Quality inspector jobs in Aurora, CO - 127 jobs

The Quality Control Technician at our 503B outsourcing facility is responsible for ensuring that all products meet the highest standards of quality and safety before they reach our clients. This role involves performing various tests and inspections on raw materials, in-process samples, and finished products, and environmental monitoring in cleanroom environments. The Quality Control Technician will work closely with production, quality assurance, and other teams to identify and resolve any quality issues, maintain accurate documentation, and support continuous improvement initiatives. This position requires a strong understanding of Good Manufacturing Practices (GMP), FDA regulations, and 503B guidelines, along with excellent attention to detail and analytical skills. Responsibilities Conduct routine testing and inspection of raw materials, in-process samples, and finished products to ensure compliance with established quality standards and specifications. Perform environmental monitoring, including sampling of air, surfaces, and personnel in cleanroom environments, ensuring adherence to GMP regulations. Maintain accurate and detailed records of all quality control activities, including test results, deviations, and corrective actions. Collaborate with production and quality assurance teams to investigate and resolve any quality issues or non-conformances. Operate and maintain laboratory equipment, ensuring proper calibration and function according to standard operating procedures (SOPs). Participate in the validation and qualification of new equipment, processes, and methods to ensure consistent quality and reliability. Assist in the development and revision of SOPs, work instructions, and other quality-related documents. Ensure timely and accurate completion of all required documentation and reports, maintaining compliance with FDA regulations and 503B guidelines. Support internal and external audits by providing necessary documentation and responding to audit findings in a timely manner. Stay current with industry trends, regulatory updates, and best practices related to quality control and 503B outsourcing facilities. Assist in the training and mentoring of new quality control staff, ensuring adherence to company policies and procedures. Work closely with the Quality Assurance team to implement and monitor quality improvement initiatives. Conduct stability testing and data analysis to ensure product integrity over specified shelf life. Physical Requirements Must possess 20/20 vision (with or without correction) and be able to pass vision and colorblindness test Qualifications TRAINING (e.g. Professional Qualifications, On-the-job Training, Education) An equivalent combination of education, training, and experience may substitute. High School Diploma or equivalent College degree preferred Exceptional attention to detail Current Good Manufacturing Practices (cGMP) Experience Preferred Good Documentation Practices (cGDP) experience preferred Cleanroom experience & experience wearing Personal Protective Equipment (PPE) preferred Excellent verbal and written communication skills Experience with Microsoft Office Suite (Word, Excel) and ability to utilize various software programs Strong work ethic and ability to work effectively as a team The Quality Control Team provides critical support to the Production Team. This is a 100% on-site position. Reliable transportation and punctuality are required Must be able to lift items repeatedly (lifting as a team for heavier items) Must be able to work in a variety of positions and locations such as sitting, standing, squatting, kneeling, reaching, and walking, for prolonged periods of time Must be able to wear required PPE for extended periods of time Position requires handling of laboratory chemicals or hazardous materials Must be able to use necessary equipment such as computers, scanners, or other technology devices as assigned Travel As part of your job duties, travel may be required. If applicable, you will be compensated at the current IRS mileage reimbursement rate.

Description The Quality Inspector role offers the opportunity to ensure excellence across manufacturing and inspection processes, supporting compliance, quality standards, and customer specifications. This position plays a key role in delivering high-quality products and services while collaborating with Engineering, Project Management, Procurement, and Manufacturing teams. Quality Inspectors drive continuous improvement, identify non-conformances, and help create a culture of safety, accountability, and operational excellence. This role provides hands-on experience with inspection tools, blueprints, and technical drawings, with increasing responsibility based on experience level. It offers the chance to mentor and develop team members, influence process improvements, and contribute directly to the success and efficiency of manufacturing operations. RK Company Overview As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services. Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collaboration. Our exclusive building methodologies, accredited safety standards and professional execution allow us to turn our customers' greatest concepts into reality. The Quality Inspector will be responsible for ensuring that all manufacturing and inspection activities align with established quality standards, process documentation, and customer specifications. This role plays a key part in cross-functional teams including Engineering, Project Management, Procurement, and Manufacturing teams. The Quality Inspector upholds organizational performance by driving compliance, identifying non-conformances, and contributing to continuous improvement initiatives. Role Responsibilities Provide overall supervision for assigned project processes, including achieving performance metrics for safety, quality, delivery, and productivity. Drive the application of Lean Manufacturing tools and concepts to achieve measurable and sustainable improvements for assigned project processes. Train, mentor, and grow production team members to build a high performing and engaged workforce. Supervise manufacturing personnel, ensuring alignment, engagement, development, and retention of talent. Promote a culture of safety, accountability, continuous improvement, and operational excellence consistent with RK Mission Critical values. Identify opportunities for process efficiency and waste reduction. Accountable for the supervision of assigned project processes, including adherence to safety requirements, and standard work instructions. Coordinate with the Production Manager to provide tactical input on manufacturing support and execution. Participate in the development and implementation of manufacturing processes, including hazard analysis, safety procedures, and team member skill assessments. Perform these and other comparable related duties as instructed by the management team. Qualifications Quality Inspector-1: Includes All of the above plus: High school diploma or GED required; additional vocational or technical training preferred. 2+ years of related experience, preferably in a manufacturing or construction environment. Receives direct supervision in performing technical responsibilities. Familiar with basic inspection tools and techniques. Ability to follow detailed instructions and work in compliance with standard procedures. Understands acceptance criteria and is aware of internal and external quality expectations. Actively supports team goals and production timelines. Displays judgment and initiative in resolving issues and making recommendations. Willingness to contribute to continuous improvement efforts. Proficient in Microsoft Office 365 and capable of navigating ERP systems. Brings energy to a team under the general supervision of an experienced professional or manager. Quality Inspector-2: Includes All of the above plus: Associate degree or equivalent combination of education and experience. 4+ years of quality experience in manufacturing or construction, with increasing responsibility. Reads and interprets blueprints, diagrams, technical drawings, and models independently. Able to perform majority of installer tasks independently while meeting quality and delivery expectations. Strong understanding of industry standards such as NFPA 70 (NEC), NECA, and NEMA. Experience managing non-conformances and supporting corrective/preventive action processes. Effective communicator with strong documentation and reporting skills. Strong attention to detail and commitment to quality. Able to design and deliver basic training on inspection protocols or tools. Demonstrates initiative, problem-solving ability, and independent judgment in evaluating quality issues. Effectively balances workload while consistently meeting deadlines and shifting demands. Proactively collaborates with team members to meet production goals. Understands continuous improvement initiatives and is willing and able to make contributions. Quality Inspector-3 (Exempt): Includes All of the above plus: Senior-level Inspector responsible for complex installation requirements, troubleshooting, and team leadership. 6+ years of quality experience in manufacturing or construction, with increasing responsibility. Demonstrated ability to independently perform complex inspections and resolve quality issues. Proven experience identifying process gaps and suggesting effective improvements. Working knowledge of ISO 9001 principles and quality management systems. Excellent problem-solving skills with a proven ability to collaborate with engineering, project management, and production teams to effectively resolve complex related challenges and plan upcoming projects. Reads and interprets advanced blueprints and manages job requirements independently. Leads, trains, mentors, develops, and drives a quality team. Demonstrates deep understanding of methods, tools, standards, and quality assurance. Actively supports lean manufacturing principles and continuous improvement initiatives. Minimum Physical Requirements and Accountability Work outside, inside, and in dusty, noisy and hazardous areas. Work in high places, tight places, confined spaces and/or other adverse locations. Climb, balance, squat, kneel and crouch for extended periods. Ability to lift, move, and/or carry 50 lbs. Comply with all company policies and procedures. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis. RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

