Quality engineer jobs in Simi Valley, CA

***Onsite 8-5 PM Local time**** Top 3 Must Have Skill Sets: ***Post graduation experience require*** 1. laboratory experience using analytical equipment 2. evidence of good communication e.g. writing documents and sharing results 3. college degree in engineering or similar (chemical engineer, bio engineer, pharmaceutical science, etc) We are seeking a skilled Process Development Engineer who can work independently to support technical projects. The ideal candidate will have expertise in laboratory testing, drug product fill finish processing, holistic drug product process knowledge, technical transfer, and drug product manufacturing. Excellent communication skills and proficiency in technical writing are essential for this role. Author, data verify, and review guideline documents, technical protocols, reports, product impact assessments. Execute laboratory analytical testing such as: viscosity, protein concentration, pH, osmolality. Execute laboratory experiments such as pipetting, formulation, filtration. Provide technical support for drug product process development, including formulation, filtration, and filling (vials/syringes/devices) of parenteral products. Assist in the development and characterization of drug product processes and the transfer of new technologies to commercial sterile fill/finish sites. Support process development for commercial drug product processing in areas such as sterile processing, process characterization, tech transfer, and validation. Collaborate with manufacturing and support functions to provide coordinated support for commercial drug product manufacturing operations and technology transfer. Participate in global cross-functional teams, working effectively in a highly matrixed team environment to drive efficiency and foster strong relationships. Troubleshoot issues with drug product processing technologies and equipment, utilizing data-driven analyses and visualizations to determine true root causes. Enable Skills-Based Hiring No Basic Qualifications Master degree OR Bachelor degree and 2 years of experience OR Associate degree and 6 years of experience OR High school diploma / GED and 8 years of experience

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Under general supervision, manage specific projects/tasks associated with continuous improvement and/or production sustainment; perform experiments and tests; record experimental data; make calculations and prepare brief reports covering the work Responsibilities: Develop and/or improve processes for the manufacture of new or existing products. Work with cross-functional teams (primarily Quality and Production) in leading efforts in improving product quality and customer satisfaction. Conduct root cause analysis and implement countermeasures to prevent failure recurrence. Develop and implement concepts, including Lean Manufacturing, etc., to reduce manufacturing cost and increase process throughput. Create/manage manufacturing documentation and provide technical oversight to bring high priority projects to a successful conclusion including training. Lead manufacturing trials supported by data analysis and recommend appropriate next steps. Work in a proactive manner to manage the technical direction of assigned manufacturing areas, in concert with the overall technical direction of the site. Plan and lead the incorporation of engineering flow down requirements to ensure on time delivery. Expanded technical competency of processes, materials, and products. Increased capability in workload management. Other essential duties may be assigned. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: B.S. degree in Engineering or Science (Chemical, Mechanical, Material Science, Aerospace, Manufacturing, or Industrial Engineering fields) 2 to 4 years working experience in a manufacturing or laboratory environment Excellent verbal and written communication skills Strong mechanical aptitude and hands on mentality Ability to adjust to continuously shifting priorities Proficient computer skills - Microsoft suite (Word, Excel, PowerPoint, Project) Comfortable working on and around equipment and using proper PPE Ability to adjust to continuously shifting priorities Experience with composite materials and/or material sciences a plus Programming experience a plus (VBA, C or C++, etc) CAD experience a plus (CATIA, Solidworks, AutoCAD, etc) SAP experience a plus Knowledge of Lean Manufacturing principles a plus Minitab software experience a plus ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

In today's market, there is a unique duality in technology adoption. On one side, extreme focus on cost containment by clients, and on the other, deep motivation to modernize their Digital storefronts to attract more consumers and B2B customers. As a leading Modernization Engineering company, we aim to deliver modernization-driven hypergrowth for our clients based on the deep differentiation we have created in Modernization Engineering, powered by our Lightening suite and 16-step Platformation™ playbook. In addition, we bring agility and systems thinking to accelerate time to market for our clients. Headquartered in Bengaluru, India, Sonata has a strong global presence, including key regions in the US, UK, Europe, APAC, and ANZ. We are a trusted partner of world-leading companies in BFSI (Banking, Financial Services, and Insurance), HLS (Healthcare and Lifesciences), TMT (Telecom, Media, and Technology), Retail & CPG, and Manufacturing space. Our bouquet of Modernization Engineering Services cuts across Cloud, Data, Dynamics, Contact Centres, and around newer technologies like Generative AI, MS Fabric, and other modernization platforms. Job Title- Sr Observability Engineer /Senior Site Reliability Engineer Location- Westlake, CA Ideal Experience: Bachelor's degree in computer science, Engineering, or a related field (or equivalent experience). 7+ years of experience in a Cloud Engineering role (Observability, DevOps, SRE, etc). Proven New Relic Expertise: 3+ years of hands-on experience with the New Relic platform, including deep knowledge of Dashboards, NRQL, APM and setting up effective alerting. Strong IaC Proficiency: 3+ years of experience managing infrastructure and configurations with IaC tools like Terraform/OpenTofu (preferred), AWS CDK, CloudFormation, Chef or Ansible. Cloud Platform Experience: Extensive hands-on experience working with major cloud providers such as AWS (preferred), GCP, or Azure. Scripting Skills: Proficiency in a scripting language such as Python, Go, or Bash for automation and tooling. System Knowledge: Strong understanding of cloud architecture, networking principles, Windows/Linux Server administration, microservices in a SaaS context, containerization (Docker, Kubernetes), and CI/CD principles. Security & Compliance experience: Deep understanding of security best practices and their implementation in cloud infrastructure and CI/CD pipelines. Experience working in complexly regulated environments. Excellent problem-solving and troubleshooting skills. Strong communication and collaboration skills. Why join Sonata Software? At Sonata, you´ll have an outstanding opportunity. The chance to use your skills and imagination to push the boundaries of what´s possible. To build never seen before solutions to some of the world's toughest problems. You´ll be challenged, but you will not be alone. You´ll be joining a team of diverse innovators, all driven to go beyond the status quo to craft what comes next. Sonata Software is an Equal Opportunity Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity, age, religion, disability, sexual orientation, veteran status, marital status, or any other characteristics protected by law.

