Quality engineer jobs in Kentucky - 461 jobs

Our pharmaceutical client is looking for a hands-on Senior Manufacturing Engineer to lead new equipment and process improvement initiatives. You will be at the forefront and expert of designing and procuring new manufacturing equipment. If you thrive wokring in a fast-paced, highly collaborative environments, this role may be the one for you! RESPONSIBILITIES Lead efforts to monitor and optimize the performance of manufacturing equipment ensuring compliance with CGMP standards. Troubleshoot and resolve complex issues to minimize production downtime. Identify and implement opportunities for continuous improvement through upgrades, process modification, or alternative solutions. Lead in the development and implementation of procedural or automation improvement changes. Lead lean manufacturing initiatives, six sigma projects, and other process optimization efforts to improve productivity, quality, and cost efficiency. Assist with new product / equipment design reviews, process development and commercialization activities including training and development of manufacturing staff on operation and process. Serve as a technical point of contact for client and contract services. Develop and maintain measurement systems to visualize manufacturing key performance indicators (KPIs). Use data analytics tools and techniques to analyze equipment performance, identify trends, and recommend corrective action and process improvements Assist with manufacturing equipment-related deviations and root cause analysis Support the development and execution of Corrective and Preventive Actions (CAPA) and Change Controls to address root causes of equipment failures and performance issues. Support equipment Installation, Operation, Performance Qualification (IOPQ) activities. Experience supporting client and regulatory audits as well as responding to action items. Provide SME input on equipment qualification processes, ensuring fit for commercial manufacturing use, compliance with FDA and other regulatory requirements. QUALIFICATIONS Bachelor's degree in Engineering or related field and/or equivalent experience 5+ years of manufacturing with relevant experience Proven track record of successfully implementing improvement initiatives in a pharmaceutical manufacturing environment. Technical writing experience such as: SOPs, Maintenance PMs, user requirement specs, vendor requests for proposal

We are seeking a skilled Process Engineer who will be responsible for developing process-engineering capabilities and driving efficiency in our clients Louisville, KY manufacturing location. The successful candidate will be able to design and improve production processes in order to maintain efficiency, reduce cost, improve sustainability and maximize profitability. Responsibilities: Provide engineering support for Technical Services, Production, Graphics Engineering, Project Management, Quality Assurance and our Customers. Develop, configure and optimize print and converting processes from ideation through post-delivery application by our clients customers. Continuously evaluating and improving manufacturing methods, product design, material use and yield, tooling and production equipment capabilities, and quality control standards. Uses fact-based analysis to identify gaps and develop corrective and preventative actions to address. Responsible for the timely implementation of counter measures. Continuous analysis for the optimization of utilization of work force, workspace, and equipment. Identifies and implements improvement projects and/or general improvement projects applying Lean methodologies and tools. Coordinates and directs investigations in new processes, materials and other related technologies and provides training for operations as required. Develops and implements process control methodologies and establishes robust, repeatable, and reproducible process parameters. Provides technical assistance and expertise to resolve production problems, implements corrective action and trains operators as needed. Documents best practices through the development of single-point lessons, videos, and other training materials. Maintains process documentation, reviews processing methods, and interfaces with production personnel during process implementation Represents Operations on New Product Development teams, ensuring new products are brought to market capable of being manufactured to accepted specifications. Actively participates in daily Gemba walks, War Room, and other site meetings as required. Qualifications: Bachelor's Degree in Engineering REQUIRED: Experience in graphics, flexographic, rotogravure, or lithographic printing a strong preference, 4+ years of experience as a process engineer or manufacturing engineer in a printing, manufacturing, or packaging environment Experience with validation, installation, troubleshooting, and setup of processes, layouts and equipment Working knowledge of process engineering software packages Experience leading technical resources to successfully maintain production line equipment to achieve high levels of productivity

Delta does not provide immigration-related sponsorship for this role. do not apply for this role if you will need delta immigration sponsorship now or in the future. This includes direct company sponsorship, entry of Delta as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H-1 B, OPT, STEM OPT, CPT, TN, J-1, etc.). Delta Research an Aerospace company is an AS9100 and ISO9001 registered facility which manufactures Gear Products, Prototype/ Production, and Transmission Builds. In addition, we provide contract gear and CMM inspection services. We are also a NADCAP approved non-destructive testing facility and currently provide Magnetic Particle Inspection (MPI) and Nital Etch. This position is for 1st Shift 6:00 a.m. - 2:30 p.m. Tasks: * CMM Inspection - Support the Quality and Manufacturing departments with 1st Piece Inspection, * In-Process Inspection and Final Inspection of finished parts. * Use of manual handheld inspection tools such as micrometers, gages and other inspection equipment while CMM is running longer cycles times. * Set-up next job(s) in line while CMM is checking parts. * Perform layout inspections, first piece approvals, in-process inspections, and other aspects of inspection through-out the manufacturing process. * Other quality related duties as assigned. Qualifications: * Understanding of GD&T required * Prior CMM Operator Experience * CMM Programming experience using Open DMIS or similar preferred * Experience in a job shop or a manufacturing environment. * Knowledge of Inspection tools and best practices. * Positive, can do, attitude with great attendance. Delta Gear and Delta Research are manufacturing facilities that produce Prototype, Development and Production gearing for the Aerospace, Defense and Electric Vehicle markets. All the Delta Family of Companies are Equal Opportunity Employers without regard to race, religion, color, national origin, age, sex, disability, or veteran status. The Delta Family of Companies offer competitive compensation packages, excellent Health Insurance, Prescription Drug Coverage, Dental, 401(k), and Vacation. Delta offers a clean, safe, state of the art, work environment. We also offer training and room for advancement. Applicants must be U.S. Citizens or have permanent Resident Status due to our ITAR business restrictions. Apply online today at: **************************

