Quality inspector jobs in Cape Canaveral, FL - 106 jobs

Job Description Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Must be able to climb and lift up to 50lbs. Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

WHO WE ARE Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don't just make parts-we solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. JOB SUMMARY Conducts basic visual and measurement inspection of materials and products for conformance to blueprint specifications. Applies and maintains the company and customer quality standards for industrial processes, materials, and products by performing the following job duties. Shift Hours: 6:30am to 3:00pm Mon-Fri ESSENTIAL DUTIES AND RESPONSIBILITIES Primary responsibility will be to measure parts with basic measuring instruments for receiving inspection, 100% inspection, and final inspection. Identifies defects or discrepancies and reports them to the Inspection Supervisor as needed. Understands and observes all necessary safety procedures: safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc. as designated in specific work area assigned. Work with precision and accuracy of production equipment and testing measurement and facilities. Follows procedures for nonconformance procedure on both paper and ERP systems. Computes unspecified dimensions and other data like variances as needed. Required to verify accuracy of basic gauges (i.e. calipers and micrometers, various go and no-go gauges) and reports discrepancies to Inspection Supervisor. Checks accuracy of parts according to blueprint specifications. Checks parts for measurement of dimensions and tolerances (i.e. GD&T) Compares product with parts list of sample model to ensure completion of assembly. Daily use of an ERP system (i.e. Epicor) to perform data entry or inquiry as needed in accordance to established company guidelines. Rejects defective parts and marks type of defect on proper documentation of paperwork or tag. Reads blueprint and Job Traveler for such information as dimensions, tolerances, work center outside services and finished operations and number of workpieces to be machined. Understands and follows Prince quality certifications (i.e. ISO) as relates to position. Completes all necessary job-related paperwork in a concise and timely manner (such as tags inspection reports.) Transport the finished materials, manually or using pallet jack, to area indicated in Job Traveler. Maintains good housekeeping in work area. Works under direct supervision. Works effectively with all department personnel and co-workers in a harmonious and cooperative manner to meet the needs and goals established by the company. May be required to work in the shop on production or work directly with shop personnel as instructed by Inspection Supervisor. Additional responsibilities as assigned by the supervisor may include department transfers to meet production needs. EDUCATION AND EXPERIENCE High school diploma or equivalent (GED) preferred. Previous experience, apprenticeship, or formal training desired. A minimum of 3 years experience in inspection field. Demonstrated experience using GD&T principles to measure appropriate gauges for work pieces Certification in related field strongly desired. Requirements QUALIFICATION REQUIREMENTS Ability to recognize and interpret documents such as safety rules, operating and maintenance instructions, inspection materials and procedure manuals. Ability to communicate effectively in both oral and written form with supervisor and all levels within the company as it relates to the job duties. Ability to comprehend and follow simple oral or written instructions. Ability to perform advanced math skills related to manufacturing environment. Ability to read and interpret blueprints. (i.e. assembly blueprint, production blueprint, etc.). Knowledge of standard concepts, practices and procedures within inspection and quality control field. Excellent knowledge of company's quality and production standards. Familiar with relevant ISO procedures. Proficient in the use of basic inspection measurement equipment. (i.e. calipers, micrometers, height gauge, thread gauges, plug gauges) Ability to pay attention to detail to visually inspect and recognize discrepancies in part's defects, blueprints, etc. Basic computer skills in Microsoft Suite (i.e. Word, Excel, Outlook, Teams) Must be able to read, write, and speak English. PHYSICAL JOB REQUIREMENTS Regularly required to sit, stand, or walk the duration of shift, 8-10 hours. Occasionally required to stoop, kneel, crouch, reach or bend. Regularly lift, push, or pull up to 20 pounds and occasionally up to 40 pounds. Specific vision abilities required by this job include close vision in which 20/20 vision or corrected vision to 20/20 vision is required. Occasionally exposed to moving mechanical parts. Occasionally required to work on the production floor as it relates to the job duties and responsibilities. The noise level in the work environment is sometimes loud when working in the plant, in which hearing protection is required. Must be able to communicate clearly and accurately in noisy environments. Must also have close, distance, and peripheral vision, with the ability to adjust focus and judge depth. Color vision is required as well. Must be able to read, write, and speak English. Benefits Blue Cross Blue Shield Medical insurance (PPO and HDHP with HSA) w/ Prescription Coverage Dental PPO Insurance Vision PPO Insurance Short-Term & Long-Term Disability Insurance Company Paid Life Insurance and AD & D - Including options to add on additional life insurance for yourself, spouse & children. Critical Illness Insurance Accident Insurance 401(k) Fidelity Plan with strong employer match Personal Retirement Advisor Generous PTO Policy and 9 Paid Holidays per year 100% Tuition Reimbursement for Job-Related Classes Personal Protective Equipment reimbursement (safety glasses, shoes, etc.) Uniform Rental Service Employee Events COMPENSATION: $24-27 per hour Due to ITAR regulations, only U.S. persons-defined as U.S. citizens, lawful permanent residents (Green Card holders), and U.S. nationals-are eligible for this position. *We are an Equal Employment Opportunity ("EEO") Employer. Applicants can learn more about Prince's status as an equal opportunity employer by viewing the federal "EEO is the Law" poster ( ****************************** )