A large pharmaceutical company in Los Angeles is in immediate need of a CQV Engineer for a 12-month project, this is an onsite position and is 40 hours/week. The client needs someone with Facilities CQV experience including EMPQ, Vessel IOV and IOPQ including mixing and temp mapping. They have personnel assigned to Utilities (WFI, Alcohol, N2, Compressed Air, etc.), CIP, Filter Press, Centrifuge, CIP skids and Cleaning Validation; this experience is preferred in case they need additional support. The project also requires daily job walks of the construction site daily in full PPE. Top Requirements: BS degree minimum 3-10 years of Validation Engineering experience in pharmaceutical industry Strong skill set in installation and IQOQ of equipment like centrifuges, filter presses, and processing tanks Cleanroom qualification experience is a plus Very strong technical writing/documentation skills Very strong communication skills and ability to coordinate with cross-functional teams Experience doing job walks with engineers for capital projects Must have a positive attitude and ability to multi-task Must be committed to supporting a long-term project that could go for 2 years Must be available to support other shifts as requested by the client, this could happen on short notice

This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects as defined under the BuildLACCD Bond Program. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance & Operations (M&O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with LACCD's Capital Construction Bond Program requirements and legal limitations governing bond fund expenditures. Position Description: Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations. Implement the electrification of central plants and other building systems outlined in the Board of Trustees' Clean Energy Resolution passed in July 9, 2020. Apply knowledge of Sustainable Building Principles and Standards to assist with complex systems level issues. Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives. Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency. Understand Title 24 and ASHRAE recommendations. Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines. Assist College Project Teams (CPT's) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC's), Change Orders, etc. Travelling to and from project sites upon request of attending project and construction meetings. Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout. Perform electrical engineering analysis and technical reports supporting District design guidelines. Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls. Perform other related duties as assigned by the PMO and LACCD. Minimum Required Qualifications: Bachelor's Degree in in Electrical Engineering 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects. Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC), California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards. Preferred Qualifications: 2 years' experience in Educational Facility Construction Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS) California Professional Engineering (PE) license in Electrical Engineering Benefits: Compensation: Salary between $140,000 - $155,000 per year. This is an exempt position. The payroll cycle is every two weeks. Holidays: Eight (8) paid holidays per year. Personal Time-Off (PTO): 120 Hours paid PTO for vacation and sick time. Accrual begins on the first day of employment. Additional PTO will follow Owais Construction Group policy and procedures. License, Certificate, and Professional Development: Owais Construction Group will reimburse you for license and/or certificate renewal fees and industry-related education, with a passing grade of B or above, up to $1,000 per year. Insurance: Participation in the Owais Construction Group medical, dental, and vision insurance(s). Owais Construction Group provides paid medical and heavily discounted premiums for dental and vision coverage. We currently carry Kaiser and Anthem Blue Cross plan options. 401(k) Plan: Owais Construction Group will make a matching contribution equal to 100% of your salary deferrals up to 3% of your compensation plus 50% of your next 2% salary deferrals. For example, if you defer 5%, your total match will equal 4% of your compensation. Employee discount.

This role is designed for Second Shift. The Quality Technician II supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. Position Responsibilities Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks. Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database. Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers. Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms. Support DCMA Source Inspection process Coordinates with Shipping and Contracts department as needed to ensure timely delivery. Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection. Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system. Develops and maintains process instructions for quality-related activities Works on assignments that are semi-routine in nature Other duties as assigned Basic Qualifications (Required Skills & Experience) High School Diploma or GED equivalent 1 - 2 years of related work experience or equivalent combination of education, training, and experience Demonstrated expertise in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 Basic knowledge of FAI validation and verification process requirements Strong computer skills and is proficient in MS Office Suite (Word, Access, PowerPoint, Excel) Basic knowledge of engineering drawings and specification systems Must be able to fill out the necessary flight test documentation Must be able to properly document any/all non-conformances encountered Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components. Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results Must able to work efficiently in a fast-paced, high-volume environment Required to travel to and from remote flying sites on a daily basis Must have a valid California driver's license and clean driving record Willingness to work overtime also a must Other Qualifications & Desired Competencies 2 year technical degree desired; Quality system courses and/or equivalent experience preferred Aerospace quality management system experience (AS9100DD) and/or internal audit experience is preferred Solid ability to accurately record and manage data, records, files and other documents to support tasks Has an analytical approach to problem solving and high organizational skills as well as effective time management, interpersonal and communication skills Strong ability to manage time and prioritize tasks Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Plans, coordinates, and directs quality control program designed to ensure continuous quality of products consistent with established standards by performing the following duties personally or through subordinate supervisors. Key Responsibilities Develops and analyzes statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished product. Formulates and maintains quality control objectives complementary to industry policies and goals. Creates and implements inspection criteria and procedures. Facilitates airline audits. Interprets quality control philosophy to key personnel in organization. Coordinates objectives with production procedures in cooperation with other plant managers to maximize product reliability and minimize costs. Provides inspection activity for product throughout service cycle. Directs workers engaged in inspection and testing activities to ensure continuous control over materials, facilities, and products. Analyzes and interprets test data from quality checks on warranty items to determine cause and corrective action, and codes work orders as to responsibility and work to be performed. Maintains and revises accordingly the quality control procedure manuals. Analyzes and interprets new manual revisions and revises test records accordingly. Works with vendors to insure quality of all purchased parts for company use. Creates and directs environmental test functions. Designs and implements quality control training programs to key personnel in conjunction with managers. Coordinates, assists and manages quality audits from customer's representatives. Investigates and adjusts customer complaints regarding quality. Abilities & Qualification Ability to coordinate and work well with other departments and individuals within organization. Have strong team orientation. Proficiency in computer skills (MS Work, Office, Excel). Ability to read, write and understand English and computer literacy is required. Have strong communication and interpersonal skills. Willing to learn and self motivated. Good attitude and always have service mind. Ability to work overtime, shift/weekends when needed. Education Bachelor's degree (B.A./B.S.) or equivalent; or four or more years related experience and/or training; or equivalent combination of education and experience. Minimum 6 years' experience working with FAA.

