Quality engineer jobs in Smyrna, GA

JSG is searching for a PCle - CXL Validation Engineer for our client's Northeast Atlanta, GA area operation. This is a direct hire position with competitive salary, outstanding benefits and a great opportunity to join an industry leader. Develop and execute validation plans and test cases for PCIe and CXL system interfaces, ensuring compliance with industry standards. Validate PCIe and CXL functionality, compatibility, and performance Evaluate interface equalization techniques and transmission line characteristics to optimize signal integrity and data transfer rates Utilize Python and C++ for test automation and data analysis to streamline validation processes Collaborate with design and architecture teams to design and execute innovative tests that stress the PCIe and CXL interfaces to their limits Analyze validation results to identify and report issues, anomalies, and potential improvements in performance Collaborate with hardware and software teams to address and resolve validation and performance issues, ensuring product readiness for market release Qualifications 5+ years of relevant validation work experience Bachelor's or Master's degree in electrical engineering or computer engineering Strong experience in PCIe and CXL interface validation and debug Experience with signal integrity and equalization techniques Knowledge of PCIe/CXL training and protocol flows Proficiency in Python and C++ programming for test automation and data analysis Experience with firmware and BIOS development is a plus Solid understanding of server platform architecture and industry standards Strong problem-solving skills and attention to detail Excellent communication and teamwork skills Experience in testing and validation methodologies Experience mentoring junior engineers Interested Candidates Should Apply Now! *** Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D200

DP World in Fairburn, GA is searching for a sharp, driven, and quality-obsessed Quality Manager ready to take ownership of our standards and elevate them to the next level. In this role, you'll be the champion of quality performance, leading key initiatives that ensure our operations run flawlessly. You'll design, implement, and refine quality procedures, analyze performance trends, and work side-by-side with leadership to drive continuous improvement across the site. This isn't a behind-the-scenes role - this is your chance to influence major decisions, strengthen customer satisfaction, and build a best-in-class quality culture that sets the tone for the entire facility. If you're passionate about operational excellence, thrive in fast-paced environments, and are ready to create real impact - we want to see what you can bring to the table. About the Role How you will contribute * Manage and analyze data from customers and internal sources as input for problem solving and communicate/report to appropriate personnel. Interacts with staff within the location and within the Company and all customer and prospective customer representatives. * Directly supervises Quality functions and staff across all shifts and provides consistent direction of the company's quality plans. * Administer all projects and documentation relative to assigned processes (i.e. operator instructions, PFMEA's and process control plans). * Develop and design irreversible corrective actions for known problems. Use established problem solving techniques to reduce process variation. * Manage quality processes and reports - 3rd party sorts, suspect material, damage material etc. - Suspect Material - maintain relationships with suppliers to deal with suspect material. * Champion Lean engineering goals. Includes being an aid in developing, implementing and maintaining a Lean culture within the organization using a hands-on approach in order to provide input on processes from a quality perspective. * Responsible for the development, implementation and monitoring of the Quality System. Reports to Management on effectiveness of the Quality System. * Generate, interpret, analyze, and communicate results using management tools, graphs, and reports; actively coach the organization concerning quality with tools and reports. * Provide input on document enhancement and retention; Maintain ISO documentation and controls, administer activities required to maintain ISO certification, and actively coach the organization for maintaining ISO system. * Other duties as assigned Your Key Qualifications * Bachelor's degree in business, engineering, or related field preferred. * Progressive experience performing professional level quality management duties; preferably in automotive or logistics industry. * Additional education, training and/or work experience in area of specialization inherent to the position may be required. * Knowledge of principles and procedures used in logistics operations and practice. Compensation DP World offers exciting and challenging roles within a growing international organization. We strive to hire and develop the right people, locally and globally, stimulating personal growth and self-development within an informal atmosphere. We offer a market competitive compensation package. About DP World Trade is the lifeblood of the global economy, creating opportunities and improving the quality of life for people around the world. DP World exists to make the world's trade flow better, changing what's possible for the customers and communities we serve globally. With a dedicated, diverse and professional team of more than 111,000 employees from 159 nationalities, spanning 77 countries on six continents, DP World is pushing trade further and faster towards a seamless supply chain that's fit for the future. We're rapidly transforming and integrating our businesses -- Ports and Terminals, Marine Services, Logistics and Technology - and uniting our global infrastructure with local expertise to create stronger, more efficient end-to-end supply chain solutions that can change the way the world trades. What's more, we're reshaping the future by investing in innovation. From intelligent delivery systems to automated warehouse stacking, we're at the cutting edge of disruptive technology, pushing the sector towards better ways to trade, minimising disruptions from the factory floor to the customer's door. DP World is on a mission to transcend boundaries and bridge the gap between all nations and cultures - not just in what we do but also in how we behave. We are dedicated to creating a culture where everyone feels respected, supported, and empowered to reach their full potential. We believe that embracing inclusion and diversity, drives innovation and growth and helps us connect people, businesses, and societies. Free minds and different perspectives are changing our world, and together we can change what's possible. The DP World family comprises of syncreon, Imperial and P&O. WE MAKE TRADE FLOW TO CHANGE WHAT'S POSSIBLE FOR EVERYONE. Nearest Major Market: Atlanta Job Segment: Logistics, Supply Chain Manager, Supply Chain, Quality Manager, Facilities, Operations, Quality

