Quality inspector jobs in Corvallis, OR - 20 jobs

Primary Purpose: The Wax Assembly Inspector inspects completed molds to ensure they meet technique card and Quality requirements. The Inspector provides respectful and constructive feedback to the team on a regular basis in an effort to make the whole team better. Duties and Responsibilities: * Visually inspects completed assemblies to technique card and SOP requirements and provides feedback to operator, trainer, and assembler as requested * Recognizes, understands cause, and repairs defects in wax patterns as requested * Meets and maintains quality requirements while maintaining production standards * Is accountable to self and rest of team by demonstrating quality workmanship with minimal rework by using and following standard work practices. * Understands the goal of Zero Wax defects and demonstrates ownership in the role * Maintains work station and equipment in a clean, safe and orderly manner, sweeps, scraps floor area daily and performs weekly 5-S * Respectfully takes direction from coordinator, lead, trainer, and supervisor * Other duties as required such as cleaning, assembly, kitting, hanging molds, etc… Minimum Qualifications and Experience: * Must be able to communicate fact based constructive feedback respectfully to improve our quality at individual and team level * Must have completed all Assembly level I training competencies (wax cleaning) or be able to within roughly a month of starting * All training competencies completed from Assembly level II preferred * At least one year of highly detailed relatable inspection experience will be considered in lieu of Assembly level II experience * Must be able to demonstrate highly detailed aptitude for inspection within first week * Able to follow written instructions such as tech cards, routers, PCP's, and SOPs * Requires continuous mental and/or visual attention to detail * Able to use small hand tools throughout the day to clean wax molds * Able to use and understand measuring tools such as a ruler * Good attendance record required * Must be able to maintain quantity requirements while maintaining quality requirements. * Able to work as a team player and be self-motivated. * Able to understand and follow verbal instructions from trainer or supervisor. * HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. * Must be at least 18 years of age. * Solid job history including more than 1 year at previous or recent employer. * Must be able to lift up to 50 lbs with or without reasonable accommodations. * Must be willing to undergo a pre-employment background check. * Must be willing to participate in pre-employment and periodic drug screening. Environment: * The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: * Weekend day shift * Overtime offered based on business needs Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: *********************** CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a full time position

Job DescriptionDescription: Ascentec Engineering is hiring! We are seeking an Aerospace Quality Inspector for our Dallas, Oregon location. This is a critical position within the company and presents a great opportunity for someone to provide final assurance to all our valued customers that the precision machined parts they are being provided are of the highest level of quality possible. This position is on-site (not remote/not hybrid) at our Dallas, Oregon location and is not eligible for Visa sponsorship or transfer of Visa sponsorship. Requirements: JOB RESPONSIBILITIES: To include but not limited to the following: Receiving, In-process and Final inspections Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T Basic experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. Visual Product Inspections - Surface Cosmetics of Plated/Painted and bare material parts Experience with operating manual and/or automated CMM a plus Generate Clear and concise Non-conformance Reports Able to work overtime Preference will be given to candidates with prior machinist experience PERSONAL QUALIFICATIONS: Self-Starter / Self-Motivated / Flexible / Detail Oriented Reliable and dependable Positive customer focused attitude Enjoys fast pace and rapidly changing environment Honest with stellar integrity Professional demeanor and respectful to people in all situations Flexible and willing to help others as needs and tasks change often Team player COMPENSATION / BENEFITS: • $18 to $21 per hour DOE • PTO and paid holidays • Medical/Dental/Vision Coverage • Short- and long-term disability coverage • 401K with matching funds Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

