Quality inspector jobs in Franklin, TN - 58 jobs

Position Title: CCTV Operator - CCTV Video pipe Inspection Our Core Values: Guided by Safety. Focused on Communities. Powered by Care. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The CCTV Operator is responsible for the successful completion of CCTV processes. The incumbent operates CCTV, and other machines used in inspections. Roles and Responsibilities: Load and prepare equipment for upcoming jobs. Set up and operate sewer cleaning equipment. This includes lifting, carrying and pulling hoses, climbing on to the unit for set up and minor maintenance, standing, kneeling or bending for long periods of time Set up and operate various handheld and hand operated equipment including power tools, shovels etc. Majority of duties take place outside with exposure to all types of weather conditions and terrain on a year-round basis. Operates mobile television and chemical sealing units to conduct internal sewer line inspections and to seal defects, thereby preventing water infiltration. Places traffic cones and other barricades at job sites; removes manhole covers and examines manhole to determine proper set-up procedure. Locates line sections to be inspected, using map, and determines set up procedures; sets up winches, determines skid size and installs proper skid; plugs line, if necessary; threads cable through sewer lines and places camera inside manhole to televise sewer line; Operates and adjusts camera controls to obtain optimum clarity and contrast. Prepares description of each sewer defect, and records pertinent data. Determines supplies necessary for the daily operation of the T.V. truck and equipment; assists with mixing chemicals. Prepares packer, connects necessary cables to packer operates sealing unit to release sealing compound. Removes camera, hoses and packing from line when inspection or sealing operations completed. Cleans and stores camera, chemicals, and equipment on van truck after use. Success Factors: Load and prepare equipment for upcoming jobs. Set up and operate sewer cleaning equipment. This includes lifting, carrying and pulling hoses, climbing on to the unit for set up and minor maintenance, standing, kneeling or bending for long periods of time. Set up and operate various hand held and hand operated equipment including power tools, shovels etc. Majority of duties take place outside with exposure to all types of weather conditions and terrain on a year-round basis. Operates mobile television and chemical sealing units to conduct internal sewer line inspections and to seal defects, thereby preventing water infiltration. Places traffic cones and other barricades at job sites; removes manhole covers and examines manhole to determine proper set-up procedure. Locates line sections to be inspected, using map, and determines set up procedures; sets up winches, determines skid size and installs proper skid; plugs line, if necessary; threads cable through sewer lines and places camera inside manhole to televise sewer line; Operates and adjusts camera controls to obtain optimum clarity and contrast. Prepares description of each sewer defect, and records pertinent data. Determines supplies necessary for the daily operation of the T.V. truck and equipment; assists with mixing chemicals. Prepares packer, connects necessary cables to packer operates sealing unit to release sealing compound. Removes camera, hoses and packing from line when inspection or sealing operations completed. Cleans and stores camera, chemicals, and equipment on van truck after use. Experience and Education: High school diploma or equivalent desired Minimum of 1 year of related experience or training Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver's License is required within two weeks of employment. Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

The QC Lab Tech is responsible for performing quality testing on raw materials, in-process batches, finished product, and/or customer samples in a timely manner. The QC Lab Tech is essential in ensuring testing meets specified requirements and for keeping laboratory testing up to date. Prepare and/or test samples of finished products and/or raw materials following approved work instruction or experimental test parameters. Identify problems, issues, and concerns. Notify appropriate personnel and provide suggestions and countermeasures to your direct supervisor. Act as first line problem solver for non-standard results. This includes gathering information from the production floor, lab or other areas; the communication to supervisor and/or quality engineers; carrying out any actions to clarify the situation to aid in the determination of the optimal path forward. Ensure equipment and/or instruments are clean and in good working order before and after use. Recognize instrumentation that requires calibration and is in calibration prior to use. Support instrument validation/calibration activities and maintain instrumentation libraries as assigned. Clearly documents test results in Sunstar Engineering Americas LIMS portal and/or MS365 applications. Using LMS data to create COA documentation for customer. Labeling finished good containers as part of QC completion process. Support validation of APQP/Development Projects pertaining to new materials, test methodologies and/or instrumentation. Identify problems, issues and concerns and effectively communicates in a timely manner to direct supervisor Create product and sample labels per work instructions to ensure proper material identification and hazardous communication (HAZCOM) Identifies opportunities continuous improvements. Participates/leads Continuous Improvement projects as assigned. Other duties as required to operate a successful, organized Quality Laboratory. Maintains a clean and organized work environment according to the standards to promote good chemical hygiene, avoid cross-contamination, ensure ready-to-use workplaces, eliminate generation of excess waste and prevent to creation of safety hazards. · This position is also required to perform other related duties as assigned by the Lab Supervisor or Contract Tolling Manger Requirements Associated Degree in Chemistry, Engineering, or related field with two years of lab experience or equivalent combination of education and experience. Demonstrated technical aptitude with great math and reading skills, proven written and verbal communication. Ability to learn operation of complicated laboratory equipment Highly detail oriented with a critical degree of accuracy regarding visual and physical inspection of product. Ability to concentrate and remain alert while working on highly repetitive tasks. Self-starter and able to work independently with little supervision and ability to operate efficiently on a team. Proficient with Microsoft software Products. The position requires an individual to stand for extended periods of time, frequently lift up to 50 pounds and push/pull carts up to 1,200 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. Safety requirements for this position are safety glasses and steel-toed work boots. Must comply with all Federal, State, and Local, safety and environmental regulations, along with the Company's quality, safety, and environmental policies. The above statements are intended to describe the general nature and level of work being performed. Such information is not intended to be an exhaustive list of all responsibilities, duties, and skill required to perform this job. Sunstar Engineering is an EEO employer.

