Quality engineer jobs in Novato, CA

K2 Pure Solutions, founded in 2010, is a Chlor-Alkali Manufacturer operating inherently safer technology to produce chemicals such as bleach for water disinfection in the surrounding Northern California communities. Bleach is the modern, preferred water treatment chemical displacing chlorine throughout the world. K2 Pure Solutions produces bleach onsite from nothing but salt, water, and electricity eliminating the danger and risk of a chlorine railcar release into communities trans-America. Other chlor-alkali products produced by K2 Pure Solutions include chlorine, hydrogen, hydrochloric acid, and caustic soda. The Production Engineer acts as an experienced technical resource for plant operations in a modern Chlor-Alkali production facility, applying technical skills to optimize plant performance, resolve problems, and enable safe and environmentally acceptable production of low cost, quality products. Solid technical skills combined with excellent communication, organizational ability, and leadership attributes are key to both immediate and long-term success in the role. Responsibilities Understands and applies all Environmental, Health & Safety (EH&S) operational requirements. Understands chemical engineering fundamentals and provides technical advising on operations while maintaining high standards for process safety. Optimizes daily production to achieve business and plant goals (i.e. EH&S, quality, reliability, cost). Participates in advanced troubleshooting and coaches others to learn these skills. Participate in commissioning of new process equipment installations. Coordinate and assist in implementation of minor plant system changes. Including small equipment additions, modifications and/or deletions and minor process design. Coordinates and follows up the improvement project of production efficiency. Provide operational and technical support to project coordinator(s) for large, extensive plant system changes. Includes operational review, assistance with cost/benefit analysis, and participating in Hazard Reviews. Assist in writing and reviewing Unit Operating Procedures in assigned areas of the Plant. Support plant leadership with plant material balances, yields, closures, project design scope, etc. as deemed necessary to maintain operations. Completes process engineering study and design for new projects and coordinate with Engineering Department to complete projects. Assist with annual expense budget preparation. Participate in committees as assigned. Performs special projects and studies as assigned. Carry out cost/benefit analysis for special projects. Perform internal technical training sessions for operating personnel. Share weekend call duty with other Tech staff personnel. Perform duties in a manner that protects personal safety as well as the safety of all personnel on site. Whenever appropriate; promptly report Safety, Health or Environmental incidents or issues to management so the situation can be corrected. Perform the primary thinking encompassed by this job description. Comply with all Company policies and procedures. Fully support Company goals of continuous improvement and operational excellence at strategic and tactical levels including reviewing area of responsibility for improvement opportunities to initiate projects or communicate ideas to management as well as active participation on project teams Maximizes plant production capability and assists with tracking and evaluation of asset utilization data for areas of responsibility. Facilitates and ensures that appropriate root cause analysis is completed and corrective actions are implemented to address unplanned events. Collaborate with project team to identify and prioritize improvements. Occasionally interface with contractors and vendors as project/process owner. Qualifications Bachelor of Science in Chemical Engineering 3+ years plant engineering experience (prefer manufacturing/plant operation experience in a Chlor-Alkali, bleach production facility and/or experience with chlorine scrubbers). Company Benefits • Subsidized medical, dental, and vision insurance • Medical and dependent care FSA options • 401k company matching with immediate vesting • 8 company paid holidays plus 2 floating holidays of your choice • Employer paid 1x annual life insurance • Paid sick leave • Paid vacation that increases with years of service • Regular social events for employee & employee's family Salary Range - The starting base pay for this role is between 110K - 185K annually at the time of posting. The actual base pay depends on many factors, such as education, experience, and skills. Base pay is only one part of K2 Pure Solution's competitive total compensation package that can include strong benefits, perks and bonuses. The base pay range is subject to change and may be modified in the future.

About the Role The Materials Developer is responsible for leading the end-to-end development, commercialization, and quality assurance of trims, and labels for assigned product categories. This role acts as the primary technical owner for all material details, driving supplier performance, and ensuring all components meet the company's quality, cost, and sustainability targets with minimal supervision. The Developer proactively analyzes development bottlenecks, introduces process improvements, and serves as the internal technical expert for their material portfolio. You'll Make a Difference By Development Ownership Independently managing seasonal trim and label development for assigned categories. (All TOPS Apparel and BOTTOMS Sundries) Translating design intent into manufacturable specifications and proactively identify technical risks. Communicating timelines and requirements directly with suppliers to ensure on-time execution. Troubleshooting development issues impacting SMS and production, providing solutions to cross-functional partners. Technical Expertise & Quality Reviewing and approving lab dips and submits based on color standards, tolerances, and performance requirements. Coordinating all material testing and ensuring compliance with company and industry standards. Evaluating supplier performance data and supporting continuous quality improvement with key vendors. Data Management & Process Improvement Maintaining accurate material and color data in Centric PLM; ensuring all commercialized materials are production-ready. Using PLM reporting to forecast calendar risks and development delays. Recommending improvements to processes, approval flow, and PLM data structure to increase efficiency. Cross-Functional Collaboration Serving as the technical contact for suppliers, factories, Design, Production, Sourcing, and QA. Maintaining an organized trims and labels catalog in the material library for team reference. Other duties as assigned. About You BA/BS in Apparel Design, Textiles, or related field. 3-5 years of experience in the apparel industry. Understanding of the end-to-end design and development process. Basic knowledge of textile properties, including dyeing, finishing, and fabric performance. Strong organizational skills and ability to utilize systems and tracking tools effectively. Strong communication skills with clear and concise follow-through. Effective time management and ability to work collaboratively in a team environment. Critical thinker with analytical, problem-solving, and adaptable mindset. Experience with Centric PLM, Microsoft Office, and Excel. About Ariat Ariat is an innovative, outdoor global brand with roots in equestrian performance. We develop high-quality footwear and apparel for people who ride, work, and play outdoors, and care about performance, quality, comfort, and style. The salary range for this position is $75,000 - $85,000 per year. The salary is determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data for geographic locations. Ariat in good faith believes that this posted compensation range is accurate for this role at this location at the time of this posting. This range may be modified in the future. Ariat's holistic benefits package for full-time team members includes (but is not limited to): Medical, dental, vision, and life insurance options Expanded wellness and mental health benefits Paid time off (PTO), paid holidays, and paid volunteer days 401(k) with company match Bonus incentive plans Team member discount on Ariat merchandise Note: Availability of benefits may be subject to location & employment type and may have certain eligibility requirements. Ariat reserves the right to alter these benefits in whole or in part at any time without advance notice. Ariat will consider qualified applicants, including those with criminal histories, in a manner consistent with state and local laws. Ariat is an Equal Opportunity Employer and considers applicants for employment without regard to race, color, religion, sex, orientation, national origin, age, disability, genetics or any other basis protected under federal, state, or local law. Ariat is committed to providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, email *************************. Please see our Employment Candidate Privacy Policy at ********************* to learn more about how we collect, use, retain and disclose Personal Information. Please note that Ariat does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agreement, Ariat will not consider or agree to payment of any referral compensation or recruiter/agency placement fee. In the event a recruiter or agency submits a resume or candidate without a previously signed Agreement, Ariat explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted directly to hiring managers, are deemed to be the property of Ariat.

