Quality engineer jobs in Overland Park, KS - 203 jobs

Responsibilities: * Review and evaluate Quality Documents, ensuring that all documents are applicable to current standards & procedures and properly represent current manufacturing processes and procedures. * Ensure procedures are being followed for the following processes: * Creation of Manufacturing Inspection Reports (MIR) for all parts and assemblies. * First Article Inspections (FAI) * In Process Inspections * Internal, Customer, Supplier and other third-party audits * Final Inspection Reports * Inspection and receipt of all incoming parts and material (raw material, hardware, supplies, and parts returning from outside processing). * Review and approval of vendor certifications and inspection processes. * Generate and complete "Corrective Action Reports" (CAR) in a timely manner; also ensure that the corrective actions are incorporated back into the Manufacturing Process Plans (MPP) and Manufacturing Inspection Reports (MIR) * Lead quality initiatives including any actions or audits required. * Establish inspection training programs and growth opportunities that appropriately reach each person within quality. The goal is to improve skill sets and the ability to be cross-functional within the quality assurance organization. * Take the lead in understanding "form, fit, and function" of products and parts that we manufacture and assemble. Identify 'grey area" questions and work with all departments, customers, and sister companies to identify solutions and outcomes that are satisfactory to all parties. * Follow up on corrective actions with verification and validation. Resolve quality and process issues. * Enhance and improve methods for inspection, testing, sampling, and training. * Assist in other areas or perform other duties as required by business demands. * Maintains safe and clean work environment; maintaining compliance with established policies and procedures * Perform other duties as assigned by supervision.

**Requisition ID:** 178381 **Job Level:** Senior Level **Home District/Group:** TIC Power District **Department:** Quality **Market:** Power **Employment Type:** Full Time We are seeking a highly experienced Quality Assurance Manager to lead and oversee quality systems and auditing programs across complex projects in the Solar, Natural Gas, and Oil/Gas sectors. The ideal candidate will have 15+ years of experience in quality auditing, including a strong command of NQA-1 standards and a current NQA-1 Lead Auditor certification. This role is critical in ensuring compliance with industry regulations, client specifications, and internal quality standards. **District Overview** The TIC Power division operates as a key part of Kiewit Corporation, delivering expert construction services for power generation projects with a skilled non-union workforce. Specializing in cogeneration, combined-cycle, geothermal, and waste-to-energy facilities, TIC Power is recognized for its robust estimating capabilities and comprehensive project planning. Our team constructs major EPC power plant projects across North America, emphasizing quality construction practices and sustainable energy solutions. **Location** This role will be based out of our office in Lenexa, KS, but will have temporary assignment locations. Candidates must be prepared to travel extensively and temporarily relocate to different project sites as required. Adaptability to different climates and work environments is essential, as the PQM will have direct access and oversight responsibilities across all areas of the construction site to ensure quality assurance and control standards are met throughout the project lifecycle. **Responsibilities** + Develop, implement, and maintain Quality Assurance Programs aligned with NQA-1, ISO 9001, and industry-specific standards. + Lead and conduct internal, external, and supplier audits across Solar, Natural Gas, and Oil/Gas projects. + Ensure compliance with federal, state, and client-specific quality requirements, including DOE, FERC, and API standards. + Manage and mentor a team of QA professionals and auditors across multiple project sites. + Collaborate with engineering, construction, and operations teams to integrate QA processes into project execution. + Oversee the development of audit schedules, execution of audits, and follow-up on corrective and preventive actions (CAPA). + Maintain and analyze quality metrics and reporting systems to identify trends and drive continuous improvement. + Serve as the primary point of contact for client and regulatory quality audits and inspections. + Support supplier qualification and surveillance activities. + Ensure proper documentation, traceability, and retention of quality records. \#LI-CB1 **Qualifications** + 15+ years of experience in quality assurance and auditing within the Solar, Natural Gas, and Oil/Gas industries. + Certified NQA-1 Lead Auditor (active and current). + Strong working knowledge of NQA-1, ISO 9001, API, ASME, NEC, and other relevant standards. + Proven ability to lead cross-functional teams and manage quality programs across multiple projects. + Excellent communication, analytical, and problem-solving skills. + Proficiency in QA software, audit tools, and reporting platforms. + Bachelor's degree in Engineering, Quality Management, or related field (preferred). Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC

COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to solving technology challenges for a sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fueled by performance and expertise, leading the charge in innovation, efficiency and delivering world-class customer service. Be part of the journey. Role Overview and Responsibilities This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., "Green Card Holder"), Political Asylee, or Refugee. Introduction The Quality Manager, in conjunction with the Operations Leaders, will ensure that Value Stream Managers, Team Leaders, and Production Leads across shifts, will hold delegated responsibility for ensuring product quality and shall have the authority to stop production to correct quality Programs. (S)he will develop and lead a team of Quality Engineers, Quality Technicians and Quality Inspectors and is the management representative for all Quality Management Systems, i.e., Mil STD, AS9100, FMEA, ARQP, PPAP, and MSA. Key Responsibilities Meeting departmental targets and objectives cascaded from business plan. Setting departmental personal targets and objectives. Meeting all relevant departmental KPIs. Maintenance of system and product approvals. Maintenance of product test regime. Review and control of personnel in department to meet ongoing requirements. Encouraging, monitoring and reporting on all continuous improvement programs active at the site. Management of supplier development function and focusing on supplier development in cost, quality and delivery. Review of customer satisfaction indicators and adoption of preventive techniques to improve. Documentation control within area. Test results, drawings, etc. Working within other areas of the Quality department, as required. Ensuring the maintenance of product quality with agreed standards. The Quality Manager has the authority and responsibility to stop production to correct quality problems. PPM Reduction including reduction in customer returns and scrap/waste reductions. Yield improvements. The Quality Manager has the ability to influence a culture in which manufacturing embraces the quality versus the Quality Department is solely responsible. Qualifications, Skills and Attributes Core Requirements Technical leadership. Ability to present in a group to internal and external stakeholders. Strong communication and auditing skills (can look for and identify issues). Bias toward execution/sense of urgency. Data driven. Analytical problem solver. Essential job functions must be performed with our without reasonable accommodation. TT Electronics will engage in an interactive process to support qualified individuals as needed. Desireable Skills and Experience Bachelors Degree in Engineering, Quality or a related field. At least five years experience in manufacturing, preferably gained in a similar industry. Experience in AS 9100, FMEA, APQP, PPAP, and MSA. Six Sigma Black Belt preferred. Quality Management Systems experience preferred. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., "Green Card Holder"), Political Asylee, or Refugee. Solving Technology Challenges for a Sustainable World We want the very best people in our TT family across the globe - so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds and identities. We are committed to equality of opportunity for all and you can rest assured that TT Electronics takes positive steps to ensure we are an inclusive business, that will welcome and support you, from your initial application to wherever your career takes you! Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you. #WeAreTT #BeMeAtTT

