Quality engineer jobs in Milwaukee, WI - 553 jobs

The Quality Technician ensures that products and processes meet established quality standards by conducting inspections, tests, and audits. This role involves collaborating with production, engineering, customer service, and sales teams in identifying quality issues, and assisting with implementing corrective actions to maintain compliance with company and regulatory requirements. This individual will report to the Quality Supervisor and be a strong partner to our operators and supervisors on the floor. This person will have to captivate and communicate with all departments to address issues, propose resolutions, and see through the quality vision for the company. They will also maintain proper reporting, documentation, and any other necessary routines for the department. Essential Duties and Responsibilities This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. Read and interpret blueprints, engineering drawings, and technical specifications to verify that products meet required standards. Use standard measurement tools and equipment (e.g., calipers, tape measures, micrometers, gauges) to check and document product dimensions. Perform visual and dimensional inspections on incoming materials, in-process production, and finished goods. Record inspection results accurately and communicate nonconformances to appropriate personnel. Support Shipping & Receiving by inspecting incoming and outgoing products when required. Maintain and organize quality logs, including Nonconforming Material (NCM) records, Returned Material Authorization (RMA) records, and scrap tracking logs. Assist in monitoring scrap trends and providing relevant inspection data to production. Track and maintain the calibration status of measuring tools and equipment. Participate in internal audits to verify compliance with established procedures, quality standards, and customer requirements. Assist with quality documentation activities such as PPAPs or first article inspections, when needed. Support training efforts by helping production employees understand quality standards and proper inspection methods. Participate in problem-solving activities to help identify root causes of quality issues and support corrective actions. Work independently to perform inspections, maintain logs, and resolve routine quality issues with limited on-site supervision. Communicate end-of-shift updates, nonconformances, and outstanding issues to the incoming shift and QC leadership. Coordinate with operators and supervisors to ensure quality standards are maintained throughout the shift. Provide flexible inspection support across multiple production departments as required. Maintain knowledge of quality standards and best practices through training and professional development. Perform other quality-related duties as assigned. Work in accordance with company policies, mission, and values at all times. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Strong attention to detail and commitment to customer experience. Possesses ability to use gauges such as calipers and micrometers to measure products. Able to read and understand Engineering drawings and blueprints. Effective communicator to various audiences using verbal and written skills. Education and/or Experience High school diploma or equivalent required. Associates or Bachelor's Degree or equivalent experience is a plus. 3 or more years working in a manufacturing operations environment. 1 or more years' experience working with quality assurance/control is preferred. Experience with Microsoft Office software such as Windows, Word, Excel, PowerPoint, Teams, Outlook. Experience with Global Shop Solutions ERP system is a plus. Schedule2nd shift: Monday - Thursday 2:45pm-12:45amBenefits Medical (Anthem) Dental (Anthem) Vision (Anthem) Life Insurance Supplemental Insurance 401k with matching Paid Holidays Paid Time Off Paid Parental Leave Incentive Plan Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Frequent: Seeing Hearing Standing, walking or mobility for long periods of time Lifting, pulling, or pushing up to 50 pounds without assistance Climbing, stooping, or kneeling Fingering, grasping, feeling, typing Activities are performed on a routine basis using personal protective equipment (PPE) such as glasses, shoes, and earplugs. At times, face shields, aprons, suits, and other PPE may be required. Employee will operate various hand tools, power hand tools and machine tools. Note: The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. It should not be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Work Environment Normal office and factory environment. Slight exposure to dust, noise, fumes, and oils is present. We are great people that make a great product! At Tanis Brush, we design and manufacture various industrial and utility brushes that help other businesses thrive. Our brushes are used for cleaning, sorting, painting, finishing and protecting equipment, machinery, parts and many other applications. Since 1987, Tanis has been known for our vast selection of brush products, resourceful specialty design, engineering capabilities, and exceptional customer service. Tanis Brush provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, ancestry, national origin, citizenship, sex or gender (including pregnancy, childbirth, and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, religion, age, disability, genetic information, service in the military, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Equal employment opportunity applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.

About AkzoNobel Since 1792, we've been supplying the innovative paints and coatings that help to color people's lives and protect what matters most. Our world class portfolio of brands - including Dulux, International, Sikkens and Interpon - is trusted by customers around the globe. We're active in more than 150 countries and use our expertise to sustain and enhance the fabric of everyday life. Because we believe every surface is an opportunity. It's what you'd expect from a pioneering and long-established paints company that's dedicated to providing sustainable solutions and preserving the best of what we have today - while creating an even better tomorrow. Let's paint the future together. For more information please visit ***************** 2024 Akzo Nobel N.V. All rights reserved. Job Purpose What is the primary purpose of this job? Describe in a paragraph of 5-6 lines why the job exists, main objectives and the need it fulfills. This position is responsible for analyzing and testing manufactured products and raw materials. Uses approved test methods and procedures to assure that products meet customer specifications prior to releasing to the Filling department. Consults with QC, Production, and RDI personnel on quality related problems. Evaluates test results and assists in the correction of Production and Filling related problems. This position in for 3rd shift Key Responsibilities * Describe the essential responsibilities of the job. Start each line with an action verb that best describes the responsibility. List the responsibilities by priority. Group per area. Include the outcome of the responsibility. Conducts tests including but not limited to viscosity, gloss, hardness, weight per gallon, non-volatile content, cleanliness, adhesion, and paint film properties. * Tests raw materials. * Writes up adjustments to batches that are outside of specification within approved ranges and guidelines. * Consults with QC and Production leadership, and RDI personnel to resolve batch performance issues. * Prepares pre-shipment samples for customer submission. * Participates in 5S and general housekeeping activities in the laboratory. Job Requirements Minimum Qualifications: High School diploma Good basic math and computer skills in MS Office applications Required to walk or stand majority of the shift. Ability to lift 50 lbs. Capable of wearing breathing apparatus and capable of passing a fit test. Preferred Qualifications: Two years of college Two years laboratory experience. Compensation & Benefits Compensation for this role $28.00/hour with a $1.50 shift differential for hours worked on 3rd shift 401K retirement savings with 6% company match Medical insurance with HSA Dental, Vision, Life, AD&D benefits Generous vacation, sick and holiday pay Progression (pay-for-skill) pay plans Short & Long term disability Paid Parental leave after 1 year Career growth opportunities Active Diversity & Inclusion Networks Employee referral bonus Employee appreciation days Competencies Accepting Direction Accepting Responsibility Acquiring Information At AkzoNobel we are highly committed to ensuring an inclusive and respectful workplace where all employees can be their best self. We strive to embrace diversity in a context of tolerance. Our talent acquisition process plays an integral part in this journey, as setting the foundations for a diverse environment. For this reason we train and educate on the implications of our Unconscious Bias in order for our TA and hiring managers to be mindful of them and take corrective actions when applicable. In our organization, all qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age or disability. Requisition ID: 51147 #LI-CH3