Job DescriptionDescription: This role will perform first article inspection, final and in process testing, and gage calibration to customer and design requirements. They will also perform data entry, problem solving, and other quality control activities as assigned by management. Essential Job Functions: Assure consistent quality of production by developing and enforcing good manufacturing practice (GMP) systems using, but not limited to, Micrometers, Calipers, Thread & Pin Gauges, Surface Plates and Height Gauges for validation Validate processes, through inspection, and document findings appropriately Provide accurate and complete documentation, including developing Quality instructions Managing workload and pace to accomplish internal productivity goals Ability to take engineering drawings and create, document, and implement inspection and test plans to validate quality parts more efficiently Ability to read and communicate blueprints to shop floor personnel Push, Pull, Lift, and Carry up to 45 lbs. Completing process documentation accurately and completely Must be familiar with data entry and proficient with Microsoft Office Ability to read and follow documented procedures, standards, and/or instructions Participate in training opportunities Must be able to work 3:00 PM - 11:30 PM (2nd Shift) Requirements: Visual and Mechanical Inspection of manufactured components using, but not limited to, Micrometers, Calipers, Thread & Pin Gauges, Surface Plates and Height Gauges required High School Diploma and a minimum of one (1) to five (5) years of related Quality Control experience required Ability to effectively communicate both verbally and in writing with colleagues and departmental leadership required Evaluating Certificate of Conformance validity for material and/or special process preferred Processing First Article Inspections preferred Experience working in an ISO 9001/AS9100 certified manufacturing environment preferred Management reserves the right to assign or reassign duties and responsibilities to this job at any time. EOE, including disability/vets