Piston Automotive is HIRING a Quality Manager for our North Kansas City, MO facility The Quality Manager provides leadership to the Quality department and plant quality processes and procedures. Plans, coordinates, and directs quality control program designed to ensure continuous production of products consistent with established standards by performing the following duties personally or through subordinate supervisors. Interprets quality control philosophy to key personnel in organization. Acts as a Management Quality Representative for the company in any decision-making process that will have an impact on the customer's interests. Coordinates objectives with production procedures in cooperation with other plant managers to maximize product reliability and minimize costs. Provides inspection activity for product throughout production cycle. Applies total quality management tools and approaches to analytical and reporting processes within each department. Directs workers engaged in inspection and testing activities to ensure continuous control over materials, facilities, and products. Plays active role on quality management teams within organization. Investigates and adjusts customer complaints regarding quality. Works with vendors to insure quality of all purchased parts for company use. Work with purchasing staff to establish quality requirements for external suppliers. Maintain awareness of business context and company profitability. Analyze performance data and charts against defined parameters. Supervises Quality Supervisor, Quality Engineers, Quality Techs. Piston Automotive wasn't just founded to make things. It was founded to make things better. And that begins with building better teams solely dedicated to achieving excellence at every level of execution through a combination of experience, expertise, and a deep seeded passion for what we do. Our assemblies consistently set the standard because our people consistently raise the bar. Why Piston Automotive? Competitive Wages, Paid Holidays & Vacation, Medical & Rx Plans, Dental & Vision Plans, Flexible Spending Accounts, Health Savings Accounts, Employee Assistance Program, Life & Disability Coverage, 401K with Company Match, Tuition Reimbursement , Vehicle and Product Discounts Responsibilities Develops and analyzes statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished product. Formulates and maintains quality control objectives complementary to corporate policies and goals. Creates and implements inspection criteria and procedures. Creates and directs environmental test functions. Designs and implements quality control training programs to key personnel in conjunction with managers. Analyze Production Parts Approval Processes and Advance Product Quality Planning. Analyze Quality Systems (e.g. TS 16949 and ISO 9001) Provides an in depth understanding of Cost of Quality. Manage the quality inspection and product release programs for incoming and in process material and components processes and finished goods. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications Bachelor's degree in Engineering, Quality Control or a related field. Eight (8) years of experience as a Quality Manager or Quality Supervisor Eight years of experience in the application of advanced quality tools including SPC, RCCA (Root Cause Corrective Action; i.e. 8D, 5-Why, A3's, or other formats), DOE, Control Plans, MSA/GR&R, PFMEA, and deployment of these tools in continuous improvement initiatives. Six (6) years of negotiation experience. A minimum of 5 years of experience utilizing Microsoft Office Products. Piston Automotive, part of the Piston Group family of companies, is an equal opportunity employer, dedicated to fostering a diverse and inclusive workplace that values the unique contributions of every employee. We encourage all candidates to apply for positions that match their skills and capabilities, ensuring equal consideration without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. For any questions regarding job opportunities or the application process, please reach out to us at *********************************. We are committed to providing accommodations for individuals with disabilities during the job search and application process, reinforcing our commitment to inclusivity for all job seekers.

Splintek is a Lenexa based, made in the USA manufacturing company in the business of providing high-quality healthcare products to Retailers, Professionals and direct to consumers since 1996. Innovation, team-based, high energy, casual business environment. Splintek's mission is to enhance the quality of life globally by innovating healthcare products for better sleep, more comfort, and overall health. Please visit our website at ****************** Splintek offers Competitive Wages and Benefits, including: Medical Insurance Dental Insurance Vision Insurance 401(k) Match Paid Time Off Paid Holidays Casual Dress/ Atmosphere New Facility Workout Room on Site This position is full time on-site, we are not offering hybrid, remote, or flex schedules at this time. PRIMARY OBJECTIVE OF POSITION Perform standardized qualitative and quantitative tests to determine the physical or chemical properties of various materials to ensure compliance with company and government standards, assure regulatory compliance, and research and development of new products. DUTIES AND RESPONSIBILITIES / ESSENTIAL FUNCTIONS Supervise and review analytical work, research projects, and production formulations and products Contribute to the development and successful launch of our new products Adhere to all GMP/GLP requirements Creatively devise test methods for new product evaluation Maintain stability programs to optimize product formulas and specialized packaging configurations Coordinate and review out-sourced testing with research organizations Maintain calibration program for lab instruments and production scales Ensure company compliance with EPA, FDA, and OSHA regulations Perform Quality Control testing on raw materials, intermediate, and finished products using established analytical procedures Recommend changes or adjustments to operations for the purpose of improving or correcting product blends Properly document results and assist in the development and improvement of laboratory SOPs and the maintenance of the quality assurance system Update and maintain all laboratory databases with new results for record keeping and report generation Make safety a priority consideration with all actions taken and ensure that safe work practices are followed and adhered to Injection molding processing, training, and support QUALIFICATIONS EDUCATION REQUIRED: Bachelor's degree in Chemistry, Polymer Chemistry, or related field EXPERIENCE AND SKILL REQUIRED: 3 years of laboratory and quality assurance experience Familiarity with ASTM and ISO test methods Good working knowledge of analytical chemistry Excellent oral and written communication skills Proficient in spoken and written English Microsoft Office? PREFERRED: Familiar with injection molding processing, thermoplastic polymers, and polymer chemistry Familiarity with thermoplastic molding and part production Familiarity with ICH guidelines and cGMP and GLP regulations Familiarity with FDA regulations for medical devices. Instrumental analysis, including GC and GC-MS (HS-GC-MS preferred), DSC, FTIR, optical profilometry and optical microscopy WORK ENVIRONMENT AND PHYSICAL DEMANDS Vision: Use vision to read, write, type, operate office, electronic, and manufacturing equipment, and make fine adjustments. Speaking/Hearing: Give and receive information through speaking and hearing. Motor Coordination: Requires hands to operate equipment. Lift/Carry: Regularly lift, push, and move up to 50lbs. Environment: Office and warehouse environments may be dust, contain sharp edges, include areas that are not well lit, the floor may be uneven or cracked, and the facility may be subject to variations in temperature. Search Firm Representatives - Please read carefully Splintek does not accept assistance from search firms. Please, no phone calls or e-mails. All resumes sent by search firms to any employee at Splintek via e-mail, internet or in any form and/or method without valid written search agreement in place for this position will be deemed the sole property of Splintek. No fee will be paid in the event the candidate is hired by Splintek as a result of the referral or any other means. Thank you for your cooperation.

