Quality inspector jobs in Fort Collins, CO - 47 jobs

A Day in Your Life at MKS: As a Mechanical Quality Inspection Technician 5 at MKS Instruments, you will work in our fast-paced inspection department. You will be leading the QA inspection team, developing the inspection approach and methods for new products, standardizing and documenting practices, and developing the skills of the inspection team. In this role, you will report to the Sr Manager, Quality Engineering. Principal Responsibilities: • Plans and directs the activities related to the inspection functions in a manner which meets company standards and methods • Prioritizes schedules based on product introduction and schedules, communicates commitment with operations, while maintaining a minimum turnaround time - Develops CMM programs (PC-DMIS) to support mechanical inspection of parts. • Responsible for performing first detailed inspection of incoming or purged parts, materials, components, assemblies, equipment, and document results • Coordinates the collection and disposition of purged material • Determines or assists in determining and documenting methods, sequences and procedures necessary for inspection • Works from written procedures, drawings, sketches and specifications • Generates Engineering Change Requests to correct drawing issues noted during inspection • Adapts inspection measuring devices and procedures where necessary • Provides training and guidance to Inspection staff • Provides reports on productivity of inspection area • Provides support for Customer/Registrar audits Required Skills: • 8+ years of related experience Physical Demands & Working Conditions: • Perform activities such as sitting, standing, or typing for extended periods of time • Regularly requires good manual dexterity and coordination • Occasionally moves/positions objects up to 40 lbs • Ability to remain in a stationary position for 30% of the time • Must be able to communicate information and ideas so others will understand • Regularly requires manual dexterity and coordination of objects below, at and above shoulder level • Must be able to exchange accurate information • Operates in a laboratory/manufacturing environment • Ability to observe documents and details at close range (within a few feet of the observer) • Constantly operates a computer and other office productivity machinery • Dedication to safety to mitigate hazards, including handling mechanical and electrical hardware, high voltage, gas, water, and heat • Noise level in the work environment is usually average Hourly Pay Range: $35-53 per hour. This range is a good faith estimate of the expected salary range for this position, based on a wide range of factors including qualifications, experience and training, operational and business needs and other considerations permitted by law. At MKS, it is not typical for an individual to be hired at or near the top of the range for the role. #LI-AS1 Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants for these positions may need to be “U.S. persons.” “U.S. persons” are generally defined as U.S. citizens, noncitizen nationals, lawful permanent residents (or, green card holders), individuals granted asylum, and individuals admitted as refugees. MKS Inc. and its affiliates and subsidiaries (“MKS”) is an affirmative action and equal opportunity employer: diverse candidates are encouraged to apply. We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. Hiring decisions are based on merit, qualifications and business needs. We conduct background checks and drug screens, in accordance with applicable law and company policies. MKS is generally only hiring candidates who reside in states where we are registered to do business. MKS is committed to working with and providing reasonable accommodations to qualified individuals with disabilities. If you need a reasonable accommodation during the application or interview process due to a disability, please contact us at: accommodationsat *************** . If applying for a specific job, please include the requisition number (ex: RXXXX), the title and location of the role

Tendeg LLC is an engineering-driven company that designs and builds high-performance antenna systems and precision structures for space missions. Our work supports communications, sensing, and data delivery in demanding orbital environments, with applications ranging from weather forecasting and Earth science to global connectivity, national security, and scientific exploration. Our hardware is flight-proven, with more than 25 antennas currently on orbit and a portfolio of deployable apertures that spans multiple sizes and frequency regimes. As we scale manufacturing to meet growing demand, we re building a team focused on disciplined execution, technical rigor, and delivering hardware that works. If you re interested in joining a growing team that designs and builds the infrastructure behind modern space missions, we d like to hear from you. Tendeg s Philosophy We encourage innovation and entrepreneurial energy. We are successful because we take a unique approach to solving problems. We look for creative thinkers and self-motivated people that can collaborate within our open team environment. TENDEG is an acronym for TENacious Design and Engineering Group. Obviously, tenacity is another trait we embrace. Title: Quality Inspector Position Type: Full-Time/Non-Exempt Pay Range: $30.00 - $35.10 Hourly (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data) Location: Louisville, CO (Onsite) Position Purpose: As a Quality Inspector II you will be responsible for inspecting electrical wiring harnesses, circuit boards, machine parts and mechanical assemblies used in Tendeg deployable antennas, ground support equipment, test equipment, and/or internal development tools. They work closely with engineers and other technicians to ensure that electrical and mechanical systems function efficiently and reliably, and document non-conformances when they occur. Job Responsibilities: Complies with established job safety practices, policies and procedures as specified in plant and corporate directives for the safe performance of the work assignment. Advises production when inspection results do not meet customer specifications and create non-conformance reports. Performs record keeping duties as required under the direction of the QA Manager. Initiates, reviews, and follows all standard operating procedures (SOPs) for area of responsibility. Conduct detailed inspections of aerospace components, structures, systems, and material certifications according to established standards and procedures. Perform visual and dimensional inspections using precision measuring instruments such as calipers, micrometers, and precision measurement equipment. Verify compliance with engineering drawings, specifications, and technical documents. Document inspection results accurately and thoroughly, including any deviations or non-conformities. Collaborate with engineers, technicians, and other team members to document and resolve quality issues. Participate in the development and improvement of inspection processes and procedures. Maintain a clean and organized work environment and ensure proper handling and storage of inspected components. Adhere to safety protocols and regulations at all times to ensure a safe working environment. Establishes and maintains effective work relationships within the department, the division, the group, and the company. Complies with environmental regulations when using, dispensing, or handling hazardous and non-hazardous materials and wastes. Perform other duties as assigned. Required Skills, Qualifications and Education: 3-6 years of experience High school diploma or equivalent; technical education or certification in aerospace technology, quality control, or a related field is preferred. Experience with GD&T, Zeiss CMM, FaroArm, Leica and Micro vu preferred. IPC-620, IPC-610 and J-STD 001 certifications are preferred but not necessary. Strong attention to detail and excellent observational skills. Proficiency in using precision measuring instruments and basic hand tools. Ability to interpret engineering drawings, specifications, and technical documents. Good communication skills and the ability to work effectively in a team environment. Willingness to learn and adapt to new technologies and inspection techniques. Commitment to maintaining high standards of quality and safety. Benefits: As we are growing and investing in our company, we invest in our team. We recognize employee contributions through competitive salaries and bonuses and take pride in taking care of our employees. Here is how we show our appreciation: Generous Paid Time Off Paid Parental Leave Medical/Dental and Vision Insurance Plans Tax Advantage Account (Flexible Spending Account) (FSA) Retirement Savings Plan-Traditional 401(k) Plan Employer Paid Short Term Disability and Basic Life, AD&D Additional Benefit Options Including Voluntary Life and Long Term Disability Employee Assistance Program (EAP) Company SWAG Dog friendly work environment Free company parking Break rooms fully stocked with snacks, drinks, and an espresso coffee machine "Must be a U.S. Person as defined by 22 CFR 120.62." Tendeg LLC is an Equal Employment Opportunity (EEO) employer. All qualified applicants are considered for employment without regard to race, religion, color, sexual orientation, age, disability, marital status, genetic information, national origin, veteran status and any other protected factor. #LI-TENDEG

