Quality inspector jobs in California - 1,103 jobs

RESPONSIBILITIES: Responsibilities may include some or all of the following: Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION Perform semi-complex inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish. Adapt and develop inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture. Determine acceptance or rejection after inspecting parts, tools, instruments or x-ray film. Identify causes of defective conditions and test failures and prepare all appropriate documentation. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary. CALIBRATION Perform calibration on various types of semi-complex measuring and test equipment. Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions or related documents. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired equipment. NONDESTRUCTIVE TEST Perform daily, weekly and monthly equipment and material checks. Perform pre-inspection and post-inspection cleaning. Set-up equipment and conduct tests of a semi-complex scope. Perform complete inspections in accordance with the applicable specifications, standards and other contractual documents. Interpret, evaluate and document inspection results in accordance with approved procedures. Observe all prescribed safety rules and regulations and maintain a FOD free work area. Perform other related responsibilities. Job Requirements: ⦁ Three years related inspection, calibration, or NDT experience or demonstrated ability to perform described responsibilities. ⦁ May be required to be certified as a Level II Nondestructive Test Inspector in two or more disciplines. ⦁ Certification must be in accordance with MIL-STD-410 and PES1-29. ⦁ Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. ⦁ Knowledge of applicable military standards or specifications required. ⦁ Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Possess working knowledge of shop mathematics including trigonometry.

Job Posting Start Date 01-20-2026 Job Posting End Date 04-03-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Quality Assurance Manager, is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Strong analytical, problem-solving, detail-oriented skills Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: The CMM Quality Inspector by using the Gill Process Documents (i.e.: GPS, GMS, GOS), performs essential duties to meet customer and AS9100 requirements and supports engineers with complex tasks. This position also works on quality-related projects with direction from the Quality Control Manager. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follow company policies and procedures Comprehend and ensure compliance with internal quality documents, and customer specifications Read and understand customer specifications, process standards, drawings (blue prints), ANSI procedures, and industry standards. Coordinate with CNC production to inspect and rework parts in a timely matter. Must be able to setup, program, and operate Coordinate Measuring Machines, both traditional in-place and articulated-arm (Romer) devices. Proficient in reading blueprints, understanding GD&T, and working with associated technical documents. Proficient in the selection of appropriate hand-held and/or surface plate measuring equipment appropriate to the task. Comfortable providing instruction for the development of Inspection employees within the organization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education (Required) Functionally capable in the use of Microsoft Office and other basic computer software. Ability to comfortably multitask with minimal supervision. Ability to effectively communicate verbally and in writing Acceptable Vision Test results Hexagon Metrology coordinate measuring machine level 1 Working knowledge of PC-DMIS software ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

About Applied Aerospace: Join the team that builds for the best. At Applied Aerospace, we design, fabricate, and test mission-critical aerospace components for leading innovators like SpaceX, NASA, Northrop Grumman, and Boeing. Every part we create reflects our relentless commitment to quality, reliability, and performance. Through precision engineering and purpose-driven innovation, we're helping take aerospace technology to new heights - and we're looking for talented individuals who want to be part of that journey. OVERVIEW OF POSITION: Our company is currently seeking a dedicated and detail-oriented Quality Inspector to join our team. As a Quality Inspector, you will be responsible for conducting in-process inspections using hand inspection tools such as micrometers, calipers, height gauges, and other measurement equipment. Your primary role will be to ensure that our products meet the highest quality standards before they move forward in the production process. ESSENTIAL JOB FUNCTIONS: * Perform in-process inspections using various hand inspection tools, including micrometers, calipers, height gauges, etc. * Follow work instructions and inspection guidelines to accurately assess product quality. * Pay meticulous attention to detail, identifying any defects, deviations, or non-conformances during inspections. * Read and interpret Mylar's and blueprints to verify product dimensions and specifications. * Collaborate with production teams to address and resolve any quality issues that may arise. * Assist in reporting non-conformances and documenting inspection results accurately. * Continuously learn and adapt to new inspection techniques, tools, and technologies. * Maintain a clean and organized work area. * Perform thorough examinations of all materials and finished products. * Implement and improve quality control operating procedures. * Identify and troubleshoot equipment problems and defects. * Other job duties as assigned. GENERAL: * Associate level should have 2-5 years' experience in Quality. * General level should have a total of 5+ years' experience in Quality. * Senior level should have a total of 10+ years' experience in Quality. * High school diploma or equivalent. * Proven experience as a Quality Inspector or in a similar role, preferably in a manufacturing environment. * Proficient in using hand inspection tools such as micrometers, calipers, height gauges, and other measurement equipment. * Excellent attention to detail and ability to identify defects and non-conformances. * Strong communication skills and ability to collaborate effectively with cross-functional teams. * Familiarity with quality control processes and standards. * Basic computer skills for documenting inspection results. * Ability to work independently and prioritize tasks effectively. * Willingness to learn and adapt to new technologies and inspection methods * Strong attention to detail. * Strong analytical and critical thinking skills. * Excellent written and verbal communication skills. * Previous experience in a manufacturing or production environment. * Knowledge of quality management systems. * Familiarity with ISO standards. * Ability to read and interpret Mylar's and blueprints. * Experience with non-conformance reporting. This job description is not intended to be all-inclusive. Employees may perform other related duties as assigned to meet the ongoing needs of the Company. Applied Aerospace is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Applied Aerospace is committed to working with and providing reasonable accommodation to individuals with disabilities or individuals who may need religious or medical accommodation. If you need accommodation because of a disability, medical, or religious reason for any part of the employment process you can notify the Human Resources Department, and your request will be reviewed.