Quality Assurance & Regulatory Manager Valencia & Burbank, CA Company Benefits 100% employer paid medical and dental 401(k) matching contribution Generous PTO and paid holidays Long-term disability Life and AD&D Health Care and Dependent Care Flex Spending Tuition reimbursement Profit-sharing program Pay: $110,000 - $150,000 annually (DOE) Position is Onsite Company Overview Contributing to Saving Lives The Eckert & Ziegler Groupis one of the world's largest providers of isotope technology for medical, scientific, and industrial use. The core businesses of the Group are Diagnostic Nuclear Medicine Imaging, Cancer Therapy, and Industrial Radiometry. Business Segment Overview Eckert & Ziegler Isotope Products provides sealed and unsealed radiation sources and materials for Medical Imaging sources; Industrial sources for measurement and analysis; Oil Well Logging sources and related products; Reference, Calibration and Environmental Monitoring sources and solutions; Bulk radioisotopes for pharmaceutical, therapeutic and industrial product manufacturing; Services for collection, recycling and disposal of sources and low-activity waste; Sources for industrial Non-Destructive Testing; High-Activity radiation sources for radiation processing and sterilization; Medical and Industrial irradiators for blood irradiation, sterilization or calibration. The Job Eckert & Ziegler Isotope Products seeks a Quality Assurance & Regulatory Manager to join our team. The Quality Assurance and Regulatory Manager supports the Director of Quality Operations in maintaining an effective Quality Assurance (QA) program, and GMP Quality Management System which consistently delivers high quality company products. This person audits all activities to verify that appropriate current procedures are followed and keeps the Director of Quality Operations and other designates fully informed, through verbal and written reports and memoranda, on the status of QC, and QA and Regulatory activities, problems, and customer complaints. This person and their team assist in maintaining the companys GMP Quality Management System program. ESSENTIAL DUTIES: Operates under the guidance of the Director of Quality Operations as necessary, to assure compliance with the company GMP Quality Management System program. Keeps the Director of Quality Operations informed of activities through reports, memos, and meetings; Serves as back-up to the Director of Quality Operations. Acts as the Calibration Laboratory Management Representative for the company. Oversees on ISO 9001, MDSAP (ISO 13485, TG(MD) R Sch3, RDC ANVISA 665/2022, CMDR, Japan MHLW Ministerial Ordinance No. 169, FDA (21 CFR 820)), FDB, CA-RHB (Radiological Health Branch-product registrations, compliance, & licensing), Nuclear Regulatory Commission (NRC), Bureau of Industry & Security (BIS),DOT 49 CFR / IAEA, DAkkS / ISO 17025 , and Medical Device Directive (93/42/EEC) and Medical Device Regulation (EU 2017/745) CE Mark compliant Quality Management System. Manages and conducts cGMP and employee trainings. Maintains additional quality systems and compliance as required. Oversees the Regulatory Compliance Program, Corrective Action & Prevention Action (CAPAs) Program and the Internal Audit Program. Conducts internal and supplier audits, writes audit reports, issues CAPAs and trains internal auditors to conduct these activities. Conducts regulatory reviews and submits product registrations for NRC/CA-RHB SS&DRs, CMDR licenses, RMLs, FDA, MDD/MDR, import / export control, and others as applicable. Conducts customer license reviews and contacts regulatory agencies and customers as required. Applies for export licenses from BIS and NRC as required. Supports Special Form Radioactive Materials compliance. Supports the approval of capsule / package test report documentation and certificates. Oversees the companys Document Management Program. Oversees, manages, and conducts revision process of old procedures as necessary to maintain Quality Control and Quality Assurance of the products. Has final approval on all controlled procedures, procedure revisions, Engineering Drawings, and Engineering Change Orders. Supports all activities related to documentation control. Responsible for the Customer Complaints and Returns program. Evaluates customer complaints, with input from Sales as needed, and assist in the maintenance of the returned sources program. Has final approval of Complaints and Returns reports. Assists in scheduling, participating, follow-up, or leading audits as required. Manages the company wide training program by formulating and conducting Quality and Regulatory training. Interviews employment candidates and make hiring suggestions to upper management. Plans, assigns, and directs work. Sets / oversees department goals and objectives and work towards reaching those goals. Trains and motivates employees. Conducts employee performance appraisals. Rewards and disciplines employees, addressing complaints and resolving problems. Travel required at various times to Burbank and Valencia facilities, and for supplier audits and training. Performs other duties as required by management. Requirements: Minimum education (or substitute experience) required: Bachelors degree or equivalent in a scientific related field. Minimum experience required: 5 years of relevant experience in GMP, medical devices, or pharmaceuticals, preferably within a Regulatory-related field, with responsibilities for managing others. 5 years experience in handling GMP programs, including but not limited to product registrations and customer licensing for FDA, MDSAP and EU MDR (CE Marking), and other international markets. Abilities and skills required: Certified Lead Auditor. Must be able to travel and work in Burbank and in Valencia. Experience with compliance to MDSAP, European Medical Device Directives (MDD), EU MDR/IVD, FDA, QSR/QMSR, ISO standards, and other applicable regulatory requirements. Proven track record of agency interactions, product registrations. Experience in documentation and records administration. Customer service experience and handling customer complaints. Must be able to communicate clearly and succinctly and effectively over the phone, videoconference, and in writing with various clients including regulatory agencies. Strong interpersonal skills, with the ability to communicate effectively at all levels of the organization. Excellent problem solving, prioritizing, and time management skills. Ability to lead and conduct internal, supplier, and customer audits. Strong attention to detail. Experience in design control, manufacturing, process development, quality assurance, quality control. Ability to work independently and in a team environment. Excellent planning, organization, and flexibility to adjust to a rapidly changing environment. Proficient in Microsoft Dynamics or equivalent ERP system, Microsoft Office Suite applications (Word, Excel, PowerPoint), Teams, SharePoint, and SmartDraw or equivalent flowcharting program. Able to lift up to 50 lbs. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. To apply please click on the link below or copy and paste into your browser. ************************************************************************************************************************ Id=19000101_000001&job Id=574075&source=CC2=en_US Privacy Notice: To learn what data we collect and how we use it, review our Privacy Policy at ************************************ (To view, please copy and paste into your browser) Compensation details: 110000-150000 Yearly Salary PI13a13742d1e6-31181-39154300 RequiredPreferredJob Industries Other