Join RK as a Quality Inspector - Where Excellence Meets Opportunity At RK, quality isn't just a standard-it's our promise. As a Quality Inspector, you'll be the cornerstone of that commitment, ensuring every project meets the highest level of precision and craftsmanship. This is your chance to work alongside skilled professionals in both shop and field environments, contributing to diverse, impactful projects that shape industries. Self. Made. at RK At RK, Self. Made. isn't a tagline, it's how work gets done. People here build more than projects; they build capability, confidence, and careers they can be proud of. With so much work designed and fabricated in-house, ideas move quickly from concept to shop floor to job site. Teams collaborate across disciplines, solve real-world challenges, and grow through hands-on work that truly matters. RK Company Overview RK Industries is a second-generation family-owned company led by brothers Rick and Jon Kinning. With seven specialized business units working together, we deliver construction, fabrication, manufacturing, and building services with a focus on safety, quality, and craftsmanship. People join RK for the craftsmanship, complexity, and the ability to make a real impact. Our in-house capabilities mean employees see their ideas become real solutions, creating meaningful collaboration and clear visibility into how work gets built. Growth happens through challenging projects, mentorship from experienced builders, and opportunities that stretch your skill set. With RK University, accredited apprenticeships, competitive benefits, and deep community investment, RK offers the stability of a family-owned company with the opportunity and momentum of an industry leader. Position Summary The Certified Welding Inspector (CWI) is responsible for ensuring conformance with internal quality standards and external accreditation requirements (ISO 9001, AISC, and ASME). CWIs conduct inspections, support audits, and collaborate with production teams to ensure high-quality fabrication practices. This role plays a key part in maintaining certifications and creating a culture of continuous quality improvement. The role and responsibilities expand with each level of experience and competency. Role Responsibilities * Responsible for assessing corporate conformance to the Quality Management System (QMS), AISC Certification, and ASME Certification * Assist with all inspection and testing services provided by RK * Monitor activities relating to client expectations of the company. * Report QMS progress, activities, and observations to Quality Manager. * Review plans to ensure they meet building codes, local ordinances and zoning regulations * Monitor construction sites/fabrication facilities to ensure overall compliance * Use survey instruments, testing equipment, and other systems to ensure that product meets code and requirements * Verify alignment, level, and elevation of products * Keep daily logs, including photographs taken during inspection * Provide written feedback related to the findings * Other duties as assigned Qualifications * Indirect supervision. * Fully competent in all conventional aspects of subject matter or functional area. * Plans and conducts work requiring judgment in independent evaluation, selection and substantial adaptation/modification of standards. * Devises new solutions to problems encountered. * Independently performs most assignments with instruction * Receives guidance for unusual or complex problems and supervisor approval for changes in standards. * College/university graduate or equivalent combination of skills and experience generally expected for specified technical roles. * CWI Preferred Minimum Physical Requirements and Accountability * Work outside, inside, and in dusty, noisy and hazardous areas. * Work in high places, tight places, confined spaces and/or other adverse locations. * Climb, balance, squat, kneel and crouch. * Work in all types of weather. * Must have working knowledge of all trade materials and tools. * Ability to lift, move, and/or carry 50 lbs. What Sets RK Industries Apart * Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental * Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition * Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards * Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation * Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis

Manpower is partnering with a Longmont defense contractor to find experienced Printed Circuit Board Inspectors! If you are interested in a stable long term position with the ability to grow your skill set, please apply! Quality Inspector 1st Shift - Monday-Thursday and every other Friday Pay - $20-24/hr based on experience Essential Duties and Responsibilities: + Attention to fine detail + Near vision must meet Snellen 14/18, (20/30) or jaeger 2 in at least one eye, natural or corrected (with glasses is acceptable) + To read and effectively communicate in English + Examine product to verify conformance to workmanship standards and assembly drawings using magnification (scope and/or ring light) for up to 8 hours a day + Provide critical feedback to promote process improvements + Reference standards (IPC / J-STD) to verify solder joint compliance to product class + Read and understand process documentation to ensure the methods of verifying product are in alignment with expectations + Basic computer skills and learn new software applications to monitor and document nonconformances + Support team to produce high quality product by reviewing and provided feedback to upsteam processes + Other duties as assigned **Qualifications** Job Knowledge, Skills & Abilities: + Ability to navigate in different software applications + Ability to work effectively as part of a team + High attention to detail + Ability to lift up to 15 lbs. on a regular basis + Ability to inspect product through magnification for up to 8 hours a day + Ability to adapt to changing requirements and methods + Willingness to learn new skills and methods to verify product quality + Document non-conformances on 1st piece inspections Experience/Education: + High school diploma or equivalent preferred + 2+ years of electronics' experience minimum preferred + Experience with measuring devices preferred Job Opportunities + Will be provided with recurring certification for industry standards + Will be provided with on-the-job training to ensure compliance with processes and work instructions + Opportunities for cross training after introductory period **Apply today and a recruiter will respond to your application within 24 hours!** ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