Job DescriptionSalary: $20/hr - $33/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense & space OEMs / Primes & Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts; machined out of standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed, Northrop) to provide components to mission critical civilian and defense programs. Job Purpose: The Quality Inspector performs inspections of product against customer requirements and according to internal procedures while maintaining the timely flow of product and minimizing escapes and other non-conforming materials. Quality Inspector Key Responsibilities and Accountabilities: Perform First Piece, Lot and Final Inspections against customer requirements Conduct in-depth review and able to properly interpret acceptance criteria in accordance with customer purchase order & specifications, including industry standards Command of problem solving techniques such as; 8D, Fish-Bone, 5-why & facilitate Team Based Root Cause Corrective Action(s). Define detailed in-process & final inspection plans Audit in process inspection reports/checklist on the production floor Perform and fill out AS9102 First Article Inspections and Inspection Reports Compile and confirm the accuracy of customer required shipment paperwork Understand and follow internal inspection procedures and maintain inspection records Proper tool selection based on tolerance zones Understand and maintain the ERP system per company policies Keep current with industry inspection techniques, practices and required standards Understand and stay current with industry standard inspection equipment; including calipers, micrometers, bore gauges, height gauges, indicators, etc. and the calibration and maintenance of these instruments Understand and stay current with GD&T standards, terminology and inspection methodologies Be willing to perform other duties as assigned (Calibration, Audits, CAPA, Customer Complaints, RMAs, etc.) At least 3-5 years practical experience in bench inspections and general practices and methodologies Requirements Experience with AS9100 and AS9102 Working knowledge of Special Processes Minimum of 3-5 years practical experience working with bench inspection processes and in-process inspections Working knowledge of Geometric Dimensioning and Tolerancing (GD&T) Strong time management Ability to work independently and meet deadlines Experience working in a manufacturing environment Good verbal and written communication Experience working with MS Excel and Word We offer comprehensive benefits including: Paid Time Off 401(k) with employer match Quarterly Incentive compensation Paid Holidays Medical, dental, vision & life insurance Short- and long-term disability IMPORTANT NOTICE: To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen, or lawful permanent resident of the U.S. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

Apply Description $500 New Hire Bonus! Quality Inspector Job Duties Include: Approving finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; performing and/or verifying others' re-work. Quality Inspection Includes: • Ability to read, understand, and follow documented work instructions and Quality Plans for injection molded and assembled parts • Visual inspection and comparison to established cosmetic standards • Dimensional Inspection using manual tools and electronic measuring systems • Calipers, Micrometers, Pressure Testers, CMM, SmartScope, and others • Receiving Inspection • Verification of attributes of materials, inserts, and other components • Product Labeling and Traceability Verification • Documentation of inspection results Education and/or Experience Requirements: • Basic Math Skills, including reading and interpreting instrumentation • High School Diploma or Equivalent • Ability to speak, read, and write basic and technical English (Spanish is a plus) • Experience in Manufacturing Quality or Plastic Injection Molding a plus but not required Pay is $18 to $35 depending on experience and includes paid vacation, paid sick leave, health insurance and 401K with company match. Please apply through this ad. or Drop off resume at: Caroba Plastics 3219 S. Platte River Dr. Englewood, CO 80110 - Please make sure you tell the receptionist you are applying for the QC position. Please no phone calls regarding job posting.