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Job Title: Quality TechnicianJob Description Work directly with the engineering team to develop new operation processes and operate various machines to produce quality parts as instructed. Ensure all operations adhere to company procedures and safety standards, contributing to a clean and efficient work environment. Responsibilities * Operate Electrical Discharge Machine (EDM), waterjet, air flow, and laser machines to produce quality parts as instructed by Operation Process Sheets. * Work with tools such as drill press, belt sander, orbital sander, swivel deburr, bench grinder, and other hand tools according to instructions. * Utilize inspection equipment to ensure product quality. * Complete documentation accurately and correctly scan on/off shop orders. * Utilize and understand operation process sheets and inspect parts per character control sheets. * Notify Supervisor immediately in case of damage, defect, or inability to proceed efficiently. * Collaborate effectively with team members and other departments as needed. * Use approved software and follow company processes and procedures. * Perform all tasks in a safe and reasonable manner according to the company's Employee Handbook. * Maintain a clean and safe work environment and contribute to the company's 6S program and Lean concepts. * Comply with all quality policies, specifications, regulations, and instructions. Essential Skills * Experience with EDM, fusion, and laser machines, with fiber optic laser experience being a plus. * Fusion hole drilling experience. * Ability to work independently or as part of a team. * Strong focus and attention to detail. * Proficiency in mid-level math skills, including working with whole numbers, fractions, and decimals. * Proficiency in using inspection equipment like calipers, micrometers, gage pins, and height gages. * Ability to read blueprints. * Ability to read and follow company processes, policies, and procedures. Additional Skills & Qualifications * Experience with fiber optic laser technology is desirable. Work Environment The role operates in a manufacturing, fabrication, and welding tooling shop environment. The position is for the 2nd shift from 3:30 PM to 12:30 AM, Monday to Friday. The engineering team works from cubicles off of the large, clean, indoor machine shop. Clients are primarily in the aviation and aerospace sectors, focusing on tooling and fabrication of parts. The company promotes a small, family-oriented environment with a team-first mindset. Job Type & Location This is a Permanent position based out of Palm Bay, FL. Pay and Benefits The pay range for this position is $60000.00 - $72000.00/yr. health/dental/vision insurance, 401(k) with company match, life/disability insurance, paid time off (PTO), tuition reimbursement, and wellness programs like counseling/dietitian access Workplace Type This is a fully onsite position in Palm Bay,FL. Application Deadline This position is anticipated to close on Dec 31, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

We are seeking an enthusiastic, energetic, and customer-focused Repair Station Quality Inspector to support training, development, and standards functions at Cirrus Aircraft. This individual plays a critical role in ensuring operational excellence through quality control of in-process, incoming, and outgoing inspections, mechanic training, work order recordkeeping, and return-to-service processes. The ideal candidate has a strong passion for quality systems, shows exceptional initiative, and demonstrates a proactive mindset. The successful applicant will possess proficiency in Microsoft Office products, working knowledge of FAA Parts 145, 43, 91, and 135, and experience with Cirrus SR and SF aircraft. This position is for weekend shift Friday - Monday 7:00am - 5:30pm **Weekend shift comes with a 12% shift differential Duties and Responsibilities/Essential Functions Conduct hidden-damage, in-process, and final inspections on civil aviation articles in accordance with current technical data from manufacturers, FAA-approved data, and standard industry practices. Perform receiving inspections on incoming materials and parts when the parts department is unavailable. Provide on-the-job (OJT) training to newly hired Aviation Maintenance Technicians (AMTs). Ensure thorough knowledge of applicable FAA regulations relevant to their duties. Be proficient in inspection methods, techniques, tools, and equipment necessary for determining airworthiness. Maintain proficiency in using Inspection Aids related to their assigned area of responsibility. Verify inspection tools, equipment, and aids are in working order and properly calibrated with up-to-date calibration labels. Understand applicable specifications, tolerances, and limitations as defined by the article's manufacturer. Ensure inspections are performed and recorded correctly, and that maintenance and alteration records are properly executed prior to return-to-service authorization. When authorized and properly qualified, perform return-to-service approvals for repaired, maintained, or altered articles. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. FAA certificated Airframe and Power Plant + 3 years relevant experience Thorough knowledge of FAA Part 65, 43, 91, or Part 145 regulations. Demonstrated strong customer service and interpersonal skills. Familiarity with the business intelligence applications such as EBIS and Salesforce. Experience with Learning Management Systems preferred Competencies To perform the job successfully, an individual should demonstrate the following competencies: Customer Focus: Builds strong customer relationships and delivers customer-centric solutions. Collaborates: Builds partnerships and works collaboratively with others to meet shared objectives. Action Oriented: Takes on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Interpersonal Savvy: Relates openly and comfortably with diverse groups of people. Communicate Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Our Benefits: Cirrus provides a range of exciting benefits, including: 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. Employer-Paid Coverages: Group term life, short- and long-term disability insurance. Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. Free Health Tracking: With rewards for meeting health goals. Generous PTO: 100 + hours accrued within the first year. Employee Referral Bonus: For referring talented candidates. Career Development: Tuition reimbursement and professional growth opportunities. Exclusive Discounts: Access to partner and marketplace discounts. Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus! Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