We are seeking a passionate, dedicated Quality Control Technician to ensure our products exceed industry standards and client expectations. With a focus on quality, sustainability, and innovation, we serve a diverse range of clients across commercial, residential, and infrastructure projects. As a Quality Control Technician, you will play a crucial role in maintaining the quality and integrity of our concrete products. You will be responsible for conducting tests, analyzing data, and developing solutions to improve product quality. This position requires a keen eye for detail, a strong understanding of concrete technology, and the ability to work collaboratively with intersecting departments at SRM such as operations, production, sales, and technical services. Key Responsibilities: Conduct routine and non-routine analyses of raw materials, in-process, and finished concrete products using industry-standard methods. Interpret test results, compare them to established specifications and control limits, and make recommendations on the appropriateness of data for release. Perform visual inspections of finished products to ensure compliance with quality standards and specifications. Collaborate with production teams to identify and troubleshoot production challenges that affect quality. Assist in the development and implementation of quality control training programs for production staff. Maintain accurate and organized records of tests, analyses, and other quality-related activities. Stay updated with the latest trends, technologies, and regulations in the concrete industry to recommend improvements to our quality control processes. Qualifications Able to meet schedule requirements. Shifts vary based on scheduled pours. Candidates must be able to accommodate day shifts, as well as overnight shifts. ACI certification preferred Associate or bachelor's degree in Civil Engineering, Materials Science, Concrete Management, Construction Management, or related field is preferred. 1-3 years of experience in quality control or quality assurance, preferably in the concrete or construction materials industry. Strong understanding of concrete technology and testing methods. Excellent analytical skills and attention to detail. Effective communication and interpersonal skills. Ability to work independently and in a team environment. Proficiency in Microsoft Office and experience with quality management software. Willingness to undergo SRM's pre-employment screenings. About us: SRM strives to be the largest, most profitable construction material company in the country, while maintaining a best-in-class culture. SRM's 5 Principles of Service: Safety, Quality, Kindness, Cleanliness, Go-Getter Why Join Us? Our commitment to our team includes: Growth: Opportunities for advancement in a rapidly growing company. Home Daily: Enjoy work-life balance with daily home time. Competitive Compensation: Hourly pay with eligibility for bonuses and annual raises. Exceptional Benefits: Comprehensive benefits package including low-cost medical, dental, vision, STD, LTD, and life insurance, paid holidays, PTO and vacation programs, 401k with $100 match/week, family days, and more! Overtime Opportunities: Daily overtime after 8 hours and weekly after 40 hours Candidates will be required to undergo a pre-employment drug screen, SRM's pre-employment physical, and consent to background checks, including Clearinghouse and MVR checks. We are an equal-opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Join our dynamic Quality Assurance team at our Organic Dairy Processing facility in Platteville, CO. Be a part of a 2025 Top Workplace USA! Purpose: The Quality Assurance Lab Technician is responsible for in-process and finished product quality testing, maintaining accurate and complete records, and alerting management to any potential quality issues. Shift Days 6am - 6pm Essential Responsibilities: All plant personnel have the responsibility to monitor and report any deviations from our Food Safety and Food Quality (HACCP & SQF) programs to your immediate supervisor. Assist in all in-bound and finished product milk processing including but not limited to: Customer Service, working with our Laboratory and Product Information Management System, Tanker/Silo Inventory Control, administrative assistant duties. Competency in Microsoft Windows and Office products. Responsible for performing process control testing in a manufacturing environment. Maintain accurate and complete laboratory testing result records. Maintain Good Manufacturing Practices, Good Laboratory Practices and Safety Procedures. Communicate any potential quality issues to QA Management. Professional communication and customer service skills in working with multiple departments and external partners. Other Required Responsibilities: Laboratory testing result data entry. Member of HACCP team. Other quality department responsibilities as deemed necessary. Knowledge & Experience: High School Diploma or equivalent. Bachelor's degree in Dairy Manufacturing, Food Science, Microbiology, or related field preferred. Experience in dairy laboratory testing procedures preferred. Knowledge of laboratory testing methods. Detail oriented and team member. Strong, honest work ethic with ability to handle multiple tasks daily. Good communication skills. Physical Requirements: Must be able to sit for extended periods of time; Must be able to stand or walk for more than 50% of the shift. Must be able to bend, stoop, kneel or crawl; reach grasp and lift, push, pull up to 50 lbs. regularly and up to 80 lbs. occasionally. Day Shift 6am - 6pm

