Quality inspector jobs in Bowling Green, KY - 1,043 jobs

Primary Responsibilities In the role of CEI Inspector, you will be expected to: • Read, interpret, and understand construction drawings and specifications • Conduct and document observations of construction operations as work progresses • Perform material testing in the field and complete associated forms as required • Collaborate with other CEI Inspectors and Project Managers • Provide guidance to less-experienced field staff as needed • Perform other duties as needed Required Qualifications High school graduate or equivalent plus two (2) years' experience in construction inspection, one (1) year of which shall have been in roadway, bridge or signal/ITS construction inspection, or an Engineer Intern with a Civil Engineering degree seeking construction inspection experience. TDOT experience preferred. The following TDOT, or equivalent, technician certifications are desired but not required for employment: Asphalt Roadway Paving Inspector Asphalt Plant Technician Class 1 Concrete Technician Soils and Aggregate Technician Nuclear Gauge Training EPSC TDEC Level I OSHA 10 Safety Training Construction Guardrail Installation Training IMSA Work Zone Traffic Control IMSA Traffic Signal Inspector Experience with MS Office (Word, Excel, Outlook) Experience with SiteManager and LIMS preferred but not required. Strong written and communication skills Ability to work independently or as part of team. Must possess a valid driver's license Work Environment: 40 Hours plus per week Night-Work as required. Daily travel to and from project construction sites and meetings Work is outdoors in varying weather conditions. Corradino is an equal opportunity Employer Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

RK&K is seeking talented Senior Roadway and Bridge Inspectors to work in the Nashville area, with a focus in providing construction engineering inspection services on transportation projects for clients within the area. The Senior Inspectors should have 10+ years of experience working on DOT and/or other local agency construction programs and experience inspecting/managing CEI projects and supervising teams of Inspectors. Essential Function The ideal candidate for this position will work independently with multiple transportation clients and contractors while being responsible for: Work on various roadway and bridge projects within the region's geographic area Oversight of contractor's quality control operations Quality Assurance sampling and testing Completion of Daily Sampling and Testing Reports Data input in SiteManager/LIMS Daily communication with client, contractor, and field project personnel Required Skills and Experience High School diploma or equivalent 10+ years of prior experience providing Construction Engineering Inspection services Candidates must be trustworthy and responsible Must have a solid background in mathematics Understand how to read and follow test specifications Excellent driving record Experience supervising teams of Inspectors and/or Site Management experience Preferred Skills and Experience TDOT Asphalt Plant Technician TDOT Concrete Field Technician/ACI Grade 1 TDOT HMA Certified Roadway Inspector Aggregate Technician TDOT Concrete Plant Technician Nuclear Gauge Field Technician Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required. What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients' underwriting processes. EXL's consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. ************************************************** Job Description EXL Risk Control is looking for self-directed independent contractors who possess excellent communication skills, computer proficiency, and a commitment to meeting client quality and timeliness standards. You will work from your own home or office, and service onsite survey/inspection assignments in the Louisville, KY area, and other locations within approximately 100 miles of Louisville. Responsibilities You will be responsible for scheduling on-site surveys and providing risk control reports to insurance industry clients. These reports contain information necessary to underwrite a commercial insurance policy and may include recommendations to control and/or correct potential loss producing conditions associated with that policy. You will be expected to manage assignments you accept, successfully secure customer appointments within a local territory and complete work assignments on time. Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients. The type of businesses we survey are commercial operations, including retail, restaurants, hotels, apartments, construction jobsites, churches, schools, etc. Most surveys are focused on assessing the business for Property and General Liability coverage, but we also service other commercial insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability, Inland Marine and Builders Risk. Qualifications Preferred experience in commercial insurance, real estate, inspection, construction, claim, loss control, underwriting, and/or fire and safety experience is a plus, but all interested candidates are encouraged to submit their qualifications. In lieu of experience, we can refer you to a 15-hour online certification option to qualify you. Fees are negotiable depending on experience and the unique aspects of selected jobs. Tools or Items You Must Provide: Digital camera or tablet Computer Printer High speed internet access Reliable vehicle Measuring device such as a laser, 100 ft. tape, or measuring wheel Auto and General Liability Insurance All interested candidates are encouraged to apply.

