Quality inspector jobs in Carson City, NV - 40 jobs

Dassault Falcon Jet -Maintenance, Repair and Overhaul (MRO) facility in Reno, Nevada is seeking a full-time Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. Also, providing the approval for return to service with respect to the work performed for work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. Job Duties & Responsibilities: * Responsible to Quality Assurance for quality and airworthiness and may report to Crew Chief for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, makes adjustments and repairs, replaces components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. Requirements * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 3 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment and tools used to perform aircraft maintenance and alterations. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills/ * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training Compensation and Benefits The compensation for this position typically falls between $38 - $50 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime. This position may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

**Job Title:** **QC Inspector - Entry Level** **_Shift Schedule: Day and Swing (Monday - Friday)_** **Start your career in Quality Control!** Are you detail-oriented and ready to learn? Join a leading team in the electronics manufacturing industry as a **QC Inspector** . No prior experience? No problem! We provide training to help you succeed. **What You'll Do:** + Inspect circuit boards and small electrical components for quality and accuracy. + Use tools like microscopes, calipers, and vision systems to check product specifications. + Document inspection results and report any issues. + Work closely with production and engineering teams to maintain top-quality standards. + Keep your work area clean and safe while following company procedures. **What We're Looking For:** + Strong attention to detail and willingness to learn. + Basic computer skills and ability to read/write in English. + Comfortable working in a manufacturing environment. + Ability to read blueprints is a plus (but not required-we'll train you!). **Why You'll Love It Here:** + **Entry-level friendly** - We provide full training! + **Career growth opportunities** - Learn valuable skills in quality control and manufacturing. + **Supportive team environment** - Work with professionals who want you to succeed. **Work Environment:** You'll work in a clean, organized manufacturing setting using advanced tools like microscopes and x-ray systems. Safety and teamwork are our top priorities! **Job Type & Location** This is a Contract to Hire position based out of Carson City, NV. **Pay and Benefits** The pay range for this position is $20.00 - $30.00/hr. **Workplace Type** This is a fully onsite position in Carson City,NV. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Voyager is an innovative defense, national security and space technology company committed to advancing and delivering transformative, mission-critical solutions. We tackle the most complex challenges to unlock new frontiers for human progress, fortify national security, and protect critical assets to lead in the race for technological and operational superiority from ground to space. Forge the Future: Join Voyager Technologies The future belongs to those who build it. At Voyager Technologies, we're building technologies that protect lives, expand frontiers and prepare us for what's next. And we're doing that with people who are wired to solve, build, adapt and lead. These roles are not for the faint of heart. You'll help lay the foundation for humanity's future. Join a culture where innovation thrives, curiosity is rewarded, and impact is real. We're a company of doers, thinkers and builders, united by purpose and grounded in reality. If you want to put your skills to work where the stakes are real and the mission is bigger than any one person, forge the future with Voyager. Job Summary: Working with Voyager means you will be engaging with industry pioneers at a small company that is making big things happen. Voyager seeks positive, innovative, accountable leaders with a business and customer focused mindset. Voyager is seeking a Quality Inspector to support a Department of Defense program. Under the direction of the Director of Quality, this candidate will serve as the primary production inspector with occasional supplier quality engineering support being required. The successful candidate will perform receiving, production floor and supplier component inspections using tools ranging from manual floor inspection tools (e.g., micrometers, calipers, visual, go/no-go gauges, etc.) to computer aided inspection (CAI) methods (e.g., laser scanning, etc.). These inspections may include source inspections at supplier facilities. This candidate will utilize Quality Engineering methods to work with internal manufacturing engineers and suppliers to create and flow down inspection requirements, verify compliance with those requirements, drive corrective actions and ensure continuous improvement with the overall goal of ensuring internal manufacturing and supplier compliance with contractual and technical requirements. They will do this by: • identifying and incorporating appropriate inspection methods and tools into both internal and supplier work instructions and inspection processes required to ensure accurate results • using those methods and tools to inspect and verify compliance with defined pass-fail criteria to include use of manual and CAI equipment • programming inspection equipment (e.g., coordinate measuring machine (CMM), etc.) • collaborating with suppliers and design engineering to develop product designs that mitigate potential defect sources • collaborating with supplier and manufacturing engineering to mitigate potential process defects • leading root cause, corrective and preventive action investigations/ decisions/ validations, actions, integration tasks Responsibilities: Performance of the Supplier Quality Inspector role is inclusive of tasks identified below, with minimal supervision. • Overall Inspection to include: Program, setup and operate CAI, CMM, Keyence and other inspection equipment Use design data to perform first article, in-process & final inspections of supplier “Buy” & internal “Make” items Provide feedback to engineers and suppliers using resultant inspection data Document non-conformance reports as required o Provide inspection time estimates Conduct process and product evaluations and assessments to include inspection cycle time reductions Maintain configuration control of files and job records Support Hardware Acceptance Reviews (HARs) Safely work within an industrial environment • Support Supplier Quality Engineer to include: Support appropriate flow down of program quality requirements to suppliers o Support and conduct supplier source surveillance and inspections Review and ensure successful supplier First Article Inspection Reports (FAIR) • Support Program Quality Engineer to include: Managing business processes to measure and improve quality performance and update/improve departmental procedures as required. Support internal and external audits Experience: Required: • Minimum of ten (10) years of quality inspection experience which includes five (5) years of CMM or other computer aided inspection • Experience supporting Quality for Department of Defense (DoD) programs for the U.S. Government • Experience across various NC tracking systems to include TIP QA or similar tools • Voyager believes in consistent, positive, cooperative, self-motivated professional behavior-we expect all employees to contribute as necessary to get the job done. • This job is part of Operations, which is comprised of Quality, Safety, Supply Chain and Manufacturing and requires an individual with experience partnering with the program manager, program quality engineer, supplier quality engineer, program planner/scheduler, control account managers and other program team members to achieve program objectives. • This job requires an individual with excellent interpersonal communication skills (both spoken and written) to include communications with suppliers, program teams, company management, business partners, and customers. • Unless otherwise stated in the requirements section of an individual , our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC1324b(a)(3). Preferred: • Experience working Missile Defense Agency programs with MAP/PMAP requirements • Experience with AS9100 and DCMA standards • Demonstrated expertise in lean and six sigma principles Education: Required: • Associate's Degree in a STEM (Science, Technology, Engineering or Mathematics) field, or equivalent experience Preferred: • Bachelor's or Master's Degree in a STEM (Science, Technology, Engineering or Mathematics) field Please click “Apply” to submit your application. Voyager offers a comprehensive, total compensation package, which includes competitive salary, a discretionary annual bonus plan, paid time off (PTO), a comprehensive health benefit package, retirement savings, wellness program, and various other benefits. When you join our team, you're not just an employee; you become part of a dynamic community dedicated to innovation and excellence. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Voyager is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Minority/Female/Disabled/Veteran The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice. Nevada pay range$90,000-$115,000 USD