Take Your Construction Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Construction Services team is looking for you! From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Step into Your New Role Kleinfelder Construction Services is seeking an experienced Lead Roadway Inspector to perform quality assurance inspection services on transportation-related road and highway improvement projects in the Inland Empire. The Lead Roadway Inspector will be assigned a field vehicle and gas card, reporting to a construction job site(s), with the ability to work extended shifts and nights as needed. The initial assignment is for a bus rapid transit project in Ontario. Job Duties * Lead a team of field inspectors coordinating inspection between multiple jurisdictions and municipalities * Perform quality assurance inspection and documentation of civil (roadway) construction activities under the direction of a Resident Engineer * Coordinate construction activities with various property/business owners within the proximity to the project; provides verification of adherence to temporary construction easements * Issue field directives to the Contractor; attend weekly construction meetings; coordination of the construction schedule and notifications with the public outreach team * Coordinate Quality Assurance materials sampling and testing * Verify the implementation of the Contractor's Quality Control Program and adherence to plans and specifications * Prepare detailed Daily Inspection Reports, with photos, accurately reflecting the construction progress * Measure, calculate, track, and record pay quantities for monthly estimates * Assist in maintaining, supporting, and promoting a safe work environment while complying with applicable safety rules, policies, and procedures * Maintain a set of field as-built drawings * Assist the Resident Engineer with field input on change orders, RFIs, submittals and response letters to the contractor, and as-built drawings Qualifications/Skills * High school diploma or equivalent. Associate degree preferred. * Minimum of ten (10) years of demonstrated experience in roadway construction inspection of highways or major public works projects including traffic control, PCC and AC paving, earthwork, grading, drainage, and signing and striping * Knowledge and experience with equipment used in construction inspection, surveying and field testing of construction materials. * Knowledge and experience with principles of effective communication and supervision * Able to work independently, make effective decisions concerning construction work in progress and solve field problems * Able to direct the efforts of subordinate inspectors Additional Preferred Qualifications 1) BS degree in Civil Engineering and/or EIT 2) Caltrans inspection experience 3) Proficient in the use of Microsoft Office programs 4) Knowledge of Caltrans standard plans, specifications, procedures, and Construction Manual 5) Ability to assist the Resident Engineer in all aspects of required field and office construction engineering work including, but not limited to the following: * Experience in the inspection of traffic control system compliance * Experience in Water Pollution Control Program (Storm Water Pollution Prevention Plan) enforcement * Knowledge and experience with equipment used in construction inspection, surveying, field testing of construction materials, and construction office engineering * Knowledge of computers, computer applications, and computer software programs such as Microsoft Office (Word, Excel, PowerPoint, and others) * Knowledge and experience with principles of effective communication and supervision * Ability to work night shifts for an extended duration Move Forward with Kleinfelder Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 110 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver. Progress with an Employer that Values You Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. Salary range: $34.73 - 57.96/hr. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder. #LI-SF1

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview Under the direction of the Task Order Manager, the Quality Control Inspector is responsible for conducting inspections to ensure compliance with contract requirements and Quality Control and Safety Plans. Pay Rate: $26.74/hourly Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Review all site work to verify compliance in accordance with applicable plans and procedures. * Inspect and diagnose problems to determine corrective actions/repairs. * Inspect work in progress and finished work for discrepancies in accordance with the QC and applicable Safety Plans, and contract requirements.Complete necessary inspection reports and documentation required to support findings. * Assist in preparing Safety incident and hazard reports as required. * Maintains accurate administrative records. * Review all site work to verify compliance in accordance with applicable plans and procedures. * Respond to emergency site maintenance as required. * Ensures proper housekeeping practices are strictly observed. * Maintain open communications with personnel. * Performs other duties as assigned by the supervisor. * Other duties as assigned. Accountable For: * Tools and equipment within his or her possession. * Using PPE when required. * Timely completion and accuracy of all work. * Working closely and harmoniously with fellow workers. * Adherence to all Safety rules and regulations. Job Requirements Mandatory: * Working knowledge of Microsoft Programs, including but not limited to: Outlook, Word, PowerPoint, and Excel or equivalent software program. * Understanding of Government contracts, correspondence, reports, and records. * Knowledge of generally accepted standards of workmanship in custodial services. * Excellent communication skills, both oral