Homestyle Direct (“HSD”) is an emerging and rapidly growing Food-as-Medicine home-delivered meal company dedicated to delivering high-quality, delicious, and healthy prepared meals to Medicaid and Medicare beneficiaries nationwide. The company was founded in 1997 in Twin Falls, ID, where it has grown substantially and is expected to exceed $50M in revenue and $10M in EBITDA in 2024. The Company produced and transported ~6 million meals in 2023. Meals are currently procured, warehoused, assembled, packaged, labeled, frozen, and shipped from the company's HQ in Twin Falls, ID. However, due to recent growth, HSD plans to expand operations by opening an additional facility in the Southeastern United States in 2024. The Quality Technician plays a vital role in monitoring and maintaining all aspects of product safety and quality that enhances the customer experience and our food safety adherence. As such, the Technician performs multiple checks on product in finished goods form and as product is processed to meet our internal standards for food safety and quality. Feedback to quality process owners (e.g. operations technicians and management) with immediate corrective actions implemented is the primary means of ensuring process quality and, subsequently, a high integrity product. Key Responsibilities: · Conduct regular quality monitoring checks to verify that all products meet customer and legal requirements. (i.e. weight control, seal monitoring, metal detection, meal configuration). · Daily temperature checks in the production cooler/freezer and shipping freezer. · Monitor chemicals used for cleaning and sanitation. · Support the receiving process by monitoring incoming raw materials, inspection of carriers and support inventory control. · Environmental Monitoring Program testing. · Ensure sanitation of the facility follows compliance with food safety requirements. · Monitor critical control point temperatures throughout the production process to ensure temperatures are meeting the standards outlined in the company's HACCP plan. · Monitoring use and highlighting for disposal of aging finished product or work in progress. · Collaborate with colleagues in Supply Chain, Operations, and Quality functions to continually improve capability and process efficiency. · Make decisions concerning product quality, including shutting down the line when processes do not conform to specifications. · Other duties - to help production when needed, cleaning, etc. Required Qualifications: · Attention to detail · Effective problem-solving skills · Accurate data and record keeping skills · Ability to multitask · Capable of leaning food safety and HACCP principles · Physical endurance and the ability to stand for long periods of time Preferred Characteristics: · Experience in Food Quality Assurance. · Commitment to quality, safety, and customer satisfaction. · Ability to thrive in a high-growth, mission-driven company. · Strong attention to detail and commitment to operational excellence. Homestyle Direct is an equal opportunity employer. We value diversity and are committed to creating an inclusive environment for all employees

Right of Way Inspector - Part Time - Lafayette, IN * 20 hours/week* Our team is filled with innovators, over achievers, and difference makers-hard working professionals who care about their work, their communities, and the lives of people around them. The positive, charismatic nature of the people behind SAFEbuilt fuels our commitment to keeping our communities strong and safely built. Join us and discover unbounded opportunities for a meaningful and rewarding career. We are currently seeking a talented and experienced Right of Way Inspector to join our team of professionals. This position offers great opportunity for dynamic, motivated self-starters to work on a variety of work assignments. You'll be a member of our highly respected team of professionals with a full complement of resources to support you and exciting projects to keep you challenged. JOB REQUIREMENTS: Daily communication with project team members, clients, and contractors Read/interpret project plans, drawings, and specifications Various inspections including underground utilities, road and/or bridge items and report discrepancies to Project Engineer Follow QA/QC practices/procedures Ensure work is compliant with plans, contractor submittals Measure, calculate, and determine quantities of assigned work and/or installed materials Ensure installed materials meet specifications and testing requirements Prepare Daily Inspector's Reports and review other reports SKILLS/KNOWLEDGE: Extensive knowledge of local building codes and current construction procedures/technology Must possess the ability to positively interact with the other staff members, the general public, contractors, governmental entities, and other clientele Excellent verbal and written communication skills Good time management, organization, and attention to detail skills Demonstrated ability to exercise initiative and a considerable amount of independent judgment Candidate must be able to handle multiple projects in a fast-paced atmosphere Candidate must stay familiar and up to date with different editions of the International Building Codes Strong computer skills including Microsoft Office. EDUCATION/CERTIFICATION/EXPERIENCE: * 5 years of experience with interpretation of codes in the field providing code compliant solutions preferred * ICC inspector certification preferred Inspections of public right-of-way and municipal projects Indiana Department of Transportation Standards ASTM Construction Standards Excavation and recompaction within the right-of-way Paving and concrete within the right-of-way Public utilities located underground within the right-of-way Reviewing construction documents and documenting discrepancies OSHA Regulations Storm water quality and erosion control COMPENSATION: SAFEbuilt pays competitive wages and has a 401K with matching More About SAFEbuilt: ********************* Our employees are our greatest asset, with exceptionally certified individuals in all departments, including Planning & Zoning, Code Enforcement, Fire Prevention, and Engineering, as well as full-service and supplemental Building Department services. SAFEbuilt invests in developing our employees, exploring innovative technology, and giving back to our communities. In partnership with over 1200 communities, our talented experts make a difference in the cities and towns where we live and work. Through quality people and consistent service, SAFEbuilt plays an important role in continually improving lives by developing safe, thriving communities. SAFEbuilt is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, gender identity, gender expression, age, disability, veteran status or any other protected factor. If you need assistance or an accommodation due to a disability, please contact us at ****************** or you may call us directly on ************.

