Quality engineer jobs in San Bernardino, CA - 646 jobs

Quality Engineer supports all aspects of the Quality Management System, Product Realization and Manufacturing Process Controls. Working with cross functional partners, defines and generates quality control plans, production process controls and procedures. Leads and supports validations including statistical analysis. Engages with customers to address quality issues and define acceptance criteria/attributes. Essential Job Functions and Responsibilities: Support the development and manufacturing of medical devices in conformance with applicable ISO 13485 requirements. Responsible for quality planning of all new development programs and design transfers to production. Ensure policies and procedures comply with regulations and external standards, including software regulations, risk management, and change control. Interact and form constructive working relationships with all levels of leadership within Quality, Procurement, Marketing, Engineering, and Operations. Collaborate with Program Managers, Process Engineers, and/or Validation Engineers to execute process and equipment qualifications. Problem Resolution: identification, data collection and trend analysis, reporting, and initiation of corrective and/or preventive action as well as reporting out of Key Metrics. Identify opportunities and implement solutions to drive continuous improvement in performance metrics. Investigate customer complaints, corrective actions and trending to drive improvements. * Plan and perform regular audits of quality system and drive system improvements through the Internal Audit and Quality Event Management (CAPA, NCR, Complaint etc.) Monitoring and improvement of SPC systems, sampling plans and statistical methods. * Back-up and or perform to Head of Site Quality/Supervisor Representative, as assigned. Plan, prepare, and execute Internal Audits, as assigned. Participate in Material Review Board and/or Change Control Board as QA representative. Utilize tools, gauges and other inspection equipment to obtain product specification data * Expert in utilizing hand measurement tools (Caliper, Micrometer, Ruler, Gage Blocks, height gage, etc.). High Proficiency with PCDMIS inspection software utilizing CMM's: Brown, Sharpe, Hexagon, Smart scope. Expert with utilizing ANSI Sampling Plans, IQMS, Minitab, Excel and Microsoft Word High Proficiency in material analysis (i.e. FTIR, Melt Flow Testing, etc.) Ability to read and decipher blueprints * Proficient in metrology and calibration. Working knowledge of statistical methods for manufacturing. Proficient in Geometric Dimensioning and Tolerancing (ANSI Y-14.5) Requirements: Minimum Education: five (5) years' experience in a similar field. Working knowledge in problem solving methodologies. Excellent oral and written communication skills. Minimum Experience: At least two (2) year experience in a supervision and/or management role. Demonstrated experience to lead teams and projects. Good organizational skills. Previous experience in plastic injection molding related environment. Demonstrated experience to lead teams and projects. Good organizational skills. Previous experience in plastic injection molding related environment. Working in a medical device or other FDA regulated industry. Comprehensive understanding of ISO 9001, ISO 13485, JPAL MHLW Ordinance 169, and/or FDA QSR regulatory requirements. Computer literate with working knowledge of MS Word, Excel, and Access. Desired candidate will have prior work history in MSA, SPC, Mini-tab, Infinity, sterilization, & clean room environment. *Knowledge, Skills, and Abilities A working knowledge of FDA cGMP, ISO13485 requirements A working knowledge of medical device manufacturing quality systems. Working knowledge of Statistical Methods used in manufacturing. * PC-DMIS knowledge a plus. Education and/or Experience: 3-7 Years in Quality Engineering in manufacturing and/or quality assurance. Training in applicable ISO 9001, ISO 13485. Experience using Minitab. Proficient in metrology and calibration standards. Proficient in Quality Audit concepts. FDA quality standards experience a plus. Certifications such as ASQ CQE, CQA, CQM Warehouse areas (limited) Will be required to perform other duties as requested, directed or assigned.