About Northwood: Northwood is on a mission to transform connectivity between earth and space and bring the benefits of space to the masses through innovations in space communications technologies. If you like building quickly and seeing your work deployed in locations around the globe with real impact, we want you at Northwood. Role: We're looking for a Supplier Quality Program Manager to be Northwood's first quality-focused hire - a builder, systems thinker, and technical leader who will define how we scale manufacturing excellence across our global supply chain. You will create Northwood's supplier quality program from the ground up, partnering closely with engineering and operations to ensure our products are designed and built for long-term reliability. From designing scalable systems to defining rigorous standards, you'll establish the foundation for a world-class supplier quality organization and cultivate a company-wide culture of quality and accountability. As Northwood grows, you'll have the opportunity to build and lead a high-performing team, mentoring future engineers and shaping how high-reliability hardware moves from concept to production. You'll influence how quality scales across our global supply base and how it becomes woven into every stage of development and delivery. This is a foundational, high-impact role - perfect for someone who loves creating structure from ambiguity, leading through influence, and leaving a lasting mark on both our culture and the future of space communications. Responsibilities: Design and launch Northwood's first supplier quality management system, from process design to documentation and continuous improvement Shape the supply base: Identify, qualify, and develop world-class suppliers for RF, PCBA, mechanical, and electromechanical components Lead audits, performance reviews, and corrective actions that elevate quality and delivery across our network Partner closely with design, manufacturing, and operations on DFM, NPI, and pilot builds - ensuring every part is production-ready Define supplier KPIs (quality, cost, responsiveness) and implement real-time visibility tools that drive accountability and progress Act as the technical and quality liaison between internal engineering and external suppliers - turning insights into scalable, repeatable success Drive supplier readiness for production ramp-ups and capacity expansions as Northwood grows around the world Lead root cause analysis and corrective/preventive actions (NCR/CAPA) to eliminate defects and strengthen design for manufacturability Partner with suppliers on process improvements that cut costs, reduce cycle times, and maximize yields Establish quality requirements and flow downs that ensure every product built by our partners reflects Northwood's commitment to excellence Basic Qualifications: Bachelor's degree in Mechanical, Electrical, Industrial Engineering, or related field 7+ years in Supplier Quality, Supplier Development, or Manufacturing Quality roles Experience with quality standards and tools (e.g., ISO 9001, AS9100, PPAP) A track record of building or scaling quality systems in low-to-medium volume, high-complexity environments Proven success qualifying and managing suppliers and driving measurable performance improvement Willingness to travel up to 25% domestically and internationally to engage with our global supply network Preferred Qualifications: Background in aerospace, satellite, telecommunications, or defense industries Hands-on experience with RF, PCBA, custom enclosures, or electromechanical assemblies Familiarity with ERP, PLM, or digital quality management systems Experience supporting early-stage product development through production ramp Lean Six Sigma or similar certifications Strong data fluency - proficiency with SQL or analytics tools for supplier and quality insights

Job Summary and Responsibilities Are you a licensed healthcare professional with a passion for elevating standards and impacting patient lives? We're actively seeking a Quality Patient Safety Program Manager, Licensed. We rely on meticulous individuals. Your commitment to accuracy and attention to detail will shine through as you review patient records, distill complex information into clear case summaries, and rigorously uphold the confidentiality inherent in the peer review process. Success in this role hinges on your collaborative spirit. You'll work seamlessly with diverse groups, fostering productive relationships and building consensus around critical quality and safety initiatives. Job Requirements * Licensed Registered Nurse, Licensed Clinical Pharmacist, or other Licensed Clinical Staff, and three (3) years clinical experience in an acute care setting required. * Must be able to perform case reviews for medical staff peer review and medical and/or surgical Registry Abstraction required. * One (1) year of healthcare-related quality management/performance improvement experience (e.g., chart audit, PI team member, etc.) required. * CA License in the clinical field of practice. * Certified Professional in Healthcare Quality (CPHQ), Healthcare Quality and Management Certification (HCQM), or Certificate of Professional Healthcare Quality and Patient Safety (CPQPS) within 2 years of employment is required. * Fire Safety required. (must obtain within 90 days from start date) Required Knowledge & Skills * Knowledge and expertise of quality management/performance improvement methods, tools, and techniques (e.g., PDSA, Tests of Change, Six Sigma, LEAN) and ability to create and support an environment that meets the quality goals of the organization. * Current knowledge of data reporting and regulatory/accreditation requirements for acute and ambulatory care services, and federal, state, and local healthcare-related laws and regulations, and the ability to comply with these in healthcare practices and activities. * Knowledge of effective self-management practices and ability to manage multiple concurrent objectives, projects, groups, or activities, making effective judgments as to prioritizing and time allocation. * Understanding of the necessity and value of accuracy and attention to detail. Must be able to review patient records and provide case summaries, and maintain the confidentiality of the peer review process. * Knowledge of the techniques and the ability to work with a variety of individuals and groups constructively and collaboratively. * Knowledge of the current situation or issue at hand; ability to take full personal responsibility or ownership for assignments, activities, decisions, and results. * Knowledge of techniques and tools that promote effective analysis and the ability to determine the root cause of organizational problems and create alternative solutions that resolve the problems in the best interest of the business. * Ability to work well under pressure and respond to changing needs and complex environments. * Excellent communication skills (oral and written), presentation style, including the ability to concisely present data to leaders, clinicians, and staff at all levels of the organization Where You'll Work Founded in 1955, Dignity Health - Northridge Hospital Medical Center is a 394-bed, acute care, nonprofit community hospital located in Northridge, California. The hospital offers a full complement of award winning services, including the Leavey Cancer Center, a cardiovascular center, stroke center, the Center for Assault Treatment Services, a pediatric medical center, and the only pediatric trauma center in the San Fernando Valley. As a leading provider of compassionate, high-quality and affordable patient-centered care, we share a rich legacy with Dignity Health, one of the nation's five largest health care systems. We are part of a 21-state network of nearly 9,000 physicians, 62,000 employees and more than 400 care centers. Visit here dignityhealth.org/northridgehospital for more information. One Community. One Mission. One California

