Quality inspector jobs in Edison, NJ - 218 jobs

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job Title: Quality Control InspectorDETAILS: Duration: 6 months Contract temp to Permanent Salary: $26 - $33/hr depending on experience Benefits: Option benefits cafeteria style until permanent Shift: 1st Shift 7am -4pm. We are currently seeking a Quality Control Inspector in Brooklyn, NY.Responsibilities: Perform Quality Control (QC) inspections on parts and sub-assemblies of rail cars. Conduct visual inspections to ensure conformance to quality standards and identify non-conformances. Follow engineering drawings, written procedures, and verbal/written instructions. Use measuring instruments such as scales, tape measures, calipers, micrometers, and combination squares to inspect parts and equipment for proper installation on rail car bodies. Proficient in using both English and Metric measurement systems. Record inspection data and findings accurately in inspection reports and related documentation. Demonstrate excellent mechanical aptitude and attention to detail. Inspection Phases: Receiving Part Fabrication Metal Matching Sub-assembly Shell Assembly Truck Assembly & Test Interior and Cab Exterior Under-floor Source Requirements: Minimum of two (2) years of experience in a QC inspection role. Ability to work independently and conduct final inspections on an entire rail car. Proficiency with measuring instruments (tape measures, calipers, micrometers, etc.). Ability to read, write, and speak English and interpret engineering drawings (blueprints). Must be proficient in the English measurement system and able to learn the Metric system within a specified period. Capable of working in an active manufacturing environment, climbing stairs and ladders, and lifting, pushing, or pulling up to 40 lbs. Work Environment: The work environment includes a combination of indoor and outdoor settings in an active manufacturing facility. Strict adherence to safety protocols and quality standards is required to ensure a safe and productive workplace.Company Overview: Founded in 2010, Top Prospect Group was created with a focus on matching high-quality candidates with top clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology and professional services. Qualified candidates are encouraged to apply immediately! Please include a clean copy of your resume, salary expectations, and any references in your application.

At Corbion, we exist to champion preservation in all its forms, preserving food and food production, health, and our planet. The Quality Control Technician is a 2nd shift position based at the Totowa, NJ plant reporting to the Quality Control Supervisor. This role is responsible for performing daily analytical tests, pre-operation and line audits, and ensuring production procedures and systems are followed. The position ensures that all quality standards are consistently met while supporting the development of QC team members. Essential Functions * Follow all GMP's (Good Manufacturing Practices), FSMA, Safety, and Environmental regulations as well as company policies. * Maintain positive attitude. Focus on the customer, teamwork, and quality productivity. * Give recommendations to improve workplace safety, efficiency, and to better serve the customer. * Analyze finished product for various analytical testing including redox, Chittick, pH, %moisture, color, titratable acid (TA), enzymes, vitamins, proteins, etc., on a daily basis. * Daily verification/calibration of lab equipment prior to testing finished product to ensure product quality. * Maintain the cleanliness of the lab making sure that the areas are clean after testing. * Ensure that lot codes and finished products package is correct and legible. * Product that has been analyzed and does not meet specification, must be re-sampled and re-analyzed immediately. If product is not in compliance, HOLD stickers must be applied immediately and system hold activated. * Participate in and successfully complete all required laboratory training classes. * Complete the picking, testing and approval of raw materials, issuing deviation when the material is out of specification and reporting to the supervisor/manager. * Keeping record of the materials that need to be tested for micro and send the samples on time. * Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Education & Experience * Bachelor's Degree in Chemistry, Bio-Chemistry, Chemical Engineering, Biology or Microbiology. * Experience in a laboratory environment within a related industry is required. * SAP/Sample Manager experience preferred. Knowledge, Skills and Abilities * Strong analytical and problem-solving skills. * Knowledge of laboratory testing procedures and equipment calibration. * Ability to maintain compliance with GMPs, FSMA, HACCP, and company policies. * Strong communication and teamwork skills. Working Environment * Manufacturing plant with large open floor areas and loud machinery. * Exposure to high temperatures in summer and cold environments in winter. * Dusty environment due to raw materials. * Exposure to allergens including eggs, soy, sesame seeds, milk, and wheat. Physical Demands * Must wear GMP-compliant hair and beard nets, company-provided uniforms, gloves, and, in some areas, respirators. * Ability to stand for long periods and perform repetitive laboratory or line auditing tasks. * Must be able to lift up to 55 lbs. Our offer The below reflects the range of possible compensation for this role at the time of this posting. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, performance, location and business or organizational needs. The base salary range for this role is $24.00 to $25.00 per hour. In addition, we offer: * Variable bonus potential * Paid time off, including company holidays * Medical, dental and vision coverage * 401K with company match * Education assistance * Short- and long-term disability * Employee Assistance Program (EAP) About Corbion Corbion is the global market leader in lactic acid and its derivatives, and a leading supplier of emulsifiers, functional enzyme blends, minerals, vitamins, and algae ingredients. We use our unique expertise in fermentation and other processes to deliver sustainable solutions for the preservation of food and food production, health, and our planet. For over 100 years, we have been uncompromising in our commitment to safety, quality, innovation and performance. Drawing on our deep application and product knowledge, we work side-by-side with customers to make our cutting-edge technologies work for them. Our solutions help differentiate products in markets such as food, home & personal care, animal nutrition, pharmaceuticals, medical devices, and bioplastics. In 2024, Corbion generated annual sales of €1,288.1 million and had a workforce of 2,399 FTE. Corbion is listed on Euronext Amsterdam. For more information: *************** Corbion is an equal opportunity employer and committed to a diverse workplace. All applicants will be considered equally without regard to race, color, ethnicity, veteran status, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, handicapping condition, membership in an organization or any other non-merit factors. Corbion provides reasonable accommodation to applicants. EOE/M/F/Vet/Disabled Corbion does not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. All candidates must be submitted by approved Corbion vendors who have been expressly requested to make a submission by our Talent Acquisition team for a specific job opening. No placement fees will be paid to any firm unless such a request has been made by the Corbion Talent Acquisition team and such candidate was submitted to the Corbion Talent Acquisition Team.

Job SummaryVisual and dimensional inspection of customer materials, system/process audits, non-conformance investigation.Job Description Key Accountabilities: Accurately inspect materials and products with gauges, scales, or other measurement instruments as required and according to work instructions. Management of non-conforming parts or material. Maintain the system for the documentation for work performed. Perform data entry of work results into appropriate databases. May be required to identify causes of non-conformance. Ability to access and work in SAP or other Warehouse Management System. Meets TKMNA Employee Attributes/Competencies. The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as “safety sensitive” by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements: This position requires access to export-controlled technical data or technology. Employment is contingent upon obtaining any required export authorization from the appropriate government agency or agencies. When export authorization is necessary, the length of time to obtain the authorization by the government is outside of the Company's control. Prior experience using basic measurement instruments and blueprint interpretation. Prior experience in a quality assurance inspection position. Prior experience with CMM inspection equipment. Ability to read and write English and perform basic math problems. Basic computer knowledge to complete data entry. Attention to detail and accuracy. Ability to accurately inspect material, commodities, and/or processes. Preferred requirements: Some college courses or certificates in Quality Assurance-related field of study Benefits Overview We offer competitive company benefits to eligible positions, such as : Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) and RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

Job Description Mission Serve as a senior technical authority in dimensional inspection, measurement systems, calibration, and CMM programming. This role ensures that every inspection method, measurement tool, and calibration activity is accurate, compliant, and capable-directly protecting PTI's ability to deliver precision injection-molded components for aerospace, defense, and highly regulated industries. Competencies - What This Person Must Be Master Inspector & Metrology Expert: Advanced skills in dimensional inspection, GD&T, CMM (Calypso), vision systems, fixtures, and measurement troubleshooting. Calibration & Measurement System Owner: Ensures all tooling, gages, fixtures, and instruments are accurate, controlled, and compliant with AS9100 requirements. Process-Minded Technician: Understands how inspection results impact production capability, customer acceptance, and risk. Detail-Oriented & Documentation-Driven: Produces accurate records for calibration, inspection plans, tooling status, and measurement traceability. Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability. Leadership & Mentorship: Guides Level 1 and Level 2 inspectors and supports training on measurement equipment, methods, and inspection strategies. Key Responsibilities Perform highest-complexity inspections and make final accept/reject decisions. Create, update, and control inspection plans, visual standards, and metrology work instructions to help standardize inspection practices across the department. Program and operate Zeiss CMMs (Calypso), OGP/Keyence vision systems, and other automated measurement platforms. Develop fixturing concepts or collaborate with Engineering on inspection fixture design. Troubleshoot measurement discrepancies, CMM program errors, and complex geometry issues. Lead inspection readiness for customer source inspections, audits, and critical part reviews. Own and oversee calibration ensuring all gages, fixtures, and measurement systems are properly maintained, scheduled, fully documented, compliant with AS9100, and supported through effective management of calibration records, out-of-tolerance investigations, and external vendor relationships. Participate in dimensional-related root cause analysis, contributing measurement expertise during 8D, corrective action, and customer inquiries. Ensure all inspection processes meet customer and regulatory requirements. Train and mentor Level 1 and Level 2 inspectors on GD&T, inspection techniques, and equipment use. Key Metrics & KPI's ≥ 98% Quality Shipments. 100% on-time completion of assigned inspections. Zero escapes on parts inspected or approved. Improved inspection efficiency and accuracy year-over-year. 100% compliance with safety and quality procedures 100% calibration compliance Documented completion of inspector training and demonstrated skill improvement Required Experience and Qualifications (Subject to Management Discretion) High school diploma or equivalent; technical degree preferred. 5+ years of advanced inspection experience with strong GD&T and blueprint mastery Hands-on CMM programming using Zeiss Calypso Experience with OGP/Keyence or similar optical/vision systems Experience with calibration system maintenance/management (GAGETrak preferred), Strong communication, teamwork, and leadership skills. Preferred Qualifications ASQ Certified Quality Technician (CQT), Certified Quality Inspector (CQI), or metrology-related certification. Experience in aerospace, defense, or medical device manufacturing. Physical Requirements Ability to work in both office and manufacturing floor environments. Capable of lifting up to 40 lbs and accessing production and inspection equipment. Manual dexterity for handling tools, parts, and inspection equipment. Visual acuity sufficient to read documents, use computer screens, and inspect products or components. Work Environment Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations. Requires use of PPE, including safety glasses, gloves, and hearing protection. Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation's leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what's possible. If you can imagine it, we can build it. PTI Tech supports some of the world's most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech's family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation's leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what's possible. If you can imagine it, we can build it. PTI Tech supports some of the world's most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech's family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for an amazingly talented Quality Inspector to join our team! In this role you will get to work on the premier infrastructure project in the Country, as well as receive all of the benefits of working for Parsons! This Program is a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark NJ and NYC. Program background The Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project. As a tri-venture partner with Parsons, Arcadis, and Mace (MPA) is the Delivery Partners (DP)to provide advice, leadership, and support to GDC for the development and implementation of HTP. This is a master service with task order contracts for a 15-year contract encompassing a broad range of strategic advisory services, project management, design management, construction management, stakeholder coordination, federal compliance, operations support, office administration, and related services. What You'll Be Doing: * Conduct daily inspections of construction activities, including excavation, concrete work, tunnel lining, utilities, and other structural elements * Verify materials, equipment, and workmanship meet project specifications and approved submittals. * Prepare quality inspection reports * Collaborate with safety teams to ensure that inspections align with health, safety, and environmental regulations. * Coordinate independent testing. * Coordinate contractor, subs and stakeholder field operations. * Enforce safety standards on-site, including adherence to OSHA and other regulatory safety protocols. * Identify potential safety hazards, report violations, and ensure contractors follow site-specific safety plans, especially around large shafts and excavation zones. * Inspect materials and equipment used for excavation and tunneling, checking for compliance with quality standards. * Document and report any deviations or deficiencies, working closely with contractors to address issues promptly to ensure quality throughout the project. * Maintain detailed records of daily work activities, site conditions, and inspection results. * Provide regular reports on progress, any issues encountered, and corrective actions taken, ensuring documentation aligns with project requirements. * Work closely with construction supervisors and engineers to address any concerns that arise during inspection. * Communicate inspection findings and collaborate on solutions to on-site issues, such as unexpected ground conditions or equipment adjustments. What Required Skills You'll Bring: * 10+ years experience * This role demands a solid background in heavy civil construction with a focus on large shafts, tunnel lining, utilities, and excavation * Requires being on-site for the majority of the time to provide continuous oversight What Desired Skills You'll Bring: * Bachelor's Degree in related field * Experience with Mega Projects in the Rail and Transit industry * Experience working with multiple partners and clients * Tunneling experience a plus Security Clearance Requirement: None This position is part of our Critical Infrastructure team. For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next! Salary Range: $48.51 - $84.90 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