Splintek is a Lenexa based, made in the USA manufacturing company in the business of providing high-quality healthcare products to Retailers, Professionals and direct to consumers since 1996. Innovation, team-based, high energy, casual business environment. Splintek's mission is to enhance the quality of life globally by innovating healthcare products for better sleep, more comfort, and overall health. Please visit our website at ****************** PRIMARY OBJECTIVE OF POSITION Perform standardized qualitative and quantitative tests to determine the physical or chemical properties of various materials to ensure compliance with company and government standards, assure regulatory compliance, and research and development of new products. DUTIES AND RESPONSIBILITIES / ESSENTIAL FUNCTIONS Supervise and review analytical work, research projects, and production formulations and products Contribute to the development and successful launch of our new products Adhere to all GMP/GLP requirements Creatively devise test methods for new product evaluation Maintain stability programs to optimize product formulas and specialized packaging configurations Coordinate and review out-sourced testing with research organizations Maintain calibration program for lab instruments and production scales Ensure company compliance with EPA, FDA, and OSHA regulations Perform Quality Control testing on raw materials, intermediate, and finished products using established analytical procedures Recommend changes or adjustments to operations for the purpose of improving or correcting product blends Properly document results and assist in the development and improvement of laboratory SOPs and the maintenance of the quality assurance system Update and maintain all laboratory databases with new results for record keeping and report generation Make safety a priority consideration with all actions taken and ensure that safe work practices are followed and adhered to Injection molding processing, training, and support Requirements EDUCATION REQUIRED: Bachelor's degree in Chemistry, Polymer Chemistry, or related field EXPERIENCE AND SKILL REQUIRED: 3 years of laboratory and quality assurance experience Familiarity with ASTM and ISO test methods Good working knowledge of analytical chemistry Excellent oral and written communication skills Proficient in spoken and written English Microsoft Office? PREFERRED: Familiar with injection molding processing, thermoplastic polymers, and polymer chemistry Familiarity with thermoplastic molding and part production Familiarity with ICH guidelines and cGMP and GLP regulations Familiarity with FDA regulations for medical devices. Instrumental analysis, including GC and GC-MS (HS-GC-MS preferred), DSC, FTIR, optical profilometry and optical microscopy **We are NOT interested in working with recruiters or employment agencies at this time. Please do not email about potential candidates. WORK ENVIRONMENT AND PHYSICAL DEMANDS Vision: Use vision to read, write, type, operate office, electronic, and manufacturing equipment, and make fine adjustments. Speaking/Hearing: Give and receive information through speaking and hearing. Motor Coordination: Requires hands to operate equipment. Lift/Carry: Regularly lift, push, and move up to 50lbs. Environment: Office and warehouse environments may be dust, contain sharp edges, include areas that are not well lit, the floor may be uneven or cracked, and the facility may be subject to variations in temperature.

Job Description Our client is seeking a highly skilled and experienced Quality Manager to oversee and enhance their quality management system in line with AS9100 standards. The ideal candidate will have a proven track record in quality assurance within the aerospace & defense sector and possess strong leadership abilities to guide our quality team towards achieving operational excellence. Key Responsibilities: - Develop, implement, and maintain the company's quality management system to ensure compliance with AS9100 standards. - Lead internal and external audits to ensure adherence to quality standards and regulatory requirements. - Collaborate with cross-functional teams to establish quality objectives and targets. - Analyze quality performance data to identify trends and areas for improvement. - Provide leadership and guidance to quality assurance staff, fostering a culture of continuous improvement. - Develop and implement quality control procedures to ensure product and process integrity. - Lead root cause analysis and corrective action processes to resolve quality issues. - Liaise with customers, suppliers, and regulatory bodies on quality-related matters. - Prepare and present quality reports to senior management. - Stay current with industry best practices, technological advancements, and regulatory changes. Qualifications: - Bachelor's degree in Engineering, Quality Management, or a related field. - Minimum of 5 years of experience in a quality management role, preferably within the aerospace industry. - In-depth knowledge of AS9100 standards and quality management systems. - Proven experience with quality assurance methodologies, tools, and techniques (PPAP, APQP, etc) - Strong leadership and team management skills. - Excellent problem-solving and analytical skills. - Effective communication and interpersonal skills.