Join Yorke Engineering, LLC, an Environmental Consulting leader in California that implements Environmental Engineering and Compliance solutions for our clients throughout California. Our mission is to solve environmental compliance problems for industrial and governmental/infrastructure facilities. We are a growing and dynamic organization of highly respected professionals. Yorke Engineering, LLC has assisted over 1,900 client organizations with their Air Quality and Environmental Compliance, Engineering, and Permitting needs. Our philosophy is to efficiently help government and industrial customers with the complex array of environmental laws and regulations. From simple permits to complex agency negotiations, from small companies to the largest of California's organizations, Yorke successfully solves our clients' Air Quality and Environmental challenges. Our team has over 1,000 years of combined environmental experience and consists of engineers and scientists that specialize in Air Quality, Waste, Water, CEQA, Safety, and Industrial Hygiene. We are looking for a sharp Air Quality Engineer / Scientist (Environmental Permitting and Compliance Specialist) to join our team in any of our Southern CA offices (Diamond Bar, Long Beach, Los Angeles, San Juan Capistrano, San Diego, Ventura, or Riverside) during our normal business hours. We offer competitive salaries, a full benefits package including Paid Time Off, Holidays, Full Medical/Dental/Vision, along with a 401k program with a generous company match. Position Summary: The Air Quality Engineer / Scientist (Environmental Permitting and Compliance Specialist) performs professional engineering work, executing the compliance and permitting functions in relation to Air Quality Regulations and Compliance. This candidate will be reviewing processes and equipment, analyzing permit-related technical and regulatory issues, and communicating those analyses within Yorke, the client organization, with government agencies and with the public at large. The work is challenging, broad in scope, and variable from project to project. The position involves effective communication, decision-making, and time management. The candidate performs other duties as required or assigned. The candidate qualifications we are seeking include: 5-15 years of work experience in the Air Quality and/or Environmental industry in an engineering role (preferably in a consulting environment); Experience as an active team member in the environmental services industry as a consultant focusing on: Process and equipment review; Air quality permitting under SCAQMD, and other Air Districts, including Title V permitting; RECLAIM implementation and reporting; Annual Emissions Reporting; Air Dispersion Modeling; Air Quality Assessments including Data Analysis and Emission Inventories; General Air Quality Compliance for facilities in CA, including problem solving. Ability to be an active team member on project teams towards project completion within project scope, budget and schedule and ensure quality work product and deliverables; Ability to work with clients, staff, and regulators through effective communication and expertise by fostering a collaborative environment without losing focus of quality; Proven track record or desire to engage in successful regulatory work in dealing with the SCAQMD, EPA, CARB and/or other similar regulatory agencies; Experience or desire to work on-site at client facilities; Prepare reports and submissions in timely manner; Experience with handling highly technical data and technical data interpretation; Highly motivated to continue working in Air Quality environmental field and expand their knowledge and experience; CA Regulatory/Compliance experience is required. Job Requirements: B.S or M.S. degree in Chemical Engineering, Environmental Engineering, or Mechanical Engineering, or other relevant technical degrees from an accredited college (minimum GPA of 3.0); Ability to work collaboratively in a team fashion, handle several projects at once, prioritize work, and work efficiently; Desire to learn or developing technical expertise in environmental rules and regulations; Excellent oral and written communications skills; Experience in conflict resolution and crisis management; Track record of successful analysis, interpretation, and application of rules and regulations towards practical solutions; Ability to think critically and develop solutions; Software Knowledge: Strong Microsoft Excel, Word, Outlook, and Powerpoint skills (required); Microsoft 365 Applications, including Sharepoint (a plus) EIT, CPP or P.E. (a plus).

Our client, a private label manufacturer in the CPG foods space, is seeking a Packaging Engineer to join their growing team. This role will involve leading packaging design and development, supporting sourcing and procurement efforts, and managing packaging testing protocols. Term: Full Time/Permanent Location: City of Industry (onsite) Compensation: $90k - $120k/year Desired Qualifications: 3+ years of experience in a packaging engineering-focused role Experience designing flexible and rigid packaging elements Experience with testing protocols (ISTA, ASTM, similar) Experience in the food/beverage industry is a big plus Degree in Packaging Engineering, or similar

The City of Corona is seeking a detail-driven and solutions-oriented Plan Check Engineer to play a vital role in shaping safe, sustainable, and thriving spaces for generations to come. In this dynamic role, you'll be at the forefront of community development-reviewing complex architectural and structural plans, interpreting building codes, and collaborating with top-tier professionals to ensure every project is up to standard. Knowledge Theories and principles of structural design, engineering mathematics and soils engineering. Approved building construction methods, materials and proper inspection methods related to residential, commercial and industrial developments. Federal, state and municipal codes and regulations governing housing and building construction, rehabilitation, alteration, use and occupancy, including the Model or California Building, Plumbing, Mechanical, Energy, Fire and Electrical Codes. Appropriate safety and fire prevention construction and building methods. Education and Experience: Education: Graduation from a four-year college or university with major course work in architecture or civil, structural, or architectural engineering. Experience: Three (3) years of increasingly responsible professional plan checking experience; or an equivalent combination of training and experience. Special Requirements A valid Class C California driver's license and the ability to maintain insurability under the City's Vehicle Insurance Policy. Registration as a Professional Engineer with the State of California Department of Consumer Affairs - Board for Professional Engineers, Land Surveyors, and Geologists. Certification as a Building Plans Examiner by ICC is required, or ability to obtain within one year of employment date. Skills & Abilities Plan, organize, perform detailed analysis and examination of building and construction designs, specifications and plans. Apply engineering and architectural principles and techniques to solve complex residential, commercial and industrial construction problems and objectives. Analyze structural integrity and load factors using engineering design mechanics. Analyze and evaluate complex building plans, data and reports to determine whether compliance has been achieved. Prepares correspondence to architects, engineers and contractors relating to the correction of plans and engineering detail; initiates notifications of code violations. Advises Building Inspectors on structural and other building-related problems arising in the field during construction. Prepares and conducts training programs for plan check, inspection, and counter personnel. Licenses and Certifications: A valid Class C California driver's license and the ability to maintain insurability under the City's Vehicle Insurance Policy. Registration as a Professional Engineer with the State of California Department of Consumer Affairs - Board for Professional Engineers, Land Surveyors, and Geologists with a status of good standing and not suspended or revoked. Certification as a Building Plans Examiner by ICC is required, or ability to obtain within one year of employment date. Application Process Applications will be accepted on a continuous basis until a sufficient number of qualified applications have been received. The deadline for first review of applications is Tuesday, August 19, 2025. The selection process will consist of a review and evaluation of all applicants' qualifications. Those applicants deemed to possess the most desirable qualifications will be invited to participate in a possible virtual HireVue and oral interview. The top scoring candidates from the oral interview will be placed on an eligibility list from which the department may hire. The eligibility list established from this recruitment may also be used to fill the current and/or additional vacancies throughout the City. COMMUNITY A City whose heritage spans more than 125 years, the City of Corona, located in Riverside County, California, encompasses approximately 40 square miles and has a vibrant, culturally diverse population of approximately 170,000 residents. Residents of Corona enjoy a variety of cultural, recreational, and educational opportunities that provide a first-rate quality of life for its residents and visitors. Within an hour's travel time, outdoor enthusiasts can enjoy winter activities such as snowboarding and skiing and summer activities including surfing, boating, or simply relaxing on world class beaches. Corona's economy is strong and getting stronger; more than 84,000 people work here. Our retail, commercial, and housing areas are expanding, and office development continues to be strong. THE ORGANIZATION The City of Corona is a General Law city operating under a Council-Manager form of government. Policy making and legislative authority is vested in the City Council, consisting of a Mayor and four Council Members. Members of the City Council are elected by District to a four-year term. The Mayor is selected by the Council and serves as the presiding officer for one year. The City is organized into the following departments/organizational units: Community Services, City Manager's Office, Economic Development, Finance, Fire, Human Resources, Information Technology, Legal and Risk Management, Police, Planning & Development, Public Works, and Utilities. Oversight of these departments is divided between the City Manager and an Assistant City Manager. The City's total operating budget for Fiscal Year 2026 is $422.7 million with a General Fund operating budget of $231.3 million. Corona enjoys a workforce of 935 dedicated employees who provide high-quality services to its residents and visitors each day. ESSENTIAL DUTIES AND RESPONSIBILITIES To view the essential duties and responsibilities, click here. QUALIFICATIONS GUIDELINES To view the qualifications guidelines, click here. PHYSICAL/MENTAL DEMANDS AND WORK ENVIRONMENT To view the physical/mental demands and work environment, click here.

