Quality inspector jobs in Costa Mesa, CA - 544 jobs

RESPONSIBILITIES: Responsibilities may include some or all of the following: Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION Perform semi-complex inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish. Adapt and develop inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture. Determine acceptance or rejection after inspecting parts, tools, instruments or x-ray film. Identify causes of defective conditions and test failures and prepare all appropriate documentation. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary. CALIBRATION Perform calibration on various types of semi-complex measuring and test equipment. Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions or related documents. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired equipment. NONDESTRUCTIVE TEST Perform daily, weekly and monthly equipment and material checks. Perform pre-inspection and post-inspection cleaning. Set-up equipment and conduct tests of a semi-complex scope. Perform complete inspections in accordance with the applicable specifications, standards and other contractual documents. Interpret, evaluate and document inspection results in accordance with approved procedures. Observe all prescribed safety rules and regulations and maintain a FOD free work area. Perform other related responsibilities. Job Requirements: ⦁ Three years related inspection, calibration, or NDT experience or demonstrated ability to perform described responsibilities. ⦁ May be required to be certified as a Level II Nondestructive Test Inspector in two or more disciplines. ⦁ Certification must be in accordance with MIL-STD-410 and PES1-29. ⦁ Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. ⦁ Knowledge of applicable military standards or specifications required. ⦁ Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Possess working knowledge of shop mathematics including trigonometry.

Quality Manger LIGHT Helmets (Safer Sports, Inc.) Carlsbad, CA (with occasional travel to supplier) LIGHT Helmets is a cutting-edge football helmet manufacturer located in Carlsbad. We are hiring immediately for a Production Manager for our assembly operations. We are a high growth company that offers career advancement opportunities. LIGHT is looking for a HIGHLY MOTIVATED, FOCUSED individual to be part of our fun sports-oriented team. The ideal candidate must have excellent multi-tasking skills and perform a wide variety of duties including: · Required Experience Minimum 2 years of experience managing Quality Assurance/Quality Control (QA/QC) ISO 9001 certification preferred Key Responsibilities o Quality Oversight Manage all quality-related aspects of our products Oversee lot acceptance and inventory management Develop inspection standard operating procedures (SOPs) and acceptance criteria Monitor and ensure paint quality standards o Vendor and Product Compliance Manage vendor quality control procedures Ensure product compliance with internal and external standards o Quality System Management Oversee internal quality systems Maintain and update the quality management system to ensure compliance with the SEI Program Manual Lead SEI audit preparations and communications with the auditor o Product Testing Coordinate NOCSAE testing (initial and annual) Schedule testing and collaborate with production to build helmets for quality testing Manage in-house lab testing of products Perform routine maintenance and calibration of lab equipment Train lab technicians on helmet and component testing procedures Archive and manage testing data o Training and Documentation Train staff on quality inspection protocols Ensure ongoing compliance through regular training Handle documentation and reporting related to quality processes Compensation Base Salary $78,500-98,500 Employee Stock Ownership plan after 12 months of contiguous employment Target Bonus 5-10% of base tied to predetermined KPIs related to defect, costs, etc.