As a QC Inspector at Rocket EMS, you will play a vital role in ensuring that our high-reliability PCB assemblies adhere to the strictest quality standards. Your responsibilities will include conducting first article inspections, performing in-process audits, and monitoring production quality along the SMT line. This position demands meticulous attention to detail, a solid understanding of IPC standards, and the decisiveness to halt production when quality is jeopardized. Responsibilities Review job documentation (MPI, Deviations, ECOs, and Customer Requirements) prior to inspection. Conduct SMT First Article Inspections and verify compliance with IPC-A-610 (Class 2 and 3) and customer standards. Monitor throughput and quality on assigned lines; halt production if significant defects are identified and escalate issues promptly. Provide daily quality pass-down reports and keep leads/supervisors informed about inspection outcomes. Initiate and review Technical Inquiries for discrepancies; ensure no jobs commence without proper authorization. Assist in addressing bottleneck areas as directed by Supervisor, Engineer, or Manager. Escalate unresolved issues to the Quality Manager. Adhere to and enforce all procedures related to ESD, MSD handling, housekeeping, maintenance, safety, and inspection protocols. Propose and support continuous process and quality improvements. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years in an electronics inspection role within a contract manufacturing or similar environment. IPC-A-610 and/or J-STD-001 certification (required). Skills Strong understanding of IPC workmanship standards (Class 2 and 3). Ability to read and interpret blueprints, drawings, and BOMs. Basic computer skills (MS Word, Excel, Outlook). Excellent communication skills in English, both written and verbal. Detail-oriented with the capability to accurately identify and classify defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Growth opportunities in a cutting-edge electronics manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed

Now hiring! QA/QC Technician I Sparks,GA. We are looking for a QA/QC Technician to join our Agricultural Solutions team in Sparks,GA. Come create chemistry with us! BASF's Agricultural Solutions division connects innovation, customers, partners and agricultural experts and integrates sustainability criteria into all business decisions. We help farmers deliver the best possible outcomes, working to achieve the balance between economic, environmental, and social value creation for sustainable and efficient agriculture. The QC Laboratory Technician ensures the quality of products by performing physical and chemical analyses of raw materials, in-process and finished products in support of the manufacturing process. This position requires schedule flexibility to assist with vacation coverage of other team members when necessary (including some weekends and holidays) as well as some early-morning training responsibilities During your shift as a QA/QC Technician I, you will * Analyze routine raw material, in-process, and finished good samples using various laboratory techniques including High Performance Liquid Chromatography (HPLC), Gas Chromatography (GC) and other methodology such as particle size analyzer, density meter, viscometer, etc. * Provide timely and accurate documentation of all analytical data according to Standard Operation Procedures (SOP) * Escalate Out-of-Spec materials to QC Lab Supervisor for data review. * Aid in management of inventory of consumables such as HPLC columns, spare parts, reference standards, and control samples. * Complete routine troubleshooting and maintenance of laboratory equipment. * Identify and implement process improvement in laboratory functions. * Strict adherence to established quality, safety and environmental standards is required * Handle and maintaine Hazardous and Nonhazardous Waste from Lab testing and Equipment per the site guidelines. If you have... * High School Diploma with a minimum of 4 years laboratory experience or 2 years chromatography experience or Bachelors Degree (BS) (Chemistry or related science field) with minimum 2 years lab experience. * Strong math skills. * Strong computer skills including proficiency in Microsoft Word and Excel. * Strong knowledge of analytical techniques, understanding of proper chemical handling, use, storage and disposal. * Experience with Gas Chromatography (GC) * Experience with Liquid Chromatography-Mass Spectroscopy (LCMS). * Must be able to work a rotating shift that includes days, nights, weekends, and holidays. Create your own chemistry with you@BASF At BASF, you will have the chance to do meaningful work towards building a more sustainable future. In addition to competitive compensation and benefits, BASF provides you with access to a wide range of elements to help you be your best. It's what we call you@BASF. We are committed to providing benefits, programs, and opportunities that support our employees' overall well-being, personal growth, and a safe, collaborative, and inclusive work environment. Just some of the many benefits we offer include: * Flexible work arrangements whenever possible * Highly competitive retirement savings plan with company match and investment options * Well-being programs that include comprehensive mental health support for you and your household family members * Family forming benefits (fertility, adoption and surrogacy reimbursement, maternity/parental leave, and more) * Back-up child and elder care with discount programs for families of all ages and stages * Mentoring and career development opportunities that allow you to share, learn, and thrive * Matching gifts program that allows you to deepen the impact of your contributions to qualified charities. * Employee crisis support for when the unexpected happens * Access to our BASF wine cellar, employee discounts, and much more! About us As one of the largest chemical companies in North America we have been finding solutions for your everyday needs and addressing the most complex economic, environmental, and sustainability challenges for more than 150 years! At BASF we empower our employees with the tools, guidance and opportunities they need to advance and succeed in work and life. Giving you the support you need to be your best and fulfill your personal ambitions is what helps us create chemistry. After all, our success is linked to yours. Whatever path you envision, BASF is a great place to build a rewarding, successful career. Belong to Something Bigger. #belongat BASF Privacy statement BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ***************************** to report fraud. Pay transparency BASF is committed to pay transparency practices. The competitive [pay range/starting wage] for this role is $xxx - $xxx. Actual pay will be determined based on education, certifications, experience, and other job-related factors permitted by law. Equal employment opportunities We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