and written. * Excellent organizational skills. * Mature judgment and ability to work with little or no supervision. * Ability to communicate ideas effectively with personnel at all levels. * United States Citizen. * High School Diploma or Equivalent. * Ability to pass pre-employment background check and drug screen. * Must be able to read, write, and speak English fluently. * Valid driver's license with excellent driving record (Must provide current driving record). * Ability to obtain access to U.S. Government Installations through the Defense Biometric Identification System (DBIDS). Preferred: * 2 yrs custodial experience. * Two-year degree in Safety, Industrial Hygiene, or a related field or broad experience in the same or similar areas. * Bilingual - Spanish Working Conditions: * Work is performed indoors and outdoors. Outdoor work is subject to temperature extremes and inclement weather conditions. * Work hours are subject to change, with overtime, weekend and/or holiday work as needed. * Subject to hazards that may cause personal bodily harm; diseases, cuts, bruises, burns, common cold, influenza, dust odors and elevated noise levels. * Tasks may be performed on uneven, inclined, hard and soft carpeted floors, cement structures and surfaces. * While performing duties of this job, the employee is occasionally required to stand and/or walk for long periods of time, sit, use of hands and fingers, handle, or feel objects, tools or controls, reach with hands and arms, climb stairs, climb ladders, balance, stoop, kneel, crouch or crawl, talk, hear, or smell. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by the job include close vision. May be required to operate regular and specialized vehicles. Physical Requirements: * Must be able to lift to 50 lbs. * Must be able to climb stairs and ladders as required. * Must be able to load/unload materials, tools, and equipment. * Involves walking, bending, stooping, twisting, and reaching. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Shift: 3rd shift, graveyard (shift begins: 10pm) Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Key Responsibilities: * Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards * Working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part * May evaluate new procedures for non-standard rest and perform special set-up on new equipment * Assist others in correcting or preventing deficiencies in quality or workmanship * Give work direction to other inspectors * Know your customers' expectations and drive action to meet them * Perform first article process * Identify component * Perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality a plus Required skill: * PCBA Experienced * Able to use measurement equipment. * Must be able to read ECO/Dev instruction/build drawer and BOM. * Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: * Attention to detail * Communication skills - verbal and written * Organized and good critical thinking skills * Data collection, management and analysis * Team work * Ability to interpret complex customer rules and regulations * Demonstrated skills in project management and ability to train others to lead projects * Works well independently * Excellent interpersonal and communication skills * Ability to manage time and prioritize multiple task in a fast paced environment * Proficient in use of MS Office applications * Knowledge of Lean manufacturing fundamentals FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic

The Quality Control Inspector (QA/QC) is responsible for implementing quality control and safety plans to ensure compliance with contract specifications, applicable regulations, and company standards. This position inspects all phases of goods, services, and operations to verify conformity with established quality health, and safety requirements. The Quality Control Inspector (QA/QC) performs ongoing inspections to ensure all work meets contractual provisions, confirms that services listed on the performance requirement summary are completed in satisfactory manner, and determines areas to be inspected- both scheduled and unscheduled- as well as the frequency of inspections. This position requires communicating deficiencies to appropriate personnel, maintaining Quality Control files, and documenting the results of inspections. Performs all other position -related duties and assigned or requested. A valid Class A Commercial Driver's License (CDL-A) is required for this position to meet the scope of contract operations. Minimum Requirements High School graduate or equivalent. Must be able to speak, read, write, and understand English. Able to operate and inspect machines or equipment to diagnose defects and submit a request for replacement parts. Dismantles and reassembles equipment, using hoists and hand tools. Examine parts for damage or excessive wear, using micrometers and gauges. Identify defective engines and subassemblies, such as transmissions, and tests overhauled equipment to ensure operating efficiency. Performs scheduled and unscheduled maintenance, repairs, and adjustments of all heavy machinery to ensure the equipment remains fully mission capable for mission support. Performs a variety of collateral duties such as handling, containment, clean-up and disposal of hazardous waste, etc. Operates all heavy equipment and forklifts up to and including 50,000 pounds lift capacity, and a variety of other equipment to trouble shoot faults and validate repairs. Understands and uses safety items and personal protective equipment (PPE) that is mandatory and actively supports the EHS safety program. Required to walk, stand, sit, and move about the property for long periods of time. Required to perform physical activities that require considerable use of the arms and legs and moving the entire body, such as climbing, lifting, balancing, stooping