Job Description McFarlane is a rapidly growing 50+ years old aviation firm that focuses on the design and manufacture of high-quality aircraft parts within the general aviation and commercial marketplace. We believe in providing better parts with superior “old-school” customer service. When you join the McFarlane team, you'll join a dedicated group of colleagues passionate about aviation, community, and the McFarlane way. Position Description: Quality Inspector How You Will Make an Impact: As a Quality Inspector, you will perform preliminary and in-process inspections of aircraft related components. To excel in this role, applicants should be able to show great attention to detail, possess strong organizational skills, and be able to demonstrate the ability to interpret approved data. When You Will Work: Monday through Friday, full-time position with flexible 1st shift hours. Operational Duties: Perform preliminary, in-process and final dimensions inspections Demonstrate the ability to interpret approved data sch as engineering drawings and specifications. Documenting inspection results by completing logs and reports Communicate with production, engineering and quality team Inspecting aircraft components to verify correct finish, configuration or other measurable or observable characteristics Performing and recording first article inspections in accordance with standards Establish quality standards for products according to company procedures Read blueprints and specifications to ensure that products meet production standards Recommend necessary adjustments and changes to production processes Use instruments such as micrometer screw gauges, CMM and RAM optical to measure products Accept and reject finished products and discuss inspection results with the production team Perform inspections at random to assess product quality Qualifications: Preferred minimum 3 years aerospace manufacturing experience Knowledge of FAA regulatory requirements and processes Experience using handheld measuring and testing devices (e.g.; digital multimeter, caliper, micrometers, radius gages, etc.) Demonstrated ability to use computer programs such as Microsoft office products Must read, write and understand the English language Ability to read and comprehend technical manuals Experience working in a fast pace environment Previous experience using continuous improvement/lean tools such as; Six Sigma, 5-S, Lean Manufacturing, etc. to drive improvement A strong customer-oriented mindset with the ability to adapt and be flexible Ability to work with a team and independently Physical Requirements In this position you must be able to stand and occasionally sit Must be capable of regular, reliable and timely attendance Ability to lift up to 20 to 40 lbs. Excellent visual acuity Working Conditions Clean and climate-controlled facility Safe and casual work environment Non-union environment Education Requirements High School Diploma/GED McFarlane Aviation is an equal opportunity employer committed to fostering an inclusive, innovative environment with the best employees- so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds, and identities. Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the recruitment process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you.

McFarlane is a rapidly growing 50+ years old aviation firm that focuses on the design and manufacture of high-quality aircraft parts within the general aviation and commercial marketplace. We believe in providing better parts with superior “old-school” customer service. When you join the McFarlane team, you'll join a dedicated group of colleagues passionate about aviation, community, and the McFarlane way. Position Description: Quality Inspector How You Will Make an Impact: As a Quality Inspector, you will perform preliminary and in-process inspections of aircraft related components. To excel in this role, applicants should be able to show great attention to detail, possess strong organizational skills, and be able to demonstrate the ability to interpret approved data. When You Will Work: Monday through Friday, full-time position with flexible 1st shift hours. Operational Duties: Perform preliminary, in-process and final dimensions inspections Demonstrate the ability to interpret approved data sch as engineering drawings and specifications. Documenting inspection results by completing logs and reports Communicate with production, engineering and quality team Inspecting aircraft components to verify correct finish, configuration or other measurable or observable characteristics Performing and recording first article inspections in accordance with standards Establish quality standards for products according to company procedures Read blueprints and specifications to ensure that products meet production standards Recommend necessary adjustments and changes to production processes Use instruments such as micrometer screw gauges, CMM and RAM optical to measure products Accept and reject finished products and discuss inspection results with the production team Perform inspections at random to assess product quality Qualifications: Preferred minimum 3 years aerospace manufacturing experience Knowledge of FAA regulatory requirements and processes Experience using handheld measuring and testing devices (e.g.; digital multimeter, caliper, micrometers, radius gages, etc.) Demonstrated ability to use computer programs such as Microsoft office products Must read, write and understand the English language Ability to read and comprehend technical manuals Experience working in a fast pace environment Previous experience using continuous improvement/lean tools such as; Six Sigma, 5-S, Lean Manufacturing, etc. to drive improvement A strong customer-oriented mindset with the ability to adapt and be flexible Ability to work with a team and independently Physical Requirements In this position you must be able to stand and occasionally sit Must be capable of regular, reliable and timely attendance Ability to lift up to 20 to 40 lbs. Excellent visual acuity Working Conditions Clean and climate-controlled facility Safe and casual work environment Non-union environment Education Requirements High School Diploma/GED McFarlane Aviation is an equal opportunity employer committed to fostering an inclusive, innovative environment with the best employees- so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds, and identities. Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the recruitment process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you.