Temp Immediate opening for a Quality Inspectors in the Vance, AL area. All candidates must be able to pass a pre-employment drug screen and criminal background check. * Automotive Manufacturing and/or Quality Control Experience a plus * Familiar with containment - inspection, sort and rework of components * Long term contract assignment * Fluent in spoken and written English * High school diploma or GED preferred * Must be 19 years of age or older * Must be a team player, take directions and have a sense of urgency * Mature, professional attitude, reliable transportation and professional appearance required 701 Beechcroft Rd, Spring Hill, TN 37174, United States of America

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Performs visual, mechanical, functional, dimensional or electrical inspection of a variety of raw materials and products in the production assembly process through to final system assembly. Performs inspection tasks involving the use of a wide variety of test instruments and equipment to measure values and record functional operation of components, equipment, systems, supplies and materials. Determines acceptability and identifies and recommends disposition of defective items in accordance with established procedures. **Key functions of Job for Quality Inspector:** + Works under close supervision and direction of the inspection supervisor or his/her delegate to ensure acceptance on complex mechanical and microelectronic assemblies and associated paperwork. + Inspector will be performing inspection with microscope on small delicate microelectronic components, semiconductor packages and working in a clean room production environment. + Visually inspects electronic assemblies for proper method of assembly, component types, component orientation, mechanical and electrical connections, soldering workmanship, foreign material, finish and appearance, marking and other characteristics that could affect the quality and/or reliability of the product. + Inputting defect data into database and performing first article inspection on assemblies. + Assists in-process monitoring of material handling, shipping, and packaging of product. + Inspects material identifying paperwork for accuracy and proper handling as per defined procedures. + Occasionally assists in carrying out investigations to solve problems encountered in the course of inspection of product and documentation. + Interact and communicate with customer inspector during source inspection visit. + Candidate must be able to obtain a security clearance. **Skills and Specifications:** + Good oral and written skills + Ability to work in a team environment + Attention to detail & manual dexterity + Ability to read and understand blueprints and schematics + Proficient in Microsoft Office + Ability to learn other software as required **Education and Qualifications:** + High school diploma required + Certification to IPC-A-610 preferred + Familiarization with Inspection Criteria I.A.W. MIL-STD-883; Test Methods 2017 preferred **Work Environment:** Combination of manufacturing and office environment. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Simpson Strong-Tie is a leader in engineered structural connectors, software, and solutions for the building industry. We maintain a reputation as a trusted manufacturer, partner, and corporate citizen committed to our customers and employees. Our founder, Barc Simpson established 9 Principles of Business we live out as company values and have made Simpson Strong-Tie an inspiring place to work since 1956. Our team of talented people are dedicated to our shared mission: to provide solutions that help people design and build safer, stronger structures. Learn about our company culture directly from our team. YOU As an Associate Quality Lab Technician, you will be responsible for incoming material inspections and testing as well as materials produced in-house. This position will challenge you to work as a team to set, achieve, and maintain goals including daily inspection times. You will have the opportunity to work with a dedicated and knowledgeable group of people who support and lead quality improvement efforts to ensure that our products have No Equal in our industry. This position will follow a Monday through Thursday schedule from 5:00 AM to 3:30 PM, with overtime as needed. WHAT YOU'LL BE DOING (% of Time) Inspect incoming materials and parts to ensure vendor quality. Report inspection findings using software programs. Create, revise, or update various spreadsheets and/or electronic records, etc. used to collect information in the lab. (60%) Assure the reliability and consistency of production by checking processes, first piece and final output. Communicate and assist Engineers in resolving non-conformances. (25%) Contribute and participate in various improvement projects within the plant. (10%) Report non-conformances using TQC system and follow through to execution of disposition. (5%) DESIRED SKILLS AND EXPERIENCE If you can do everything listed above, you've got what it takes. Perhaps some of the following would be helpful too: 3 years of experience performing product inspections is required. Ability to work in a Microsoft software environment including Excel, Outlook, PowerPoint, and Word. Ability to have attention to detail and ensure accuracy of information. Ability to identify options for solving a problem. Ability to meet productivity standards, deadlines and work schedules. Ability to fulfill all commitments made to peers, co-workers, and supervisor. Ability to hold self and others accountable for measurable, high-quality, and timely results. Ability to work independently and efficiently. Ability to work well within a small team environment. Excellent verbal and written communication skills. Accountability & Dependability. Able to consistently demonstrate reliable, punctual attendance Mathematical Reasoning: Ability to add and subtract two-digit numbers and to multiple and divide with 10's and 100's. Ability to Work Independently: Follow both written and oral instructions, including safety guidelines, work instructions, and company policies. Attendance: Able to consistently demonstrate reliable, punctual attendance in accordance with our attendance policy. Safety is the top priority. You will be required to quickly recognize and respond to dangerous situations in a safe and efficient manner. You must lead by example by following all Health, Safety, and Environmental (HSE) rules and requirements and wearing the necessary personal protective equipment (PPE) at all times. This includes gloves, protective clothing, heat-resistant gear, and, when required, respirators to protect against burns, chemical exposure, and other potential hazards. Continuously build your skillset to influence decisions and recommend/implement process improvements in an effort to grow department throughput while meeting product quality. Communication Skills: Speak in the most effective way to relay information to all departments and at all levels within the organization. Listen and ask questions to ensure understanding. Quality Standards Knowledge: Demonstrate an understanding of company quality standards and company quality control processes. Problem Solving: Able to solve practical problems and deal with a variety of situations where only limited standardization exists Teamwork: Ability to work with other team members to accomplish group goals Results Focus & Initiative: Ability to multitask and take initiative in a challenging, fast-paced environment. Customer Service Skills: Apply customer service principles and processes on the job and with others Reading Comprehension: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to stand, walk, see, talk, and hear. The employee is occasionally required to sit. This role operates large equipment and needs to constantly position self to maintain the operation of equipment. While performing the duties of this job, the employee must possess the ability to lift, carry, push, and pull materials and objects weighing up to 50 pounds, and heavier weights with proper equipment. WORK ENVIRONMENT Regularly work around moving mechanical parts. The noise level is loud. The job may risk exposure to dust, heat and/or cold, wet or humid conditions. TRAVEL REQUIRED No travel is required. This position will require travel to an alternate facility for training prior to startup. WORK STATUS & LOCATION This full-time, non-exempt position is in Gallatin, TN. RELOCATION Relocation is not available for this position. Pay $19.38 - $29.09 / hour REWARDS AT SIMPSON STRONG-TIE We recognize and reward employees with a carefully designed and comprehensive rewards package, including competitive compensation, quarterly bonuses or commission and first-rate benefits. May exclude some positions, such as seasonal jobs. Quarterly Bonuses/Commission: You will be eligible for either a bonus or commission, paid on a quarterly basis. We believe all employees affect customers, sales and revenue - directly or indirectly - and should be rewarded by sharing the company profits. Benefits: We provide a wide range of benefits for eligible full-time employees including: medical, dental, vision, retirement contributions, employee stock purchase and bonus plans, pay for holidays, vacation, sick days, funerals and jury duty, years of service awards, employee discounts, employee referral bonuses, charitable contribution matching, education reimbursement and more. View benefit plan details here: ******************************** In keeping with our values and commitment to diversity, equity, and inclusion in our communities, we are an equal opportunity employer. This means that our employment decisions are based on your qualifications and merit, and our business needs. Please note all job offers are contingent upon a successful background investigation and drug test. Simpson Strong-Tie's drug policy is based upon Federal Law, and therefore will screen applicants for amphetamines, including methamphetamines, cocaine, phencyclidine and opiates. #NowHiring #GetHired #Hiring #HiringNow Company: Simpson Strong-Tie Company Inc.