Night Owl Needed! Be the Quality Guardian of Our Growing Team - Competitive Benefits Package! Do you have a keen eye for detail and thrive in a fast-paced environment? Are you a night owl looking for a challenging and rewarding career with a comprehensive benefits package? Then we want YOU on our team! As a Quality Inspector (Night Shift) , you'll be the guardian of our quality standards in a great custom plastic manufacturing environment , ensuring every product meets our high expectations. You'll perform inspections, maintain records, and collaborate with the team to keep our production line running smoothly. This is your chance to: Be a key player in a rapidly growing company Work alongside a supportive and collaborative team in a great custom plastic manufacturing environment Develop your skills and knowledge in quality control Make a real difference in the quality of our products Here's a glimpse into your world: Additional $3 per hour shift differential Inspect parts and ensure they meet specifications Maintain detailed records and document processes Help develop and implement quality standards And more! To be successful, you'll need: 3+ years of experience as a Quality Inspector A high school diploma (or equivalent) Strong attention to detail and a commitment to quality Excellent analytical and problem-solving skills Ability to work independently and as part of a team Willingness to learn and continuously improve Familiarity with ISO 9001:2015, cGMP standards a plus Bonus points if you have: Experience working in a cleanroom environment Knowledge of SQF standards Experience with gauge calibration or training others Benefits: Medical, Dental & Vision Insurance: We offer comprehensive health coverage options to keep you and your loved ones well. Company-Paid Life Insurance: We've got your back, with life insurance coverage included. Optional Voluntary Benefits: Tailor your benefits package to your needs with a variety of additional options. Paid Time Off & Paid Holidays: Recharge and relax with paid time off and holidays. 401(k) with Company Match: Save for your future with our retirement plan and a company match on your contributions. Profit Sharing: Share in the company's success with our profit-sharing program. Ready to join our growing team? Apply today and let's make quality happen - together!

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.

Job Description We are seeking a Lead Inspector / Risk Assessor to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency. Responsibilities: Perform thorough examinations of all materials and finished products Conduct and report internal audits and evaluations Identify and troubleshoot equipment problems and defects Participate in routine visual inspections Maintain a clean and safe work environment Qualifications: Previous work experience in quality control or other related fields Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication skills a must Valid EPA lead license Asbestos inspector license preferred, if not then a Bachelor's degree preferred or minimum Associate's degree To be considered, please click "Apply Now."

Changing lives. Building Careers. Joining us is a chance to do important work that creates change and shapes the future of healthcare. Thinking differently is what we do best. To us, change equals opportunity. Every day, our colleagues are challenging what's possible and making headway to innovate new treatment pathways to advance patient outcomes and set new standards of care. The Quality Inspector II will be responsible for performing quality assurance inspections on purchased components, manufactured sub-assemblies and final product. The Quality Inspector will perform all duties in accordance to the requirements of overall corporate policies, FDA regulations, ISO 9001, ISO 13485, the medical device directive, and the other applicable regulatory agencies. Expectations are to be familiar with and able to measure critical dimensions. ESSENTIAL DUTIES AND RESPONSIBILITIES Perform inspection by using a variety of inspection measuring and test equipment to determine acceptance or rejection of material or parts. Perform first article, incoming/receiving, and in-process inspections of materials or parts; determine acceptance or rejection after inspection and/or testing of materials, parts, and/or equipment. Interpret and work within the guideline of drawings, specifications, charts, procedures, and other data to determine acceptance or rejection of materials. Read and interpret sampling pan as per the American national standard institute (ANSI), Assist in the review and disposition of non-conforming material and customer returned material, including rework, scrap, and return to vendor. Maintain accurate and current inspection and/or testing records such as nit not limited to