Job Title: Manufacturing Test Engineer (Electrical) Engagement Type: 1-Year Contract (with possible extension) Pay Rate: $26-$32.00/hour Schedule: Monday-Friday | 100% Onsite | 6:00 AM-2:00 PM (PST) Position Overview We are seeking a Test Equipment Technician to support manufacturing and test engineering operations at our Costa Mesa facility. This is an immediate need role focused on the maintenance, troubleshooting, and repair of test fixtures and equipment in accordance with Schneider Electric test engineering and quality standards. The ideal candidate will have a strong electrical engineering background, hands-on test experience, and exposure to high-voltage systems. Key Responsibilities Perform detailed maintenance, troubleshooting, and repair of test fixtures and test equipment Ensure all test equipment is properly maintained, calibrated, and operational Collaborate closely with Test Engineers to diagnose issues and resolve equipment failures Execute preventive and corrective maintenance tasks to maximize equipment availability, efficiency, and effectiveness Support workflow scheduling and complete required administrative documentation Ensure assigned tasks are completed accurately and within established timelines Adhere to all quality, safety, and engineering procedures Perform other related duties as assigned Required Qualifications Associate degree (AA/AS) in Electrical Engineering or Electrical Technology and 4+ years of related experience OR Certificate from a recognized technical trade school (or advanced military technical training) plus 4+ years of related experience OR High School Diploma or GED (required) with equivalent hands-on technical experience Strong hands-on experience with test equipment and electrical systems Ability to use electronic test and measurement equipment, including DVMs and oscilloscopes, and accurately interpret results Proficiency with basic hand tools and soldering techniques Strong written and verbal communication skills in English Basic computer proficiency, including Microsoft Word and Excel Good color vision for identifying color-coded wiring and cabling Preferred Qualifications Experience working with high-voltage systems (up to 480V) Manufacturing or test environment experience Electrical Engineering (EE) background Top Skills Test Equipment Maintenance & Troubleshooting Electrical Engineering Fundamentals High-Voltage Testing (480V preferred) Test Fixtures & Manufacturing Test Systems

Job Description Responsible for establishing and continuing eective quality improvement eorts to achieve organizational performance goals and national top decile performance in clinical excellence. Quality improvements may be small or large scale and are in alignment with s strategic goals for example, addressing 30-day readmissions and mortality reduction. The Quality Improvement Manager may apply Lean, Six Sigma, and other quality improvement methodologies to deliver results. Job Responsibilities: Coaches and trains teams in the utilization of improvement tools and implementation of improvements. Manages plans and develops guidelines, process measures, targets, and standards for monitoring and measuring results to deliver on goals. Interacts daily with leaders, to identify, dene, and manage opportunities to improve quality while helping create a strategic approach to produce and establish extraordinary improvement. The Program Manager Quality Improvement collaborates to lead and organize eorts for continuous clinical improvement. Skills: Required Skills & Experience: Advanced training or experience in performing statistical, financial and strategic analysis Five years experience in performance/process improvement projects including but not limited to Lean, Six Sigma methodologies Demonstrated performance improvement and process improvement skills and knowledge of methodologies such as Lean, Six Sigma, DMAIC, and PDCA Highly proficient in Microsoft Project and the Microsoft Office Suite (Word, Excel, PowerPoint, Visio) Comprehensive digital marketing skills Preferred Skills & Experience: Experience managing healthcare-related projects and familiarity with healthcare provider industry Seven years experience in performance/process improvement projects preferred. Education: Required Education: Bachelors degree in Industrial Engineering, Business/Healthcare Administration, Life Sciences or equivalent Medical Foundation, Physician Practice or Health Plan related experience Preferred Education: Masters degree in Industrial Engineering, Business/Healthcare Administration, or Public Health Consulting experience OR Masters degree in Healthcare Administration or Public Health. This is the pay range that RightSourcing (a part of Magnit) reasonably expects to pay someone for this position, however, as a supplier your expected pay range may vary and/or include certain benefits like: Stipends (for clinical traveler workers only), Medical, Dental, Vision, 401K [include any compulsory benefits such as commissions, incentive bonuses, etc. if applicable]. Required Education: Bachelors degree in Industrial Engineering, Business/Healthcare Administration, Life Sciences or equivalent Medical Foundation, Physician Practice or Health Plan related experience Schedule Notes: 2 Openings for Quality Management Team - Roles are very specific - candidates must have in-depth experience in Clinical Quality Improvement in a hospital inpatient setting. Contract to Hire opportunities for the right talent. 100% Onsite *Candidates must possess all 4 of the below or they will not be considered: 1. Completed PI training and certification (six sigma, lean, CPHQ, Masters in Improvement) from nationally recognized organizations (e.g., ASQ). 2. Current or past formal position in Quality Improvement/Performance improvement (minimum 2 years) 3. History of leading and improving quality outcome metrics such as readmissions, mortality, hospital acquired conditions (infections, falls, pressure injuries, medication errors), sepsis care, venous thromboembolism, unplanned extubations, delirium, complications, c-section, exclusive breastfeeding, etc). 4. Experience using key driver diagrams, pareto charts, excel pivot tables, project management tools.