Salary: $90,000 - 120,000/year We are seeking an experienced and driven Quality Manager to lead our quality assurance and control efforts in a dynamic manufacturing environment. This individual will be responsible for overseeing all aspects of the quality management system (QMS) to ensure our products meet or exceed customer and regulatory requirements. The ideal candidate will bring a proactive approach to problem-solving, continuous improvement, and cross-functional collaboration.Responsibilities Develop, implement, and maintain the company's QMS in compliance with ISO 9001 or other applicable standards. Ensure documentation and processes are up-to-date, audited, and effectively deployed throughout the organization. Lead internal and external quality audits, including preparation, execution, and corrective action follow-up. Supervise and support the quality control team to ensure in-process and final inspections are carried out effectively. Review and analyze production data, quality metrics, and defect trends to identify and address root causes. Develop and enforce product quality standards, procedures, and test methods. Evaluate and manage supplier performance, including quality audits, corrective actions, and incoming inspections. Establish quality requirements and inspection protocols for incoming materials and outsourced components. Address customer complaints and returns (RMA), ensuring timely root cause analysis and corrective/preventive actions (CAPA). Serve as the primary contact for customer quality-related issues and audits. Ensure compliance with industry-specific standards and regulatory requirements (e.g., ISO, AS9100, IATF 16949, GMP, etc.). Requirements Bachelor's degree in Engineering, Quality, Industrial Technology, or a related field. 5+ years of quality experience in a manufacturing environment. In-depth knowledge of quality systems, methodologies, and tools. Familiarity with ISO 9001 and/or other industry-specific standards. Proven experience managing audits and leading CAPA investigations.

Employee Type: Full time Job Type: Quality Job Posting Title: Quality Tech I About Us: TreeHouse Foods (NYSE: THS) is a leading manufacturer of private label packaged foods and beverages, operating a network of over 20 production facilities and several corporate offices across the United States and Canada. At TreeHouse Foods, our commitment to excellence extends beyond our products and revolves around our people. We are investing in talent and creating a performance-based culture where employees can do their best work and develop their careers, directly impacting our mission to make high quality, affordable food for our customers, communities, and families. We hope you will consider joining the team and being part of our future. Named one of America's Best Large Employers by Forbes Magazine, we are proud to live by a strong set of values and strive to "Engage and Delight - One Customer at a Time." Guided by our values-Own It, Commit to Excellence, Be Agile, Speak Up, and Better Together. We are a diverse team driven by integrity, accountability, and a commitment to exceptional results. We embrace change, prioritize continuous learning, and foster collaboration, transparency, and healthy debate. Together, we set each other up for success to achieve enterprise-wide goals. What You Gain: Competitive compensation and benefits program! Enrollment in our wellness and employee assistance programs! Paid holidays, vacation, and other competitive paid time off opportunities! An inclusive working environment where you can build meaningful work relationships with a diverse group of people Leaders who are invested in supporting your career growth. Opportunities to be recognized for outstanding contributions to your team through our employee recognition programs. Job Description: About the Role: The Quality Tech I role at the Princeton location is responsible for the monitoring of all process inputs including raw ingredients, packaging materials, and documentation according to safety, food safety and quality systems and processes to support the achievement of the site's business goals and objectives. You'll add value to this role by performing various functions including, but not limited to: Completing documentation in an efficient way while ensuring all information is correct. Performing facility/work area housekeeping duties in accordance with Good Manufacturing Practices and company policies and procedures Following work instructions and processes to ensure food safety and quality Being responsible for recognizing and reporting people safety, food safety, and/or quality issues Important Details: This is a 1st shift full-time permanent role, with has rotating days off. Hours are subject to change to meet business needs. 1st Shift: 6:45 am - 3 pm About You: You'll fit right in if you have: Demonstrated experience following instructions/process documents and providing effective communication, both verbal and written Experience in a manufacturing environment - food manufacturing a plus The ability to work overtime and weekends Your TreeHouse Foods Career is Just a Click Away! Click on the “Apply” button or go directly to ****************************** to let us know you're ready to join our team! At TreeHouse Foods, we embrace diversity and inclusion for innovation and growth. We are committed to building inclusive teams and an equitable workplace for our employees to bring their true selves to work to help us “Engage and Delight - One Customer at a Time”. TreeHouse Foods is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact disability-accommodations@treehousefoods.com TreeHouse Use Only: #IND1

We are THG, a global ecommerce group on a mission to be the global online leader in beauty and sports nutrition. Our portfolio of leading retailers and brands such as LOOKFANTASTIC, Myprotein, ESPA, Perricone MD, and Cult Beauty form our two core businesses: THG Beauty and THG Nutrition. With us, you'll go further, faster. What are you waiting for? Job Title: Food Safety & Quality Manager Company: THG Nutrition Location: THG Manufacturing, 1350 Cedar Grove Road, Shepherdsville, KY 40165, USA About THG Nutrition & Wellness: THG Nutrition & Wellness is home to some of the most loved and trusted names in wellbeing and nutrition, including Myprotein, the world's largest online sports nutrition brand, alongside its family of brands, Myvegan, Myvitamins, and MP Activewear. We aspire to be the world's most empowering health movement, encouraging everyone to lead healthier, more active lives. Our brands and people are dedicated to breaking boundaries, empowering individuals, and making a positive impact. We challenge conventions, are a force for good, and remain authentic in everything we do. These values drive us daily. Why be a Food Safety & Quality Manager at THG? As a Food Safety & Quality Manager at THG Manufacturing, you will play a pivotal role in ensuring the highest standards of food safety and quality, driving continuous improvement across the site. You'll be at the forefront of technical innovation, working with cross-functional teams, and leading projects that directly impact the efficiency and success of our operations. With ample opportunities for career progression and professional development, you'll be empowered to make significant contributions to both the company and your career. As a Food Safety & Quality Manager, you'll: Lead the site-wide technical functions, serving as the subject matter expert for food safety and quality. Manage and improve the Quality Management System (QMS) and maintain site BRC accreditation. Provide guidance on equipment suitability, hygienic design, and validation of cleaning methods. Drive continuous improvement initiatives to reduce waste, improve quality metrics, and enhance site performance. Oversee internal and external laboratory testing and ensure compliance with audit schedules. Manage and mentor the quality team, fostering a high-performance culture focused on quality, cost, and delivery. What skills and experience do I need for this role? A minimum of 3 years' experience in a quality/technical role within the food and/or drinks industry. Minimum 2 Years in a Management role HACCP Level 3 certification and a Food Hygiene Certificate. Experience with microbiology/laboratory testing, including creating testing suites, interpreting, and validating results. Strong leadership and communication skills, with the ability to engage and influence at all levels. Demonstrable experience in driving continuous improvement and managing quality projects. Proficiency with industry-standard systems/software and a methodical, results-oriented approach to work. THG is proud to be a Disability Confident Committed employer. If you are invited to interview, please let us know if there are any reasonable adjustments we can make to the recruitment process that will enable you to perform to the best of your ability. THG is committed to creating a diverse & inclusive environment and hence welcomes applications from all sections of the community. Because of the high volumes of applications our opportunities attract, it sometimes takes us time to review and consider them all. We endeavour to respond to every application we receive within 14 days. If you haven't heard from us within that time frame or should you have any specific questions about this or other applications for positions at THG please contact one of our Talent team to discuss further.