Winnebago Industries is a leading manufacturer of outdoor lifestyle products under the iconic Winnebago, Grand Design, Chris-Craft, Newmar, and Barletta Boats brands. Our 6,500+ team members across Iowa, Indiana, Minnesota, and Florida deliver on our vision to be the trusted leader in outdoor lifestyle solutions by providing unmatched innovation, quality, and service in the industries we engage. We believe our employees are our most valuable asset, and we are committed to providing a safe and engaging environment where you can be passionate about the work you do and have opportunities to learn and grow. Winnebago is excited to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information, or any other protected characteristic under applicable law. Winnebago Industries, Inc. has an immediate need for an experienced candidate to fill a Quality Control position. This position will be based in Middlebury, Indiana. Responsibilities Inspection of both inside and outside of the unit, for any electrical, functional, or fit and finish defects and ensure trailers meet RVIA and Winnebago quality standards. Examine installation of mechanical equipment, plumbing lines and tanks, and brackets in subassemblies and trailer structures to verify location and fastening. Responsible for performing required system tests outlined by NFPA 1192 Identify surface defects, such as scratches and cracks. Verify that all graphics are installed and in correct location. Examine installation of wall coverings and upholstery to verify color, quality, and fit of material. Write inspection reports. Assist to resolve day-to-day inspection problems having to do with inspection methods and devices utilized. Correction of deviations and malfunctions. Verify acceptable quality and communicate reasons for rejects and malfunctions. Test mechanical, plumbing and electrical systems for functionality, weigh/tag units. Winterize units when required. Communicate with Group Leaders regarding quality of units. Complete any necessary paperwork and close out units when complete. Any other duties as assigned to promote corporate goals. Knowledge & skills High School Diploma Prior RV QC experience preferred Able to use Basic Hand Tools Strong Verbal Communication Skills Must have strong organization and communication skills. Ability to work effectively in a team environment, while maintaining individual goals. Ability to effectively handle multiple tasks and priorities. Physical Demands Ability to stand in one place for long periods of time. Ability to climb up and down ladders/stair steps repeatedly, and bend Use of hand and arms to reach, grasp, and manipulate objects. Lift objects up to 25 pounds occasionally. Ability to work on a computer monitor for short periods of time. Regular attendance is required and is essential for this position. Work is completed on the production floor; may be exposed to noise, and air pollutants, etc. At Winnebago, we believe ALL people are leaders and hold each other accountable to high expectations. Leadership Expectations : Connect with Purpose Be inclusive; seek out different perspectives. Focus on the Customer; put yourself in the customer's shoes. Communicate Clearly; say what needs to be said and listen. Execute with Excellence Explore Possibilities; ask, "What if?" and embrace new ideas. Set Direction; prioritize, plan, and align; balance thinking and action. Drive Results; get the right things done; work with a sense of urgency. Build the Future Transform the Road Ahead; anticipate opportunities; seek new opportunities for continuous improvement. Navigate Change; be agile and flexible; take on new challenges. Inspire Growth; help each other improve; commit to personal development. If you are the right candidate for this position, as a Winnebago Team Member you will be eligible for the following benefits: Medical, Dental, Vision, Group Life Insurance, Accidental Injury, Critical Illness, Short & Long-Term Disability Health Savings Account (HSA) Flexible Spending Account (FSA) 401(k) with match Employee Stock Purchase Program Tuition Reimbursement Holiday and Vacation Pay Winnebago Towables is an E qual O pportunity E mployer.