Shift: Monday - Friday; 8:00am - 5:00pm PT Hybrid 1: This role requires associates to be in-office 1 day per week, fostering collaboration and connectivity, while providing flexibility to support productivity and work-life balance. This approach combines structured office engagement with the autonomy of virtual work, promoting a dynamic and adaptable workplace. Internal candidates may be considered with a confirmed virtual exception on file. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law The Clinical Quality Program Manager is responsible for serving as a liaison with and overseeing the quality improvement activities/projects/programs for one or more states within a major line of business. How you will make an impact: * Leads state change to health plan level quality strategy meetings, develops a quality plan, and ensures integration of quality into the overall business process. * Works with the clinical intervention team to design studies to identify barriers to medical interventions. * Ensures that study methodology is sound and appropriate reporting is in place. * Develops performance improvement plans and oversees the clinical quality improvement activities/projects to improve the quality of care for members. * Assures compliance with corporate QI work plans. * Assures that all QI activities are relevant to the needs of targeted population. * Maintains effective documentation of research programs to meet regulatory and Accreditation Standards. * Provides oversight to assure accurate and complete quantitative analysis of clinical data and presentation of data analysis results. * Participates in and provides input to the development of new product designs for major line of business. * Oversees the implementation of new initiatives. * Leads interactions with regulators or oversight entities. * Oversees quality improvement activities for the largest, most complex state programs. Minimum Requirements: * Requires a BS in health administration, nursing, or a related clinical field; 4 years of health care quality or data analysis experience; or any combination of education and experience, which would provide an equivalent background. Preferred skills, capabilities, or experiences: * Current unrestricted license, certification in applicable field (i.e. CPHQ) and/or a MS in the health field (i.e. Nursing) is preferred. * Intermediate Excel and PowerPoint skills * Prior experience with HEDIS and NCQA Health Plan Accreditations For candidates working in person or virtually in the below location(s), the salary* range for this specific position is $95,680.00 to $149,760.00 Locations: California In addition to your salary, Elevance Health offers benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). The salary offered for this specific position is based on a number of legitimate, non-discriminatory factors set by the Company. The Company is fully committed to ensuring equal pay opportunities for equal work regardless of gender, race, or any other category protected by federal, state, and local pay equity laws. * The salary range is the range Elevance Health in good faith believes is the range of possible compensation for this role at the time of this posting. This range may be modified in the future and actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. Even within the range, the actual compensation will vary depending on the above factors as well as market/business considerations. No amount is considered to be wages or compensation until such amount is earned, vested, and determinable under the terms and conditions of the applicable policies and plans. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. Job Level: Non-Management Exempt Workshift: 1st Shift (United States of America) Job Family: QLT > Clinical Quality Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

Job DescriptionSalary: Day to day life has room for improvement. That was our basic thinking when we founded simplehuman in 2000. Our mission is to bring high-performance innovation to basic but essential tasks in our daily routine. Through new technologies, meticulous engineering and an obsession for improvement, we find new and better ways to achieve basic but important daily tasks. About the role simplehuman is seeking an experienced Product Quality Engineer to drive excellence from concept through production. This is a key role in our Quality team that owns product quality planning, testing, and supplier collaboration across our new product introduction (NPI) and continuous product improvement (CPI) programs. Ideal candidate operates with analytical rigor, owns multiple workstreams simultaneously, and drives alignment through clear, influential communication while maintaining a high standard of quality and accountability. This is a fully on-site position based in our Torrance, CA office. Responsibilities Own end-to-end Product Quality Planning (PQP) process, ensuring each new/existing product has clear inspection criteria. Define and implement control requirements across all stages of manufacturing including Incoming (IQC), In-Process (IPQC), Outgoing (OQC), and Quality Audit checkpoints. Ensure mass production quality through statistical analysis and process validation, defining control limits, dimensional tolerances, and key variables that maintain cosmetic and functional consistency across builds. Design and execute pre-production validation testing to verify hardware and software performance, while designing and refining test methods, fixtures, and measurement systems for consistent, repeatable results. Partner across internal engineering, design, and external teams to align quality expectations, resolve yield issues, and report actionable quality insights to support key decisions Own failure analysis and CAPA initiatives to resolve issues, prevent recurrence, and enhance product and process robustness. Lead weekly Quality Improvement efforts and drive continuous product and process improvements with OEM partners. Own quality-critical issue management, ensuring rapid containment & effective corrective implementation. International Travel is required (up to 20%) Qualifications Bachelors degree in Mechanical, Industrial , or related Engineering field; Masters degree or higher preferred 3+ years of industry experience in quality for one or more of the following areas: product development, plastic parts, injection molding, tooling, jigs, fixtures, or high-volume manufacturing engineering (Consumer Electronics, Automotive, Medical Devices, etc.) Proven experience with high-volume manufacturing and related quality processes Solid understanding of injection molding and sheet metal fabrication Proficiency in SolidWorks, Creo, or Catia, with strong knowledge of GD&T and mechanical drawings Familiarity with quality analysis tools (8D, PFMEA, Fishbone, etc.) and Acceptance Quality Limit (AQL) standards Exceptionally detail-oriented, highly organized, and proactive in driving results Excellent written and verbal communication skills About Us Were a mature company with the soul of a start-up. We value ingenuity, precise communications, fast iteration and scrappiness. Our teams are tight-knit with a work hard, play hard tradition we take pride in individual and team success and push boundaries to make the best products. And we only build products we love to use ourselves.Great benefits, competitive compensation, and generous simplehuman product discounts.

