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $66,000 - $149,600 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Starting Pay $23.000 increasing to $24.00 after completion of training. Shift and Schedule 12 hour shift (7pm - 7am) Continental schedule (2/2/3) The Quality Control Technician is responsible for inspecting and assessing the quality of injected plastic products to ensure they meet established company and customer standards during incoming quality control, in process quality control and outgoing quality control. They use a variety of precision tools and equipment to measure and test materials, as well as identify defects or deviations in the manufacturing process. Their insights drive continuous improvement initiatives within the production team, ensuring consistent product quality. Additionally, they collaborate with the manufacturing team and other departments to implement corrective actions and improve overall production standards. Responsibilities for this position include: Perform incoming quality control inspections on components by interpreting, measuring, and verifying dimensions meet tolerances according to drawings using standard measuring tools and equipment. Test raw materials using melt flow index tester and moisture analyzer. Perform in process quality control on product during the manufacturing process for adherence to company and customer requirements using equipment and visually inspection. Audit product and process for conformance to standards. Interpret and report testing results and compare them to established specifications and control limits. Generate inspection reports and accept or reject finished goods. Conduct routine and non-routine analyses of in-process materials, raw materials, and finished goods. Record inspection and testing data into appropriate systems. Maintain accurate and up-to-date logs. Review documentation for compliance and maintain traceability records. Collaborate with production teams to address quality-related issues (product & process). Familiar with computers, able to navigate excel, email, data entry, multiple operating systems, take photos of product and upload them to designated location. Requirements Intelligence: Requires the ability to learn and understand relatively complex principles and techniques related to administrative and clerical duties; to make independent judgments without supervision; to acquire knowledge of topics related to primary occupation. Verbal Aptitude: The ability to record and deliver information, explain procedures, and follow oral and written instructions. Numerical Aptitude: Requires the ability to utilize mathematical formulas; add, subtract, multiply, and divide figures. Physical lifting and movement: Ability to walk or stand 12 hours a day. Ability to lift, push, pull or move 35 pounds and stoop, bend, or reach above the shoulders. Qualifications: High School Diploma or equivalent. Good written and verbal communication skills required. Able to make a decision based on data and standards. Previous quality experience in a manufacturing environment is preferred. High attention to detail and commitment to maintaining accurate documentation. Ability to work collaboratively in a team environment and contribute to a positive, supportive at

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Plant Process EngineerAssists with the improvement of processes in the manufacturing plant. Evaluates existing processes and identifies opportunities for quality or efficiency improvement, as well as cost-savings measures. Responsibilities are broad in scope but include all mechanical and electrical engineering aspects of high volume beverage production and supporting systems. Essential Functions Develop monitoring systems which will evaluate the health of process equipment Analyze work flows within and across all plant departments defining Activities, Connections and Flows by direct observation of work. Conducting tests throughout all stages of production to determine control over applicable variables and troubleshooting/solving production problems Process optimization along with the maintenance of existing programs. Design workspace layouts estimate space requirements and line layouts as required Work with Engineers in Packaging and Product Development to develop local manufacturing processes in support of company objectives Review the KPI monitoring systems and determine ways to improve current methods as well as implementation of new processes Utilize an analytical process to support Capital and Expense spend decisions within the plant Assist CI Manager and Plant Engineer in implementation of capital projects Visit other Niagara plants and Suppliers to benchmark best practices and audit CAPAs Prepare product and process reports by collecting, analyzing, and summarizing information and trends. Develop testing equipment and methods as required Assist with JSA and development of procedures to ensure workplace safety Provide technical support to technicians and management Develop and provide training to Managers, Supervisors and operators on new processes and maintain documentation Maintain current knowledge of emerging hardware and software technologies and manufacturing processes Key contributor to ensuring overall plant safety, being an active advocate for team member safety. Drive to continuously improve safety behaviors, environment and culture. Be a vocal safety advocate in all plant management meetings and initiatives. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: Bachelor's Degree in Engineering, or other related technical field OR Associate's Degree complimented with Six Sigma certifications Preferred: Master's Degree in Engineering, or other related technical field Certification/License: Required: N/A Preferred: Six Sigma Green Belt Foreign Language Required: None Required Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Requirements Qualifications: 1+ year experience with food handling or processing Familiarity of GMPs and HACCP Inquisitive and detail-oriented mind set Comfortability in computer systems and programs Degree or applicable experience in Agriculture, Food Science, Chemistry (Preferred)

