Quality inspector jobs in Corpus Christi, TX - 1,389 jobs

A Construction Quality Inspector at Butler-Cohen supports commercial and industrial construction projects by assisting with inspections, documentation, and coordination to ensure installed work meets Butler-Cohen standards, project specifications, and industry best practices. This is an ideal role for individuals seeking hands-on experience and opportunity for growth in quality assurance. Responsibilities Assist with scheduled inspections to verify/identify compliance with plans, specifications, and safety standards. Collaborate with superintendents and project managers to understand project specifications, goals, and timelines. Assist with quality control, site safety initiatives, and coordination of trade partners as delegated by the project superintendent. Interpret and review design drawings, specifications, and other technical documents for project related QAQC requirements/criteria. Report any safety incidents or violations. Coordinate with various stakeholders, including architects, contractors, and subcontractors on layout discrepancies between drawings, in field work, and existing conditions. Compare material deliveries with approved product data submittals and shop drawings for compliance. Inspect materials delivered to the job for quantity, quality, and condition and report on missing and/or damaged items. Conduct quality assurance inspections and audits, reporting any non-conformance issues and documenting as observations. Ensure that all relevant construction documents are available on-site for reference. Participate in preparatory phase and coordination meetings to understand subcontractor mean and methods for compliance with specifications and industry best practices. Work closely with project teams to resolve issues that may impact quality and integrity of installed work. Maintain clear and open communication by providing regular updates on progress, challenges, and resolutions between the construction site and project management. Education/Experience Required Bachelor of Science in Construction or 2 year's experience performing quality assurance related tasks and responsibilities. Skills/Abilities Required Basic understanding of construction principles, practices, and techniques. Good communication and interpersonal skills. Proficiency in using construction management software, Microsoft office suite, and relevant reporting tools. Knowledge of safety regulations and best practices in the construction industry. Able to access entire jobsite including stairs, scaffolding, ladders, elevation changes, etc. Can work in physical positions including kneeling, sitting, standing, squatting, bending over, etc. Must be able to travel to job sites Must be able to move, carry, or position items weighing up to 50 pounds The ability to establish and maintain a positive and professional working relationship with individuals at all levels of the company including client representatives and subcontractors. Must have the ability to work flexible hours including weekends. Able to work in all elements of the outdoor environment which include the heat, cold, rain, snow, wind, etc.

Who We Are: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law.

We Are Artificial Lift. It's what we do. All day. Everyday. Flowco is redefining well “optimization” with the very latest in USA manufactured gas lift and plunger lift technologies and delivering unrivaled customer support wherever and whenever you need it. We are seeking a QUALITY ASSURANCE INSPECTOR (2nd Shift) to become an integral part of our team! This position is located in FORT WORTH, TEXAS. Job Summary : Preserve the quality standards of products by the inspection of incoming materials, in-process work, finished products, and recording the quality results Responsibilities may include, but are not limited to: Read blueprints and use inspection equipment Inspect, test, or measure materials or products being produced (primarily machined parts) Inspection and measuring equipment calibration duties (machine shop related equipment) Develop and conduct various inspections on inbound materials from suppliers and outbound internally made products (machined parts and assemblies) Ensure that the quality check procedure in place are followed during every manufacturing phase Create comprehensive documentation for quality issues and document the corrective actions that were taken Educate the manufacturing team on quality control issues and work with departmental supervisors to improve overall product quality Create process checklists and coordinate quality inspections with departmental supervisors Required : High School Diploma/GED Required : 2-year minimum QA experience Preferred : 5-year minimum QA experience Preferred : Valid & Current CWI certification (welding inspection) Preferred : Valid & Current CWI certification (welding inspection) Preferred : Oil & Gas product/material/manufacturing industry experience Preferred : Experience with component/assembly inspection Must be able to lift up to 75lbs Must be able to stand for 8+ hours per shift Must be able to read, give, and take direction in English Must be able to work full time and have great attendance Must pass drug screen & background check Must have excellent communication skills Must be detailed oriented, have basic math skills and computer skills Must have a courteous and positive attitude, also have a sense of urgency, drive, pride, and desire to succeed Will be working in a shop environment Well versed at analyzing information, reporting investigation results, and have solid documentation skills Performs tasks associated with the quality control inspection of various products while meeting productivity, quality, safety, behavioral, and attendance expectations Experience with inspecting parts made in a machine shop and the typical inspection equipment typically used to inspect machined parts. 3+ experience using CMM machine is a plus. NO RECRUITERS/HEADHUNTERS/STAFFING AGENCIES Unsolicited emails or calls will not be read or returned