Are you looking for your forever career? Do you strive for success? Come join our Pan-Oston family and enjoy a great working experience with us! Pan-Oston Company is an industry leader in providing metal and wood fixtures to some of retails largest members and is a Houchens Industries Employee-Owned Company - when the company does well, the employees do too! What We Offer: ESOP Retirement (Entirely employer funded retirement) Competitive health insurance prices Employer paid Dental and Vision Insurance Multiple wage progressions over 18 months Opportunities for growth Employer provided group Short and Long Term Disability Employer provided Life and AD&D Insurance Pan-Oston is seeking high-potential, highly motivated and skilled team players to join our team! We have an immediate opening for the following position: QUALITY INSPECTOR (2ND SHIFT) PURPOSE OF POSITION: The Quality Inspector is an entry-level position responsible for performing basic product and process inspections to ensure conformance with company quality standards and customer requirements. This role supports manufacturing operations through inspection, documentation, and a strong willingness to learn quality processes and tools on the job. RESPONSIBILITY AND AUTHORITY: Perform in-process, incoming, and final inspections under established procedures and guidance. Identify and report product or process non-conformances. Support manufacturing and quality teams by providing inspection feedback. Follow documented quality system procedures and work instructions. Escalate quality concerns to the Quality Manager or designated lead as needed. ESSENTIAL FUNCTIONS OF THE POSITION: Inspection and Testing Perform routine inspections on products, components, and materials. Use basic measuring and inspection tools (training provided). Documentation Accurately record inspection results and findings. Complete inspection checklists and reports as required. Compliance Follow established quality control procedures and safety guidelines. Ensure inspected products meet defined specifications. Problem Identification Identify defects or non-conformances and communicate findings promptly. Work with production personnel to support issue resolution. Learning and Development Participate in on-the-job training related to quality inspection methods. Demonstrate a willingness to learn new processes, tools, and quality concepts. Qualifications MINIMUM POSITION REQUIREMENTS (Skills & Abilities) Education High school diploma or equivalent required. Experience Entry-level position; prior quality or manufacturing experience is helpful but not required. Skills & Abilities Strong attention to detail. Willingness and eagerness to learn quality inspection processes. Basic communication skills, written and verbal. Ability to follow instructions and work procedures. Ability to work independently and as part of a team. WHAT ADDITIONAL SKILLS OR ABILITIES WOULD BE HELPFUL FOR THE JOB? Basic computer skills. Positive attitude and strong work ethic. Dependability and good attendance. Effective interpersonal skills.

Under Quality supervision, independently evaluates materials, components, subassemblies, and finished medical devices to ensure conformance to engineering drawings, specifications, and approved procedures. The Quality Control Inspector III serves as a technical subject-matter expert for inspection methods, drawing interpretation, GD&T, and quality system requirements. This role supports advanced inspections, nonconformance disposition activities, and provides technical guidance to lower-level inspectors. ESSENTIAL DUTIES AND RESPONSIBILITIES Perform advanced Quality Control inspections per ATEC procedures with minimal oversight Independently interpret and apply complex engineering drawings, specifications, and GD&T (Geometric Dimensioning & Tolerancing) Execute dimensional, visual, functional, and cosmetic inspections using advanced metrology equipment (Micro-Vu, vision systems, optical comparators, height gages, hand tools, etc.) Perform and review First Article Inspections (FAI), in-process inspections, and final release inspections Provide technical support and mentoring to QC Inspector I and II personnel regarding inspection techniques, acceptance criteria, and documentation requirements Identify and document nonconforming material in accordance with established procedures; support Nonconformance Record (NCR) activities as required Generate, review, and approve quality records including inspection records, nonconformance reports, deviations, scrap documentation, and rework verifications Ensure inspection records meet Good Documentation Practices (GDP), traceability, and audit readiness requirements Perform ERP (SAP) transactions required for inspection, material status changes, and product release Interface with Manufacturing, Engineering, Purchasing, Shipping/Receiving, and Supplier Quality to resolve inspection and quality issues Support root cause investigations, corrective actions, and continuous improvement initiatives related to inspection processes and product quality Assist and support internal, external, and regulatory audits as a technical inspection representative Identify opportunities to improve inspection efficiency, risk-based inspection strategies, and measurement system effectiveness Read, understand, and comply with all company policies, procedures, and quality system requirements Other duties as assigned Requirements The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Strong communication skills, both verbal and written Strong organization skills and attention to detail Intermediate math and computer skills required Firm understanding of 21 CFR (Code of Federal Regulations), Part 820, ISO 13485, Good Documentation Practices (GDP) Firm understanding of ASTM (Association of Systems & Test Methods) standards and Heat Treat conditions per ASTM standards Experience in a controlled or regulated environment required Inspection experience with Optical Comparators, Vision Systems, hand tools, and other calibrated gauges Education and/or Experience High School Diploma or equivalent 4-12 years of experience working in a manufacturing or medical device industry preferred. Familiarity with quality concepts such as visual inspection and defect identification. For roles based in the United States that require access to hospital facilities, must be eligible for and maintain credentials at all required hospitals, including meeting any applicable physical requirements or vaccination requirements (including the COVID-19 vaccine, as applicable). ATEC is committed to providing equal employment opportunities to its employees and applicants without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender expression, or any other protected status in accordance with all applicable federal, state or local laws. Further, ATEC will make reasonable accommodations that are necessary to comply with disability discrimination laws. Salary Range Alphatec Spine, Inc. complies with state and federal wage and hour laws and compensation depends upon candidate's qualifications, education, skill set, years of experience, and internal equity. $26- $30 an hour full-time salary range. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Free Food & Snacks Wellness Resources Stock Option Plan