Job Posting Start Date 01-20-2026 Job Posting End Date 04-03-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Quality Assurance Manager, is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Strong analytical, problem-solving, detail-oriented skills Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: The CMM Quality Inspector by using the Gill Process Documents (i.e.: GPS, GMS, GOS), performs essential duties to meet customer and AS9100 requirements and supports engineers with complex tasks. This position also works on quality-related projects with direction from the Quality Control Manager. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follow company policies and procedures Comprehend and ensure compliance with internal quality documents, and customer specifications Read and understand customer specifications, process standards, drawings (blue prints), ANSI procedures, and industry standards. Coordinate with CNC production to inspect and rework parts in a timely matter. Must be able to setup, program, and operate Coordinate Measuring Machines, both traditional in-place and articulated-arm (Romer) devices. Proficient in reading blueprints, understanding GD&T, and working with associated technical documents. Proficient in the selection of appropriate hand-held and/or surface plate measuring equipment appropriate to the task. Comfortable providing instruction for the development of Inspection employees within the organization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education (Required) Functionally capable in the use of Microsoft Office and other basic computer software. Ability to comfortably multitask with minimal supervision. Ability to effectively communicate verbally and in writing Acceptable Vision Test results Hexagon Metrology coordinate measuring machine level 1 Working knowledge of PC-DMIS software ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Take Your Construction Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Construction Services team is looking for you! From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Step into Your New Role Kleinfelder Construction Services is seeking an experienced Lead Roadway Inspector to perform quality assurance inspection services on transportation-related road and highway improvement projects in the Inland Empire. The Lead Roadway Inspector will be assigned a field vehicle and gas card, reporting to a construction job site(s), with the ability to work extended shifts and nights as needed. The initial assignment is for a bus rapid transit project in Ontario. Job Duties * Lead a team of field inspectors coordinating inspection between multiple jurisdictions and municipalities * Perform quality assurance inspection and documentation of civil (roadway) construction activities under the direction of a Resident Engineer * Coordinate construction activities with various property/business owners within the proximity to the project; provides verification of adherence to temporary construction easements * Issue field directives to the Contractor; attend weekly construction meetings; coordination of the construction schedule and notifications with the public outreach team * Coordinate Quality Assurance materials sampling and testing * Verify the implementation of the Contractor's Quality Control Program and adherence to plans and specifications * Prepare detailed Daily Inspection Reports, with photos, accurately reflecting the construction progress * Measure, calculate, track, and record pay quantities for monthly estimates * Assist in maintaining, supporting, and promoting a safe work environment while complying with applicable safety rules, policies, and procedures * Maintain a set of field as-built drawings * Assist the Resident Engineer with field input on change orders, RFIs, submittals and response letters to the contractor, and as-built drawings Qualifications/Skills * High school diploma or equivalent. Associate degree preferred. * Minimum of ten (10) years of demonstrated experience in roadway construction inspection of highways or major public works projects including traffic control, PCC and AC paving, earthwork, grading, drainage, and signing and striping * Knowledge and experience with equipment used in construction inspection, surveying and field testing of construction materials. * Knowledge and experience with principles of effective communication and supervision * Able to work independently, make effective decisions concerning construction work in progress and solve field problems * Able to direct the efforts of subordinate inspectors Additional Preferred Qualifications 1) BS degree in Civil Engineering and/or EIT 2) Caltrans inspection experience 3) Proficient in the use of Microsoft Office programs 4) Knowledge of Caltrans standard plans, specifications, procedures, and Construction Manual 5) Ability to assist the Resident Engineer in all aspects of required field and office construction engineering work including, but not limited to the following: * Experience in the inspection of traffic control system compliance * Experience in Water Pollution Control Program (Storm Water Pollution Prevention Plan) enforcement * Knowledge and experience with equipment used in construction inspection, surveying, field testing of construction materials, and construction office engineering * Knowledge of computers, computer applications, and computer software programs such as Microsoft Office (Word, Excel, PowerPoint, and others) * Knowledge and experience with principles of effective communication and supervision * Ability to work night shifts for an extended duration Move Forward with Kleinfelder Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 110 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver. Progress with an Employer that Values You Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. The expected salary range for the position is displayed in accordance with the California Pay Transparency Law. Final agreed upon compensation is based upon individual qualifications and experience. Salary range: $34.73 - 57.96/hr. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder. #LI-SF1