We are looking for a Quality Control Lead Inspector for one of our top clients in Fort Worth, TX. . Bilingual in English and Spanish is required. Hours: First Shift. Compensation: $22.00 per hour Responsibilities: Supervise, train, and mentor a team of garment inspectors, ensuring they perform their duties efficiently and accurately. Oversee the inspection process, ensuring that garments meet the required specifications for quality. Identify any defects or issues with garments and work with PI teams to resolve them promptly. Maintain accurate records of inspection results, defects, and corrective actions taken. Ensure all inspections are conducted in accordance with established quality standards and company expectations. Collaborate with the production and WH teams to address quality concerns and implement solutions. Identify and escalate any significant quality issues or potential risks to immediate supervisor / manager. Participate in continuous improvement initiatives to enhance the inspection process and overall product quality. Requirements: Prior experience as a Garment Inspector, Quality Control Inspector, or similar role in the garment manufacturing industry required. Bilingual in English and Spanish required. Experience in textile factories or weaving companies required. Strong knowledge of garment production processes and quality standards. Proven leadership and team management skills. Excellent analytical and problem-solving abilities. Basic computer skills for record-keeping and reporting (Words, Excel, Power Point).

Job Posting Start Date 12-23-2025 Job Posting End Date 02-27-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Quality Control Inspector located in Dallas, Texas. Reporting to the Quality Assurance Manager, the Quality Control Inspector is responsible for providing quality control and assurance throughout all phases of the production process, with a focus on mechanical and wiring. Other phases include inspections of raw materials, in-process, and final products. Products and materials are related to switchgear, relay panels, substation enclosers, sheet metal, welding, paint and other components. Shift: 6:00 AM - 2:30 PM Responsibilities: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Verifies and documents the condition and count of all items unloaded from trucks and trailers; checks against suppliers count and immediately reports discrepancies. Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Documents corrective action requests and inputs data into corrective action database. Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned Qualifications: High School Diploma or equivalent 1-3 years' experience of quality inspections in fabrication/manufacturing environment, particularly in welding Thorough understanding of the product and/or process being inspected (welding) Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Demonstrated proficiency with the ability to safely operate powered equipment (forklift, reach truck, etc.) Proficient in Microsoft Physical Requirements: Prolonged periods standing and performing repetitive tasks. Must be able to lift push and/or pull up to 50 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections. Must be able to traverse production facility to conduct inspections. Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a Petroleum Inspector to join our Caleb Brett team, on site, at our Corpus Christi facility. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award-winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector, a valued member of our Inspection team, is responsible for performing an array of measurement testing of clients' commodities and cargo and reporting those test results to management. Shift/Schedule: Rotating Shifts and Hours, including nights, weekends, holidays, and on-call hours Salary & Benefits Information In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, barges, and ships. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges, and ships. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges, and ships. Perform routine equipment calibrations, verification, and function checks. Verify and communicate the results obtained and to make the entries into the appropriate media. Provide on the job assistance and receive training from more experienced inspectors. To communicate and coordinate with terminal, transport, and Company personnel to promote smooth exercise of duties assigned. To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. To perform routine equipment calibration, verification, and function checks. To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. To maintain work areas, records, and equipment in a clean, organized, and functional condition. To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Ability to work varying shifts , hours, and on-call basis. Cannot have a fear of heights. Ability to climb ladders and stairs for shore tanks. Experience with Verifying and communicating results obtained and to make the entries into the appropriate media *Valid driver's license and reliable driving record (required) Ability to acquire and maintain a Transportation Worker Identification Credential (TWIC). Always Model Intertek's 10X Energies within the workplace, practicing business the right way. Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Must be detailed oriented and able to effectively prioritize and organize workload with efficient time management. Ability to travel as business needs dictate. Physical requirements to include Lifting, walking, standing, reaching, bending, stooping, climbing, squatting, and driving. Preferred Requirements & Qualifications: Experience with Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, barges, and ships. Experience with Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges, and ships. Experience with Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges, and ships. Experience with Performing routine equipment calibrations, verification, and function checks. IFIA certified is a plus!