to handle materials. Work in a noise level can range from minimal to intense. Able to lift and/or move up to 50 pounds. Possess a Valid California Commercial Drivers' License (CDL). Must be a US Citizen or able to work in the US. PD Systems is an equal opportunity employer and prohibits discrimination and harassment of any kind. Employment decisions at PD Systems are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Career-defining. Life-changing. At iRhythm, you'll have the opportunity to grow your skills and your career while impacting the lives of people around the world. iRhythm is shaping a future where everyone, everywhere can access the best possible cardiac health solutions. Every day, we collaborate, create, and constantly reimagine what's possible. We think big and move fast, driven by our commitment to put patients first and improve lives. We need builders like you. Curious and innovative problem solvers looking for the chance to meaningfully shape the future of cardiac health, our company, and your career About This Role: The 2nd Shift Quality Control (QC) Inspector is responsible for supporting manufacturing operations during second shift by performing inspection, documentation review, and batch release readiness activities for finished goods and sub-assemblies. This role focuses on reviewing batch records, travelers, and routers, ensuring Good Documentation Practices (GDP) compliance, identifying quality issues, and initiating nonconformances (NCs) when required. The QC Inspector also provides Receiving Inspection (RI) support as needed to ensure material flow continuity and compliance with inspection requirements. Why This Role Is Critical Provides real-time quality oversight on second shift, ensuring batch records, travelers, and GDP compliance are verified at the time of execution rather than retrospectively. Enables timely identification and containment of nonconformances, reducing quality escapes, rework, and compliance risk. Supports on-time release readiness and uninterrupted manufacturing flow, preventing inspection and documentation backlogs into first shift. Strengthens audit readiness and cross-shift continuity, ensuring clear handoff and sustained control of quality issues across shifts. What You WIll Be Doing Batch Record, Traveler & Router Review Perform detailed review of batch records and travelers for finished goods and sub-assemblies to ensure completeness, accuracy, and compliance with approved procedures. Verify that all required manufacturing steps, inspections, testing reports, in-process checks, and approvals are properly completed and documented. Ensure material traceability, including material lots, subassemblies, equipment identification (when applicable), and inspection status. Access and reference the electronic Quality Management System (eQMS) to ensure the current, approved revisions of drawings, specifications, procedures, and work instructions are used during inspection and batch record review activities. Verify that batch records, travelers, and inspection activities are executed against the correct released document revisions, and escalate discrepancies when outdated or incorrect documents are identified Identify documentation errors, omissions, or discrepancies and ensure timely correction in accordance with GDP requirements. Finished Goods & Sub-Assembly Inspection Perform in-process, final, or verification inspections of finished goods and sub-assemblies per approved inspection plans and work instructions. Ensure inspection results are accurately recorded and aligned with acceptance criteria. Support timely review and release readiness of manufacturing lots to maintain production flow. Nonconformance Identification & Escalation Identify, document, and initiate Nonconformance (NC) records when inspection results, documentation, or material conditions do not meet requirements. Ensure nonconforming material is properly identified, labeled, and segregated to prevent unintended use. Escalate quality issues to Quality Control leadership and Manufacturing supervision as required. Good Documentation Practices (GDP) Compliance Enforce GDP standards across all reviewed records, including batch records, travelers, routers, and inspection forms. Ensure corrections, clarifications, and late entries (when applicable) are performed per approved GDP procedures. Support identification of recurring documentation issues and participate in corrective actions or retraining as needed. Receiving Inspection (RI) Support Perform Receiving Inspection (RI) activities when required, following approved sampling plans, inspection criteria, and procedures. Verify material identification, lot traceability, and acceptance status. Accurately document RI results and communicate material status to Manufacturing and Quality teams. Compliance & Audit Readiness Perform all activities in compliance with ISO 13485, and internal QMS SOPs, DOP's and work instructions. Maintain inspection areas and records in a state of audit readiness. Support internal audits and regulatory inspections by providing accurate records and inspection evidence as requested. Cross-Shift & Cross-Functional Communication Communicate inspection results, documentation issues, and open quality concerns clearly during shift handoffs. Collaborate with Manufacturing, Quality Engineering, Receiving, and first-shift QC personnel to ensure continuity of quality controls. What We Want to See High School Diploma or GED required; Associate's or Bachelor's Degree in a technical or life sciences field is preferred. Minimum of 2-5 years of experience in a medical device manufacturing, pharma, aerospace or regulated manufacturing environment, preferably in Quality Control or Inspection. Experience navigating an electronic Quality Management System (eQMS) to review and reference released