At GE Appliances, a Haier company, we come together to make "good things, for life." As the fastest-growing appliance company in the U.S., we're powered by creators, thinkers and makers who believe that anything is possible and that there's always a better way. We believe in the power of our people and in giving them the freedom to explore, discover and build good things, together. The GE Appliances philosophy, backed by three simple commitments defines the way we work, invent, create, do business, and serve our communities: _we come together_ , _we always look for a better way_ , and _we create possibilities_ . Interested in joining us on our journey? As a Senior Advanced Quality Engineer, you will play a critical role in launching new products and processes into manufacturing with world-class quality. You'll lead quality strategy for New Product Introductions (NPI), partnering closely with Product Design, Advanced Manufacturing Engineering, and Plant Quality to ensure new equipment, parts, and processes are production-ready, sustainable, and optimized from day one. This role blends strategic leadership and hands-on technical execution, with a strong focus on reducing Cost of Quality (COQ), mitigating risk, and embedding quality early in the design and manufacturing lifecycle. **Position** Senior Advanced Quality Engineer **Location** USA, Louisville, KY **How You'll Create Possibilities** **New Equipment & Process Qualification** + Own qualification and launch readiness for all new manufacturing equipment supporting the Home Laundry product line. + Develop and execute robust equipment qualification plans in collaboration with AME and equipment suppliers. + Travel to supplier and manufacturing sites to support planning meetings, equipment runoffs, and major production runs; present qualification results to senior leadership for approval prior to shipment. + Lead dimensional analysis reviews and align cross-functional teams on corrective actions and next steps. + Execute drive/strip/torque studies to validate capable joint designs. **Gaging, Measurement & Metrology** + Lead gage development for all production gages, following GE Appliances' gage specification and buy-off process. + Facilitate gage kickoff meetings with AMEs, Plant Quality, and Design Engineering. + Perform independent measurement activities as needed (CMM, scanning, calipers), leveraging metrology resources where available. + Interpret and apply MBD/GD&T and linear dimension drawings to ensure quality plans meet design intent. **NPI & PPAP Ownership** + Own PPAP activities for newly introduced in-house manufactured parts, assemblies, and processes. + Lead qualification of in-house equipment and processes with minimal direction. + Ensure all quality documentation and launch criteria are met prior to production release. **Risk Management & Continuous Improvement** + Lead cross-functional PFMEAs to identify and mitigate risks associated with new parts and processes. + Drive Cost of Quality (COQ) improvements across scrap, yield, concessions, damage, and service. + Develop traceability solutions from raw material through finished product, incorporating digital footprints and poka-yoke solutions where possible. + Apply GE Appliances' 9-step quality integration process and actively participate in drawing reviews. **Cross-Functional Leadership & Handoff** + Serve as the quality lead for turnkey launches, ensuring the factory is prepared to take full ownership post-launch. + Balance communication between Product Design and Manufacturing to minimize surprises and support world-class manufacturing outcomes. + Partner with Plant Quality and Operations to develop standard work, job instructions, and QMS documentation (MCPs, FRMs, MCIs) that meet or exceed ISO requirements. + Provide technical leadership and mentorship across engineering, quality, and operations teams. **CIB Site C-Change Support** + Apply the same NPI quality leadership and execution responsibilities to C-Change and PCTO initiatives at the CIB site. **What You'll Bring to Our Team** **Requirements:** + Bachelor of Science Degree in Engineering or related discipline OR equivalent 5 years' hands on experience in manufacturing quality disciplines + 5+ years of experience with manufacturing quality/NPI quality projects and process improvement **Preferred:** + Prior GE Appliances Laundry (AP1) experience, including familiarity with products, processes, and key stakeholders. + Strong data analysis and problem-solving skills in high-volume, short-cycle manufacturing environments. + Proven success leading cross-functional teams across engineering, operations, quality, and skilled trades. + Experience driving Lean and continuous improvement initiatives. + Six Sigma Green Belt or higher; proficiency using Minitab. + Advanced knowledge of GD&T, coordinate measurement, and metrology systems (CMM, 3D scanning); experience with PolyWorks preferred. + Proficiency with Excel, PowerPoint, Word, AutoCAD, and related engineering tools. + Confident communicator who can influence outcomes at all organizational levels. **Working Environment:** + Primary location: Louisville, KY; approximately **25% travel** to supplier and manufacturing sites (travel expenses covered). + Standard 1st-shift schedule with occasional support during off-shifts or weekends. + High-volume manufacturing environment requiring frequent walking and use of PPE. + Ability to lift up to 30 pounds and work around industrial equipment. **Our Culture** Our work is centered on our People and Culture as reflected in our Zero Distance philosophy and we recognize the importance of reaffirming our commitment to inclusion and diversity (I&D). This underscores our commitment to fostering an environment where every individual feels valued, connected, and empowered to contribute, while positioning our organization to adapt seamlessly to the evolving needs of our workforce and communities. This reflects our dedication to creating solutions that: Empower colleagues by fostering an environment where all voices are heard, valued, and encouraged to contribute. Strengthen communities where we live and work. Reinforce a culture of belonging, purpose, and engagement. Reflect the diversity of the communities we serve through our workforce, products, and practices. By further embedding Zero Distance into our People and Culture framework, we will continue to build a deeply connected organization. We are cultivating a culture of engagement, belonging, and connection, because while attracting new talent remains a priority, retention is a cornerstone of our strategy. GE Appliances is a trust-based organization. It is important we offer our employees the flexibility they need to do their best work while balancing the needs of the business and individuals. When you join GE Appliances, you will have the opportunity to work with your leader to create a flexible work arrangement that balances the needs of the individual, team, and organization. GE Appliances is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Appliances participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S _If you are an individual with a disability and need assistance or an accommodation to use our website or to apply, please send an e-mail_ _to *******************************_