Job Description Quality Inspector Job Summary Quality Inspectors perform various sorting, inspection, production, and data capture. Quality Inspectors work in partnership with our customers to contain and improve quality issues the most efficient way possible. Our vision is to be the Leading Global Provider of Premium Inspection and Quality Assurance Services. We create an atmosphere where we recognize the individual, work together to solve problems, and foster an environment for employee growth. Quality Inspectors work in manufacturing plants, warehouses or other locations where our customers parts are being produced or stored. The location may vary day to day depending on the needs of our customers. Teams work collectively to ensure that we are responsive, accountable, and accurate in all aspects of our work. It's important and our people are key to our continued success. Quality Inspector Job Responsibilities & Duties Performs various sorting, inspection, production, and data entry Reads and follows work instructions, work rules and directions Maintains organization and cleanliness of work area Uses inspection, measuring and test equipment as required Completes required training classes Follows all employee policies and other duties as assigned Quality Inspector Job Qualifications & Skills Flexibility and adaptability Positive attitude and self-motivated Detail orientated

American Battery Technology Company (ABTC) is an industry-leading battery metals and critical material technology development and commercialization company. Our Pilot Plant just outside of Reno, Nevada will be the first integrated implementation of our multi-step processing train for the full mechanical processing, physical separation, chemical extraction, and production of commercial-scale battery metals that will be resold back into the battery manufacturing supply chain to enact a low-cost, low environmental impact, and domestically sourced closed-loop circular economy. We are seeking a highly motivated and detail-oriented Quality Technician to join our Li-ion battery recycling operation. This critical role reports directly to the Head of Quality and plays a vital part in ensuring the safety, quality, and efficiency of our battery disassembly, processing, and finished product quality. This position is for our D-shift staff, working nights, Thursday through Saturday, and every other Wednesday.

General Description: The QA/QC Inspector plans and conducts activities concerned with the quality assurance of industrial processes, materials, and products by performing the following duties. The QA/QC Inspector will represent ACCO and its subcontractors for pipe and equipment installation, welding inspection and oversight of subcontractor installation and quality. The QA/QC Inspector will participate in the General Contractors project quality program documenting installation activities. Supervises: None Essential Duties & Responsibilities Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of assigned product or component. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Reviews all purchased products or components and provides input to the decision of whether the product has been vetted by ACCO for future purchases from the vendor. Documents data obtained during all quality assurance activities, consistent with company policies, codes and procedures. Communicates significant issues or developments identified during quality assurance activities and provides recommended process improvements to management. Prepares reports to communicate involvement and results of quality assurance activities. Maintains a working knowledge of codes and specifications for current industry quality standards. The quality team may assign other duties. Secondary Duties / Responsibilities: Develops new approaches to solve problems identified during quality assurance activities. Prepares and presents technical information and reports to team members and management. Directs technical and administrative workers engaged in quality assurance activities. Other duties as assigned by the Site QC Supervisor or QA/QC Director in conjunction with the project team. Position Requirements (Skills, Work Experience, Education, Certifications, Licenses, etc.): To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Seeking at least 5 years of experience in Quality Control with a minimum of 3 years focused on ASME B31 piping codes, industrial and commercial construction, fabrication, welding, non-destructive testing, and/or other similar fields. Current certification in accordance with AWS QC-1 as a Certified Welding Inspector (CWI) and /or ICC Mechanical - Commercial Certification preferred. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Regular & routine attendance. ACCO Competencies: Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Insight: The ability to gather and make sense of information that suggests new possibilities. Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility and shows personal humility. Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change. Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. Physical Requirements: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds Specific vision abilities required by this job includes Jaeger (J1) vision annually. Regularly required to walk, climb stairs, sit, stoop, kneel, crouch, or crawl Hours: This is a non-exempt position from Monday through Friday, with one-hour break for lunch and two rest breaks. Travel: Based on business needs to and from the primary office to regional branch offices & job sites. Varying work in varying locations.