Auditor is responsible for verifying all of our products - stampings, welding and assembly to the customer's specifications. He/she is also responsible for all quality inspection per the customer requirements and must maintain audits to ensure compliance to all regulations. Essential Duties and Responsibilities: Perform 1st pieces buy off Measure parts on gauges Perform audits at all layers of operation Perform gage R&R Support the production and quality departments in problem solving Responsible for quality assurance holding cage -Crib-, which has new parts, changed parts, and prototype parts Execute all job responsibilities, not specifically listed here, that may be determined necessary by the Quality Manager Demonstrates through personal action, a strong commitment to disciplined adherence to process and procedures Actively contributes to and participates in continuous improvement initiatives

Job Description Purpose and objectives of the function The purpose of the function is to oversee Quality Inspectors, spot check floor quality throughout the facility, and complete required reports. Identifying nonconforming material and notifying Supervisors/Managers. Assist Procurement with inspection of 1st run items from suppliers. Purpose and objectives of the position Ensure compliance with the engineering drawings to production. Work with QA Process Engineer for overall Quality. Responsibility Spot check production runs throughout the facility. Assist with incoming inspections of purchased material. Assist QA Process Engineer with Spanish process translations. Log audit findings Assist with ISO training as needed Make sure POKE-YOKE is in place where required Assist with calibration of tools Review nonconforming area weekly Verify 1st piece and periodic checks are being completed Inspection of 1st piece pre-pros from suppliers Pass or fail samples and notify Procurement of findings. Assist with local supplier checks Powered by ExactHire:191326

Doc Center 1st shift 9am-5:30pm Mon-Friday Some overtime required on Sat/Sun Qualifications Computer skills

Job DescriptionSalary: $24.70 Starts at $24.70 an hour // $700 sign-on bonus // paid time off // 401(k) // health benefits Be part of a team thats transforming work into something amazing. At Tennessee Cheesecake, were on a mission to create delicious dessertsand a better way to work. Were building a lean culture that values people, learning, and daily improvement. If youre passionate about food safety, leadership, and continuous improvement, we want you on our team. Position Summary The QA Tech is a proactive, improvement-driven champion that thrives in a hands-on environment. In this role, youll support and enhance our SQF and HACCP systems, while leading daily improvements rooted in Lean thinking. Youll foster a culture of ownership, continuous learning, and high standards across the production floor. What Youll Do As Quality Assurance Technician, youll work closely with Production, Sanitation, and Maintenance to meet the highest food safety standards. Your #1 duty will be making improvements to processes, maintaining quality and food safety. Your next most important duty will be coaching and training others on making improvements. Other Responsibilities: Ensuring compliance with HACCP, regulatory and customer-specific standards Facilitating root cause analysis and corrective actions Maintain compliance with FDA, SQF, HACCP, and GMP standards Supporting mock recalls, customer complaint resolution, and traceability exercises Training team members on standard work, quality procedures, and safety protocols What Were Looking For We are seeking a hands-on, solutions-oriented team member who embraces challenges as opportunities. The ideal candidate is both a coach and a lifelong learner, bringing the following qualities: A mindset of extreme ownership, follow-through and a commitment to continuous growth Knowledge of food safety systems (SQF, FSMA, GMPs, HACCP) Proven analytical, problem-solving, and conflict resolution abilities Strong communication, organization, and interpersonal skills Tech-savvy and adaptable to changing priorities Education & Experience Requirements Bachelors in Food Science, Microbiology, or related field preferred; Associates degree in a science related field with 2+ years of quality assurance experience in food manufacturing may be considered Must be proficient with computer-based tools Schedule Primarily 6 AM 4 PM, MondayFriday; flexibility weekends as needed Physical Requirements Comfortable working in a production environment Must follow food safety requirements, which includes not wearing jewelry (e.g., rings, watches, exposed dermal piercings), false eyelashes, fingernail polish, and artificial nails Physically able to stand, bend, lift (up to 30 lbs occasionally), reach, and perform full-body movements Compensation & Benefits $24.70 per hour to start $700 sign-on bonus after 90 days with excellent attendance Employee Profit Share Program 401(k) with company match Paid Time Off program Medical, Dental, Vision Insurance (full-time benefit after waiting period) Company-paid Life Insurance (full-time benefit after waiting period) Most major holidays off (Thanksgiving, Christmas, etc.) Our Culture & Values We believe work should be more than a paycheckit should be a place where great people do great work. Our core values guide everything we do: See the glass as half full Have heart (no jerks) Dedication to the team Customer first Be adaptable Have fun At Tennessee Cheesecake, every shift is a chance to make things cleaner, safer, and smarter. We challenge each other to learn, improve, and growtogether. Ready to grow with us? Apply today and be part of something sweet. Tennessee Cheesecake is an equal opportunity employer.