Company: The Boeing Company Boeing Global Services, Cabin, Modifications, Maintenance (CMM) is a One Boeing opportunity to engage across the business units and global design centers. BGS CMM - Systems Engineering is seeking a high performing Extended Operations Performance Standards (ETOPS) Engineer (Mid-Level, Lead or Senior) to join this talented and fast-paced team, reporting to the BGS CMM Avionics Manager in Long Beach, California. The engineer will join and inspire a group of employees performing engineering, technical, and regulatory tasks that provide engineering solutions for multiple Boeing Global Services commercial modifications business units as well as integrating with a Boeing Commercial Airplanes (BCA) ETOPS team. The position includes responsibility for developing and executing project and process plans, as well as implementing policies and procedures. This role includes a significant level of developing and mentoring systems engineers in ETOPS design, integration and certification. The primary focus for this role is ETOPS which ensures Boeing aircraft are designed, built, tested, and supported for extended operations (especially over water), enabling Boeing customers to fly long range missions in a more direct route to/from suitable airports. ETOPS is heavily regulated and has considerable certification aspects, including focus on safety, airplane maintenance and operational procedures. This work involves close coordination with Boeing engineers and certification specialists to ensure all activities required for ETOPS certification of Boeing commercial and military commercial derivative airplanes are accomplished. As an ETOPS Engineer, you will be supporting all airplane programs on new, amended, and/or supplemental type certification and major airplane modification programs. You will be expected to coordinate, plan, prepare, review and execute ETOPS applicant certification work for submittal to the certification authorities, including the FAA, EASA, and other international validation bodies. This position will give the candidate the opportunity to develop airplane level thinking and provide exposure to multiple disciplines/areas (such as propulsion, flight controls, avionics, safety, maintenance, regulatory administration) and many levels of program leadership throughout the Boeing Company. Position responsibilities: Perform airplane-level evaluations of changes impacting ETOPS on multiple platforms (737, 747-8, 757 , 767, 777, 787) including retrofit modifications. Perform system-level evaluations and provide assistance related to ETOPS-significant systems in propulsion, systems, avionics, etc. Using project management practices, provide inputs to ETOPS certification plans and manage deliverables to closure. Prepare Major / Minor Determinations for ETOPS DAEs. Develop analytical, reliability, and empirically based ETOPS assessment reports. Review safety assessments (including Fault Tree Analysis) that pertain to ETOPS missions/diversions Develop configuration and conformity requirements for ETOPS including negotiating as required with Program, Regulatory Agencies, Suppliers, and Manufacturing/Quality. Integrate with BCA ETOPS team to support airplane program meetings and project reviews. Support customers (ETOPS) and in-service reliability tracking (ETOPS). Familiar with FAA regulations for ETOPS (e.g., 14 CFR 25.1535 & Appendix K). Able to perform Applicant role and complete training for ETOPS discipline specific and BPM 15.4 DAE role for ETOPS. Understanding of Boeing Procedures Manual Sections 15.1 and 15.4. Familiar with ETOPS Configuration, Maintenance and Procedures (CMP) document(s) and CMP change proposals and also with the ETOPS requirements for the Airplane Flight Manual (AFM) and lead on AFM change proposals. Knowledge and experience with the BPSM Process (RCA, Corrective Actions, etc.) Other skills of this role: Development of specifications, architectural and configuration concepts for associated vehicle systems to meet customer and regulatory requirements. Configuration and design of ETOPS systems and components to meet all vehicle design and performance criteria. Use of various testing, analysis, modeling, and simulation tools to estimate or calculate ETOPS system performance and demonstration of compliance to the ETOPS regulations. Development of concepts for future ETOPS systems to meet anticipated requirements. Works under minimal direction. Future Skill Development and Statement of Work Be able to document Major/Minor Determinations in Boeing Design Change Classification System (DCCS) tool and BERST as a ETOPS DAE. Basic Qualifications (Required Skills / Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. 3+ years of experience in Aerospace and Systems Engineering. Preferred Qualification (Desired Skills / Experience): 5+ years of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) 10+ years of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Experience with Airplane Extended Operations (ETOPS) certification, design, integration and analysis in systems, propulsion, electrical, etc. Knowledge of aircraft design, systems engineering, model-based engineering, system integration, requirements management, propulsion engineering, and turbomachinery. Knowledge of EASA regulations for ETOPS. Understanding and application of Project Management techniques such as scheduling, resource management, and performance measures. Experience with Systems Troubleshooting. Willing & able to travel 10% of the time domestically and internationally. Identify and trade alternatives (i.e., trade studies), select/recommend the best plan for mitigating complex risks. Experience with risk identification and mitigation plans. Implement/execute plans for mitigating risk and establish appropriate performance tracking metrics to track risk burn down over time. Ability to troubleshoot hardware, software, and anomalies, with an understanding of how to accomplish activities in a restricted configuration-controlled system environment. Ability to help develop, mentor and coach less experienced staff. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Mid-Career (Level 3): $114,750- $155,250 Senior (Level 4): $138,550- $187,450 Principal (Level 5): $165,750- $224,250 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