Full-time Description A Quality Control/Floor Inspector assists the Chief Inspector with all things as required and needed in support of the Repair Station and operations. This person reports directly to the Chief Inspector. Key Duties and Responsibilities: Maintain a clean and orderly workspace. Work efficiently with the team to ensure a smooth workflow. Assist the Chief Inspector with logbook research as required. Perform aircraft inspections when not inspecting discrepancies or work orders. Assist the Chief Inspector with floor inspection items. Giving the “ok to close panels” and being the “backup” to ensure quality and safety of our products. Assist the Chief Inspector with returning aircraft to service after work is completed. Ensure that we are delivering a safe aircraft that meets our quality standards. Inspecting discrepancies once completed for proper repairs, correct paperwork, and correct sign-off of discrepancies. (Make sure accepted or approved procedures are used at all times). Other duties as assigned. Benefits Available with employment: Medical, Dental, Vision and Supplemental Plans Estimated application closing date: 10/31/25 Requirements Qualifications Education Requirements: Must have High School Diploma or GED Must have an FAA approved Airframe and Powerplant license. Experience Requirements: Ability to work independently with minimal direction. Ability to understand technical publications and requirements. Clear understanding of FAA and Repair Station requirements. Assist with or undertake any other duties as assigned by key personnel. Ability to work with several individuals while showing independence in balancing and prioritizing requests. Three years business/corporate aircraft maintenance experience Other Requirements: Clean driving record. Able to pass a background check. Ability to pass a drug screening test. Occasionally required to lift up to 35 pounds. Must be able to sit, stand, kneel and climb ladders. Must be able to show up to work on time ready to work. Must have dependable transportation to and from work. Ideal Candidate Will Possess the Following Skills: Attention to detail. Sincere desire to assist others. Able to develop a friendly rapport. Persistence in the face of obstacles. Professional in appearance and mannerisms. A willingness to take on responsibilities and challenges. Being reliable, responsible, and dependable, and fulfilling obligations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. Being sensitive to others' needs and feelings and being understanding and helpful on the job. Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. An ability to guide oneself with little or no supervision, depending on oneself to get things done while following the requirements of the Repair Station. Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace. Salary Description $34-$45/hr DOE

York Space Systems was founded to radically improve spacecraft affordability and reliability, transforming, and enabling next-generation space mission operations worldwide. Today, York is one of the most innovative aerospace companies, specializing in end-to-end customer solutions and the rapid production of spacecraft platforms. York's complete Space Segment Solution includes spacecraft production, payload integration, system integration & test, launch services, ground segment services, and mission operations, enabling customers to leverage York's existing technology solutions to get to orbit rapidly and responsively. The Quality Inspector II is primarily responsible for the physical inspection and documentation of the conformance of various material and components received in support of production. Typical daily responsibilities include dimensional inspection of components, creation of inspection documentation, review of vendor provided materials, support to non-conformance processes and engagement with supported teams including production, inventory and procurement. This role ensures compliance with industry best practices included in quality standards, customer requirements, and regulatory guidelines. The Quality Inspector II will analyze non-conformances, lead/support root cause and corrective action investigations, and work cross-functionally to improve product quality and process efficiency.KEY RESPONSIBILITIES Non-Conforming Material & Process Management Identify, document, and manage non-conforming material through quality processes. Support quality leadership in the management of material dispositions. This could include participating in non-conforming material investigations using problem-solving methods such as 8D, 5-Whys and Fishbone Diagrams. Support containment activities to minimize production disruptions and customer impact. Maintain and improve the non-conformance management system to ensure traceability, accuracy, and regulatory compliance. Quality System & Compliance Support compliance to quality standards, customer-specific requirements, and other applicable industry regulations. Participate in internal and external audits, including customer, regulatory, and third-party audits. Ensure proper documentation and records management related to non-conforming material and corrective actions. Support the creation of quality processes and procedures including material handling. Conduct or support training of quality processes and procedures to other teams. Conduct of Quality Inspections Using and maintaining measurement tools, systems and best practices complete inspections of various materials and components against engineering documentation and industry standards. Document completed inspections and initiate appropriate actions where non-conformance may be identified. This could include preparing detailed reports for engineering, quality, production or procurement. Ensure vendor compliance to any industry standards called out in purchasing contracts or documentation. This could include AS9102 FAI, IPC or Mil-Std requirements Process Improvement & Risk Mitigation Work with cross-functional teams to implement process improvements that reduce defects and enhance product quality. Participate in risk assessments related to non-conforming material and critical process deviations. Contribute to continuous improvement initiatives, such as Lean and Six Sigma and Kaizen projects, to enhance manufacturing efficiency and product reliability. QUALIFICATIONS AND EXPERIENCE High school diploma with a preferred technical certification or associate degree in a related field. 3-5 years of experience in quality inspection or manufacturing within the aerospace, defense, or related high-reliability industry. Knowledge of quality standards, and regulatory requirements. Experience with quality tools such as 8D, FMEA, SPC, and Six Sigma methodologies. Ability to interpret engineering drawings & specifications. Excellent communication and problem-solving skills with the ability to work cross-functionally. Proficiency in quality management systems (QMS), ERP systems, and data analysis tools. PREFERRRED QUALIFICATIONS Experience with AS9100, ISO9001 or AS9102 Quality Standards. Experience with industry standards including IPC-A-610, IPC/WHMA-A-620, J-Std-001, ASME Y14.5 and MIL-Standards. Hands-on experience with quality inspection and testing methods.