Career-defining. Life-changing. At iRhythm, you'll have the opportunity to grow your skills and your career while impacting the lives of people around the world. iRhythm is shaping a future where everyone, everywhere can access the best possible cardiac health solutions. Every day, we collaborate, create, and constantly reimagine what's possible. We think big and move fast, driven by our commitment to put patients first and improve lives. We need builders like you. Curious and innovative problem solvers looking for the chance to meaningfully shape the future of cardiac health, our company, and your career About This Role: The 2nd Shift Quality Control (QC) Inspector is responsible for supporting manufacturing operations during second shift by performing inspection, documentation review, and batch release readiness activities for finished goods and sub-assemblies. This role focuses on reviewing batch records, travelers, and routers, ensuring Good Documentation Practices (GDP) compliance, identifying quality issues, and initiating nonconformances (NCs) when required. The QC Inspector also provides Receiving Inspection (RI) support as needed to ensure material flow continuity and compliance with inspection requirements. Why This Role Is Critical Provides real-time quality oversight on second shift, ensuring batch records, travelers, and GDP compliance are verified at the time of execution rather than retrospectively. Enables timely identification and containment of nonconformances, reducing quality escapes, rework, and compliance risk. Supports on-time release readiness and uninterrupted manufacturing flow, preventing inspection and documentation backlogs into first shift. Strengthens audit readiness and cross-shift continuity, ensuring clear handoff and sustained control of quality issues across shifts. What You WIll Be Doing Batch Record, Traveler & Router Review Perform detailed review of batch records and travelers for finished goods and sub-assemblies to ensure completeness, accuracy, and compliance with approved procedures. Verify that all required manufacturing steps, inspections, testing reports, in-process checks, and approvals are properly completed and documented. Ensure material traceability, including material lots, subassemblies, equipment identification (when applicable), and inspection status. Access and reference the electronic Quality Management System (eQMS) to ensure the current, approved revisions of drawings, specifications, procedures, and work instructions are used during inspection and batch record review activities. Verify that batch records, travelers, and inspection activities are executed against the correct released document revisions, and escalate discrepancies when outdated or incorrect documents are identified Identify documentation errors, omissions, or discrepancies and ensure timely correction in accordance with GDP requirements. Finished Goods & Sub-Assembly Inspection Perform in-process, final, or verification inspections of finished goods and sub-assemblies per approved inspection plans and work instructions. Ensure inspection results are accurately recorded and aligned with acceptance criteria. Support timely review and release readiness of manufacturing lots to maintain production flow. Nonconformance Identification & Escalation Identify, document, and initiate Nonconformance (NC) records when inspection results, documentation, or material conditions do not meet requirements. Ensure nonconforming material is properly identified, labeled, and segregated to prevent unintended use. Escalate quality issues to Quality Control leadership and Manufacturing supervision as required. Good Documentation Practices (GDP) Compliance Enforce GDP standards across all reviewed records, including batch records, travelers, routers, and inspection forms. Ensure corrections, clarifications, and late entries (when applicable) are performed per approved GDP procedures. Support identification of recurring documentation issues and participate in corrective actions or retraining as needed. Receiving Inspection (RI) Support Perform Receiving Inspection (RI) activities when required, following approved sampling plans, inspection criteria, and procedures. Verify material identification, lot traceability, and acceptance status. Accurately document RI results and communicate material status to Manufacturing and Quality teams. Compliance & Audit Readiness Perform all activities in compliance with ISO 13485, and internal QMS SOPs, DOP's and work instructions. Maintain inspection areas and records in a state of audit readiness. Support internal audits and regulatory inspections by providing accurate records and inspection evidence as requested. Cross-Shift & Cross-Functional Communication Communicate inspection results, documentation issues, and open quality concerns clearly during shift handoffs. Collaborate with Manufacturing, Quality Engineering, Receiving, and first-shift QC personnel to ensure continuity of quality controls. What We Want to See High School Diploma or GED required; Associate's or Bachelor's Degree in a technical or life sciences field is preferred. Minimum of 2-5 years of experience in a medical device manufacturing, pharma, aerospace or regulated manufacturing environment, preferably in Quality Control or Inspection. Experience navigating an electronic Quality Management System (eQMS) to review and reference released drawings, specifications, SOPs, and work instructions Working knowledge of Good Documentation Practices (GDP) and controlled document execution. Experience reviewing batch records, travelers, routers, and inspection records. Ability to identify quality issues and initiate nonconformance records in accordance with established procedures. Strong attention to detail with a focus on accuracy, compliance, and data integrity. Ability to work independently