Join Yorke Engineering, LLC, an Environmental Consulting leader in California that implements Environmental Engineering and Compliance solutions for our clients throughout California. Our mission is to solve environmental compliance problems for industrial and governmental/infrastructure facilities. We are a growing and dynamic organization of highly respected professionals. Yorke Engineering, LLC has assisted over 1,400 client organizations with their Air Quality and Environmental Compliance, Engineering, and Permitting needs. Our philosophy is to efficiently help government and industrial customers with the complex array of environmental laws and regulations. From simple permits to complex agency negotiations, from small companies to the largest of California's organizations, Yorke successfully solves our clients' Air Quality and Environmental challenges. Our team has over 1,000 years of combined environmental experience and consists of engineers and scientists that specialize in Air Quality, Waste, Water, CEQA, Safety, and Industrial Hygiene. We are looking for a sharp Mid to Senior level Air Quality Engineer/Scientist (Environmental Permitting and Compliance) to join our team in Northern CA. This is a full-time position at 40 hours per week from one of our Northern CA offices (Berkeley, San Francisco, or San Jose) during our normal business hours. We offer competitive salaries, a full benefits package including Paid Time Off, Holidays, Full Medical/Dental/Vision, along with a 401k program with a generous company match. Position Summary: The Mid to Senior level Air Quality Engineer/Scientist (Environmental Permitting and Compliance) performs professional engineering work, leading and executing the compliance and permitting functions in relation to Air Quality Regulations and Compliance. This candidate will be reviewing processes and equipment, analyzing permit-related technical and regulatory issues, and communicating those analyses within Yorke, the client organization, with government agencies and with the public at large. The work is challenging, broad in scope, and variable from project to project. The position involves effective communication, decision-making, and time management. The candidate performs other duties as required or assigned. The candidate's experience and qualifications we are seeking include: 5-15+ years of work experience in the Air Quality and/or Environmental industry in an engineering role (preferably in a consulting environment); Experience in the environmental services industry focusing on Air Quality services: Process and equipment review; Air quality permitting under BAAQMD, SCAQMD, SJVAPCD and other Air Districts, including Title V Permitting; RECLAIM implementation and reporting; Annual Emissions Reporting; Air Dispersion Modeling; Air Quality Assessments including Data Analysis and Emission Inventories; General Air Quality Compliance for facilities in CA. Ability to be an active team member on project teams towards project completion within project scope, budget and schedule and ensure quality work product and deliverables; Ability to work with clients, staff, and regulators through effective communication and expertise by fostering a collaborative environment without losing focus of quality; Proven track record or desire to engage in successful regulatory work in dealing with the SCAQMD, BAAQMD, SJVAPCD, EPA, CARB and/or other similar regulatory agencies; Experience or desire to work on-site at client facilities; Prepare reports and submissions in timely manner; Experience with handling highly technical data and technical data interpretation; Highly motivated to continue working in Air Quality environmental field and expand their knowledge and experience; CA Regulatory/Compliance experience is required. Job Requirements: B.S or M.S. degree in Chemical Engineering, Environmental Engineering, or Mechanical Engineering, or other relevant technical degrees from an accredited college (minimum GPA of 3.0); Ability to work collaboratively in a team fashion, handle several projects at once, prioritize work, and work efficiently; Desire to learn or developing technical expertise in environmental rules and regulations; Excellent oral and written communications skills; Experience in conflict resolution and crisis management; Track record of successful analysis, interpretation, and application of rules and regulations towards practical solutions; Ability to think critically and develop solutions; Software Knowledge: Strong Microsoft Excel, Word, Outlook, and Powerpoint skills (required); Microsoft 365 Applications, including Sharepoint (a plus) EIT, CPP or P.E. Certification (a plus).

Job Requirements Qualifications: Strong experience in automation testing using Playwright and Typescript (automation first mindset) Experience working as a Quality Assurance Engineer 3+ years' experience in manual testing Strong experience in API and Backend testing of cloud technologies Experience with API contract validation, versioning Experience working with SQL/NoSQL systems UI automation Strong coding experience with automated testing frameworks, tools and services Preferred Qualifications: Fluency in programmatic-level testing, user-level automation, and API level testing Experienced in Agile or Scrum software development methodologies Supply chain experience is plus Role details As a Quality Assurance Engineer, you will play a key role in setting up the testing strategy and tools for testing cloud software systems and features from the ground up. You will test a wide range of cloud technologies both in isolation and within the larger product ecosystem. The successful candidate for this role will be obsessed with finding and categorizing bugs, ensuring feature completeness and assessing reliability and performance of cloud systems. Proven experience as a Software Automation Engineer (2-3+ years) with strong hands-on skills in Playwright/TypeScript. An eye towards automation to perform repetitive testing tasks as well as regression testing covering various versions of end user client software. Provide coding and testing expertise for our team and be a constant advocate for our customers. High level of coding aptitude combined with a demonstrated passion for Quality Assurance and be responsible to own and drive complex projects. Test Automation Frameworks: Design and implement robust Test Automation Frameworks to ensure reusability, maintainability, and scalability of automation scripts. Continuous Improvement: Stay up to date with emerging technologies and best practices in test automation and continuously optimize the test automation process. Strong coding skills in TypeScript/React/Nest and Python/Java Proven experience in UI, API, and backend integration tests