**This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.** **Further your career at Ball, a world leader in manufacturing sustainable aluminum packaging. Achieve extraordinary things when you join our team, and make a difference in your professional development, the community, and around the globe!** **Ball is thrilled to receive Newsweek's 2023 Top 100 Global Most Loved Workplace award! As a sustainable product leader, we have over 16,000 global team members. From endlessly recyclable aluminum cans, and cups, to aerosol bottles, our goal is to contribute to a better community, society, and world.** **Exciting News from Ball Corporation!** Were thrilled to announce that a **brand-new location is coming to Millersburg, OR** and with it, some incredible career opportunities! As we begin building our presence in the area, were also kicking off recruitment efforts to bring top talent on board. If youre looking for a fresh opportunity with a company committed to innovation and excellence, nows the time to apply! **Position Overview:** As a **_Quality Assurance Technician_** , you play a critical role in ensuring that aluminum can products meet established quality and food safety standards. Your responsibilities include advising production teams on quality compliance, conducting inspections, and analyzing data to identify trends and drive continuous improvement. By minimizing quality-related downtime and ensuring compliance with industry regulations, you enhance overall production efficiency and product integrity. **Competencies:** + Quality Control and Inspections: expertise in conducting through product inspections to ensure compliance with quality standards and specifications + Effective Communication: ability to effectively communicate with cross-functional stakeholders, providing constructive feedback to team members and facilitation collaboration + Equipment Troubleshooting and Maintenance: proficiency in performing basic troubleshooting and maintenance of inspection equipment to maintain operation efficiency + Process Optimization and Standardization: skilled in implementing Statistical Process Control (SPC) techniques to improve production efficiency and standardization + Data Analysis & Continuous Improvement: strong analytical skills to interpret date, identity trends, and drive process enhancements for better production outcomes + Regulatory Compliance: in-depth understanding of quality standards and systems (e.g., ISO), ensuring adherence to regulatory and internal compliance requirements **Skills:** + Basic troubleshooting, ability to identify and resolve common mechanical and graphics issues in the production process to minimize downtime + Mechanical aptitude, understanding of mechanical systems and tools, enabling efficient handling and maintenance of machinery + Flexibility in Production roles, flexibility to switch between different tasks and roles, ensuring smooth workflow and responsiveness to production needs + Routine Equipment Operation, competence in operating standard manufacturing equipment, adhering to safety protocols, and maintaining consistent production quality + Quality Standards and Systems Knowledge, familiarity with quality management system (e.g., ISO), supporting compliance and continuous improvement initiatives + Problem-Solving Skills, experience with root cause analysis tools and ability to recommend corrective and preventive actions to address quality issues **Accountabilities:** + Statistical Process Control (SPC) Data Analytics, analyze SPC system data to identify trends, perform root causes analysis,escalate decisions,and provide insights for continuous improvement + Inspection Equipment Maintenance, perform basic troubleshooting and maintenance of inspection equipment to ensure operational efficiency and reliability + Quality Decision-Making, make informed decisions on releasing or holding products for inspection during shifts, maintaining product quality standards + Collaboration with Production Teams, work closely with production teams to implement control plans and address quality issues effectively + Food Safety Compliance, ensure adherence to food safety standards and certifications, leading and coordination food safety audits and inspections + Product Quality Assurance, conduct rigorous inspections processes to ensure all products meet quality standards and comply with regulatory and internal requirements + Equipment Reliability, maintain and troubleshoot inspection equipment to ensure consistent operational readiness and minimize disruptions to the quality control process **Qualifications & Experience:** + 2+ Years in a quality assurance or quality control role within a manufacturing environment + High School Diploma or Equivalent + Food Safety certifications (e.g., HACCP) and Quality Systems certifications (e.g., ISO or ASQ) are plus + Basic computers skills Relocation assistance may be available **Compensation & Benefits** **- Hiring Salary Range:** $30.07/hr - This role will be eligible to participate in the annual incentive compensation plan. - Ball includes a comprehensive benefits structure, Go to our career site and click "Total Rewards" to learn more. **When submitting your application to Ball, we encourage you to emphasize your skills, experience, and qualifications that align with the role. Under Colorado, California, Connecticut, Minnesota, and Pennsylvania law, you have the right to exclude or redact age-related detailssuch as your date of birth, school attendance dates, or graduation datesfrom your resume, cover letter, CV, or other supporting documents (e.g., transcripts, certificates).** **Ball Corporation is proud to be an Equal Opportunity Employer. We actively encourage applications from everybody. All qualified job applicants will receive consideration without regard to race, color, religion, creed, national origin, aboriginality, genetic information, ancestry, marital status, sex, sexual orientation, gender identity or expression, physical or mental disability, pregnancy, veteran status, age, political affiliation or any other non-merit characteristic.** When you join Ball you belong to a team of over 16,000 members worldwide. Our products range from infinitely recyclable aluminum cans, cups to aerosol bottles that enable our customers to contribute to a better world. Each of us has a deep commitment to diversity and inclusion which is the foundation of our culture of belonging. Everyone at Ball is making a difference by doing what we love. Because what we create may change, but what we will always make is a difference. Please note the advertised job title might vary from the job title on the contract due to local job title structure and global HR systems. No agencies please. Job Grade:[[job Grade]]

Job Description Business Unit: Energy & Equipment Oregon (3130) Parker-Meggitt is a global engineering group specializing in extreme environment products and smart sub-systems for aerospace, defense and energy markets. We employ over 12,000 people across manufacturing facilities in Asia, Europe, North America, with regional bases in India and the Middle East.. Job Designation The Quality Inspector provides technical support to the quality team. Conducts examinations and quality control inspections on products, materials, components and parts at various stages of the production process, to ensure compliance with established quality and reliability standards. Job Core Responsibilities -Conducts examinations and quality control inspections on products, materials, and components on all types of standard and special products, to insure alignment with product requirements and quality standards - Provides detail analysis, troubleshooting and evaluation of components, assemblies and systems - Maintains documentation records and data on tests performed - Sets up or builds special test panels to facilitate testing and /or evaluation as needed - Recommends quality control solutions to complex problems and implements corrective actions The above information has been designed to indicate the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Job Specifications A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations. Vocational Training and/or apprenticeships in Quality Control Inspections or equivalent experience in related field 2-4 years of relevant experience Skills: Skilled at performing examinations and quality control inspections on products, materials, components and parts on all types of standard and special products Experience with blueprints, drawings and parts lists Proficient computer skills This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Parker-Meggitt is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. You should be proficient in: Mechanical Assembly Skills Packaging Experience Quality Control Data Analysis Meets Physical Requirements High School / GED AS9100 Experience Quality Inspection Experience Blueprint Reading Machines & technologies you'll use: Calipers and Micrometers Measurement Gauges