At Nox Group, we are dedicated to humanizing construction as one of the fastest-growing industrial enterprises in the US. Nox Group owns and operates Corbins, RMCI, Nox Innovations, and Construction Labels, and our teams set the standard as industry leaders. As we continue to expand our reach nationwide, we seek people who are passionate about personal growth and eager to make a positive impact throughout the industries and communities we serve. We prioritize our people, our partners, and our relationships. Start your journey today and join our skilled team. We are currently seeking a Quality Technician to support our QAQC Department team in Reno, Nevada. As a Quality Technician, you will play an essential role in ensuring our installations comply with National and City codes, customer design specifications, and Corbins' expectation of “First Class Work”. You will be supporting the most challenging and exciting projects in the Southwest, including commercial, industrial, mission-critical and water/wastewater treatment facilities. Responsibilities Develop an understanding of the electrical project scope, quality requirements, quality plan, and quality documents pertaining to the assigned scope of work including applicable codes and standards. Coordinate with operations to schedule and perform quality inspections and tests to maintain production goals. Prepare inspection/test reports and maintain the quality files related to area of responsibility. Verify inspection and test compliance with applicable contract documents, codes, and standards. Correctly interpret and utilize codes and industry standards to determine compliance of the work. Assist the project team with completion of required test documentation. Organize quality documents and store per the company and project document management procedures. Identify, report, and correct nonconforming work in accordance with the company quality standards and the Project Quality Plan. Perform receiving inspection of permanent materials and plant equipment for project requirements as needed. Be involved in and provide quality input to task planning meetings. Examine/inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed. Identify safety hazards you or other employees may be subject to and take all necessary corrective actions to eliminate or minimize hazards. Understand and respond appropriately to all safety hazards and warning devices (i.e. back-up alarms, smell of smoke, different colored warning tags, warning sirens) Understand and implement lockout/tagout procedures in safe manner. Qualifications 5+ years working in the industrial electrical industry. Experience maintaining effective communications (both orally and written) with supervisor, coworkers, and the project management team. Experience developing strong working relationship with supervisor, coworkers, and the project management team. Electrical code and standards knowledge Strong attention to detail and follow-through. Proficient in Microsoft Office software (Word, Excel, Outlook) Must be a self-starter, be organized, and have good interpersonal skills. Ability to complete tasks with minimal supervision. Ability to lift up to fifty pounds, unassisted, as required. Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary. Able to work a 40-hour work week, with overtime and off-hour shifts as required. Ability for stand for long periods of time in one place. Ability to walk jobsites throughout the day. Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location. Education/Certifications High school diploma or equivalent. Trade Certificate or college degree in education preferred or equivalent experience in construction training and development. Safety Level This is a safety sensitive position, and all applicable policies including drug test and background check will apply. The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to: Potentially lift up to 50 pounds Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing Potentially operate a motor vehicle, crane, tractor, etc. We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA) #NXCLIND1 It has been and continues to be the long-standing policy of any Nox Group operating company to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. In addition to federal law requirements, Nox Group and all of its subsidiaries comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

The Quality Technician performs quality control tests/inspections on products at various stages of production process. Duties require verbal and written communication ability, visual acuity to product detail, manual coordination to operate hand tools and testing equipment, ability to enter data in computer system and the physical ability to lift various weights. Essential Job Functions Performs quality check of printed, laminated and slit roll samples and pouches on a regular basis to verify Operator's result for dimension. Operates quality control testing equipment/tools. Collects and manages sample retained. Collaborate with Operator and Production Supervisor in ensuring product conformance during job set up for approval to run. Respond and assist Production and/or Quality Supervisor in verifying reported non-conformities for quick resolution or corrective action. Communicate deviation incidents to concerned personnel for corrective action. Place non-conforming raw materials, WIP & Finished products ON HOLD/Quarantine on Radius, update the Quality Log and communicate to concerned personnel. Assist Quality Supervisor in sampling and verification of internally quarantined and customer returned non-conforming materials to identify proper disposition. Generates and issues Certificate of Analysis directly to customer or save in the system. Communicates discrepancies of production documentations (WI, SOP, Layout, etc.) to Management and CSR for timely correction. Prints quality forms for production personnel if needed. Read and replies to e-mails in timely manner. Cooperate in the maintenance, cleanliness and organization of the Laboratory. Cooperate during root cause analysis to identify proper corrective & preventive action. Assist in collection, preparation and review of customer required samples. Perform filing of quality documents/records. Assist with team members with their responsibilities as needed or during their absence. Attend team meetings and feedback on any quality related issues/improvements. Assist in employee trainings, if required. Follow all established safety rules and regulations and utilize required safety equipment. Report defective equipment or unsafe conditions to the appropriate personnel. Maintain work area in a clean and orderly condition. Follow all company Good Manufacturing Practices & Policies. Perform other duties as required or as requested by Supervisor or Manager. Ability to work a flexible schedule if needed. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Skills and Knowledge Technical or vocational degree is a plus. Able to consistently act independently and prioritize work. Practical interpersonal and written communication skills Experience with ERP and other Maintenance Planning tools. Strong analytical and problem-solving skills Strong sense of ownership, work ethic, good judgment, and decision-making skills Familiar with Microsoft Office (Word, and Excel). Able to work in a fast-paced environment and multi-task effectively. Excellent organizational and prioritization skills. Excited about taking on new challenges in the manufacturing industry Self-motivated, hands-on, practical mindset, and capable of setting and reaching ambitious goals. Ability to work as part of a team and independently. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Physical Requirements: While performing the duties of this job, the employee is regularly required to stand, walk, sit, and use hands to handle or feel. The employee frequently is required to talk or hear. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The noise level in the work environment is usually loud. Period lifting of pallets weight and material weighing up to 50lbs Squatting, crouching, turning, twisting, stretching, climbing steps, grabbing, pulling, pushing, and bending. Visual and hearing acuity within normal limits Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical environment of manufacturing and production facilities. Exposure includes but is not limited to continuous noise, scent of materials, bright workstations, machinery with moving parts. Other Details: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. It is the responsibility of all Employees to ensure that the product produced by Garlock Flexibles meets or exceeds the expectations for quality of Garlock Flexibles and their Customers. It is also the responsibility of all employees to ensure that the Hygiene of their work area meets or exceeds the standards set in Garlock Flexibles Good Manufacturing Practices Manual. 3rd Shift Sun-Thurs 11pm-7am 40 hours a week/Overtime as needed