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Plant Quality TechnicianResponsible for executing corporate and plant specific Food Safety, Quality and Laboratory requirements. The QA Technician reports to QA Manager. In the absence of the Quality Assurance Technician, the QA Manager or designate will assume the job duties. Essential Functions Ensure all parameters of food safety and quality are being adhered to and maintained throughout the facility. Assist with batching chemicals/ingredients for production. Calibrate lab and line equipment for accurate results. Collect in-process and finished product samples. Conduct standardized qualitative and quantitative testing to ensure it meets specifications. Perform aseptic testing for microbial contamination. Follow protocols for documenting testing results. Recognize deficiencies and initiate proper follow-up. Identify and isolate product that does not meet standards. Aid in troubleshooting deficiencies and non-conformances. Review food safety and quality records. Actively participate in plant teams (HACCP, Safety, etc.) Conduct other duties as assigned by management. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Must read, write and communicate in English. Must be able to work 12 hour shift (days or nights) on a rotating schedule Must follow GMP Policy - wear company issued shirt, hat, safety glasses, earplugs and hairnet in production areas. Able to lift up to 50 lbs. Able to work under pressure in a very fast paced environment Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree Certification/License: Required: N/A Preferred: HACCP Foreign Language Required: Full Professional Proficiency Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Commonwealth Rolled Products is a leading manufacturer of Aluminum rolled products for the Automotive, Commercial, and Industrial markets. The Company operates its production facility in Lewisport, KY with the support of an Automotive Innovation Center for R&D, Sales and Field Service in Madison Heights (DET), and Inside Sales in the Cleveland, OH area. Our Innovation Center is seeking to add a talented Process and Product Quality (PPQ) Engineer, to its team in Lewisport, KY. The purpose of this role is to hold, improve and transfer knowledge of processes and quality, responsible for process improvement & assurance, support product implementation, define and start up new investments and processes. The key responsibility is to develop and implement all process and quality settings to ensure a robust process that delivers right first time quality. Responsibilities Include: Actively participate in maintaining a zero incident safety culture Live and champion the Commonwealth Rolled Products core values; Safety, Integrity, Customer Focus, Ownership, Excellence, and Teamwork Drives the pursuit of a perfect process within their area but not letting perfect delay better. A perfect process produces world classes quality both efficiently and profitably. Responsible for the definition of all process settings which must be used to ensure stable and robust quality in efficient processes. Identify and lead capability improvement projects. Lead major quality improvement projects taking into account safety, costs and environmental constraints, as well as the effects on subsequent installations. Support quality and efficiency improvement projects from other departments (production, technical services, six sigma). Initiate and verify process changes and validate all process changes within primary assigned installation following MOC and change management. Assist production, when necessary, to perform root cause analysis or trouble shooting in a structured way to solve internal and external non conformities. Accountable for implementation of corrective actions in relevant processes resulting from claims and non-conformities. Partner with production and maintenance in operational area. Manage process settings through several hundreds of parameters in department to ensure stable and capable processes. Responsible for the setup of a system of process control of all relevant sub processes to ensure stable performance in time. Provide second line technical support to several customers, when installation is involved. Takes initiative in continuous learning and development within functional area. Responsible to deliver the input for R&D developments on the industrialization status. Apply SPC methodology to critical inputs and outputs. Provide feedback and coaching to Technicians on operating processes and quality tool utilization. Maintain and ensure compliance with inter-departmental quality contracts and specifications. Key Deliverables Products and materials General metallurgical knowledge about the products produced in the plant Detailed knowledge on thermo-mechanical & physical processing for assigned installations. Understanding of quality assurance and systems New product implementation Support Product Technology or to the R&D implementation department to ensure fast and robust introduction of new specifications or products Checks and refreshes the installation bible(s) and capabilities Investments Start up and commissioning support of new instillations and processes Detects the need for new investments or processes to improve quality or robustness Defines process requirements, prepares and follows up the startup of, and verifies results from new investments or processes Assigned area systems knowledge: Determined based on area of focus Specific controls systems Automation, mechanical and electrical specialties for area Required Qualifications: 4-year engineering degree required. 3-5 years relevant experience required. Has a profound knowledge of all processes of assigned installation - Mechanical & hydraulics, Chemical, Physical, Electrical & controls, Measurement systems, IT platforms (level 1- 3), and Thermo-mechanical processing capabilities. Quality assurance and/or quality systems experience Preferred Qualifications Continuous line experience Six sigma green belt or black belt Knowledge and demonstrated use of Quality tools; i.e. 8D, PPS, DMAIC, PDCA, A3, 5S, Value Stream and Cause Mapping, Visual Management, etc. Commonwealth Rolled Products is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to their race, religion, color, sex, pregnancy or pregnancy-related conditions, sexual orientation, gender identity or expression, age (forty and over), national origin, disability (as defined by applicable law), veteran's status, genetic information, marital status, or any other status or characteristic protected by applicable law. Our HR team will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.