Full-time Description The Gund Company is looking for an Experienced Quality Technician to join our team of fun, driven professionals who love what we do! Starting Hourly Wage: $35+ About Us At The Gund Company, we manufacture innovative electrical insulation solutions and pride ourselves on our consultative, engineering approach. With 16 facilities worldwide and a reputation for outstanding customer service, we foster a growth-oriented environment where your ideas matter and your career can flourish. What You will do - Experienced Quality Technician Lead quality control activities, including inspection, release, and nonconformance root cause analysis for our products Execute and improve quality assurance (QA), quality control (QC), and continuous improvement (CI) processes Collaborate with facility, functional, and quality teams to drive process excellence Perform in-process, first article, PPAP, and customer-defined inspections Participate in customer-focused responsiveness to quality issues Work with peers to develop and implement systemic quality and process improvements Take on other exciting duties as assigned Requirements 2+ years of experience in an ISO9001 manufacturing or aviation/space/defense (AS9100) environment, required Associate degree or equivalent combination of education and experience, required (Bachelor's degree preferred) Strong computer skills (Word, Excel, PowerPoint) Experience with ERP systems for data entry and report analysis Project management skills or willingness to develop them Meticulous record-keeping and attention to detail Excellent communication and teamwork abilities Creative problem-solving and continuous improvement mindset Blueprint reading and measurement system expertise American Society for Quality certifications (CQT, CQA, Lean Six Sigma Green Belt) are a plus Why You will Love Working Here - Experienced Quality Technician Safe and healthy work environment Paid Time Off (PTO) and Paid Holidays Comprehensive, cost-effective benefits: Health, Dental, Vision, Life, and Disability 401(k) retirement savings with 50% employer match (up to 6% of contributions) ESOP: 30% employee-owned-shares awarded annually based on profitability, no out-of-pocket investment Opportunities for growth, learning, and making a difference every day Ready to Make an Impact?Join a company that values your contribution and invests in your future. Apply today to start your career with The Gund Company! The Gund Company is an Equal Opportunity Employer. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Created: 12012025 RJ FM

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. From the edges of space to the bottoms of the ocean, our materials are proven to perform - and so is our team. We're hiring high performers as proven as our products. Join us. ATI is currently looking for a Product Quality Engineer - Aerospace at our Cudahy, WI facility. The Product Quality Engineer is responsible for driving product and process quality across aerospace forging, machining, and heat treatment operations. This role is focused on improving Right-First-Time performance, reducing Cost of Poor Quality, and ensuring the safety and reliability of aerospace components. The PQE acts as the bridge between Quality, Manufacturing, and Process Engineering, leading problem-solving, RCCA, and continuous improvement initiatives to stabilize and optimize production processes. Oversee quality of assigned aerospace parts, ensuring requirements are accurately interpreted from prints, models, and specifications (incl. GD&T), and translated into robust manufacturing instructions. Lead structured RCCA/problem-solving (8D, 5-Whys, FMEA, Pareto, fishbone) to prevent recurrence of defects, stabilize processes, and drive measurable improvements. Improve Right-First-Time yield by optimizing forging and heat treat processes, machining instructions, and in-process controls. Champion APQP-style rigor (AS9145 mindset) for new and revised products: Process Flow, PFMEA, Control Plan, MSA, and process validation. Apply SPC and advanced statistical methods (DOE, regression, hypothesis testing) to identify and validate critical process/product characteristics. Partner with Forge Shop/Heat Treat, Die Design, Quality, Processing, Machining, and Supply Chain teams to resolve production issues and accelerate improvement projects and reduce COPQ. Use time management and project planning skills to introduce manufacturing process improvements, enhance inspection methods, and implement process controls to improve throughput and ensure product safety. Quality standards & compliance - Support the AS9100 Quality Management System, and participate in targeted internal/external audits and Nadcap interactions.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is currently seeking a Product Quality Engineer - Aerospace to join our facility located in Cudahy, WI. The Product Quality Engineer (PQE) will drive product and process quality across aerospace forging, machining, and heat treatment operations. This role focuses on improving Right-First-Time (RFT) performance, reducing Cost of Poor Quality (COPQ), and ensuring the safety and reliability of aerospace components. The PQE serves as a bridge between Quality, Manufacturing, and Process Engineering, leading RCCA and continuous improvement initiatives that stabilize and optimize production. Key Responsibilities Ensure product and process requirements are accurately interpreted from prints, models, and specifications (GD&T) and translated into robust manufacturing instructions. Lead structured RCCA/problem-solving (8D, 5-Whys, FMEA, Pareto, fishbone) to prevent defect recurrence and drive measurable improvement. Improve Right-First-Time yield by optimizing forging, machining, and heat treat processes and in-process controls. Champion APQP/AS9145 rigor through PFMEA, Control Plan, MSA, and process validation. Apply SPC and statistical methods (DOE, regression, hypothesis testing) to validate critical process characteristics. Collaborate cross-functionally with Forge, Heat Treat, Machining, Die Design, Quality, and Supply Chain teams to reduce COPQ. Support AS9100 compliance, internal audits, and Nadcap interactions.