About Us We are a leading sheet metal fabrication company in Denver, CO, specializing in high-quality precision parts for the industrial, commercial, and automotive markets. We are committed to delivering superior products through disciplined processes, teamwork, and continuous improvement. Position/Job Summary: The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) Verify part conformance to engineering drawings, tolerances, and work instructions Read and interpret blueprints, GD&T, and manufacturing specifications Document inspection results accurately in quality records, travelers, and digital systems Identify nonconformances Conduct surface finish, weld quality and dimensional inspections as required Collaborate with production operators and supervisors to resolve quality issues Maintain a clean, organized, and safe work environment Support continuous improvement initiatives Qualifications Required: 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing Ability to read and interpret blueprints Proficiency with standard inspection tools Strong attention to detail and accuracy Ability to work independently on 2nd shift Basic computer skills for data entry and documentation Preferred: Experience with FAIRs & ISO 9001 environments Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements Ability to stand for extended periods Ability to lift up to 40 lbs. Frequent bending, reaching, and handling of materials Location: Denver, CO Shift: 2nd Shift (Typical hours: 4:00 PM - 12:30 PM, Monday-Friday) Department: Quality Control Employment Type: Full-Time What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

About Us We are a leading sheet metal fabrication company in Denver, CO, specializing in high-quality precision parts for the industrial, commercial, and automotive markets. We are committed to delivering superior products through disciplined processes, teamwork, and continuous improvement. Position/Job Summary: The 2nd Shift Quality Control Inspector is responsible for performing in-process and final inspections of sheet metal components to ensure compliance with drawings, specifications, and customer requirements. This position plays a key role in maintaining product quality, preventing defects, and supporting a culture of operational excellence. Key Responsibilities * Perform in-process, first-article, and final inspections using standard metrology tools (calipers, height gauges, micrometers, pin gauges, thread gauges, etc.) * Verify part conformance to engineering drawings, tolerances, and work instructions * Read and interpret blueprints, GD&T, and manufacturing specifications * Document inspection results accurately in quality records, travelers, and digital systems * Identify nonconformances * Conduct surface finish, weld quality and dimensional inspections as required * Collaborate with production operators and supervisors to resolve quality issues * Maintain a clean, organized, and safe work environment * Support continuous improvement initiatives Qualifications * Required: * 1+ years of experience in quality inspection, preferably in sheet metal fabrication or manufacturing * Ability to read and interpret blueprints * Proficiency with standard inspection tools * Strong attention to detail and accuracy * Ability to work independently on 2nd shift * Basic computer skills for data entry and documentation * Preferred: * Experience with FAIRs & ISO 9001 environments * Knowledge of welding inspection (visual weld criteria, AWS standards) Physical Requirements * Ability to stand for extended periods * Ability to lift up to 40 lbs. * Frequent bending, reaching, and handling of materials Location: Denver, CO Shift: 2nd Shift (Typical hours: 4:00 PM - 12:30 PM, Monday-Friday) Department: Quality Control Employment Type: Full-Time What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

SEAKR is looking for a motivated Lead, Quality Control Receiving Inspector (QCRI) who has experience inspecting high-reliability Mechanical and EEE (electrical) components. A successful candidate will have a technical aptitude with analytical problem-solving skills, the ability to work in a team environment, and effective time management skills for efficient task prioritization. The QCRI reports to the Receiving Inspection Supervisor within the Supply Chain division. Job responsibilities include… * Verifying documentation, materials, and products meet the PO and engineering drawing requirements * Performing basic dimensional inspections using micrometers, calipers, feeler gages, etc. * Performing basic electrical inspections such as continuity testing in accordance with engineering drawing requirements * Managing multiple receipts simultaneously, in different physical and electronic locations * Navigate SEAKR's Enterprise Resource Planning (ERP) tool to support review, routing, and disposition non-conforming product and/or electronic inventory transactions * Tracking and documenting arrival reports * Processing and managing supplier RMAs * Create, document, and implement inspection criteria and procedures * Maintain an active role on internal continuous improvement teams * Provide CMM testing and reporting as required * Review and edit documentation as required. * Able to work independently and as a team, along with Property, Supply Chain (Buyers), SQE's, QE's and other department/teams as required. * Cover and report team duties in absence of the RI Supervisor when required.