Job Title: Distribution Inspector Level 3Location: El Paso, TXDuration: Long TermDescription:· Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. · Work shall be performed in accordance with Company standards and 49 CFR 192· Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications:· Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on poly fusion projects. · Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, TVC, and ONE MAP. · CPWI· API 1169· Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. · Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Quality Control Inspector - Hot Tap & Line Stop Fittings/Equipment is responsible for ensuring that all Hot Tap and Line Stop fittings, equipment, and materials meet company and customer quality requirements before deployment to the field. This position plays a key role in maintaining product integrity, ensuring compliance with quality standards, and supporting operational readiness at the service facility. Key Responsibilities: Incoming Inspection: Inspect and verify incoming materials, fittings, and components for conformance to purchase order requirements, drawings, and specifications. Ensure all materials have proper documentation (MTRs, Certificates of Conformance, NDE reports, etc.). Tag, label, and record material traceability information in accordance with quality procedures. Verify Equipment used in the field is maintained and within acceptance requirements. In-Process Inspection: Perform in-process inspections during assembly, setup, and testing of Hot Tap and Line Stop equipment. Inspect Pressure Testing Equipment prior to and during testing to verify cleanliness, correct setup, proper calibration, and pressure ratings. Monitor test operations to ensure test parameters and safety requirements are being followed. Verify that test data and results are properly recorded and meet acceptance criteria. Document any nonconformances identified during in-process checks and coordinate corrective actions with Operations and Quality. Outgoing Equipment Verification: Inspect and verify that equipment and fittings going out to the field match the order and job requirements (size, rating, configuration, material, and accessories). Check that correct documentation (drawings, pressure test reports, assembly sheets, inspection records, etc.) is included with each fitting before dispatch. Coordinate with Operations and Field Technicians to resolve discrepancies prior to release. Maintenance and Calibration Compliance: Verify that all tools, pressure equipment, and service components are maintained and calibrated per the established maintenance program and schedule. Ensure maintenance frequency compliance and recordkeeping. Inventory Condition Control: Conduct periodic inspections of fittings, seals, and other components in inventory to confirm they are in good condition and properly stored. Pay special attention to sealing elements-ensure proper traceability, shelf-life control, and ventilation/storage conditions are maintained. Identify and segregate damaged or expired items for review and disposition. Documentation and Recordkeeping: Maintain accurate inspection records, reports, and traceability logs. Verify completeness and accuracy of job packets and ensure all required documentation accompanies fittings and equipment to the field. Support continuous improvement initiatives and assist in nonconformance investigations as needed. Qualifications Qualifications: High school diploma or equivalent (technical degree preferred). Minimum 2-3 years of experience in Quality Control, preferably in pipeline equipment, pressure fittings, or mechanical fabrication/service environment. Working knowledge of Hot Tap and Line Stop systems preferred. Familiarity with inspection tools, dimensional verification, and material traceability requirements. Basic understanding of ASME, API, or similar applicable codes and standards. Proficient in reading and interpreting engineering drawings and MTRs. Strong attention to detail, organizational skills, and ability to work independently. Physical and Work Environment Requirements: Work performed in a service facility and warehouse environment. Requires walking, standing, bending, and occasional lifting of items up to 50 lbs. May involve limited field visits for inspection or verification purposes. Key Competencies: Attention to Detail - Ensures accuracy and completeness in inspections and documentation. Accountability - Takes ownership of quality and reliability of outgoing equipment. Communication - Works effectively with Operations, Quality, and Field teams. Organization - Maintains systematic records and traceability. Technical Proficiency - Understands fitting components, materials, and sealing requirements