Job Description Job Title: Program Manager Quality Improvement Job Type: Contract to Hire Department: Quality Management Schedule: Full Time Hourly Rate: $90- $100/hr depending on experience Required Experience: - Candidates must have in-depth experience in Clinical Quality Improvement in a hospital inpatient setting. *Candidates must possess all 4 of the below or they will not be considered: 1. Completed PI training and certification (six sigma, lean, CPHQ, Masters in Improvement) from nationally recognized organizations (e.g., ASQ). 2. Current or past formal position in Quality Improvement/Performance improvement (minimum 2 years) 3. History of leading and improving quality outcome metrics such as readmissions, mortality, hospital acquired conditions (infections, falls, pressure injuries, medication errors), sepsis care, venous thromboembolism, unplanned extubations, delirium, complications, c-section, exclusive breastfeeding, etc). 4. Experience using key driver diagrams, pareto charts, excel pivot tables, project management tools. Required Education: - Bachelor's degree in Industrial Engineering, Business/Healthcare Administration, Life Sciences or equivalent Medical Foundation, Physician Practice or Health Plan related experience Preferred Skills & Experience: -Master's degree in Industrial Engineering, Business/Healthcare Administration, or Public Health -Consulting experience Please apply online and email resume to: *************************************

Not remote Must be a USA Citizen Salary $79K to $118K plus bonus and benefits Six Sigma Certification QA Manager has managerial oversight of the Irvine site Quality Assurance organization and the Quality Assurance Department within it. The Quality Assurance responsibilities for a manufacturing plant in the aerospace and defense industry include developing, implementing, maintaining a robust quality system and measuring its effectiveness to assure that the products and processes meet internal quality standards and requirements established by customers and regulatory agencies. Our four pillars are Customer Centricity, Operational Excellence, Innovation, and People. Responsibilities: Manage a highly focused site quality organization, aligned with overall global quality expectations. Directly Manage Quality Engineers, Inspection Supervisor and inspectors. Coordinating their activities and schedules to support the Site Production and Customer needs. Ensures the products & services provided to customers meet customer requirements and regulatory standards at both the production & product evaluation level. Ensures the compliance to Quality objectives (quality costs, product defects, customers satisfaction, etc) the effectiveness of corrective measures, and compliance to AS9100 as well as MIL-STD- 790. Coordinates the fulfillment of the Inspection Procedures (Raw Material and/or Processes & Final Product) to ensure the Quality Requirements are achieved and maintained. Develops and analyzes Process Performance through metrics of First Pass Yield, First Piece Inspection as well as using APQP methods. Supports the management of business quality systems and applicable certification systems (ISO, MIL, AS, etc) including the development, maintenance & updating of documentation, processes, and records. Represent the company before regulatory agencies (DLA, NavAir), Customers, and/or Certification Registrars. Manages and participates in failure analysis, complaints, resolution & information request from customers. Supports Continuous Improvement Programs, Lean Manufacturing, Six Sigma, etc. Manage customer escapes, Notices of escapement and develop reports to track progress of investigations as well as corrective measures, while ensuring accuracy and timeliness of reporting to internal and external customers. Manage day-to-day activities of the applicable organization including: goal setting, QE activity, Inspection activity and timeliness of those activities. Develop, groom, train and manage talent by providing coaching and mentoring to build strong performing teams Works effectively in a highly cross-functional environment, balancing multiple goals and priorities. US Citizen BS degree in a technical field Strong managerial, communication and reporting skills Overall technical experience in manufacturing processes and materials used in the connector industry. 3-5 years of direct experience in a Manufacturing/Quality 5 years of management experience leading highly focused technical organizations Direct experience with APQP practices Small assembly manufacturing Proficient in Microsoft Word, Excel and PowerPoint. Experience in MS Project a plus Lean Six Sigma certification Familiarity with military, industry and aerospace standards such as Mil-STD-790, AS9100, ISO9001 and ISO17025 Experience with DLA or other Qualifying Activities as it relates to Mil qualified products Span of Control: 8 - 12 engineers and technicians