Perform in-process inspection on product being processed through the work cell, specifically at SMT, Wave and Selective Soldering operations. Essential Duties and Responsibilities: Adhere to all ESD requirements and Board Handling. Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture sensitive levels (MSL). Verify process compliance to document control process and procedures. Examine product to verify conformance to workmanship standards. Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting unacceptable materials through the designated ERP system. Inspect product being processed through work cell according to specific in-process inspector training and procedure, along with IPC-A-610 & J-STD-001 workmanship standards. Documents inspection results by completing reports and logs as applicable. Resolve quality-related issues in a timely matter. Approves finished material and/or product by confirming specifications, conducting visual measurement tests, returning products for re-work and confirming re-work. Responsible for stopping processes, with communication to Production Supervisor, lead and/or engineering, to control manufacture of non-conforming assemblies. Support and follow all ISO standards related to various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. Maintains safe and healthy work environment by following standards and procedures, and complying with legal regulations. Perform all other duties, as assigned. Qualifications Job Knowledge, Skills & Abilities: Ability to apply IPC-A-610 standard requirements Ability to apply J-STD-001 standard requirements Ability to apply IPC-600 standard requirements Written and verbal communication skills Basic computer skills Knowledge of interpretation of designated specifications High attention to detail. Sense of urgency, successful at meeting deadlines. Ability to work effectively as part of a team. Monitor processes, materials, or surroundings. Experience/Education: High School Diploma or equivalent. 2 year minimum, Electronics manufacturing experience preferred. Experience with measuring devices such as calipers, pin gauges, feeler gauges, height gauges and other measuring instruments Experience with automated measuring equipment is a plus: SmartScope, CMM, etc. Certification to IPC-600, IPC-610 & J-STD-001 is a plus Experience with GD & T is a plus NEOTech is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law. NEOTech has a long-standing commitment to maintaining a safe, quality-oriented and productive work environment. We also want all employees to perform their duties safely and efficiently, in a manner that protects their interests and those of their co-workers. We recognize that alcohol and drug abuse pose a threat to the health and safety of NEOTech employees and to the security of the Company's equipment and facilities. For these reasons, NEOTech is committed to the elimination of drug and alcohol use and abuse in the workplace. Candidates being considered for hire must pass a pre-employment background check and drug test which include screening for illegal drugs and marijuana.

Perform in-process inspection on product being processed through the work cell, specifically at SMT, Wave and Selective Soldering operations. Essential Duties and Responsibilities: * Adhere to all ESD requirements and Board Handling. * Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture sensitive levels (MSL). * Verify process compliance to document control process and procedures. * Examine product to verify conformance to workmanship standards. * Inspects and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting unacceptable materials through the designated ERP system. * Inspect product being processed through work cell according to specific in-process inspector training and procedure, along with IPC-A-610 & J-STD-001 workmanship standards. * Documents inspection results by completing reports and logs as applicable. * Resolve quality-related issues in a timely matter. * Approves finished material and/or product by confirming specifications, conducting visual measurement tests, returning products for re-work and confirming re-work. * Responsible for stopping processes, with communication to Production Supervisor, lead and/or engineering, to control manufacture of non-conforming assemblies. * Support and follow all ISO standards related to various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. * Maintains safe and healthy work environment by following standards and procedures, and complying with legal regulations. * Perform all other duties, as assigned.

PCB Manufacturing | QC Inspector Scope: Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: Be able to complete AS 9102 Reports Perform Final Inspection on finished product to ensure compliance to customer requirements. Read customer drawings Perform measurements with measurement tools such as calipers, micrometers, and pin gages. Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding Verify acceptability of rework after completion Identify and mark non-conforming product to ensure it is not delivered Prepare standard and AS9102 First Article Reports as needed Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product Complete Deliverables for Customers and ensure they are complete and accurate Complete department logs and record yield data as required Perform preventative maintenance as defined by department maintenance schedule Support other work areas or departments as required by production or management. Ability to work overtime as requested Keep work area clean and organized Requirements Essential Qualifications, Education and Experience: High school diploma or equivalent One year of Quality Control experience Knowledge of AS 9100 Strong work ethic Ability to work effectively in a team environment Physical Requirements: Prolonged periods sitting and performing visual and manual tasks. Fine motor skills Ability to use microscopes for long periods of time performing job duties

Summit Interconnect is the premier electronics manufacturer in the US, located in Aurora, Colorado. Specializing in printed circuit board (PCB) assembly, we build the latest application designs from leading technology companies. From satellites and rocket payload to cutting-edge medical devices, we are known for our speed, service, and impeccable commitment to quality. We are continuously innovating our processes and systems to stay on the cutting edge of printed circuit board assembly manufacturing. Our vision is to have the best employees working to provide an outstanding service experience, and the coolest technology solutions for our customers. We look forward to you joining the team! Position Summary Execute the inspection of electronic assemblies according to industry specific standards. Ensure that the specifications of the established quality standards are met on all out-going products. Assist the Quality Assurance Manager, Production Manager and other company leadership with quality related functions as required. What you will do…. Inspect Printed Circuit Boards (PCBs) and Printed Circuit Boards Assembly (PCBAs) using microscope and magnifying tools following supplied data from customer and IPC-A-610 guidelines. Complete customer Certificates of Compliance (C of C) as required. Ability to separate good and non-conforming product during inspection process. Log inspection findings into electronic logs. What you need… High school diploma or equivalent. Minimum experience of 1 year in Electronic PCB Assembly. Minimum experience of 1 year in Quality Control. Understanding of quality concepts including sampling plans and continuous improvement Good working knowledge and understanding of PCBA manufacturing processes. Ability to read and interpret drawings, prints and component datasheets. Familiarity with basic measuring instruments tools and gauges (calipers, micrometers, etc.) Proficient with Microsoft office (Excel, Word, etc.). Excellent communication skills both written and verbal. (Including ability to read, understand and explain GMP, process procedures and other necessary documentation). Positive attitude to changes. Self-motivated with a team attitude. Be able to work scheduled and extra hours as required. Attention to detail. Preferred Proficient with IPC-A-610 standard (CIS preferred) Location: 20100 E 32nd Pkwy, #225 Aurora, CO 80011 Compensation : -$19.00-$20.00 /hour DOE +shift differential Schedule: Monday-Friday 11:00am-7:30pm Benefits Advanced Assembly has an excellent benefits program. We believe in taking care of our employees. We also have fun with regular company events, BBQ's, employee recognition awards, and performance- based bonus plans. Competitive Benefits Include: Medical Dental Vision EAP (free employee assistance programs) 401(k) plan Life Insurance Paid Time Off (PTO) Seven (7) paid holidays a year Candidates must pass background and drug testing. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic. tation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic.