Material Certifications, Inspection/Test Results and reports, Certificates of Conformance, Rejection reports/tags, as required by applicable procedure and/or specification. Coordinate and inform other departments of inspection and/or testing status in support of production and project goals and initiatives. Promote and participate in continuous improvement initiatives. Responsible for the maintenance of appropriate conditions of all quarantine locations. Maintain the QC inspection areas in an orderly fashion conducive to carrying out safe and efficient inspections and procedures. Inspection requirements include training and working in classified clean rooms as necessary to perform in process inspections. Maintain records of inspection and all testing performed on the appropriate test records. Perform line clearances and quality reviews in manufacturing, labeling, or other assigned areas during manufacturing activities. Identify and implement opportunities for continuous improvement, including document revisions in order to maintain accurate SOPs. Provide quality support to various departments as needed, e.g. engineering, product development, etc.) Assist in training new associates according to the Quality System Regulations and company SOPs as applicable. May also perform other related duties, responsibilities, and special projects as assigned. DESIRED MINIMUM QUALIFICATIONS Associate degree in science is preferred. 3-7 years of relevant GMP/GLP experience specific to incoming, line clearance, in-process, and finished goods inspections in pharmaceutical or medical device industry. QA experience in the medical device industry preferred. Must have strong written and verbal communication skills. Strong organizational skills, self-directed, strong problem solving and interpersonal skills. Knowledge of CAPA, Validations, Change Control, preferred. Working knowledge of ISO 13485, 21CFR820 FDA QSR, and cGMP. Knowledgeable in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) preferred. Salary Pay Range: $21.12 - $27.98 USD Hourly Our salary ranges are determined by role, level, and location. Individual pay is determined by several factors including job-related skills, experience, and relevant education or training. In addition to base pay, employees may be eligible for bonus, commission, equity or other variable compensation. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Additional Description for Pay Transparency: Subject to the terms of their respective plans, employees and/or eligible dependents are eligible to participate in the following Company sponsored employee benefit programs: medical, dental, vision, life insurance, short- and long-term disability, business accident insurance, and group legal insurance, and savings plan (401(k)). Subject to the terms of their respective policies and date of hire, Employees are eligible for the following ******************************************* Integra LifeSciences is an equal opportunity employer, and is committed to providing equal employment opportunities to all qualified applicants and employees regardless of race, marital status, color, religion, sex, age, national origin, sexual orientation, physical or mental disability, or protected veteran status. This site is governed solely by applicable U.S. laws and governmental regulations. If you'd like more information on your rights under the law, please see the following notices: EEO Is the Law | EOE including Disability/Protected Veterans Integra LifeSciences is committed to provide qualified applicants and employees who are disabled veterans or individuals with disabilities with needed reasonable accommodations in accordance with the ADA. If you have difficulty using our online system due to a disability and need an accommodation, please email us at ***********************. Unsolicited Agency Submission Integra LifeSciences does not accept unsolicited assistance from search firms for employment opportunities. All CVs/resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. A formal written agreement is required before engaging any agency, and it must be executed and authorized by the Vice President, Talent Acquisition. Where agency agreements are in place, introductions (the initial sharing of a candidate's name, resume, or background) are position-specific and may only occur within the scope of that approved agreement. Please, no phone calls or emails. Integra - Employer Branding from Integra LifeSciences on Vimeo

Job Title: Quality Control (QC) Inspector Company: Hansome Energy Systems Employment Type: Full-Time Hansome Energy Systems is a privately held industry leader in rotating electrical machinery, proudly supporting the U.S. Navy and other critical defense and industrial applications. We specialize in high-performance, precision-engineered equipment designed, built, and inspected to perform in the most demanding environments. Our commitment to quality, reliability, and mission readiness is the foundation of our work. Location & Facility Transition This position is currently based at our Linden, NJ facility and will be relocating to our new East Windsor, NJ facility. Candidates must be able to work in Linden during the transition and remain with the company through the move. Position Overview Hansome Energy Systems is seeking a highly detail-oriented Quality Control (QC) Inspector to ensure that mechanical and electrical components meet stringent defense and industrial quality standards. This role is critical to ensuring product reliability, regulatory compliance, and