Sierra Space Careers: At Sierra Space, we build the missions and systems that keep our world secure in the domain above Earth. Sierra Space team members share a spirit of innovation and collaboration and a belief that we can deliver on the boldest missions in space today. Together with our customers, we aim to safeguard our nation, sustain human presence in space, and secure the freedom of operations in low Earth orbit and beyond. Our success is measured by the trust of those who rely on what we build and deliver, and our technologies keep the United States and its allies mission-ready throughout space. We are mission-driven, and together, we are an extraordinary team. About the RoleThe Technical Quality Assurance Inspector II(2nd shift) is responsible for performing detailed inspections of manufacturing goods during the manufacturing process. This role involves conducting visual, dimensional and electrical inspections of individual items, sub-assemblies or final system assemblies. The inspector will interpret prints, manufacturing drawings, diagrams, wire cards, and lists to approve or reject in-process or final assemblies, ensuring compliance with industry standards and certifications. A significant portion of the work may be performed under supervision or review of inspection results. In this role, you will perform detailed inspections of manufacturing goods during the manufacturing process, conducting dimensional and visual inspections of individual items, sub-assemblies, or final system assemblies. You will interpret prints, manufacturing drawings, diagrams, wire cards, and lists to approve or reject in-process or final assemblies while ensuring compliance with quality standards, specifications, and industry certifications. Additionally, you will document inspection results, maintain accurate records, and communicate inspection findings to relevant stakeholders. You will utilize Microsoft Office suite tools for documentation and reporting and begin to develop an understanding of industry standards and certifications, including NASA and IPC.About You Our mission is driven by an unyielding commitment to advancing space-based technology in service of our customers and safeguarding national security. We seek individuals who are passionate about innovating beyond boundaries and relentlessly pursuing solutions that protect, preserve and empower - to join us in this critical mission. We're looking for team members who align with our values, mission and goals - while also meeting the minimum qualifications below. The preferred qualifications are a bonus, not a requirement. Minimum Qualifications: Typically 1+ years of relevant experience. Developing the understanding to interpret technical schematics and documents. Basic understanding of electrical wiring concepts and specifications. Basic use and knowledge of Microsoft Office suite tools, particularly PowerPoint and Excel. Ability to understand and interpret geometric dimensioning and tolerance. Experience following and providing input to work instructions and SOPs. Willing and able to work 2nd shift. Preferred Qualifications: Associate's or Bachelor's degree in a related technical field. Advanced certifications in quality assurance or inspection (e.g., ASQ Certified Quality Inspector). Proficiency with use of basic inspection hand tools and equipment. Knowledge of statistical process control (SPC) and quality data analysis. Familiarity with non-destructive testing (NDT) methods. Experience with quality management software and databases (NC, CAPA, Calibration). Knowledge of electrical testing equipment and techniques. Experience in a regulated industry, such as aerospace or defense. Compensation: Pay Range: $23.03 - $31.68 Your actual base compensation will be determined on a case-by-case basis and may vary based on job-related knowledge and skills, education, experience, internal equity and market competitiveness. Elevate Your Career At Sierra Space, we are committed to your personal and professional development. We empower you to make profound and meaningful contributions and foster a vibrant culture of collaboration, where teamwork ignites breakthrough innovations. We also offer a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, and more. Sierra Space is an industry-leading space and defense technology company providing satellites, spacecraft, and enabling mission systems and components. We deliver mission-proven technologies to our customers that safeguard our nation, protect space-based assets and enable space exploration. Application Deadline: This role will remain posted until a qualified pool of candidates is identified. Please note: Sierra Space does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to Sierra Space team members not through our approved vendor list or Talent Acquisition will be considered property of Sierra Space, and we will not be obligated to pay any referral fees. Sierra Space Corporation is an equal opportunity employer and is committed to working with and providing reasonable accommodations to applicants with disabilities. If you need special assistance or a reasonable accommodation related to applying for employment with Sierra Space or at any stage of the recruitment process, please contact us.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Quality Inspector - 2nd Shift Reports to: Quality Manager Department: Quality Wage Range: $19.00 to $24.00 Are you a forward-thinking leader passionate about optimizing supply chain operations? PTA Plastics, an employee-owned and innovative leader in the plastic injection molding, contract manufacturing and tool-building industry, is looking for a Quality Inspector to join our dynamic team. At PTA Plastics, we're more than just a manufacturer; we partner with Fortune 500 OEMs in the medical device, defense, homeland security, and technology sectors, constantly pushing the boundaries of product development and manufacturing excellence. As an employee-owned company, every team member has a stake in our success, creating a collaborative and entrepreneurial environment where innovation thrives. Job Summary: The 2nd Shift Quality Inspector is responsible for ensuring that all plastic products meet the company's quality standards and specifications. This role involves inspecting products at various stages of the manufacturing process, performing tests, and identifying any defects or issues that could affect product performance and safety. The Quality Inspector will work closely with production teams to ensure continuous improvement and compliance with quality regulations. Key Responsibilities: Conduct visual and dimensional inspections of plastic products to ensure they meet quality specifications. Perform tests to check for material strength, durability, and other physical properties. Use measuring tools such as calipers, micrometers, gauges, and other inspection equipment to assess product dimensions and tolerances. Record and maintain detailed inspection reports, including measurements, test results, and any identified defects. Prepare and update quality control checklists and procedures. Maintain accurate and organized records of all inspections and tests performed. Monitor the production process to ensure adherence to quality standards. Identify non-conforming products and initiate corrective actions. Work with production and engineering teams to resolve quality issues and implement process improvements. Ensure compliance with industry standards, safety regulations, and company policies. Collaborate with production teams to provide feedback on quality issues. Participate in meetings to discuss quality control results and improvement strategies. Assist in training production staff on quality standards and inspection procedures. Suggest and implement improvements to inspection processes to enhance product quality and efficiency. Stay up to date with industry developments, new inspection techniques, and technological advancements. What We're Looking For: High school diploma or equivalent; associate degree or certification in quality control, engineering, or a related field is preferred. Proven experience as a quality inspector in a plastics manufacturing environment. Familiarity with quality control standards (e.g., ISO 9001). Strong knowledge of inspection equipment and measuring tools. Ability to read and interpret technical drawings, blueprints, and specifications. Excellent attention to detail and problem-solving skills. Good communication skills and the ability to work well in a team. Ability to work in a fast-paced environment and handle multiple tasks. Physical Requirements: Ability to stand for long periods and perform repetitive tasks. Comfortable working in various environmental conditions, including noise, heat, cold, and exposure to chemicals. Ability to work in a fast-paced environment and adapt to changing priorities. Comfortable wearing personal protective equipment (PPE) such as safety glasses, gloves, and ear protection when on the manufacturing floor. Ability to work in temperature-controlled environments and withstand exposure to noise levels associated with manufacturing machinery. Ability to receive, comprehend and utilize required training from OSHA and Company including but not limited to the following: Hazard Communication, Lock Out/Tag Out, First Aid and CPR (optional) AAP Statement: PTA Plastics is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice*