Riedinger Consulting is a Sausalito based firm that specializes in management and analysis of engineering and construction projects. In business since 1997 as a woman-owned business, Riedinger Consulting assists public and private owners, general contractors, subcontractors, and design consultants with contract dispute resolution and project management services. Job Description Project Engineer/Staff Consultant will perform multiple tasks in support of both project management and contract dispute services on a variety of construction projects. As part of project management services, Project Engineer performs the following in support of the Project Manager: Attend weekly construction job site meetings with the Owner, Architect, and Contractor. Prepare meeting agenda and meeting minutes. Review, coordinate, and track submittals, shop drawings, requests for information (RFIs), and change proposals. Review project schedules submitted by Contractor and track construction progress. Collect Contractor daily reports and review. Ensure that the project site and construction activities are being consistently documented in writing and in photos. Assist with review of Contractor proposed change orders, and help prepare change orders for Owner approval. Coordinate and manage the drawings and specifications, clarification and interpretation, shop drawings, and submittal review processes. Coordinate the activities of the materials testing sub-consultant(s). Identify plan/construction issues and bring them directly to the attention of the Owner and design team before discussing them with the Contractor. Work to resolve conflicts and issues that may arise during construction of the Project. Quality Assurance/Quality Control: Assist Project Manager in verifying that all materials installed coincide with the approved submittals. File hard or electronic inspection reports, test reports, etc. Ensure that the Contractor maintains field mark-up drawings for use in preparation of as-builts and verify records for accuracy before final close-out. Collect, compile, review, and ensure that as-built information is accurately shown in the original set of plans. Review as-builts from Contractor and submit to the Owner a final set of as-builts. Participate in the job closeout process. As part of contract dispute services, Staff Consultant performs schedule, labor productivity, issue, and cost analyses. Analyses include the review of contemporaneous project documents including: Contracts and contract plans and specifications Project schedules and cost estimates Change orders and change order requests Job cost reports and labor reports Contractor daily reports and inspection reports Requests for information, correspondence, and emails Progress payments and progress photos Meeting minutes From this review, consultant will find information relevant to the preparation or defense of a construction claim. Additionally, Staff Consultant will work with the client's project team to get information about the project and the key issues impacting the project schedule. Consultant will summarize key information, findings, and conclusions in summary spreadsheets, schedules, exhibits, reports, and presentations for review by senior management and legal counsel. Specific Skills and Expertise 3-5 years of experience in construction management. B.S. degree in engineering, preferably civil or mechanical, or bachelor degree in construction management or architectural engineering. Proficient in use of MS Excel, Powerpoint, Word, and construction management software, such as Procore. Scheduling experience using Primavera P6, and MS Project. Excellent organizational, writing, and communication skills. Ability to read plans & specifications. Ability to analyze and interpret data, to summarize key information, and draw conclusions in a compressed timeframe. Attentive to details. Exercises creativity and resourcefulness in completing tasks accurately. Ability to work independently or in teams. Prioritizes and plans work activities. Core Values Strives for excellence. Positive, can-do attitude. Offers outstanding client service. Inspires respect and trust. Takes initiative to identify and analyze problems and propose solutions. Demonstrates and promotes high standards for quality and productivity. Contributes to building a positive team spirit and working environment. Demonstrates professionalism and accepts responsibility for own actions. Follows through on commitments. How to Apply Please send us your resume along with a cover letter describing your qualifications for the position to Kim Maynard: (***************************) with subject “Project Engineer/Staff Consultant.” Thanks for your interest! Please note that Riedinger Consulting is not able to provide visa sponsorship. We require candidates to already have work authorization in the U.S. without the need for employer sponsorship.

Job No. ROCGJP00038410 Client: Genentech Contract Duration : 1 Year Rate: $35 - $40/hr. This position supports the establishment of a world-class packaging organization by providing technical expertise in the development and deployment of new packaging systems for pharmaceutical products and combination products. The selected candidate will work on a variety of packaging initiatives and will support Global Packaging Development in establishing packaging systems for clinical and commercial use. Job Responsibilities Develop and qualify global primary and secondary packaging solutions for sterile, non-sterile and combination products, incl. author/co-author the related packaging specifications and qualification documentation Qualification of global packaging solutions in line with the current validation requirements (e.g. Development of test protocols and reports, risk assessment, execute IQ/OQ/PQ, and shipping qualification) Maintenance of global packaging solutions (e.g. support change control records, provide impact assessments, execute requalification) Evaluate and develop new materials and/or alternate packaging materials, packaging solutions or packaging systems based on product, regulatory, business or technical requirements Support or lead projects delivering innovative packaging technologies and systems under Roche global packaging technology centers Qualifications Education & Qualifications: Personal Requirements: Bachelor degree, preferably with an engineering degree in packaging, materials science, or a related field At least 1 year working experience in relevant field Proficient technical leadership, collaboration and communication skills English language proficiency required Technical Requirements: Knowledge of packaging testing methodologies and standards including, shock, drop and vibration testing, peel force and tensile testing, barrier analysis, CCI/Sterile integrity, DIN, ISO, ISTA, USP, FDA, MHRA and ASTM standards for packaging design and validation Knowledge of packaging process equipment, related to steriles, and non-steriles, and combination products packaging activities (e.g. vials, PFS, devices, aseptic form/fill/seal, blister and bottle filling lines), printing systems and serialization Knowledge on equipment IQ, OQ, and PQ and development of qualification protocols / reports for packaging and shipping qualification activities Knowledge of design control for combination products Working knowledge of computer systems including TOPS, CAD or Solidworks, and Microsoft tools including MS project, and Adobe Knowledge of industry best practices and technical writing skills such as GMP and GDP

• Study time, motion, methods, and speed involved in maintenance, production, and other operations to establish standard production rate and improve efficiency. • Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards. • Read worker logs, product processing sheets, and specification sheets, to verify that records adhere to quality assurance specifications. • Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, and anticipated delays. • Prepare charts, graphs, and diagrams to illustrate workflow, routing, floor layouts, material handling, and machine utilization. Required Skills: • Creativity, verbal and written communication skills, analytical and problem-solving ability. • Team player and detail oriented. • Ability to make sketches, engineering drawings and common computations. • Ability to read and interpret blueprints, technical drawing, schematics and computer-generated reports. • Previous experience with computer applications and software related to engineering field, such as Computer Aided Design (CAD). Education/Experience: • Bachelor's degree in engineering required. • 5-7 years of experience required. Pay for this position is based on market location and may vary depending on job-related knowledge, skills, and experience. As a contractor you may also be eligible for health benefits such as health, dental, and vision as well as access to a 401K plan. Applicants should apply via The Mice Groups Inc. website (******************* or through this careers site posting. We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates. Privacy Policy One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you've requested. The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information. The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website. The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to *******************