Commonwealth Rolled Products is a leading manufacturer of Aluminum rolled products for the Automotive, Commercial, and Industrial markets. The Company operates its production facility in Lewisport, KY with the support of an Automotive Innovation Center for R&D, Sales and Field Service in Madison Heights (DET), and Inside Sales in the Cleveland, OH area. Our Innovation Center is seeking to add a talented Process and Product Quality (PPQ) Engineer, to its team in Lewisport, KY. The purpose of this role is to hold, improve and transfer knowledge of processes and quality, responsible for process improvement & assurance, support product implementation, define and start up new investments and processes. The key responsibility is to develop and implement all process and quality settings to ensure a robust process that delivers right first time quality. Responsibilities Include: * Actively participate in maintaining a zero incident safety culture * Live and champion the Commonwealth Rolled Products core values; Safety, Integrity, Customer Focus, Ownership, Excellence, and Teamwork * Drives the pursuit of a perfect process within their area but not letting perfect delay better. A perfect process produces world classes quality both efficiently and profitably. * Responsible for the definition of all process settings which must be used to ensure stable and robust quality in efficient processes. * Identify and lead capability improvement projects. * Lead major quality improvement projects taking into account safety, costs and environmental constraints, as well as the effects on subsequent installations. * Support quality and efficiency improvement projects from other departments (production, technical services, six sigma). * Initiate and verify process changes and validate all process changes within primary assigned installation following MOC and change management. * Assist production, when necessary, to perform root cause analysis or trouble shooting in a structured way to solve internal and external non conformities. * Accountable for implementation of corrective actions in relevant processes resulting from claims and non-conformities. * Partner with production and maintenance in operational area. * Manage process settings through several hundreds of parameters in department to ensure stable and capable processes. * Responsible for the setup of a system of process control of all relevant sub processes to ensure stable performance in time. * Provide second line technical support to several customers, when installation is involved. * Takes initiative in continuous learning and development within functional area. * Responsible to deliver the input for R&D developments on the industrialization status. * Apply SPC methodology to critical inputs and outputs. * Provide feedback and coaching to Technicians on operating processes and quality tool utilization. * Maintain and ensure compliance with inter-departmental quality contracts and specifications. Key Deliverables * Products and materials * General metallurgical knowledge about the products produced in the plant * Detailed knowledge on thermo-mechanical & physical processing for assigned installations. * Understanding of quality assurance and systems * New product implementation * Support Product Technology or to the R&D implementation department to ensure fast and robust introduction of new specifications or products * Checks and refreshes the installation bible(s) and capabilities * Investments * Start up and commissioning support of new instillations and processes * Detects the need for new investments or processes to improve quality or robustness * Defines process requirements, prepares and follows up the startup of, and verifies results from new investments or processes Assigned area systems knowledge: * Determined based on area of focus * Specific controls systems * Automation, mechanical and electrical specialties for area Required Qualifications: * 4-year engineering degree required. * 3-5 years relevant experience required. * Has a profound knowledge of all processes of assigned installation - Mechanical & hydraulics, Chemical, Physical, Electrical & controls, Measurement systems, IT platforms (level 1- 3), and Thermo-mechanical processing capabilities. * Quality assurance and/or quality systems experience Preferred Qualifications * Continuous line experience * Six sigma green belt or black belt * Knowledge and demonstrated use of Quality tools; i.e. 8D, PPS, DMAIC, PDCA, A3, 5S, Value Stream and Cause Mapping, Visual Management, etc. Commonwealth Rolled Products is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to their race, religion, color, sex, pregnancy or pregnancy-related conditions, sexual orientation, gender identity or expression, age (forty and over), national origin, disability (as defined by applicable law), veteran's status, genetic information, marital status, or any other status or characteristic protected by applicable law. Our HR team will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.

Job Description Standards Engineer Georgetown, Kentucky, United States On Site Contract | Full Time $45-$48 per hour Benefits Begin Day 1 Paid Time Off Paid Holidays Position Overview Reliance One, Inc. is seeking a Standards Engineer to support the development, maintenance, and implementation of facility and construction standards. This role plays a critical part in ensuring engineering standards align with industry best practices, regulatory requirements, and operational needs across multiple disciplines. Responsibilities Develop, review, and update facility and construction standards and specifications related to mechanical, electrical, civil, and architectural systems Collaborate with design, planning, manufacturing, and project teams to complete standards and specifications Monitor industry trends, global manufacturing trends, and current/past building issues; update standards as needed Manage multiple standards concurrently to ensure timely completion Provide guidance and interpretation of standards to internal engineering and project teams Document, track, and maintain records related to standards and specifications Required Qualifications Bachelor's degree in Engineering (Mechanical, Electrical, Industrial, or related field) 5-10 years of relevant engineering experience Proven experience in standards development, engineering implementation, or quality assurance (5+ years preferred) Strong knowledge of industry codes and standards, including ASTM, ASHRAE, IBC, NFPA, and related regulations Excellent analytical, communication, and organizational skills Ability to work collaboratively in a cross-functional team environment Intermediate proficiency with Microsoft Office Proficiency in AutoCAD, Bluebeam, or other PDF editing software Equal Employment Opportunity (EEO) Statement Reliance One, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability status, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionNow Hiring: Quality Control Technician (Concrete) People Plus is working with a local company to hire a Quality Control Technician with experience in concrete and construction. ACI (American Concrete Institute) certification is preferred, but strong hands-on experience will also be considered.Job Duties: Perform quality control testing and inspections on concrete Ensure materials and workmanship meet project and industry standards Document test results and report findings Work closely with production and field teams to maintain quality compliance Requirements: ACI certification preferred Experience in construction, especially concrete, strongly preferred Strong attention to detail and ability to follow specifications Reliable and safety-conscious Schedule & Pay: Monday-Friday, 7:00 AM-4:00 PM Starting pay: $20-$25+ per hour, depending on experience If you're looking for a stable schedule and competitive pay in a skilled construction role, apply today with People Plus to learn more!