Be Part of an Extraordinary Team A proud member of the Elevance Health family of companies, Paragon Healthcare brings over 20 years in providing life-saving and life-giving infusible and injectable drug therapies through our specialty pharmacies, our infusion centers, and the home setting. Title: Quality of Life Program Manager- Paragon Ideal candidates will be comfortable traveling 60-70% of the time to local Hemophilia chapters across the U.S. The ability to attend Programs scheduled on nights and weekends will be required. Field: This field-based role enables associates to primarily operate in the field, traveling to client sites or designated locations as their role requires, with occasional office attendance for meetings or training. This approach ensures flexibility, responsiveness to client needs, and direct, hands-on engagement. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law. Build the Possibilities. Make an Extraordinary Impact. The Quality of Life Program Manager- Paragon is responsible for developing and implementing innovative ""Quality of Life"" (QOL) programs for individuals with bleeding disorders to drive health outcomes and improve therapy adherence. How you will make an impact: Primary duties may include, but are not limited to: * Collaborate with territory representatives to leading the increased business generation and customer retention. * Develops and maintain business relationships with local chapters, clinics, and healthcare providers to enhance the business unit presence and impact in respective territories. * Utilize lifestyle tools and resources within the QOL program to empower patients in managing their health, thus fostering a sense of control over their condition. * Strategically integrate QOL initiatives into sales efforts to shorten the sales cycle and promote seamless health management solutions for patients. * Leverage the QOL program as a significant referral source, contributing to business growth while maintaining cost-effectiveness compared to traditional event sponsorships. * Monitor and evaluate the effectiveness of QOL programs regularly, making data-driven adjustments to ensure optimal patient engagement and satisfaction. * Collaborate with cross-functional teams to align QOL initiatives with overall company objectives and marketing strategies. Minimum Requirements: * Requires a BA/BS degree and a minimum of 10 years of related experience in Specialty Pharmacy; and experience in marketing software (Aperture and Photoshop); or any combination of education and experience which would provide an equivalent background. * Joint Health, Health and Nutrition and CPR certification are required. Preferred Skills, Capabilities and Experiences: * Prior experience as a professional Public Speaker is strongly preferred. For candidates working in person or virtually in the below location(s), the salary* range for this specific position is $71,544 to $112,194 Locations: Colorado, Washington State In addition to your salary, Elevance Health offers benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). The salary offered for this specific position is based on a number of legitimate, non-discriminatory factors set by the Company. The Company is fully committed to ensuring equal pay opportunities for equal work regardless of gender, race, or any other category protected by federal, state, and local pay equity laws. * The salary range is the range Elevance Health in good faith believes is the range of possible compensation for this role at the time of this posting. This range may be modified in the future and actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. Even within the range, the actual compensation will vary depending on the above factors as well as market/business considerations. No amount is considered to be wages or compensation until such amount is earned, vested, and determinable under the terms and conditions of the applicable policies and plans. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

Be Part of an Extraordinary Team A proud member of the Elevance Health family of companies, Paragon Healthcare brings over 20 years in providing life-saving and life-giving infusible and injectable drug therapies through our specialty pharmacies, our infusion centers, and the home setting. Title: Quality of Life Program Manager- Paragon Ideal candidates will be comfortable traveling 60-70% of the time to local Hemophilia chapters across the U.S. The ability to attend Programs scheduled on nights and weekends will be required. Field: This field-based role enables associates to primarily operate in the field, traveling to client sites or designated locations as their role requires, with occasional office attendance for meetings or training. This approach ensures flexibility, responsiveness to client needs, and direct, hands-on engagement. Please note that per our policy on hybrid/virtual work, candidates not within a reasonable commuting distance from the posting location(s) will not be considered for employment, unless an accommodation is granted as required by law. Build the Possibilities. Make an Extraordinary Impact. The Quality of Life Program Manager- Paragon is responsible for developing and implementing innovative ""Quality of Life"" (QOL) programs for individuals with bleeding disorders to drive health outcomes and improve therapy adherence. How you will make an impact: Primary duties may include, but are not limited to: * Collaborate with territory representatives to leading the increased business generation and customer retention. * Develops and maintain business relationships with local chapters, clinics, and healthcare providers to enhance the business unit presence and impact in respective territories. * Utilize lifestyle tools and resources within the QOL program to empower patients in managing their health, thus fostering a sense of control over their condition. * Strategically integrate QOL initiatives into sales efforts to shorten the sales cycle and promote seamless health management solutions for patients. * Leverage the QOL program as a significant referral source, contributing to business growth while maintaining cost-effectiveness compared to traditional event sponsorships. * Monitor and evaluate the effectiveness of QOL programs regularly, making data-driven adjustments to ensure optimal patient engagement and satisfaction. * Collaborate with cross-functional teams to align QOL initiatives with overall company objectives and marketing strategies. * Travels to worksite and other locations as necessary. Minimum Requirements: * Requires a BA/BS and a minimum of 5 years of healthcare; or any combination of education and experience which would provide an equivalent background. Preferred Skills, Capabilities and Experiences: * Prior experience as a professional Public Speaker is strongly preferred. For candidates working in person or virtually in the below location(s), the salary* range for this specific position is $71,544 to $112,194 Locations: Colorado, Washington State In addition to your salary, Elevance Health offers benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). The salary offered for this specific position is based on a number of legitimate, non-discriminatory factors set by the Company. The Company is fully committed to ensuring equal pay opportunities for equal work regardless of gender, race, or any other category protected by federal, state, and local pay equity laws. * The salary range is the range Elevance Health in good faith believes is the range of possible compensation for this role at the time of this posting. This range may be modified in the future and actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. Even within the range, the actual compensation will vary depending on the above factors as well as market/business considerations. No amount is considered to be wages or compensation until such amount is earned, vested, and determinable under the terms and conditions of the applicable policies and plans. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law Job Level: Non-Management Exempt Workshift: Job Family: SLS > Sales Operations Please be advised that Elevance Health only accepts resumes for compensation from agencies that have a signed agreement with Elevance Health. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Elevance Health. Who We Are Elevance Health is a health company dedicated to improving lives and communities - and making healthcare simpler. We are a Fortune 25 company with a longstanding history in the healthcare industry, looking for leaders at all levels of the organization who are passionate about making an impact on our members and the communities we serve. How We Work At Elevance Health, we are creating a culture that is designed to advance our strategy but will also lead to personal and professional growth for our associates. Our values and behaviors are the root of our culture. They are how we achieve our strategy, power our business outcomes and drive our shared success - for our consumers, our associates, our communities and our business. We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, and incentive bonus programs (unless covered by a collective bargaining agreement), medical, dental, vision, short and long term disability benefits, 401(k) +match, stock purchase plan, life insurance, wellness programs and financial education resources, to name a few. Elevance Health operates in a Hybrid Workforce Strategy. Unless specified as primarily virtual by the hiring manager, associates are required to work at an Elevance Health location at least once per week, and potentially several times per week. Specific requirements and expectations for time onsite will be discussed as part of the hiring process. The health of our associates and communities is a top priority for Elevance Health. We require all new candidates in certain patient/member-facing roles to become vaccinated against COVID-19 and Influenza. If you are not vaccinated, your offer will be rescinded unless you provide an acceptable explanation. Elevance Health will also follow all relevant federal, state and local laws. Elevance Health is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, citizenship status, color, creed, disability, ethnicity, genetic information, gender (including gender identity and gender expression), marital status, national origin, race, religion, sex, sexual orientation, veteran status or any other status or condition protected by applicable federal, state, or local laws. Applicants who require accommodation to participate in the job application process may contact ******************************************** for assistance. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all federal, state, and local laws, including, but not limited to, the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Job Description About the Electric Power Division Caterpillar's Electric Power Division (EPD) offers integrated solutions, parts, and services to meet the needs of our various commercial and industrial electric power customers. EPD supports a wide range of customer applications across the globe, including providing back-up power to hospitals, providing emergency power when natural disasters strike, and supporting critical infrastructure for data centers, municipalities, and more. With a rich history of more than 95 years in the electric power business, our team has world-class expertise and a proven ability to adapt to changing demands. We're committed to providing sustainable and reliable solutions to our customers. Join our team to help build a better, more sustainable world for future generations! Role Definition Seeking a detail-oriented and proactive Quality Technician to support ongoing switchgear assembly operations and new project launch. This role is critical to ensuring product quality, process compliance, and successful new project ramp-up. What You Will Do * Perform in-process and final inspections of custom switchgear and standard control assemblies to ensure compliance with specifications and standards. * Support quality activities related to the launch of new projects, including first of kind inspections, process validations, and documentation reviews. * Maintain accurate records of inspections, non-conformances, and corrective actions by cataloging into a computer system. * Support internal standard work audits and ISO9001 compliance efforts. * Support process partners with wiring and training as needed. What You Will Have * Experience in a manufacturing setting, preferably in electrical or mechanical assembly. * Ability to read and interpret engineering drawings, schematics, and work instructions. * Strong attention to detail and organizational skills. * Excellent communication and teamwork abilities. * Ability to follow standard work. * Basic computer skills. What Will Put You Ahead * Experience with switchgear or electrical equipment assembly. * Exposure to new product introduction (NPI) or project launch environments. * Proficiency in using measurement tools (calipers, multimeters, etc.). Physical Requirements (with or without reasonable accommodation) * Ability to sit or stand for prolonged periods. * Ability to perform repetitive operations. * Ability to lift to 35 lbs. Shift * Monday - Thursday with opportunity to work overtime as needed on Fridays. Additional Requirements: * Relocation assistance is not offered for this position. * Visa Sponsorship is not offered for this position. * Resume's are highly encouraged for all applicants. #LI Summary Pay Range: $20.05 - $26.05 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: November 13, 2025 - December 4, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