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. Position Summary: The Quality Control Inspector is responsible for verifying product quality, conducting inspections and tests, and documenting results to ensure compliance with internal and external requirements. This role actively participates in problem-solving, root cause analysis, and continuous improvement efforts across the organization. Role Responsibilities: * Perform inspections and testing of products to ensure compliance with specifications and quality standards. * Read and interpret blueprints, engineering drawings, and bills of materials. * Document inspection results, including Certificates of Conformance and other quality records. * Investigate customer complaints and product returns, and implement containment measures. * Participate in root cause analysis and develop corrective and preventive actions. * Calibrate and maintain standard measuring equipment (gauges, calipers, tooling). * Support the Production Part Approval Process (PPAP) and ISO 9001 requirements. * Resolve nonconforming material using company resources and procedures. * Collaborate with production, engineering, and management to drive continuous improvement. * Adhere to all EHS and PPE policies while maintaining a safe and positive work environment. Minimum Qualifications: * High school diploma or GED with at least 1 year of quality control experience. * Knowledge of ISO 9001 or similar quality standards and quality techniques (e.g., SPC, PPAP). * Strong communication skills and proficiency with Microsoft Office. * Ability to work independently and in a fast-paced, team-oriented environment, including off-shifts or extended hours as needed. Preferred Qualifications: * Associate's degree or technical certification in quality, manufacturing, or related field. * 2+ years of quality control experience in a manufacturing environment. * Experience with ISO 9001 audits, SPC, PPAP, and root cause analysis. * Proficient with dimensional measurement tools, calibration, and interpreting blueprints. * Strong problem-solving skills with ability to support continuous improvement in a fast-paced environment. Immigration Sponsorship Not Available: * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. * International relocation or remote work arrangements outside of the U.S. will not be considered. Keywords: Quality Assurance, Inspection, ISO9001 Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Job Description Purpose and objectives of the function The purpose of the function is to oversee Quality Inspectors, spot check floor quality throughout the facility, and complete required reports. Identifying nonconforming material and notifying Supervisors/Managers. Assist Procurement with inspection of 1st run items from suppliers. Purpose and objectives of the position Ensure compliance with the engineering drawings to production. Work with QA Process Engineer for overall Quality. Responsibility Spot check production runs throughout the facility. Assist with incoming inspections of purchased material. Assist QA Process Engineer with Spanish process translations. Log audit findings Assist with ISO training as needed Make sure POKE-YOKE is in place where required Assist with calibration of tools Review nonconforming area weekly Verify 1st piece and periodic checks are being completed Inspection of 1st piece pre-pros from suppliers Pass or fail samples and notify Procurement of findings. Assist with local supplier checks Powered by ExactHire:191326

The Quality Inspector evaluates statistical data to determine and maintain quality and reliability of products for our Greenwood, IN facility on a 1st shift schedule. What You'll Do: Perform first article inspection which includes detailed documentation using customer's forms. Work with minimal supervision using detailed procedures, forms and manuals as a guide to job performance. In process auditing that will require the review of operator and process performance working to specifications as referred to in material routings. Use control plans, Material routing instructions, computer print outs, and Pareto charts. Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards. Tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics Records test data, applying statistical quality control procedures. Other duties and responsibilities may be assigned as needed. What You'll Need: High school diploma or general education degree (GED) and 5 years related experience and/or training; or equivalent combination of education and experience. Ability to read and interpret complex blueprints and drawings. Ability to perform basic math. Have ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. The Quality Inspector evaluates statistical data to determine and maintain quality and reliability of products.

Temp To Full-Time Start Strong as a Quality Inspector What's In It for You TA Staffing is where stable work meets growth potential and everyday wins. Steady, Weekly Pay: Get rewarded on your schedule. Comprehensive Benefits: Health, dental, vision, life insurance, and paid time off. Growth Opportunities: Training to develop key leadership skills Team Bonuses: Celebrate shared success through referral and performance rewards. Smooth Onboarding: Direct deposit from day one-no waiting, no hassles. Temp to Hire Your Impact As a Quality Inspector, you ensure every product meets the highest standards before it heads out the door. Your attention to detail supports quality, safety, and customer satisfaction-making you a key player in every shift. What You'll Do Check products carefully for quality and accuracy Use simple tools to measure, test, and track results Flag anything off-spec and help fix issues fast Keep clear records to support audits and reviews Team up with coworkers to meet daily quality goals Follow all safety procedures and inspection rules Who You Are Sharp-eyed with a focus on the details Reliable and open to learning new skills Comfortable working on your feet and lifting when needed Flexible with shifts and always on time No experience needed-just bring your work ethic! Ready to Apply? TA Staffing is hiring now for all shifts. Join a team that values precision, teamwork, and your potential. 0.00 Qualifications 1 year

A confidential aerospace manufacturer is seeking a Production Quality Inspector to ensure the highest standards of quality and compliance in advanced manufacturing operations. In this role, you will perform inspections on structural assemblies, components, and systems that support critical aerospace and defense programs. This is an onsite position requiring U.S. citizenship or permanent resident status in alignment with federal contract requirements. Key Responsibilities Perform in -process and final inspections to verify products meet engineering drawings and specifications. Validate assembly completion and support production teams with quality checks throughout the build process. Identify defects in surfaces, fasteners, coatings, and systems; document and communicate corrective actions. Compile inspection data, reports, and deviation records for Material Review Board review. Monitor and manage non -conforming materials according to established procedures. Support tooling validation, metrology, and standardized work practices. Maintain a clean, safe, and compliant work environment. Required Qualifications High school diploma or GED required (Associate degree or technical training preferred). Minimum 2 years of quality inspection experience in structural or manufacturing environments, OR equivalent education. VantageClear credential (or equivalent) Ability to read and interpret engineering drawings and specifications. Strong communication and teamwork skills. Must be physically able to perform inspections (standing, climbing, bending, lifting up to 50 lbs). Preferred Qualifications Quality inspection experience in aerospace, automotive, or defense manufacturing. Knowledge of ISO/AS9100 standards and structured quality systems. Familiarity with BACS and other industry specifications. Proficiency with inspection tools, measuring devices, and computer -based reporting.