7am to 3pm Monday through Friday$22-24/hour based on experience Experience programming in PCDMIS and activities regarding PPAP. Specifically looking for keywords of creating Process Flow Diagrams, Process FMEA, and Control Plans. Essential Duties and Responsibilities:• Inspection of production material including1st piece inspections, receiving inspections, process audits, etc...• Remove defective items from production with proper identification of the item and reason for removal.• Report defects to the appropriate manager.• Manage calibration system including setting up outside service calibrations and calibrate certain hand gages (calipers, micrometers, height gages.• Support new product development and continuous improvement by integrating quality tools into processes.• Qualify new or revised products using Production Part Approval Process (PPAP) and First Article Inspection Reporting (FAIR) following AIAG guidelines.• Communicate with customers (external and internal) and suppliers regarding quality of products or services.• Create and maintain quality documentation, processes, and reports.• CMM Programming (Micro Vu).• Understanding and support of Company policies and procedures.• Promote and advocate quality achievement and performance improvement across the organization. Education and/or Experience:• One-year certificate from college or technical school, three to six years related experience and/or training; or equivalent combination of education and experience.• Knowledgeable in the use of measuring tools such as but not limited to: tape measures, micrometers, calipers, height gage, bore gages, and optical comparameters. • Ability to proficiently read blue prints for machining, forming, and welding processes.• CMM and layout experience desired. • Knowledge on Gage Calibration• Background in Geometric Dimensioning and Tolerances (GD&T) and Statistical Process Control (SPC).• Proficient in using Microsoft Office and Microsoft Exchange.• Previous experience working with ERP systems.• Working knowledge of ISO 9001:2015 standard.• Ability to work independently.• Flexible and responsive with a strong teamwork orientation.• Strong orientation toward quality, safety and continuous improvement.• AQS Certified Quality Technician preferred QUALIFICATION REQUIREMENTS:• Must be at least 18 years of age or older.• High School diploma or GED required.• High knowledge and understanding of metal machining.• Ability to work with various types of metal machining constraints without guidance.• Ability to read and understand technical drawings and other shop drawing aids at a high level.• Good verbal and written communication skills.

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success -- so we give you unlimited access to everything you need to provide technical solutions on our Manufacturing Quality Team. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to support the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Year after year, our team continues to make significant breakthroughs in the industry. We're just getting started. To learn more about our story click HERE. Your Role on Our Team The Quality Technician II will be responsible for ensuring the quality of all products produced meet agreed upon standards and expectations. The Quality Technician II will demonstrate the ability to put people and process first at all times to ensure Milwaukee Tool's unwavering devotion to a robust quality culture. This position is the standard bearer for who we are and the obsession we have with being the market leader. A Quality Technician II is charged with overseeing the quality, safety, productivity, and training linked within their assigned team. The ability to effectively communicate to the team is crucial to the continued success and development of the personnel and equipment managed. Through resourcing of timely product inspections, and directing of plant quality technicians, the Quality Technician II position is tasked with the short- and long-term success of the Manufacturing Quality Team. Shift: 3rd Shift, Sunday-Thursday 11:00pm-7:00am You'll be DISRUPTIVE through these duties and responsibilities: Key contributor of the manufacturing quality assurance organization by performing daily audits of the manufacturing process to ensure all products and processes are abiding by the specifications and standards set by the leadership teams User of test lab equipment such as tensile/torsion testers, hardness testers, metallurgical equipment (cut/mount/polish, optical and stereo microscopes), and other various test equipment Operate CMM and VMM measuring machines and user of handheld devices such as calipers, micrometers, height/snap/pin gauges and other various devices to support metrology needs Initiate Quality System documentation, such as Inspections, Non-Conforming Material Reports (NCMR's), quality alerts Contribute to the creation of work instructions Complete dimensional inspections of incoming raw material Ability to navigate document repository web page to locate inspection reports, blueprints and other quality documents Participate in gage R&R studies as needed Mentor Quality Technician I personnel and provide guidance to manufacturing operators Effectively communicate across shifts and weekend work within internal teams and cross-functional teams Support Operator instruction/ training on new procedures or techniques Perform basic math; fraction to decimal conversion, arithmetic and units of measure conversion, and basic statistics Consciously abide by all safety policies and procedures to create a safe working environment Other duties as assigned The TOOLS you'll bring with you: High School or GED diploma 2+ years of previous quality experience or 5+ years of manufacturing experience Basic understanding of Microsoft Office Suite, Excel and Microsoft Outlook Excellent oral and written communication skills Ability to navigate technology such as computer, tablet and printer systems Ability to work independently and as part of a team Ability to read blueprints Problem solving abilities, interpersonal skills, and the ability to manage interruptions Proven hands-on skills and ability to follow detailed instructions is a huge plus Other TOOLS we prefer you to have: Understanding of metrology fundamentals, GD&T We provide these great perks and benefits: Robust health, dental and vision insurance plans Generous 401 (K) savings plan Education assistance On-site food and coffee service And many more, check out our benefits site HERE Milwaukee Tool is an equal opportunity employer.

Job Description Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. **Job title: **QA Tech **Location: **Sheboygan, WI About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: The Quality Technician performs a variety of tests to ensure units function according to specifications or to determine cause of unit failure, using test instruments: Reads test schedule, work orders, test manuals, performance specifications, and schematics to determine testing procedure and equipment to be used. Perform receiving, in-process, and final inspections per applicable prints and specifications. Responsibilities: Performs inspection of parts for conformance with engineering or other process specifications or instructions When applicable, use CMM (Coordinate Measuring Machine) Calibrate and verify accuracy on precision gages. Must follow gauging part check procedure. Identifying and monitoring production machine parameters. Monitoring and testing product/batch quality Needs working knowledge of GD&T and able to read part drawings. Utilizes performance, test, and inspection data to investigate causes for product nonconformance and field problems and plays an active role in problem resolution. Helps Identify areas of production/processes that can be improved upon. Qualifications: High School diploma or GED. 2+ years of experience in quality inspection experience in a factory environment Preferences: 3+ years of experience in quality in a manufacturing environment supporting industrial parts and product manufacturing Experience operating a CMM (Coordinate Measuring Machine), programming experience a plus. Good knowledge of precision measurement and test equipment Interpret engineering prints/specifications and geometric dimensioning & Tolerancing (GD&T) Knowledge of ISO Quality System requirements Competencies- Need to be self-starting and work independently with minimal supervision. Hazards are· cuts, burns, bruises and possible permanent injury; operator required to wear proper PPG. Regular exposure to heat, dirt, grease, and fumes. Regular exposure to noise levels exceeding 85 db (hearing protection required when exposure exceeds 85db). Travel & Work Arrangements/Requirements This position will be based fully onsite. What we Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