"This posting is part of our ongoing talent pipeline and is not tied to an active opening; qualified candidates will be contacted when the role officially becomes available." ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. * Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures * Ensuring Compliance with Procedures * Dealing with Coworkers/Clients/Public JOB DUTIES: Responsibilities may include, but are not limited to: * Monitoring and reporting on COMBS warehouse supply procedures. * Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. * Investigate and submit items for warranty claims when required. * Accomplishing forms and documentation reviews as required. * Advises management on revising inspection/receiving regulations, as required, to meet contractual requirements. * Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to be damaged when received. * Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. * Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. * Accomplishing site training for new personnel and assisting with training records maintenance. * Monitor and maintain tool calibration and assist with GSB maintenance as needed. * Setting up and maintaining the Technical Library. * Performing QEC installation inspections. * Cleaning of warehouse, shops, offices and restroom as required. * Clerical and other assigned duties as required. QUALIFICATIONS: * Knowledge, Skills, and Abilities (Required Skills include the ability to:) * Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). * Thorough knowledge of warehouse shipping and receiving procedures. * Ability to communicate effectively, both orally and in writing. * Ability to deal courteously with the customer. * Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. * Education and Experience: * Valid FAA Airframe and Powerplant Certificate. * Graduation from a standard four (4) year high school or equivalent (GED) AND a Minimum of FIVE years' recent experience in aircraft maintenance. * Documented proof of aircraft mechanic experience. Benefits include the following: * Healthcare coverage * Retirement Plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

“This posting is part of our ongoing talent pipeline and is not tied to an active opening; qualified candidates will be contacted when the role officially becomes available.” ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures Ensuring Compliance with Procedures Dealing with Coworkers/Clients/Public JOB DUTIES: Responsibilities may include, but are not limited to: Monitoring and reporting on COMBS warehouse supply procedures. Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. Investigate and submit items for warranty claims when required. Accomplishing forms and documentation reviews as required. Advises management on revising inspection/receiving regulations, as required, to meet contractual requirements. Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to be damaged when received. Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. Accomplishing site training for new personnel and assisting with training records maintenance. Monitor and maintain tool calibration and assist with GSB maintenance as needed. Setting up and maintaining the Technical Library. Performing QEC installation inspections. Cleaning of warehouse, shops, offices and restroom as required. Clerical and other assigned duties as required. QUALIFICATIONS: Knowledge, Skills, and Abilities (Required Skills include the ability to:) Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). Thorough knowledge of warehouse shipping and receiving procedures. Ability to communicate effectively, both orally and in writing. Ability to deal courteously with the customer. Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. Education and Experience: Valid FAA Airframe and Powerplant Certificate. Graduation from a standard four (4) year high school or equivalent (GED) AND a Minimum of FIVE years' recent experience in aircraft maintenance. Documented proof of aircraft mechanic experience. Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