on second shift with minimal supervision. Effective verbal and written communication skills. Ability to manage multiple tasks and prioritize work to support production needs. Ways to Stand Out Experience performing Receiving Inspection (RI) or FAI activities. Familiarity with sampling plans, inspection plans, and acceptance criteria. Demonstrated experience reviewing engineering drawings, including GD&T, to identify critical-to-quality (CTQ) characteristics, specification notes, and applicable inspection requirements, and applying them during inspection and batch record review Experience using enterprise resource planning (ERP) systems (e.g., QAD, SAP) to support manufacturing execution, batch review, material status, and traceability is a plus Location: Orange County Actual compensation may vary depending on job-related factors including knowledge, skills, experience, and work location. Estimated Pay Range $21.15 - $26.44 As a part of our core values, we ensure an inclusive workforce. We welcome and celebrate people of all backgrounds, experiences, skills, and perspectives. iRhythm Technologies, Inc. is an Equal Opportunity Employer. We will consider for employment all qualified applicants with arrest and conviction records in accordance with all applicable laws. iRhythm provides reasonable accommodations for qualified individuals with disabilities in job application procedures, including those who may have any difficulty using our online system. If you need such an accommodation, you may contact us at ********************* About iRhythm Technologies iRhythm is a leading digital healthcare company that creates trusted solutions that detect, predict, and prevent disease. Combining wearable biosensors and cloud-based data analytics with powerful proprietary algorithms, iRhythm distills data from millions of heartbeats into clinically actionable information. Through a relentless focus on patient care, iRhythm's vision is to deliver better data, better insights, and better health for all. Make iRhythm your path forward. Zio, the heart monitor that changed the game. There have been instances where individuals not associated with iRhythm have impersonated iRhythm employees pretending to be involved in the iRhythm recruiting process, or created postings for positions that do not exist. Please note that all open positions will always be shown here on the iRhythm Careers page, and all communications regarding the application, interview and hiring process will come from a @irhythmtech.com email address. Please check any communications to be sure they come directly from @irhythmtech.com email address. If you believe you have been the victim of an imposter or want to confirm that the person you are communicating with is legitimate, please contact *********************. Written offers of employment will be extended in a formal offer letter from an @irhythmtech.com email address ONLY. For more information, see *********************************************************************************** and *****************************************

Elevate Your Career as a Quality Control Receiving Inspector in Huntington Beach, CA! - Urgently hiring 1st Shift QC Receiving Inspector in Huntington Beach! Job Title: Quality Control Receiving Inspector Pay: $26 - $27 per hour Hours: 6:30 AM - 3:00 PM Start Date: ASAP Looking for a hands-on role in a growing company? Join Helpmates, a leader in quality assurance within the aviation industry, as a Quality Control Receiving Inspector in Huntington Beach, CA and make an impact every day. As a Quality Control Receiving Inspector, you'll play a key role in ensuring the highest standards of quality for aviation parts, directly contributing to the safety and reliability of the industry. You'll work closely with engineering teams to deliver results that make a difference. What You'll Do: As a Quality Control Receiving Inspector, you will be responsible for: Interpreting engineering drawings and specifications to ensure accurate inspections. Utilizing precision measuring tools like calipers, micrometers, height gauges, and indicators for thorough assessments. Conducting visual and dimensional inspections for incoming aviation parts. Performing receiving and first article inspections to guarantee compliance with industry standards. Preparing detailed inspection reports and nonconformance documentation. Identifying root causes of any discrepancies and contributing to corrective actions. Reviewing supplier certifications for compliance with specified requirements. Collecting and analyzing data for statistical assessments related to quality metrics. Understanding and interpreting tolerances, as well as geometric and positional requirements. Traveling as needed to support supplier audits or inspection programs. What You'll Bring: The ideal candidate for this role will have: Education: High School Diploma or GED equivalent is required; an Associate's Degree is desired. Experience: Open to both entry-level candidates and those with prior experience in quality control. Skills: Experience with raw materials, electrical, machined components, crush core panels, and/or injection molded parts is preferred. Why Join Us in Huntington Beach? Supportive Team Culture: Work alongside a talented team dedicated to quality and excellence. Career Growth Opportunities: Expand your skills and advance in a thriving company. Competitive Pay and Great Benefits: Enjoy industry-leading compensation and comprehensive health benefits. Affordable Health and Prescription Coverage: Receive health benefits with no waiting period once hired permanently. Retirement Plan: Access to a 401k or Pension plan. Location & Schedule: This position is on-site in Huntington Beach, CA and offers 1st shift hours from 6:30 AM to 3:00 PM. Ready to Take the Next Step? If you're ready to start a rewarding career as a Quality Control Receiving Inspector in Huntington Beach, apply today or contact our recruiting team to learn more. Don't wait, we're hiring now!

Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule This is a 3 - 4 x 11 rotating shift working alternating Wednesdays. Shifts Available * Sun - Wed 1st shift (5am - 4:30pm) * Sun - Wed 2nd shift (4pm - 3:30am) * Wed - Sat 1st shift (5am - 4:30pm) * Wed - Sat 2nd shift (4pm - 3:30am) Purpose This Lead role is accountable for driving inspection excellence across the organization. In addition to performing complex metrology work, this position provides day-to-day leadership, mentorship, and coordination for the inspection team. The Lead ensures high standards are upheld, inspection priorities are managed effectively, and knowledge is developed across the team. Through technical expertise and a hands-on presence, you will guide peers, foster collaboration, and deliver accurate inspection results that ensure compliance with engineering specifications. The Role * Perform advanced inspection and metrology work using scanners (FARO, Romer, Creaform, GOM, etc.) and 3D software (PolyWorks, Zeiss). * Deliver accurate inspection files, data, and reports to ensure compliance with engineering requirements. * Lead by example through direct hands-on inspection work (at least 50% of shift). * Receive and provide clear shift handoffs with both written and verbal updates to maintain continuity. * Prioritize and delegate daily tasks, balancing team capacity and operational needs. * Conduct spot checks, provide feedback, and uphold high-quality standards across the team. * Mentor and train peers, including onboarding of new inspectors and cross-training initiatives. * Maintain situational awareness of work progress, equipment status, and team needs throughout the shift * Foster a positive, collaborative team culture, demonstrating emotional intelligence and conflict resolution skills. * Ensure the Metrology Lab remains clean, organized, and safe in alignment with 5S practices. Basic Qualifications * Ability to lawfully access information and technology that is subject to US export controls * Minimum 2-3 years of experience in a Quality Inspection or Metrology role in aerospace, automotive, or other high-precision production environment. * High-school diploma (required). * Proficiency in computer systems (Windows, Teams, Excel, etc.). * Strong ability to interpret engineering drawings, GD&T, and specifications. * Physical ability to lift up to 50 lbs and operate scanning equipment for extended periods. * Excellent written and verbal communication skills. * Strong problem-solving and analytical mindset. * Team-first approach with proven ability to lead by example. Preferred Qualifications * Associate degree or higher in a technical field, or equivalent work experience. * Prior experience in a lead, mentoring, or training capacity. * Background in cross-functional collaboration with Quality, Engineering, and Production teams. * Experience in regulated or high-performance manufacturing environments. Work Environment * This role is based in a dynamic manufacturing setting and may require standing and handling precision equipment for extended periods of time. * Must be able to lift at least 25 lbs. * Company Uniform must be worn while working. * PPE must be worn while working. Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels ABC - XYZ as evaluated through our interview process. * Lead Technician / T04: $29.00 - $40.00 * Senior Technician / T05: $32.00 - $44.00 Pay Range $29-$44 USD What We Offer: * Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. * Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. * Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. * Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. * Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

The Quality Inspector is responsible for performing incoming and in‑process inspections to ensure all purchased and manufactured components meet required specifications. This includes using precision measurement tools, interpreting technical drawings, maintaining accurate inspection records, and supporting both QA and manufacturing teams in a regulated environment. The role also requires proper handling, identification, and documentation of materials. This position is onsite in Irvine or Tustin, CA, 5 days per week (possible Saturday work) with 1-3 hours of required overtime per day. Day‑to‑Day Responsibilities Perform incoming and in‑process inspections on manufactured and purchased components per drawings and control plans. Use properly calibrated gages and precision measurement tools (micrometers, verniers, dial calipers, hardness testers, surface testers, preset gauges). Prepare and maintain component history records and incoming part documentation. Ensure all materials are properly identified, documented, and segregated. Process and segregate non‑conforming materials per procedure. Support QA with technical assistance on measurement systems. Provide assistance to manufacturing teams as needed. Work with and understand ESD (electrostatic discharge) devices. Maintain a safe and compliant work environment. Perform other duties as assigned. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements High school diploma. Minimum 2 years of QA/QC experience with on‑the‑job training. Extensive hands-on experience using precision measuring tools for high‑tolerance components. Strong proficiency in blueprint reading and interpreting tight tolerances. Familiarity with GD&T (Geometric Dimensioning & Tolerancing). Ability to perform basic math (whole numbers, fractions, decimals). Familiarity with machine shop environments and processes. Ability to ensure product quality in a highly regulated environment and maintain Device Master History record integrity. PC skills including Word, Excel, Access, and exposure to ERP/manufacturing data systems. Technical training or relevant certifications. Experience operating a CMM; ability to program CMM equipment (training may be provided). Broader understanding of manufacturing data systems or advanced inspection tools.