Under the direction of the Production Supervisor, the Shift-Based Process Engineer is a hands-on technical leader assigned to a specific production shift, responsible for maintaining stable, capable, and repeatable injection molding processes. This role works directly on the production floor, supporting mold startups, changeovers, troubleshooting, and continuous improvement activities during the assigned shift. The Process Engineer is the primary technical authority on shift, ensuring processes remain within validated scientific molding windows and that quality, scrap, downtime, and safety issues are addressed in real time. _________________________________________________________________________________________________________ Essential Duties & Responsibilities This position includes, but is not limited to, the following shift-specific responsibilities: Production & Process Ownership Serve as the on-shift technical owner for molding processes across assigned machines. Lead and support mold setups, startups, and changeovers during the assigned shift. Establish, validate, and sustain RJG/D3 scientific molding processes on the production floor. Ensure processes are running within defined windows and take immediate action when deviations occur. Troubleshoot molding, tooling, material, automation, and machine issues impacting quality or throughput. New Tooling & Process Validation Run and support new mold trials, tool samples, and ECN validations on the assigned shift. Develop practical, shift-ready setup sheets, startup instructions, and processing standards. Identify and escalate tooling, machine, or design concerns discovered during production runs. Communicate trial results and shift learnings clearly during shift handoffs and to Engineering leadership. Quality & Continuous Improvement Identify whether part quality issues are process-, tooling-, machine-, or material-related and lead corrective actions. Conduct DOE studies and capability improvements directly in production to improve CTQs. Drive scrap reduction, cycle time improvements, and process stability initiatives. Support and participate in root cause investigations for recurring shift-level issues. Interface with Quality on control plans, inspection methods, and capability concerns. Shift Team Support & Development Work side-by-side with Setup Technicians, Process Technicians, Operators, Maintenance, and Automation. Provide on-the-job training and mentoring in: RJG process control Scientific molding (D3) Practical troubleshooting and escalation criteria Act as the primary technical escalation point during the shift. Ensure strong communication during shift handoffs, including process status, risks, and actions required. Safety, 5S & Standards Support and enforce plant safety initiatives and safe setup practices. Maintain and enforce strong 5S and housekeeping standards within molding areas. Promote disciplined process control and adherence to documented standards. _________________________________________________________________________________________________________ What Success Looks Like on Shift: Stable processes maintained throughout the shift Faster, smoother startups and changeovers Reduced scrap, downtime, and unplanned adjustments Strong technical capability across shift personnel Clear, effective shift-to-shift communication and handoff _________________________________________________________________________________________________________ Minimum 10 years of hands-on injection molding experience in a production environment. Proven experience as a Process Engineer or Senior Process Engineer, working directly on molding machines. Strong background in RJG process control and scientific molding (D3). Deep working knowledge of molding machine controls and troubleshooting. Ability to read and understand tooling prints and mold construction concepts. Strong root cause analysis and problem-solving skills. Comfortable being the primary technical authority on a shift. Ability to communicate clearly across shifts and with Engineering, Quality, and Operations leadership. Willingness to work assigned shift and provide support during critical production events. Ability to travel between facilities or customer locations as required. Lean manufacturing and 5S experience preferred. Compensation details: 40-41 Hourly Wage PI1459c0ba4cda-31181-39458084

Quality Technician - 2nd or 3rd shift Location: Lake Geneva, WI Company: Medicoil About Medicoil: Medicoil specializes in precision coil solutions for medical and industrial applications. Join our team and be part of a company that values quality, innovation, and career growth. Position Overview: As a Quality Technician, you will inspect, verify, and document product quality to ensure compliance with industry standards. Reporting to the Quality Supervisor, you'll play a key role in maintaining our reputation for precision manufacturing. Key Responsibilities: Perform first-piece and final inspections Conduct statistical process control (SPC) and component layouts Operate and program testing equipment Analyze and troubleshoot inspection results Ensure compliance with quality standards and ISO 13485 requirements Maintain a clean, organized work area Qualifications: High school diploma, GED, or equivalent experience Basic mechanical aptitude and measurement tool knowledge Ability to read work instructions and customer blueprints (preferred) Manufacturing or quality experience is a plus Why Join Us? We offer a collaborative environment, growth opportunities, and the chance to work with cutting-edge technology. If you have a keen eye for detail and a passion for quality, apply today! Equal Opportunity Employer, including Veterans and Individuals with Disabilities.

About the Role: The Quality Technician plays a crucial role in ensuring that products meet the highest standards of quality and safety in the durable goods manufacturing industry. This position involves conducting inspections, tests, and evaluations of materials and products throughout the production process. The technician will collaborate closely with production teams to identify and resolve quality issues, ensuring that all products comply with industry regulations and company standards. By maintaining accurate records and documentation, the Quality Technician will contribute to continuous improvement initiatives aimed at enhancing product quality and operational efficiency. Ultimately, this role is vital in safeguarding the company's reputation and ensuring customer satisfaction through the delivery of high-quality products. Minimum Qualifications: High school diploma or equivalent. Experience in quality control or assurance within a manufacturing environment. Familiarity with quality inspection tools and techniques. Preferred Qualifications: Associate's degree in a related field. Certification in quality control or quality assurance (e.g., Six Sigma, ISO). Experience with statistical process control (SPC) methods. Responsibilities: Conduct regular inspections and tests on raw materials, in-process components, and finished products to ensure compliance with quality standards. Document inspection results and maintain accurate records of quality control activities. Collaborate with production teams to identify quality issues and implement corrective actions. Assist in the development and implementation of quality assurance procedures and protocols. Participate in training sessions to educate staff on quality standards and best practices. Skills: The required skills for this position include attention to detail, which is essential for accurately inspecting products and identifying defects. Strong analytical skills are necessary to interpret data from inspections and tests, allowing the technician to make informed decisions about product quality. Effective communication skills are vital for collaborating with production teams and conveying quality standards clearly. Additionally, proficiency in using quality control tools and software will enhance the technician's ability to document findings and track quality metrics. Preferred skills, such as knowledge of statistical process control, will further enable the technician to contribute to process improvements and maintain high-quality production standards.