Job Title: Manufacturing Engineer Compensation: $100,000 -$125,000 Full employer-covered medical, dental, vision, and life insurance for employee, 401(k) ** VISA SPONSORSHIP AND RELOCATION ASSISTANCE ARE NOT AVAILABLE FOR THIS ROLE ** EXPERIENCE WITH SEMICONDUCTOR MANUFACTURING PROCESSES IS A MAJOR PLUS! What You Will Be Doing: Develop and maintain detailed manufacturing process documentation including Operation Method Sheets, test procedures, test protocols, and quality checklists for electromechanical assemblies. Design custom fixtures, shop drawings and production tools to enhance efficiency, accuracy, and repeatability in manufacturing workflows. Translate engineering designs into clear instructions and shop drawings for production teams. Lead engineering build efforts and support assembly of complex control systems and modules. Partner with teams across Sales, Quality, and Production to refine manufacturing methods and improve outcomes. Identify and resolve production and quality issues through hands-on troubleshooting and structured problem-solving. Contribute to customer projects, ensuring deadlines and quality standards are consistently met. What You Bring: A bachelor's degree in Mechanical Engineering, preferably with experience in high-tech or semiconductor manufacturing. 5-8 years of hands-on experience in machining or fabrication, particularly with metals and plastics. Strong proficiency in SolidWorks and extensive knowledge of Geometric Dimensioning and Tolerancing (GD&T). A practical, problem-solving mindset with a strong mechanical aptitude and a data-informed approach. Clear and confident communication skills, with the ability to present ideas and results to both internal stakeholders and external customers. Working knowledge of manufacturing software, Excel, and standard business analysis tools. Ability to work independently, stay organized, and contribute in a fast-paced, cross-functional team environment.

Manufacturing Test Engineering Manager (or Senior/Lead Test Engineer) Red Oak Technologies is partnering with our client, a leader in LiDAR sensor technology, to identify a highly skilled Manufacturing Test Engineering Manager. We are open to considering strong Senior or Lead-level Test Engineers who are ready to take on team leadership responsibilities while continuing to code daily. This role is fully onsite in San Francisco, CA. Position Overview The Manufacturing Test Engineering Manager will be a hands-on technical leader responsible for developing and maintaining production test software for high-volume LiDAR sensor manufacturing. The ideal candidate will have strong Python development skills, proven experience in test engineering for electro-mechanical assemblies, and the ability to mentor and guide a team while contributing individually on a daily basis. The role requires close collaboration with cross-functional teams to improve test coverage, reduce test time, and ensure production readiness as new products move from development into manufacturing. Key Responsibilities Develop, maintain, and improve production test software using Python for LiDAR sensor and sub-assembly manufacturing. Serve as a working manager, providing technical leadership while contributing hands-on daily. Mentor and train Test Engineers on both technical and soft skills. Establish team priorities, KPIs, and work goals aligned with product development schedules and company objectives. Collaborate with cross-functional teams on software development, verification, and validation for new product introductions. Drive continuous improvement initiatives, including test time reduction, data quality enhancements, and production process optimization. Apply software engineering best practices, including coding standards, code reviews, source control management, CI/CD pipelines, and test automation. Communicate project updates, risks, and recommendations to management and stakeholders. Ensure timely completion of team deliverables and proactively address constraints or delays. Support contract manufacturing facilities with occasional travel (less than 10%). Work full-time onsite in San Francisco, CA. Qualifications and Skills Strong proficiency in Python development (minimum 5 years). Experience with CI/CD infrastructure, GitLab, Jenkins, and SQL database design. Strong skills in debugging, programming, data collection, and data analysis. Experience using project tracking tools such as Jira, Confluence, or equivalents. Proven ability to deliver results in a fast-paced engineering environment. Excellent organizational skills with the ability to manage multiple concurrent projects. Demonstrated people management or technical leadership experience (3+ years preferred). Experience working with high-precision electro-mechanical assemblies. Preferred: Experience developing test software for high-volume production and test equipment. Education BS in Computer Science, Mechatronics, Mechanical Engineering, or a related technical field required. MS degree preferred. Additional Information Background screening is conducted by the client. The Manufacturing group has zero tolerance for misdemeanor or felony theft or robbery offenses. This position is within an electrical component manufacturing environment (not medical devices). About Red Oak Technologies Since 1995, Red Oak Technologies has been a trusted partner in the technology industry, specializing in identifying and placing highly skilled contract, permanent, and project-based professionals. We value diversity and welcome applicants from all backgrounds and experiences. Red Oak Core Values: Relationships First | Exceptional Quality and Service | Unwavering Integrity and Trust | Be Easy To Do Business With | Respect Everyone

Waymo is an autonomous driving technology company with the mission to be the world's most trusted driver. Since its start as the Google Self-Driving Car Project in 2009, Waymo has focused on building the Waymo Driver-The World's Most Experienced Driver™-to improve access to mobility while saving thousands of lives now lost to traffic crashes. The Waymo Driver powers Waymo's fully autonomous ride-hail service and can also be applied to a range of vehicle platforms and product use cases. The Waymo Driver has provided over ten million rider-only trips, enabled by its experience autonomously driving over 100 million miles on public roads and tens of billions in simulation across 15+ U.S. states. Waymo Operations exists to deliver the Waymo Driver to the world. We are a global team building and scaling the world's first and leading autonomous fleet and operations platform. From component sourcing to end customer management, we enable and create value for Waymo through scaled and orchestrated deployment of the Waymo Driver. At Waymo, we are dedicated to building a culture that promotes inclusivity and celebration. We value diverse backgrounds, perspectives, and experiences; recognize that inclusive actions lead to equitable outcomes; and support and encourage all team members to share their ideas to help Waymo better serve the communities in which we operate. You will: Develop and maintain standard operating procedures, playbooks, and checklists based on safety, regulatory compliance, and program requirements. Monitor validation practices for adherence to quality standards, conduct audits and analyze feedback. Design and execute a formal change management process for all modifications to validation operations standards and procedures. Assess the impact of proposed changes on operations, safety, and project timelines. Develop clear communication plans and lead training efforts to ensure smooth transitions and universal adoption of new processes. Proactively identify potential risks associated with changes and develop robust mitigation strategies to minimize disruption to operations. Track key metrics related to performance and quality, analyze results, and use data-driven insights to drive continuous improvement. Conduct detailed process mapping of current workflows to identify inefficiencies and drive lean principles, ensuring consistency and repeatability of validation outcomes. Facilitate root cause analysis for process failures, and quality deviations to implement corrective and preventative actions to address underlying issues. You have: 7+ years of experience in program or project management, quality assurance, or process improvement within the automotive, aerospace, or a related high-growth tech company . Proven track record of successfully leading complex organizational change initiatives and implementing formal change control processes. Exceptional analytical and problem-solving skills with a meticulous attention to detail. Strong leadership, communication, and interpersonal skills, with the ability to influence and collaborate effectively with diverse cross-functional teams. Strong understanding of quality management principles, audit processes, and data analysis. Bachelor's degree in Engineering, Operations Management, Business Administration, or a related field. We prefer: Master's degree or relevant certifications (PMP, Lean Six Sigma Black Belt) preferred. In-depth knowledge of Quality Management Systems and process improvement methodologies (e.g., Lean Six Sigma). Experience in developing and implementing training programs, preferably in a technical or operational setting. #LI-Hybrid The expected base salary range for this full-time position across US locations is listed below. Actual starting pay will be based on job-related factors, including exact work location, experience, relevant training and education, and skill level. Your recruiter can share more about the specific salary range for the role location or, if the role can be performed remote, the specific salary range for your preferred location, during the hiring process. Waymo employees are also eligible to participate in Waymo's discretionary annual bonus program, equity incentive plan, and generous Company benefits program, subject to eligibility requirements. Salary Range$152,000-$192,000 USD