_"This posting is part of our ongoing talent pipeline and is not tied to an active opening; qualified candidates will be contacted when the role officially becomes available."_ **ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures + Ensuring Compliance with Procedures + Dealing with Coworkers/Clients/Public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Monitoring and reporting on COMBS warehouse supply procedures. + Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. + Investigate and submit items for warranty claims when required. + Accomplishing forms and documentation **reviews as required.** + **Advises** management on revising inspection/receiving regulations, _as_ required, to meet contractual requirements. + Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to **be damaged when received.** + Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. + Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. + Accomplishing site training for new personnel and assisting with training records maintenance. + Monitor and maintain tool calibration and assist with GSB maintenance as needed. + Setting _up_ and maintaining the Technical Library. + Performing QEC installation inspections. + Cleaning of warehouse, shops, offices and restroom as required. + Clerical and other assigned duties as required. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities** (Required Skills include the ability to:) + Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). + Thorough knowledge of warehouse shipping and receiving procedures. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. + **Education and Experience:** + Valid FAA Airframe and Powerplant Certificate. + Graduation from a standard four (4) year high school or equivalent (GED) **AND** a Minimum of **FIVE** years' recent experience in aircraft maintenance. + Documented proof of aircraft mechanic experience. **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Travel: 50% - 70% SUMMARY: Oil and Petroleum Inspectors visit client facilities, including barges and ships, shore tanks, railcars, and tank trucks for quantity surveys of a variety of commodities including petroleum and petrochemicals inspection and collects samples for laboratory analysis. ESSENTIAL DUTIES AND RESPONSIBILITIES: Include the following: Other duties may be assigned. Maintain a Valid Drivers License and a working vehicle (car or truck, no motorcycles) at all times * Receives orders, obtains information, and gathers paperwork from Operations Supervisor(s) on movements. * Ensures that all equipment is in good operating condition - calibration verification, correct and clean. This includes safety and monitoring equipment appropriate to the job. * Reports to job-site punctually and observes all applicable company federal and state regulations and standards, Terminal, Refinery, and/or vessel requirements, including safety and measurement standards. * Attends "Key Meetings" with external personnel ashore and/or abroad. Represents the Company by appearance and conduct. Behaves ethically at all times. * Communicates any problems, discrepancies, or other noteworthy incidents to the Operations Supervisor and/or Dispatcher without delay * Obtains samples, gauges shore tanks, vessel(s), barge(s), railcar(s), and/or tank truck(s) as specified per job order. * Labels sample containers with full and correct identifying data, including location of sample, material, type of sample, safety information, time collected, etc. * Promptly and accurately calculates quantities and completes all required paperwork and distributes copies appropriately. * Promptly and safely delivers samples to the laboratory for analysis or turn in for retain, or client facilities for analysis or retain.

Job Description BULL MOOSE TUBE COMPANY, a progressive organization in the manufacture of steel tubular products, is looking for an energetic, customer-focused Quality Control Technician who wants to become a key contributor in an industrial manufacturing environment. Bull Moose Tube is currently one of the largest and most profitable manufacturers of mechanical tubes, fire suppression sprinkler pipe, and hollow section structural steel tube. We currently generate approximately $0.6 Billion in revenue and operate from eight strategically located North American manufacturing sites with headquarters near St. Louis, Missouri. This Quality Control Technician opening will be located in our Sinton, Texas plant. ESSENTIAL JOB RESPONSIBILITIES: Oversee all quality issues with tube. Test tube per customer specifications. Perform physical testing as required. Investigate and assist in the resolution of MTR or product quality issues. Generate report for outside testing and prepare samples for shipment. Review results from outside lab and process accordingly. Print and review mill schedules to identify key quality requirements. Perform product inspection on mill and in warehouse as required. Review system held warehouses and address product issues where necessary. Initiate CAR's to address non-conforming material/policy, procedure violations. Review held material inventories. Maintain calibration system. Audit production to verify adherence to applicable specifications and customer requirements. Audit facility to verify compliance to QMS system. Preparing reports and maintaining appropriate filing system. Provide support to Managers and Supervisors. Assisting in daily office needs. Backup for of vacations and absenteeism. Other duties required to meet company needs. REQUIREMENTS: Able to understand and effectively use computerized business systems and other technology and business platforms. Ability to build, develop and motivate teams/co-workers; work cooperatively with others to ensure constructive and productive business relationships. Ability to engage in cross-functional collaboration. Ability to effectively participate in and facilitate group meetings. Self-motivated and driven. Able to maintain regular and reliable attendance and to comply with all Company policies and procedures. QUALIFICATIONS: High School Diploma or equivalent. Prior manufacturing experience. Machine operating skills; ability to learn and comprehend machine operation. QMS experience preferred. This job posting does not comprise an exhaustive list of all functions that this employee may be required to perform; the employee may be required to perform additional duties/functions as assigned. Bull Moose Tube (BMT) and its affiliated companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Job Posted by ApplicantPro