Inspection & Packaging Lead (3rd shift) This position reports directly to the Inspection and Packaging Supervisors as well as the VILP Manager. The role is responsible for general support of the Visual Inspection, Labeling, and Packaging of finished sterile compounds. The Lead is responsible for ensuring the accuracy for label reconciliation, document completeness and correctness of all product identification. Why Join Leiters Health? Are you passionate about making a real impact in the pharmaceutical industry? Do you thrive in a collaborative, innovative environment where your skills and ideas are valued? Look no further - Leiters Health is seeking talented individuals like you to join our dynamic team! At Leiters Health, we're not just another pharmaceutical company - we're pioneers in the field, dedicated to delivering high-quality compounded sterile products and outsourced solutions to healthcare providers nationwide. Our commitment to excellence and patient safety is at the core of everything we do. Innovative Culture: Be part of a forward-thinking company that encourages creativity, welcomes fresh ideas, and fosters an environment of continuous improvement. Meaningful Work: Contribute to a purpose-driven organization dedicated to providing critical medications and healthcare solutions that positivelyimpactpatients' lives. Professional Development: Access ongoing training, mentorship, and growth opportunities to expand your skills and advance your career within a rapidly growing industry. Cutting-EdgeTechnology: Work withstate-of-the-artfacilities and advanced technologies, staying ahead of the curve in pharmaceutical manufacturing. Collaborative Environment: Join a team of passionate individuals who are dedicated to teamwork, support, and mutual success, fostering a culture of inclusivity and collaboration. Who We're Looking For: We're seeking enthusiastic individuals who are driven, adaptable, and passionate about contributing to a mission-driven organization. Whether you're an experienced professional or just starting your career, Leiters Health provides an environment where your skills and talents will be recognized and appreciated. Sound like you? Apply today! Essential Functions: Lead and perform the line/area clearance of the visual inspection or label, and packaging activities. Review of batch record during and end of visual inspection, label, and packaging activities. Assist Inspection & Packaging Supervisors in overseeing employees who are responsible for visual inspection/labeling/packaging of finished goods. Collaborate with Inspection & Packaging Supervisors to ensure timely visual inspection and labeling of products to meet scheduled batch release dates. Ensure that training on SOPs and processes remains current. Analyze Production efficiencies downtime and waste. Lead teams to improve the results. Write investigations and CAPA actions for non-conformances in the department. Work with QA to quickly resolve any variance or document errors so that product may be released on time. Lead Problem Solving activities. Assist with maintaining batch and label inventory and managing daily staffing for visual inspection and labeling. Other duties as assigned. Supervisory Responsibilities: Lead a team of Associates, providing direction, support, and training. Provide a positive and collaborative work environment through effective communication and accountability, escalating conflict promptly and fairly. Experience and Necessary Skills: 1-year previous leadership experience or comparable experience preferred. Minimum 1 years' experience in aseptic processing preferred. Knowledge of cGMP guidelines/standards. Bachelor's degree or relevant experience preferred. Demonstrated written and oral communications skills including strong presentation skills. Excellent organizational skills and results oriented. Strong results orientation. Strong Microsoft Office skills are essential, proficient in the use of spreadsheets and word processing programs Ability to effectively bring others together and reconcile differences. Able to lift up to 50 lbs. and stand for extended periods when required Must pass an eye exam confirming 20/20 near vision corrected (with contacts or glasses) or uncorrected Must pass an eye exam confirming the ability to accurately perceive color Benefits: Smart healthcare coverage options that rewards wellness (and puts money back in your pocket!) Flexible Spending & Health Savings Accounts (FSA & HSA) available Dental & Vision insurance Employer Paid Life Insurance & Employee Assistance Program Short Term & Long-Term Disability Insurance Up to 4% 401K Matching (100% vested on day one!) Generous Paid Time Off Options - vacation,sick, paid leave and holidays! $5,250 Annual Tuition Reimbursement after 6 months $1,000 Referral Bonus Program with no limit Eligible for annual bonus program Timeline: We will be accepting applications on an ongoing basis until position is filled. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. *Please note that we do not work with third-party recruiters or agencies for this position. If you are a qualified candidate and wish to apply for this job, please do so directly through our official application process. We appreciate your understanding and cooperation in this matter. Monday - Friday 1130pm to 8am