Job Description Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

Addressing the climate crisis is an urgent global priority, and at GE Vernova, we take our responsibility seriously. That is the singular mission of GE Vernova: to continue electrifying the world while simultaneously working to help decarbonize it. Job Description As a student of the Gas Power Controls Product Management organization, you will be an active contributor to: * Development of marketing collateral for new advanced software products being introduced to the fleet * Development and execution of online demand generation campaigns across web, email, and social platforms What you'll do (Job Responsibilities) * Collaborate with Product, Sales and Marketing teams to develop marketing collateral (brochures, presentations, etc.) * Support development and roll out of marketing campaigns for advanced controls software products & solutions * Research competitive landscape and assist with creating commercial pricing models, estimate product deployment costs * Assist in gathering and analyzing customer feedback from early MVPs/pilot projects What you'll bring (Basic Qualifications) * Currently enrolled and pursuing a graduate or undergraduate degree in an accredited Engineering, Computer Science, Business or Marketing program. * Minimum of 3.0 cumulative GPA (without rounding) What will make you stand out (Desired Qualifications) * Strong written and verbal communication skills * Familiarity with published AI platforms (e.g. OpenAI, Anthropic, etc.) * Ability to translate technical concepts into clear, customer-facing messaging * You have experience with industrial control systems and/or industrial software applications * You have a collaborative mindset and a willingness to learn * You are someone who brings strong Interest in sales enablement, account management, or product management. * You have strong analytical skills and an attention to detail Benefits Available to you: Addressing the climate crisis is an urgent global priority, and at GE Vernova, we take our responsibility seriously. That is the singular mission of GE Vernova: to continue electrifying the world while simultaneously working to help decarbonize it. In order to meet this mission, we provide varied, competitive benefits to help support our workforce: Our Culture | GE Vernova (gecareers.com) The pay for this position ranges from $23-34/hr. based on years of undergraduate/graduate field of study completed. This position is also eligible for: * Relocation Assistance: Co-op/Interns will be reimbursed for reasonable, proper, and documented expenditures incurred while initially reporting to work and returning to school/home upon completion of the assignment. Employees with a permanent address greater than 50 miles away from the work location are eligible. * Housing Allowance: Co-op/Interns employees receive a weekly housing allowance to help off-set living expenses when the co-op/Intern's permanent residence is at least 50 miles away from the work location. * Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services * GE Retirement Savings Plan (RSP) after their accumulated service reaches 90 days, and they meet any other eligibility requirements as defined in the plans. (Eligibility occurs on the 1st of the month following the 90th day.) Inclusion At GE Vernova, we believe in the value of your unique identity, background and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more: Our Culture | GE Vernova About GE Gas Power GE Gas Power engineers cleaner, more accessible energy that people depend on, powering growth and prosperity for people everywhere. Our leading technologies produce a third of the world's electricity thanks to our talented people, who make gas work for our customers, stakeholders and the world. Through relentless innovation and continuous partnership with our customers, we are building the energy technologies of the future and providing the cleaner, more efficient power people depend on today. This posting will be open until at least January 30, 2026. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No Application Deadline: March 31, 2026 For candidates applying to a U.S. based position only: This posting is expected to remain open for at least seven days after it was posted on December 15, 2025. U.S. Internship roles are ineligible for GE Vernova benefits.

Job Description GENERAL DESCRIPTION The Quality Control Technician I is responsible for inspecting and testing our products to ensure conformance with PCI standards and design specifications that are detailed on the pour sheet. This position is critical to ensuring the quality and safety of our products. Salary range $24.50/ hr - $27.00/ hr. Based on experience. WHY WORK FOR US? At Wells, we empower our team members to deliver an exceptional client experience. Our employees are talented problem solvers that shine in preconstruction, engineering, operations, and project management. They bring innovative solutions that yield outstanding results. In the design and construction industry, we focus on honesty and hard work to build trust that lasts beyond individual projects. Our team is consistently working to improve building processes and raise industry standards. We meet our partners' needs through collaborative efforts that ensure safe and certain results, reducing risks along the way. Together, we help businesses and individuals succeed and change our communities for the better. WHAT WE HAVE TO OFFER Wells values our employees and is committed to providing a competitive and comprehensive benefits package. Please note that the benefits listed here are for non-union employees. Benefits for union employees are covered under separate collective bargaining agreements which can be obtained through their union business agent or their HR representative. Health, dental and vision insurance Paid premiums for short- and long-term disability, and life insurance Wellness Incentives Paid holidays Flex spending for medical and daycare Health savings account (HSA) 401(k) plan with profit sharing Access to Nice Healthcare Employee Assistance Program Paid Time Off (PTO) Wishbone Pet Insurance Critical Illness Benefit Plan Accident Insurance Plan Voluntary Hospital Indemnity Plan Other benefits include Health and Family Care leave for both union and non-union employees. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Performs pre-pour inspections including dimensions of member, position of reinforcement, location of tensioning strand, and quality of forming. Post-pour inspection of cast product Perform wet and hardened required testing on the materials used in the manufacturing of product. Prepares concrete specimens for testing. Regularly performs test for slump, temperature, unit weight, air content, and cylinder strength. Involved with tensioning of cable to record elongations and ensure cable is tensioned as designed. Perform cylinder strength tests to ensure they meet intended strength. Conduct aggregate gradations and sieve analysis. Compliance with safety policy and procedures. Maintains complete Quality Control documentation for inspections and testing performed. Identify and record quality issues and works with Production to resolve those issues. Acts in professional manner that demonstrates the individual has good character and can be trusted by all employees. Complete special projects as requested and performs other duties as assigned. Willingness to work outside all year long (Location Specific) EDUCATION, SKILLS, AND ABILITIES REQUIRED High School Diploma or GED. Must have interpersonal communication skills to interact with co-workers, supervisors, and managers. Experience with Microsoft Office. Must be able to solve problems quickly and efficiently. General math skills, be able to read a tape measure. Strong attention to detail and organizational skills. Knowledge of safety procedures that need to be followed. Ability to work with others to get the project completed efficiently. Must be motivated and self driven to complete a task. Understand and accepts changes that are implemented to become best in Class. PHYSICAL REQUIREMENTS/ ADA ESSENTIAL FUNCTIONS Physically able to lift up to 75 lbs, occasionally. Physically able to push, pull, lift, bend, climb, kneel, twist, squat, crawl and use hands/forearms repetitively and frequently. Ability to move around for up to 12 hours per day. Ability to work from ladders, scaffolding, swing stages and man lifts at various heights frequently. WORKING CONDITIONS Moderate to high risk of exposure to unusual elements. Moderate to high risk of safety precautions. Moderate to high exposure to production environment. Wet, hot, humid, and wintry conditions (weather related) (plant specific) Ability to work outside year-round (plant specific) This position profile identifies the key responsibilities and expectations for performance. It cannot encompass all specific job tasks that an employee may be required to perform. Employees are required to follow any other job-related instructions and perform job-related duties as may be reasonably assigned by his/her supervisor. “ Equal Opportunity Employer, including Veterans and Individuals with Disabilities . ” Wells participates in E-Verify and will provide the federal government with your I-9 Form information to confirm you are authorized to work in the U.S. #INDLABOR