Responsibilities: Perform visual and dimensional checks various incoming products (sheet metal, PCBAs or CCAs, Printed Boards or PCBs, Conformal Coating, Labels or markings, Cables, Harnesses; COTS items, and etc.) at various stages (Incoming, RMA, In-process, Final, Shipping, etc.) Test and or verify products for a variety of characteristics such as functional performance mechanically or electrically, or chemical properties or composition. Perform First Article Inspection and prepare FAIRs as needed. Record Inspection findings and generate NCMR's, DCRs' and ERRs' as needed. Communicate with the Project Mangers or QA for any possible delays and/or resolutions of any urgent and high priority jobs. Required: Extensive working knowledge of IPC-A-600, J-STD-001 and IPC-A-610, and IPC-A-620. Prior or current IPC training and/or certification is preferred. Ability to read, comprehend and interpret engineering drawings and documentation such as electrical schematic diagrams, mechanical and assembly drawings, BOM, and assembly instructions, and etc. Ability to adjust in fast-paced dynamic operations. Ability to apply concepts of basic algebra and geometry such as decimals, fractions, length, proportions, percentages, area, circumference, and volume. Ability to confer with management or engineering staff to determine quality and reliability standards or applicable requirements. Ability to use mechanical measurement tools such as calipers, micrometers, and electrical measurement tools, etc. Ability to operate computers and able to use computer applications and files such Microsoft Word and Excel, Adobe PDF, Outlook emails, and other databased platforms. Detail oriented, dedicated and self-motivated. Ability to work under minimum supervision. Work well in a team environment. Must have good interpersonal skills.

The Quality Control Inspector is responsible for verifying that Solar PV, BESS, and EV projects are installed in compliance with design drawings, codes, standards, and client requirements. This role ensures quality assurance through inspection, documentation, and enforcement of corrective actions.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

Industry: Precision Manufacturing / Machining Shift: 2nd Shift (3:00 PM to 1:30 AM, 4/10 schedule) Pay: $24-$28/hour (DOE) Schedule Notes: Candidate will train on 1st shift (6:00 AM - 4:30 PM) during the first week. Upon successful training, they will move to 2nd shift (3:00 PM - 1:30 AM). Position Overview: Seeking an experienced Quality Control Inspector to perform dimensional inspections and first article inspections within a precision machining environment. Qualifications: • Proficient with micrometers, calipers, gauges, optical comparators, height gauges, drop indicators, etc. • Experience with standard QC measuring equipment • Able to perform First Article inspections with minimal supervision • Strong math and measurement skills • Familiarity with blueprint reading & work instructions • Comfortable in a fast-paced manufacturing environment • Proficient using Windows-based software • Strong communication skills; detail-oriented and organized Responsibilities: • Perform dimensional inspections (in-process, first article, final) • Read and interpret blueprints and specifications • Monitor production operations for conformance to specifications • Reject or tag non-conforming parts/materials • Communicate inspection findings and recommended adjustments • Perform additional related tasks as needed KPG123

Full-time Description Shift: 2:30pm - 11:00pm Scope: Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: Perform Final Inspection on finished product to ensure compliance to customer requirements. Read customer drawings Perform measurements with measurement tools such as calipers, micrometers, and pin gages. Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding Verify acceptability of rework after completion Identify and mark non-conforming product to ensure it is not delivered Prepare standard and AS9102 First Article Reports as needed Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product Complete Deliverables for Customers and ensure they are complete and accurate Complete department logs and record yield data as required Perform preventative maintenance as defined by department maintenance schedule Support other work areas or departments as required by production or management. Ability to work overtime as requested Keep work area clean and organized Requirements Essential Qualifications, Education and Experience: High school diploma or equivalent One year of PCB manufacturing experience Knowledge of IPC-6012, or IPC-6013 Knowledge of IPC-600 Strong work ethic Ability to work effectively in a team environment Physical Requirements: Prolonged periods sitting and performing visual and manual tasks. Fine motor skills Ability to use microscopes for long periods of time performing job duties ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be considered for this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Compensation: Exact compensation may vary based on skills, experience, and location. About AdvancedPCB AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features 6 total manufacturing sites: Santa Clara, our headquarters in the heart of the Silicon Valley; 2 in Southern California, 1 in Maple Grove, Minnesota, Aurora, Colorado and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making AdvancedPCB one of the largest privately held printed circuit board manufacturers in North America. Visit us! ********************************** Salary Description $18.00- $24.00

From Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Role OverviewThis is a full-time, on-site role for a Quality Control Inspector located in Ontario, CA. The Quality Control Inspector will be responsible for conducting inspections, ensuring quality control and quality assurance, and managing quality-related processes. The inspector will perform regular quality checks, document findings, analyze quality data, and maintain records. The role also involves collaborating with other team members to identify and address any quality issues and implementing corrective actions to ensure products meet the company's standards.Key Responsibilities Conduct in-process and final inspections of products to ensure conformance to standards. Perform regular quality checks, document findings, and analyze quality data. Maintain accurate and detailed records of inspections and test results. Collaborate with production teams to identify and address quality issues. Assist in implementing corrective actions to ensure products meet company standards. Ensure all processes and products adhere to industry standards and regulations. Required Qualifications Proven experience in Quality Control, Quality Assurance, and Inspection. Experience with Quality Management systems and processes. Strong communication skills. Excellent attention to detail and problem-solving abilities. Ability to work independently and as part of a team. Knowledge of industry standards and regulations. Associate degree or equivalent relevant experience. Preferred Qualifications Bachelor's Degree is preferred. Additional certifications in quality control or related fields are a plus. Previous experience in a manufacturing or fabrication environment is beneficial. Additional Requirements: Willingness to work long hours and weekends when needed to meet critical deadlines Willingness to travel to customers' locations or other Hera sites as needed Ability to use a computer and most common software programs to complete assignments Ability to communicate with individuals and groups in person, by phone and online Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The base salary is just one part of your total compensation package at Hera. You will also have access to a comprehensive set of benefits like: Company paid employee medical, dental and vision insurance Retirement plan participation (eligibility required) Paid Sick LeavePaid VacationPaid holidays Discretionary bonuses Physical Requirements / Work Environments· Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations· Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly· Visual acuity required for reading technical drawings and digital media· Valid US driver's license and ability to operate motor vehicles The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. EXPORT CONTROL REQUIREMENTS:To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Hera Technologies is an Equal Opportunity Employer, employment with Hera Technologies is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: Perform inspection of materials, processes and final product, per business need. Generates inspection reports according to AS9100 requirements. Enter inspection data into systems. Utilizes inspection tools including calipers, gauges and testing equipment (CMM). Reads and interprets drawings, procedures and work instructions. Identifies areas for improvement in inspection processes and coordinates implementation. Comply with all safety requirements; participate in safety training/practices. Qualifications: 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. Understanding of QA requirements, processes, practices and systems. Demonstrated ability to work in team-based environments. Ability to read engineering drawings to determine and measure features and tolerances. Strong written and verbal communication skills in English. Software experience; Excel, Word, Power Point, etc. Bilingual - English/Spanish Perks and Benefits: Desired first shift schedule Premium Health Insurance - $0 employee premium & $0 deductible Company provided life insurance for all employees with $0 employee contribution Dental 10 paid holidays 5 paid sick days Accrued vacation 401(k) Profit Sharing Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