flawless execution of mission-critical equipment. The QC Inspector will perform dimensional inspections, documentation review, in-process checks, and final inspections. Key Responsibilities Perform incoming, in-process, and final inspections on mechanical, electrical, and precision-machined components. Verify parts and assemblies against drawings, specifications, and quality standards. Use precision measurement tools such as calipers, micrometers, height gauges, bore gauges, dial indicators, and other inspection equipment. Inspect for workmanship, proper assembly practices, dimensional accuracy, and material conformity. Document inspection results, discrepancies, and nonconformances clearly and accurately. Assist with root-cause investigations and corrective actions when defects are detected. Review manufacturing documentation such as travelers, work instructions, certificates of compliance, and material certifications. Ensure products meet all requirements before release to the next production stage. Collaborate closely with production, engineering, and quality teams to resolve issues. Support continuous improvement and maintain compliance with internal and external quality requirements. Qualifications Required High school diploma or equivalent. 1-3 years of experience in quality inspection or manufacturing. Strong understanding of mechanical drawings, tolerances, and inspection requirements. Proficiency with measurement tools such as calipers, micrometers, and gauges. Strong attention to detail, accuracy, and documentation skills. Ability to lift up to 50 lbs and stand for extended periods. Ability to work in Linden, NJ during the transition and relocate to East Windsor, NJ upon facility move. Must be a US Citizen Preferred Experience in defense, aerospace, or other high-reliability manufacturing environments. Familiarity with quality systems such as ISO 9001 or MIL-STD requirements. Experience with nonconformance reporting (NCR), MRB processes, or internal audits. Basic electrical knowledge or experience inspecting rotating electrical equipment. Experience with statistical process control (SPC) or advanced measurement tools (CMM, height gage, etc.). Work Environment Full-time, on-site QC inspection role. Work involves manufacturing floor, inspection stations, and documentation work areas. Exposure to shop environments, machinery, and moderate noise (with proper PPE). Quality- and safety-focused culture supporting defense and industrial programs. Benefits Competitive compensation Health, dental, and vision insurance Paid time off and holidays Retirement plan options Ongoing training and skill development Opportunity to ensure quality for products supporting U.S. Navy and critical applications How to Apply Qualified candidates are encouraged to submit their resume and/or application to the Hansome Energy Systems hiring team.

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

SUMMARY/OBJECTIVE (Basic purpose of job) The Quality Technician primary responsibility is for carrying out the quality control lab testing for the bottling lines as well as the calibrating and setting up the lab equipment and ensuring results are recorded accurately on computer systems and data sheets. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed must be representative of the knowledge, skills, minimum education, training, licensure, experience and/or ability required. JOB RESPONSIBILITIES Perform quality function audits on all production lines. Ensure products produced conform to specification, food safety, have Good Manufacturing Practices, and adhere to relevant regulatory requirements. Perform all microbial sampling and testing for incoming raw materials and finished products. Advise production on out of specification packaging, raw materials and process deviations. Ensure all production operations operate to highest quality standards Be responsible for plating of samples, analyzing, interpreting and reporting results for all bottling, tanks. Record production information as required. Ensure accurate records are kept and maintained of all specifications and test results. Keep laboratory equipment maintained and operating efficiency and safely according to all health and safety standards. Support cleanliness and sanitation of Quality Lab, Batching Area, Production lines, Sugar and RO room. Keep all work areas clean and orderly. All other duties, as required or needed. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to talk or hear and see. The employee frequently is required to stand; walk; use hands to finger, handle or feel and reach with hands and arms. The employee must regularly lift and/or move objects up to 40 pounds. JOB REQUIREMENTS HSD, College Degree preferred 2-3 years' experience as a Lab Technician Excellent attention to details Good interpersonal and communication skills Ability to work as part of a team Good statistical and numerical ability Please note this Job Description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Quality Inspector - 3rd Shift Join a quality‑driven manufacturing and laboratory environment where your attention to detail directly impacts product integrity and customer satisfaction. As a Quality Inspector, you'll play a key role in verifying incoming materials, supporting lab operations, and ensuring compliance with cGMP and QA standards. What You'll Do * Inspect incoming components and lab‑prepared samples to verify compliance with specifications, including appearance, dimensions, and overall integrity. * Perform sampling and submission