The Quality Technician II is responsible for maintaining the Quality Management System by following the required procedures and ensuring customer requirements are identified and met. Essential Duties & Responsibilities Reads part drawings and assesses dimensions. Supports inspection equipment operation within the production cell as required, including Coordinate Measurement Machine. Initiates Management Review Board and performs actions as assigned. Performs Final Inspection - Ensures required documentation from all inspections are complete and all functions of the manufacturing process have been verified as complete. Ensures correct product identification and traceability of materials is maintained throughout the operations process. Initiates Quality-related turnbacks and communicates with production. Creates basic and intermediate certifications as required by the Work Order, including FAIRs. Performs specialised inspection, including visual and dimensional checks. Assists with Internal Auditing as required. Assists with measurement tool calibration as required. Creates basic CMM programs in the production cell to aid in inspection. Participates in small projects or other tasks as required. Education and Experience This position requires a High School Diploma or GED equivalent. This position should have 2-3 years of experience in a quality role in a manufacturing environment. Experience with QMS compliance software (e.g., Qualtrax) and enterprise resource planning system (e.g., JD Edwards or SAP) is required. Knowledge, Skills, and Abilities Must have the ability to multitask in a fast-paced environment. Excellent interpersonal skills and ability to effectively communicate with all levels of the organization both written and verbal in English. Ability to work in a team environment. Must have a high level of attention to detail and excellent problem-solving skills. Must be proficient with Microsoft Office, specifically Excel and Outlook, and general computer skills. High knowledge of materials and material requirements as they relate to customer orders. High knowledge of purchase order requirements. Ability to read blueprints and product drawings and interpret requirements as needed. Must be able to operate various inspection tools such as dial calipers, micrometers, optical comparator, height gages, pin & plug gages, pi tape and microscopes. Must have excellent math aptitude. Work Environment/Physical Demands/Equipment Used This position is located in a manufacturing facility which requires prolonged sitting, standing, walking, squatting, twisting, and bending. This position will spend about 90% of their time on the production floor where heavy machinery is present and loud sounds exist. Requires manual dexterity for typing and considerable time at a computer. Health and Safety - PPE Requirements Safety Glasses to be worn at all times when on the production floor Safety Shoes to be worn at all times when on the production floor Must wear appropriate PPE for all work activities performed; varies based work Hourly $23.00-25.00 Apply here!

JOB TITLE: Quality Control Technician DEPARTMENT: Quality Assurance DIRECT SUPERVISOR: Director of QA GENERAL JOB DESCRIPTION: Scheduled hours for this position can vary depending on the needs of the company at the time. Shifts will generally be scheduled for four 10 hour shifts, from 1:00 - 11:30 pm Tuesday and Wednesday, and 4:00 am - 1:30 pm Saturday and Sunday. MAJOR DUTIES AND RESPONSIBILITIES: Responsible for carrying out policies and procedures as implemented by EB including GMPs, food safety, and quality to always keep facility “audit ready” Report violations to Production Lead or Supervisor, if repeat violations occur report to QA & Production Managers. Responsible for verifying policy, procedure and standard compliance through monitoring and documentation This includes but is not limited to Net Weight, Metal Detection, QC Checks, Retention Sample Log, Hold Log, Label Verifications & Misc. Paperwork that may be needed. Responsible for implementing corrective actions for non-compliance to policy and procedure and standards variance. Pulls retention samples and stores them in appropriate places with appropriate information logged. Inspects equipment at the beginning of production day & throughout the day for cleanliness and safe use. Other projects as assigned. Reports any food safety or quality issues immediately to Management. MINOR DUTIES: Places out of spec items on hold as needed. Identifies quality and food safety issues. Performs GMP training to new hires & refresher training as needed. QUALIFICATIONS: Food manufacturing experience preferred Able to stand for 4 hours at a time Attention to detail Comfortable correcting peers Outlook, Word and Excel preferred Bilingual (English and Spanish) preferred but not required RESPONSIBLE FOR FOOD SAFETY: Yes Pay Rate: $21.00 - $23.50 DOE WORK SETTING: In-person ABILITY TO COMMUTE/RELOCATE: Thornton, CO 80023: Reliably commute or planning to relocate before starting work (Required) WORK LOCATION: ONE LOCATION Powered by JazzHR dQ7akHbphI