Job Title: Quality Process Engineer Reports To: Quality Manager The Quality Process Engineer is responsible for developing, implementing, and maintaining quality assurance protocols and process improvements across manufacturing operations. This role ensures compliance with ISO:9001 standards and supports continuous improvement initiatives to enhance product quality and operational efficiency. Key Responsibilities: Develop and maintain quality control methodologies and documentation in alignment with ISO standards. Conduct internal audits and support external audits to maintain ISO certification. Manage CAPA (Corrective and Preventive Action) systems and drive resolution of non-conformances. Support new product launches with quality planning and risk assessments. Monitor and report on key performance indicators (KPIs) related to quality. Develop quality procedures, standards, and inspection of products and processes. Maintain and lead the Calibration System. Qualifications: Bachelor's degree preferred 2-3 years of experience in a quality engineering role, preferably in a manufacturing environment. Strong knowledge of ISO 9001 standards. Proficiency in quality tools such as FMEA, control plans, and root cause analysis. Certifications such as ASQ CQE, CQA, or ISO Lead Auditor are a plus. Excellent analytical, communication, and problem-solving skills. Preferred Skills: Familiarity with calibration systems and inspection equipment. Experience with leading Kaizen teams. Ability to lead cross-functional teams and manage multiple projects. Job Type: This is an in-person position requiring a 40-hour work week First Shift, Monday through Friday Benefits: 401(k) and company matching Health, Dental, and Vision insurance Flexible spending account Life insurance Paid time off

Job Summary The Manufacturing Engineer will play a key role in developing and sustaining production processes, equipment, and workflows that ensure components, subassemblies, and final products are manufactured safely, consistently, and in compliance with specifications and regulations. This role has architectural and system-level responsibility for the Manufacturing Execution System (MES), ensuring process traceability, conformance, and integration with Quality and Product Lifecycle Management (PLM) systems. The Manufacturing Engineer will also lead cross-functional initiatives with Product Engineering, Quality, Procurement, Operations, and Production to drive product conformity, efficiency, and continuous improvement. Essential Duties & Responsibilities An individual in this position must be able to successfully perform the following duties. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions. Other duties may be assigned. Develop, implement, and train staff in safe, reliable, and ergonomic production processes, workflows, and equipment. Create and maintain assembly and manufacturing instructions within the MES to enable post-production audit confirmation where required. Design, implement, and sustain tooling and fixturing to ensure accurate, repeatable, and efficient production. Oversee tooling, fixturing, and test equipment documentation, identification, calibration, and maintenance requirements. Design production work cells using lean manufacturing principles (5S, poke yoke, visual factory, kanban) to create an efficient and intuitive environment. Provide primary oversight of the MES, ensuring full alignment with QMS and PLM requirements. Support calibration, preventative maintenance, and scalability planning for production systems and equipment. Identify and resolve process constraints in collaboration with production and engineering teams. Partner with operators and technicians to understand process concerns, prioritize improvements, and implement effective solutions. Lead and support internal and external product/process audits. Facilitate brainstorming and cross-departmental collaboration to ensure cohesive, effective manufacturing solutions. Qualifications Required: Bachelor's degree in manufacturing, Industrial, or related engineering field, OR 7+ years of equivalent experience. 5+ years of experience in a regulated manufacturing environment. Demonstrated ability to lead cross-functional projects to successful outcomes. Experience training and mentoring junior engineers and assembly technicians. Strong organizational, analytical, and communication skills. Proficiency in 3D CAD. Experience implementing and supporting MES systems. Familiarity with FAA or other highly regulated manufacturing requirements. Proficiency in Microsoft Office programs. Preferred: Proficiency with SolidWorks and PDM systems. ERP experience (Infor CloudSuite Industrial or similar). Experience with external machining, tooling, and automation vendors. Knowledge of Epicor eFlex MES and/or MQTT Protocol. Working Conditions Work will be performed in both office and aerospace production environments with PPE required as designated. This role requires mobility on the shop floor, including kneeling, squatting, and bending to evaluate processes and equipment. Occasional lifting of up to 40 lbs. from floor to bench height may be required. DeltaHawk Engines, Inc. is an equal employment opportunity employer, and all qualified applicants will receive consideration or employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, or any other characteristic protected by law. PI5e7f61b08663-31181-38537683

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. Hours: 5am - 3pm, Tuesday-Friday Pay Rate: $22.35/hour (Quality Tech II) / $25.35/hour (Quality Tech III) Job Summary: The Quality Technician I/II/III is responsible for facilitating the parts quality process throughout the organization. In partnership with internal business units, this role ensures the precision and inspection of parts moving into the facility. This role supports Quality Management Systems, drives data collection, reporting and analysis. Partners with leaders in the daily operation of an area with responsibility to improve quality systems, processes, and performance. Responsibilities: Quality Tech I Conducts process and product audits to ensure team members are following standardized operating procedures and adhering to all quality standards. Implements resolutions from basic to moderately complex problems. Exercises judgement within procedures and practices in selecting methods and techniques for arriving at solutions. Implements process improvements to continuously improve quality. Cross train in multiple departments or stations and flex to other similar departments based on business necessity. Assist with NPI/ECN changes and other duties as assigned by Quality Supervisor or Manager Suggest and implement improvements of existing equipment, designs, and/or processes to improve safety, quality, delivery, and productivity. Resolve problems with assistance from peers or supervisors depending on the level and complexity. Quality Tech II All Quality Tech I responsibilities Able to conduct standardized problem-solving process and aid/support implementing corrective actions to resolve design, supplier, or production quality issues. Supports facility in gage/tool calibration and Gage Repeatability and Reproducibility (GR&R) Trains others in quality tool usage to implement process improvements to continuously improve quality. Quality Tech III All Quality Tech I & II responsibilities Uses initiative and judgement to lead problem solving and implementing appropriate countermeasures. Carry out calibration duties, update KPI board for Quality, assist with training new Quality Techs Leading team/virtual meetings and exchange job related information Solve problems independently within designated authority level. Uses root cause problem solving (5 WHY, 8D, PDCA, etc.) Effectively training other employees to work instructions/standard work. Requirements Associates degree or equivalent experience. 3 years of experience in an operational environment in a quality role Basic Qualifications: High School Diploma or equivalent 3+ years of quality experience Additional Qualifications: Has the ability to maintain a professional rapport with support groups and peers while achieving results. Leads communication to team members reviewing achievement to quality metrics and progress of countermeasures/projects. Supports communication to Supervisor of issues impacting quality with appropriate countermeasures. Ability to perform reading, writing, and math functions. Basic drawing, wiring, and schematic interpretation skills. Intermediate PC knowledge. Intermediate knowledge of Production Part Approval Process (PPAP), Process Failure Modes Effects Analysis (PFMEA), Quality Control Plans, mistake proofing, Nonconforming Material Reports (NMR), Engineering Change Requests (ECR), Statistical Process Control (SPC), and ISO Quality System processes. Knowledge in CMM programing and processes. Ability to train others Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