RK&K's Construction Engineering Inspection and Construction Management Division is hiring Senior Construction Inspectors in and around the Orlando Florida, FL area. As a Senior Construction Inspector with RK&K you will strengthen our construction engineering and inspection business while leading complex and routine inspections on projects including highway, bridge, design/design-build projects. Opportunities for growth and training into construction management and office engineering careers. Essential Function Provide construction management support, including inspection and monitoring of construction structures to ensure compliance with safety regulations Fully engage in solving complex problems to provide technical evaluation and sound solutions Monitor the activities of other Inspectors Ability to communicate effectively across different platforms with project management, clients, stakeholders, and contractors Interface with clients, state and federal agencies, and other engineering disciplines on construction projects Recordkeeping and reporting as required Required Skills and Experience High school graduate or equivalent plus four (4) years of experience in construction inspection, two (2) year of which shall have been in roadway construction inspection Must have the following as required by the scope of work for the project: Qualifications CTQP Concrete Field Inspector Level I CTQP Concrete Field Inspector Level II (Bridges) CTQP Asphalt Roadway Level I and Level II CTQP Earthwork Construction Inspection Level I and Level II CTQP Drilled Shaft CTQP Final Estimates I FDOT Intermediate MOT Preferred Skills and Experience Previous roadway asphalt inspection experience Critical Structures Construction Issues certification FDOT Self Study Computer Based Training (e.g. MSE Wall Inspector) Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Job Description The Quality Control Inspector is responsible for identifying, managing, and documenting events, discrepancies associated with either product or process as well as managing, writing any investigations that may be a result of those event, processing and investigating for customers, and consumer product complaints. DUTIES & RESPONSIBILITIES 1. Essential Duties: a. Perform incoming, set up, in-process and final inspection activities as specified by control plans using inspection tools such as micrometers, optical comparator, calipers. b. Perform audits and develop reports and tracking measurements as assigned by Production Planning Manager or Quality Assurance Manager. c. Complete inspection record as specified by product control plan and work instructions. d. As needed, perform open layout inspections, fulfilling product control plan and First Article requirements. 2. Supports all company programs and strictly adheres to company policies. 3. Performs other functions as assigned by supervisor from time to time. JOB SPECIFICATIONS B. Skills: Ability to multi-task and work with others in a fast-paced environment. Highly-developed problem-solving skills with a strong attention to detail. Customer-oriented and service-minded. C. Work Experience: Experienced in Manufacturing or Quality related field.

As a Quality Control Inspector, you will play a vital role in maintaining the highest standards of quality for our products. You will be responsible for thoroughly inspecting materials, components, and finished products to ensure compliance with specifications and industry standards. Your meticulous eye for detail will help us deliver products that meet and exceed customer expectations. Additionally, you will have the opportunity to collaborate with cross-functional teams, identify process improvements, and contribute to a culture of continuous improvement. You will have the chance to showcase your commitment to quality as you participate in our annual AISC QC Audits and develop goals to improve and promote quality throughout the organization. Your ability to work well with production to solve any issues that arise will be crucial in maintaining our high standards. Embrace this exciting opportunity to make a significant impact on our quality control processes and join our team of dedicated professionals. Qualifications: A minimum of 5 years of experience in laying out and fabricating steel is required for this position. Ability to accurately read and interpret fabrication and construction drawings will be essential in ensuring the quality of our products. Welding Certification in D1.1 and/or D1.5 is preferred, as it demonstrates your proficiency in welding standards. Strong attention to detail, excellent problem-solving skills, and the ability to work collaboratively with cross-functional teams is crucial in maintaining our high standards of quality. Benefits: Health/dental/vision/disability insurance Paid time off Paid holidays 401k with employer match and 100% vesting from the beginning Paid weekly Company Paid Life Insurance Selected applicant will be subject to a pre-employment physical with drug/alcohol testing.