The Quality Technician II is responsible for maintaining the Quality Management System by following the required procedures and ensuring customer requirements are identified and met. Essential Duties & Responsibilities Reads part drawings and assesses dimensions. Supports inspection equipment operation within the production cell as required, including Coordinate Measurement Machine. Initiates Management Review Board and performs actions as assigned. Performs Final Inspection - Ensures required documentation from all inspections are complete and all functions of the manufacturing process have been verified as complete. Ensures correct product identification and traceability of materials is maintained throughout the operations process. Initiates Quality-related turnbacks and communicates with production. Creates basic and intermediate certifications as required by the Work Order, including FAIRs. Performs specialised inspection, including visual and dimensional checks. Assists with Internal Auditing as required. Assists with measurement tool calibration as required. Creates basic CMM programs in the production cell to aid in inspection. Participates in small projects or other tasks as required. Education and Experience This position requires a High School Diploma or GED equivalent. This position should have 2-3 years of experience in a quality role in a manufacturing environment. Experience with QMS compliance software (e.g., Qualtrax) and enterprise resource planning system (e.g., JD Edwards or SAP) is required. Knowledge, Skills, and Abilities Must have the ability to multitask in a fast-paced environment. Excellent interpersonal skills and ability to effectively communicate with all levels of the organization both written and verbal in English. Ability to work in a team environment. Must have a high level of attention to detail and excellent problem-solving skills. Must be proficient with Microsoft Office, specifically Excel and Outlook, and general computer skills. High knowledge of materials and material requirements as they relate to customer orders. High knowledge of purchase order requirements. Ability to read blueprints and product drawings and interpret requirements as needed. Must be able to operate various inspection tools such as dial calipers, micrometers, optical comparator, height gages, pin & plug gages, pi tape and microscopes. Must have excellent math aptitude. Work Environment/Physical Demands/Equipment Used This position is located in a manufacturing facility which requires prolonged sitting, standing, walking, squatting, twisting, and bending. This position will spend about 90% of their time on the production floor where heavy machinery is present and loud sounds exist. Requires manual dexterity for typing and considerable time at a computer. Health and Safety - PPE Requirements Safety Glasses to be worn at all times when on the production floor Safety Shoes to be worn at all times when on the production floor Must wear appropriate PPE for all work activities performed; varies based work

This is a swing shift: Monday - Thursday 3pm-1:30am, Overtime on Fridays as needed. Are you the kind of person who spots the tiny details others miss? Are you passionate about accuracy, product quality, and learning within a manufacturing or laboratory environment. We have the job for you. Our quality team is looking to add another person. This role is essential in achieving our goal of delivering products that work. The quality control tech is a person who likes to get things right, we don't sell good, better, best; we sell the best which means we need to produce the best. We have high standards for our products and need dedicated team members to uphold those standards. What you will do: • Perform routine visual, dimensional, and functional inspections on raw materials, in-process components, and finished goods. • Conduct basic laboratory tests following established protocols and safety procedures. • Record data accurately and maintain organized documentation in accordance with quality standards (e.g., GMP, ISO). • Identify and report non-conformances to supervisors or quality leads. • Support the quarantine, release, and tracking of materials. • Maintain cleanliness and calibration of testing equipment. • Collaborate with production and quality teams to resolve quality-related issues. • Assist in continuous improvement initiatives and process documentation updates. What's in it for you? Innovative Environment: Be part of a forward-thinking company that values creativity and continuous improvement. Career Growth: Opportunities for professional development and advancement. Team Collaboration: Work with a dynamic team that supports and challenges each other to achieve excellence. Competitive Compensation: Attractive salary and benefits package Qualifications We want to hear from you if you have: • Strong attention to detail and ability to follow written procedures. • Basic math and measurement skills. • Good communication and teamwork abilities. • Ability to stand for extended periods and lift up to 25-40 lbs as required. Bonus points if you have: • Prior experience in quality control, manufacturing, or lab work. • An associates degree in STEM • Familiarity with GMP, ISO 9001, or similar quality systems. • Experience with calipers, viscometers, or basic inspection tools.