Temp Schedule: Monday-Friday, 8:00 AM - 4:30 PM + OT & Weekends as needed Pay: $18-$19/hour (DOE) We are currently seeking a detail-oriented and proactive QC Line Inspectors to join our team and help ensure product excellence on the production line. This role plays a critical role in monitoring and verifying product quality during production. This position ensures that all products meet company specifications, customer expectations, and regulatory requirements. You'll work closely with Production and Quality teams to identify and resolve issues in real time. Key Responsibilities: · In-Process Quality Monitoring Inspect products during production to ensure quality standards. Monitor packaging, labeling, and coding accuracy. Verify lot numbers, expiration dates, and weights. · Documentation & Reporting Complete in-process quality check records. Document non-conformances and deviations. Communicate issues to Production and QA Supervisors. · Compliance & Standards Follow GMP, safety, and OSHA/Cal-OSHA guidelines. Ensure compliance with SOPs and customer specs. Support audit and inspection readiness. · Collaboration & Continuous Improvement Assist in implementing corrective actions. Participate in quality improvement initiatives. Help train employees on quality procedures. Qualifications: · Required: Must be bilingual and able to pass E-Verify. High school diploma or GED. 1+ year of QA or manufacturing experience. Strong attention to detail and ability to work in a fast-paced environment. Ability to read SOPs, batch records, and specs. Basic computer skills. · Preferred: Experience in GMP, ISO, and FDA-regulated environments. Familiarity with inspection tools (scales, calipers, gauges). Knowledge of ERP or quality management systems. Physical & Environmental Requirements: Ability to stand for long periods. Occasional lifting up to 25 lbs. Exposure to manufacturing environments.

Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule This is a 3 - 4 x 11 rotating shift working alternating Wednesdays. Shifts Available Sun - Wed 1st shift (5am - 4:30pm) Sun - Wed 2nd shift (4pm - 3:30am) Wed - Sat 1st shift (5am - 4:30pm) Wed - Sat 2nd shift (4pm - 3:30am) Purpose This Lead role is accountable for driving inspection excellence across the organization. In addition to performing complex metrology work, this position provides day-to-day leadership, mentorship, and coordination for the inspection team. The Lead ensures high standards are upheld, inspection priorities are managed effectively, and knowledge is developed across the team. Through technical expertise and a hands-on presence, you will guide peers, foster collaboration, and deliver accurate inspection results that ensure compliance with engineering specifications. The Role Perform advanced inspection and metrology work using scanners (FARO, Romer, Creaform, GOM, etc.) and 3D software (PolyWorks, Zeiss). Deliver accurate inspection files, data, and reports to ensure compliance with engineering requirements. Lead by example through direct hands-on inspection work (at least 50% of shift). Receive and provide clear shift handoffs with both written and verbal updates to maintain continuity. Prioritize and delegate daily tasks, balancing team capacity and operational needs. Conduct spot checks, provide feedback, and uphold high-quality standards across the team. Mentor and train peers, including onboarding of new inspectors and cross-training initiatives. Maintain situational awareness of work progress, equipment status, and team needs throughout the shift Foster a positive, collaborative team culture, demonstrating emotional intelligence and conflict resolution skills. Ensure the Metrology Lab remains clean, organized, and safe in alignment with 5S practices. Basic Qualifications Ability to lawfully access information and technology that is subject to US export controls Minimum 2-3 years of experience in a Quality Inspection or Metrology role in aerospace, automotive, or other high-precision production environment. High-school diploma (required). Proficiency in computer systems (Windows, Teams, Excel, etc.). Strong ability to interpret engineering drawings, GD&T, and specifications. Physical ability to lift up to 50 lbs and operate scanning equipment for extended periods. Excellent written and verbal communication skills. Strong problem-solving and analytical mindset. Team-first approach with proven ability to lead by example. Preferred Qualifications Associate degree or higher in a technical field, or equivalent work experience. Prior experience in a lead, mentoring, or training capacity. Background in cross-functional collaboration with Quality, Engineering, and Production teams. Experience in regulated or high-performance manufacturing environments. Work Environment This role is based in a dynamic manufacturing setting and may require standing and handling precision equipment for extended periods of time. Must be able to lift at least 25 lbs. Company Uniform must be worn while working. PPE must be worn while working. Compensation At Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels ABC - XYZ as evaluated through our interview process. Lead Technician / T04: $29.00 - $40.00 Senior Technician / T05: $32.00 - $44.00 Pay Range$29-$44 USD What We Offer: Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.