Imagine your career taking you to the depths of innovation and the heights of impact. Our people enable continuous progress. Their commitment, collective expertise, and unique capabilities are the engine room behind SBM Offshore's True. Blue. Transition. - shaping the future of energy, and beyond. About Us: SBM Offshore is the world's deepwater ocean-infrastructure expert. Our work is already resulting in cleaner, more efficient energy production. True. Blue. Transition. is our promise to enable that into the future while at the same time using our expertise to support new and existing markets in the blue economy. It starts with Advancing our Core: continuing to advance the decarbonization of traditional energy production. While Pioneering More: helping to enable the energy transition and using our unique capabilities in ocean infrastructure to support more industries to grow sustainably. Sharing our experience for a better blue tomorrow. Purpose * As Lead Inspection Coordinator, you lead activities to ensure that all equipment, materials, and processes meet industry standards and regulatory requirements. This involves planning, coordinating, and overseeing inspection activities to ensure compliance and safety. Responsibilities * · Inspection Planning: You develop and lead the implementation of inspection plans and schedules based on project requirements and regulatory standards. * · Coordination: You manage the coordination with internal teams, third-party inspectors, and regulatory bodies to facilitate inspection activities. * · Documentation: You maintain and lead the maintenance of comprehensive records of inspection reports, certificates, and non-conformance reports. * · Compliance Monitoring: You ensure all inspections comply with industry standards, company policies, projects requirements and regulatory requirements. * · Issue Resolution: You lead the identification, documentation, and facilitation of the resolution of non-conformances or quality issues. * · Communication: You provide regular updates to the project management team, quality assurance teams, and other stakeholders on inspection status and findings. * · Vendor Liaison: You work with suppliers and contractors to ensure their inspection processes meet project standards. * · Training: You conduct training sessions to the inspection teams on inspection protocols and quality standards' project specifics. * · Mentoring: you mentor and monitor the inspection coordinators' team and support their activities as needed. Education * Bachelor's degree in engineering, quality management, or a related technical field, along with relevant certifications in inspection or quality assurance. Experience * · Proven track-record in leading inspection coordination activities in the oil and gas or similar industry. * · Strong knowledge of industry standards and regulatory requirements. * · Excellent organizational and time-management skills. * · Excellent communication and interpersonal abilities. * · Knowledge of inspection management software and Microsoft Office Suite. * · Attention to detail and problem-solving skills. * · Ability to work under pressure and meet tight deadlines. Functional Competencies Expediting Analytics and reporting Quality Control Plans Regulatory Management Inspection, testing, commissioning and monitoring SBM Product Knowledge Purchasing Tools and Processes Package Management Third parties relation management GENERAL INFORMATION SBM Offshore N.V. is a listed holding company that is headquartered in Amsterdam. It holds direct and indirect interests in other companies that collectively with SBM Offshore N.V. form the SBM Offshore Group ("the Company"). For further information, please visit our website at ******************** The companies in which SBM Offshore N.V., directly and indirectly, owns investments are separate entities. SBM Offshore is proud to be an Equal Employment Opportunity and Affirmative Action employer. SBM Offshore does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job Description We're looking to hire Quality Line Reference Technicians for our Fishers, Indiana site! Responsibilities: Perform in-process, visual, dimensional, functional, and packaging controls according to the control plan of the manufactured product Be the reference key-person for product quality within the shift with reference to the production lines to which they are dedicated Cooperate with the QC laboratory for the evaluation of the defects Monitor production lines status in coordination with the other functions, recording the control results and the other required information, Guarantee a high level of cleaning and tidiness of the work areas Initiate deviations and OOS and participate in the investigations and solving activities for the non-conformities that occur during the shift Support personnel training activities Qualifications: Basic computer application knowledge Prior experience in manufacturing or quality control Knowledge of device manufacturing/pharma Quality Management System processes and features Experience in healthcare device/pharma manufacturing environment. International travel may be required, based on business needs Ability to work weekends Stevanato Group is an Equal Employment Opportunity (EEO) employer. We believe that a diverse workforce is key to our success. We welcome applications from all members of society irrespective of age, sex, disability, sexual orientation, race, religion or belief It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Retirement plan Vision insurance Schedule: 8 hour shift Experience: performing quality control test: 3 years (Required) healthcare environment (medical device or phrama): 3 years (Required) visually inspected products: 3 years (Required) Quality inspection: 3 years (Required) Work Location: In person