Job Title: Quality Control Technician Under the direction of the Quality Control Manager within the Operations department, the Quality Control Technician performs and documents quality control inspections of all types of precast concrete products. The inspection process includes evaluating pieces for dimensional accuracy, required tolerances, and aesthetic appearance, as well as interpreting piece tickets and production drawings. The technician is also responsible for daily shipping and receiving of finished products and raw materials. Responsibilities * Perform pre-pour inspection of all forms, reinforcement, steel, and inserts in a timely manner to maintain optimized workflow. * Maintain daily and project production records. * Check and verify all dimensions of cast-in embeds. * Complete daily Quality Control documentation. * Inspect all finished products and document any precast products requiring patching or rework. * Ensure all precast products are correctly marked. * Assist other Quality Control personnel in testing materials and finished products as required. * Maintain plant and yard safety in accordance with the Company Safety Manual under the direction of the Safety Coordinator. Skills & Qualifications * High School Diploma or GED. * 1 - 2+ years of experience in concrete. * Willingness to complete an ACI certification within the first 6 months of employment. * Attention to detail and accuracy in documentation. * High coordination and organization skills. * Proficiency in reading a tape measure. * Ability to lift up to 50lbs occasionally. * Ability to be on your feet all day. Work Environment The work environment involves a leading manufacturer of quality concrete products for various industries. The role requires working 50 hours a week, Monday through Friday, with occasional weekend work (not often). The position involves being on your feet all day and occasionally lifting up to 50lbs. Job Type & Location This is a Contract to Hire position based out of Kansas City, KS. Pay and Benefits The pay range for this position is $25.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kansas City,KS. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Code 14462 Permanent/Temporary? Permanent Apply Now Title: Quality Manager - Ballistics Salary: $ 121,000- $ 154,000 Schedule: 980 schedule Focus: The Quality Manager - Ballistics is responsible for leading the Ballistics Quality organization at the Lake City Army Ammunition Plant (LCAAP), ensuring that all products meet rigorous Department of Defense, regulatory, and Winchester quality standards. This position provides strategic leadership, technical direction, and operational oversight for quality assurance, quality control, ballistics, continuous improvement, and compliance functions in a high-volume, defense manufacturing environment. Quality Manager - Ballistics Essential Job Functions: * Supervise and provide direction to Quality Inspectors, Ballistic Technicians, and Ballistic supervisors, ensuring thorough inspection and testing of all ammunition products ran through the test facility. * Oversee the work of Quality Engineers to ensure compliance with quality standards and continuous improvement processes. * Manage operational challenges by analyzing data, recommending actions, and advancing lean manufacturing and cost-reduction initiatives. * Maintain an understanding of the Collective Bargaining Agreement and all administrative policies pertaining to wage employees, as well as salary employees. * Implement safety protocols to minimize risk associated with handling and testing explosives. Ensure Management of Change (MOC) Requirements are met. Quality Manager - Ballistics Minimum Requirements: * Bachelor's degree* in Engineering, Quality Management, or related technical field. * 7+ years of progressive experience in Quality within manufacturing, with at least 5 years in a leadership role. Defense or ammunition manufacturing experience strongly preferred. * Demonstrated expertise in ISO 9001, or higher-level quality management systems. * Strong knowledge of Army/DoD contracts, MIL-STDs, and defense industry compliance standards. * Black Belt or Master Black Belt certification in Lean Six Sigma preferred. * Exceptional leadership, communication, and stakeholder management skills. Location-Specific Requirements: * Ability to obtain and maintain U.S. Government security clearance if required. * Must possess a valid US driver's license. * This position requires successful vetting as an Employee Possessor in accordance with U.S. Department of Justice and the Bureau of Alcohol, Tobacco, Firearms and Explosives. * This position requires access to ITAR controlled technical data, and as such, employment will be contingent upon the candidate's ability to access ITAR controlled technical data pursuant to an export license approved by the Directorate of Defense Trade Controls, if required. * This position requires successful vetting for unescorted access in accordance with U.S. Army and Department of Defense access policies. The US Government does not allow non-US citizens on-site at the Lake City Army Ammunition Plant. Therefore, to be considered in the hiring process, the candidate must be a US citizen. Strong Careers Grow Here Olin fosters a diverse and inclusive workplace, where you are encouraged to join or lead our Olin People Networks. These voluntary groups connect employees across sites, divisions and functions to strengthen connections, belonging, and community involvement. Rooted in our corporate values, Olin continues to be the global leader in both ammunition and chemical manufacturing. We invest, recognize, and reward the talents and contributions of our employees, empowering over 8,000 global individuals to make an impact both at work and in surrounding communities. View a snapshot of our comprehensive benefits package. Olin does not provide any form of sponsorship. We will only employ those who are legally authorized to work in the United States. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J or TN or who need sponsorship now or in the future, are not eligible for hire. * Degree must be from a school that is accredited by an accrediting agency recognized by the Secretary of Education of the U.S. Department of Education or equivalent program from an international university. Olin is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. #Winchester Back Share * * * * * Apply Now

Responsibilities: Review and evaluate Quality Documents, ensuring that all documents are applicable to current standards & procedures and properly represent current manufacturing processes and procedures. Ensure procedures are being followed for the following processes: Creation of Manufacturing Inspection Reports (MIR) for all parts and assemblies. First Article Inspections (FAI) In Process Inspections Internal, Customer, Supplier and other third-party audits Final Inspection Reports Inspection and receipt of all incoming parts and material (raw material, hardware, supplies, and parts returning from outside processing). Review and approval of vendor certifications and inspection processes. Generate and complete “Corrective Action Reports” (CAR) in a timely manner; also ensure that the corrective actions are incorporated back into the Manufacturing Process Plans (MPP) and Manufacturing Inspection Reports (MIR) Lead quality initiatives including any actions or audits required. Establish inspection training programs and growth opportunities that appropriately reach each person within quality. The goal is to improve skill sets and the ability to be cross-functional within the quality assurance organization. Take the lead in understanding “form, fit, and function” of products and parts that we manufacture and assemble. Identify ‘grey area” questions and work with all departments, customers, and sister companies to identify solutions and outcomes that are satisfactory to all parties. Follow up on corrective actions with verification and validation. Resolve quality and process issues. Enhance and improve methods for inspection, testing, sampling, and training. Assist in other areas or perform other duties as required by business demands. Maintains safe and clean work environment; maintaining compliance with established policies and procedures Perform other duties as assigned by supervision.