Quality Inspector - 2nd Shift Reports to: Quality Manager Department: Quality Wage Range: $19.00 to $24.00 Are you a forward-thinking leader passionate about optimizing supply chain operations? PTA Plastics, an employee-owned and innovative leader in the plastic injection molding, contract manufacturing and tool-building industry, is looking for a Quality Inspector to join our dynamic team. At PTA Plastics, we're more than just a manufacturer; we partner with Fortune 500 OEMs in the medical device, defense, homeland security, and technology sectors, constantly pushing the boundaries of product development and manufacturing excellence. As an employee-owned company, every team member has a stake in our success, creating a collaborative and entrepreneurial environment where innovation thrives. Job Summary: The 2nd Shift Quality Inspector is responsible for ensuring that all plastic products meet the company's quality standards and specifications. This role involves inspecting products at various stages of the manufacturing process, performing tests, and identifying any defects or issues that could affect product performance and safety. The Quality Inspector will work closely with production teams to ensure continuous improvement and compliance with quality regulations. Key Responsibilities: Conduct visual and dimensional inspections of plastic products to ensure they meet quality specifications. Perform tests to check for material strength, durability, and other physical properties. Use measuring tools such as calipers, micrometers, gauges, and other inspection equipment to assess product dimensions and tolerances. Record and maintain detailed inspection reports, including measurements, test results, and any identified defects. Prepare and update quality control checklists and procedures. Maintain accurate and organized records of all inspections and tests performed. Monitor the production process to ensure adherence to quality standards. Identify non-conforming products and initiate corrective actions. Work with production and engineering teams to resolve quality issues and implement process improvements. Ensure compliance with industry standards, safety regulations, and company policies. Collaborate with production teams to provide feedback on quality issues. Participate in meetings to discuss quality control results and improvement strategies. Assist in training production staff on quality standards and inspection procedures. Suggest and implement improvements to inspection processes to enhance product quality and efficiency. Stay up to date with industry developments, new inspection techniques, and technological advancements. What We're Looking For: High school diploma or equivalent; associate degree or certification in quality control, engineering, or a related field is preferred. Proven experience as a quality inspector in a plastics manufacturing environment. Familiarity with quality control standards (e.g., ISO 9001). Strong knowledge of inspection equipment and measuring tools. Ability to read and interpret technical drawings, blueprints, and specifications. Excellent attention to detail and problem-solving skills. Good communication skills and the ability to work well in a team. Ability to work in a fast-paced environment and handle multiple tasks. Physical Requirements: Ability to stand for long periods and perform repetitive tasks. Comfortable working in various environmental conditions, including noise, heat, cold, and exposure to chemicals. Ability to work in a fast-paced environment and adapt to changing priorities. Comfortable wearing personal protective equipment (PPE) such as safety glasses, gloves, and ear protection when on the manufacturing floor. Ability to work in temperature-controlled environments and withstand exposure to noise levels associated with manufacturing machinery. Ability to receive, comprehend and utilize required training from OSHA and Company including but not limited to the following: Hazard Communication, Lock Out/Tag Out, First Aid and CPR (optional) AAP Statement: PTA Plastics is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice*

Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

Quality Control Inspector - 26000006Description What We Are Looking For We need a detail-oriented individual to perform visual, mechanical, functional, and dimensional inspections on various medical device products using specialized test equipment. Your responsibilities will include conducting timely quality reviews of device history records to ensure proper batch disposition and release. As a key member of our Quality Control Team, you'll serve as a reviewer and approver for both products and documentation, ensuring full compliance with customer specifications and regulatory requirements. Join our growing team where your attention to detail can make a real difference in the quality of life-saving medical devices! Onsite This role has an onsite work schedule requiring the person to be in the onsite location 5 days a week. What's in it for You! Competitive Pay: $21. 00 - $23. 00 per hour. Our employees are the best part of our company. We want you to feel valued, appreciated, and included. Because of this, we make sure your hard work is recognized. Paid Leave (US ONLY): Enjoy time away from work with Company paid holidays and a flexible working schedule through our paid time off (PTO) policy. Yep, you read that correctly. We are a Company that values you and makes sure you take time for yourself. 401(k): Prepare for a secure retirement with our 401k plan, which includes an employer matching contribution. Comprehensive Health & Wellness Plans: We offer a comprehensive benefit package that includes medical, dental and vision coverage, company-paid short-term and long-term disability insurance, as well as company-paid basic life insurance that supports you during your career with us. We believe that taking care of our employees is essential, and these benefits reflect our commitment to your health, security, and peace of mind. Global Team: With our state-of-the-art corporate headquarters in Rock Hill, South Carolina, our global team has a presence across more than 15 countries worldwide. Experience a workplace comprised of talented individuals who are passionate about serving our customers and each other. Innovative Culture: Innovation is at the heart of what we do! Since our founding in 1986 by Chuck Hull, the inventor of 3D printing, we have continuously pushed the boundaries of what is possible with additive manufacturing. When you join 3D, you will have the opportunity to work with cutting edge technology in an innovative and collaborative culture!Talent Development: At 3D Systems, we invest in talent programs to support employees with opportunities to grow, contribute, develop, and thrive in their careers. Connection & Engagement Opportunities: We strive to cultivate an environment where our diverse global workforce can connect and thrive. Our Employee Resource Group program, Employee Recognition program, and 3D Gives Back program, are just a few examples of how you will be empowered to build connections, celebrate wins, and make a meaningful impact. What You Will Do Perform inspection tasks using various test instruments and equipment to measure values and verify functional operation of components. Determine product acceptability and recommend disposition of defective items according to established procedures. Generate Non-conformance Reports for products found outside specifications and communicate with quality/development. engineers regarding product and documentation defects. Complete all tasks accurately and on-time with meticulous attention to detail. Review and resolve documentation discrepancies with manufacturing/operations personnel to facilitate timely product release. Make final disposition decisions and prepare certificates of compliance/analysis based on comprehensive documentation review. Build quality into every aspect of the material release process by maintaining strict compliance with all quality requirements. Participate actively in continuous improvement initiatives, problem-solving, and professional development. Qualifications What You Will Bring Educational Requirements High School Diploma or GED required. Experience Required Previous experience in Quality Control, manufacturing, or production environment required Technical proficiency with precision measuring tools including calipers, micrometers, and pin gauges Working knowledge of Microsoft Word and Excel for documentation and data analysis Ability to work across multiple software platforms and systems Strong attention to detail with demonstrated ability to perform repetitive tasks with accuracy Capability to manage multiple tasks and competing priorities in a fast-paced environment Ability to work effectively both independently and in team settings Strong written and verbal communication skills for effectively documenting issues and communicating with engineers This position serves the Quality Control Group, which includes the need to review technical information from aerospace and defense customers. Preferred Experience Experience with Coordinate Measuring Machines (CMM) is a plus. Applications accepted online through January 30, 2026 #LI-MP1 3D Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, color, ethnicity, religion, sex, age, sexual orientation, genetic information, marital status, gender identity or national origin or because he or she is an individual with a disability or a disable veteran, Armed Forces service medal veteran (referred to collectively as "protected veterans"). The Company also provides applicants with equal employment opportunities without regard to pregnancy, childbirth, medical needs arising from pregnancy or childbirth, and related medical conditions including, but not limited to, lactation. Primary Location: US-CO-LittletonWork Locations: USA-CO-Littleton 80127Job Level: Entry LevelTravel: NoType of Position: EmployeeJob Posting: Jan 12, 2026, 4:07:29 PM