Decatur Diamond, LLC, a manufacturer of diamond based tooling is seeking an Inspector to join our Qualify Control Department for our production facility located in Decatur, IN. The hours for this position will be 8:30 AM - 5:00 PM, Monday through Friday. The candidate will be responsible for final inspection of all parts. Must also perform calibration of inspection, measuring and testing equipment. Applicant must possess skills with Microsoft Office products (Outlook, Excel and Word). Applicant also should be proficient in the use of inspection equipment. The ideal candidate will be mechanically inclined or have past Quality Control experience. Trade school or prior machining experience is preferred. We will train the right individual . Decatur Diamond offers an excellent benefit package, including medical, dental, vision, 401(k) with both a base and matching contribution, paid holidays/PTO, long-term/short-term disability and life insurance. Responsibilities for Quality Control Inspector Performing final inspection of parts according to established inspection criteria. Calibration of inspection, measuring and testing equipment Performing manual inspections correctly and accurately Proficient use of computer driven and automated inspection equipment Compliance with all safety and health regulations Qualifications for Quality Control Inspector High School Diploma or GED Basic knowledge of Inspection procedures including: prints/drawings, critical dimension and tolerances. Basic knowledge of manual inspection equipment: micrometers, calipers, comparators Proficient in reading drawings, prints and understanding inspection criteria Computer proficiency in Microsoft Outlook, Excel and Word Detailed- oriented with a good work ethic Possess good basic math skills Takes pride in assisting with the production of high quality American-made products Ability to follow written and oral instructions Ability to work in a team

Contour Airlines is a long-established aviation services company with a diverse range of capabilities. At Contour Airlines, our core values guide every action and decision. We are unwavering in our commitment to integrity and safety, which remain at the heart of all our business lines. Our team members exemplify an attitude of excellence, consistently striving to think like a customer. We believe there is strength in unity, and we work together as a team to achieve ambitious goals. Full-Time Employee Benefits & Compensation Overview As a full-time employee of Contour Airlines, you are eligible for the following benefits and programs: Group Insurance Plans Health, Vision, and Dental Coverage-Effective the first day of the month following your hire date. Additional voluntary benefits include short-term/long-term disability and life insurance policies. Eligibility begins the first day of the month following your hire date. 401(k) Savings Plan Eligibility begins the first day of the month following your hire date. The Company offers a matching contribution up to 6% of your eligible compensation. Enrollment guidelines and a 401(k) Enrollment Guide will be provided during onboarding. Paid Sick Leave Accrual of up to 56 hours of paid sick leave per year. Unused sick leave rolls over annually until your sick bank reaches 480 hours. Vested Vacation Hours Eligible to receive vacation hours on January 1st following your hire date. These hours will be vested and available for use in accordance with Company policies. Non-Revenue/Space Available (NRSA) Travel Privileges NRSA (non-revenue/space available) travel privileges on Contour Airlines upon hire and access to MyID Travel after 6 months of service Leaves of Absence Eligible for various types of leave, including: Medical Leave Non-Medical Family Care Leave Maternity and Paternity Leave Personal Leave Detailed leave policies are outlined in the Contour Airlines Employee Handbook, which will be provided during onboarding. Compensation Details Pay Rate: starting hourly rate is between $27.00 and $37.00 per hour based on your prior work experience. You will also receive an additional $1.00 override for working the nightshift. Step Pay Increases: Eligible for a $1.00 increase each year on your pay anniversary date, up to a maximum rate of $42.00 per hour. Retention Bonus: After reaching the top of the pay scale, eligible for an annual retention bonus of up to $2,000.00 based on performance. Overtime Pay: Hours worked in excess of 40 per week will be paid at 1.5 times your hourly rate. Holiday Pay: Work performed on Contour Airlines' observed holidays will be compensated at 2 times your hourly rate. A list of Company-recognized holidays is outlined in the Employee Handbook. Equal Employment Opportunity Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Accommodations Contour Airlines is committed to providing reasonable accommodations to applicants and employees. If you require accommodations during the application or onboarding process, please contact Human Resources at *****************. Join Our Growing Team Contour Airlines' rapid growth has created exciting career opportunities. We invite you to become part of our family and contribute to our ongoing success. Position Summary The Quality Control - Aircraft Inspector is responsible for ensuring all aircraft maintenance, inspections, repairs, and documentation are carried out in strict compliance with FAA regulations, manufacturer's specifications, customer requirements, and Company standards. This role is critical to maintaining the highest levels of