Contour Airlines is a long-established aviation services company with a diverse range of capabilities. At Contour Airlines, our core values guide every action and decision. We are unwavering in our commitment to integrity and safety, which remain at the heart of all our business lines. Our team members exemplify an attitude of excellence, consistently striving to think like a customer. We believe there is strength in unity, and we work together as a team to achieve ambitious goals. Full-Time Employee Benefits & Compensation Overview As a full-time employee of Contour Airlines, you are eligible for the following benefits and programs: Group Insurance Plans * Health, Vision, and Dental Coverage-Effective the first day of the month following your hire date. Additional voluntary benefits include short-term/long-term disability and life insurance policies. * Eligibility begins the first day of the month following your hire date. 401(k) Savings Plan * Eligibility begins the first day of the month following your hire date. * The Company offers a matching contribution up to 6% of your eligible compensation. * Enrollment guidelines and a 401(k) Enrollment Guide will be provided during onboarding. Paid Sick Leave * Accrual of up to 56 hours of paid sick leave per year. * Unused sick leave rolls over annually until your sick bank reaches 480 hours. Vested Vacation Hours * Eligible to receive vacation hours on January 1st following your hire date. * These hours will be vested and available for use in accordance with Company policies. Non-Revenue/Space Available (NRSA) Travel Privileges * NRSA (non-revenue/space available) travel privileges on Contour Airlines upon hire and access to MyID Travel after 6 months of service Leaves of Absence * Eligible for various types of leave, including: * Medical Leave * Non-Medical Family Care Leave * Maternity and Paternity Leave * Personal Leave * Detailed leave policies are outlined in the Contour Airlines Employee Handbook, which will be provided during onboarding. Compensation Details * Pay Rate: starting hourly rate is between $27.00 and $37.00 per hour based on your prior work experience. You will also receive an additional $1.00 override for working the nightshift. * Step Pay Increases: Eligible for a $1.00 increase each year on your pay anniversary date, up to a maximum rate of $42.00 per hour. * Retention Bonus: After reaching the top of the pay scale, eligible for an annual retention bonus of up to $2,000.00 based on performance. * Overtime Pay: Hours worked in excess of 40 per week will be paid at 1.5 times your hourly rate. * Holiday Pay: Work performed on Contour Airlines' observed holidays will be compensated at 2 times your hourly rate. A list of Company-recognized holidays is outlined in the Employee Handbook. Equal Employment Opportunity Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Accommodations Contour Airlines is committed to providing reasonable accommodations to applicants and employees. If you require accommodations during the application or onboarding process, please contact Human Resources at *****************. Join Our Growing Team Contour Airlines' rapid growth has created exciting career opportunities. We invite you to become part of our family and contribute to our ongoing success. Position Summary The Quality Control - Aircraft Inspector is responsible for ensuring all aircraft maintenance, inspections, repairs, and documentation are carried out in strict compliance with FAA regulations, manufacturer's specifications, customer requirements, and Company standards. This role is critical to maintaining the highest levels of airworthiness, safety, and operational reliability. Essential Duties & Responsibilities * Perform incoming, in-progress, and final inspections of aircraft, components, and articles maintained by the Company. * Monitor workmanship and materials to ensure compliance with FAA regulations, manufacturer guidelines, and Company procedures. * Verify that all required maintenance and inspection documentation is completed accurately and in compliance with regulations. * Oversee proper use of tools, equipment, and safety procedures, ensuring compliance with OSHA, EPA, and other regulatory requirements. * Confirm that all maintenance work meets FAA, customer, Company, and manufacturer standards of quality. * Complete inspection records in accordance with the Repair Station Manual / Quality Control Manual and applicable customer guidelines. * Conduct surveillance of maintenance practices, storage areas, shops, and housekeeping standards, initiating corrective actions as required. * Provide constructive feedback to improve efficiency, productivity, quality, and safety. * Assist Crew Chiefs and Supervisors in determining the scope of required repairs. * Perform weight and balance procedures. * Release aircraft or components back into service following approved inspections. * Participate in special projects or other duties as assigned by leadership.

Fluidra's looking for a Quality Technician to join our team in Portland, TN. WHAT YOU WILL CONTRIBUTE The Quality Technician position at FLUIDRA will be responsible (under limited supervision) for maintaining quality standards by reviewing, analyzing and disposition of incoming and in-process materials resulting from customer returned products (RMA Analysis) and/or internally rejected materials (MRB) from any area within the Supply Chain process (Receiving, manufacturing, warehouse / handling and inspection areas), recording any quality results and maintaining quality records per company policy. The QC Inspector shall be experienced in writing NCMR's (non-conforming material reports through Oracle preferably) and documenting Corrective Actions Reports for Quality Engineers as well as utilizing emails to communicate these rejections/CARs to buyers and Supplier's when needed. This person will interact with material handlers on a day-to-day basis as well as with Receiving, Production Planning/Scheduling and Inventory Control teams to assure accurate and efficient processing/movement of non-conforming materials both physically and in the ERP system which will include acceptance and disposition into the appropriate sub-inventory location of products mainly via the FLUIDRA MRB Meetings. At the same time, this person will ensure both the RMA and MRB areas are appropriately organized and cleaned including accuracy of product as per Oracle inventory requirements. This person will also support the Receiving Inspection area/process with material handling support to QC Inspectors when needed as well as visual inspections when materials require either sample or 100% inspections. Other duties or changes may apply depending on company/business needs. Additionally, you will: Responsible for routinely conducting departmental Quality and/or Safety Audits Perform inspections for compliance with specifications using blueprints, drawings, inspection procedures, and prior knowledge of fabrication methods to evaluate if deficiencies are present in systems, structures, assemblies, or parts. Conduct in-process and final inspections at various checkpoints during maintenance activities. This includes installations or repairs of removed, disassembled, repaired, and assembled equipment; installation of structures, systems, and associated components; equipment to eliminate work hold-ups and rework; and to ensure conformance to specified requirements. Interpret inspection acceptance/rejection criteria to identify discrepancies and non-conformances. Assemble pertinent information and materials necessary to effectively accomplish planning, scheduling, inspections, and reporting of inspection results. Interpretation and judgment of the acceptance/rejection of an item is based on a review of the work against the written requirements. Judgment and interpretation is based on training and experience. Conduct training of lower level and same level inspection personnel by demonstrating the proper techniques for performing Quality Control inspection, interpreting inspection results, documenting inspection results, documenting non-conformances, and reviewing and closing out of completed work order tasks and associated inspection documentation. Evaluate the adequacy of specific programs used to train and test inspection, examination, and testing personnel. Develop, write, review, and approve inspection, examination, and testing procedures and evaluate the adequacy of such procedures to accomplish the inspection, examination, and test objectives. Conduct surveillances, observations and submit reports and recommendations. Analyze data from surveillances and observations of work activities and documentation to identify problems. Summarize data and major points and submit reports to management for review and action. Maintain files, charts, and status reports on progress of inspections and documentation. Assist in developing new procedural controls to address the quality control aspects of the Quality Management System (QMS) Perform independent oversight of S.R. Smith programs and processes through use of performance-based techniques. Responsible for written and verbal reporting of the conclusions of the assessments under the cognizance of a lead auditor. Routinely monitor plant and industry information to remain cognizant of assigned technical areas, and interface with line personnel, industry contacts, and regulatory agencies. Perform other duties as assigned. WHAT WE SEEK 5+ years of quality control inspection experience or equivalent combination of education and experience required to perform at this level. Must have experience both in MRB and RMA's areas including analysis and disposition of product as well as accurate segregation to prevent unintended use. The ability to interpret engineering specifications/drawings for disposition of products. Interpersonal skills, written and oral communication skills sufficient to organize, maintain and collaborate with other departments to accurately complete paperwork, understands documentation and effectively communicates with fellow employees for disposition of products. Extreme attention-to-detail, especially in the documentation of Non-Conforming product, Corrective Actions and disposition of materials. Proficiency in the use of Microsoft Excel and Microsoft Word as well as email's. Basic knowledge of measurement instruments (e.g., microscope, optical comparator, caliper, micrometer, pins gauge and gauge blocks). Good arithmetic skills are required. Must have good English written and verbal communication skills. Forklift driver certified a plus. EDUCATION • High school diploma or equivalent required WHAT WE OFFER An exciting opportunity to dive in and begin your career with a company that offers a competitive total rewards package that includes: 2 weeks of paid vacation 11 paid Holidays Full range of health benefits including medical, dental & vision, short & long-term disability 401(K) matching (100% of first 3% contributed, 50% of the next 2%) Health and wellness programs / gym reimbursement Educational assistance up to $7,000 per year Company sponsored FUN events! Generous product discounts WHO WE ARE Fluidra is a publicly listed company focused on developing innovative products, services and IoT solutions for the residential, commercial and wellness pool markets, globally. The company operates in over 45 countries, has over 7,000 employees and owns a portfolio of some of the industry's most recognized and trusted brands: Polaris , Jandy , CMP, S.R. Smith, and Zodiac . We also sell products under the Cover‐Pools , iAquaLink , Grand Effects , Dell and Nature2 names. With these combined resources we're able accelerate innovation in critical areas like energy-efficiency, robotics and the Internet of Things. Our focus is on creating the perfect pool and wellness experience responsibly. We take our mission to heart, and our employees embody these guiding principles in everything we do: passion for success, honesty & trust, customer collaboration, teamwork and inclusion, learn and adapt, excellence and innovation. Don't meet every single requirement listed? At Fluidra, we thrive on building an inclusive workspace, so if you are excited about this role and your past experience doesn't align perfectly, we encourage you to apply anyways! You may be just the right candidate for this role or another role in the organization. Fluidra is proud to be an equal opportunity employer. Fluidra recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, or any legally protected characteristic. #zip #LI-MG1