The first 3 letters in workplace safety are Y-O-U! TK Elevator is currently seeking an experienced Sr. Quality Program Manager in Atlanta/Germantown). responsible for implementing and maintaining a systemic quality focus using the collection and analysis of defect data. This is to be achieved by implementing and maintaining common data collection tools and partnering with geographically distributed business functions. ESSENTIAL JOB FUNCTIONS: * Provide accurate data to the business on product performance. * Identify trends in reported data that may indicate areas for improvement. * Prepare and present data as requested to leadership to drive effective actions. * Escalate urgent reported issues as appropriate in a timely fashion. * Identify effective correction and containment. * Leading root cause investigations to address key business objectives. * Drive timely execution of identified corrective and preventive actions. * Develop strong relationships with organizational functions to ensure working understanding of the roles and responsibilities of each function. * Using data engage senior leadership in the operationalization and utilization of data to meet organization objectives. * Coach and support personnel in the use of continuous improvement tools and methodologies * Drive a sense of urgency for results utilizing operational project review and meaningful metrics.

Job Description Description of Tasks: Perform wet chemical analyses Prepare and standardize lab stock reagents as needed Order, receive, stock and maintain inventory of chemicals, reagents and consumable supplies. Interpret MSDS information with respect to lab chemicals and finished products Identify tests to perform based on product testing matrices Record data in computer and/or logbooks and compose SPC charts for data analysis. Use of SAP to retrieve product specifications and test limits Maintain and troubleshoot laboratory equipment to include scales, pH meters, viscometers, and auto titrator. Maintain housekeeping in the department as required Support project work as necessary Demonstrate the proper use of lab-ware including volumetric and non-volumetric. Including menisci reading for graduated cylinder/burette/volumetric flasks Conduct Finish Case Inspections and other Quality checks on Packaging Lines Prepare and maintain Target/Reject bottles Support WCM processes including Early Management, Daily Operations and other Pillars. Required Skills: Ability to prepare a standard calibration curve using internal and external standards for quantitative analyses, with emphasis on calibration curve theory Recognize data trends in results using Statistical Process Control and determine appropriate course of action Ability to operate, troubleshoot and maintain analytical instrumentation such as, but not limited to colorimeter, viscometer and auto titrator. Follow and interpret test methods accurately to ensure consistency and reproducibility of results Maintain laboratory through workplace organization (WPO) Manage workload and prioritize daily responsibilities Possess good troubleshooting skills Perform tests with a high degree of accuracy to support tight production specifications Ability to write, revise and update SOPs and other documentation Knowledge and understanding of analytical techniques, including quantitative and qualitative chemical analyses Demonstrate safe laboratory practices with respect to PPE and chemical handling Intermediate computer skills with experience in Microsoft applications Be willing to work overtime as needed. Workdays and schedule may include 12 hour shifts and change periodically according to business needs Strong commitment to the Plant non-negotiables (Safety, Quality, Environmental and Housekeeping) Demonstrate effective interpersonal skills in order to respond appropriately to supervisors and co-workers Self-motivated work behavior requiring limited to no supervision Be below the written step in attendance and/or work performance

Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you'll share in our pride and purpose that affects the lives of millions around the world! The Product Quality Engineer for the Airfoil Castings manufacturing process will drive product qualifications and quality improvements for key performance indicators (KPIs) of suppliers within the Airfoil Castings supply chain including quality plan implementation. The PQE, will own supplier First Article Inspection results and drive supplier compliance to Source Substantiation Plans or design intent verification. Provide supplier product release direction when part approval cycles are not complete while also being the internal quality focal for those parts. Collaborate with Supplier Quality, Supplier Quality Operations and New Product Introduction / Management of Change teams as required- this collaboration may include onsite visitation. In this role, you will also understand how the team integrates with other teams outside of Quality to meet short term and long term the business objectives. Demonstrate an in-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area. **Job Description** **Roles and Responsibilities** + Role is responsible for supplier processes, from initial qualification, maintenance, and necessary improvement driven by business quality needs. + Product Quality Engineer will have a technical understanding of engineering drawings and will have the ability to manage suppliers and/or quality projects related projects. + Develop in-depth knowledge of a discipline. Use prior experience and acquired expertise to execute functional policy/strategy. + Communication with direct colleagues and the business on the status of First Article Inspection and Source Substantiation Plans. + Provide onsite support at suppliers, as needed ( **approximately 15% travel** ) + Collaboration with other Engineering, Quality, and Sourcing functions to ensure joint success + Impacts projects, processes, and procedures in own field. The role operates with some autonomy but is focused on execution of activities/provision of advice within an enabling discipline covered by standard functional practices and procedures. Activities require professional judgment but may require more senior levels of guidance. + Utilizes technical expertise and judgement to solve problems. Leverages technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. + Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology, or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Able to offer new solutions to problems outside of set parameters and can construct and provide recommendations. Uses multiple internal and some external sources outside of own function to help arrive at a decision. + May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. Communicates difficult concepts and may influence others' options on specific topics. May guide others to consider a different point of view. **Required Qualifications** + Bachelor's Degree from an accredited college or university (or a high school diploma/GED with 4 years' experience in Engineering, Materials Science or Quality related roles) + Minimum of 3 years of experience in Engineering, Materials Science or Quality related roles **Desired Characteristics** + Demonstrated experience in manufacturing or supplier quality. + Strong communication skills. + Demonstrated ability to analyze and resolve problems. + Ability to document, plan, market, and execute programs. + Established project management skills. + Demonstrated history of problem solving, root cause and corrective action methodology, data analysis, statistical analysis and quality experience. + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative + Problem solver: analytical-minded, challenges existing processes, critical thinker + Demonstrated Airfoil Casting manufacturing knowledge and experience is advantageous to the role. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. The base pay range for this position is 100,000.00 - 115,000.00. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on **November 30th, 2025.** _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Kemira is a global leader in sustainable chemistry for water intensive industries. For more than 100 years, our chemistry has advanced human progress and quality of life. We call it chemistry with a purpose, better every day. At Kemira, we foster a collaborative and inclusive work culture that empowers our employees to thrive and make a difference. Learn more about Kemira at *********************** Kemira is looking for an experienced Process Engineer in our Marietta, Georgia, production facility. We are looking for someone to work in the plant on process and project engineering activities. This will include process improvements and modifications, new project development and implementation, preparing capital projects, and troubleshooting existing process problems. This person will also assist with process safety and management of change for the site. This position reports to the Plant Manager. In this role you will be responsible for: * Improving chemical production and utility processes. * Collaborating with production staff to improve safety, quality, and efficiency. * Coordinating process safety activities, including: * Management of Change * Process hazard analysis * Pre-start up reviews * Root Cause Analysis and corrective actions for process incidents. * Managing plant-wide improvement idea system. * Training personnel on new / changed processes. * Regulatory reporting and environmental protection activities. * Providing technical and process safety support for new / experimental product trials. * Developing and updating operating procedures, P&IDs, engineering records. * Supporting or leading capital projects. * Identifying and leading efforts to reduce emissions, energy and water consumption. * Developing competency to fill in for team members as needs arise. What you will bring to the team : * Chemical engineering degree * 4+ years of experience with chemical manufacturing, involving batch reactions and PSM processes. * Excellent written and oral communication skills (English). * Demonstrated track record of self-motivation and skills growth. * Demonstrated ability to manage multiple tasks/ projects simultaneously within tight timeframes. * Strong interactive skills with all levels of plant organization. * Willingness to travel when required. * Demonstrated Process Engineering and project support skillset including most of following: Process troubleshooting Material & energy balances Equipment sizing & specification PFD development Equipment startup & commissioning Automation & controls knowledge Project scope development Design safety reviews Contractor management Equipment ordering Process Hazard Analysis leadership What we offer: * Excellent opportunity to develop your career and learn new skills. * Work at a key manufacturing site for a company committed to innovation, care for people and customer success. * Professional, collaborative colleagues and modern tools, enabling you to perform at your best. * Attractive compensation and benefit package, including bonus program. Please apply with resume and cover letter no later than December 30, 2025 at ******************************* Kemira is a global leader in sustainable chemical solutions for water-intensive industries. We deliver tailored products and services to improve the product quality, processes, and resource efficiency of our diverse range of customers. Our focus is on water treatment, as well as on fiber and renewable solutions - enabling sustainability transformation for our customers. In 2024, Kemira reported annual revenue of EUR 2.9 billion with a global team of some 4,700 colleagues. Kemira is listed on the Nasdaq Helsinki. **************

Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Quality Technician is primarily responsible for managing and driving root cause and corrective actions within the manufacturing & business environment. This role ensures that product and process nonconformities are properly investigated, documented, and resolved in compliance with company procedures. The Quality Technician partners with cross-functional teams to identify root causes, implement effective solutions, and monitor results to prevent recurrence. This role is ideal for someone who thrives on problem-solving, compliance, and driving accountability across teams. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate of $15.85/hour If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Coordinate and oversee corrective and preventive action activities across manufacturing operations. Track, document, and maintain corrective action records in accordance with company requirements. Ensure timely closure of corrective action tasks and verify effectiveness of solutions. Lead investigations into product or process non-conformances. Facilitate problem-solving sessions using tools such as 5 Whys, Fishbone Diagrams, and FMEA. Collaborate with engineering, production, and quality teams to identify systemic issues. Create or revise work instructions or procedures to support improvement actions. Technical writing ability and knowledge of document & configuration control. Prepare reports and summaries of corrective action status. Support internal and external audits by providing corrective action documentation and objective evidence. Recommend process improvements to reduce defects, scrap, and rework. Provide training and guidance to employees on corrective action and best practices. Monitor trends in non-conformances and proactively address recurring issues. Perform quality system and process audits. Perform product inspections and nonconformance dispositions. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Quality Technician must have proven root cause problem-solving experience, attention to detail & documentation accuracy; cross-functional collaboration & analytical thinking with a continuous improvement mindset. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions RESPONSIBILITIES OF THIS POSITION: 3-5 years of experience in manufacturing quality assurance or corrective action coordination. Strong knowledge of CAPA processes, ISO 9001, Lean, and Six Sigma methodologies. Excellent organizational, communication, and facilitation skills. Proficiency in quality tools and software for managing & tracking corrective actions & tasks. Ability to assess adequacy of objective evidence to approve and close corrective actions. Strong knowledge of ISO 9001, Lean Manufacturing, and Six Sigma principles. Excellent leadership, communication, and problem-solving skills. Proficiency in quality tools (SPC, FMEA, control plans, etc.) Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

Carlisle Weatherproofing Technologies (CWT) is a leading supplier of building envelope solutions that effectively drive energy efficiency and sustainability in commercial and residential applications. We are looking for a Quality Technician working out of our Cartersville Facility located in Cartersville, GA. Job Summary Ability to perform various quality control tests on products to verify that all products meet or exceed minimum requirements. Ability to perform inspection on manufacturing lines to ensure quality products are produced and shipped out to the customer. Standard work week 40 hours a week with occasional overtime, no travel required. Duties and Responsibilities: * Inspect materials, products, or equipment to detect defects or malfunctions. * Perform quality assurance tests and visual inspections of raw materials, intermediary products, and finished goods per work instructions. * Use dimensional measuring devices to ensure product meets job order specifications, or equipment to detect defects or malfunctions. * Enter all test results into the Formulator database and manage documents. * Communicate quality issues with affected departs. * Enforce safety and sanitation regulations. * Participate in audits on a regular or as needed basis. * Determine root causes regarding quality issues, identify and implement appropriate corrective actions. * Assist external and internal quality audits. * Assist production teams with process changes, quality plan documentation, and test requirement updates. * Assist customer service and sales teams to respond to customer questions in relation to product capability and limitations. * Help to drive continuous quality improvement and scrap reduction. * Other duties as assigned. Required Knowledge/Skills/Abilities: * Must demonstrate safe working practices and possess great attention to detail. * Ability to follow CWT's policies, procedures, and processes. * Good communication, organization, and time management skills. * Basic computer, mathematics, and problem-solving skills; ability to use a calculator. * Ability to use measuring devices (gauges, tapes, rulers, calipers). * Team player able to follow instructions from both management and peers. * Ability to learn and operate new equipment. * Ability and willingness to learn how and why. * Ability to work independently Education and Experience: * Required: * High School diploma or GED required. * Six (6) months to one (1) year related experience preferred. Working Conditions: * This position conducts its work in a manufacturing environment with exposure to some odors. * Use of the following equipment in the course of the job duties: * Viscometers * Thermometers * Power Tools * Scales * Tape Measure * Titrators * Forklift * Radio * Computer * Mixers * Square/Calipers * Spray Machine * Bandsaw * Respirator with spray suit Physical Requirements: OCCASIONALLY FREQUENTLY CONTINUOUSLY (0-30%) (31-60%) (61-100%) LIFTING OR CARRYING * 1-10 LBS X * 11-20 LBS X * 21-40 LBS X * 41-50 LBS X * 51 OR MORE LBS PUSHING OR PULLING: * 1-40 LBS X * 41-50 LBS X * 51 OR MORE LBS X BENDING OR STOOPING X REACHING ABOVE SHOULDER LEVEL X DRIVING AUTOMATIC EQUIP. VEHICLES X OPERATE MACHINERY OR POWER TOOLS X CLIMBING (LADDERS, STAIRS, ETC.) X WALKING X STANDING X SITTING X WORKING IN EXTREME TEMPERATURES X REPETATIVE MOTION INCLUDING BUT NOT LIMITED TO: WRISTS, HANDS AND/OR FINGERS) X VISION X HEARING X DEXTERITY X HAND EYE COORDINATION X Personal Protective Equipment (PPE) Used: * Eye and hearing protection is required at all times on the production floor. * Safety toe shoes (steel/composite) * Hi-Vis Vests or Uniforms * Spray suit * Gloves * Other PPE as defined by management within assigned department.