The Quality Assurance Technician will perform inspections on hard and soft sided shelters, trailers, incoming parts, and various other products used in the manufacturing process and received from suppliers. They are responsible for ensuring the quality of manufactured goods from production to final product by continually assessing processes and recommending improvements based on their findings. Ensuring conformity of final product based on customer requirements and specifications. This person will complete tasks such as running tests, keeping a record of defects, maintaining results, analyzing products, overseeing procedures, and performing audits. The production environment is fast paced and requires a high attention to detail. This position is assigned to Western Shelter, a member of the Western Protective Solutions family located in Eugene, Oregon and will report to the Senior Quality Manager. Responsibilities Support all WPS and ISO quality requirements. Perform and document a wide variety of complex dimensional and functional inspections and test procedures using hand tools to determine conformity of templates, received materials and parts, in-process components, and final assemblies with minimal supervision. Inspect, measure and/or test materials to specified requirements using Engineering drawings and/or work instructions. Maintain all calibrated equipment located at Western Shelter. Create, maintain, and control Western Shelter work instructions. Responsible for performing final inspection of all orders prior to shipment. Generates nonconforming material reports and participates in MRB (Material Review Board), when necessary. Perform FIAs (First Article Inspections) for required items. Assists with ISO audits. Work with hand tools such as micrometers, calipers, tape measure, and related measurement devices. Complete and ensure applicable quality documentation is supplied with orders, when necessary. Communicate with cross-functional departments to convey issues with products, specifications, and disposition of product. Record all inspection activities. Follow established company and department SOP's and maintain quality standards. Make suggestions regarding procedures, standards, and equipment to facilitate work and maintain product quality. Understand and observe all safety procedures and practices to prevent injury to self or co-workers; attend periodic safety meetings as required; recommend changes to improve safety procedures. Interact with coworkers in a positive and encouraging manner. Supports 6S/workplace organization goals of the department, offers suggestions, and makes improvements that assist in achieving the department's performance metrics. Regularly inspect, clean equipment, notify supervisor and/or facilities maintenance immediately of machines or equipment needing repair or maintenance, remove any damaged or worn tools out of service. Other duties as assigned. Qualifications Key Attributes Ability to be adaptable and flexible to changing workplace priorities. Ability to prioritize and accomplish tasks in a fast-paced environment. Work independently with minimal supervision. Ability to analyze information with minimal guidance. Ability to document and report measurement and inspection results. Ability to manage processes, manufacturing methods and procedures. Must support innovation and continual improvement. Excellent organizational skills and strict attention to detail and accuracy. Excellent verbal and written communication skills. Physical Requirements Ability to lift/move up to 50 pounds of material without assistance. Ability to stand for prolonged periods of time and perform repetitive tasks such as pulling, lifting, and carrying materials. Visual acuity to read instructions, operate machines, and inspect parts produced. Engaging in repetitive movements of wrists, hands, and fingers - typing and/or writing. Working frequently at close visual range (i.e. preparing and analyzing data and figures, transcription, computer terminal, extensive reading). Qualifications High school diploma or equivalent Working knowledge of ISO Quality Management System preferred Ability to read and interpret blueprints/engineering drawings preferred Ability to calculate cut size and read calipers, micrometers, height gauges, scales, and other measuring tools required Experience with Microsoft Office (Excel, Word, Outlook) Experience with initializing and maintaining part/BOM configuration in MRP/ERP systems strongly preferred Due to the nature of its operations, including certain federal government contracts, Western Protective Solutions must track -- and in some cases limit employment opportunity based on -- citizenship or immigration status.

Pacific Recycling, Inc. is a family-owned scrap metal recycling facility that values honesty and hard work. We have been recycling metal in Lane County for over 25 years and are proud to be an equal-opportunity employer. We are looking for a friendly, reliable, and hard-working person to join our team immediately. Job Summary: Quality Control is responsible for greeting, directing, and assisting customers. Grading materials, identifying prohibited items, and coordinating with scale and equipment operators. General Responsibilities: Inspect inbound and outbound loads Material grading - ensure products meet specifications and sort/separate accordingly Prohibited materials (sealed containers, hazardous materials, explosives, etc.) Direct and assist customers with material unloading Direct traffic effectively Communicate clearly and efficiently via radio to scale and equipment operators Use forklifts for unloading assistance Physical Demands: Frequently required to reach with hands and arms Able to talk and hear Standing, sitting, walking, squatting, bending, lifting, reaching, and grasping Dexterity of hands and fingers Lift up to 50 pounds from the floor to waist level and carry such objects for at least 30 feet Exposed to moving mechanical parts Frequently exposed to wet and/or humid conditions, heat, and outside weather conditions The noise level in the work environment varies from loud to very loud Experience & Qualifications Must be able to communicate effectively in English to understand instructions and emergency communications 18 years of age Must be able to pass a drug test Experience in scrapyard preferred but not required Self-motivated and eager to learn Reliable with the ability to adhere to a work schedule Forklift certification (Preferred) What We Offer: Competitive pay and bonus plan PTO starts at 2 weeks per year and increases with years of service 8 paid holidays Company-sponsored medical, vision, and dental insurance Annual safety boot reimbursement 401k Free gym membership Starting pay 18-19/hr DOE Full time position at 40 hours per week