activities, including pulling samples from multiple pallets, completing submission forms, and making pass/reject decisions based on lab test results. * Document all inspection activities accurately and consistently in alignment with SOPs, QA requirements, and audit expectations. * Maintain compliance within the lab, ensuring proper labeling, cleanliness, and adherence to cGMP protocols. * Assist with investigations related to out‑of‑spec results and support corrective and preventive action (CAPA) efforts. * Collaborate with QC team members to uphold a strong culture of safety, accuracy, and continuous improvement. Top Skills & Experience * Component and material inspection * Quality Control / Quality Assurance * Laboratory environment experience * GMP knowledge and compliance * Strong documentation and organizational skills Additional Qualifications * Ability to work independently while maintaining high attention to detail * Experience with component‑level inspections and lab‑based quality systems * Strong communication skills and a commitment to accuracy and consistency Experience Level * Intermediate level; prior QC or inspection experience preferred This position is moving fast! If interested please send over your updated resume to carendas @actalentservices.com with your availability for a 5 minute phone screen. Job Type & Location This is a Contract to Hire position based out of Wharton, NJ. Pay and Benefits The pay range for this position is $23.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Wharton,NJ. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Inspect, test, or measure materials or products being produced Performing and Approving the quality of raw materials before manufacturing begins Read and understand blueprints and specifications Monitor or observe operations to ensure that they meet production standards Recommend adjustments to the process or assembly Measure products with rulers, calipers, gauges, or micrometers Accept or reject finished items Remove all products and materials that fail to meet specifications Discuss inspection results with those responsible for products Report inspection and test data Attention to details Do incoming, in-process, and final inspection Perform Receiving, 1st Piece and In-Process Inspections for work in process during manufacture Verify and document that materials are manufactured to blueprint requirements Maintain acceptable quality levels during manufacture of products and assemblies Undertake special projects and other duties as assigned Requirements: 3 - 5 years work experience or related work experience required Education - College degree or equivalent Must have ability to identify and resolve problems, effectively manage change and deal with conflict in a fast paced environment Proficiency with calipers, micrometers, perform First Article inspection in accordance with AS9100 in process and final inspection processes a plus Knowledge of operating electronic inspection equipment, such as coordinate-measuring machines (CMMs) a plus Must be self-motivated and have the ability to work independently, within prescribed guidelines, or as a team member Knowledge of MRP software systems and experience with enterprise resource planning (ERP) system a plus Working knowledge of ISO 9001, 5S and/or Lean Manufacturing a plus Aerospace product knowledge a plus Must be a U.S. Citizen or Lawful Permanent Resident Company DescriptionREQUIREMENTS • Must be a U.S. Citizen or a Green Card holder COMPANY OFFERS •\tGrowing Backlog •\tCompetitive Rate Structure (Depending on Ability and Experience) •\tTrainings •\tGreat Health, Dental and Vision Benefits, Life Insurance Package •\tProfit Sharing and Bonuses •\t401K Matching •\tSafety Equipment •\tModern Equipment and Attractive Shop •\tEqual Employment OpportunityCompany DescriptionREQUIREMENTS\r • Must be a U.S. Citizen or a Green Card holder\r \r COMPANY OFFERS\r •\tGrowing Backlog\r •\tCompetitive Rate Structure (Depending on Ability and Experience)\r •\tTrainings\r •\tGreat Health, Dental and Vision Benefits, Life Insurance Package\r •\tProfit Sharing and Bonuses\r •\t401K Matching\r •\tSafety Equipment\r •\tModern Equipment and Attractive Shop\r •\tEqual Employment Opportunity

TopView Sightseeing is seeking a sharp, reliable, and observant Quality Control Inspector to help maintain high service standards across our sightseeing operations, including bus, boat, and bike tours. This full-time, field-based role plays a key part in ensuring safe, high-quality experiences for thousands of daily customers across New York City. Responsibilities: Conduct undercover inspections of service quality across all TopView locations and brands Monitor employee conduct and adherence to safety protocols and company standards Perform passenger counts and compile data for internal industry analysis Inspect competitor operations and provide detailed reports Document and report inspection results, policy violations, and improvement suggestions Collaborate with operations leadership to enhance service quality Requirements: High school diploma or GED Experience in supervision, inspection, or monitoring preferred NYC tourism experience is a plus Strong attention to detail and ability to collect and report accurate data Must have a smartphone and familiarity with Google Apps Professional, trustworthy, and presentable Excellent communication skills and a proactive attitude Must be comfortable working 100% in the field, including weekends and holidays Benefits: Health insurance 401(k) Paid time off Join a fast-growing company and help shape the quality of NYC's top sightseeing experiences-apply today! Powered by JazzHR AEzMzKURVa