Job Summary: As a Quality Technician at Reader Precision Solutions, your role is vital for ensuring precise and excellent products. You will conduct detailed inspections, use precision measuring tools, and interpret prints to meet design specifications. Collaborating with production teams and engineers, you will address quality concerns, identify deviations, and maintain accurate records. Ensuring equipment calibration and contributing to continuous improvement are key responsibilities. If you're detail-oriented, have strong analytical and communication skills, and a passion for maintaining high-quality standards, this position allows you to apply your experience and make a significant impact in our commitment to excellence. Shifts Available: 2nd Shift: 3:00PM - 11:30PM Essential Duties & Responsibilities include but are not limited to: Quality Inspection: Conduct thorough inspections of machined parts and components to ensure they meet specified quality standards. Utilize precision measuring tools and equipment to verify dimensions, tolerances, and other quality parameters. Identify and report any deviations from quality standards and work with production teams to address and resolve issues. Print Reading: Interpret and accurately read engineering drawings, prints, and specifications. Understand geometric dimensioning and tolerancing (GD&T) to ensure compliance with design requirements. Documentation and Reporting: Maintain detailed and accurate records of inspection results, deviations, and corrective actions taken. Generate quality reports and communicate findings to relevant stakeholders. Collaboration: Work closely with production teams, engineers, and other departments to address quality concerns and implement continuous improvement initiatives. Participate in cross-functional teams to resolve quality-related issues and contribute to process optimization. Calibration and Maintenance: Ensure that inspection equipment and measuring tools are properly calibrated and maintained. Perform regular checks on equipment to guarantee accuracy in measurements. Quality Procedures and Compliance: Adhere to established quality control procedures and protocols. Stay updated on industry standards and changes in quality requirements. Skills & Qualifications: 2+ years of previous experience in a quality role, preferably in a machine shop environment. Proficiency in reading and interpreting prints and technical drawings. Familiarity with precision measuring tools such as calipers, micrometers, gauges, and optical comparators. Ability to operate CMMs, vision systems, round test, surface testing equipment, and all other inspection tools & equipment as may be required. Understanding of quality management systems and standards. Detail-oriented with the ability to accurately follow work instructions. Good computer skills with proficiency & accuracy in performing data entry. Effective decision making and problem-solving skills with a drive for results. Excellent verbal and written communication skills. A collaborative mindset that focuses on teamwork. A positive attitude and exceptional aptitude for growing your skills. Ability to effectively multi-task and prioritize time-sensitive projects/tasks according to changing schedules and tight timeframes. Knowledge of basic mathematics (arithmetic & geometry) as well as basic knowledge of advanced statistical techniques and related application to a process Vision corrected to 20/20. Knowledge of geometric dimensioning and tolerancing (GD&T) is a plus. Physical/Environmental Demands: The characteristics listed below are representative of the physical and environmental demands required by an individual to successfully perform the essential duties of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform their essential duties. In this role you can expect to spend a significant amount of time on your feet, conducting inspections and working closely with machinery/inspection equipment. The position may require lifting and carrying moderate loads (10lbs often, 25lbs frequently, up to 50lbs occasionally), as well as the ability to move comfortably in a manufacturing environment. Precision work with measuring tools and attention to detail will be essential, often involving extended periods of focused concentration. The environment may include exposure to noise, dust, solvents and other typical conditions associated with a machine shop setting. Adequate safety measures and personal protective equipment will be provided to ensure a secure and comfortable working environment. Benefits & perks of joining the Reader Precision Solutions team include: RPS team members enjoy a challenging & fast-paced work environment in a high-tech manufacturing facility named one of the TOP WORKPLACES by the Milwaukee Journal Sentinel THREE YEARS IN A ROW (2022, 2023 & 2024) and the 35th Annual Wisconsin Manufacturer of the Year . Our work environment is extremely clean, well lit, organized (5S), & climate-controlled. In addition, our team thrives in a supportive culture that provides engaged leadership, ongoing recognition for performance results, & a great benefits package. Competitive wages (paid weekly on Thursday's) 8% of base pay shift differential (2nd & 3rd shift) Benefits begin the month following 30 days of employment: health insurance with points based, holistic wellness program, dental, life, & disability insurance Partnership with a near site local clinic for FREE health services including primary & preventative care, walk in visits, labs, prescriptions, etc. FREE vision insurance! 401(k) retirement savings plan with up to 4.5% company match (immediately vested!) Vacation accrual starts upon hire - accrue up to 2.5 weeks in first year! 9 paid holidays with up to two discretionary holidays each year Education assistance up to $5,250 annually (after 12 months of service) Professional development opportunities - internal & external (cross-departmental training, PMPA conferences, IMTS-Chicago, local technical colleges/universities, & more…) Career advancement - ongoing training & mentoring with opportunity to grow your skills Performance bonus - potential to receive a discretionary year-end bonus based on individual and group performance Company paid Short-Term Disability policy Company events - team lunches, summer picnic event, holiday party Company zoo pass to Milwaukee County Zoo Voluntary pet insurance Holistic wellness program - earn up to $700 in incentives through points accumulation for accomplishing a variety of wellness activities. Also offered by the Company are employer paid onsite flu shots, biometric screenings, free health coaching & MUCH more! Employer paid life insurance - $50,000 policy with options for voluntary life up to $400,000 benefit maximum Financial planning resources & onsite financial wellness workshops Employer subsidized work shoes & safety glasses program Reader Precision Solutions branded attire - $100 annual allowance Employee Referral bonus - $1,000 Satisfying work…leaving work at the end of the day knowing that the GREAT work you do is meaningful and appreciated by the Company, our clients, and end users who benefit from the high-quality components we manufacture for them! With the right mix of drive, commitment to excellence, & consistent performance, you will have the opportunity to further develop your skills in different areas with increasing responsibilities & rewards! Reader Precision Solutions Four Pillars: Innovation, Empowerment, Integrity & Respect Innovation - we apply creative solutions to exceed expectations internally and externally. We deliver creative solutions by pursuing continuous improvement, challenging the limits of conventional thinking to drive positive change, and engaging our customers to achieve synergy. Empowerment - we equip our employees to succeed. We nurture success with setting realistic goals and standards; with accountability and regular performance feedback, providing training opportunities for growth and learning and offering employees a safe and modern work environment. Integrity - our reputation is everything. We preserve and enhance our reputation by operating with the highest ethical standards, focusing on customer needs, and contributing positively to our community and environment. Respect - we act with honor in all our interactions. In our interactions, we accept and value individual differences, work together with a positive attitude and promote open and honest communication in a team-based environment. Reader Precision Solutions is a premier contract manufacturer of precision machined components, delivering high-quality, mission-critical solutions across a wide range of industries and applications. With decades of expertise, Reader Precision operates under a comprehensive turnkey manufacturing model, offering end-to-end control from early supplier involvement and engineering collaboration to full-scale production, precision finishing, and logistics management. This integrated approach ensures exceptional quality, reliability, and responsiveness for clients in the military & weapons systems, dental & healthcare, defense & tactical, flow control, and specialty markets. Reader Precision Solutions proudly serves a diverse customer base across North America and Europe. To discover why Reader Precision Solutions is the first choice for our partners, and an employer of choice, visit our website: **************************** Reader Precision Solutions is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce.