Temp Food Production Quality Control Pay: Day Shift $23.60/hour (+ $2.50 night shift differential for hours worked between 5pm - 5am) Schedule: 3 - 4 day work weeks with set shifts 8pm - 8am Shift 4 - Thursday - Saturday every other Wednesday Night Shift Location: Mcminnville, OR GLISS General Labor & Industrial Staffing Solutions is hiring for Food Production Quality Control Technicians. In this role you are responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality control technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met. If you have QC/QA experience and looking for a temp-to hire position APPLY TODAY Responsibilities: Coach and train employees on GMP's. Enforce GMP's to maintain a quality product manufactured in a safe environment and meeting all targeted requirements. Maintain, and enforce company quality standards. Ensure plant operations staff delivers quality products within specification. Provide regular and timely feedback to production operations and Supervision as to critical process analytical measurements. Conduct routine testing and quality checks per schedule. Conduct allergen verification testing and gluten testing in accordance with certifying bodies and internal procedures. Assess product quality and accept or reject from processing. Ensure date codes are changed on containers to reflect proper identification of product being processed. The ability to work with individuals at all levels of the organization, including appropriate confrontation as needed when any individual or department is not compliant with quality expectations. Audit and analyze food contact equipment for cleanliness. Perform sanitation inspection of production workstations prior to startup, changeover or shift relief and communicate deficiencies to supervisor. Reject unsanitary production equipment. Calibrate or replace malfunctioning equipment. Properly and timely complete all shift documentation. Routine housekeeping of assigned workstation and adjacent areas. Manage any and all HOLDS from assigned shift and ensure product, material disposition is following Food Safety requirements. Perform required line checks. Examples are metal detection, weight checks, lot checks, etc. Inspect raw materials upon arrival, ensure proper paperwork accompanies the raw materials and pull raw material retains as required. Inspect packaging materials upon arrival, ensure proper paperwork accompanies the packaging material and pull packaging material retains as required. Communicate any non-conformance issues to the Quality Supervisor or Director of Quality. Ensure team members follow all appropriate SOPs, GMPs and safety requirements. Verify equipment is calibrated as required and documented accordingly. Provide proper paperwork to the operations and warehouse teams. Qualifications: Quality Control/Assurance experience in a manufacturing or food production facility 6 months+ Knowledge of HACCP with HACCP training Must work well in a team environment and have strong communication skills. Work independently, set priorities to meet deadlines, handle multiple tasks, and make decisions under pressure. Excellent analytical and problem-solving skills with heightened attention to detail Required: - Ability to commit to a 12-hour workday & standing/walking the entirety of the shift - Working overtime weekly & working weekend days - Speak, read & write fluent English as orientation is required and material available at this time is only in English - Ability to lift up to 50lbs - Resume & longevity of past jobs is important to this position BENEFITS OFFERED TO ELIGIBLE EMPLOYEES: Medical Insurance Dental Insurance Vision Insurance 401(k) retirement plan Referral bonuses HOW TO APPLY: 1. Online Application: Start the first part of your application online at WWW.GENERAL-LBR.COM 2. Call to Schedule: Once your application is complete, call us at ************ to schedule an interview. Applications are accepted by appointment only, Office Hours: Monday-Thursday, 8:00 AM-5:00 PM 3070 Lancaster Dr NE Salem, OR 97305