Job Title: QAQC Technician (Electrical) - Data Center Department: Quality Reports To: Quality Manager / Project Manager Loenbro Mission Critical has strategically shifted its focus to specializing in data center and mission-critical electrical projects. This decision capitalizes on the growing demand for reliable and innovative electrical solutions in the digital age. By specializing in this niche, Loenbro aims to excel in providing cutting edge electrical infrastructure for data centers and mission-critical facilities, positioning itself as a trusted partner in a rapidly expanding industry. This shift offers opportunities for specialization, long-term partnerships, technical innovation, and diversification, while also presenting challenges such as competition and compliance. To succeed, Loenbro must invest in expertise, adapt to changing regulations, and stay at the forefront of technological advancements, ultimately solidifying its reputation for quality and reliability in this critical sector. As an Electrical QA/QC Technician at Loenbro Mission Critical, you will play a critical role in ensuring the highest quality and safety standards are met throughout our electrical projects. You will be responsible for conducting inspections, tests, and quality control measures to maintain our reputation for excellence. Key Responsibilities: Quality Assurance: Develop and maintain a robust quality assurance and quality control (QA/QC) program for electrical projects, including the review of project plans and specifications. Inspection: Conduct thorough inspections of electrical installations, equipment, and materials to verify compliance with industry standards, codes, and project requirements. Testing: Perform electrical testing, measurements, and functional checks to ensure the integrity, safety, and reliability of electrical systems. Documentation: Maintain detailed records of inspections, test results, and any non-conformance issues. Prepare and submit comprehensive reports to project managers and clients. Compliance: Ensure that all electrical work complies with local, state, and national electrical codes and regulations. Problem-Solving: Collaborate with project teams to identify and resolve quality-related issues in a timely manner. Training: Provide guidance and support to project personnel regarding quality and safety standards, fostering a culture of quality excellence. Qualifications: 1-3 years of previous experience in quality assurance/quality control roles within the electrical industry is highly desirable. Degree in Electrical Engineering, Quality Control, or a related field (Preferred). Strong knowledge of electrical codes, industry standards, and regulations. Exceptional attention to detail and strong analytical skills. Effective communication and documentation skills. Proficiency in the use of testing equipment and tools. Ability to work independently and as part of a collaborative team. Commitment to safety, quality, and continuous improvement. OSHA10 or higher and other safety certifications are highly preferred. Work Environment: This position may require travel to various project sites. Ability to work in a fast-paced environment and adapt to changing project requirements. Occasional evening and weekend work may be required to meet project deadlines. Potential Hazards: Outside most of the time Potential exposure to extreme cold and hot temperatures Manufacturing and refining environment Fit and move in confined spaces including tanks and vessels Limited working surfaces Exposure to noise above 85 decibels and intense odors Exposure to areas with limited visibility Climbing up and down stairs and ladders to both get in and out of trenches and up to elevated platforms (scaffolding at significant heights) Lifting necessary equipment and materials 1-50 pounds, 50% of the time on a monthly basis for required tasks Potential or Periodic amounts of time for the following: If driving is required, valid driver license and proof of insurability is required. All drivers are subject to a DMV background records search. Essential Requirements: Walking on uneven terrain, with an average of 2 miles per day Standing Sit, stoop, crawl, and kneel Use of respirator if position requires Driving if required to travel Benefits: Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage 401(k) Retirement: The Company provides a 100% match of the first 4% of employee's contribution each year, to the plan. Eligibility for the plan begins the first day of the month following 90 days of employment. We are “Leading the Change” in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION. WE DO WHAT WE SAY. WE LEAD BY EXAMPLE. WE DO THE RIGHT THING. WE PRACTICE STEWARDSHIP. Loenbro is an Equal Opportunity Employer.

A Day in Your Life at MKS: Hiring Manager to create summary of job using template below As an Inspector 2 at MKS, you will partner with other inspectors to ensure product conformance to prints and specifications. In this role, you will report to the Sr. Quality Manager. You Will Make an Impact By: • Learning the mechanical inspection techniques and product requirements for MKS Broomfield products. •Working from written procedures, drawings, sketches and specifications • Inspecting products mechanically to prints and specifications to ensure conformance. Determines or assists in determining methods, sequences and procedures necessary for inspection • Interacting with the PLM system to access documentation and interacting with the ERP system to perform transactions. • Performing mechanical and visual inspection in both a lab and cleanroom environment. Skills You Bring: • Completion of high school, vocational training or equivalent is preferred • Willingness to learn mechanical inspection in a fast-paced environment. • Aptitude with numbers and basic math and geometry. • Able to absorb and interpret visual information. • Proficient in using a computer. • 1+ years of experience in a similar role Physical Demands and Working Conditions: Perform activities such as sitting, standing, or typing for extended periods of time • Regularly requires good manual dexterity and coordination • Occasionally moves/positions objects up to 30 lbs • Ability to remain in a stationary position for 20% of the time • Regularly requires manual dexterity and coordination of objects below, at and above shoulder level • Must be able to exchange accurate information • Operates in a laboratory environment • Ability to observe documents and details at close range (within a few feet of the observer) • Constantly operates a computer, inspection tools and other office productivity machinery • Dedication to safety to mitigate hazards, including handling mechanical and electrical hardware, high voltage, gas, water, and heat • Noise level in the work environment is usually average Hourly Pay Range: $17.31-32.12 per hour. This range is a good faith estimate of the expected salary range for this position, based on a wide range of factors including qualifications, experience and training, operational and business needs and other considerations permitted by law. At MKS, it is not typical for an individual to be hired at or near the top of the range for the role. #LI-AS1 Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants for these positions may need to be “U.S. persons.” “U.S. persons” are generally defined as U.S. citizens, noncitizen nationals, lawful permanent residents (or, green card holders), individuals granted asylum, and individuals admitted as refugees. MKS Inc. and its affiliates and subsidiaries (“MKS”) is an affirmative action and equal opportunity employer: diverse candidates are encouraged to apply. We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. Hiring decisions are based on merit, qualifications and business needs. We conduct background checks and drug screens, in accordance with applicable law and company policies. MKS is generally only hiring candidates who reside in states where we are registered to do business. MKS is committed to working with and providing reasonable accommodations to qualified individuals with disabilities. If you need a reasonable accommodation during the application or interview process due to a disability, please contact us at: accommodationsat *************** . If applying for a specific job, please include the requisition number (ex: RXXXX), the title and location of the role Globally, our policy is to recruit individuals from wide and diverse backgrounds. However, certain positions require access to controlled goods and technologies subject to the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants for these positions may need to be “U.S. persons.” “U.S. persons” are generally defined as U.S. citizens, noncitizen nationals, lawful permanent residents (or, green card holders), individuals granted asylum, and individuals admitted as refugees. MKS Inc. and its affiliates and subsidiaries (“MKS”) is an affirmative action and equal opportunity employer: diverse candidates are encouraged to apply. We win as a team and are committed to recruiting and hiring qualified applicants regardless of race, color, national origin, sex (including pregnancy and pregnancy-related conditions), religion, age, ancestry, physical or mental disability or handicap, marital status, membership in the uniformed services, veteran status, sexual orientation, gender identity or expression, genetic information, or any other category protected by applicable law. Hiring decisions are based on merit, qualifications and business needs. We conduct background checks and drug screens, in accordance with applicable law and company policies. MKS is generally only hiring candidates who reside in states where we are registered to do business. MKS is committed to working with and providing reasonable accommodations to qualified individuals with disabilities. If you need a reasonable accommodation during the application or interview process due to a disability, please contact us at: accommodationsat *************** . If applying for a specific job, please include the requisition number (ex: RXXXX), the title and location of the role

Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)