Job Description Construction Materials Testing Technician III Cornerstone Engineering, Inc. Nashville TN At Cornerstone Geotech Services, we specialize in providing exceptional geotechnical engineering services tailored to meet our customers unique project needs. With our extensive expertise in the field, we bring a wealth of knowledge and a commitment to excellence to every project we undertake. Our team of skilled professionals excels in performing comprehensive field and laboratory testing, observation, and inspection of various construction materials, including soils, aggregates, concrete, asphalt, and steel. We understand the critical role that accurate data plays in the success of our clients' projects, which is why we meticulously communicate with project stakeholders, including project managers, engineering technicians, client representatives, and contractors' representatives, to ensure a thorough understanding of project requirements and to deliver precise testing, observation, and inspection results. Position Overview: As a Construction Materials Testing Technician III (CMT III), you will conduct construction material testing, communicate results, and ensure adherence to safety standards, while also assisting with scheduling and receiving training for increased responsibilities in construction operations. Roles and Responsibilities: · Conduct field and laboratory testing of construction materials (e.g., soils, concrete, asphalt). · Communicate project requirements and results to stakeholders. · Transport material samples and documentation for further analysis. · Prepare and submit written and digital reports to the Project Manager. · Assist with scheduling and dispatch. · Perform basic testing and observation duties under supervision. · Obtain ACI certification for reinforcing steel and conduct · Conduct soil compaction tests using nuclear density gauges. · Perform Masonry inspections and conduct grout/mortar testing · Ensure construction aligns with design drawings. · Discuss data accuracy with Project Manager. · Submit documentation and communicate results as directed. · Receive progressive training and increased responsibilities. · Maintain flexibility for early construction start times. · Adhere to safety rules and practices. · Maintain quality standards and equipment · Conduct Post tension inspections before and after concrete placement Job Requirements: · High School Diploma · Valid Driver's License · Minimum 5 years in the field · Ability to work outside in different weather environments · ACI Technician Level 1 · OSHA 10 · CWI, ICC, PTI, + NICET would be a bonus! · Willing to work flexible hours, outside of the standard 8am-5pm Rewards & Benefits: · Competitive salary based on experience and education. · Medical insurance for the employee (portion of premium cost paid by employer). · Vision insurance for the employee (100% of premium cost paid by employer). · Dental insurance for the employee (100% of premium cost paid by employer). · Spouse & children's insurance can be obtained at competitive group rates. · Paid time off bank. · Focus on work-life balance. · 401k: Safe-Harbor match contribution of 3% of employees' salary. Corporate Culture: At Cornerstone, we believe in a collaborative approach that is founded on the principles of Commitment, Excellence, and Integrity to our clients and our team members: Commitment to Staff and Clients Treat others with respect. Set and work toward common goals. Communicate clearly and effectively to avoid misunderstandings. Excellence in Performance and Production Provide value-added benefits. Exceed client expectations. Deliver services and products on time and budget. Integrity in Behavior Deal with clients and associates fairly. Practice honesty in all endeavors. Focus on a servant attitude. The successful candidate will become an integral member of a team focused on living these principles daily. We look forward to welcoming the right member to our growing team!