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose Utilize engineering methods to engage in continuous improvement activities, while improving SQDCM (Safety, Quality, Cost, Delivery, Morale, Environment) characteristics. Key Accountabilities Root cause identification and countermeasure for complex problems Data analysis for identification of improvement activities Completion of studies (project/plant characteristic impacts) Work closely with other engineering groups to develop solution and implement countermeasures Manage projects (Mass production) Develop processes from drawing Work with production team to understand new processes Work with counterparts in other North American plants to understand change points Data analysis/trend identification Maintaining/achieving production targets (budgets/efficiency/quality/delivery) Qualifications/Experience/Skills Minimum Educational Qualifications: Bachelor's degree in engineering field or equivalent related experience Minimum Experience: Prefer intern or co-op experience (1-2 terms) or related work experience at two years Other Job-Specific Skills: Strong continuous improvement mindset; MS office; problem solving/decision making skills; project management capabilities Working Conditions Shift rotation when needed and weekend work when needed What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

QUALITY TECH PURPOSE This role is to provide quality inspection, continuous improvement, and general quality support within the organization. This position requires attention to detail, ability to understand and follow established processes, and product evaluation skills. A successful candidate will be competent in reading and understanding basic blueprints and completing routine inspections. ESSENTIAL DUTIES The Quality Technician may be responsible for performing any of the following types of inspections: Incoming Inspections: evaluate incoming materials and components for conformance to specific criteria. Incoming inspections will be performed using dimensional, visual, and process related criteria to determine suitability for use. A base understanding of metrology, traceability, and product preservation is required for this function. In-process Inspections: evaluate product in various stages of the process either internally or after being processed by a third party. Accurate recordkeeping and an understanding of proper document control practices is essential to success in this role Final Inspections: evaluation of product prior to release for shipment to the customer. This will include assisting with completing and compiling documentation for First Article Inspection packets as well as production inspection records. Ability to interact with all areas of production to maintain efficient product throughput. Review production records for accuracy and compliance. Ability to work in clean room environment including adherence to gowning, cleanliness, and procedural standards. Work with a high level of precision and detail. Participation in auditor development program and ability to learn and master auditing practices and principles. Work in a team environment for an increased productivity and quality by ensuring quality and timely outputs while working with a continuous improvement mindset. Understand and follow all company policies and safety procedures. All other duties as assigned by the supervisor. PHYSICAL DEMANDS/WORK ENVIRONMENT Capacity to work indoors in an office, laboratory, and/or manufacturing environment. Ability to work in a stationary position for prolonged periods of time. Capability to lift objects or equipment weighing up to 40 pounds with or without reasonable accommodation. Physical aptitude to use basic hand tools in a laboratory and/or manufacturing environment. Ability to attend meetings locally for trainings. MINIMUM REQUIREMENTS 2 Year technical degree or equivalent prior quality experience in a production environment working with multiple products/product lines. Available to work first shift with occasional overtime on evenings/weekends if needed. Intermediate computer and math skills including ability to use Excel and Microsoft Teams. Ability to evaluate requirements, understand technical documents, and keep thorough, organized records. Familiarity with reading part prints and detailed specification review. Ability to use hand tools and measuring devices such as calipers, micrometers, height gauges, surface roughness meters, Go/no-go gauges, pin gauges, comparators, borescopes, sight pipes, etc... Communicate effectively. Ability to perform multiple tasks while adhering to procedural guidelines with minimal supervision. Provia, Syteline, and Excel spreadsheets experience in a work environment a plus. Prior ISO Class 5 clean room experience a plus. Experience with Vision Systems, CMMs, Comparators, borescopes or Sight Pipes a plus. For internal use only: Quality001

Job Description Responsibilities • Support receiving inspection process including visual and dimensional verification of mechanical assemblies per engineering requirements and operations schedules. Complete and electronically store receiving inspection checklists. • Utilize calipers, tape measures, blueprints, and Microsoft excel. • Perform data collection/analysis and electrical hardware functionality/verification per work instructions, checklists, and engineering requirements. Utilize Microsoft Excel, Word, and PowerPoint, multimeters, test fixtures, tape measures, CAN-testing tools, and proprietary software. • Ensure that each final assembly has a complete quality document package including completed checklists, data files and product pictures. • Ensure that non-conforming products are identified appropriately with a complete description and inform the appropriate department. Ensure that deviations from requirements, if applicable, are approved prior to acceptance of product. Qualifications • Must be able to organize and prioritize job related duties based upon operations schedules. • Ability to handle dynamic priorities and remain flexible. • Must have the ability to work independently and self-motivated • Must have excellent oral/written communication skills. Ability to communicate clearly with multiple departments. Must have proficient use of computers and Microsoft Office suite • Must be able to use basic hand tools including wrenches, drivers, and riveters • Must be able to lift 50 pounds, sometimes in a twisting or bending form. • High school diploma minimum. Electrical background is a plus • Mon-Fri 7AM to 3:30PM core hours • Occasional overtime including weekends required