The Opportunity: Elemental LED is a leading U.S. based engineering and technology company that creates, develops, manufactures, markets and sells innovative, configured and integrated LED lighting solutions. The Economic Development Authority of Western Nevada (EDAWN) has awarded Elemental LED as the "Company of the Year-Large" at the 7th Annual EDAWN Existing Awards event and "Employees First - Large" at the 10th Annual EDAWN Existing Industry Awards event. Job Description What You Get To Do: The Quality Assurance Technician I supports all quality-related activities of the Quality department to maintain quality assurance of all manufactured and purchased products to achieve product excellence, continuous process improvement, and customer satisfaction. We are looking to hire a Full-Time Quality Assurance Technician I. The core hours for this position will be Monday - Friday, 8:00 AM - 4:30 PM. The pay range is $22.50 - $24.00/hour. Challenge Yourself - The Specifics: Conduct in-process inspections, verifying that all documents and builds meet assembly requirements utilizing Prints, BOMs, and Standard Operating Procedures (SOP's) Verifies correct product, labeling, markings, quantity, dimensional, visual, and documentation, and inputs data for historical reference using the product database, and reports issues to Quality leadership Compares the physical characteristics of products to technical specifications to identify defects Conducts tests on electrical function, reliability, and packaging quality; record results Reports non-conforming material issues to Quality and Production leadership so necessary adjustments, reworks, and dispositions can be put in place Interact and collaborate well with members of other departments, such as Production, Product Management, and Engineering, to improve quality methods and system processes which will result in a positive influence and impact on the overall quality of our products and services Qualifications You Have a Unique Combination of Skills, Talents and Mindset, Including Many of the Following: High school diploma or GED and one (1) year of relevant experience or equivalent experience and training are required Ability to safely use various metrology tools equipment including but not limited to, calipers, handheld photometer, and a multimeter for purposes of evaluating product conformance Ability to strategize, plan, organize, prioritize, and execute a variety of multiple tasks in an effective and timely manner: organize own work, set priorities, and meet critical time deadlines Work with low voltage electricity Knowledge of quality best practices that can be applied in the company's environment, preferred Knowledge of principles and practices of continuous improvement, ISO regulations a plus, preferred Knowledge of LED's, LED drivers, controls, basic lighting terminology, photometry, and applications, preferred Knowledge of test equipment including multimeters, calipers, and handheld photometers, preferred Operate and maintain modern office equipment, including computer equipment and specialized software applications programs Use tact, initiative, prudence, and independent judgment within general policy, procedural, and safety guidelines Effectively communicate in person, over the telephone, and in writing in English Additional Information All your information will be kept confidential according to EEO guidelines. The Perks and Benefits: Medical, Dental, Vision, Life/AD&D, Short Term and Long Term Disability Insurance (100% PAID by employer), available first of the month, following the date of hire Company-matched 401(k) Plan, at 5%, no vesting schedule Paid Time Off (PTO) Volunteer Time Off (VTO) Three Paid Flexible Holiday per year Seven Paid Holidays Pre-Tax Flexible Spending Accounts (FSA) Career Development Plan Program Discounted Corporate Gym Membership at South Reno Athletic Club Tuition Assistance Employee Discount Monthly Birthday Lunch Celebrations On-site Snacks and Beverages Employee Referral Bonus Program About Us: Visit us at ******************** or call ************. All your information will be kept confidential according to EEO guidelines.

Company Overview Hamilton Medical was founded in 1983 with a clear mission: to enhance the lives of patients on respirators and support the caregivers who serve them. Our focus is on developing ventilation technologies that prioritize safety, effectiveness, and lung protection. We are dedicated to easing the burden on healthcare professionals who work tirelessly every day, helping critically ill patients recover and regain their health. We are committed to helping medical teams deliver the best respiratory care ‑ to anyone, anywhere. Responsibilities Hamilton Medical is seeking a Quality Assurance Technician who will work with the Quality and manufacturing teams to support the production of medical equipment. This position is available during the swing shift: 3:30pm - 12:00am. Perform dimensional and visual inspections of various precision mechanical and electronic parts. Utilize appropriate measurement tools for assigned tasks. Generate and maintain inspection documents and files, clearly documenting inspection results, including resolutions and discrepancies. Assist Engineers in identifying and troubleshooting discrepant materials. Qualifications Thorough knowledge of good manufacturing practices. Strong technical skills. Excellent communication and documentation skills. Ability to follow written instructions accurately. Work seamlessly with peer group. Knowledge of basic quality assurance methods and principle. Education/Experience Must have a High School Diploma or GED; an Associate degree in Electronics, Biomedical Electronics Technology, or a certificate from an accredited electronics school is preferred, or an equivalent combination of education and experience. At least 1 year of quality assurance experience. About Hamilton Established, stable, and reliable company. Comprehensive benefits package: medical, dental, vision insurance; paid vacation and sick time; disability insurance; 401(k); tuition reimbursement; and more. Engaging and innovative design projects. Strong opportunities for professional growth. Commitment to sustainable design practices. Personal Protective Equipment (PPE) may be required (provided by employer). Drug and background screenings required. Equal Employment Opportunity - It is the policy of this organization to provide equal employment opportunities to all qualified applicants without regard to race, creed, color, national origin, sex, age 40 and over, disability, marital status, sexual orientation, gender identity, genetic information, citizenship status, religious preference, or veteran status in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations.

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI's to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer's suppliers' location. The SI will travel to these locations. Job Functions: Experienced quality individual in dimensional and visual inspection of aerospace machined components Experience in performing FAI's - AS9102 (The SI will verify supplier's FAI, not perform them) Experience with hand measurement tools Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required) Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection) Other duties as assigned KNOWLEDGE, SKILLS AND ABILITIES Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process (Knowledge of CMM Programming is not required) Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection) MS Outlook, and EXCEL experience Mechanical inspection experience preferred IPC, J-STD, and Mil-Spec inspection experience preferred. Such as IPC-600 or IPC-610 Skills: Strong verbal, written and communication skills Fluent English - reading and writing is required Professionalism, integrity, and exceptional attention to detail Strong independent decision-making skills; excellent analytical skills and professional judgment Excellent interpersonal, written, and verbal communication skills Knowledge of basic computer skills, include basic Excel skills - must pass Excel test Ability to: Work as an effective team member Establish and maintain effective working relationships Fluent English - reading and writing is required Pass pre-hire background check including DMV and credit screening Pass Pre-hire Drug Screening The work is performed under general supervision Valid drivers' license and auto insurance required U.S. Citizenship required Preferred Education and Skills (including certifications): 3+ years' experience as a quality inspector, technician, or engineer. 3+ years' experience in an aerospace manufacturing facility 3+ years' experience in inspection duties, FAI's GD&T, and b/p interpretation Proficient with Microsoft Outlook and Excel Effective communication skills Detail oriented Any combination of education and experience may be considered Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem-solving a plus WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday - Friday from 8:00 a.m. - 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: 12 days paid vacation first year, increasing with service years 10 days paid sick time 11 paid holidays Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Champ Plan Wellness and Health Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings Participation increases net take home pay $$$ in most instances Free wellness initiatives Free tele-health Free and discounted RX Auto enrollment (unless tax elections result in negative impact) Eligible on the 1st of the month following 30 days of continuous employment requires monthly 10-minute wellness activity participation 401k retirement savings with match Eligible on the first (1st) of the month following 90 days of continuous employment 100% match of 1st 3% contribution 50% match of next 2% contribution IMMEDIATE VESTING Company-provided cell phone, laptop, mobile wi-fi (for business use only) Regular Hourly rate for travel time Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 $1500 EMPLOYEE REFERRAL BONUS Initial $750 paid upon hire of qualified referred employee (rehires excluded) Additional $750 paid upon referral's full completion of 90 days' employment Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo's team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR f5lmdhd55E