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Chief Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to him by the receiving inspector. 1 Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as dire Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of ten years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check. Direct Reports: This role has direct reports. Work Authorization: Must be authorized to work in the United States of America. Compensation: Competitive pay based on experience Medical including Health, Dental and Vision Short-Term and Long-Term Disability Insurance Paid Holidays Paid Vacation Profit Share Program

Goodwill NYNJ Ecommerce Quality Control - Part time Job Position To receive merchandise and sort & separate items based on quality standards for listing. • Receive incoming totes from stores & record seal information as directed. • Research items online for matching descriptions and value by using different market places. • Accept and reject items based on quality standards. • Use provided manifesting software to print SKUs and safely apply them to a variety of items. • Comply with production expectation. • May need to lift up to 50lbs. • Additional duties as required. • Minimum high school diploma. • Ability to read and write English. • Basic computer & internet research skills. • Ability to deal with change and work in a dynamic environment. • Able to work under minimal supervision and process the expected number totes per day. • Able to work as part of a team involved in the quality control of items for Goodwill's E-Commerce (Online) department. Duties will be performed in an industrial warehouse environment. This job requires you to stand/move for long periods of time. Covid-19 Update - In alignment with New York City's decision to lift the private employer vaccination requirements, effective November 1, 2022, Retail Employees in NYC are now exempt from submitting vaccination proof and/or no longer required of submitting proof of weekly PCR/Antigen(Rapid) testing if they have requested medical/ religious accommodation. Retail stores in NJ and Upstate continue to be exempt as per New Jersey and New York State Guidelines.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for an amazingly talented Quality Inspector to join our team! In this role you will get to work on the premier infrastructure project in the Country, as well as receive all of the benefits of working for Parsons! This Program is a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark NJ and NYC. Program background The Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project. As a tri-venture partner with Parsons, Arcadis, and Mace (MPA) is the Delivery Partners (DP)to provide advice, leadership, and support to GDC for the development and implementation of HTP. This is a master service with task order contracts for a 15-year contract encompassing a broad range of strategic advisory services, project management, design management, construction management, stakeholder coordination, federal compliance, operations support, office administration, and related services. What You'll Be Doing: * Conduct daily inspections of construction activities, including excavation, concrete work, tunnel lining, utilities, and other structural elements * Verify materials, equipment, and workmanship meet project specifications and approved submittals. * Prepare quality inspection reports * Collaborate with safety teams to ensure that inspections align with health, safety, and environmental regulations. * Coordinate independent testing. * Coordinate contractor, subs and stakeholder field operations. * Enforce safety standards on-site, including adherence to OSHA and other regulatory safety protocols. * Identify potential safety hazards, report violations, and ensure contractors follow site-specific safety plans, especially around large shafts and excavation zones. * Inspect materials and equipment used for excavation and tunneling, checking for compliance with quality standards. * Document and report any deviations or deficiencies, working closely with contractors to address issues promptly to ensure quality throughout the project. * Maintain detailed records of daily work activities, site conditions, and inspection results. * Provide regular reports on progress, any issues encountered, and corrective actions taken, ensuring documentation aligns with project requirements. * Work closely with construction supervisors and engineers to address any concerns that arise during inspection. * Communicate inspection findings and collaborate on solutions to on-site issues, such as unexpected ground conditions or equipment adjustments. What Required Skills You'll Bring: * 10+ years experience * This role demands a solid background in heavy civil construction with a focus on large shafts, tunnel lining, utilities, and excavation * Requires being on-site for the majority of the time to provide continuous oversight What Desired Skills You'll Bring: * Bachelor's Degree in related field * Experience with Mega Projects in the Rail and Transit industry * Experience working with multiple partners and clients * Tunneling experience a plus Security Clearance Requirement: None This position is part of our Critical Infrastructure team. For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next! Salary Range: $48.51 - $84.90 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************