Do you want to change the world? Zipline is on a mission to transform the way goods move. Our aim is to solve the world's most urgent and complex access challenges by building, manufacturing, and operating the first instant delivery and logistics system that serves all humans equally, wherever they are. From powering Rwanda's national blood delivery network and Ghana's COVID-19 vaccine distribution, to providing on-demand home delivery for Walmart, to enabling healthcare providers to bring care directly to U.S. homes, we are transforming the way things move for businesses, governments, and consumers. The technology is complex, but the idea is simple: a teleportation service that delivers what you need, when you need it. Through robotics and autonomy, we are decarbonizing delivery, decreasing road congestion, reducing fossil fuel consumption and air pollution, while building a more resilient global supply chain. About You and the Role Are you a hands-on, systems-level thinker who thrives at the intersection of technical rigor, operational excellence, and team leadership? Do you love building and scaling quality systems that ensure products meet the highest standards of reliability, safety, and performance-without slowing innovation? As Head of Quality, you will lead Zipline's Quality organization-including our Quality Engineers and Quality Technicians-overseeing the end-to-end quality lifecycle across all feeder lines and top-level assemblies: aircraft, droid, and dock. You will own the quality strategy, execution, and continuous improvement across Incoming Quality Control (IQC), End-of-Line (EOL), and Outgoing Quality Control (OQC) processes to ensure every Zipline product meets the performance and reliability expectations required for global operations. This role is both strategic and deeply operational. You'll develop scalable quality processes, coach and empower a high-performing team, and use data to drive continuous improvement in first pass yield (FPY), cost of poor quality (COPQ), and field reliability. As a key manufacturing leader, you'll collaborate closely with Production, Manufacturing Engineering, Supply Chain, and Product Design to ensure quality is built into every stage-from supplier through shipment. You'll need to be comfortable operating in an ambiguous, rapidly evolving environment, balancing day-to-day problem solving with building long-term systems that will scale as Zipline grows globally. What You'll Do As Head of Quality, you'll define and drive Zipline's quality vision and roadmap across production and field operations. You'll empower your team to execute with precision, while building the systems, tools, and culture that enable sustained quality excellence. RESPONSIBILITIES: Lead and develop Zipline's Quality Engineering and Quality Technician teams, ensuring effective execution across IQC, EOL, and OQC functions. Define, implement, and continuously improve quality processes across top-level assemblies (aircraft, droid, dock) Establish and track key quality metrics including first pass yield, defect rates, rework hours, and field quality escapes (modifying these as scale changes) Drive cross-functional investigations for major production or field quality issues-owning containment, root cause analysis, corrective/preventive actions (CAPA), and communication to leadership. Drive PFMEAs for all products to be manufactured on the production lines to establish control plans and quality procedures Partner with Manufacturing Engineering, Supply Chain, and Product Design to implement design-for-quality (DFQ) and process control strategies that reduce variability and improve manufacturability. Oversee and optimize incoming inspection programs to ensure parts and subassemblies meet quality standards before entering production. Champion reliability improvement and validation testing at end-of-line to prevent downstream failures and quality escapes to the field. Own the overall Quality Management System (QMS) maturity roadmap-balancing rigor with practicality as the company scales. Lead continuous improvement initiatives focused on driving yield improvement, waste reduction, and process standardization. Build and foster a culture of accountability, root cause problem-solving, and pride in quality across the production floor. Serve as the senior quality voice in leadership reviews-providing transparency into risks, performance trends, and improvement priorities. Must Have Experience / Skill Sets 10+ years of experience in manufacturing quality, reliability, or production engineering, including 3+ years in a leadership role managing quality teams. Experience with scaling a quality system from low prototype production to low volume production (100/wk) to high volume production (1000s/wk) with complex electro-mechanical hardware (automotive, small aircraft, robotics, etc) Strong understanding of quality engineering tools and methodologies: PFMEA, control plans, and CAPA. Demonstrated success in scaling quality systems across complex electro-mechanical products. Hands-on experience in production environments managing inspection, testing, and validation activities. Proven ability to reduce quality escapes and improve first pass yield in high-mix, low- to mid-volume operations. Strong data analysis skills; comfortable using quality metrics to drive improvement and accountability. Experience collaborating closely with Manufacturing Engineering, Supply Chain, and Design Engineering teams to influence product and process quality. Excellent leadership and communication skills-capable of motivating teams and driving cross-functional alignment. Ability to balance hands-on problem solving with long-term strategic planning. Comfort operating in a fast-paced, ambiguous, and rapidly scaling environment. Nice to Have Experience in robotics or automotive manufacturing. Background in supplier quality and global production scaling. Familiarity with MES, ERP, and PLM systems for quality data traceability. Experience managing automated or semi-automated inspection systems. What Else You Need to Know Zipline is an equal opportunity employer and prohibits discrimination and harassment of any kind. We value diversity and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