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

We are looking for a diligent and detail-oriented Quality Inspector to join our warehouse team. The Quality Inspector will be responsible for ensuring the quality and quantity of items received and shipped for orders related to the Department of Defense (DOD). The ideal candidate will have strong organizational skills, a keen eye for detail, and the ability to work in a dynamic, fast-paced environment. What You'll Do: Receive and inspect incoming shipments to ensure items meet required quality and quantity specifications. Conduct random quality inspections of assemblies throughout the production process and perform final inspections of completed orders before shipment. Handle necessary paperwork, including inventory records, inspection reports, and receiving forms. Accurately enter inspection and inventory data into the company's computer system. Keep track of job orders, percentage of completion and deadlines. Assist the production department with tasks as needed, demonstrating flexibility and a willingness to take on multiple roles. What You'll Need: Must possess a valid forklift operator license. Must be a U.S. citizen (required for DOD-related work). Ability to pass a background check and drug test. Bilingual (English/Spanish) preferred. High attention to detail and strong organizational skills. Familiarity with warehouse operations, inventory management, and quality control processes. Handy and comfortable working with tools and in a hands-on environment to optimize processes and space utilization. Flexibility to wear multiple hats and assist other departments as needed. Basic computer proficiency for data entry and reporting. Ability to lift and move objects weighing up to 50lbs. Ability to stand and walk for extended periods in a warehouse environment. What You'll Get: Range: $42,000-$45,000 Medical Insurance: Employer pays 50% of medical insurance cost 6 annual paid holidays (available after 90 days of employment) 5 days' vacation + 3 sick days after 1 year of employment

Job Title: Quality Control Inspector Division: FiOptix Inc FSLA Status: Non-Exempt Reports To: Project Manager Job Summary: This position is responsible for identifying and escalating quality deficiencies to support the completion of assigned work. Essential Duties and Responsibilities: Perform real time inspections evaluating safety, compliance standards, appearance, and customer experience Schedule and complete a final inspection of work prior to customer walkthrough Complete and submit timely and accurate quality control reports into the appropriate database Develop and maintain relationships with the quality control counterparts of our customers Respond appropriately to customer complaints and inquiries and escalate matters as required Execute target amount of job safety observations Identify areas of improvement to enhance quality and escalate recommendations to management Complete all required Company documentation Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: One-year telecommunications quality control experience One-year underground construction, aerial construction, and/or multi dwelling unit (MDU) experience Knowledge of highway traffic control standards Technical Skills: Computer and Microsoft Office proficiency Ability to use a wireless tablet Proven knowledge of utility depths and placement Proven ability to read and interpret design prints Soft Skills: Highly organized and detail orientated Strong verbal and written communication skills Ability to work independently and as a member of various teams Ability to multi-task and work in a fast-paced environment under tight deadlines Ability to lead, teach, and train other employees Physical Requirements: Must be able to pass pre-employment screening that includes background and drug testing Must have a valid driver's license and a driving record that meets Company requirements Must be in good physical condition with the ability to stoop, crawl, bend at the knees and waist, squat and lift up to 50 lbs. Ability to stand for long periods of time on varied surfaces Ability to work outdoors in all types of weather May be required to work long and unpredictable hours Ability to travel up to 100% of the time, including short notice travel. Travel includes local site travel or national travel depending on business needs. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations

Job DescriptionProduction Quality TechnicianThe Production Quality Technician plays a key role in ensuring the consistency, safety, and compliance of all manufactured products and processes. This position focuses on quality assurance for batch-manufactured products, incoming raw materials, packaging, labeling, outgoing shipments, product testing, and internal processes - all in alignment with ISO 9001:2015 and the company's Quality Management System (QMS). A strong quality mindset, excellent teamwork, communication skills, and attention to detail are essential for success in this role.Key Responsibilities • Develop a thorough understanding of all processes related to product manufacturing, identification, packaging, shipping preparation, and quality assurance for all products and materials. • Gain comprehensive knowledge of all product lines, documentation standards, and the EBS Quality Management System (ISO 9001:2015). • Perform quality testing, inspections, and reporting on both products and incoming materials. • Prepare, review, and correct Certificates of Analysis and other quality-related documentation. • Record test results and production data; utilize statistical software, data analysis techniques, and SPC charting to monitor and improve performance.• Safely handle, weigh, and transfer hazardous materials from bulk containers for use in production.• Perform calibration, verification, and maintenance on all equipment; monitor and record process and environmental data; prepare reports for management and regulatory agencies.• Maintain a compliant, organized laboratory notebook in accordance with intellectual property protection standards.• Investigate non-conformances and implement corrective and preventive actions. • Support continuous improvement and maintenance of the Quality Management System (QMS) by writing, reviewing, and updating procedures and documentation. • Maintain a clean and safe work environment; consistently adhere to all safety policies and protocols. Qualifications· • Associate degree or higher preferred; equivalent experience or certifications may be considered.· • Strong understanding of mathematics and statistics (beyond algebra).· • Proficiency with Microsoft Excel, Access, and Office Suite; experience with statistical or SPC software a plus.· • Strong mechanical aptitude and familiarity with basic hand tools.· • Excellent attention to detail and a commitment to product quality.· • Ability to read and follow Standard Operating Procedures (SOPs).· • Willingness to work overtime or weekends as needed, and adjust shifts to cover absences or vacations. Physical Requirements· • Ability to perform manual labor in hot, humid, or outdoor conditions as required.· • Work safely in environments with fumes, airborne particles, noise, and vibration while wearing proper Personal Protective Equipment (PPE).· • Physically capable of pushing or pulling objects over 100 lbs; lifting up to 70 lbs unassisted to chest height or on stairs; carrying 70 lb pails between work areas.· • Comfortable standing or walking for up to 3 hours, and able to stoop, kneel, crouch, bend, and twist as needed.· • Must have clear vision, including color recognition, depth perception, peripheral vision, and the ability to focus on fine details. E04JI800t97s4083npp