The QC Tech provides data collection and reporting for all manufacturing assembly operations. Associates must accurately record and report this data to operations and provide corrective and containment assistance to the manufacturing team. Note that this role includes a sign on $500 bonus at the completion of 120 Days. Essential Functions: This position is responsible for supporting manufacturing operations Collect accurate inspection data and be able to report these findings to operational personnel Maintain a safety and customer service mindset at all times Assure that analytical equipment is in good working order and that inspections and maintenance activities are executed on schedule Manage QC audit routes and complete requirements by their scheduled completion Identify, correct, and document discrepancies Notify customer with concerns and work collectively with manufacturing and technical personnel to resolve issues Document and report non-conformances and identify equipment trends Serve as a back-up for other QC Techs Maintain a safe and clean work environment Meet or exceed all site contractor requirements, including random drug screening, safety practices, ethical conduct, and any other appropriate requirements Effectively communicate with management, maintenance, and other employees in a timely manner when quality activities dictate action Develop proficiency to train and coach others May perform other duties as assigned by the Supervisor or Site Manager Minimum Requirements / Qualifications: High School degree or equivalent Fluency in English (written and spoken) required High speed manufacturing machine experience preferred Electrical, Mechanical, or QC/QA background preferred Must demonstrate excellent customer service Must demonstrate self motivation, initiative, honesty, integrity, and attention to detail Ability to identify best practices and bring innovation to the work environment Must be able to learn basic electrical and mechanical concepts Must be able to work overtime, weekends, and holidays as assigned Core Competencies: Commitment to Excellence - Check your work Customer Relationship Management - communicate with customers to deliver better service Methodical Approach - troubleshooting Team Building Physical Demands of the Position: Works in close proximity to manufacturing equipment Walks 2 - 4 miles in an 8 hour shift Stands greater than four hours at a time Stoops and bends below knee level 8 - 10 times an hour Lifts and carries less than 50 pounds but greater than 25 pounds repetitively Pushes / pulls objects greater than 25 pounds Reaches out Reaches overhead Repetitively uses feet Repetitively uses hands Grips with hands

The Sub Fabrication Quality Assurance Inspector is responsible for overseeing sub-fabricators quality programs to assure best quality product will be fabricated to the job specifications and Cooper Steel's standards. PRIMARY DUTIES AND RESPONSIBILITIES Promote a strong quality culture throughout the company maintaining Cooper Steel's core priorities: Safety, Quality, Production. Collaborate with sub-fabricators to prevent and resolve quality issues and promote continuous improvement. Visit sub-fabrication shops to monitor and verify adherence to AISC and/or company quality standards. Audit sub-fabricators' quality documentation, including inspection reports, NDT records, welder qualifications, and MTRs, with stricter processes for non-AISC-certified companies. Confirm that sub-fabricators maintain accurate material traceability and current certifications. Identify nonconformances, document findings, and assist with corrective actions. Maintain records on sub-fabricators in accordance with company procedures. Review the company's Approved Sub-Fabricator List based on performance and compliance, including NCR tracking. Communicate inspection results and concerns to the QA Manager and project teams promptly and professionally. Work with minimal supervision to complete tasks assigned. Provide evaluations and recommendations on performance of systems and operations. Stay current with relevant AISC, AWS, and ASTM standards. Other duties as assigned. SUPERVISORY RESPONSIBILITIES No supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE 3-5 years of experience in quality or fabrication in the structural steel industry. Working knowledge of AISC 207, AISC 360, AISC 303 and AWS D1.1. Familiarity with NDT methods, welding processes, and fabrication documentation. Ability to read and interpret shop drawings, weld symbols, and specifications. Valid driver's license and ability to travel regularly to sub-fabricator locations. Certified Welding Inspector (CWI) or equivalent certification (preferred). Experience with AISC certification programs and audits (preferred). OTHER SKILLS Strong functional and technical skills; ability to communicate effectively with a diverse range of individuals; good judgment; strong attention to detail and organizational skills; ability to work effectively with others; computer literate; highly developed organizational, planning and oral and written communication skills. While performing certain duties of the job, the employee is required to stand, stoop, bend, twist, lift, pull, and reach. Use of hands for gripping and grasping required. Specific vision abilities are required. Lifting is required up to 75 lbs. Must be flexible in hours worked and willing to work overtime. WORK ENVIRONMENT Position is primarily in a typical office setting that involves everyday risks or discomforts that require normal safety precautions. The position performs work occasionally in a Shop setting which includes a variety of working conditions. These include the following conditions: noise level fluctuations from moderate to high, use of personal protective equipment, machine/equipment use. Position involves everyday risks or exposure to elements that require safety precautions.

The Quality Technician trains employees to execute quality procedures; ensures the routine maintenance of all testing equipment; works with personnel in other departments to resolve product and service quality problems; oversees the Lab Technician; assists Supervisors with "in-house" quality decisions and performs all required administrative functions. ESSENTIAL FUNCTIONS: Compliance with all safety rules for personnel and facility protection as defined in the Plant Employee Manual. May train Lab Technician and review test results. May train Supervisors and Slitter Operators to identify steel defects. Trains affected employees in the use of measuring equipment. Maintains calibrations on lab test equipment. Makes decisions on the conformance of products to customer specifications during in-process inspections. Works with Sales, Purchasing, Production, and Customers on an "in-house" team to resolve problems as needed. Works with Purchasing and Production Planning on material problems and possible choices of material for a specific job as needed. Conduct internal ISO audits as needed. Performs testing on production jobs as needed. Maintains laboratory equipment and supplies. Verifies that jobs meet customer requirements. Assist Quality Management for projects related to research and development, production technology, and quality control. Maintain and control quality documents. Other duties as assigned. EXPERIENCE AND EDUCATION Associate degree or equivalent experience; 2-5 years in the steel industry; 1-3 years in quality EQUIPMENT, AIDS, TOOLS: This person must be able to use telephone, computer, calipers, ultrasonic gauge, digital Rockwell tester, analog Rockwell tester, micrometer, hand tools, tape measure, crimpers, band saw, router, belt sander, tensile tester, and spectrometer. WORKING CONDITIONS: This work site is in the plant. The plant is on one level, accessible directly from the parking lot. Riding cages for overhead cranes are accessible by ladders; there are stairs in the rail pit. There are seasonal variations in temperatures from 60 to 95+ degrees; some exposure to diesel fumes as trucks move through the plant; noise level varies depending on number of machines in operation. Potential hazards include cuts and crush injuries. SUPERVISION AND CO-WORKERS/ATTENDANCE REQUIREMENTS: Supervision and/or co-worker assistance available at all times. Unscheduled absences may result in failure to meet customer requirements due to insufficient staffing. CONSEQUENCES IF ESSENTIAL FUNCTIONS NOT PERFORMED Failure to observe safety procedures in when in the plant may result in serious injury up to fatality and/or damage and loss of material or property. Failure to resolve quality issues promptly may result in production delays, which may result in customer delivery delays, which may in turn result in the loss of business. Failure to resolve customer quality issues may result in customer dissatisfaction, which may, in turn, result in the loss of business. Failure to complete appropriate paperwork may result in inventory shortage through loss of material or improper billing of the customer. Management retains the right to change this job description or add to the duties at any time.