Job DescriptionSalary: DOE Splintek is a Lenexa based, made in the USA manufacturing company in the business of providing high-quality healthcare products to Retailers, Professionals and direct to consumers since 1996. Innovation, team-based, high energy, casual business environment. Splinteks mission is to enhance the quality of life globally by innovating healthcare products for better sleep, more comfort, and overall health. Please visit our website at ****************** Splintek offers Competitive Wages and Benefits, including: Medical Insurance Dental Insurance Vision Insurance 401(k) Match Paid Time Off Paid Holidays Casual Dress/ Atmosphere New Facility Workout Room on Site This position is full time on-site, we are not offering hybrid, remote, or flex schedules at this time. PRIMARY OBJECTIVE OF POSITION Perform standardized qualitative and quantitative tests to determine the physical or chemical properties of various materials to ensure compliance with company and government standards, assure regulatory compliance, and research and development of new products. DUTIES AND RESPONSIBILITIES / ESSENTIAL FUNCTIONS Supervise and review analytical work, research projects, and production formulations and products Contribute to the development and successful launch of our new products Adhere to all GMP/GLP requirements Creatively devise test methods for new product evaluation Maintain stability programs to optimize product formulas and specialized packaging configurations Coordinate and review out-sourced testing with research organizations Maintain calibration program for lab instruments and production scales Ensure company compliance with EPA, FDA, and OSHA regulations Perform Quality Control testing on raw materials, intermediate, and finished products using established analytical procedures Recommend changes or adjustments to operations for the purpose of improving or correcting product blends Properly document results and assist in the development and improvement of laboratory SOPs and the maintenance of the quality assurance system Update and maintain all laboratory databases with new results for record keeping and report generation Make safety a priority consideration with all actions taken and ensure that safe work practices are followed and adhered to Injection molding processing, training, and support QUALIFICATIONS EDUCATION REQUIRED: Bachelors degree in Chemistry, Polymer Chemistry, or related field EXPERIENCE AND SKILL REQUIRED: 3 years of laboratory and quality assurance experience Familiarity with ASTM and ISO test methods Good working knowledge of analytical chemistry Excellent oral and written communication skills Proficient in spoken and written English Microsoft Office? PREFERRED: Familiar with injection molding processing, thermoplastic polymers, and polymer chemistry Familiarity with thermoplastic molding and part production Familiarity with ICH guidelines and cGMP and GLP regulations Familiarity with FDA regulations for medical devices. Instrumental analysis, including GC and GC-MS (HS-GC-MS preferred), DSC, FTIR, optical profilometry and optical microscopy WORK ENVIRONMENT AND PHYSICAL DEMANDS Vision: Use vision to read, write, type, operate office, electronic, and manufacturing equipment, and make fine adjustments. Speaking/Hearing: Give and receive information through speaking and hearing. Motor Coordination: Requires hands to operate equipment. Lift/Carry: Regularly lift, push, and move up to 50lbs. Environment: Office and warehouse environments may be dust, contain sharp edges, include areas that are not well lit, the floor may be uneven or cracked, and the facility may be subject to variations in temperature. Search Firm Representatives Please read carefully Splintek does not accept assistance from search firms. Please, no phone calls or e-mails. All resumes sent by search firms to any employee at Splintek via e-mail, internet or in any form and/or method without valid written search agreement in place for this position will be deemed the sole property of Splintek. No fee will be paid in the event the candidate is hired by Splintek as a result of the referral or any other means. Thank you for your cooperation.

COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to engineering and manufacturing electronic solutions enabling a safer, healthier and more sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fueled by performance and expertise, leading the charge in innovation, efficiency and delivering world-class customer service. Be part of the journey. Role Overview and Responsibilities This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., "Green Card Holder"), Political Asylee, or Refugee. Introduction The Quality Technician plays a critical role in maintaining site-wide quality control by managing all non-conforming material, coordinating third-party source inspections, and performing timely inspections on returned goods. This position ensures proper containment and documentation of quality issues, prepares and supports materials for external inspections, and provides quick assessments of returned items to facilitate accurate and timely customer responses. The technician partners closely with Quality, Operations, and Supply Chain to resolve issues, maintain accurate quality records, and uphold all procedural and regulatory requirements. Key Responsibilities Manage and process all non-conforming material, including identification, segregation, documentation, and disposition. Coordinate and facilitate third-party source inspections, ensuring required materials, documentation, and quality records are prepared and available. Perform timely inspections on returned goods (RMA), including visual, mechanical, or dimensional checks to support quick evaluation and customer response. Maintain accurate records for NCRs, source inspections, RMAs, and other quality-related data in accordance with internal procedures. Support material flow by resolving quality holds quickly and escalating issues when needed to prevent delays or quality escapes. Collaborate with Quality Engineers, Operations, and Supply Chain to investigate issues, verify corrective actions, and support continuous improvement activities. Follow established quality procedures, work instructions, and regulatory/ITAR requirements to ensure compliance and audit readiness. Other duties, as assigned or required. Qualifications, Skills and Attributes Core Requirements Exceptional attention to detail with strong observational and analytical skills to identify quality issues accurately and consistently. Proficiency with inspection tools and equipment, including calipers, micrometers, gauges, and other precision measurement instruments. Working knowledge of quality systems and methodologies, such as AS9100, ISO standards, Lean Manufacturing, and root-cause analysis tools. Ability to read and interpret engineering drawings, blueprints, specifications, and technical documentation with a high level of accuracy. Strong communication and interpersonal skills, with the ability to collaborate effectively across Quality, Operations, Engineering, and Supply Chain. Advanced computer proficiency, including Microsoft Office Suite, quality management software (QMS), and data analysis tools within a manufacturing or regulated environment. Ability to perform the essential functions of the job with or without reasonable accommodation, in accordance with ADA requirements. Desireable Skills and Experience High school diploma or equivalent required; additional technical, vocational, or trade school training in quality control, manufacturing, engineering, or a related field strongly preferred. Five or more years of experience in quality inspection, manufacturing, electronics, or a regulated production environment; experience working within AS9100 or aerospace/defense quality systems is highly advantageous. Demonstrated ability to accurately use and read precision measurement tools, including but not limited to calipers, micrometers, feeler gauges, height gauges, and X-ray or other non-destructive inspection equipment. Strong understanding of inspection techniques, non-conformance handling, and documentation requirements in a high-mix, high-reliability manufacturing environment. Competence in interpreting engineering drawings, specifications, and technical data, including GD&T, preferred. Proficiency in computer-based quality systems, including QMS platforms, ERP systems, and Microsoft Office Suite. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., "Green Card Holder"), Political Asylee, or Refugee. TT Electronics does not accept any unsolicited resumes from third parties. Any resumes submitted by a third party for this or any other position will not be subject to any recruitment fees if hired. Solving Technology Challenges for a Sustainable World We want the very best people in our TT family across the globe - so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds and identities. We are committed to equality of opportunity for all and you can rest assured that TT Electronics takes positive steps to ensure we are an inclusive business, that will welcome and support you, from your initial application to wherever your career takes you! Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you. #WeAreTT #BeMeAtTT