Job Description Ruggable is a leading direct-to-consumer e-commerce brand based in Los Angeles, California with an extraordinary track record of high, profitable growth. We pride ourselves on having an extremely loyal customer base and a talented team made up of genuinely caring people who take action and deliver results. We are venture-backed and own a patented washable rug design that's disrupting the home décor industry. Our mission is to empower our customers to live vibrantly with beautiful products that don't compromise on function. If you're passionate about consumer products, e-commerce, and high-growth start-ups, keep reading! Please note, this role is onsite five days a week, Monday through Friday, 7-4 or 8-5 pm. Job Summary: We are seeking a Quality Technician to support our daily manufacturing operations. This role helps ensure every product meets our quality standards by supporting the systems that keep our output consistent for customers. The Quality Technician will work closely with on-site Quality, Production, and Engineering teams to identify issues, assist with corrective actions, and reduce variation in our processes. This position plays a key role in maintaining reliable, repeatable production and ensuring compliance with both customer and internal standards. What You'll Do: Perform routine quality checks, measurements, and visual inspections to ensure products create exceptional experiences for our customers Support on-site manufacturing quality process control activities and maintain accurate documentation Assist in maintaining quality records, equipment logs, and inspection documentation to support consistent production and compliance Work directly with local Production, QA, and Engineering teams to provide data and observations during root cause analysis (RCA/CAPA) efforts Monitor visual and dimensional product characteristics, especially color consistency, and promptly communicate discrepancies to supervisors Collect, organize, and report quality and process data for trend analysis and continuous improvement What You'll Need to Have: Required: Associate degree in a technical field or equivalent hands-on experience in quality 0-1 years of experience in a production, quality, or manufacturing support role Working knowledge of basic quality tools (control charts, check sheets, 5 Whys, basic FMEA concepts) Ability to perform accurate measurements, visual inspections, and data collection Proficiency with Google Sheets/Excel and basic data analysis techniques Strong attention to detail, communication, and teamwork skills Comfortable working in a fast-paced manufacturing environment Preferred: Experience with visually critical characteristics such as color consistency Exposure to quality audits, feedback loops, or process verification activities Familiarity with ISO standards or retail/consumer product compliance Experience in wholesale, retail, or direct-to-consumer manufacturing environments' Compensation: $69,000-80,000 annual salary range (depending on location and experience) An annual bonus percentage that varies based on level of role Employer matching (up to 3% of base salary) for company sponsored 401k plan At Ruggable, we offer competitive compensation and benefits packages. Ruggable is an Equal Employment Opportunity employer. We proudly recruit and hire a diverse workforce and are committed to creating an inclusive environment for all employees. If you are based in California, we encourage you to read this important information for California residents linked here. To all recruitment agencies: Ruggable does not accept unsolicited agency resumes. Please do not forward resumes to our jobs alias, Ruggable employees or any other company destination. Ruggable is not responsible for any fees related to unsolicited resumes.

Business Unit: F&E Drug Product Supply Employment Type: Contract . Rate: $38 - $42/hour W2 Posting Date: 10/14/2024. Notes: Only qualified candidates need apply. ONSITE THOUSAND OAKS, Local Candidates who can report to the site Monday - Friday. Flexible availability, schedule is 7am - 4pm need to be open to afterhours calls. 3 Key Consulting is hiring! We are recruiting an Engineer for a consulting engagement with our direct client, a leading global biotechnology company. Job Description: The qualities and characteristics we are looking for in candidates include: Fast learner Strong critical thinking skills Ability to handle stress well Technically inclined with skills in electro-mechanical systems. Candidates must show an engineering mindset, particularly those who use the scientific method to solve issues and provide examples of projects they have worked on. Regarding the minimum education and experience requirements, a BA in Engineering, whether it be Mechanical, Industrial, or Electrical Engineering, is suitable for this role. As for non-negotiables, candidates must have a degree in an engineering-related field and must be flexible with their working hours. Our ideal candidate: Highly motivated individual, system owner Mechanical and electrical engineering background. Pharmaceutical industry manufacturing maintenance engineering and not operations side. Direct knowledge of design and troubleshooting with GMP Biopharmaceutical Production facility equipment/systems such as continuous fill lines (washer, tunnel, isolator, cappers and lyophilization), filling, lyophilization, inspection, as well as other equipment needed to support these processes such as autoclaves, clean in place (CIP) systems, washers, clean steam, water for injection, etc. The Engineer will be joining Facilities & Engineering (F&E) group within Manufacturing and Clinical Supply organization of our client. The group's mission is to enable introduction, and integration of new technologies while ensuring existing clinical and commercial facilities and equipment operate reliably. This position will report to the Senior Manager of Engineering supporting drug product supply. Top Must Have Skill Sets: Ability to analyze problems, develop and propose engineering solutions in a scientific manner using data-driven techniques and analyses (e.g., Root Cause Analysis (RCA), Statistical Process Control (SPC), Six Sigma, Predictive Maintenance, etc.) Experience applying engineering principles to the design and implementation of system modifications, introduction of new processes, and execution of capital projects Day to Day Responsibilities: Provide system ownership for Biopharmaceutical process equipment. Identify, support, and/or lead implementation of engineering-based improvements or upgrades to the equipment or facility systems. This may include development of business case for improvement and identification of design requirements and then translation of requirements into process equipment/system design, specification and supporting the construction, startup, and validation of equipment. Directing and coordinating equipment maintenance as necessary to ensure systems are working at peak capacity. Ensure necessary commissioning and qualification of systems is completed and interact with inspectors as necessary. Monitor systems to identify performance risks and implement risk reduction strategies. Solving issues to support and reduce production downtime. This will involve leading and/or supporting technical root cause analysis and implementation of corrective/preventive action. Support new product/technology introductions by performing engineering assessments, implementing equipment modifications, and supporting engineering runs. Ensure regional medical activities align with practices, policies and standard operating procedures. Basic Qualifications: Master degree OR Bachelor degree and 2 years of experience OR Associate degree and 6 years of experience OR High school diploma / GED and 8 years of experience Preferred Qualifications: Bachelor's degree in Chemical or Mechanical Engineering. 4+ years of relevant work experience with 2+ years' experience in Biopharmaceutical operations/manufacturing environment Experience working in a regulated environment (e.g. cGMP, OSHA, EPA, etc.) and familiarity with GMP quality systems/processes such as change control, non-conformances, corrective and preventative actions, and qualifications/validation Direct knowledge of design and troubleshooting with GMP Biopharmaceutical Production facility equipment/systems such as continuous fill lines (washer, tunnel, isolator, cappers and lyophilization), filling, lyophilization, inspection, as well as other equipment needed to support these processes such as autoclaves, clean in place (CIP) systems, washers, clean steam, water for injection, etc. Ability to analyze problems, develop and propose engineering solutions in a scientific manner using data-driven techniques and analyses (e.g., Root Cause Analysis (RCA), Statistical Process Control (SPC), Six Sigma, Predictive Maintenance, etc.) Experience applying engineering principles to the design and implementation of system modifications, introduction of new processes, and execution of capital projects Red Flags: No engineering experience Interview Process: 1 phone screening 1 interview with hiring manager 1 panel interview with co-workers We invite qualified candidates to send your resume to **************************. If you decide that you're not interested in pursuing this particular position, please feel free to take a look at the other positions on our website ******************************* You are also welcome to share this opportunity with anyone you think might be interested in applying for this role. Regards, 3KC Talent Acquisition Team