Join MIASA Automotive as a Quality Technician in Yorktown, IN Are you passionate about ensuring the highest quality standards in the automotive industry? MIASA Automotive is seeking a talented Quality Technician to join our team in Yorktown, IN. As a Quality Technician, you will play a crucial role in maintaining and improving the quality of our products through continuous monitoring, testing, and improvement initiatives. Your expertise and attention to detail will be instrumental in upholding our reputation for excellence and customer satisfaction. Responsibilities: Develop and implement product FMEAs and Quality Control Plans for new and existing products. Develop and implement supporting inspection instructions and criteria to maintain compliance with customer requirements. Reviews and organizes statistical data on quality of production by line, shift, department to produce recommendations. Continuously reviews the economics of the quality program and makes recommendations for improvement. Establishes and maintains effective work relationships with internal and external customers which broadly includes suppliers and stakeholders. Maintains the professional competence, knowledge and skills necessary for the satisfactory performance of all assigned responsibilities. Other duties as assigned Qualifications: Ability to manage projects with limited supervision. Excellent written and verbal communication skills. Systematic problem solving skills. Working knowledge of Quality Systems and related tools. Planning and organization. Experience in conducing or preparing for IAFT system audits Minimum three years of manufacturing environment. Eight Discipline Problem Solving training or experience Core Competencies: Basic knowledge of GD&T Adhere to rules, regulations and/or policies and procedures If you are a detail-oriented professional with a passion for quality assurance, we want to hear from you. Join MIASA Automotive as a Quality Technician and take your career to the next level! About MIASA Automotive: MIASA Automotive is a leading manufacturer of automotive components and systems, specializing in interior and exterior lighting solutions. With a strong commitment to quality, innovation, and customer satisfaction, we have established ourselves as a trusted partner to top automotive brands worldwide. Our state-of-the-art facilities and dedicated team of professionals ensure that we deliver cutting-edge products that exceed industry standards. At MIASA Automotive, we are driven by a passion for excellence and continuous improvement, making us a preferred choice for automotive lighting solutions. To ensure a safe and compliant work environment, all candidates receiving a conditional offer of employment will be required to successfully complete a criminal background check and pre-employment drug screening. Employment is contingent upon passing both screenings.

DHL Supply Chain is Hiring! At DHL, you will play a part in one of the world's most essential industries. There has never been a better time to join DHL Supply Chain. In a global business like ours, the opportunities are endless. So, join us. Work with us. Grow with us. The core responsibilities of this role include: Ensure accurate checking, inspecting and/or counting of all products for both inbound and outbound departments and ensuring all product is free of damage or defect. Position: Quality Tech II Shift: Monday - Friday 7am - 3pm Pay: $20.00 per hour In addition to the general job description below, the ideal candidate will also possess the following skills and/or experience: Supply Chain, Quality Control, Auditing, Product Compliance, Material or Product Inspection A minimum of one (1) years' experience in the following: * Ensure accurate checking, inspecting and/or counting of all products for both inbound and outbound departments and ensuring all product is free of damage or defect. * Auditing product and packaging/labeling to maintain highest level of product compliance and accuracy * Ensure the quantity, quality, labeling, and shipping address of orders correspond to customer specifications or other requirements. * Experience using a commercial WMS (warehouse management system) such as Blue Yonder, Red Prairie, JDA, SAP, etc. * Microsoft Office software, including Excel. Be part of the world's largest logistics company!DHL Supply Chain hasbeen certified as a Great Place to Work in the US and Canada! Our excellent benefits packages includes: * Affordable medical, dental, and vision coverage available beginning on your 30thday * PTO program for all associates, including paid holidays and vacation * 401(k) with generous company match * Tuition reimbursement program * Excellent training and career advancement opportunities Grow your skills. Shape your world. Role Purpose: Execute assigned tasks to support establishment, maintenance, alignment and continual improvement of the QA System. Responsible for day-to-day Quality Assurance activities to ensure compliance with governmental regulations, customer requirements, quality assurance policies and procedures and accommodating requests for support. Key Accountabilities: * Perform Quality audits, inspections and documentation. * Perform daily quality assurance activities as required or directed by management. * Monitor and report level of QMS implementation, compliance and effectiveness through audit activities, observation, review of quality metrics and customer feedback. * Support QA training for new and existing associates. * Support coordination of QA license, permit and registration activities. * Work with Quality Assurance, Ops Performance and Process Improvement teams to progress Quality initiatives. Required Education and Experience: * High School Diploma or Equivalent * Forklift operator certificate or satisfactory completion of forklift training program with the first 30 days of employment * Associate degree or equivalent in related field of study, preferred Our Organization is an equal opportunity employer. #LI-Onsite #LI-DNI ","title