Job Title: Quality Control Technician Under the direction of the Quality Control Manager within the Operations department, the Quality Control Technician performs and documents quality control inspections of all types of precast concrete products. The inspection process includes evaluating pieces for dimensional accuracy, required tolerances, and aesthetic appearance, as well as interpreting piece tickets and production drawings. The technician is also responsible for daily shipping and receiving of finished products and raw materials. Responsibilities * Perform pre-pour inspection of all forms, reinforcement, steel, and inserts in a timely manner to maintain optimized workflow. * Maintain daily and project production records. * Check and verify all dimensions of cast-in embeds. * Complete daily Quality Control documentation. * Inspect all finished products and document any precast products requiring patching or rework. * Ensure all precast products are correctly marked. * Assist other Quality Control personnel in testing materials and finished products as required. * Maintain plant and yard safety in accordance with the Company Safety Manual under the direction of the Safety Coordinator. Skills & Qualifications * High School Diploma or GED. * 1 - 2+ years of experience in concrete. * Willingness to complete an ACI certification within the first 6 months of employment. * Attention to detail and accuracy in documentation. * High coordination and organization skills. * Proficiency in reading a tape measure. * Ability to lift up to 50lbs occasionally. * Ability to be on your feet all day. Work Environment The work environment involves a leading manufacturer of quality concrete products for various industries. The role requires working 50 hours a week, Monday through Friday, with occasional weekend work (not often). The position involves being on your feet all day and occasionally lifting up to 50lbs. Job Type & Location This is a Contract to Hire position based out of Kansas City, KS. Pay and Benefits The pay range for this position is $25.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kansas City,KS. Application Deadline This position is anticipated to close on Jan 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job DescriptionDescription: Splintek is a Lenexa based, made in the USA manufacturing company in the business of providing high-quality healthcare products to Retailers, Professionals and direct to consumers since 1996. Innovation, team-based, high energy, casual business environment. Splintek's mission is to enhance the quality of life globally by innovating healthcare products for better sleep, more comfort, and overall health. Please visit our website at ****************** PRIMARY OBJECTIVE OF POSITION Perform standardized qualitative and quantitative tests to determine the physical or chemical properties of various materials to ensure compliance with company and government standards, assure regulatory compliance, and research and development of new products. DUTIES AND RESPONSIBILITIES / ESSENTIAL FUNCTIONS Supervise and review analytical work, research projects, and production formulations and products Contribute to the development and successful launch of our new products Adhere to all GMP/GLP requirements Creatively devise test methods for new product evaluation Maintain stability programs to optimize product formulas and specialized packaging configurations Coordinate and review out-sourced testing with research organizations Maintain calibration program for lab instruments and production scales Ensure company compliance with EPA, FDA, and OSHA regulations Perform Quality Control testing on raw materials, intermediate, and finished products using established analytical procedures Recommend changes or adjustments to operations for the purpose of improving or correcting product blends Properly document results and assist in the development and improvement of laboratory SOPs and the maintenance of the quality assurance system Update and maintain all laboratory databases with new results for record keeping and report generation Make safety a priority consideration with all actions taken and ensure that safe work practices are followed and adhered to Injection molding processing, training, and support Requirements: EDUCATION REQUIRED: Bachelor's degree in Chemistry, Polymer Chemistry, or related field EXPERIENCE AND SKILL REQUIRED: 3 years of laboratory and quality assurance experience Familiarity with ASTM and ISO test methods Good working knowledge of analytical chemistry Excellent oral and written communication skills Proficient in spoken and written English Microsoft Office? PREFERRED: Familiar with injection molding processing, thermoplastic polymers, and polymer chemistry Familiarity with thermoplastic molding and part production Familiarity with ICH guidelines and cGMP and GLP regulations Familiarity with FDA regulations for medical devices. Instrumental analysis, including GC and GC-MS (HS-GC-MS preferred), DSC, FTIR, optical profilometry and optical microscopy **We are NOT interested in working with recruiters or employment agencies at this time. Please do not email about potential candidates. WORK ENVIRONMENT AND PHYSICAL DEMANDS Vision: Use vision to read, write, type, operate office, electronic, and manufacturing equipment, and make fine adjustments. Speaking/Hearing: Give and receive information through speaking and hearing. Motor Coordination: Requires hands to operate equipment. Lift/Carry: Regularly lift, push, and move up to 50lbs. Environment: Office and warehouse environments may be dust, contain sharp edges, include areas that are not well lit, the floor may be uneven or cracked, and the facility may be subject to variations in temperature.

COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to engineering and manufacturing electronic solutions enabling a safer, healthier and more sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fueled by performance and expertise, leading the charge in innovation, efficiency and delivering world-class customer service. Be part of the journey. Role Overview and Responsibilities This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., "Green Card Holder"), Political Asylee, or Refugee. Introduction The Quality Technician plays a critical role in maintaining site-wide quality control by managing all non-conforming material, coordinating third-party source inspections, and performing timely inspections on returned goods. This position ensures proper containment and documentation of quality issues, prepares and supports materials for external inspections, and provides quick assessments of returned items to facilitate accurate and timely customer responses. The technician partners closely with Quality, Operations, and Supply Chain to resolve issues, maintain accurate quality records, and uphold all procedural and regulatory requirements. Key Responsibilities * Manage and process all non-conforming material, including identification, segregation, documentation, and disposition. * Coordinate and facilitate third-party source inspections, ensuring required materials, documentation, and quality records are prepared and available. * Perform timely inspections on returned goods (RMA), including visual, mechanical, or dimensional checks to support quick evaluation and customer response. * Maintain accurate records for NCRs, source inspections, RMAs, and other quality-related data in accordance with internal procedures. * Support material flow by resolving quality holds quickly and escalating issues when needed to prevent delays or quality escapes. * Collaborate with Quality Engineers, Operations, and Supply Chain to investigate issues, verify corrective actions, and support continuous improvement activities. * Follow established quality procedures, work instructions, and regulatory/ITAR requirements to ensure compliance and audit readiness. * Other duties, as assigned or required. Qualifications, Skills and Attributes Core Requirements * Exceptional attention to detail with strong observational and analytical skills to identify quality issues accurately and consistently. * Proficiency with inspection tools and equipment, including calipers, micrometers, gauges, and other precision measurement instruments. * Working knowledge of quality systems and methodologies, such as AS9100, ISO standards, Lean Manufacturing, and root-cause analysis tools. * Ability to read and interpret engineering drawings, blueprints, specifications, and technical documentation with a high level of accuracy. * Strong communication and interpersonal skills, with the ability to collaborate effectively across Quality, Operations, Engineering, and Supply Chain. * Advanced computer proficiency, including Microsoft Office Suite, quality management software (QMS), and data analysis tools within a manufacturing or regulated environment. * Ability to perform the essential functions of the job with or without reasonable accommodation, in accordance with ADA requirements. Desireable Skills and Experience * High school diploma or equivalent required; additional technical, vocational, or trade school training in quality control, manufacturing, engineering, or a related field strongly preferred. * Five or more years of experience in quality inspection, manufacturing, electronics, or a regulated production environment; experience working within AS9100 or aerospace/defense quality systems is highly advantageous. * Demonstrated ability to accurately use and read precision measurement tools, including but not limited to calipers, micrometers, feeler gauges, height gauges, and X-ray or other non-destructive inspection equipment. * Strong understanding of inspection techniques, non-conformance handling, and documentation requirements in a high-mix, high-reliability manufacturing environment. * Competence in interpreting engineering drawings, specifications, and technical data, including GD&T, preferred. * Proficiency in computer-based quality systems, including QMS platforms, ERP systems, and Microsoft Office Suite. * This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., "Green Card Holder"), Political Asylee, or Refugee. TT Electronics does not accept any unsolicited resumes from third parties. Any resumes submitted by a third party for this or any other position will not be subject to any recruitment fees if hired. Solving Technology Challenges for a Sustainable World We want the very best people in our TT family across the globe - so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds and identities. We are committed to equality of opportunity for all and you can rest assured that TT Electronics takes positive steps to ensure we are an inclusive business, that will welcome and support you, from your initial application to wherever your career takes you! Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you. #WeAreTT #BeMeAtTT