Full-time Description Who we are looking for... We are seeking a CEI Senior Inspector who will be responsible for ensuring that the contractor's work on a project is being completed according to project design specifications and FDOT/Client quality standards, including but not limited to the qualitative and quantitative aspects of construction, accurate measurement and payment of work and the proper documentation of all aspects of construction. A CEI Senior Inspector must also be capable of managing lower-level inspectors. The Senior Inspector will be responsible for performing highly complex technical assignments in field surveying, construction layout, checking engineering computations, inspecting construction work, and conducting field tests and is responsible for coordinating and managing lower-level inspectors. The Senior Inspector is to report field activity and progress to the Project Manager/Administrator through field reports and weekly meetings and in a timely manner. The following duties will be required for this position: Outdoor working environment Safe operation of company vehicle Working on uneven terrain Frequent use of ladders Hauling equipment and materials up to 40lbs Working in inclement weather conditions Working independently Repetitive bending/lifting to include overhead Nighttime and Weekend work hours may be required Working on your feet 8 hours a day Overtime work may be required Field measurements and calculations Requirements High School Diploma/GED 4+ years FDOT experience specific to CEI project activities (soil, concrete, steel, and bridges). Understanding of FDOT construction project administration methods and processes including but not limited to training in MAC, BlueBeam, Hummingbird and Site Manager programs. CTQP Certification in Asphalt, Concrete, Earthwork, pile driving and drilled shafts are required. What you'll need to be successful... Success in this job relies on your time management skills, organization, and positive attitude. In addition, you'll need the following qualifications: Ability to read and interpret construction drawings and specifications, identify discrepancies and/or conflicts, solve problems and develop documentation. Ability to utilize survey equipment to verify field measurements and survey grades during construction, including but not limited to the use of GPS Rovers and Base system, to provide real-time feedback as to whether construction services meet project requirements. Ability to accomplish goals with minimal supervision and provide guidance and direction to staff inspectors. Ability to work as part of a team. Who we are…Trusted Advisors, Creating Community Our firm has assembled a remarkable team encompassing a wide range of experiences and backgrounds. Through collaborative efforts in a supportive environment, we consistently deliver top-notch work of exceptional quality. We prioritize the growth and fulfillment of each team member, providing ample opportunities for professional and personal development. A key factor in this, is our engagement with high-caliber, 'Class-A' projects and esteemed clients. We approach our work with unwavering passion, recognizing the positive impact we have on the communities we serve. ******************************* What we offer… We recognize and reward hard work, we offer a competitive salary, full benefits package, and a potential performance-based bonus. More than four decades ago, England-Thims & Miller, Inc. was founded by three visionaries who wanted to take care of their clients with a focus on boutique, customer-centric, best-in-class services. Today, with the help of over 300, we have built a business around taking care of not only said clients but our communities and team members. What to do next… If England-Thims & Miller, Inc. sounds like the place for you (and if you have the qualifications, drive, and passion to match), we invite you to become a member of our winning team! Once you're part of our ETM family, we'll continue to invest in you as a valuable asset in our company. This job description is representative of typical responsibilities and is not intended to be a complete list of all duties or skills required for the job. It is subject to review and change at any time, with or without notice, in accordance with company needs. ETM is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Benefits: Competitive salary Dental insurance Health insurance Paid time off Vision insurance We are seeking a detail-oriented and experienced HVAC Quality Control Technician to ensure that heating, ventilation, and air conditioning systems meet project specifications, industry standards, and safety regulations. The ideal candidate will be responsible for inspecting HVAC installations, identifying deficiencies, and supporting the project team in delivering high-quality workmanship. Key Responsibilities: Conduct on-site inspections of HVAC installations, including ductwork, piping, equipment, and controls. Verify compliance with mechanical drawings, specifications, codes, and standards (e.g., ASHRAE, SMACNA). Monitor and document all phases of the HVAC installation process to ensure quality and safety. Perform functional tests and commissioning of HVAC systems to verify performance. Generate detailed QC reports, punch lists, and non-conformance notices. Collaborate with project managers, field technicians, and subcontractors to resolve issues. Review installation checklists and ensure accurate completion of documentation. Support internal audits and participate in continuous improvement initiatives. Stay current with changes in codes, regulations, and best practices. Qualifications: High school diploma or GED required; technical certification or associate degree in HVAC or Mechanical Engineering preferred. 3+ years of experience in HVAC installation, service, or quality control. Strong understanding of HVAC systems, codes, and quality standards. Proficiency in reading and interpreting mechanical blueprints and technical documentation. Excellent attention to detail and strong problem-solving skills. Ability to work independently and collaboratively in a field-based environment. Familiarity with quality management systems and reporting tools. OSHA 10 or OSHA 30 certification is a plus. Physical Requirements: Ability to lift up to 50 lbs, climb ladders, and work in confined spaces. Comfortable working in various indoor/outdoor environments. There are many exciting options for a career in HVACR waiting to be explored. If you're looking for a career that offers flexibility, job stability, strong pay, benefits and more, then you've come to the right place!

Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES * Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * Adheres to general work and safety requirements. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records, and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. QUALIFICATIONS * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. * Minimum 5 years' experience working on our Falcon models. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills. * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training * Must be able to climb and lift up to 50lbs. * Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Title: Quality TechnicianJob Description Work directly with the engineering team to develop new operation processes and operate various machines to produce quality parts as instructed. Ensure all operations adhere to company procedures and safety standards, contributing to a clean and efficient work environment. Responsibilities * Operate Electrical Discharge Machine (EDM), waterjet, air flow, and laser machines to produce quality parts as instructed by Operation Process Sheets. * Work with tools such as drill press, belt sander, orbital sander, swivel deburr, bench grinder, and other hand tools according to instructions. * Utilize inspection equipment to ensure product quality. * Complete documentation accurately and correctly scan on/off shop orders. * Utilize and understand operation process sheets and inspect parts per character control sheets. * Notify Supervisor immediately in case of damage, defect, or inability to proceed efficiently. * Collaborate effectively with team members and other departments as needed. * Use approved software and follow company processes and procedures. * Perform all tasks in a safe and reasonable manner according to the company's Employee Handbook. * Maintain a clean and safe work environment and contribute to the company's 6S program and Lean concepts. * Comply with all quality policies, specifications, regulations, and instructions. Essential Skills * Experience with EDM, fusion, and laser machines, with fiber optic laser experience being a plus. * Fusion hole drilling experience. * Ability to work independently or as part of a team. * Strong focus and attention to detail. * Proficiency in mid-level math skills, including working with whole numbers, fractions, and decimals. * Proficiency in using inspection equipment like calipers, micrometers, gage pins, and height gages. * Ability to read blueprints. * Ability to read and follow company processes, policies, and procedures. Additional Skills & Qualifications * Experience with fiber optic laser technology is desirable. Work Environment The role operates in a manufacturing, fabrication, and welding tooling shop environment. The position is for the 2nd shift from 3:30 PM to 12:30 AM, Monday to Friday. The engineering team works from cubicles off of the large, clean, indoor machine shop. Clients are primarily in the aviation and aerospace sectors, focusing on tooling and fabrication of parts. The company promotes a small, family-oriented environment with a team-first mindset. Job Type & Location This is a Permanent position based out of Palm Bay, FL. Pay and Benefits The pay range for this position is $60000.00 - $72000.00/yr. health/dental/vision insurance, 401(k) with company match, life/disability insurance, paid time off (PTO), tuition reimbursement, and wellness programs like counseling/dietitian access Workplace Type This is a fully onsite position in Palm Bay,FL. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

WHO WE ARE Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don't just make parts-we solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. JOB SUMMARY Conducts basic visual and measurement inspection of materials and products for conformance to blueprint specifications. Applies and maintains the company and customer quality standards for industrial processes, materials, and products by performing the following job duties. Shift Hours: 6:30am to 3:00pm Mon-Fri ESSENTIAL DUTIES AND RESPONSIBILITIES * Primary responsibility will be to measure parts with basic measuring instruments for receiving inspection, 100% inspection, and final inspection. Identifies defects or discrepancies and reports them to the Inspection Supervisor as needed. * Understands and observes all necessary safety procedures: safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc. as designated in specific work area assigned. * Work with precision and accuracy of production equipment and testing measurement and facilities. * Follows procedures for nonconformance procedure on both paper and ERP systems. Computes unspecified dimensions and other data like variances as needed. * Required to verify accuracy of basic gauges (i.e. calipers and micrometers, various go and no-go gauges) and reports discrepancies to Inspection Supervisor. * Checks accuracy of parts according to blueprint specifications. Checks parts for measurement of dimensions and tolerances (i.e. GD&T) * Compares product with parts list of sample model to ensure completion of assembly. * Daily use of an ERP system (i.e. Epicor) to perform data entry or inquiry as needed in accordance to established company guidelines. * Rejects defective parts and marks type of defect on proper documentation of paperwork or tag. * Reads blueprint and Job Traveler for such information as dimensions, tolerances, work center outside services and finished operations and number of workpieces to be machined. * Understands and follows Prince quality certifications (i.e. ISO) as relates to position. * Completes all necessary job-related paperwork in a concise and timely manner (such as tags inspection reports.) * Transport the finished materials, manually or using pallet jack, to area indicated in Job Traveler. * Maintains good housekeeping in work area. * Works under direct supervision. * Works effectively with all department personnel and co-workers in a harmonious and cooperative manner to meet the needs and goals established by the company. * May be required to work in the shop on production or work directly with shop personnel as instructed by Inspection Supervisor. * Additional responsibilities as assigned by the supervisor may include department transfers to meet production needs. EDUCATION AND EXPERIENCE * High school diploma or equivalent (GED) preferred. * Previous experience, apprenticeship, or formal training desired. * A minimum of 3 years experience in inspection field. * Demonstrated experience using GD&T principles to measure appropriate gauges for work pieces * Certification in related field strongly desired.

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent (1099 Sub-Contractor) Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)