**Job Title: Quality Control Technician** **Job Description** The Incoming Quality Control Technician ensures that incoming electrical and mechanical components meet manufacturing and production standards through both dimensional and visual inspection. This role supports quality compliance, inspection reporting, and corrective action activities. **Responsibilities** + Perform inspections of incoming materials per manufacturing specifications using mechanical inspection methods, tools, and equipment. + Conduct inspections on electrical and mechanical components. + Review drawings and specifications and recommend improvements for manufacturability, cost, and safety. + Record, track, and report inspection results. + Support corrective actions related to inspection findings. + Maintain inspection tools and equipment in good working order and calibration. + Support Material Review Board (MRB) activities. **Essential Skills** + Experience in quality control and quality assurance. + Proficiency in quality inspection and visual inspection techniques. + Experience with CMM and PC DMIS. + Strong understanding of Geometrical Dimensioning and Tolerancing (GD&T) per ASME Y14.5. + Knowledge of IPC-610, ISO 9001, AS9100, or equivalent Quality Management Systems. + Strong communication skills and attention to detail. **Additional Skills & Qualifications** + Experience recommending improvements for manufacturability, cost, and safety. **Why Work Here?** Enjoy a long-term contract with the potential for hire, offering stability and growth opportunities. Work in a supportive environment committed to high-quality standards and continuous improvement. **Work Environment** Engage in a dynamic environment where you utilize various mechanical inspection methods, tools, and equipment to ensure compliance with manufacturing standards. The role requires maintaining inspection tools and equipment, as well as participating in Material Review Board activities. **Job Type & Location** This is a Contract to Hire position based out of Salem, OR. **Pay and Benefits** The pay range for this position is $30.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Salem,OR. **Application Deadline** This position is anticipated to close on Feb 2, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Northern Gold Foods (USA) is a leading manufacturer of a wide range of healthy and great tasting breakfast and snack products and we're looking for a Quality Control Technician at our facility in Junction City. We offer excellent benefits and a competitive wage. The schedule for this position is Friday - Sunday, 6:00 PM - 6:30 AM. POSITION: Quality Control Technician ESSENTIAL JOB FUNCTIONS: Monitoring, sampling, and testing food products to ensure they comply with quality standards and customer specifications. Verification of sanitation activities, including preoperational inspections, swabbing, and communicating corrective actions to production personnel. Liaising with production personnel and supervisors on day-to-day activities. Work with customers and consumers to resolve complaints; trend and report complaints to senior management with root cause analysis and continuous improvement recommendations. Investigate, trend, analyze and report complaints quarterly ESSENTIAL QUALIFICATIONS: Strong computer and organizational skills; working knowledge of MS Office. Excellent interpersonal, written, and oral communication skills. PHYSICAL DEMANDS Activities include walking, kneeling, lifting, climbing ladders and stairs, bending, stacking, twisting, pulling, pushing, inserting, sitting, squatting, standing, accumulating, and collating motions. Be able to handle 50lbs of material with assistance occasionally. WORK CONDITIONS Shifts are 12 hours, 3 days a week Must be available to work overtime hours if needed

EMPWR is Growing - Join Our Team! We make healthy, delicious snack bars and are expanding fast. With over 1,300 employees across modern facilities, we focus on teamwork, safety, and growth. Be part of our journey to shape the future of healthy snacking in our state-of-the-art production facilities. Position Overview Quality control technicians are responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality control technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met. Responsibilities Coach and train employees on GMP's. Enforce GMP's to maintain a quality product manufactured in a safe environment and meeting all targeted requirements. Maintain, and enforce company quality standards. Ensure plant operations staff delivers quality products within specification. Provide regular and timely feedback to production operations and Supervision as to critical process analytical measurements. Conduct routine testing and quality checks per schedule. Conduct allergen verification testing and gluten testing in accordance with certifying bodies and internal procedures. Assess product quality and accept or reject from processing. Ensure date codes are changed on containers to reflect proper identification of product being processed. The ability to work with individuals at all levels of the organization, including appropriate confrontation as needed when any individual or department is not compliant with quality expectations. Audit and analyze food contact equipment for cleanliness. Perform sanitation inspection of production workstations prior to startup, changeover or shift relief and communicate deficiencies to supervisor. Reject unsanitary production equipment. Calibrate or replace malfunctioning equipment. Properly and timely complete all shift documentation. Routine housekeeping of assigned workstation and adjacent areas. Manage any and all HOLDS from assigned shift and ensure product, material disposition is following Food Safety requirements. Perform required line checks. Examples are metal detection, weight checks, lot checks, etc. Inspect raw materials upon arrival, ensure proper paperwork accompanies the raw materials and pull raw material retains as required. Inspect packaging materials upon arrival, ensure proper paperwork accompanies the packaging material and pull packaging material retains as required. Communicate any non-conformance issues to the Quality Supervisor or Director of Quality. Ensure team members follow all appropriate SOPs, GMPs and safety requirements. Verify equipment is calibrated as required and documented accordingly. Provide proper paperwork to the operations and warehouse teams. Requirements Knowledge of HACCP with HACCP training preferred. Must work well in a team environment and have strong communication skills. Work independently, set priorities to meet deadlines, handle multiple tasks, and make decisions under pressure. Weekend and overtime work may be required. Excellent analytical and problem-solving skills with heightened attention to detail We offer you: · Competitive Salary: Starting at $23.60 per hour (+ $2.50 night shift differential for hours worked between 5pm - 5am) with opportunities for overtime. · Continuous Learning and Development: Benefit from our training programs designed to help you grow your skills and advance in your career. · Health and Wellness: Comprehensive health insurance (medical, dental, and vision) starting on your first day of employment. · Paid Time Off: Enjoy 2-weeks paid time off (PTO) and 7 paid holidays, so you can rest and recharge, spend time with family, or pursue personal interests. · Retirement Plans: Plan for the future with our 401(k) retirement plan options, including an automatic 3% company matching to help you save for retirement. · Work-Life Balance: We understand the importance of balance. Our fixed work schedules make it so you know your time off, allowing you to plan fun activities. · Modern, Safe Work Environment: Work in a facility that is modern, clean, with comfortable temperature and adheres to the highest standards of safety and quality. Download attachment(s) This job as a PDF file