Our Company PharMerica PharMerica is are seeking a seasoned Process Engineer with a strong background in pharmacy operations to drive continuous improvement and operational excellence across our pharmacy services. The ideal candidate will have 3-5 years of hands-on experience in process engineering. Experience working in a Long-Term Care (LTC) pharmacy environment is a plus. This role requires a strategic thinker with a passion for optimizing workflows, leveraging automation, and integrating emerging technologies such as Generative AI (GenAI), Large Language Models (LLMs), and Agentic AI. Remote opportunity. Applicants can live anywhere within the Continental USA. Travel: 25-50% Schedule: Monday - Friday, 8:00am - 5:00pm We offer: DailyPay Flexible schedules Competitive pay Shift differential Health, dental, vision and life insurance benefits Company paid STD and LTD Tuition Assistance Employee Discount Program 401k Paid-time off Tuition reimbursement Non-retail/Closed-door environment This position will be posted a minimum of 5 days Responsibilities Analyze existing pharmacy workflows and identify opportunities for standardization, process improvement, automation, and cost reduction Develop and maintain process maps, SOPs, and documentation to support operational consistency and compliance Lead Lean and Six Sigma initiatives to enhance efficiency, reduce waste, and improve service quality Collaborate with cross-functional teams including IT, operations, and clinical staff to implement innovative solutions Evaluate and integrate AI technologies (GenAI, LLMs, Agentic AI) to streamline decision-making, documentation, and customer service processes Monitor performance metrics and KPIs to assess the impact of process changes and drive data-informed decisions Support change management efforts and training programs to ensure successful adoption of new processes and technologies Qualifications Required Qualifications: Bachelor's degree in Engineering, Industrial Engineering, Pharmacy, or related field. 3-5 years of experience in process engineering, preferably in a pharmacy or healthcare setting. Proven expertise in Lean, Six Sigma, or other continuous improvement methodologies (Green Belt or higher preferred). Proficiency in process mapping tools (e.g., Visio, Lucidchart) and data analysis platforms (e.g., Excel, Power BI). Familiarity with automation technologies, GenAI, LLMs, and Agentic AI applications in operational settings. Strong analytical, problem-solving, and project management skills. Excellent communication and stakeholder engagement abilities. Preferred Qualifications: Experience in Long-Term Care (LTC) pharmacy operations. Exposure to regulatory compliance in pharmacy or healthcare environments. Experience with digital transformation initiatives or AI implementation in operational workflows. Key Competencies Strategic Thinking Innovation & Technology Adoption Process Optimization Cross-functional Collaboration Data-Driven Decision Making Change Management Travel Requirements: 25-50% travel About our Line of Business PharMerica, an affiliate of BrightSpring Health Services, delivers personalized pharmacy care through dedicated local teams, serving health care providers such as skilled nursing facilities, senior living communities, and hospitals. We also cater to individuals with behavioral needs, infusion therapy needs, seniors receiving in-home care, and patients with cancer. Operating long-term care, home infusion, and specialty pharmacies across the nation, we combine the personal touch of a neighborhood pharmacy with the resources of a national network. Our comprehensive solutions, backed by industry-leading technology and regulatory expertise, ensure accurate medication access, cost control, and compliance with best-in-class clinical standards. We are committed to enhancing resident health, reducing staff burdens, and supporting our clients' success. For more information, visit ******************* Follow us on Facebook, Twitter, and LinkedIn.

Working at Freudenberg: We will wow your world! Responsibilities: Lead and manage engineering projects from concept through implementation, ensuring timely delivery within budget constraints. Collaborate with cross-functional teams including design, production, quality assurance, and supply chain to ensure alignment on project requirements and goals. Perform detailed engineering analyses and simulations to validate designs and identify potential improvements or optimizations. Develop and maintain technical documentation including specifications, designs, and reports, ensuring compliance with industry standards and regulations. Mentor and provide guidance to junior engineers, fostering a collaborative and innovative engineering environment. Conduct feasibility studies and cost analyses to support decision-making processes. Stay current with industry trends, technologies, and best practices to drive continuous improvement in engineering processes. Support quality assurance initiatives by participating in root cause analysis and corrective action planning. Review and approve engineering designs and changes, ensuring adherence to technical standards and customer requirements. Participate in technical presentations and discussions with stakeholders to convey engineering concepts and project updates effectively. Qualifications: Bachelor's degree in Engineering (Mechanical, Electrical, Civil, etc.) or related field. 2+ years of relevant engineering experience (if Secondary education then 6+ yrs) in a manufacturing or technical environment. Proficient in engineering software and tools relevant to the specific engineering discipline (e.g., CAD, simulation software). Strong understanding of engineering principles, design methodologies, and regulatory compliance standards. Knowledge of project management methodologies and tools. The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Filtration Technologies LP