airworthiness, safety, and operational reliability. Essential Duties & Responsibilities Perform incoming, in-progress, and final inspections of aircraft, components, and articles maintained by the Company. Monitor workmanship and materials to ensure compliance with FAA regulations, manufacturer guidelines, and Company procedures. Verify that all required maintenance and inspection documentation is completed accurately and in compliance with regulations. Oversee proper use of tools, equipment, and safety procedures, ensuring compliance with OSHA, EPA, and other regulatory requirements. Confirm that all maintenance work meets FAA, customer, Company, and manufacturer standards of quality. Complete inspection records in accordance with the Repair Station Manual / Quality Control Manual and applicable customer guidelines. Conduct surveillance of maintenance practices, storage areas, shops, and housekeeping standards, initiating corrective actions as required. Provide constructive feedback to improve efficiency, productivity, quality, and safety. Assist Crew Chiefs and Supervisors in determining the scope of required repairs. Perform weight and balance procedures. Release aircraft or components back into service following approved inspections. Participate in special projects or other duties as assigned by leadership. Qualifications Minimum 23 years of age. Valid driver's license with a good driving record. FAA Airframe and Powerplant (A&P) Certificate required. Part 65 Certification and minimum 2 years of aviation experience. 18-months minimum experience with Embraer Regional Jet 135/145 (ERJ) and/or Bombardier CRJ200 (CRJ) required. High school diploma or GED required; advanced training preferred. Must be legally authorized to work in the U.S. and able to travel internationally. Able to pass a 10-year work history review, criminal background check, and DOT pre-employment drug screening. Must submit to and pass FAA- and Company-mandated random drug and alcohol testing. Proficiency in English (reading, writing, speaking); Spanish proficiency is a plus. Must be familiar with FAR Part 135 and Part 145 operations, inspection methods, techniques, and tools. Must be proficient with inspection equipment and visual aids appropriate to the task. Completion of Quality Inspection training required. Knowledge, Skills & Abilities Strong knowledge of FAA regulations, maintenance procedures, and safety standards. Ability to work in a fast-paced environment with shifting priorities. Strong organizational skills with attention to detail. Excellent written and verbal communication skills delivered with professionalism. Ability to work independently and as part of a team. Strong interpersonal skills with the ability to interact with diverse personalities. Demonstrated ability to lead, mentor, and support others. Ability to manage multiple complex projects simultaneously. Self-motivated with a commitment to excellence and continuous improvement. Work Schedule & Environment Nightshift position: 4:00 PM - 2:30 AM, including weekends and holidays. Must be able to work flexible hours as operational needs require. Work is performed in a hangar and ramp environment with exposure to noise, weather, and aircraft operations. Must be able to work in a safe, professional manner while adhering to all regulatory requirements, including OSHA, EPA, state, and federal guidelines. Disclaimer: The above statements are intended only to describe the general nature and level of work required of the referenced position; they are not intended to be an exhaustive list of all responsibilities, duties, and skills required of individuals in the position. Please be advised that the duties and expectations of this position may be subject to change.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. Apply technical knowledge and expertise in determining proper equipment installation and operation. Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data. Review and approve locally developed procedures and solutions to complex repair situations. Perform analysis of defects and interprets quality control rejection and failure trends. Monitor safety, training, and certification requirements. Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. Maintain Quality, Safety, Training and Certification Records. Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. Inspect forms and records related to aircraft maintenance. The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Comply with work order timekeeping system procedures. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. Maintain situational awareness, stay cognitive-focused, and mitigate risks. Comply with processes and procedures as per DHS/DOD documents and publications. Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. Perform weekly break room and smoking area cleaning duties. Perform other duties as assigned. Minimum Requirements: Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent is required. Five (5) years of experience in aircraft maintenance. Valid Airframe and Power Plant (A&P) License required. Valid FAA Inspection Authorization (IA) required. Ability to obtain a government flight line driver's license. Possess a valid United States driver's license. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Ability to read and interpret data is required. Ability to read, write, speak and understand English. Physical Requirements/Working Environment: Capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. May be required to work night shifts. May work in Aircraft maintenance hangar or outside. Some domestic travel may be required Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.