drawings, specifications, SOPs, and work instructions Working knowledge of Good Documentation Practices (GDP) and controlled document execution. Experience reviewing batch records, travelers, routers, and inspection records. Ability to identify quality issues and initiate nonconformance records in accordance with established procedures. Strong attention to detail with a focus on accuracy, compliance, and data integrity. Ability to work independently on second shift with minimal supervision. Effective verbal and written communication skills. Ability to manage multiple tasks and prioritize work to support production needs. Ways to Stand Out Experience performing Receiving Inspection (RI) or FAI activities. Familiarity with sampling plans, inspection plans, and acceptance criteria. Demonstrated experience reviewing engineering drawings, including GD&T, to identify critical-to-quality (CTQ) characteristics, specification notes, and applicable inspection requirements, and applying them during inspection and batch record review Experience using enterprise resource planning (ERP) systems (e.g., QAD, SAP) to support manufacturing execution, batch review, material status, and traceability is a plus Location: Orange County Actual compensation may vary depending on job-related factors including knowledge, skills, experience, and work location. Estimated Pay Range $21.15 - $26.44 As a part of our core values, we ensure an inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws. iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at ********************* About iRhythm Technologies iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all. Make iRhythm your path forward. Zio, the heart monitor that changed the game. There have been instances where individuals not associated with iRhythm have impersonated iRhythm employees pretending to be involved in the iRhythm recruiting process, or created postings for positions that do not exist. Please note that all open positions will always be shown here on the iRhythm Careers page, and all communications regarding the application, interview and hiring process will come from a @irhythmtech.com email address. Please check any communications to be sure they come directly from @irhythmtech.com email address. If you believe you have been the victim of an imposter or want to confirm that the person you are communicating with is legitimate, please contact *********************. Written offers of employment will be extended in a formal offer letter from an @irhythmtech.com email address ONLY. For more information, see *********************************************************************************** and *****************************************

Job DescriptionFrom Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Role OverviewThis is a full-time, on-site role for a Quality Control Inspector located in Ontario, CA. The Quality Control Inspector will be responsible for conducting inspections, ensuring quality control and quality assurance, and managing quality-related processes. The inspector will perform regular quality checks, document findings, analyze quality data, and maintain records. The role also involves collaborating with other team members to identify and address any quality issues and implementing corrective actions to ensure products meet the company's standards.Key Responsibilities Conduct in-process and final inspections of products to ensure conformance to standards. Perform regular quality checks, document findings, and analyze quality data. Maintain accurate and detailed records of inspections and test results. Collaborate with production teams to identify and address quality issues. Assist in implementing corrective actions to ensure products meet company standards. Ensure all processes and products adhere to industry standards and regulations. Required Qualifications Proven experience in Quality Control, Quality Assurance, and Inspection. Experience with Quality Management systems and processes. Strong communication skills. Excellent attention to detail and problem-solving abilities. Ability to work independently and as part of a team. Knowledge of industry standards and regulations. Associate degree or equivalent relevant experience. Preferred Qualifications Bachelor's Degree is preferred. Additional certifications in quality control or related fields are a plus. Previous experience in a manufacturing or fabrication environment is beneficial. Additional Requirements: Willingness to work long hours and weekends when needed to meet critical deadlines Willingness to travel to customers' locations or other Hera sites as needed Ability to use a computer and most common software programs to complete assignments Ability to communicate with individuals and groups in person, by phone and online Job DetailsType: Full TimeBusiness Hours: 7:00 AM - 3:30 PM or 2:00 PM - 12:30 AMHourly Range: $25 to $33Base Location: Ontario, CATravel: Up to 10% Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The base salary is just one part of your total compensation package at Hera. You will also have access to a comprehensive set of benefits like: Company paid employee medical, dental and vision insurance Retirement plan participation (eligibility required) Paid Sick LeavePaid VacationPaid holidays Discretionary bonuses Physical Requirements / Work Environments· Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations· Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly· Visual acuity required for reading technical drawings and digital media· Valid US driver's license and ability to operate motor vehicles The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. EXPORT CONTROL REQUIREMENTS:To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Hera Technologies is an Equal Opportunity Employer, employment with Hera Technologies is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