About Us Founded in 1908, Merz is a successful, family-owned specialty healthcare company with a rich history. As a leading global aesthetics business, our award-winning portfolio of injectables, devices, and skincare products empowers healthcare professionals to enhance confidence through aesthetic medicine. Our purpose is to fuel confidence by helping people look better, feel better, and live better. We believe you do not have to choose between living life and making a living. Live your best life with Merz Aesthetics. A Brief Overview Contributes to equipment projects and manufacturing process improvements. Provides insight and contributes to production reliability. Participates as a team member for technical operations sections of product development projects, including scale-up and production line design. Leads process development and equipment projects while maintaining schedules and meeting budgets. Success is measured through implementation of projects that meet desired outcome, budget, timeline, and manufacturing goals. What You Will Do Process design Coordinates implementation of manufacturing equipment, process automation, process expansions, and new initiatives. Includes project budgeting, design & interfacing with vendors of equipment and tooling, and maintaining appropriate documentation for new equipment and processes including qualification, verification, and validation. Process sustenance Identify production interruptions and establish risk mitigations. Troubleshoot equipment and processing issues in support of production goals. Determine calibration and maintenance needs of new equipment. Process evaluation Establish new product costs, develop and implement necessary SOP's, and establish processing, packaging and test specifications for products and equipment. Identify process inefficiencies and implement strategies, including automation and scale-up, to identified areas. Maintain Budgets Create and maintain project time lines and plans, accelerating where possible. Create project and/or capital budgets in cooperation with management to meet department budgets. Minimum Requirements Bachelor of Science (B.S.) in Biomedical Engineering, Mechanical Engineering, Chemical Engineering, or Physical Science. 1 year of relevant work experience. Preferred Qualifications Master of Science (M.S. or M.Sc.) in Engineering, Business, or related discipline. 3+ years of medical device or pharmaceutical process experience or similar experience in a regulated industry. Technical & Functional Skills Familiar with ISO 13485 / FDA QSR / GMP / Other medical industry regulations. Ability to formulate program strategy, budgets and timelines. Solidworks and/or AutoCAD. Six Sigma Methodologies. Statistical Analysis. Strong technical and problem-solving skills. Ability to communicate and write effectively. Benefits: Comprehensive Medical, Dental, and Vision plans 20 days of Paid Time Off 15 paid holidays Paid Sick Leave Paid Parental Leave 401(k) Employee bonuses And more! Your benefits and PTO start the date you're hired with no waiting period! Come join a company that is committed to being a trusted partner focused on our customers while not forgetting about our employees! This position is not eligible for employer-sponsored work authorization. Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored work authorization.

About Us Founded in 1908, Merz is a successful, family-owned specialty healthcare company with a rich history. As a leading global aesthetics business, our award-winning portfolio of injectables, devices, and skincare products empowers healthcare professionals to enhance confidence through aesthetic medicine. Our purpose is to fuel confidence by helping people look better, feel better, and live better. We believe you do not have to choose between living life and making a living. Live your best life with Merz Aesthetics. A Brief Overview Contributes to equipment projects and manufacturing process improvements. Provides insight and contributes to production reliability. Participates as a team member for technical operations sections of product development projects, including scale-up and production line design. Leads process development and equipment projects while maintaining schedules and meeting budgets. Success is measured through implementation of projects that meet desired outcome, budget, timeline, and manufacturing goals. What You Will Do * Process design Coordinates implementation of manufacturing equipment, process automation, process expansions, and new initiatives. Includes project budgeting, design & interfacing with vendors of equipment and tooling, and maintaining appropriate documentation for new equipment and processes including qualification, verification, and validation. * Process sustenance Identify production interruptions and establish risk mitigations. Troubleshoot equipment and processing issues in support of production goals. Determine calibration and maintenance needs of new equipment. * Process evaluation Establish new product costs, develop and implement necessary SOP's, and establish processing, packaging and test specifications for products and equipment. Identify process inefficiencies and implement strategies, including automation and scale-up, to identified areas. * Maintain Budgets Create and maintain project time lines and plans, accelerating where possible. Create project and/or capital budgets in cooperation with management to meet department budgets. Minimum Requirements * Bachelor of Science (B.S.) in Biomedical Engineering, Mechanical Engineering, Chemical Engineering, or Physical Science. * 1 year of relevant work experience. Preferred Qualifications * Master of Science (M.S. or M.Sc.) in Engineering, Business, or related discipline. * 3+ years of medical device or pharmaceutical process experience or similar experience in a regulated industry. Technical & Functional Skills * Familiar with ISO 13485 / FDA QSR / GMP / Other medical industry regulations. * Ability to formulate program strategy, budgets and timelines. * Solidworks and/or AutoCAD. * Six Sigma Methodologies. * Statistical Analysis. * Strong technical and problem-solving skills. * Ability to communicate and write effectively. Benefits: * Comprehensive Medical, Dental, and Vision plans * 20 days of Paid Time Off * 15 paid holidays * Paid Sick Leave * Paid Parental Leave * 401(k) * Employee bonuses And more! Your benefits and PTO start the date you're hired with no waiting period! Come join a company that is committed to being a trusted partner focused on our customers while not forgetting about our employees! This position is not eligible for employer-sponsored work authorization. Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored work authorization.