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Primary Responsibilities * Responsible for the daily tactical quality support of manufacturing components/processes and assembly processes/outputs. * Implement containment actions for non-conformances ensuring impact to production is minimal. * Participate in quality assurance audits. * Maintain/update quality control documents. * Utilize basic inspection equipment and blueprint reading. * Assist in the evaluation and disposition of non-conforming product. * Provide metrics and input for the Quality function to other departments. * Review and verify corrective actions for effectiveness to prevent reoccurrences Qualifications * A two-year college degree and/or ASQ Certification as a Quality Technician preferred. * Three to five years' experience in quality and/or manufacturing related fields desirable. * Must have good problem solving skills. * Working knowledge of advanced mathematics, including statistical techniques, SPC, Capability Analysis and Gage R+R is required. * Must be able to apply quality tools for continuous improvement (FMEA). * Must know basic inspection and testing concepts, how to read blueprints and GD+T information. Must possess good communication skills - both verbal and written. * Must possess the ability to work effectively and maintain a professional composure with other employees. * Requires understanding of basic PC computer application skills, including database, spreadsheets and word-processing. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Indianapolis Job Segment: Maintenance, Database, Warehouse, Quality Assurance, Plant, Manufacturing, Technology

Quality Control - Quality Technician The Quality technician I may be responsible for performing any of the following types of inspections: Incoming Inspections: evaluate incoming materials and components for conformance to specific criteria. Incoming inspections will be performed using dimensional, visual, and process related criteria to determine suitability for use. A base understanding of metrology, traceability, and product preservation is required for this function. In-process Inspections: evaluate product in various stages of the process either internally or after being processed by a third party. Accurate recordkeeping and an understanding of proper document control practices is essential to success in this role Final Inspections: evaluation of product prior to release for shipment to the customer. This will include assisting with completing and compiling documentation for First Article Inspection packets as well as production inspection records. Ability to interact with all areas of production to maintain efficient product throughput. Review production records for accuracy and compliance. Ability to work in clean room environment including adherence to gowning, cleanliness, and procedural standards. Work with a high level of precision and detail. Participation in auditor development program and ability to learn and master auditing practices and principles. Work in a team environment for an increased productivity and quality by ensuring quality and timely outputs while working with a continuous improvement mindset. Understand and follow all company policies and safety procedures. All other duties as assigned by the supervisor. PHYSICAL DEMANDS/WORK ENVIRONMENT Capacity to work indoors in an office, laboratory, and/or manufacturing environment. Ability to work in a stationary position for prolonged periods of time. Capability to lift objects or equipment weighing up to 40 pounds with or without reasonable accommodation. Physical aptitude to use basic hand tools in a laboratory and/or manufacturing environment. Ability to travel and/or attend meetings locally for trainings. MINIMUM REQUIREMENTS 2 Year technical degree or equivalent prior quality experience in a production environment working with multiple products/product lines. Available to work first shift with occasional overtime on evenings/weekends if needed. Intermediate computer and math skills including ability to use Excel and Microsoft Teams. Ability to evaluate requirements, understand technical documents, and keep thorough, organized records. Familiarity with reading part prints and detailed specification review. Ability to use hand tools and measuring devices such as calipers, micrometers, height gauges, surface roughness meters, Go/no-go gauges, pin gauges, comparators, borescopes, sight pipes, etc... Communicate effectively. Ability to perform multiple tasks while adhering to procedural guidelines with minimal supervision. Provia, Syteline, and Excel spreadsheets experience in a work environment a plus. Prior ISO Class 5 clean room experience a plus. Experience with Vision Systems, CMMs, Comparators, borescopes or Sight Pipes a plus. For internal use only: Quality001