(**************** is in North Orange County in the city of Brea, California. Life Science Outsourcing, Inc (LSO) is a contract manufacturer of medical devices with in-built capabilities to offer clients full-service solutions through our six divisions. Clients rely on LSO to perform all activities required to introduce their products to market, from sourcing to drop shipping. We are looking for a proactive and enthusiastic Receiving QC Inspector with a good positive energy to join our team. In this role you will be responsible for ensuring that all incoming medical devices meet the necessary quality standards and comply with all applicable regulations. We encourage you to submit a resume with salary requirements. Job Description Perform incoming inspection of medical devices, including visual inspection and dimensional measurement Verify an document product compliance with regulatory and company requirements Identify and document non-conformance found during inspection Participate in investigations related to non-conformance or product quality issues Assist with the development and implementation of inspection procedures Maintain accurate and up-to-date records of inspection results Communicate effectively with team members, supervisors, and other departments as needed Qualifications To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements listed below are representative of knowledge, skill and or ability required. High school diploma or equivalent Experience in quality control related field preferred Knowledge of medical devices regulations and standards preferred Ability to use measuring tools and equipment Detail-oriented with excellent organizational and communication skills Ability to work independently and as part of a team Proficient in Microsoft Office applications, Word and Excel PHYSICL DEMANDS This position requires the ability to work on your feet for extended periods of time, as well as the ability to bend, stoop and lift objects. Walk extended distances as needed. Additional Information All your information will be kept confidential according to EEO guidelines.

Duties and Responsibilities: * Perform inspections of purchased parts according to acceptance criteria using standard sampling plan. * Able to perform First Article Inspection (FAI) of manufactured parts, electromechanical assemblies and final assemblies. * Physical, mechanical and/or electrical measurements in compliance with the company Quality System. * Accurately document results of inspection / testing and maintain controlled document files, logs and test records. * Inspect cables per wiring configuration. * Initiate non-conformance process and assist in resolving non-conformances. * Monitor receiving inspection backlog. * Able to be flexible with the work schedule. * Process SAP transactions to segregate and disposition non-conforming product. * Other duties and responsibilities in the Quality Department as assigned. * Ability to conduct basic troubleshooting and problem resolution. Education and Experience: * High School Diploma or Equivalent. Preferred one year of experience in an FDA regulated environment and/or ISO 13485 standards in the medical device industry and/or in-vitro diagnostics preferred. Technical and physical position requirements: * Familiar with measuring equipment such as micrometer, caliper height gauges, plug gauges. * Able to lift at least 35 lbs. * Strong attention to details and ability to understand and follow complex procedures. * Working knowledge and experience in basic computer applications such as Microsoft Word, Excel and Outlook. * Effective and clear written and verbal communication skills in English language. The US base salary range for this full-time position is $20.60 - $31.60. Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the base pay target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. In addition to compensation, Zoetis offers a comprehensive benefits package that supports the physical, emotional and financial wellbeing of our colleagues and their families including healthcare and insurance benefits beginning on day one, a 401K plan with a match and profit-sharing contribution from Zoetis, and 4 weeks of vacation. Visit zoetisbenefits.com to learn more. Full time Regular Colleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of "@zoetis.com". In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

Full-time Description The Quality Control Inspector is responsible for maintaining quality standards by inspecting and approving machined, in-process production, purchased and finished products; recording quality results. The QC Inspector will work under limited supervision and directly with other inspectors and machinists to deliver a high quality product. Essential Duties & Functions: Completes all duties and responsibilities in adherence with Tri Tool's core values. Perform manual inspection of parts on surface plate using mechanical hand tools such as height gages, micrometers, and calipers. Inspects first article, in-process and final products by confirming product meets applicable drawings and specifications; conducting visual and measurement tests; documenting and communicating rejections of unacceptable items. Inspection of products for outside processes such as: heat treat, machining, plating/painting, engraving etc. Receiving inspection of purchased products and outside processes. Operate Manual and DCC bridge CMMs running CMM Manager. Write programs, fixture, and report for machined metal parts. Record and document inspection data in logs and computer tracking tools. Keep inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are deemed necessary. Perform in-house calibrations on equipment such as micrometers, plug gages, thread gages, etc. Maintains a safe and healthy work environment by following standards