Kennedy Jenks is seeking a Drinking Water Process Engineer to join our team in California and contribute to projects focused on drinking water treatment, water reuse, and advanced water purification. This role offers the opportunity to work on both local and national projects, applying your technical expertise to complex water treatment challenges. Candidates at all stages of their career who are ready to take on increasing technical responsibility, contribute to innovative solutions, and collaborate with experienced engineers are encouraged to apply. Key Responsibilities Contribute technical expertise in municipal drinking water treatment, water reuse, and advanced water purification, including evaluating treatment processes, selecting appropriate methods, conducting engineering studies, and optimizing operations. Support project teams and client service managers in project pursuits, meetings, and technical discussions. Participate in feasibility studies, facility planning, and pilot testing for water treatment projects. Prepare technical deliverables, including basis of design reports, preliminary and detailed engineering drawings, specifications, process flow diagrams, and process instrumentation diagrams. Evaluate and optimize operations of existing water treatment facilities. Provide guidance and mentorship to less experienced engineers when appropriate, and collaborate with senior engineers on technical solutions. Stay current on industry standards, emerging technologies, and regulatory requirements. Qualifications BS or MS in Civil, Environmental, Chemical Engineering, or related discipline 5+ years of experience in drinking water treatment engineering, including process design, system optimization, or operational evaluation Engineer-in-Training (EIT) or Professional Engineer (PE) license; PE preferred or ability to obtain Strong technical, analytical, and problem-solving skills Ability to work collaboratively on multidisciplinary teams and communicate effectively with clients and project staff Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. Salary range for this position is expected to be between $120,000 and $210,000, and may vary based upon education, experience, qualifications, licensure/certifications, and geographic location. This position is eligible for performance and incentive compensation. Benefits Summary: Kennedy Jenks offers a comprehensive benefits package, including medical, dental, vision, life and disability insurance, 401k, bonus opportunities, tuition reimbursement, professional registration support, a competitive PTO and holiday plan, and other benefits and programs. #LI-hybrid

Primary contact for engineering support of In-Process Inspectors. Support production efforts and process improvements (trend analysis, process validation, SPC). Coordinate In-Process MRB acitvities. Support Quality Systems (perform audits, SOP improvement, training, CAPA investigations). Ensure from the Quality prospective the transfer of new products from R&D to Production. Support Statistical Techniques and SPC interpretation. Present PPR and Management Review. 0-1 years of industry experience in ISO-9001 environment, preferably medical device. Bachelor of Science or higher degree in ME, IE or equivalent. This position will be a line support engineer. QualificationsEnter qualifications here Additional Information

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Summary Description: Reporting to the Quality Supervisor, the Quality Technician is responsible for overseeing day-to-day quality operations for the production lines including the implementation and monitoring of food safety and food quality, sanitation and batching systems to facilitate compliance with company objectives and regulatory requirements. Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ensure all products conform to the customer specifications as outlined in SAP system. Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. Perform analytical tests required to qualify ingredient batches for production. Perform production line checks at specified intervals. Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. Maintain laboratory cleanliness at all times. Report all out of specification results to designated leadership. Complete special projects and other reasonable duties as assigned by leadership. Required Skills: Working knowledge of Excel, Word, and SAP preferred. Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. Organized and detail oriented, adaptable to change. High level of precision and accuracy in inspection and testing processes. Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations Understanding of Food Safety Requirements. Able to read and understand metric system. Food or beverage laboratory experience preferred. Competencies: Technical: Skilled in maintaining accurate and detailed records of inspections and tests Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. Adaptability: Flexibility to adapt to changing production environments and requirements. Communication: Clear and concise communication with production staff and management Education and Experience: Highschool diploma or equivalent. 1 - 3 years of experience in Quality within a manufacturing environment preferred. In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: Pay Rate: $22.61 an hour Status: Non-Exempt •Medical/Dental/Vision Insurance •Health Savings Accounts and Flexible Spending Accounts •Life and AD&D Insurance, critical illness, hospital indemnity, and accident insurance •Short-term disability and long-term disability •Pet Insurance •Legal Benefits •401(k) Savings Plan with Company Match • 11 Paid Holidays • 5 Vacation Days and Paid (Sick) Time Off Days in accordance with applicable law •Well-being Benefit •Discount and Total Reward Programs The applicant who is hired will receive wages within the range that will be based on several factors, including, as applicable, criteria such as years and type of experience, relevant education, training, qualifications, certifications/licensing, skills, geographic location, performance, market considerations, seniority system, merit system, type of shift worked, systems that measure earnings by quantity or quality of production, and business or organizational needs (such as whether the position requires regular and necessary travel). How to apply: www.refrescocareers.com Application deadline: October 17, 2025 (the application deadline is a good-faith estimate and may be extended in certain circumstances) Join Refresco TODAY and enjoy a rewarding CAREER! Refresco Beverages US Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

Jobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Materials & Process Engineer applies their technical knowledge and expertise in structural bonding to support components across our vehicle. This role works toward building and implementing conventional and novel materials and process solutions while working with our partners to ensure delivered hardware that meets requirements that leads to the certification and production of new AAM vehicles. This position collaborates with all Engineering verticals & Supply Chain teams during the design process. This position will be required to work on-site 5 days a week. What you can do: Author material specifications and process specifications that support manufacturing & ensure quality Evaluate materials across the vehicle to satisfy design requirements Support test plan execution for composites and structural bonding, method development, materials characterization, allowable generation, and design validation Author test reports and other summaries to communicate information to the broader engineering team Participate in design reviews for hardware components/assemblies Support supplier selection, development, qualifications, and ongoing evaluations Support the manufacture of hardware both in-house and at suppliers Participate in industry working groups, standards bodies, and relevant technical conferences and symposia to maintain awareness of technology developments & regulatory trends across academia and industry May require up to 25% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in STEM or related field required Minimum three (3) years of related experience (an equivalent combination of education and experience may be considered) Experience working with technicians Experience developing a Design of Experiments plan Experience running and analyzing data from analytical materials characterization equipment Technical knowledge in one or more of the areas of: adhesives, composites, structural bonding Hands on experience with composite layup and bonding Familiarity with 3D CAD software (CATIA, SolidWorks, NX, or similar) Familiarity with statistical software, including Minitab, JMP, or similar Knowledge of CMH-17, SAE, ASTM, and other standard bodies Proficiency in writing R&D work instructions and documentation of R&D work Proficiency MS Office Suite tools such as Word, Excel, Project & Visio Understanding of a “First Principles” approach to problem solving Proactive and efficient delivery of communication and follow-up Excellent organizational skills and attention to detail Must have the ability to independently prioritize and accomplish work in a timely manner You may also be able to contribute: Six Sigma Green Belt or higher preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is: $133,120 - $186,160 USD Click HERE or visit: *********************************** to view our benefits!

RxSight is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world's first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company's mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: Performs quality functions to support IS013485, FDA, CGMP, Quality System Regulations, management reporting, LAL production/QA/QC, chemistry QA/QC, product release, in-process inspection, incoming inspection, quality process improvements for LDD, manufacturing transfer, and facility support. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Read, comprehend, and follow documents related to manufacturing, inspection and quality systems for audits, compliance, and implementation. * Audit and approve production records. * Verify production process via auditing/observation and testing. * Inspect process output and product parameters against specifications. * Ensure routine compliance with process steps and proper documentation of records. * Maintain raw material lot information, monitor expiration date, and quarantine inventory when materials are expired. * Performs incoming inspection on raw materials and incoming sub-assemblies/finished goods. * Collect data for process, quality system, manufacturing quality and performance metrics and generate reports for management review. * Identify non-conformances, deviations, non-compliance, lack of calibration etc. and propose corrective actions to management. * Facilitate Manufacturing Review Board and supports non-conformance decision process. * Govern and transact materials physically and through electronic system. * Monitors laboratory and engineering equipment to ensure compliance with preventive maintenance and calibration programs. * Performs laboratory notebook audits, inventory audits, and maintains QA retains. * Take initiatives for the process improvements changes as related to manufactured components and finished products for LAL. * Responsible for assisting the Quality Assurance team with any ad hoc reports and assignments as required. * Perform incoming inspection and lot control activities of materials and parts. * Assist Quality, Manufacturing and R&D groups in running validation, verification, and developmental studies, and defining processes. * Development of inspection techniques and transfer to production and everyday use. * Monitor gowning and cleanroom logbook check per SOP to ensure all section of the cleaning log has been filled accurately and completely. * Provide Good Manufacturing Practices (GMP) and Quality Standard Operating Procedures (SOP) training to relevant department. * Create and review First Article Inspection Reports when necessary. Requirements REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. * Prior experience of working in cleanroom environment and/ or medical device manufacturing is highly preferred. * Professional, responsible, energetic, and accountable. * Excellent communication skills. * Intellectually curious and eager to learn. * Individual must be Quality oriented and possess a natural ability to pay attention to details. EDUCATION, EXPERIENCE, and TRAINING: * Associate degree (A.A.) or equivalent from a two-year college or technical school; six months to one-year related experience and/or training; or equivalent combination of education and experience. * Experience within a medical device company or regulated industry preferred. * Microsoft Word; Microsoft Excel * Training to be completed per the training plan for this position as maintained in the document control system. * The training requirements on TRN-10007 Insider Trading Policy, TRN-10008 Global Anti-Bribery and Anti-Corruption Policy and TRN-10009 Code of Business Conducts and Ethics must be diligently completed within 30 days from the hiring date and on an annual basis COMPUTER SKILLS: * Microsoft Word; Microsoft Excel; Microsoft Access; QuickBooks. Notice to Staffing Agencies and Search Firms: RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight's Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances. Salary Description $25.00 to $27.00 per hour