Job Description Inspection & Packaging Lead (3rd shift) This position reports directly to the Inspection and Packaging Supervisors as well as the VILP Manager. The role is responsible for general support of the Visual Inspection, Labeling, and Packaging of finished sterile compounds. The Lead is responsible for ensuring the accuracy for label reconciliation, document completeness and correctness of all product identification. Why Join Leiters Health? Are you passionate about making a real impact in the pharmaceutical industry? Do you thrive in a collaborative, innovative environment where your skills and ideas are valued? Look no further - Leiters Health is seeking talented individuals like you to join our dynamic team! At Leiters Health, we're not just another pharmaceutical company - we're pioneers in the field, dedicated to delivering high-quality compounded sterile products and outsourced solutions to healthcare providers nationwide. Our commitment to excellence and patient safety is at the core of everything we do. Innovative Culture: Be part of a forward-thinking company that encourages creativity, welcomes fresh ideas, and fosters an environment of continuous improvement. Meaningful Work: Contribute to a purpose-driven organization dedicated to providing critical medications and healthcare solutions that positivelyimpactpatients' lives. Professional Development: Access ongoing training, mentorship, and growth opportunities to expand your skills and advance your career within a rapidly growing industry. Cutting-EdgeTechnology: Work withstate-of-the-artfacilities and advanced technologies, staying ahead of the curve in pharmaceutical manufacturing. Collaborative Environment: Join a team of passionate individuals who are dedicated to teamwork, support, and mutual success, fostering a culture of inclusivity and collaboration. Who We're Looking For: We're seeking enthusiastic individuals who are driven, adaptable, and passionate about contributing to a mission-driven organization. Whether you're an experienced professional or just starting your career, Leiters Health provides an environment where your skills and talents will be recognized and appreciated. Sound like you? Apply today! Essential Functions: Lead and perform the line/area clearance of the visual inspection or label, and packaging activities. Review of batch record during and end of visual inspection, label, and packaging activities. Assist Inspection & Packaging Supervisors in overseeing employees who are responsible for visual inspection/labeling/packaging of finished goods. Collaborate with Inspection & Packaging Supervisors to ensure timely visual inspection and labeling of products to meet scheduled batch release dates. Ensure that training on SOPs and processes remains current. Analyze Production efficiencies downtime and waste. Lead teams to improve the results. Write investigations and CAPA actions for non-conformances in the department. Work with QA to quickly resolve any variance or document errors so that product may be released on time. Lead Problem Solving activities. Assist with maintaining batch and label inventory and managing daily staffing for visual inspection and labeling. Other duties as assigned. Supervisory Responsibilities: Lead a team of Associates, providing direction, support, and training. Provide a positive and collaborative work environment through effective communication and accountability, escalating conflict promptly and fairly. Experience and Necessary Skills: 1-year previous leadership experience or comparable experience preferred. Minimum 1 years' experience in aseptic processing preferred. Knowledge of cGMP guidelines/standards. Bachelor's degree or relevant experience preferred. Demonstrated written and oral communications skills including strong presentation skills. Excellent organizational skills and results oriented. Strong results orientation. Strong Microsoft Office skills are essential, proficient in the use of spreadsheets and word processing programs Ability to effectively bring others together and reconcile differences. Able to lift up to 50 lbs. and stand for extended periods when required Must pass an eye exam confirming 20/20 near vision corrected (with contacts or glasses) or uncorrected Must pass an eye exam confirming the ability to accurately perceive color Benefits: Smart healthcare coverage options that rewards wellness (and puts money back in your pocket!) Flexible Spending & Health Savings Accounts (FSA & HSA) available Dental & Vision insurance Employer Paid Life Insurance & Employee Assistance Program Short Term & Long-Term Disability Insurance Up to 4% 401K Matching (100% vested on day one!) Generous Paid Time Off Options - vacation,sick, paid leave and holidays! $5,250 Annual Tuition Reimbursement after 6 months $1,000 Referral Bonus Program with no limit Eligible for annual bonus program Timeline: We will be accepting applications on an ongoing basis until position is filled. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. *Please note that we do not work with third-party recruiters or agencies for this position. If you are a qualified candidate and wish to apply for this job, please do so directly through our official application process. We appreciate your understanding and cooperation in this matter. Monday - Friday 1130pm to 8am

Job Description Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)