"Under the direction of the Director of Automation, the Automation Continuous Improvement Engineer is responsible for analyzing, developing, supporting, and documenting the ongoing continuous improvement projects within the Automation Engineering department to increase the efficiency, operation and readiness of the plants automation equipment. The CI Engineer will use Six Sigma tools to analyze and support recommendations for machine improvements and cost saving projects. " Essential Functions: Provide analytical data and documentation to support machine improvements that will lead to improved machine efficiencies. Collaborate and review suggested design improvements with Automation Engineer Design Team Ensure conformance to engineering codes, IATF16949 and HellermannTyton standards for quality Use CAD/SolidWorks software to create/modify and update drawing within the EPDM vault Use AB software to create/modify and update machine Programmable Logic Control programs as required. Modify and update CAD/SolidWorks files in accordance to standard processes in place in the department. Possess advanced skills with vision systems and integration for quality inspections. Build and develop strong working relationships with cross-functional teams to work towards common goals and projects outcomes defined by Operations plant management team. Participate in project hand off processes that require process optimization, process flow, and assisting with training as required. Evaluate high scrap machines/cells using problem solving techniques that could include analysis of material, tooling, process or equipment and prepare data to support recommendations/findings. Lead cross-functional teams to successful project completion outcomes, as directed by the Director of Automation and Operations management team. Recommend and implement measures to improve equipment performance, quality and production methods. Stay current with technology and industry standards Comply with all quality and safety regulations in compliance with OSHA and HellermannTyton policy Other Functions Travel could be required on a "as needed" basis Attend all meeting with cross-functional teams to review project work and direction Lend support through training and technical advice to help other technicians become more efficient. All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) as a condition of employment. Success in this role will require Use of SolidWorks/Cad System Use of AB Programmable Logic Control software as required Six Sigma methodologies and practices Project management skills and creating documentation Ensure conformance to ASME codes as required Follow all IATF16949 and company standards for quality and manufacturability Manage and leverage resources to complete projects on time and within budget Vision System Integration and control Ability to define problems, collect data, establish facts and draw valid conclusions to recommend improvements. Ability to effectively present information and respond to questions from groups, managers and fellow team members. Experience in communicating with suppliers and vendors Basic to advanced skills in pneumatic systems Advanced Programmable Logic Control knowledge What You'll Bring Bachelor of Science (B.S.) or equivalent from a four year college or technical school with 3+ years experience in Automation Design/Integration and Continuous Improvement projects involving automation. Ability to read and interpret documents such as technical specifications, schematics, and ladder logic Certified Six Sigma Green Belt is preferred Ability for overnight travel by air or land as needed. Must have a valid drivers license, with an acceptable driving record, along with adequate insurance #LI-MS1 #LI-Onsite By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

About Us Founded in 1908, Merz is a successful, family-owned specialty healthcare company with a rich history. As a leading global aesthetics business, our award-winning portfolio of injectables, devices, and skincare products empowers healthcare professionals to enhance confidence through aesthetic medicine. Our purpose is to fuel confidence by helping people look better, feel better, and live better. We believe you do not have to choose between living life and making a living. Live your best life with Merz Aesthetics. A Brief Overview Contributes to equipment projects and manufacturing process improvements. Provides insight and contributes to production reliability. Participates as a team member for technical operations sections of product development projects, including scale-up and production line design. Leads process development and equipment projects while maintaining schedules and meeting budgets. Success is measured through implementation of projects that meet desired outcome, budget, timeline, and manufacturing goals. What You Will Do * Process design Coordinates implementation of manufacturing equipment, process automation, process expansions, and new initiatives. Includes project budgeting, design & interfacing with vendors of equipment and tooling, and maintaining appropriate documentation for new equipment and processes including qualification, verification, and validation. * Process sustenance Identify production interruptions and establish risk mitigations. Troubleshoot equipment and processing issues in support of production goals. Determine calibration and maintenance needs of new equipment. * Process evaluation Establish new product costs, develop and implement necessary SOP's, and establish processing, packaging and test specifications for products and equipment. Identify process inefficiencies and implement strategies, including automation and scale-up, to identified areas. * Maintain Budgets Create and maintain project time lines and plans, accelerating where possible. Create project and/or capital budgets in cooperation with management to meet department budgets. Minimum Requirements * Bachelor of Science (B.S.) in Biomedical Engineering, Mechanical Engineering, Chemical Engineering, or Physical Science. * 1 year of relevant work experience. Preferred Qualifications * Master of Science (M.S. or M.Sc.) in Engineering, Business, or related discipline. * 3+ years of medical device or pharmaceutical process experience or similar experience in a regulated industry. Technical & Functional Skills * Familiar with ISO 13485 / FDA QSR / GMP / Other medical industry regulations. * Ability to formulate program strategy, budgets and timelines. * Solidworks and/or AutoCAD. * Six Sigma Methodologies. * Statistical Analysis. * Strong technical and problem-solving skills. * Ability to communicate and write effectively. Benefits: * Comprehensive Medical, Dental, and Vision plans * 20 days of Paid Time Off * 15 paid holidays * Paid Sick Leave * Paid Parental Leave * 401(k) * Employee bonuses And more! Your benefits and PTO start the date you're hired with no waiting period! Come join a company that is committed to being a trusted partner focused on our customers while not forgetting about our employees! This position is not eligible for employer-sponsored work authorization. Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored work authorization.