The QC Tech provides data collection and reporting for all manufacturing assembly operations. Associates must accurately record and report this data to operations and provide corrective and containment assistance to the manufacturing team. Note that this role includes a sign on $500 bonus at the completion of 120 Days. Essential Functions: This position is responsible for supporting manufacturing operations Collect accurate inspection data and be able to report these findings to operational personnel Maintain a safety and customer service mindset at all times Assure that analytical equipment is in good working order and that inspections and maintenance activities are executed on schedule Manage QC audit routes and complete requirements by their scheduled completion Identify, correct, and document discrepancies Notify customer with concerns and work collectively with manufacturing and technical personnel to resolve issues Document and report non-conformances and identify equipment trends Serve as a back-up for other QC Techs Maintain a safe and clean work environment Meet or exceed all site contractor requirements, including random drug screening, safety practices, ethical conduct, and any other appropriate requirements Effectively communicate with management, maintenance, and other employees in a timely manner when quality activities dictate action Develop proficiency to train and coach others May perform other duties as assigned by the Supervisor or Site Manager Minimum Requirements / Qualifications: High School degree or equivalent Fluency in English (written and spoken) required High speed manufacturing machine experience preferred Electrical, Mechanical, or QC/QA background preferred Must demonstrate excellent customer service Must demonstrate self motivation, initiative, honesty, integrity, and attention to detail Ability to identify best practices and bring innovation to the work environment Must be able to learn basic electrical and mechanical concepts Must be able to work overtime, weekends, and holidays as assigned Core Competencies: Commitment to Excellence - Check your work Customer Relationship Management - communicate with customers to deliver better service Methodical Approach - troubleshooting Team Building Physical Demands of the Position: Works in close proximity to manufacturing equipment Walks 2 - 4 miles in an 8 hour shift Stands greater than four hours at a time Stoops and bends below knee level 8 - 10 times an hour Lifts and carries less than 50 pounds but greater than 25 pounds repetitively Pushes / pulls objects greater than 25 pounds Reaches out Reaches overhead Repetitively uses feet Repetitively uses hands Grips with hands

Contour Airlines is a long-established aviation services company with a diverse range of capabilities. At Contour Airlines, our core values guide every action and decision. We are unwavering in our commitment to integrity and safety, which remain at the heart of all our business lines. Our team members exemplify an attitude of excellence, consistently striving to think like a customer. We believe there is strength in unity, and we work together as a team to achieve ambitious goals. Full-Time Employee Benefits & Compensation Overview As a full-time employee of Contour Airlines, you are eligible for the following benefits and programs: Group Insurance Plans Health, Vision, and Dental Coverage-Effective the first day of the month following your hire date. Additional voluntary benefits include short-term/long-term disability and life insurance policies. Eligibility begins the first day of the month following your hire date. 401(k) Savings Plan Eligibility begins the first day of the month following your hire date. The Company offers a matching contribution up to 6% of your eligible compensation. Enrollment guidelines and a 401(k) Enrollment Guide will be provided during onboarding. Paid Sick Leave Accrual of up to 56 hours of paid sick leave per year. Unused sick leave rolls over annually until your sick bank reaches 480 hours. Vested Vacation Hours Eligible to receive vacation hours on January 1st following your hire date. These hours will be vested and available for use in accordance with Company policies. Non-Revenue/Space Available (NRSA) Travel Privileges NRSA (non-revenue/space available) travel privileges on Contour Airlines upon hire and access to MyID Travel after 6 months of service Leaves of Absence Eligible for various types of leave, including: Medical Leave Non-Medical Family Care Leave Maternity and Paternity Leave Personal Leave Detailed leave policies are outlined in the Contour Airlines Employee Handbook, which will be provided during onboarding. Compensation Details Pay Rate: starting hourly rate is between $27.00 and $37.00 per hour based on your prior work experience. You will also receive an additional $1.00 override for working the nightshift. Step Pay Increases: Eligible for a $1.00 increase each year on your pay anniversary date, up to a maximum rate of $42.00 per hour. Retention Bonus: After reaching the top of the pay scale, eligible for an annual retention bonus of up to $2,000.00 based on performance. Overtime Pay: Hours worked in excess of 40 per week will be paid at 1.5 times your hourly rate. Holiday Pay: Work performed on Contour Airlines' observed holidays will be compensated at 2 times your hourly rate. A list of Company-recognized holidays is outlined in the Employee Handbook. Equal Employment Opportunity Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Accommodations Contour Airlines is committed to providing reasonable accommodations to applicants and employees. If you require accommodations during the application or onboarding process, please contact Human Resources at *****************. Join Our Growing Team Contour Airlines' rapid growth has created exciting career opportunities. We invite you to become part of our family and contribute to our ongoing success. Position Summary The Quality Control - Aircraft Inspector is responsible for ensuring all aircraft maintenance, inspections, repairs, and documentation are carried out in strict compliance with FAA regulations, manufacturer's specifications, customer requirements, and Company standards. This role is critical to maintaining the highest levels of airworthiness, safety, and operational reliability. Essential Duties & Responsibilities Perform incoming, in-progress, and final inspections of aircraft, components, and articles maintained by the Company. Monitor workmanship and materials to ensure compliance with FAA regulations, manufacturer guidelines, and Company procedures. Verify that all required maintenance and inspection documentation is completed accurately and in compliance with regulations. Oversee proper use of tools, equipment, and safety procedures, ensuring compliance with OSHA, EPA, and other regulatory requirements. Confirm that all maintenance work meets FAA, customer, Company, and manufacturer standards of quality. Complete inspection records in accordance with the Repair Station Manual / Quality Control Manual and applicable customer guidelines. Conduct surveillance of maintenance practices, storage areas, shops, and housekeeping standards, initiating corrective actions as required. Provide constructive feedback to improve efficiency, productivity, quality, and safety. Assist Crew Chiefs and Supervisors in determining the scope of required repairs. Perform weight and balance procedures. Release aircraft or components back into service following approved inspections. Participate in special projects or other duties as assigned by leadership. Qualifications Minimum 23 years of age. Valid driver's license with a good driving record. FAA Airframe and Powerplant (A&P) Certificate required. Part 65 Certification and minimum 2 years of aviation experience. 18-months minimum experience with Embraer Regional Jet 135/145 (ERJ) and/or Bombardier CRJ200 (CRJ) required. High school diploma or GED required; advanced training preferred. Must be legally authorized to work in the U.S. and able to travel internationally. Able to pass a 10-year work history review, criminal background check, and DOT pre-employment drug screening. Must submit to and pass FAA- and Company-mandated random drug and alcohol testing. Proficiency in English (reading, writing, speaking); Spanish proficiency is a plus. Must be familiar with FAR Part 135 and Part 145 operations, inspection methods, techniques, and tools. Must be proficient with inspection equipment and visual aids appropriate to the task. Completion of Quality Inspection training required. Knowledge, Skills & Abilities Strong knowledge of FAA regulations, maintenance procedures, and safety standards. Ability to work in a fast-paced environment with shifting priorities. Strong organizational skills with attention to detail. Excellent written and verbal communication skills delivered with professionalism. Ability to work independently and as part of a team. Strong interpersonal skills with the ability to interact with diverse personalities. Demonstrated ability to lead, mentor, and support others. Ability to manage multiple complex projects simultaneously. Self-motivated with a commitment to excellence and continuous improvement. Work Schedule & Environment Nightshift position: 4:00 PM - 2:30 AM, including weekends and holidays. Must be able to work flexible hours as operational needs require. Work is performed in a hangar and ramp environment with exposure to noise, weather, and aircraft operations. Must be able to work in a safe, professional manner while adhering to all regulatory requirements, including OSHA, EPA, state, and federal guidelines. Disclaimer: The above statements are intended only to describe the general nature and level of work required of the referenced position; they are not intended to be an exhaustive list of all responsibilities, duties, and skills required of individuals in the position. Please be advised that the duties and expectations of this position may be subject to change.