ABOUT US AT KINDER'S: What's it like to work at Kinder's? Well, there's a lot of snacking and geeking out over what we all cooked over the weekend. But beyond that, there's also plenty of hard work. Because we don't just like flavor, we're obsessed with it. With over 100 products sold nationwide, we're now a top-five brand in multiple flavor categories at Costco, Walmart, Whole Foods, and more. But we're not your typical CPG company. Privately held and founder-led, we like to think of ourselves as a pirate ship in a sea of cruise ships. Our crew is adventurous and fearless. We chart our own course and chase big ideas to make food unforgettable. As we expand globally and approach $1 billion in revenue, we need other smart-and-scrappy, flavor-obsessed people to come aboard. If you're looking for a place where you can see the real impact of your work, this is it. Every day, you'll be part of a journey to add flavor to millions of meals and lives. How you'll have an impact at Kinder's: The Co-Manufacturing Quality Manager will be responsible for quality assurance at our co-pack partners for our high-growth flavor brand and will play a critical role in both defining and driving compliance with our high quality standards across our co-pack network. You will partner with Kinder's Co-Pack/Operations, Corporate Quality, and Product Development teams, to build an organization and processes that ensure Kinder's delivers high quality and amazing tasting products consistently while adhering to industry best practices for food safety and quality assurance. What are the Key Responsibilities of this Role: Quality Assurance Strategy and Execution - 35% Quality / Food Safety Procedures Work with internal and external teams to drive clear understanding of quality standards and establish robust capability to drive compliance with the goal of consistent quality attainment. Develop / implement continuous improvement program with collaboration with manufacturing partners to ensure consistent elevation of quality standards. Testing Program Evaluate / refine existing company testing procedures and work with internal stakeholders and manufacturing partners to develop robust, balanced program to ensure compliance with key standards. Process Development Collaborate with PD and manufacturing partners to evaluate process development opportunities to drive consistency in lot-level quality attainment. Consumer Quality Support Track / maintain database of consumer complaints or other quality issues. Identify trends in consumer issues and, where applicable, develop corrective action plans for vendor partners or work with internal PD team to develop reformulation strategies. Co-Manufacturing Management; Audit / Compliance - 35% Refine company audit process / manuals and develop clear, effective communication strategy with key manufacturing partners. Collaborate with operations / PD teams to evaluate new manufacturing partners and, where applicable, develop remediation / process improvement programs to ensure compliance with company standards. Maintain audit / regulatory / and SOP tracking systems for manufacturing partners to ensure all documentation is current and compliant with company and / or regulatory standards. Oversee testing at co-packers to ensure products are free of defects and in compliance with quality standards. Participate in investigations, identify quality issues, and create Corrective and Preventative Actions (CAPAs). Develop annual / quarterly vendor business reviews to highlight quality trends and key areas for improvement. Regulatory / Documentation - 15% Monitor FDA /USDA regulatory activities and plant compliance with regulatory standards and act as a liaison for all manufacturing locations, ensuring regulatory compliance within the business unit. Work with PD to catalog robust item specifications and ensure that manufacturing partners are delivering consistent compliance with established standards. Cross-Functional Partnership - 15% Lead cross-functional team to ensure quality standards while also achieving aggressive commercialization timelines. Drive clear cross-functional understanding of key quality issues / drivers and help team make intentional, active trade-offs to balance quality, brand, and commercial objectives. Identify any sources of food safety risk and drive clear organizational understanding and alignment on how to achieve “zero-tolerance” standard. Identify key sources of business risk from quality issues (e.g. variance in appearance, flavor profile, packaging look / feel) and highlight trade-offs to senior management. What You Bring to the Table Education / Experience B.S. in Food Science or related field preferred; A.S required. PCQI & HACCP required, Better Process Control School (Acidified Food School) preferred. 7+ years relevant work experience in FS/QA/QC in CPG Food and Beverage industry. Advanced level food safety technical knowledge, including demonstrated knowledge of microbiology, allergens, FSMA and other food regulations. Experience in innovation and/or product development is a plus. Experience with food audit procedures and systems (e.g. BRC, SQF, Tracegains) strongly preferred. Track record in agile creative thinking, generation of standards / processes, and working with internal and external partners. Collaborative business partner with a track record of helping internal and external stakeholders identify win-win solutions and driving alignment around best course of action and accountability for delivering committed outcomes. Proven strategic thinker excited by a dynamic, highly innovation-focused model. Strong analytical & quantitative acumen with ability to collect and use data to drive better, faster decision-making. Strong project management skills and understanding of new product development process from ideation to execution. Personal Characteristics Business builder who owns and drives results. Growth mindset with an excitement to learn (and teach). Thrive in a dynamic, lean, and agile environment with proven record of completing projects on time in full through excellent cross functional team management, leadership, communication and influence. Self-starter who takes initiative and speaks their mind. Excited to be part of a fast-moving team with the ability to be a leader and a follower. Enjoy making decisions and finding ways to say ‘yes' as often as possible to impactful and important priorities. Things About the Way We Work No two days here are the same. We try to be good team members and good communicators, but we don't live by hierarchy and structure - everyone is a difference maker here. We make a lot of decisions in the face of incomplete information - our team embraces ambiguity and tries to make good decisions fast rather than great decisions slow We believe our job is to take smart risk, not to eliminate risk. We believe in growing our skills and becoming a better company with more managerial expertise, but we are an entrepreneurial company at heart. We aren't trying to be average - we want to do exceptional things and we are willing to work hard to achieve them. Location & Travel The position will be based out of our 20,000 sq. foot office in Walnut Creek, CA. We strongly believe in the power of culture and community and have a hybrid work structure with 4 days in the office on a weekly basis to encourage collaboration and personal connections that will allow us to better serve our customers and consumer and to have more fun. We have 1 flex day per week with employees having the opportunity to choose to be either in the office or to work from home based on what makes most sense for them. Travel approximately 50% to co-manufacturing partners and industry conferences. The expected starting salary range for this role is $120,000- $140,000 per year. We may ultimately pay more or less than the posted range based on the location of the role. The amount a particular employee will earn within the salary range will be based on factors such as relevant education, qualifications, performance and business needs.

Shift: Monday - Friday; 8:00am - 5:00pm PT Hybrid 1: This role requires associates to be in-office 1 day per week, fostering collaboration and connectivity, while providing flexibility to support productivity and work-life balance. This approach combines structured office engagement with the autonomy of virtual work, promoting a dynamic and adaptable workplace. Internal candidates may be considered with a confirmed virtual exception on file. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law The Clinical Quality Program Manager is responsible for serving as a liaison with and overseeing the quality improvement activities/projects/programs for one or more states within a major line of business. How you will make an impact: Leads state change to health plan level quality strategy meetings, develops a quality plan, and ensures integration of quality into the overall business process. Works with the clinical intervention team to design studies to identify barriers to medical interventions. Ensures that study methodology is sound and appropriate reporting is in place. Develops performance improvement plans and oversees the clinical quality improvement activities/projects to improve the quality of care for members. Assures compliance with corporate QI work plans. Assures that all QI activities are relevant to the needs of targeted population. Maintains effective documentation of research programs to meet regulatory and Accreditation Standards. Provides oversight to assure accurate and complete quantitative analysis of clinical data and presentation of data analysis results. Participates in and provides input to the development of new product designs for major line of business. Oversees the implementation of new initiatives. Leads interactions with regulators or oversight entities. Oversees quality improvement activities for the largest, most complex state programs. Minimum Requirements: Requires a BS in health administration, nursing, or a related clinical field; 4 years of health care quality or data analysis experience; or any combination of education and experience, which would provide an equivalent background. Preferred skills, capabilities, or experiences: Current unrestricted license, certification in applicable field (i.e. CPHQ) and/or a MS in the health field (i.e. Nursing) is preferred. Intermediate Excel and PowerPoint skills Prior experience with HEDIS and NCQA Health Plan Accreditations For candidates working in person or virtually in the below location(s), the salary* range for this specific position is $95,680.00 to $149,760.00 Locations: California In addition to your salary, Elevance Health offers benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). The salary offered for this specific position is based on a number of legitimate, non-discriminatory factors set by the Company. The Company is fully committed to ensuring equal pay opportunities for equal work regardless of gender, race, or any other category protected by federal, state, and local pay equity laws . * The salary range is the range Elevance Health in good faith believes is the range of possible compensation for this role at the time of this posting. This range may be modified in the future and actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. Even within the range, the actual compensation will vary depending on the above factors as well as market/business considerations. No amount is considered to be wages or compensation until such amount is earned, vested, and determinable under the terms and conditions of the applicable policies and plans. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. Job Level: Non-Management Exempt Workshift: 1st Shift (United States of America) Job Family: QLT > Clinical Quality Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