This role is designed for Second Shift. The **Quality Technician II** supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. **Position Responsibilities** + Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks. + Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database. + Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers. + Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms. + Support DCMA Source Inspection process + Coordinates with Shipping and Contracts department as needed to ensure timely delivery. + Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection. + Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system. + Develops and maintains process instructions for quality-related activities + Works on assignments that are semi-routine in nature + Other duties as assigned **Basic Qualifications (Required Skills & Experience)** + High School Diploma or GED equivalent + 1 - 2 years of related work experience or equivalent combination of education, training, and experience + Demonstrated expertise in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. + Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 + Basic knowledge of FAI validation and verification process requirements + Strong computer skills and is proficient in MS Office Suite (Word, Access, PowerPoint, Excel) + Basic knowledge of engineering drawings and specification systems + Must be able to fill out the necessary flight test documentation + Must be able to properly document any/all non-conformances encountered + Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components. + Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results + Must able to work efficiently in a fast-paced, high-volume environment + Required to travel to and from remote flying sites on a daily basis + Must have a valid California driver's license and clean driving record + Willingness to work overtime also a must **Other Qualifications & Desired Competencies** + 2 year technical degree desired; Quality system courses and/or equivalent experience preferred + Aerospace quality management system experience (AS9100DD) and/or internal audit experience is preferred + Solid ability to accurately record and manage data, records, files and other documents to support tasks + Has an analytical approach to problem solving and high organizational skills as well as effective time management, interpersonal and communication skills + Strong ability to manage time and prioritize tasks + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Focuses on teamwork, collaboration and puts the success of the team above one's own interests **Physical Demands** + Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) + Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) + Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) **Clearance Level** Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship required **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

Ruggable is a leading direct-to-consumer e-commerce brand based in Los Angeles, California with an extraordinary track record of high, profitable growth. We pride ourselves on having an extremely loyal customer base and a talented team made up of genuinely caring people who take action and deliver results. We are venture-backed and own a patented washable rug design that's disrupting the home décor industry. Our mission is to empower our customers to live vibrantly with beautiful products that don't compromise on function. If you're passionate about consumer products, e-commerce, and high-growth start-ups, keep reading! Please note, this role is onsite five days a week, Monday through Friday, 7-4 or 8-5 pm. Job Summary: We are seeking a Quality Technician to support our daily manufacturing operations. This role helps ensure every product meets our quality standards by supporting the systems that keep our output consistent for customers. The Quality Technician will work closely with on-site Quality, Production, and Engineering teams to identify issues, assist with corrective actions, and reduce variation in our processes. This position plays a key role in maintaining reliable, repeatable production and ensuring compliance with both customer and internal standards. What You'll Do: * Perform routine quality checks, measurements, and visual inspections to ensure products create exceptional experiences for our customers * Support on-site manufacturing quality process control activities and maintain accurate documentation * Assist in maintaining quality records, equipment logs, and inspection documentation to support consistent production and compliance * Work directly with local Production, QA, and Engineering teams to provide data and observations during root cause analysis (RCA/CAPA) efforts * Monitor visual and dimensional product characteristics, especially color consistency, and promptly communicate discrepancies to supervisors * Collect, organize, and report quality and process data for trend analysis and continuous improvement What You'll Need to Have: Required: * Associate degree in a technical field or equivalent hands-on experience in quality * 0-1 years of experience in a production, quality, or manufacturing support role * Working knowledge of basic quality tools (control charts, check sheets, 5 Whys, basic FMEA concepts) * Ability to perform accurate measurements, visual inspections, and data collection * Proficiency with Google Sheets/Excel and basic data analysis techniques * Strong attention to detail, communication, and teamwork skills * Comfortable working in a fast-paced manufacturing environment Preferred: * Experience with visually critical characteristics such as color consistency * Exposure to quality audits, feedback loops, or process verification activities * Familiarity with ISO standards or retail/consumer product compliance * Experience in wholesale, retail, or direct-to-consumer manufacturing environments' Compensation: * $69,000-80,000 annual salary range (depending on location and experience) * An annual bonus percentage that varies based on level of role * Employer matching (up to 3% of base salary) for company sponsored 401k plan At Ruggable, we offer competitive compensation and benefits packages. Ruggable is an Equal Employment Opportunity employer. We proudly recruit and hire a diverse workforce and are committed to creating an inclusive environment for all employees. If you are based in California, we encourage you to read this important information for California residents linked here. To all recruitment agencies: Ruggable does not accept unsolicited agency resumes. Please do not forward resumes to our jobs alias, Ruggable employees or any other company destination. Ruggable is not responsible for any fees related to unsolicited resumes.