Monitors production processes of the facility to ensure all products meet company quality and food safety requirements during plant operations to ensure compliance with all company, regulatory and USDA standards. Role qualifications: Employee will need to be able to: Lift and stack up to 40 - 80 pounds Work at a fast pace for up to 3 hours at a time Work in a warm, dusty environment for extended periods. Work in a cold, moist environment for extended periods. Push and/or pull heavy objects Tolerate the sight of continuous moving objects Walk up and down multiple flights of stairs multiple times daily. Work in all weather conditions Be around chemicals for extended periods Adheres to all safety requirements including PPE (Personal Protective Equipment), preventing, and reporting unsafe acts and conditions, Lockout-Tagout procedures and Process Safety Management related matters. Maintains clean and safe working environment. Ensures product meets internal and customer specifications and takes appropriate actions when a non-compliance is noted. Accurately conducts product reviews for compliance to include grading, packaging, temperature control and weights. Performs and accurately records quality checks on product and regulatory checks as specified within company programs and USDA regulations. Monitors associates' work practices and addresses any deficiencies noticed immediately while continually evaluating potential for foreign material contamination while in assigned work areas. Inspects equipment for cleanliness and proper working condition prior to start up and records findings. Monitor production employees to ensure GMP compliance and reports violations Other responsibilities as assigned by Supervisor Essential Skills and Experience: Be dependable and honest. Time management: the ability to organize and manage multiple priorities Strong team player Commitment to company values Be able to work overtime when needed. Attention to detail a must Wear employer-specified protective gear, including gloves, face/eye shields, aprons, boots, etc. (some of which to be supplied by employer). Exposure to chemical solution (with protective gear) Perform varying tasks while standing, lifting, crouching, etc. during long periods of time. Perform all tasks safely and in a manner that will not create or pose a direct threat to the health and/or safety of the sanitation worker or any other person. Physical Demands and work environment: The physical and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands and work environment: Exposure primarily consists of wet and moist floors which include metal grating surfaces. May be exposed to temperatures of 28 degrees to 100 degrees Fahrenheit. May handle product 25 degrees to 50 degrees Fahrenheit. May be exposed to noise ranges of 50 db to 110 db. May be exposed to dust, feathers and all chemicals used in poultry, food, processing facility. Must wear and use protective and safety equipment required for the job as directed by the Company. Occasional exposure to carbon dioxide vapors 10ppm and chlorine less than 20 ppm. Able to stand for several hours. Work may include lifting (up to 80 lbs.), reaching, bending, pushing, extending.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of “U.S. Person” go here. ********************************************************************************************** Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Collins Aerospace is seeking a detail-oriented and proactive Quality Technician to join our team in support of the G400 Flight Test program. Based at our customer facility in Savannah, GA, this onsite, mid-shift role plays a critical part in upholding the highest standards of quality and compliance across our products and processes. The ideal candidate brings a strong commitment to precision, collaboration, and continuous improvement within a fast-paced aerospace environment. This position is working onsite at Gulfstream facilities in Savannah, GA. This position is a mid-shift role (Monday - Friday , 10 am - 6:30 pm) Relocation assistance will be provided. What You Will Do Conduct in-process and final inspections of products and materials Perform post-flight inspections, and report results directly to the customer Document inspection results and maintain detailed records Identify, report, and assist in the resolution of quality issues Interpret technical drawings, specifications, and standards Use measurement tools and equipment accurately Work closely with production and engineering teams to ensure quality requirements are met Apply fundamental math skills, including addition, subtraction, multiplication, division, fractions, and percentages, to perform accurate measurements and calculations. Support materials handling, including chemicals and parts receiving and inspection An essential function is to see and read information on multiple monitors and type on a color-coded keyboard for eight or more hours of the day. You will be required to pass a vision assessment. Occasional work overtime/ weekend shift work as needed Utilize strong written and verbal communication skills on a day-to-day basis. Bring high energy, enthusiasm, and a positive attitude to your work, demonstrating strong self-motivation, initiative, and a focus on driving results. Promote a culture of continuous improvement and attention to detail This role requires performing detailed visual inspections for extended periods, including identifying defects and interpreting color-coded indicators. You will be required to pass a vision assessment to ensure you meet the necessary visual acuity and color vision standards for this work. Safely perform other duties as assigned Qualifications You Must Have Typically requires an AA/AS degree (or other 2-year post high school training) with a minimum of 6 years of relevant experience. 3+ years in an Aerospace or similar inspection role using inspection tools/techniques and measuring equipment (e.g., calipers, micrometers, gauges) 3 years of experience in reading blueprints (2D and 3D) and interpreting specifications Experience in navigating and operating CATIA, Word, Excel, PowerPoint, and ERP programs Qualifications We Prefer SAP Experience Experience in AS9100 and AS9145 Experience in Aerospace / Automotive Industries What We Offer Some of our competitive benefits package includes: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Learn More & Apply Now! Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! WE ARE REDEFINING AEROSPACE. *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 50,000 USD - 100,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Chase Staffing is currently hiring a Quality Technician in the White, GA area. The Quality Technician is responsible for all incoming inspections, mainly for solar cells, in accordance with the high industry standards and within manufacturing timescales. Swing Shift: 6:00am - 6:30pm OR 6:00pm - 6:30am Schedule: two days on, two days off Pay rate: $23.00 - $24.00 per hour Responsibilities Inspect raw materials and solar cells to ensure consistency and integrity. Communicate with the Korean Plant regarding solar cell quality issue. Maintain, test, and troubleshoot all instrumentation devices. Test a certain percentage of all products based on industry standards. Report all issues and concerns to senior manager in a timely manner w/o an omission. Accurately record data and production information. Required Qualifications High School Diploma. Must have experience with working with calipers and reading blueprints. 1+ years of experience in quality related fields Proficiency in Korean, both spoken and written. Ability to communicate at all levels both verbally and written. Basic PC skills. Flexibility to adapt to different tasks. Awareness of Health and Safety. Eye for detail and quality. Must be able to communicate effectively within the team. Able to tolerate a fast-paced work environment in areas that are not climate controlled. Assertive, able to cope with pressure, self-motivated and driven team player. Proactive approach toward various issues. For consideration: 1) Apply online www.chasestaffing.com with the Cartersville branch 2) Call 678-655-6533 to schedule an interview after you complete the online application. CHASE provides Equal Employment Opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, status as disabled veteran, marital status or any other legally- protected characteristic in accordance with applicable laws. In addition, CHASE complies with applicable state and local laws governing nondiscrimination in employment in every location. CHASE is committed to complying fully with the Americans with Disabilities Act (ADA) and ensuring equal opportunity in employment for qualified persons with disabilities.