and procedures; complying with State, Federal, and Company safety regulations. Effectively communicates with coworkers and managers to support efficient production. Performs other work in related duties as assigned to ensure a highly maintained and safe department. Work as part of the team to ensure productivity and cross train to other departments as needed. Requirements Requirements & Qualifications: High School Diploma or equivalent. A.A. degree in Machining/Inspection desirable; 2+ years of experience in field machining or manufacturing or technical training related to manufacturing; 1-2 years of full time inspection experience with previous machining experience. May consider machining experience only with directly related technical training; Proficient with inspecting multiple production processes including; turning, milling, grinding, fabricating, etc.; Ability to demonstrate a high level in reading and interpreting blueprints, specifications, and related documents; Familiar with ansi y14.5; Knowledge of ISO practices. Calculate figures using basic shop math; Reading of calipers, micrometers, bore gages, dial indicators, height gages, etc.; Operate manual and DCC CMM; Working knowledge of Tri Tool's product line preferred; Basic computer skills; MS Office applications and/or Inspection Software; Must have and demonstrate good decision making skills. Salary Description $25-$28 per hour depending on experience

Quality Inspector 1st Shift - Riverside, CA Portables M-F 6:30AM-3PM $20.12-$23.74Hr LUXFER GAS CYLINDERS is the world's largest manufacturer of high-pressure composite cylinders. We have a proven record for dependability and safety. American Made products that save the lives of firefighters and first responders!! JOB DESCRIPTION: You will perform inline quality inspections, checks, and tests during the manufacturing process. Records defects on a daily basis and may make recommendations for improving processes. As a Quality Inspector, you will work closely with Production to identify nonconforming materials on the shop floor. ACTIVITIES: The main activities of the position include but are not limited to the following: * Responsible for inspecting materials for quality and defects. * Inspects cylinders internally, externally, and dimensionally to ensure they meet all internal and external customer requirements. * Perform in-process inspection and final inspection. * Identify non-conforming material and notify the Quality Lead or Team Leader to generate non-conforming material reports. * Generate rework tags and send nonconforming material to various areas for rework. * Give feedback from personal experiences on the shop floor to help improve Production/Quality processes and possibly assist in implementing and testing out these new processes. QUALIFICATION/REQUIREMENTS: * Able to lift product and stand for extended periods of time. * Ability to read Pi-Tape, Calipers, Depth Gauge, and a weight scale. * Requires a high school diploma or its equivalent and 2 years of related experience. * Familiar with standard concepts, practices, and procedures within the quality function. * Relies on experience and judgment to plan and accomplish goals. * Demonstrated ability to troubleshoot and problem solve. * At least 18 years old * Able to pass a Drug Test * The acceptable outcome of a Background Check We are committed to a safe, drug-free work environment and pre-employment drug screening, physical and background checks are required prior to starting. Candidates must be authorized to work in the US. Luxfer Cylinders is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. Women, minorities and veterans are encouraged to apply. NOTICE FOR CALIFORNIA RESIDENTS Pursuant to the California Privacy Rights Act, if you are a California resident, you have the right to know the categories of personal information we collect and how it's used. Please visit the site below to access our California Privacy Rights Act Policy for candidates and employees. ******************************************************************************************************************************************

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule This is a 3 - 4 x 11 rotating shift working alternating Wednesdays. Shifts Available Sun - Wed 1st shift (5am - 4:30pm) Sun - Wed 2nd shift (4pm - 3:30am) Wed - Sat 1st shift (5am - 4:30pm) Wed - Sat 2nd shift (4pm - 3:30am) Purpose This Lead role is accountable for driving inspection excellence across the organization. In addition to performing complex metrology work, this position provides day-to-day leadership, mentorship, and coordination for the inspection team. The Lead ensures high standards are upheld, inspection priorities are managed effectively, and knowledge is developed across the team. Through technical expertise and a hands-on presence, you will guide peers, foster collaboration, and deliver accurate inspection results that ensure compliance with engineering specifications. The Role Perform advanced inspection and metrology work using scanners (FARO, Romer, Creaform, GOM, etc.) and 3D software (PolyWorks, Zeiss). Deliver accurate inspection files, data, and reports to ensure compliance with engineering requirements. Lead by example through direct hands-on inspection work (at least 50% of shift). Receive and provide clear shift handoffs with both written and verbal updates to maintain continuity. Prioritize and delegate daily tasks, balancing team capacity and operational needs. Conduct spot checks, provide feedback, and uphold high-quality standards across the team. Mentor and train peers, including onboarding of new inspectors and cross-training initiatives. Maintain situational awareness of work progress, equipment status, and team needs throughout the shift Foster a positive, collaborative team culture, demonstrating emotional intelligence