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Under general supervision, manage specific projects/tasks associated with continuous improvement and/or production sustainment; perform experiments and tests; record experimental data; make calculations and prepare brief reports covering the work. This position will report to the Director of Business Development in support of UDRI. Responsibilities: Develop and/or improve processes for the manufacture of new or existing products. Work with cross-functional teams (primarily Quality and Production) in leading efforts in improving product quality and customer satisfaction. Conduct root cause analysis and implement countermeasures to prevent failure recurrence. Develop and implement concepts, including Lean Manufacturing, etc., to reduce manufacturing cost and increase process throughput. Create/manage manufacturing documentation, and provide technical oversight to bring high priority projects to a successful conclusion including training. Lead manufacturing trials supported by data analysis and recommend appropriate next steps. Work in a proactive manner to manage the technical direction of assigned manufacturing areas, in concert with the overall technical direction of the site. Plan and lead the incorporation of engineering flowdown requirements to ensure on time delivery. Expanded technical competency of processes, materials, and products. Increased capability in workload management. Other essential duties may be assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: B.S. degree in Engineering or Science (Chemical, Mechanical, Material Science, Aerospace, Manufacturing, or Industrial Engineering fields) 2 to 4 years working experience in a manufacturing or laboratory environment Excellent verbal and written communication skills Strong mechanical aptitude and hands on mentality Ability to adjust to continuously shifting priorities Proficient computer skills - Microsoft suite (Word, Excel, PowerPoint, Project) Comfortable working on and around equipment and using proper PPE Ability to adjust to continuously shifting priorities Experience with composite materials and/or material sciences a plus Programming experience a plus (VBA, C or C++, etc) CAD experience a plus (CATIA, Solidworks, AutoCAD, etc) SAP experience a plus Knowledge of Lean Manufacturing principles a plus Minitab software experience a plus ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Job Description Sunny Sky Products prides itself on our commitment and dedication to creating, manufacturing and delivering top quality products in the beverage industry. We have generated an extensive product portfolio that includes frozen dispensed beverages, cold dispensed, hot dispensed and beverage enhancers. The Company is seeking an organized, deadline oriented, self-starter to work in a fast-paced environment. An ideal candidate must possess excellent attention to detail; be able to read, write, understand, and speak English; and be able to handle raw ingredients. This individual will need to be able to perform all duties assigned and take a personal initiative in ensuring Quality Assurance compliance throughout the plant. In addition, the candidate should be able to update GMP's, SOP's, SSOP's, COA's etc. as well as audit for compliance. This candidate will report to the Quality Assurance Lead as well as the Quality Assurance Manager. Hours Full time job Monday- Friday 6AM- 2:30PM 8-hour shift plus occasional overtime Weekend availability as needed Salary $23.50/hr. New hire Bonus program up to $500.00 Benefits Medical, Dental & Vision Coverage Life Insurance 10 Paid Holidays PTO - Vacation Time Sick Pay 401K Program Company STD & LTD (Short term & Long-term disability) Basic Life Insurance & AD&D Insurance Perfect Attendance Monthly Bonus Program up to $100.00 Employee Referral Bonus Program up to $500.00 For more information about our company please visit our website at ************************ Sunny Sky Products is an equal-opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship.

Job Description Responsible for establishing and continuing eective quality improvement eorts to achieve organizational performance goals and national top decile performance in clinical excellence. Quality improvements may be small or large scale and are in alignment with Hoags strategic goals for example, addressing 30-day readmissions and mortality reduction. The Quality Improvement Manager may apply Lean, Six Sigma, and other quality improvement methodologies to deliver results. Job Responsibilities: Coaches and trains teams in the utilization of improvement tools and implementation of improvements. Manages plans and develops guidelines, process measures, targets, and standards for monitoring and measuring results to deliver on goals. Interacts daily with leaders, to identify, dene, and manage opportunities to improve quality while helping create a strategic approach to produce and establish extraordinary improvement. The Program Manager Quality Improvement collaborates to lead and organize eorts for continuous clinical improvement. Skills: Required Skills & Experience: Advanced training or experience in performing statistical, financial and strategic analysis Five years experience in performance/process improvement projects including but not limited to Lean, Six Sigma methodologies Demonstrated performance improvement and process improvement skills and knowledge of methodologies such as Lean, Six Sigma, DMAIC, and PDCA Highly proficient in Microsoft Project and the Microsoft Office Suite (Word, Excel, PowerPoint, Visio) Comprehensive digital marketing skills Preferred Skills & Experience: Experience managing healthcare-related projects and familiarity with healthcare provider industry Seven years experience in performance/process improvement projects preferred. Education: Required Education: Bachelors degree in Industrial Engineering, Business/Healthcare Administration, Life Sciences or equivalent Medical Foundation, Physician Practice or Health Plan related experience Preferred Education: Masters degree in Industrial Engineering, Business/Healthcare Administration, or Public Health Consulting experience OR Masters degree in Healthcare Administration or Public Health. Required Certifications & Licensure: N/A Preferred Certifications & Licensure: Certifications in Lean and/or Six Sigma Methodology Project Management Professional (PMP) certification This is the pay range that RightSourcing (a part of Magnit) reasonably expects to pay someone for this position, however, as a supplier your expected pay range may vary and/or include certain benefits like: Stipends (for clinical traveler workers only), Medical, Dental, Vision, 401K [include any compulsory benefits such as commissions, incentive bonuses, etc. if applicable]. Schedule Notes: 2 Openings for Quality Management Team - Roles are very specific - candidates must have in-depth experience in Clinical Quality Improvement in a hospital inpatient setting. Contract to Hire opportunities for the right talent. 100% Onsite *Candidates must possess all 4 of the below or they will not be considered: 1. Completed PI training and certification (six sigma, lean, CPHQ, Masters in Improvement) from nationally recognized organizations (e.g., ASQ). 2. Current or past formal position in Quality Improvement/Performance improvement (minimum 2 years) 3. History of leading and improving quality outcome metrics such as readmissions, mortality, hospital acquired conditions (infections, falls, pressure injuries, medication errors), sepsis care, venous thromboembolism, unplanned extubations, delirium, complications, c-section, exclusive breastfeeding, etc). 4. Experience using key driver diagrams, pareto charts, excel pivot tables, project management tools