Monitors production processes of the facility to ensure all products meet company quality and food safety requirements during plant operations to ensure compliance with all company, regulatory and USDA standards. Role qualifications: Employee will need to be able to: Lift and stack up to 40 - 80 pounds Work at a fast pace for up to 3 hours at a time Work in a warm, dusty environment for extended periods. Work in a cold, moist environment for extended periods. Push and/or pull heavy objects Tolerate the sight of continuous moving objects Walk up and down multiple flights of stairs multiple times daily. Work in all weather conditions Be around chemicals for extended periods Adheres to all safety requirements including PPE (Personal Protective Equipment), preventing, and reporting unsafe acts and conditions, Lockout-Tagout procedures and Process Safety Management related matters. Maintains clean and safe working environment. Ensures product meets internal and customer specifications and takes appropriate actions when a non-compliance is noted. Accurately conducts product reviews for compliance to include grading, packaging, temperature control and weights. Performs and accurately records quality checks on product and regulatory checks as specified within company programs and USDA regulations. Monitors associates' work practices and addresses any deficiencies noticed immediately while continually evaluating potential for foreign material contamination while in assigned work areas. Inspects equipment for cleanliness and proper working condition prior to start up and records findings. Monitor production employees to ensure GMP compliance and reports violations Other responsibilities as assigned by Supervisor Essential Skills and Experience: Be dependable and honest. Time management: the ability to organize and manage multiple priorities Strong team player Commitment to company values Be able to work overtime when needed. Attention to detail a must Wear employer-specified protective gear, including gloves, face/eye shields, aprons, boots, etc. (some of which to be supplied by employer). Exposure to chemical solution (with protective gear) Perform varying tasks while standing, lifting, crouching, etc. during long periods of time. Perform all tasks safely and in a manner that will not create or pose a direct threat to the health and/or safety of the sanitation worker or any other person. Physical Demands and work environment: The physical and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands and work environment: Exposure primarily consists of wet and moist floors which include metal grating surfaces. May be exposed to temperatures of 28 degrees to 100 degrees Fahrenheit. May handle product 25 degrees to 50 degrees Fahrenheit. May be exposed to noise ranges of 50 db to 110 db. May be exposed to dust, feathers and all chemicals used in poultry, food, processing facility. Must wear and use protective and safety equipment required for the job as directed by the Company. Occasional exposure to carbon dioxide vapors 10ppm and chlorine less than 20 ppm. Able to stand for several hours. Work may include lifting (up to 80 lbs.), reaching, bending, pushing, extending.

What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Position Summary: Assists Engineers with designs, and creates, tests, and manufactures machinery, consumer products, and other equipment. Position Responsibilities: * Applies knowledge of mechanical engineering technology under direction of engineering and scientific staff. * Work is more limited in scope and more practically oriented than that of scientists and engineers. * Assists in product tests. * Makes sketches and rough layouts, records data, makes computations, analyzes results, and writes reports. * Prepares layouts and drawings of the assembly process and of parts to be manufactured. * Estimates labor costs, equipment life, and plant space. * Reviews project instructions and blueprints to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem, and possible solutions, such as part redesign, substitution of material or parts, or rearrangement of parts or subassemblies. * May be required to draft detail drawing or sketch for drafting room completion or to request parts fabrication by machine, sheet metal or wood shops. * Devises, fabricates, and assembles new or modified mechanical components or assemblies and products. * Sets up and conducts tests of complete units and components under operational conditions to investigate design proposals for improving equipment performance or other factors, or to obtain data for development, standardization, and quality control including field testing. * Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives, and modifies or adjusts equipment to meet specifications. * Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method. * May test and inspect machines and equipment in manufacturing departments or work with engineers to eliminate production problems. * Maintains inventory of common parts, with the use of an internal part ordering system Specific Knowledge, Skills or Abilities Required: * Ability to read and understand assembly prints * Familiar with MS Office, Outlook, and Excel * Must be able to manger time effectively * Ability to use some machine tools like milling, metal lathe, and or other equipment Position Qualifications: Education: HS Graduate, AA degree in a technical discipline or equivalent experience Experience: 4+ years prior quality control experience required, preferably in manufacturing environment Work Environment and Physical Requirements: Manufacturing Environment Lift up to 50 lbs. regularly Requires walking, standing, bending and lifting for long periods of time Vision abilities required to validate and enter data on computer Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs' essential functions. Note: FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions -including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations and social/recreational programs - on merit and the principles of equal employment opportunity. Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.

This position will be part of the xEV Drive Unit team for Electric Vehicle products and will be responsible for providing Supplier Quality support internally to the plant manufacturing teams for both New Product Introduction and Mass Production activity. The Supplier Quality Technician plays a critical role in ensuring that incoming materials and components from suppliers meet Astemo quality standards and requirements. This role supports the Astemo production lines by conducting initial problem analysis and containment activity to minimize impact of any supplier issues to the production lines. This position offers opportunities to work with multiple types of manufacturing processes, a wide variety of departments and levels of management within the company, and suppliers both domestic and international. Essential functions of this job include: Immediate line call response (initial problem assessment, communication to appropriate SQ members, etc) Lead containment activity for all supplier-related issues Support metrology group in receiving inspections of parts (basic measurements, reports, etc Minimum Qualifications (Education, Experience, and Skills): High School Diploma or GED 1-3 years of experience in Quality, in a similar manufacturing environment Demonstrated problem solving skills Excellent communication skills to prepare and present technical information to all levels of management Intermediate experience required in Windows, MSWord, PowerPoint, and Excel to perform job duties Preferred Qualifications (Education, Experience, and Skills): Associate's degree or technical certification in Quality, Manufacturing, Engineering, or a related field Experience with Automotive Quality Systems (PPAP/IPPAAR part approval, CAPA corrective/preventive actions) Knowledge of Geometric Dimensioning & Tolerance (GD&T), print interpretation Work experience in the automotive industry, with emphasis in electro/mechanical devices Essential to Job Functions - Physical and/or Mental Restrictions: Ability to work flexible schedule including all shifts and days as needed Ability to work for long periods of time while sitting Standing, walking, and bending for the duration of the workday Ability to lift 35lbs from floor to a height of 4ft Ability to push or pull pallet jack up to 450lbs Visual ability to work accurately with detailed information and a computer screen Description of Duties and Responsibilities % of Time Spent performing Duties Production Line Support and Supplied Part Investigation -50% Maintain tracking and reporting of containment activity -20% Receiving Inspection using Precision Equipment and Gauges -10% Provide necessary support to engineers as needed -10% Other Duties as Assigned -10% Skills and Abilities: Excellent analytical and problem-solving skills High level of accuracy and attention to detail Make sound business decisions, exercise good judgment and maintain high level of motivation Maintain effectiveness in high visibility situations, handle multiple functions efficiently and ensure deadlines are met Strong written and verbal communication skills and ability to interact with all levels of organization needed Maintain functional knowledge of processes, procedures and equipment within manufacturing Promote and carry out the Astemo Core Values Maintain a clean and orderly work environment according to 5S Ability to understand and follow complex oral and written instructions and technical terminology Serve as liaison between the plant and suppliers for Quality functions Supervisory Responsibilities: Will not supervise Work Environment - Travel, Noise, Smells, Quiet, Indoors or Outdoors, etc. Travel Required: 5~10% Domestic; 5~15% International (during project start-up phase) Open-Office Setting Factory Setting with Noise Equipment Used Personal Computer Simple measurement devices Precision tools Electro/Mechanical testing equipment Equal Opportunity Employer (EOE) - Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender, identity, disability, protected veteran status and national origin. At Astemo, we're challenging the status quo with the power of diversity, inclusion, and collaboration. Our goal is to build an inclusive work environment that celebrates the differences of our employees. We want to ensure that every employee feels valued, respected and empowered. We don't just accept difference-we celebrate it, we support it, and we thrive on it for the benefit of our employees, our products, and our community. Astemo is proud to be an equal opportunity employer. If you need a reasonable accommodation to apply for a job at Astemo, please send the nature of the request and contact information to ************************* when applying for the position.