Who We Are Noah Medical is building the future of medical robotics. Our next generation robotic platform targets early diagnosis and treatment of patients across multiple indications. We are looking for exceptional engineers and key team members. Our incredibly talented team of engineers, innovators, and industry leaders bring years of experience from the top healthcare companies in the world, including: Intuitive, Auris, Stryker, Johnson & Johnson, Boston Scientific, Verb Surgical, Mako, Think Surgical, Medrobotics, and Hansen. We are looking for talented, motivated and ambitious team members to revolutionize robotic surgery. A Day In The Life Of Our Sr. Product Quality Engineer at Noah Medical Able to lead efforts into the investigation of returned field devices, including flexible endoscopes, disposable devices, and capital devices/equipment Take the lead on methodical root cause analysis projects. Document the findings in clearly written reports/presentations Review engineering drawings, understand their impact on parts received, and propose opportunities for design improvements Design of test methods and fixtures in order to facilitate efficient study of returned devices Mentor less experienced engineers in the process of effective root cause analysis. Collaborate with design, manufacturing, and quality teams to drive consistent, high-quality parts and assemblies About You B.S. or M.S. in mechanical engineering or related engineering discipline Min 7 years of experience in the medical device industry Demonstrated history of applying creative problem solving ability to difficult technical problems At least 5 years of leading root cause efforts of clinical context and use of medical devices Ability to manage and analyze large sets of data and effectively communicate results of data analysis. Proficient in use of CAD Experience assessing products produced by various fabrication methods used in single use, complex medical devices(e.g. machining, plastic injection molding, MIM, laser cutting, stamping, rapid prototyping). Demonstrated ability to work and mentor successfully in a team environment. Demonstrated strong project management skills. Eagerness to learn and to contribute to state of the art technology #LI-Hybrid Pay Transparency The Pay Range for this position is listed. Noah Medical offers a comprehensive benefits package including: competitive pay, health insurance, 401K and stock purchase plans, tuition reimbursement, paid time off plus holidays, and a flexible approach to work with remote, hybrid, field or office work schedules. Actual pay will be adjusted based on an individual's skills, experience, education, and other job-related factors such as location as permitted by law. Total compensation may also include additional forms of incentives. California Pay Range$120,600-$150,800 USD Benefits & Perks (For Full Time Employees): Competitive Salary Comprehensive health insurance including Medical, Dental and Vision + HSA and FSA options Equity & Bonus Program Life Insurance (company paid & supplemental) and Disability insurance Mental health support through medical insurance programs Legal and Pet Insurance 12+ paid holidays, 15-20 days of PTO + sick time Paid parental leave In-office snacks and beverages In-office lunch stipend Learning & Development Opportunities: On-demand online training and book reimbursement Team building and company organized social and celebration events Noah Medical may offer remote, hybrid, or onsite work arrangements within the state of California depending on the specific team and/or role where applicable. Noah Medical is an Equal Opportunity Employer. We celebrate diversity and are committed to ensuring an inclusive environment for our employees. Applicants are considered for all positions without regard to race, color, religion, sex or gender, gender identity or expression, sexual orientation, national origin, ancestry, age, genetic information, physical or mental disability, marital or protected military or veteran status, or any other consideration made unlawful by federal, state or local laws. Please visit our Careers Page to view our latest openings. NO AGENCIES PLEASE - Please do not outreach to any managers or submit any resumes without a signed agreement from Talent Acquisition. Resumes shared with anyone at Noah Medical without a signed agreement will be considered your gift to us and no fee will be paid.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Collins Aerospace is seeking a results-driven and detail-oriented Senior Product Quality Engineer to join our Product Quality team in Fairfield, CA. This key engineering role is responsible for leading the evaluation and disposition of nonconforming material from production, receiving inspection, and final inspection, ensuring swift resolution through effective Material Review Board (MRB) processes. As a Senior Product Quality Engineer, you will collaborate with cross-functional teams-including Manufacturing, Engineering, Supplier Quality, and Procurement-to analyze quality issues, drive root cause and corrective actions, and continuously improve product quality and process performance. You will monitor and drive improvements in key performance indicators (KPIs) such as scrap rates, rework, and first-pass yield. This position also plays a leadership role in closing out quality notifications and corrective action requests (CARs) and participating in Quality Clinic activities and continuous improvement initiatives. As an employee at Collins Aerospace-Fairfield, Safety is an expectation. Employees are expected to work safely, follow all safety rules, requirements, procedures, and instructions always. You are expected to actively participate in the safety program and be mindful of your safety and the safety of others. You are expected to complete all safety training in a timely manner. What You Will Do Lead or participate in MRB (Material Review Board) activities to evaluate and disposition discrepant material from production and inspection. Analyze nonconforming material data and coordinate timely and accurate dispositions in accordance with internal procedures and regulatory standards. Manage and monitor quality notifications, ensuring closure through thorough documentation, root cause analysis, and follow-up actions. Collaborate with Engineering, Supplier Quality, and Operations teams to resolve quality issues impacting production flow and product conformity. Drive and close assigned Corrective Action Requests (CARs) by leading root cause investigations and ensuring effectiveness of implemented solutions. Monitor and report on KPIs including scrap, rework, defect trends, and quality notification aging; identify areas for improvement and recommend actions. Participate in and support Quality Clinic activities to triage quality issues and escalate concerns as needed for cross-functional resolution. Support and lead process improvement projects targeting quality, yield, and operational efficiency. Identify systemic issues and work cross-functionally to implement preventive actions. Contribute to internal audits, regulatory compliance efforts, and risk mitigation activities. Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 5 years prior relevant experience or an Advanced Degree in a related field and minimum 3 years of experience. Must have the ability to obtain and maintain Alcohol, Tobacco, Firearms and Explosives (ATF) access. MRB processes, nonconformance management, and RCCA (Root Cause & Corrective Action) Experience with data analysis and reporting Excellent written and verbal communication skills, with ability to engage cross-functional teams effectively Qualifications We Prefer Master's degree in Engineering or related field Experience in aerospace, defense, or regulated manufacturing environments Familiarity with SAP, PLM systems (e.g., Windchill), and QMS tools Knowledge of quality standards such as AS9100, ISO 9001, and regulatory compliance frameworks Experience with Lean, Six Sigma, or other structured continuous improvement methodologies What We Offer Benefits Some of our competitive benefits package includes: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program Eligible for relocation assistance And more! Eligible for relocation. Learn More & Apply Now! Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. Role Type *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. The salary range for this role is 90,000 USD - 182,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you'll share in our pride and purpose that affects the lives of millions around the world! The Product Quality Engineer for the Airfoil Castings manufacturing process will drive product qualifications and quality improvements for key performance indicators (KPIs) of suppliers within the Airfoil Castings supply chain including quality plan implementation. The PQE, will own supplier First Article Inspection results and drive supplier compliance to Source Substantiation Plans or design intent verification. Provide supplier product release direction when part approval cycles are not complete while also being the internal quality focal for those parts. Collaborate with Supplier Quality, Supplier Quality Operations and New Product Introduction / Management of Change teams as required- this collaboration may include onsite visitation. In this role, you will also understand how the team integrates with other teams outside of Quality to meet short term and long term the business objectives. Demonstrate an in-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area. **Job Description** **Roles and Responsibilities** + Role is responsible for supplier processes, from initial qualification, maintenance, and necessary improvement driven by business quality needs. + Product Quality Engineer will have a technical understanding of engineering drawings and will have the ability to manage suppliers and/or quality projects related projects. + Develop in-depth knowledge of a discipline. Use prior experience and acquired expertise to execute functional policy/strategy. + Communication with direct colleagues and the business on the status of First Article Inspection and Source Substantiation Plans. + Provide onsite support at suppliers, as needed ( **approximately 15% travel** ) + Collaboration with other Engineering, Quality, and Sourcing functions to ensure joint success + Impacts projects, processes, and procedures in own field. The role operates with some autonomy but is focused on execution of activities/provision of advice within an enabling discipline covered by standard functional practices and procedures. Activities require professional judgment but may require more senior levels of guidance. + Utilizes technical expertise and judgement to solve problems. Leverages technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. + Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology, or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Able to offer new solutions to problems outside of set parameters and can construct and provide recommendations. Uses multiple internal and some external sources outside of own function to help arrive at a decision. + May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. Communicates difficult concepts and may influence others' options on specific topics. May guide others to consider a different point of view. **Required Qualifications** + Bachelor's Degree from an accredited college or university (or a high school diploma/GED with 4 years' experience in Engineering, Materials Science or Quality related roles) + Minimum of 3 years of experience in Engineering, Materials Science or Quality related roles **Desired Characteristics** + Demonstrated experience in manufacturing or supplier quality. + Strong communication skills. + Demonstrated ability to analyze and resolve problems. + Ability to document, plan, market, and execute programs. + Established project management skills. + Demonstrated history of problem solving, root cause and corrective action methodology, data analysis, statistical analysis and quality experience. + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative + Problem solver: analytical-minded, challenges existing processes, critical thinker + Demonstrated Airfoil Casting manufacturing knowledge and experience is advantageous to the role. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. The base pay range for this position is 100,000.00 - 115,000.00. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on **November 30th, 2025.** _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Design Quality Technician The Design Quality Technician -CMF will report to the Design Quality Team Lead and will be responsible for ensuring the visual and aesthetic quality of CMF (Color, Material, Finish) components meets design intent and defined quality standards. This role plays a key part in maintaining the highest quality standards for interior and exterior appearance parts through inspection, documentation, and continuous improvement activities. The technician will support the Design Quality and receiving organization by performing detailed color and material inspections, verifying visual harmony across components, and coordinating with suppliers and cross-functional teams to resolve quality issues and uphold brand standards. In this role, you will: Perform visual inspections of CMF parts to ensure compliance with specifications and design intent. Evaluate color, texture, gloss, and material harmony across multiple materials and components. Identify, label, and organize CMF samples and parts for inspection and shipment. Support supplier quality by returning nonconforming samples and documenting findings. Maintain inspection records, images, and data within Google Sheets, Docs, and shared databases. Collaborate with Design, Manufacturing, and Supplier Quality teams to resolve appearance-related issues. Utilize tools such as spectrophotometers or colorimeters to quantify color differences when applicable. Support root cause analysis and corrective action validation related to visual or CMF quality concerns. Qualifications: Bachelor's with 6-8 years of experience in a manufacturing or quality environment (automotive industry preferred). Demonstrated experience in color discrimination and color harmony evaluation. Ability to evaluate and compare color across multiple materials (plastic, metal, fabric, paint, etc.). Ability to lift to 50 pounds. Strong attention to detail and visual accuracy. Experience with basic data entry and documentation using Google Docs, Google Sheets, and other digital tools. Excellent organizational skills and the ability to manage multiple tasks with minimal supervision. Preferred Qualifications: Hands-on experience using spectrophotometers or colorimeters. Experience organizing and managing CMF sample libraries. Familiarity with automotive design quality or CMF processes. Goal-oriented mindset with strong communication and teamwork skills. Experience working with cross-functional teams including design, quality, and manufacturing. Previous experience in SAP and/or JIRA system Schedule: Monday to Friday from 8am - 5pm

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

Full-time Description To assist in Inspection Lab activities allowing it to perform seamlessly while providing accurate, repeatable measurement results that fully support the needs of our internal and external Customers Requirements 1) Working with peers to help coordinate and schedule Inspection Lab functions so all requirements are accomplished in the most efficient manner possible. 2) Perform first piece, in-process, and final inspections and document as required 3) Program and operate the CMM & Faro Arm 4) Crosstrain on all lab equipment to have a functional knowledge and operational ability of the equipment listed above 5) Be a subject matter expert on the use of all conventional measuring equipment, ability to design and develop specialty gauging, along with a highly developed understanding of GD&T 6) Work with the QA Manager and Quality Engineer and other Inspectors to perform capability studies, Gauge R&R studies, and other statistical techniques. 7) Supply the necessary data for AS9102 and PPAP submissions. 8) Assist in calibration activities to ensure all are accomplished as scheduled Research, and suggest upgrades/alternatives/additions to the existing lab equipment while also justifying the procurement by demonstrating the appropriate ROI