Fluidra's looking for a Quality Technician to join our team in Portland, TN. WHAT YOU WILL CONTRIBUTE The Quality Technician position at FLUIDRA will be responsible (under limited supervision) for maintaining quality standards by reviewing, analyzing and disposition of incoming and in-process materials resulting from customer returned products (RMA Analysis) and/or internally rejected materials (MRB) from any area within the Supply Chain process (Receiving, manufacturing, warehouse / handling and inspection areas), recording any quality results and maintaining quality records per company policy. The QC Inspector shall be experienced in writing NCMR's (non-conforming material reports through Oracle preferably) and documenting Corrective Actions Reports for Quality Engineers as well as utilizing emails to communicate these rejections/CARs to buyers and Supplier's when needed. This person will interact with material handlers on a day-to-day basis as well as with Receiving, Production Planning/Scheduling and Inventory Control teams to assure accurate and efficient processing/movement of non-conforming materials both physically and in the ERP system which will include acceptance and disposition into the appropriate sub-inventory location of products mainly via the FLUIDRA MRB Meetings. At the same time, this person will ensure both the RMA and MRB areas are appropriately organized and cleaned including accuracy of product as per Oracle inventory requirements. This person will also support the Receiving Inspection area/process with material handling support to QC Inspectors when needed as well as visual inspections when materials require either sample or 100% inspections. Other duties or changes may apply depending on company/business needs. Additionally, you will: Responsible for routinely conducting departmental Quality and/or Safety Audits Perform inspections for compliance with specifications using blueprints, drawings, inspection procedures, and prior knowledge of fabrication methods to evaluate if deficiencies are present in systems, structures, assemblies, or parts. Conduct in-process and final inspections at various checkpoints during maintenance activities. This includes installations or repairs of removed, disassembled, repaired, and assembled equipment; installation of structures, systems, and associated components; equipment to eliminate work hold-ups and rework; and to ensure conformance to specified requirements. Interpret inspection acceptance/rejection criteria to identify discrepancies and non-conformances. Assemble pertinent information and materials necessary to effectively accomplish planning, scheduling, inspections, and reporting of inspection results. Interpretation and judgment of the acceptance/rejection of an item is based on a review of the work against the written requirements. Judgment and interpretation is based on training and experience. Conduct training of lower level and same level inspection personnel by demonstrating the proper techniques for performing Quality Control inspection, interpreting inspection results, documenting inspection results, documenting non-conformances, and reviewing and closing out of completed work order tasks and associated inspection documentation. Evaluate the adequacy of specific programs used to train and test inspection, examination, and testing personnel. Develop, write, review, and approve inspection, examination, and testing procedures and evaluate the adequacy of such procedures to accomplish the inspection, examination, and test objectives. Conduct surveillances, observations and submit reports and recommendations. Analyze data from surveillances and observations of work activities and documentation to identify problems. Summarize data and major points and submit reports to management for review and action. Maintain files, charts, and status reports on progress of inspections and documentation. Assist in developing new procedural controls to address the quality control aspects of the Quality Management System (QMS) Perform independent oversight of S.R. Smith programs and processes through use of performance-based techniques. Responsible for written and verbal reporting of the conclusions of the assessments under the cognizance of a lead auditor. Routinely monitor plant and industry information to remain cognizant of assigned technical areas, and interface with line personnel, industry contacts, and regulatory agencies. Perform other duties as assigned. WHAT WE SEEK 5+ years of quality control inspection experience or equivalent combination of education and experience required to perform at this level. Must have experience both in MRB and RMA's areas including analysis and disposition of product as well as accurate segregation to prevent unintended use. The ability to interpret engineering specifications/drawings for disposition of products. Interpersonal skills, written and oral communication skills sufficient to organize, maintain and collaborate with other departments to accurately complete paperwork, understands documentation and effectively communicates with fellow employees for disposition of products. Extreme attention-to-detail, especially in the documentation of Non-Conforming product, Corrective Actions and disposition of materials. Proficiency in the use of Microsoft Excel and Microsoft Word as well as email's. Basic knowledge of measurement instruments (e.g., microscope, optical comparator, caliper, micrometer, pins gauge and gauge blocks). Good arithmetic skills are required. Must have good English written and verbal communication skills. Forklift driver certified a plus. EDUCATION • High school diploma or equivalent required WHAT WE OFFER An exciting opportunity to dive in and begin your career with a company that offers a competitive total rewards package that includes: 2 weeks of paid vacation 11 paid Holidays Full range of health benefits including medical, dental & vision, short & long-term disability 401(K) matching (100% of first 3% contributed, 50% of the next 2%) Health and wellness programs / gym reimbursement Educational assistance up to $7,000 per year Company sponsored FUN events! Generous product discounts WHO WE ARE Fluidra is a publicly listed company focused on developing innovative products, services and IoT solutions for the residential, commercial and wellness pool markets, globally. The company operates in over 45 countries, has over 7,000 employees and owns a portfolio of some of the industry's most recognized and trusted brands: Polaris , Jandy , CMP, S.R. Smith, and Zodiac . We also sell products under the Cover‐Pools , iAquaLink , Grand Effects , Dell and Nature2 names. With these combined resources we're able accelerate innovation in critical areas like energy-efficiency, robotics and the Internet of Things. Our focus is on creating the perfect pool and wellness experience responsibly. We take our mission to heart, and our employees embody these guiding principles in everything we do: passion for success, honesty & trust, customer collaboration, teamwork and inclusion, learn and adapt, excellence and innovation. Don't meet every single requirement listed? At Fluidra, we thrive on building an inclusive workspace, so if you are excited about this role and your past experience doesn't align perfectly, we encourage you to apply anyways! You may be just the right candidate for this role or another role in the organization. Fluidra is proud to be an equal opportunity employer. Fluidra recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, or any legally protected characteristic. #zip #LI-MG1

Holley, a leader in automotive aftermarket products, has an immediate opening for a 1st Shift Quality Technician at our Distribution Location in Bowling Green, KY. The Quality Tech is responsible for investigating internal/external quality issues and concerns. Starting pay is $17.78 with hourly pay progression. Summary of Job Duties: Supports all Operations Manager and Team Leader requests for support for quality issues or concerns, investigating and verifying quality-related issues on the production floor. Ensures that all nonconforming materials are placed in review board holdings areas and follow all tracking and disposition requirements. Writes corrective actions and leads the problem-solving teams regarding nonconforming materials. Works directly with Engineering to resolve product issues negatively impacting the operation that could result in customer complaints. Provides support to improve the Quality System through audits and other improvement activities. Professionally interacts with engineering, manufacturing, and purchasing departments, as well as vendors. Inspects and determines disposition of incoming production parts. Writes CMM programs and analyzes measurement data to communicate necessary changes to vendors and Engineering. Job Skills and Knowledge: Must be able to read and understand blueprints. Must be comfortable working in individual and team-oriented environments. Must be able to use basic and complex gauges. micrometers, calipers, go/no-go gages, etc. Work Experience: ASQ certification as a Certified Mechanical Inspector or Certified Quality Technician is strongly preferred. A background in Quality Control relating to the automotive industry is preferred. Setup experience is preferred. Summary of Minimum Qualifications: A high school diploma or GED is required; a two-year associate's degree or relevant college credit is preferred. CMM programming and operation experience is preferred but not required. Experience with PC-DMIS software is preferred but not required. M-F 6am-2:30pm with occasional overtime.