Symrise is a global supplier of fragrances, flavors, food, nutrition and cosmetic ingredients. Its clients include manufacturers of perfumes, cosmetics, food and beverages, pharmaceuticals and producers of nutritional supplements and pet food. Its sales of € 4.6 billion in the 2022 fiscal year make Symrise a leading global provider. Headquartered in Holzminden, Germany, the Group is represented by more than 100 locations in Europe, Africa, the Middle East, Asia, the United States and Latin America. The Naturals business unit, within Food & Beverage, delivers natural ingredients, obtained using various gentle processing technologies. The team of in-house agronomists carefully selects raw materials and applies best-in-class sustainable sourcing practices, to capture the highest natural properties of conventional and organic fruit, vegetables, meat, seafood, vanilla, and botanicals. Gentle industrial processes and technological know-how enable us to deliver consumer-friendly label solutions and standardized nutritional actives. Symrise can, in this way, guarantee food safety, highest quality standards, and traceability, ensuring trust all along the value chain. Symrise - always inspiring more… The QA technician performs the following essential functions: 1. Performs raw material and finished good testing. 2. Daily sensory analysis of finished goods. 3. Initiates disposition of finished goods (release / hold) 4. Works closely with manufacturing operators to verify test results. 5. Coordianates submission of samples to third party labs. 6. Verifies calibration of laboratory equipment. 7. Maintains Product Hold Program via entry into spreadsheet, form completion, labeling and label removal. 8. Maintains sample retention program. 9. Assist with internal audits. 10. Analytical report creation. * Associates degree in science related field or four years experience in laboratory or quality setting. * Must have demonstrated abilities in written and oral communication. * Must be able to perform general office duties including data entry and filing. * The person in this position must have ability to problem solve, prioritize, follow-through on multiple tasks, meet deadlines and work in a safe, efficient manner; abiding by all safety related policies and procedures. Become part of our open and transparent culture. It will give you the opportunity to flourish and to develop inspiring experiences that contribute to the health and well-being of consumers in 160 countries around the world. Putting our employees in focus fuels our strong company growth above market rates and makes us an excellent place to develop your career. Come join us and embark on a fascinating journey with Symrise. If you feel that you fit the above criteria, then please apply by using our online application system. Your application will be treated confidentially. We are an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

The Metals Inspector reports to the Stockpiling Supervisor, the Shredder Operations Supervisor, or the Terminal Operations Manager. The Metals Inspector is responsible for observing and monitoring the delivery of material to verify conformance to quality and quantity specifications, while ensuring that all of his/her efforts are compliant with the company Health, Safety, and Environmental standards. Duties may include assisting with daily production operations, as well as receiving and stockpiling of materials and products. The Metals Inspector should possess knowledge of raw materials, production processes, and other techniques required for maximizing the receipt and transfer of quality product. This position operates under flexible parameters. The primary goal of this position is to achieve excellence in all facets of the position. Providing the highest quality product safely, effectively and efficiently decreases accidents and errors and increase profits. Essential Functions Environmental and Health & Safety (H&S) * Strictly adheres to all Metals Recycling Business Health, Safety, and Environmental standards. * Provides a safe environment for all employees, customers and visitors. Operational Performance & Best Business Practices * Inspect shipments of scrap metal received via truck, rail car, or ship to ensure material meets specifications and is free from environmental hazards in accordance with scrap acceptance policy. * Correctly identify and record inspection data such as weight, grade, content, and quantity of scrap metal. * Notify operations and commercial supervisors of problems and assist in recommending remedial procedures to correct violations or issues encountered during inspection. * Collaborate with commercial department concerning quality and consistency of customer deliveries. * Direct the unloading of vehicles delivering scrap to ensure safe and orderly traffic flow within the facility. * Provide backup or assistance throughout the yard as needed or assigned. Equipment & Maintenance * Report all equipment deficiencies or malfunctions requiring maintenance or repair to the proper supervisor. Internal Control Responsibilities Supports the Company's Internal Control process which includes understanding, communicating, and complying with defined internal controls as well as suggesting and making modifications to the policies, procedures, and controls to better relate to the business. Communicates upward problems in operations, noncompliance with the code of conduct, or other policy violations or illegal actions. Interpersonal Contacts Direct contact with Stockpiling Supervisor, Shredder Operations Supervisor, or Terminal Operations Manager, operations production employees, and customers. Face-to-face and radio communication required daily. Job Conditions This position is regularly exposed to all weather conditions. Physical hazards such as noise, fumes, and dirt are present due to the equipment, machinery, and scrap as would be found throughout the scrap yard. Safety shoes, hearing protection, respirators, face shields, and additional personal protective equipment as needed, must be worn to eliminate the risks associated with these hazards. Travel is not required for this position. Handling multiple issues regarding safety and maintenance increases pressure. Work load may be unpredictable and pressure can be substantial during peak times. Critical deadlines require considerable adaptability. Disturbances of work flow and/or irregularities in work schedule are expected and occur on an intermittent basis. Extra hours may be required, sometimes on weekends, weekdays, and holidays. Physical Activities Required to Perform Essential Functions Ability to: sit rarely; stand and walk frequently on uneven ground and throughout the yard; lift and carry up to 50 pounds consistently; push and pull occasionally when moving materials; crouch or bend at the knees consistently to move or access materials or equipment; stoop or bend at the waist consistently to move materials; reach at arms length and overhead frequently; twist and turn at the neck and trunk continually; climb occasionally when obtaining items; manual dexterity required as the Metals Inspector will handle, grasp, and manipulate materials constantly; communicate by speech and hearing continually. Visual acuity needed for close detail work and documentation. Mental dexterity needed as the Metals Inspector will work independently while demonstrating attention to detail and continuous awareness. Qualifications * High School diploma, GED Certification, or equivalent experience in a similar role preferred. * Ability to develop and maintain constructive and cooperative working relationships with customers and other employees required. This position offers competitive pay along with a variety of benefits including medical, dental and vision plans for both you and your dependents; 401k with company match, paid time off which starts with your first check, and paid holidays. PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. All U.S. applicants must be 18 years of age or older and all Canada applicants must be 16 years of age or older. Radius Recycling participates in e-verify for all U.S. new hires. An offer of U.S. employment by Radius Recycling or any of its subsidiaries is contingent on the satisfactory completion of a post-offer drug screen and background check. All new hires must review and sign an Arbitration Agreement. This applies to all U.S. non-union employees. As an Equal Opportunity Employer, Radius Recycling does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.