Job Description Performs Inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to work performed for the work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Assurance Inspector may also perform aircraft maintenance (including Inspections), preventative maintenance and alterations and assist customers with technical and operational support relative to the customer's aircraft. Job Duties & Responsibilities Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality. Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data. Maintains complete knowledge of the work scope of assigned aircraft Determines airworthiness requirements for aircraft undergoing inspection (reference FAR 43.15) Verifies inspection program is applicable to assigned aircraft Performs conformity inspections for certification projects Supports import/export airworthiness approval Verifies technical data acceptable to and/or approved by the FAA, has been used to provide inspection and approval for return to service with respect to work performed Insures corrective action(s) provides for complete correction of discrepancy Provide(s) record(s) of major repairs and alterations (reference FAA 337) Provides maintenance record entries with respect to work performed Contributes to a positive work environment while maintaining the utmost level of professionalism at all times. Able and willing to mentor others. Works assigned shift and unscheduled overtime as-needed or requested. Ability to travel and perform AOG maintenance. Regularly communicates directly with customers and vendors. Excellent written and verbal communication skills. Maintains a clean and organized work area at all times and adheres to company dress standards. Perform all other duties as assigned to support the efficient operation of the department and company. Qualifications High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs. FAA Airframe and Powerplant certificate required 5+ years experience in aircraft maintenance and alteration of turbine aircraft preferred Experience with the methods, practices, techniques, aids, equipment and tools used to perform aircraft maintenance and alterations. Required Thoroughly familiar with the applicable regulations and proficient in the use of the various inspection methods, practices, techniques, aids, equipment and tools appropriate for the work being performed and approved for return to service. Required Specific working knowledge of FAR 43, FAR 145, FAR 91. Intermediate computer skills. FAA Inspection Authorization (IA) preferred. Previous FAR Part 135 Experience (Including RTS) preferred. Previous FAR 91.411 & 91.413 Experience preferred. Previous Avionics Installation / Check-Out Experience preferred. Working Conditions Office environment Possible hangar and ramp environments with variable temperature range Physical Requirements Ability to wear and utilize personal protective equipment Must be able to lift up to 50 pounds without assistance Must be able to lift and carry up to 100 pounds with assistance Comfortable in tightly enclosed areas, heights involving lifts and ladders, as well as, flying. Requires the ability to perform all physical functions of the job (hear, stand, kneel, walk, etc.) Compensation and Benefits The compensation for this position typically falls between $42 and $57 per hour. This position is eligible for overtime. This position may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description As a QC Inspector at Rocket EMS, you will play a vital role in ensuring that our high-reliability PCB assemblies adhere to the strictest quality standards. Your responsibilities will include conducting first article inspections, performing in-process audits, and monitoring production quality along the SMT line. This position demands meticulous attention to detail, a solid understanding of IPC standards, and the decisiveness to halt production when quality is jeopardized. Responsibilities Review job documentation (MPI, Deviations, ECOs, and Customer Requirements) prior to inspection. Conduct SMT First Article Inspections and verify compliance with IPC-A-610 (Class 2 and 3) and customer standards. Monitor throughput and quality on assigned lines; halt production if significant defects are identified and escalate issues promptly. Provide daily quality pass-down reports and keep leads/supervisors informed about inspection outcomes. Initiate and review Technical Inquiries for discrepancies; ensure no jobs commence without proper authorization. Assist in addressing bottleneck areas as directed by Supervisor, Engineer, or Manager. Escalate unresolved issues to the Quality Manager. Adhere to and enforce all procedures related to ESD, MSD handling, housekeeping, maintenance, safety, and inspection protocols. Propose and support continuous process and quality improvements. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years in an electronics inspection role within a contract manufacturing or similar environment. IPC-A-610 and/or J-STD-001 certification (required). Skills Strong understanding of IPC workmanship standards (Class 2 and 3). Ability to read and interpret blueprints, drawings, and BOMs. Basic computer skills (MS Word, Excel, Outlook). Excellent communication skills in English, both written and verbal. Detail-oriented with the capability to accurately identify and classify defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Growth opportunities in a cutting-edge electronics manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed

**Job Title: QC Inspector** **About the Role** Are you detail-oriented and passionate about quality? As a **QC Inspector** , you'll play a critical role in ensuring the integrity and performance of our electronic products. You'll inspect circuit boards and small electrical components using advanced tools and techniques, helping us maintain the highest standards of quality and reliability. This is more than just a job-it's a chance to be part of a collaborative team that values precision, innovation, and continuous improvement. We are currently hiring for both **day and swing shifts** , offering flexibility to fit your lifestyle. **Key Responsibilities** + Perform **visual and mechanical inspections** of components and finished products. + Utilize tools such as **microscopes, calipers, x-ray systems, and vision systems** to verify product specifications. + Accurately **document inspection results** and report non-conformances. + Collaborate with **production and engineering teams** to resolve quality issues and improve processes. + Maintain a **clean, organized, and safe work environment** in compliance with company standards. + Follow **standard operating procedures (SOPs)** and quality control guidelines. + Meet **daily production targets** and support throughput goals. + Participate in training programs covering **ESD, safety, first article inspection, IPC-A-610 standards** , and more. **What You Bring** + Proven experience in **quality control and assurance** within a manufacturing setting. + Proficiency in **inspection techniques** and use of measurement tools. + Ability to **read and interpret blueprints, drawings, and bills of materials** . + Strong **attention to detail** and commitment to accuracy. + Basic **computer skills** and ability to document findings clearly. + Effective **communication skills** in English (written and verbal). + Experience with **microscope-based visual inspections** . **Why Join Us?** + Be part of a **supportive and skilled team** that values your contributions. + Work in a **clean, safe, and well-equipped facility** with cutting-edge tools. + Enjoy **opportunities for professional growth** , training, and advancement. + Make a real impact by helping deliver **high-quality products** to global customers. + Choose a shift that fits your schedule- **day and swing shifts available** . **Work Environment** You'll thrive in a fast-paced, hands-on manufacturing environment where safety, precision, and teamwork are key. Our culture encourages continuous learning and improvement, and we're committed to helping you succeed. **Job Type & Location** This is a Contract to Hire position based out of Carson City, NV. **Pay and Benefits** The pay range for this position is $20.00 - $21.50/hr. **Workplace Type** This is a fully onsite position in Carson City,NV. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description American Battery Technology Company (ABTC) is an industry-leading battery metals and critical material technology development and commercialization company. Our Pilot Plant just outside of Reno, Nevada will be the first integrated implementation of our multi-step processing train for the full mechanical processing, physical separation, chemical extraction, and production of commercial-scale battery metals that will be resold back into the battery manufacturing supply chain to enact a low-cost, low environmental impact, and domestically sourced closed-loop circular economy. We are seeking a highly motivated and detail-oriented Quality Technician to join our Li-ion battery recycling operation. This critical role reports directly to the Head of Quality and plays a vital part in ensuring the safety, quality, and efficiency of our battery disassembly, processing, and finished product quality. This position is for our D-shift staff, working nights, Thursday through Saturday, and every other Wednesday. Requirements Experience: Proven professional experience (2+ years) in a quality control, technician, or related technical role, preferably within a manufacturing, recycling, or complex technical environment. Battery Expertise: Direct hands-on experience with Li-ion battery technology, including familiarity with common battery pack and module architectures. Mechanical Fluency: Demonstrated mechanical aptitude and proficiency in using a variety of hand tools for precise disassembly, inspection, and maintenance tasks. Documentation & Communication: Excellent written communication skills, with experience in technical writing, including the creation and maintenance of SOPs, work instructions, and quality reports. Attention to Detail: Meticulous approach to recording data, performing inspections, and accurately executing product sampling protocols. Responsibilities In-Process Quality Control & Sampling: Execute routine sampling and testing of recycled products (e.g., black mass, metal fractions) generated by the recycling operation multiple times per day. Document and report all test results, non-conformances, and material inconsistencies accurately. Disassembly Inspection & Assurance: Conduct in-depth mechanical disassembly and inspection of battery packs and modules, requiring proficient use of various hand and power tools (e.g., wrenches, sockets, multimeters). Perform visual, dimensional, and functional quality inspections on incoming Li-ion battery packs and modules to ensure non-conforming material does not enter our recycling process. Work closely with production personnel during the disassembly process to verify adherence to quality and safety standards. Procedure Development & Documentation: Collaborate with production and engineering teams to develop and write clear, concise Standard Operating Procedures (SOPs) for safe Li-ion battery disassembly and initial processing steps. Maintain and update quality records, inspection logs, and documentation systems in compliance with quality management standards. Safety & Compliance: Support and enforce strict adherence to quality management systems and internal safety standards. Crucially, a strong preference will be given to candidates with knowledge of Li-ion battery electrical safety protocols and high-voltage handling best practices. Nice-to-Have Knowledge of high-voltage electrical safety standards and procedures relevant to Li-ion batteries (e.g., NFPA 70E, OSHA guidelines). Experience utilizing analytical equipment for material testing or quality assurance in a manufacturing or recycling environment. Relevant technical certification or associate's degree (e.g., Electrical Technology, Mechanical Technology, or Quality Assurance). Benefits Competitive Pay Company-sponsored health, dental, vision, and life insurance Parental Leave Company-sponsored Employee Assistance Program Stock options 401(K) Paid time off Monthly phone stipend Equal Opportunity Employer American Battery Technology Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Americans With Disabilities Act American Battery Technology Company does not discriminate based upon disability in its hiring or employment practices and complies with the ADA title I employment regulations. If you need assistance or an accommodation due to a disability or a special need, please contact Human Resources.