Support daily inspection demands on products in a manufacturing environment by applying testing criteria in accordance with applicable specifications or standards and evaluating results. Responsibilities * Organize and report test results. * Perform specialized inspections. * Apply testing criteria based on specifications or standards. * Conduct NDT inspections and visual testing. * Perform magnetic particle and liquid penetrant testing. * Carry out other job-related tasks as assigned. Essential Skills * Experience in quality assurance within a manufacturing environment, preferably in the defense industry. * NDT certification at Level 2, SNT-TC-1A standards. * Visual testing experience (VT). * Proficiency in liquid penetrant testing (PT). * Proficiency in magnetic particle testing (MT). * A 2-year degree in a relevant field. Additional Skills & Qualifications * Experience in quality inspection and assurance. * NDT inspection skills. * Strong organizational skills for reporting test results. Work Environment This role operates within a manufacturing warehouse environment, with a large client base in the defense sector. Employees benefit from ESOP and 100 percent employee-paid benefits. The role offers a 4/10 work schedule. All qualified candidates are encouraged to APPLY TODAY! Job Type & Location This is a Contract to Hire position based out of Louisville, KY. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Louisville,KY. Application Deadline This position is anticipated to close on Jan 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Who Are We? We build products and relationships that last a lifetime! No really, that's what we do. We are a successful family business with a long-term record of steady growth, and we are determined to accelerate our trajectory. Our diverse team members who speak 22 languages are passionate about their company and their co-workers. Check out our website at ******************** We Are Not: · Fancy - as manufacturers we believe practical, clean facilities are required to make quality products and retain the best team. · Transactional - we have long-term relationships with our team members and most valuable customers. · Satisfied - we celebrate achievement, then set our sights on new goals. Job Summary: Strong Hold is seeking a highly skilled and detail-oriented Quality Technician to join our team! This role will be onsite and responsible for ensuring that our products meet the highest quality and safety standards before they are shipped to our customers. In this role you will conduct inspections, analyze test data, and provide recommendations for improvement. This is a great opportunity for college students, recent graduates, or those interested in the field of Quality, to gain valuable experience in a fast-paced manufacturing environment. Essential Functions: Inspect products at various stages of the manufacturing process to ensure adherence to quality and safety standards. Use measurement tools and basic math to accurately measure and evaluate product dimensions and specifications. Maintain a high-level of visual awareness to detect any defects or inconsistencies in products. Identify quality inconsistencies and promptly report them to the appropriate department for corrective action. Develop and maintain company inspection records, including documentation of processes and procedures. Record, analyze, and draft quality reports on test data. Ensure that all test equipment is properly calibrated and functioning correctly. Collaborate with cross-functional teams to identify possible areas for improvement in quality processes. Monitor production processes to ensure that quality testing procedures do not hinder production timelines. Ability to work independently with minimal supervision while achieving productivity and quality goals. Capable of standing for long periods and perform repetitive tasks as required in a non-climate-controlled environment. Requirements Requirements Demonstrated high-level of visual awareness and attention to detail. Strong understanding of basic mathematical concepts is essential. Demonstrated ability to analyze and interpret technical information accurately. Excellent communication skills, both verbal and written. Proficient in MS Office, and Excel, particularly in drafting reports and collating data. Excellent organizational skills, with the ability to manage and prioritize multiple tasks effectively. Outstanding attendance is a must in this role. Highschool Diploma/GED Preferred Education & Experience: Some College. 1-2 years of experience as an inspection or quality technician. Previous experience working with measurement tools is preferred. Benefits: We value our team members and believe in providing competitive compensation and comprehensive benefits, including: Competitive wage with annual increases and a performance-based annual bonus. 401(k) retirement plan Health, dental, & vision, insurance coverage Company paid life, short- & long-term disability insurance coverage Paid time off for vacation, holidays, and personal days Shift Information: Monday through Thursday, 6:00am to 4:30pm

Ventek Solutions (Ventek) is a leading manufacturer specializing in engineered shape molded foam components, protective packaging, and multi-material assembly solutions. The organization helps customers address complex challenges in product protection, component light-weighting, insulation, and design simplification. Ventek's services span a variety of industries, including construction, automotive, electronics, medical, and more. Ventek Solutions leverages creative design, thoughtful engineering, and meticulous program management to deliver customized solutions. Ventek operates 8 plants in the US and Mexico with corporate headquarters in Charleston, SC. Position Summary We are seeking an experienced Quality Tech 1 - 3rd shift 10pm - 6:30 am Mon - Friday Join our dynamic team as a Quality Technique Specialist, where your expertise will play a critical role in ensuring our products and services meet the highest standards of excellence. As a Quality Technique Specialist, you will be at the forefront of implementing and refining quality assurance processes, driving continuous improvement, and ensuring compliance with industry regulations. **Key Responsibilities:** - Develop, implement, and maintain quality assurance protocols and procedures. - Conduct thorough inspections and tests to ensure product compliance with specifications and standards. - Analyze data to identify areas for improvement and recommend effective quality enhancements. - Collaborate with cross-functional teams to resolve quality-related issues and implement corrective actions. - Document COA's COC's as required - Must know which measurement and test equipment(M&TE) tools are appropriate for various task and how to assess tool accuracy and precision; understand the concept of standards traceability for M&TE> - Train and mentor team members on best quality practices and continuous improvement methodologies. **Qualifications:** - Proven experience in quality assurance or a similar role. - Strong understanding of quality control methodologies and tools. - Excellent analytical and problem-solving skills. - Effective communication skills, with the ability to collaborate with diverse teams. - Proficiency in using relevant software and tools for quality management. - Quality certification (e.g., Six Sigma, ISO) is a plus. **Benefits:** - Competitive salary and performance-based bonuses. - Comprehensive health, dental, and vision insurance. - Opportunities for professional development and growth. - Collaborative and innovative work environment. - Flexible working hours and a generous vacation policy. If you are passionate about quality techniques and are eager to contribute to a forward-thinking organization, we encourage you to apply for this exciting opportunity. Join us and be a part of a team that values quality and strives for excellence in everything we do. JOB CODE: 022148