Job DescriptionDescription: Homestyle Direct (“HSD”) is an emerging and rapidly growing Food-as-Medicine home-delivered meal company dedicated to delivering high-quality, delicious, and healthy prepared meals to Medicaid and Medicare beneficiaries nationwide. The company was founded in 1997 in Twin Falls, ID, where it has grown substantially and is expected to exceed $50M in revenue and $10M in EBITDA in 2024. The Company produced and transported ~6 million meals in 2023. Meals are currently procured, warehoused, assembled, packaged, labeled, frozen, and shipped from the company's HQ in Twin Falls, ID. However, due to recent growth, HSD plans to expand operations by opening an additional facility in the Southeastern United States in 2024. The Quality Technician plays a vital role in monitoring and maintaining all aspects of product safety and quality that enhance the customer experience and our food safety adherence. As such, the Technician performs multiple checks on product in finished goods form and as product is processed to meet our internal standards for food safety and quality. Feedback to quality process owners (e.g. operations technicians and management) with immediate corrective actions implemented is the primary means of ensuring process quality and, subsequently, a high integrity product. Responsibilities: Conduct regular quality monitoring checks to verify that all product meet customer and legal requirements. (i.e. weight control, seal monitoring, metal detection, meal configuration). Daily temperature checks in the production cooler/freezer and shipping freezer. Monitor chemicals used for cleaning and sanitation. Support the receiving process by monitoring incoming raw materials, inspection of carriers and support inventory control. Environmental Monitoring Program testing. Ensure sanitation of the facility is in compliance with food safety requirements. Monitor critical control point temperatures throughout the production process to ensure temperatures are meeting the standards outlined in the company's HACCP plan. Monitoring use and highlighting for disposal of aging finished product or work in progress. Collaborate with colleagues in Supply Chain, Operations, and Quality functions to continually improve capability and process efficiency. Make decisions concerning product quality, including shutting down the line when processes do not conform to specifications. Other duties - to help production when needed, cleaning, etc. Requirements: Qualifications & Education Requirements: A fine attention to detail Effective problem-solving skills Accurate data and record keeping skills Ability to multitask Capable of leaning food safety and HACCP principles Physical endurance and the ability to stand for long periods of time Capable of leaning food safety and HACCP principles

The QC Tech provides data collection and reporting for all manufacturing assembly operations. Associates must accurately record and report this data to operations and provide corrective and containment assistance to the manufacturing team. Note that this role includes a sign on $500 bonus at the completion of 120 Days. Essential Functions: This position is responsible for supporting manufacturing operations * Collect accurate inspection data and be able to report these findings to operational personnel * Maintain a safety and customer service mindset at all times * Assure that analytical equipment is in good working order and that inspections and maintenance activities are executed on schedule * Manage QC audit routes and complete requirements by their scheduled completion * Identify, correct, and document discrepancies * Notify customer with concerns and work collectively with manufacturing and technical personnel to resolve issues * Document and report non-conformances and identify equipment trends * Serve as a back-up for other QC Techs * Maintain a safe and clean work environment * Meet or exceed all site contractor requirements, including random drug screening, safety practices, ethical conduct, and any other appropriate requirements * Effectively communicate with management, maintenance, and other employees in a timely manner when quality activities dictate action * Develop proficiency to train and coach others * May perform other duties as assigned by the Supervisor or Site Manager Minimum Requirements / Qualifications: * High School degree or equivalent * Fluency in English (written and spoken) required * High speed manufacturing machine experience preferred * Electrical, Mechanical, or QC/QA background preferred * Must demonstrate excellent customer service * Must demonstrate self motivation, initiative, honesty, integrity, and attention to detail * Ability to identify best practices and bring innovation to the work environment * Must be able to learn basic electrical and mechanical concepts * Must be able to work overtime, weekends, and holidays as assigned Core Competencies: * Commitment to Excellence - Check your work * Customer Relationship Management - communicate with customers to deliver better service * Methodical Approach - troubleshooting * Team Building Physical Demands of the Position: * Works in close proximity to manufacturing equipment * Walks 2 - 4 miles in an 8 hour shift * Stands greater than four hours at a time * Stoops and bends below knee level 8 - 10 times an hour * Lifts and carries less than 50 pounds but greater than 25 pounds repetitively * Pushes / pulls objects greater than 25 pounds * Reaches out * Reaches overhead * Repetitively uses feet * Repetitively uses hands * Grips with hands