The Quality Technician performs quality control tests/inspections on products at various stages of production process. Duties require verbal and written communication ability, visual acuity to product detail, manual coordination to operate hand tools and testing equipment, ability to enter data in computer system and the physical ability to lift various weights. Essential Job Functions Performs quality check of printed, laminated and slit roll samples and pouches on a regular basis to verify Operator's result for dimension. Operates quality control testing equipment/tools. Collects and manages sample retained. Collaborate with Operator and Production Supervisor in ensuring product conformance during job set up for approval to run. Respond and assist Production and/or Quality Supervisor in verifying reported non-conformities for quick resolution or corrective action. Communicate deviation incidents to concerned personnel for corrective action. Place non-conforming raw materials, WIP & Finished products ON HOLD/Quarantine on Radius, update the Quality Log and communicate to concerned personnel. Assist Quality Supervisor in sampling and verification of internally quarantined and customer returned non-conforming materials to identify proper disposition. Generates and issues Certificate of Analysis directly to customer or save in the system. Communicates discrepancies of production documentations (WI, SOP, Layout, etc.) to Management and CSR for timely correction. Prints quality forms for production personnel if needed. Read and replies to e-mails in timely manner. Cooperate in the maintenance, cleanliness and organization of the Laboratory. Cooperate during root cause analysis to identify proper corrective & preventive action. Assist in collection, preparation and review of customer required samples. Perform filing of quality documents/records. Assist with team members with their responsibilities as needed or during their absence. Attend team meetings and feedback on any quality related issues/improvements. Assist in employee trainings, if required. Follow all established safety rules and regulations and utilize required safety equipment. Report defective equipment or unsafe conditions to the appropriate personnel. Maintain work area in a clean and orderly condition. Follow all company Good Manufacturing Practices & Policies. Perform other duties as required or as requested by Supervisor or Manager. Ability to work a flexible schedule if needed. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Skills and Knowledge Technical or vocational degree is a plus. Able to consistently act independently and prioritize work. Practical interpersonal and written communication skills Experience with ERP and other Maintenance Planning tools. Strong analytical and problem-solving skills Strong sense of ownership, work ethic, good judgment, and decision-making skills Familiar with Microsoft Office (Word, and Excel). Able to work in a fast-paced environment and multi-task effectively. Excellent organizational and prioritization skills. Excited about taking on new challenges in the manufacturing industry Self-motivated, hands-on, practical mindset, and capable of setting and reaching ambitious goals. Ability to work as part of a team and independently. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Physical Requirements: While performing the duties of this job, the employee is regularly required to stand, walk, sit, and use hands to handle or feel. The employee frequently is required to talk or hear. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The noise level in the work environment is usually loud. Period lifting of pallets weight and material weighing up to 50lbs Squatting, crouching, turning, twisting, stretching, climbing steps, grabbing, pulling, pushing, and bending. Visual and hearing acuity within normal limits Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical environment of manufacturing and production facilities. Exposure includes but is not limited to continuous noise, scent of materials, bright workstations, machinery with moving parts. Other Details: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. It is the responsibility of all Employees to ensure that the product produced by Garlock Flexibles meets or exceeds the expectations for quality of Garlock Flexibles and their Customers. It is also the responsibility of all employees to ensure that the Hygiene of their work area meets or exceeds the standards set in Garlock Flexibles Good Manufacturing Practices Manual. 3rd Shift Sun-Thurs 11pm-7am 40 hours a week/Overtime as needed

Under the direction of the Quality Engineer the Quality Technician is responsible to assist the Quality Engineer with communication and resolution of Customer Concerns, Internal Audits/Control Plan Audits, launch activities, PPAP studies and related activities, and gauge maintenance. It is also the duty of the Quality Technician to drive containment actions to ensure that the quality and integrity of the product shipping to our customers is maintained. Responsibilities/Duties: Assist the Quality Engineers with communication of Quality Concerns to all shifts of the production team. This includes but is not limited to ensuring that quality alerts are posted, training has been completed and operators and all production team members have a firm understanding of the intent and expectation of the alert The Quality Technician should aid Quality Inspectors in making a decision to accept/reject product. In the absence of the Quality Engineer, the Quality Technician has the authority to determine the acceptability of a part based on the documented requirements for the program, visual aids and knowledge of part history. When a decision is made, a sample part should be saved and provided to the Quality Engineer to make a new boundary sample. If a decision cannot be made, it is the responsibility of the Quality Technician to elevate the issue to the Quality Manager. The Quality Manager will consult with the Production Manager and Engineering Manager to make a final determination and give feedback to the team. Assist production personnel with the coordination of all sort activities including the gathering of data and communication back to the Quality Manager and all appropriate members of management Maintain organization of all non-production samples and nonconforming material It is the responsibility of the Quality Technician to communicate any and all quality, reliability or system concerns up the chain of command to drive resolution. This includes reporting all findings from sorts, first off/periodic inspections, quality audits, general observation, etc. Organize/Oversee sorts related to customer or internal concerns. Train all personnel performing a sort, collect all sort data and provide feedback to Quality, Production and Engineering on sort findings. Maintain all gauges for cleanliness and timely certification including the contracting of outside resources as needed SG-FO-621-002 It is the user's responsibility to verify latest revision. REV. 11-01-18 Verify the availability and usefulness of visual aids and boundary samples/standards. Work with Quality Engineer to develop new samples where needed Train all Manufacturing operators and Supervisors (all affected personnel) on Quality Alerts. Provide completed training documents to the responsible Quality Engineer. Ensure the intent of the Quality Alert is understood and verify required actions are in place. Work with Quality Engineer for clarification of requirements where needed. Ensure all Quality Alerts are up to date, current and posted at the point of use Perform internal audits and control plan audits as determined by the Internal Audit schedule Assist Quality Engineer by performing and coordinating the performance of Capability Studies and Gauge R&R's Assist the Quality Engineer in gathering data for internal trials and run at rates. Oversee the activities of Quality Inspectors. The Quality Technician will be required to maintain in-person contact with each shift quality inspector Comply with safety regulations and maintain clean and orderly work areas (5S) Follow all clean up and housekeeping procedures (5S) i.e. production floor, shipping & receiving office and warehouse as needed Ability to communicate and understand verbal and written instructions in English Perform other duties as assigned or required Specific Knowledge, Skills, Licenses, Certifications, Etc: High school diploma/GED Minimum of one year experience in Quality Able to read part drawings/GD&T Working knowledge of Gauge R&R's and SPC methodologies People skills and the ability to relate to all levels of employees and management Knowledge in the use of Microsoft Word, Excel and Power Point Ability to work flexible hours Physical Requirements: Must be able to lift and move objects up to 35 pounds. Must be able to hear, talk, walk, stand, bend and sit, use hands to finger, handle, or touch office equipment and production environment such as gages & fixtures Vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus to work