medmix is a global leader in high-precision delivery devices, with leading positions in healthcare, consumer and industrial end-markets. Our customers benefit from our dedication to innovation and technological advancement that has resulted in over 900 active patents. Our 15 production sites worldwide together with our highly motivated and experienced team of nearly 2'700 employees are at service of our customers with uncompromising quality, proximity and agility. medmix is headquartered in Baar, Switzerland. Our shares are traded on the SIX Swiss Exchange (SIX: MEDX). We are looking for a Quality Technician to join us at medmix, at our new Greenfield Site outside of Atlanta, Georgia USA. This exciting opportunity will allow you use your skills to identify areas of improvement and propose recommendations to management. You will lead and drive the implementation of your recommendations and assess its impact to the business. If you are eager to learn, strive for personal development, are highly motivated and organized, and a great communicator, you can help us drive medmix to the next level. Job Description Job purpose Responsible for assisting with the implementation, management, and administration of the quality management system and ensuring products are manufactured per quality and regulatory requirements and industry best practices. Main Accountabilities and tasks May participate in “on the floor” audits of production personnel to ensure adherence to procedures and training effectiveness Conducts sampling, product testing, and visual inspection of components and/or finished goods; identifies nonconformances, if any, and ensures proper containment as required Completes accurate, timely, and legible documentation of all inspection/testing data Participates in weekly production walk-throughs to ensure quality compliance Engage in Safety, Quality, Production, and Plant related programs as required (Safety Observations, Meetings, Gembas, etc.) Participates in continuous improvement objectives to assure compliance with regulations Performs other duties as assigned by management Maintain and apply knowledge of current policies, regulations, and industrial processes for medmix USA Maintains quality records procedure and coordinates non-conformance reporting Compiles, analyze, and interprets statistical data related to quality operations May be required to cover position on their assigned shift due to absences for vacations, leave, etc. Perform all other miscellaneous duties as appropriately directed by Quality Management or designate Qualifications Desired experience and qualifications Work Experience: 1-3 years of experience in a regulated workplace preferred Education: Bachelor's degree preferred or equivalent with education and experience. Other: Experience with injection molding processes, parameters, and troubleshooting is preferred. 1-3 years of experience in a quality role preferred. Proficiency in personal computers, especially word processing software, spreadsheets, presentation, and database software. Ability to learn quickly and maintain the Quality Assurance metrics Knowledge of ISO standards or the ability to quickly learn and retain knowledge as required for system compliance Ability to perform work accurately and thoroughly and to work independently with minimal supervision Must be organized and can follow a systematic method of performing tasks and the ability to organize and direct a project to completion Must be self-directed and motivated to optimally utilize the available time to organize and complete expected work within given deadlines and reasonable work schedules Communication skills, both oral and written, as required to communicate effectively with others at all levels in the organization and to provide clear and concise reports and policies as needed. Ability to effectively present information publicly Ability to work well with subordinates, peers and superiors in all departments. Additional Information Benefits we offer: An innovative, vibrant and agile culture Growth opportunities in a globally successful and dynamic business on a growth trajectory Excellent employee benefits including Twelve (12) company paid holidays per year Medical, dental, vision, Life/AD&D, Short- and Long-Term Disability medmix Employee Savings Plan / 401k with 100% employer match up to 6% of your annual base salary Eligible to receive additional non-elective 401k contributions on a quarterly basis Employee Assistance Program Access to a wide range of discounts on shopping, entertainment and lifestyle Years of Service Awards medmix is an equal opportunity employer, committed to the strength of a diverse workforce. 93% of our employees would go above and beyond to deliver results - do you have the drive to succeed? Join us and boost your career, starting today!

Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Lead Auditor is responsible for planning, executing, and reporting internal audits to ensure compliance with ISO 9001 and company quality management system procedures. This role provides oversight of audit activities, identifies areas for improvement, and works closely with cross-functional teams to strengthen processes and maintain certification. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate of $15.85/hour If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Develop audit schedules and plans in alignment with ISO 9001 & company requirements. Lead internal audits of quality systems, manufacturing processes, and products. Develop, and maintain audit criteria for all audit activity. Document audit findings, prepare reports, and present results to management. Track corrective actions to ensure timely resolution. Verify effectiveness of corrective actions through follow-up audits. Ensure the company's Quality Management System (QMS) remains compliant with ISO 9001. Support external certification and customer audits and act as liaison with auditors. Maintain audit records and related database accuracy. Identify systemic issues and recommend process improvements. Provide training and guidance to employees on ISO 9001 requirements and audit practices. Promote a culture of quality, compliance, and accountability. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Lead Auditor must have proven root cause problem-solving experience, attention to detail & documentation accuracy. Strong knowledge of ISO 9001 standards, QMS, and process / product audits; excellent communication, analytical, and report-writing skills, and the ability to lead cross-functional teams and manage multiple audits simultaneously. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. RESPONSIBILITIES OF THIS POSITION: ASQ Certified Quality Auditor or Certified ISO 9001 Lead Auditor (Preferred). 5 years of experience in manufacturing quality assurance, with at least 3 years in auditing. Proficiency in quality tools and software for managing & tracking audits & corrective actions. Ability to assess adequacy of objective evidence to close audits and corrective actions. Excellent leadership, communication, and problem-solving skills. Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning new software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.