Job Description Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR ZwWwPAYVQy

Requirements JOB RESPONSIBILITIES: To include but not limited to the following: Receiving, In-process and Final inspections Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T Basic experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. Visual Product Inspections - Surface Cosmetics of Plated/Painted and bare material parts Experience with operating manual and/or automated CMM a plus Generate Clear and concise Non-conformance Reports Able to work overtime Preference will be given to candidates with prior machinist experience PERSONAL QUALIFICATIONS: Self-Starter / Self-Motivated / Flexible / Detail Oriented Reliable and dependable Positive customer focused attitude Enjoys fast pace and rapidly changing environment Honest with stellar integrity Professional demeanor and respectful to people in all situations Flexible and willing to help others as needs and tasks change often Team player COMPENSATION / BENEFITS: • $18 to $21 per hour DOE • PTO and paid holidays • Medical/Dental/Vision Coverage • Short- and long-term disability coverage • 401K with matching funds Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $18 to $21 per hour DOE

Business Unit: Energy & Equipment Oregon (3130) Parker-Meggitt is a global engineering group specializing in extreme environment products and smart sub-systems for aerospace, defense and energy markets. We employ over 12,000 people across manufacturing facilities in Asia, Europe, North America, with regional bases in India and the Middle East.. Job Designation The Quality Inspector provides technical support to the quality team. Conducts examinations and quality control inspections on products, materials, components and parts at various stages of the production process, to ensure compliance with established quality and reliability standards. Job Core Responsibilities -Conducts examinations and quality control inspections on products, materials, and components on all types of standard and special products, to insure alignment with product requirements and quality standards - Provides detail analysis, troubleshooting and evaluation of components, assemblies and systems - Maintains documentation records and data on tests performed - Sets up or builds special test panels to facilitate testing and /or evaluation as needed - Recommends quality control solutions to complex problems and implements corrective actions The above information has been designed to indicate the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Job Specifications A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations. Vocational Training and/or apprenticeships in Quality Control Inspections or equivalent experience in related field 2-4 years of relevant experience Skills: Skilled at performing examinations and quality control inspections on products, materials, components and parts on all types of standard and special products Experience with blueprints, drawings and parts lists Proficient computer skills This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Parker-Meggitt is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. You should be proficient in: Mechanical Assembly Skills Packaging Experience Quality Control Data Analysis Meets Physical Requirements High School / GED AS9100 Experience Quality Inspection Experience Blueprint Reading Machines & technologies you'll use: Calipers and Micrometers Measurement Gauges