and conflict resolution skills. Ensure the Metrology Lab remains clean, organized, and safe in alignment with 5S practices. Basic Qualifications Ability to lawfully access information and technology that is subject to US export controls Minimum 2-3 years of experience in a Quality Inspection or Metrology role in aerospace, automotive, or other high-precision production environment. High-school diploma (required). Proficiency in computer systems (Windows, Teams, Excel, etc.). Strong ability to interpret engineering drawings, GD&T, and specifications. Physical ability to lift up to 50 lbs and operate scanning equipment for extended periods. Excellent written and verbal communication skills. Strong problem-solving and analytical mindset. Team-first approach with proven ability to lead by example. Preferred Qualifications Associate degree or higher in a technical field, or equivalent work experience. Prior experience in a lead, mentoring, or training capacity. Background in cross-functional collaboration with Quality, Engineering, and Production teams. Experience in regulated or high-performance manufacturing environments. Work Environment This role is based in a dynamic manufacturing setting and may require standing and handling precision equipment for extended periods of time. Must be able to lift at least 25 lbs. Company Uniform must be worn while working. PPE must be worn while working. Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels ABC - XYZ as evaluated through our interview process. Lead Technician / T04: $29.00 - $40.00 Senior Technician / T05: $32.00 - $44.00 Pay Range$29-$44 USD What We Offer: Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Duties & Responsibilities: * Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards * working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part * may evaluate new procedures for non-standard rest and perform special set-up on new equipment * assist others in correcting or preventing deficiencies in quality or workmanship * give work direction to other inspectors * know your customers expectations and drive action to meet them * perform first article process * identify component * perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality Required skill: PCBA Experienced Able to use measurement equipment. Must be able to read ECO/Dev instruction/build drawer and BOM. Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: * Attention to detail * Communication skills - verbal and written * Organizing * Judgement * Data collection, management and analysis * Team work * Ability to interpret complex customer rules and regulations * Demonstrated skills in project management and ability to train others to lead projects * Works well independently * Excellent interpersonal and communication skills * Ability to mange time and prioritize multiple task in a fast paced environment * Proficient in use of MS Office applications, MS Project, Outlook * May require international travel and international business experience * Knowledge of Lean manufacturing fundamentals

The Quality Control Inspector (QA/QC) is responsible for implementing quality control and safety plans to ensure compliance with contract specifications, applicable regulations, and company standards. This position inspects all phases of goods, services, and operations to verify conformity with established quality health, and safety requirements. The Quality Control Inspector (QA/QC) performs ongoing inspections to ensure all work meets contractual provisions, confirms that services listed on the performance requirement summary are completed in satisfactory manner, and determines areas to be inspected- both scheduled and unscheduled- as well as the frequency of inspections. This position requires communicating deficiencies to appropriate personnel, maintaining Quality Control files, and documenting the results of inspections. Performs all other position -related duties and assigned or requested. A valid Class A Commercial Driver's License (CDL-A) is required for this position to meet the scope of contract operations. Minimum Requirements High School graduate or equivalent. Must be able to speak, read, write, and understand English. Able to operate and inspect machines or equipment to diagnose defects and submit a request for replacement parts. Dismantles and reassembles equipment, using hoists and hand tools. Examine parts for damage or excessive wear, using micrometers and gauges. Identify defective engines and subassemblies, such as transmissions, and tests overhauled equipment to ensure operating efficiency. Performs scheduled and unscheduled maintenance, repairs, and adjustments of all heavy machinery to ensure the equipment remains fully mission capable for mission support. Performs a variety of collateral duties such as handling, containment, clean-up and disposal of hazardous waste, etc. Operates all heavy equipment and forklifts up to and including 50,000 pounds lift capacity, and a variety of other equipment to trouble shoot faults and validate repairs. Understands and uses safety items and personal protective equipment (PPE) that is mandatory and actively supports the EHS safety program. Required to walk, stand, sit, and move about the property for long periods of time. Required to perform physical activities that require considerable use of the arms and legs and moving the entire body, such as climbing, lifting, balancing, stooping to handle materials. Work in a noise level can range from minimal to intense. Able to lift and/or move up to 50 pounds. Possess a Valid California Commercial Drivers' License (CDL). Must be a US Citizen or able to work in the US. PD Systems is an equal opportunity employer and prohibits discrimination and harassment of any kind. Employment decisions at PD Systems are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.