**Requisition ID:** 179269 **Job Level:** Internship **Home District/Group:** Kiewit Quality **Department:** Quality **Market:** Corporate Home Office **Employment Type:** Full Time Temporary Our Quality Team is seeking driven individuals with a passion for continuous improvement and a commitment to excellence in the construction industry. If you value doing things right the first time and believe quality matters more than quantity, this internship is a great opportunity to launch your career. At Kiewit, our mission is to make a meaningful impact through our construction operations. Whether it's tunneling through mountains, harnessing river energy, or building bridges that connect communities, we rely on skilled, safety-focused professionals to deliver exceptional results. Bring your ideas, dedication to quality, and strong work ethic. In return, we offer exciting career and travel opportunities, along with the satisfaction of building something extraordinary. **District Overview** Kiewit delivers engineering, procurement, installation, and construction services across multiple industries. We are committed to meeting project requirements and upholding corporate quality standards. Our core objective is to exceed client expectations and eliminate rework by doing the job right the first time. **Location** Kiewit's culture is built around mobility and opportunity. We relocate teams based on project needs, individual development plans, skill sets, and career goals. Your journey with Kiewit will be tailored to align with both your aspirations and our business needs. **Responsibilities** + Maintain a strong understanding of company standards and guidelines + Track and analyze client critique schedules an trends + Communicate client feedback to employees + Manage Corrective Action Reports and facilitate Root Cause Analysis + Stay current on District Quality Manuals + Identify and mitigate potential quality issues + Participate in standards meetings and contribute quality-related insights + Understand ISO 9001 requirements + Assist with planning and conducting internal quality audits + Review documentation, interview staff, and administer audit assessments + Provide administrative support for audits and other quality initiatives + Deliver quality presentations and share updates via internal channels + Mentor Project Quality Coordinators + Develop and maintain Project Quality Plans and associated metrics **Qualifications** + Willingness to travel and relocate (25%-50%) + Pursuing a degree in construction management, engineering, welding technology, or a related field + Familiarity with construction-related quality control procedures preferred + Certifications such as ASQ, CQM, CQA, or CWI are a plus + Ability to access all areas of a construction site in varying conditions + Highly motivated with a strong initiative and commitment to excellence + Strong work ethic and integrity + Passion for safety and a commitment to ensuring a safe work environment + Excellent interpersonal, written, and verbal communication skills + Ability to work independently and collaboratively to meet goals + Strong organizational and time management skills with attention to detail \#LI-CA1 Other Requirements: - Regular, reliable attendance - Work productively and meet deadlines timely - Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment - Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. - Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. - May work at various different locations and conditions may vary. Base Compensation: $15.00/hr - $23.00/hr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) This posting will be active from: 01/13/2026 - 06/01/2026 We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

Amarillo Gear Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. SCOPE: The Tool Specialist will provide assistance with CNC machine tooling (tool bodies, inserts, endmills, grinding wheels, etc.) and hand tooling (wrenches, hardware, etc.) for the manufacturing plant. They will be responsible for organizing, inventorying, and repairing tooling in the tool crib, ordering special tooling, sending off tooling to be repaired, setting up and maintaining tool setup package carts for various work-centers, and assisting with part changeover at various CNC machines. They will work with different departments to improve production flow and on-time delivery throughout the entire manufacturing plant. EDUCATION REQUIREMENTS/ EXERIENCE: * 2+ years of hands-on programming experience preferred * Ability to write and understand machine code preferred * Inventory experience * Be comfortable in a fast-paced environment * Some experience with CAD/CAM software, such as Autodesk Fusion * Strong communication and documentation skills, with the ability to communicate with machinists on machine processes * Highly proficient in Microsoft Office (Excel, Word, Access, PowerPoint, etc.) * Mathematically inclined RESPONSIBILITIES: * Ensure each CNC machine has all the tooling required to manufacture various parts ahead of time to help production flow smoothly through the shop. * Coordinate tool tests with the CNC Programmer and report CNC programming changes that need to be made to improve tool life and part quality. * Clean up extra unused tooling at each work-center and inventory it to be sharpened or reused. * Set up tool packages for CNC machine changeovers to ensure CNC operators have all tooling they need to perform quick changeovers. * Inventory current tooling used at work-centers (such as custom-made boring heads) to help identify where spare tooling will be required to help production flow. * Assist the CNC operators in part changeover duties in pit-crew style changeovers to help the changeover go quicker and smoother. * Help complete program changes/transfers when CNC Programmer needs support. * Perform other duties, as assigned. REQUIRED PHYSICAL DEMANDS: * Standing for more than 1 hour, walking more than 100 ft., reach above, at or below shoulders, climb stairs, bend, stoop, and/or squat, grasping, hand/wrist twisting, lifting of up to 50lbs. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Day Schedule: 6 on / 3 off ( 12hr shifts).