This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants. Further your career at Ball, a world leader in manufacturing sustainable aluminum packaging. Achieve extraordinary things when you join our team, and make a difference in your professional development, the community, and around the globe! Ball is thrilled to receive Newsweek's 2023 Top 100 Global Most Loved Workplace award! As a sustainable product leader, we have over 16,000 global team members. From endlessly recyclable aluminum cans, and cups, to aerosol bottles, our goal is to contribute to a better community, society, and world. Exciting News from Ball Corporation! We're thrilled to announce that a brand-new location is coming to Millersburg, OR - and with it, some incredible career opportunities! As we begin building our presence in the area, we're also kicking off recruitment efforts to bring top talent on board. If you're looking for a fresh opportunity with a company committed to innovation and excellence, now's the time to apply! Position Overview: As a Quality Assurance Technician, you play a critical role in ensuring that aluminum can products meet established quality and food safety standards. Your responsibilities include advising production teams on quality compliance, conducting inspections, and analyzing data to identify trends and drive continuous improvement. By minimizing quality-related downtime and ensuring compliance with industry regulations, you enhance overall production efficiency and product integrity. Competencies: * Quality Control and Inspections: expertise in conducting through product inspections to ensure compliance with quality standards and specifications * Effective Communication: ability to effectively communicate with cross-functional stakeholders, providing constructive feedback to team members and facilitation collaboration * Equipment Troubleshooting and Maintenance: proficiency in performing basic troubleshooting and maintenance of inspection equipment to maintain operation efficiency * Process Optimization and Standardization: skilled in implementing Statistical Process Control (SPC) techniques to improve production efficiency and standardization * Data Analysis & Continuous Improvement: strong analytical skills to interpret date, identity trends, and drive process enhancements for better production outcomes * Regulatory Compliance: in-depth understanding of quality standards and systems (e.g., ISO), ensuring adherence to regulatory and internal compliance requirements Skills: * Basic troubleshooting, ability to identify and resolve common mechanical and graphics issues in the production process to minimize downtime * Mechanical aptitude, understanding of mechanical systems and tools, enabling efficient handling and maintenance of machinery * Flexibility in Production roles, flexibility to switch between different tasks and roles, ensuring smooth workflow and responsiveness to production needs * Routine Equipment Operation, competence in operating standard manufacturing equipment, adhering to safety protocols, and maintaining consistent production quality * Quality Standards and Systems Knowledge, familiarity with quality management system (e.g., ISO), supporting compliance and continuous improvement initiatives * Problem-Solving Skills, experience with root cause analysis tools and ability to recommend corrective and preventive actions to address quality issues Accountabilities: * Statistical Process Control (SPC) Data Analytics, analyze SPC system data to identify trends, perform root causes analysis, escalate decisions, and provide insights for continuous improvement * Inspection Equipment Maintenance, perform basic troubleshooting and maintenance of inspection equipment to ensure operational efficiency and reliability * Quality Decision-Making, make informed decisions on releasing or holding products for inspection during shifts, maintaining product quality standards * Collaboration with Production Teams, work closely with production teams to implement control plans and address quality issues effectively * Food Safety Compliance, ensure adherence to food safety standards and certifications, leading and coordination food safety audits and inspections * Product Quality Assurance, conduct rigorous inspections processes to ensure all products meet quality standards and comply with regulatory and internal requirements * Equipment Reliability, maintain and troubleshoot inspection equipment to ensure consistent operational readiness and minimize disruptions to the quality control process Qualifications & Experience: * 2+ Years in a quality assurance or quality control role within a manufacturing environment * High School Diploma or Equivalent * Food Safety certifications (e.g., HACCP) and Quality Systems certifications (e.g., ISO or ASQ) are plus * Basic computers skills Relocation assistance may be available Compensation & Benefits * Hiring Salary Range: $30.07/hr * This role will be eligible to participate in the annual incentive compensation plan. * Ball includes a comprehensive benefits structure, Go to our career site and click "Total Rewards" to learn more. When submitting your application to Ball, we encourage you to emphasize your skills, experience, and qualifications that align with the role. Under Colorado, California, Connecticut, Minnesota, and Pennsylvania law, you have the right to exclude or redact age-related details-such as your date of birth, school attendance dates, or graduation dates-from your resume, cover letter, CV, or other supporting documents (e.g., transcripts, certificates). Ball Corporation is proud to be an Equal Opportunity Employer. We actively encourage applications from everybody. All qualified job applicants will receive consideration without regard to race, color, religion, creed, national origin, aboriginality, genetic information, ancestry, marital status, sex, sexual orientation, gender identity or expression, physical or mental disability, pregnancy, veteran status, age, political affiliation or any other non-merit characteristic. When you join Ball you belong to a team of over 16,000 members worldwide. Our products range from infinitely recyclable aluminum cans, cups to aerosol bottles that enable our customers to contribute to a better world. Each of us has a deep commitment to diversity and inclusion which is the foundation of our culture of belonging. Everyone at Ball is making a difference by doing what we love. Because what we create may change, but what we will always make is a difference. Please note the advertised job title might vary from the job title on the contract due to local job title structure and global HR systems. No agencies please. Job Grade: [[job Grade]] Nearest Major Market: Salem

Job Description Northern Gold Foods (USA) is a leading manufacturer of a wide range of healthy and great tasting breakfast and snack products and we're looking for a Quality Control Technician at our facility in Junction City. We offer excellent benefits and a competitive wage. The schedule for this position is Friday - Sunday, 6:00 PM - 6:30 AM. POSITION: Quality Control Technician ESSENTIAL JOB FUNCTIONS: Monitoring, sampling, and testing food products to ensure they comply with quality standards and customer specifications. Verification of sanitation activities, including preoperational inspections, swabbing, and communicating corrective actions to production personnel. Liaising with production personnel and supervisors on day-to-day activities. Work with customers and consumers to resolve complaints; trend and report complaints to senior management with root cause analysis and continuous improvement recommendations. Investigate, trend, analyze and report complaints quarterly ESSENTIAL QUALIFICATIONS: Strong computer and organizational skills; working knowledge of MS Office. Excellent interpersonal, written, and oral communication skills. PHYSICAL DEMANDS Activities include walking, kneeling, lifting, climbing ladders and stairs, bending, stacking, twisting, pulling, pushing, inserting, sitting, squatting, standing, accumulating, and collating motions. Be able to handle 50lbs of material with assistance occasionally. WORK CONDITIONS Shifts are 12 hours, 3 days a week Must be available to work overtime hours if needed

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only