Job Title: Quality Control Technician Under the direction of the Quality Control Manager within the Operations department, the Quality Control Technician performs and documents quality control inspections of all types of precast concrete products. The inspection process includes evaluating pieces for dimensional accuracy, required tolerances, and aesthetic appearance, as well as interpreting piece tickets and production drawings. The technician is also responsible for daily shipping and receiving of finished products and raw materials. Responsibilities + Perform pre-pour inspection of all forms, reinforcement, steel, and inserts in a timely manner to maintain optimized workflow. + Maintain daily and project production records. + Check and verify all dimensions of cast-in embeds. + Complete daily Quality Control documentation. + Inspect all finished products and document any precast products requiring patching or rework. + Ensure all precast products are correctly marked. + Assist other Quality Control personnel in testing materials and finished products as required. + Maintain plant and yard safety in accordance with the Company Safety Manual under the direction of the Safety Coordinator. Skills & Qualifications + High School Diploma or GED. + 1 - 2+ years of experience in concrete. + Willingness to complete an ACI certification within the first 6 months of employment. + Attention to detail and accuracy in documentation. + High coordination and organization skills. + Proficiency in reading a tape measure. + Ability to lift up to 50lbs occasionally. + Ability to be on your feet all day. Work Environment The work environment involves a leading manufacturer of quality concrete products for various industries. The role requires working 50 hours a week, Monday through Friday, with occasional weekend work (not often). The position involves being on your feet all day and occasionally lifting up to 50lbs. Job Type & Location This is a Contract to Hire position based out of Kansas City, KS. Pay and Benefits The pay range for this position is $25.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kansas City,KS. Application Deadline This position is anticipated to close on Jan 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job Code 14381 Permanent/Temporary? Permanent Apply Now Title: Process Engineer Salary: $ 101,300 - $ 152,600 Schedule: 980 schedule Focus: We are seeking a skilled Process Engineer to join our dynamic team. The successful candidate will be responsible for developing and optimizing manufacturing processes to improve efficiency, quality, and safety. The role requires a hands-on approach to problem-solving and a keen eye for detail. Process Engineer Essential Job Functions: * Design and develop new manufacturing processes and improve existing ones to enhance productivity and efficiency. * Collect and analyze data to identify areas for improvement and implement solutions. * Ensure that all processes comply with quality standards and regulations. * Work closely with cross-functional teams, including production, quality control, and maintenance, to achieve common goals. * Identify opportunities for cost savings and implement cost-effective solutions. Process Engineer Minimum Requirements: * Bachelor's degree* in Mechanical, Chemical, Aerospace, Mechanical, or Electrical Engineering. * Minimum 3 years of experience required * Basic mechanical/machinery knowledge. * Ability to work with minimal supervision, manage own time effectively, and maintain control over all current projects/responsibilities. * Demonstrated ability to set priorities, manage high-volume workload, and willingness to be collaborative and support team efforts. * Excellent interpersonal and communication (verbal and written) skills. * Must possess a valid US driver's license. * Some travel may be required: less than 5%. Location-Specific Requirements: * This position requires successful vetting as an Employee Possessor in accordance with U.S. Department of Justice and the Bureau of Alcohol, Tobacco, Firearms and Explosives. * This position requires access to ITAR controlled technical data, and as such, employment will be contingent upon the candidate's ability to access ITAR controlled technical data pursuant to an export license approved by the Directorate of Defense Trade Controls, if required. * This position requires successful vetting for unescorted access in accordance with U.S. Army and Department of Defense access policies. The US Government does not allow non-US citizens on-site at the Lake City Army Ammunition Plant. Therefore, to be considered in the hiring process, the candidate must be a US citizen. Strong Careers Grow Here Olin fosters a diverse and inclusive workplace, where you are encouraged to join or lead our Olin People Networks. These voluntary groups connect employees across sites, divisions and functions to strengthen connections, belonging, and community involvement. Rooted in our corporate values, Olin continues to be the global leader in both ammunition and chemical manufacturing. We invest, recognize, and reward the talents and contributions of our employees, empowering over 8,000 global individuals to make an impact both at work and in surrounding communities. * Degree must be from a school that is accredited by an accrediting agency recognized by the Secretary of Education of the U.S. Department of Education or equivalent program from an international university. Olin does not provide any form of sponsorship to applicants not authorized to work in the US. Olin is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. #Winchester Back Share * * * * * Apply Now