AMERISPEC INSPECTION SERVICES IS INTERESTED IN HIRING THE NEXT GREAT INSPECTORS IN EAST TEXAS & LOUISIANA! Do you have what it takes to be that person? AmeriSpec Inspection Services is looking to hire Full Time Professional Inspectors. About AmeriSpec: We are a family owned and locally operated company that provides quality inspection services for our clients here in East Texas and Louisiana. We are committed to providing our staff the training, knowledge, and tools needed to be successful in the field while providing the excellent service that our clients demand. Essential Duties and Responsibilities: include the following. This position independently completes home inspections and ancillary services from start to finish. Other duties may be assigned. Attend annual regional AmeriSpec conferences Experience in Remediation, Water Damage, Trades, and/or an allied craft a plus Experience in writing protocols a plus Valid Driver's License and clean driving record Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Willingness to maintain records and communicate with Marketing Manager and Office Manager about job tasks Willingness to perform onsite educational seminars for real estate agents and other local professionals Willingness to comply with the State of Texas and governing agencies for licenses held Willingness to comply with the State of Louisiana Home Inspector Laws & Regulations and gain licensing in that state Perform other related duties as assigned Assist in marketing efforts as directed by a Marketing Representative Possess good communication skills and good computer skills Develop and maintain alliances with successful area real estate agents Work closely with Owner and/or Senior Inspectors to learn the essentials of Commercial & Home Inspections along with Mold Assessments and Protocols Independently perform home inspections from start to finish Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with little to no supervision. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's Degree or equivalent from four-year college or technical school; or six months to one year experience as an AmeriSpec Associate Inspector; Completion of state requirements by an approved TREC provider; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: Must be TREC licensed and willing to be licensed in the State of Louisiana Must comply with applicable state licensure requirements and continuing education Must be willing to receive ongoing training and licensing for our ancillary services that we offer Other Skills and Abilities: Good communication skills Ability to work independently Ability to learn new information Ability to learn new skills Relationship building Time management Organizational skills Mentoring and coaching skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is also regularly required to talk and/or listen. The employee is frequently required to stand, to walk, and to reach with hands and arms. The employee is occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl and to smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; risk of electrical shock and risk of radiation. The noise level in the work environment is usually moderate. Travel: This position requires extended periods of travel time, to and from job locations and areas where continuing education may be required. Inspectors are required to maintain cleanliness of personal vehicles at all times. Fuel expenses will be reimbursed. Benefits Career Advancement Opportunities Flexible Scheduling Great Work Environment Sick Time, PTO, and Health Benefits Plan AmeriSpec Inspection Services is an Equal Opportunity Employer Compensation: $20.00 - $24.00 per hour AmeriSpec offers the best training in the industry by combining classroom instruction, in-field inspections and hands-on technical training in our state-of-the-art facility, led by instructors with over 30 years of experience. A replica of a home, as well as a host of training aids such as a roof, water heater, plumbing, electrical panel and appliances are utilized during training. It is specifically designed for AmeriSpec business owners and inspectors and illustrates what to examine when performing a quality home inspection. Parts of the house are fully functional, such as the kitchen and indoor lighting. In addition, used water heaters, furnaces, and air conditioning units are brought into the classroom, giving inspectors the opportunity to examine these important home systems and components. This innovative facility includes a combustion safety simulator/residential pressure diagnostic tool. This provides AmeriSpec business owners and inspectors with the training needed to make them the best in the industry. Interested in a career with AmeriSpec? Please review our open positions using the filters above. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to AmeriSpec Corporate.