Primary contact for engineering support of In-Process Inspectors. Support production efforts and process improvements (trend analysis, process validation, SPC). Coordinate In-Process MRB acitvities. Support Quality Systems (perform audits, SOP improvement, training, CAPA investigations). Ensure from the Quality prospective the transfer of new products from R&D to Production. Support Statistical Techniques and SPC interpretation. Present PPR and Management Review. 0-1 years of industry experience in ISO-9001 environment, preferably medical device. Bachelor of Science or higher degree in ME, IE or equivalent. BS degree required in either engineering or a related scientific field. This will be for a line support engineer

Company DescriptionJobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Materials & Process Engineer applies their technical knowledge and expertise in structural bonding to support components across our vehicle. This role works toward building and implementing conventional and novel materials and process solutions while working with our partners to ensure delivered hardware that meets requirements that leads to the certification and production of new AAM vehicles. This position collaborates with all Engineering verticals & Supply Chain teams during the design process. This position will be required to work on-site 5 days a week. What you can do: Author material specifications and process specifications that support manufacturing & ensure quality Evaluate materials across the vehicle to satisfy design requirements Support test plan execution for composites and structural bonding, method development, materials characterization, allowable generation, and design validation Author test reports and other summaries to communicate information to the broader engineering team Participate in design reviews for hardware components/assemblies Support supplier selection, development, qualifications, and ongoing evaluations Support the manufacture of hardware both in-house and at suppliers Participate in industry working groups, standards bodies, and relevant technical conferences and symposia to maintain awareness of technology developments & regulatory trends across academia and industry May require up to 25% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in STEM or related field required Minimum three (3) years of related experience (an equivalent combination of education and experience may be considered) Experience working with technicians Experience developing a Design of Experiments plan Experience running and analyzing data from analytical materials characterization equipment Technical knowledge in one or more of the areas of: adhesives, composites, structural bonding Hands on experience with composite layup and bonding Familiarity with 3D CAD software (CATIA, SolidWorks, NX, or similar) Familiarity with statistical software, including Minitab, JMP, or similar Knowledge of CMH-17, SAE, ASTM, and other standard bodies Proficiency in writing R&D work instructions and documentation of R&D work Proficiency MS Office Suite tools such as Word, Excel, Project & Visio Understanding of a “First Principles” approach to problem solving Proactive and efficient delivery of communication and follow-up Excellent organizational skills and attention to detail Must have the ability to independently prioritize and accomplish work in a timely manner You may also be able to contribute: Six Sigma Green Belt or higher preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is:$133,120-$186,160 USD Click HERE or visit: *********************************** to view our benefits!

Job DescriptionDescription: RxSight is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world's first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company's mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: Performs quality functions to support IS013485, FDA, CGMP, Quality System Regulations, management reporting, LAL production/QA/QC, chemistry QA/QC, product release, in-process inspection, incoming inspection, quality process improvements for LDD, manufacturing transfer, and facility support. ESSENTIAL DUTIES AND RESPONSIBILITIES: Read, comprehend, and follow documents related to manufacturing, inspection and quality systems for audits, compliance, and implementation. Audit and approve production records. Verify production process via auditing/observation and testing. Inspect process output and product parameters against specifications. Ensure routine compliance with process steps and proper documentation of records. Maintain raw material lot information, monitor expiration date, and quarantine inventory when materials are expired. Performs incoming inspection on raw materials and incoming sub-assemblies/finished goods. Collect data for process, quality system, manufacturing quality and performance metrics and generate reports for management review. Identify non-conformances, deviations, non-compliance, lack of calibration etc. and propose corrective actions to management. Facilitate Manufacturing Review Board and supports non-conformance decision process. Govern and transact materials physically and through electronic system. Monitors laboratory and engineering equipment to ensure compliance with preventive maintenance and calibration programs. Performs laboratory notebook audits, inventory audits, and maintains QA retains. Take initiatives for the process improvements changes as related to manufactured components and finished products for LAL. Responsible for assisting the Quality Assurance team with any ad hoc reports and assignments as required. Perform incoming inspection and lot control activities of materials and parts. Assist Quality, Manufacturing and R&D groups in running validation, verification, and developmental studies, and defining processes. Development of inspection techniques and transfer to production and everyday use. Monitor gowning and cleanroom logbook check per SOP to ensure all section of the cleaning log has been filled accurately and completely. Provide Good Manufacturing Practices (GMP) and Quality Standard Operating Procedures (SOP) training to relevant department. Create and review First Article Inspection Reports when necessary. Requirements: REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Prior experience of working in cleanroom environment and/ or medical device manufacturing is highly preferred. Professional, responsible, energetic, and accountable. Excellent communication skills. Intellectually curious and eager to learn. Individual must be Quality oriented and possess a natural ability to pay attention to details. EDUCATION, EXPERIENCE, and TRAINING: Associate degree (A.A.) or equivalent from a two-year college or technical school; six months to one-year related experience and/or training; or equivalent combination of education and experience. Experience within a medical device company or regulated industry preferred. Microsoft Word; Microsoft Excel Training to be completed per the training plan for this position as maintained in the document control system. The training requirements on TRN-10007 Insider Trading Policy, TRN-10008 Global Anti-Bribery and Anti-Corruption Policy and TRN-10009 Code of Business Conducts and Ethics must be diligently completed within 30 days from the hiring date and on an annual basis COMPUTER SKILLS: Microsoft Word; Microsoft Excel; Microsoft Access; QuickBooks. Notice to Staffing Agencies and Search Firms: RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight's Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances.