Quality inspector jobs in Galveston, TX

Job Description : For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity after and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

As a Quality Inspector, you'' be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with global standards. As a Quality Specialist, you will be responsible for: + Inspecting parts, assemblies and subassemblies to required drawings and prints. + Initiating non-conformance reports on all parts and assemblies that are not to drawing and print specifications. + Assuring that manufactured units meet quality control procedures, engineering specifications and customer requirements. + Initiating corrective action requests when conditions adverse to quality are repetitive in nature. + Partnering with manufacturing management and internal process teams to eliminate the causes of quality problems + Completing, inspecting and distributing all quality records and documents and performing specialized testing as required + Verifying tests as required on all components and completed assemblies. + 1 x 12 hour shifts this year to provide 24/7 coverage from Monday to Sunday. + Candidate will start on day shift due to training then move to nights. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Day Schedule: 6 on / 3 off ( 12hr shifts).

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Quality Control Inspector II (Current Aerospace Industry Exp. Req.) Employment Type Full-Time Benefits Offered Dental, Life, Medical, Paid Time Off, Retirement, Vision Compensation $20 to $23 per hour to be determined at the time of the interview with our customer. This is a Permanent position. Our customer is a leading and growing company in the aerospace market that has grown every year since our inception over 20 years ago. Key Responsibilities and Accountabilities: · Examine materials and final products, calculates tolerances and dimensions using hand tools, verifies conformance to standards, reads work orders, routers and blueprints to determine product specifications as a part of inspecting products and materials in process and in final inspection · Document / record quality inspection information · Evaluate information to determine whether parts and materials conform to regulations and standards · Maintain current knowledge of organizational policies and procedures, federal and state policies and directives · Analyze data or information · Establish and maintain interpersonal relationships · Evaluate information to determine compliance with standards Professional Skills: · HS diploma or equivalent or equivalent combination of experience/education · 4 or more years of related experience required · Intermediate knowledge of mathematics and applications · Basic AS9100 knowledge · Intermediate knowledge of machines and tools, including their designs, uses, repair, and maintenance. This includes Keyence inspection equipment, optical comparators, digital micrometers and calipers, gage pins, ring gages, dial indicators, concentricity gage, thread segments Intermediate knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints (including geometric dimension and tolerancing features), drawings, and models as well as advanced knowledge of geometric dimension tolerancing (GD&T) features Physical Requirements and Working Condition: · Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, and ladders · Must be able to work at heights utilizing fall protection equipment (man lifts, ladders, and stand) · Must be able to lift up to 45lbs · Subject to environmental conditions -protection from weather conditions but not necessarily from temperature changes · Subject to hazards to include a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat or exposure to chemicals · Subject to loud constant noise Subject to atmospheric conditions such as fumes, odors, dust, mists, gases, or poor ventilation Employee Acknowledgement: The above information on this description has been designed to indicate the general nature and level of work performed at this client's location. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. Due to nature of defense contracts, US Citizenship is a requirement. As part of our Drug and Alcohol Policy, upon acceptance of any offer of employment, employment will be conditional of successfully passing a background check and required drug testing. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

As a Quality Inspector, you''be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with global standards. As a Quality Inspector, you''be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with Baker Hughes global standards. This is for a third shift position (9pm-5: 30am). Training will be on the first and second shifts until training is complete (training timeframe dependent on competencies) -(1st)5am-1: 30pm and (2nd)-1pm-9: 30pm. The plant runs 24/7 so they need coverage 7 days a weeks. The inspector will work a 8 hour shift for 4 to 6 days a week, as dictated by necessity of the plant. Must be available to work weekends, as necessary. Key responsibilities: •Inspecting parts, assemblies and subassemblies to required drawings and prints •Initiating non-conformance reports on all parts and assemblies that are not to drawing and print specifications. •Assuring that manufactured units meet quality control procedures, engineering specifications and customer requirements. •Initiating corrective action requests when conditions adverse to quality are repetitive in nature. •Partnering with manufacturing management and internal process teams to eliminate the causes of quality problems •Completing, inspecting and distributing all quality records and documents and performing specialized testing as required •Verifying tests as required on all components and completed assemblies. •1 x 12 hour shifts this year to provide 24/7 coverage from Monday to Sunday. •Candidate will start on day shift due to training then move to nights. Skills & Competencies: •Be able to read and correctly interpret prints / drawings and specifications •Display understanding of defects, problem-solving skills or an enthusiasm to learn and develop your skill set in a hands-on environment •Have excellent communication skills and the ability to be a valuable team player Work Environment: •Fast paced and noisy environment with constant movement. •Regular lifting and/or moving up to to 50 lbs. Qualifications: •Have a High School Diploma or equivalent level of education •Demonstrate proven experience in a Quality Technician or Inspection role Shifts: •2nd shift: Monday -Friday from 3pm - 3am (12 hour shift for 4 to 6 days a week) •Must be able to work some weekends

Job Description Reports to: Quality Control Manager Shift: Mondays - Thursdays 3pm to 1:30am Primary Responsibility: This position is responsible for product quality of the complete MIRATECH product line, in the Houston, Texas What You'll Do: Dimensional Inspection to verify the product matches the sales drawing. This inspection would include but not limited to the following. Diameter, Overall Length, Nozzle Projection, Nozzle Orientation, Test Ports, Couplings, Drains, Etc. Weld Inspection to verify all welding meets or exceeds the weld details on the fabrication drawings. This inspection would include but not limited to. Weld Profile, Weld Size, Weld Length, Porosity, Cracks, Undercut, Inclusions, Excessive Spatter, Etc. Visual Inspection to verify that the finished product meets the overall standards of MIRATECH. This inspection would include but not limited to the following. Paint Defects, Deformation, Defects, Tagging, Labeling, Etc. Labeling / Tagging - verify that all the products all labeled, marked, or tagged with the correct job number and stock code. Maintain job travelers in job packets, inspection reports, test and quality checks. Report any defects, issues, or non-conformities to the Quality Control Manager. Assist with 3rd Party Inspections that are coordinated through the Quality Control Manager. Inspect raw materials in the Non-Conformance Department to verify the following match the Material Traceability Report (MTR) provided by the vendor; Thickness, Specification, Grade, Heat Number, Slab Number, Etc. Calibrate inspection and testing equipment to ensure accuracy and reliability. Ensure that all safety standards are adhered to during inspections and testing. Communicates with other QC Inspectors and takes ownership and initiative. How to Qualify: High school diploma Blueprint interpretation Using measuring tools such as tape measure, micrometer, level, fillet weld gauges, etc. Experience with steel fabrication and welding. Experience with quality related procedures and processes. English and Spanish speaker (preferred). Communication and interpersonal skills to liaise with quality control manager, production supervisor, direct laborers, and cross-functional teams. What's In it For You: Health, Dental & Vision Insurance Annual Bonus Program $350 Annual Wellness Credit Flexible Spending Account (FSA) 401k with match up to 5% Life insurance Disability insurance 4 days of paid sick leave annually 12 days PTO annually (prorated based on start date) $350 Production Reimbursement Program Equal Opportunity: MIRATECH is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. Job Posted by ApplicantPro

Job Description Key Activities and Accountabilities Perform inspection (visual, dimensional, gauging and comparison as appropriate) on new manufactured, repaired and modified equipment and components pre, during and post qualification testing Raise Non-conformance Reports against non-conforming equipment / components and manufacturing, repair, modification quality records Work in accordance with Goods Inwards Quality Procedures Ensure inspection measuring equipment is kept safe, clean, fit for purpose and in current calibration Perform inspection surveys on returned operational equipment (Rosehill Resource and Customer owned) Perform Quality Control checks to Operations Support processes at key stages (i.e. prior to final shipment, job card completion etc.,) Perform Non Destructive Testing on components for certification purposes Witness pressure testing of equipment for certification to ensure that the tests are conducted to the required standards Job Knowledge and Qualifications Experience in a similar role - inspection of mechanical components & assemblies Trained and Experienced Internal Quality Auditor would be an advantage Good knowledge of workshop procedures and practices Knowledge of Risk Assessment/Job Card/Engineering Test Procedure compliance Able to display quality control/certification techniques Knowledge of MS Office (Excel, Word, Outlook & Teams) Ability to read and interpret drawings & technical documentation

Perform precision mechanical and electrical inspection/test of custom manufactured and commercial off the shelf parts and assemblies. Will provide inspection support in the areas of incoming quality control, internal first articles and in-process inspections. - Inspect machined/molded parts to assure conformance to engineering drawings and/or other documentation. - Document inspection results using manual and computer-based systems. - Generate Material Non-Conformance reports for items not meeting specifications. - Interface with personnel within the quality department regarding work assignments and priorities. - Interface with personnel in engineering, manufacturing and sales to resolve any issues relating to specifications or non-conformances. - Other duties as assigned by the department lead, supervisor or manager. Previous experience in a precision mechanical inspection environment, such as a machine shop, molding shop or other fabrication/manufacturing company.Hands-on experience with common inspection tools such as: * Micrometers * Calipers * Pin/Plug Gages * Ring Gages * Go/No Go Gages * Height Gages * Profile Projectors * Profilometers * Surface Plates * Reading and interpretation of engineering drawings and specifications. * Computer skills, including familiarity with Microsoft Word and Excel. * Strong communication skills, both verbal and written. * Experience in use of and/or programming of automated inspection tools, such as vision inspection systems and CMMs. * Experience working in an ISO 9001 manufacturing environment. Education/Training: Required: High school diploma or equivalent (two years of college preferred), 3 to 5 years' experience in a manufacturing environment as a quality control inspector/technician. Preferred: ASQ Certified Quality Inspector. Working Conditions & Safety Concerns: Operates sophisticated inspection/test equipment in a laboratory and/or shop floor manufacturing environment. Works at a PC station as needed. Assists manufacturing personnel on the floor as needed. Some physical activity required. General safety practices followed, including use of personal protective equipment (PPE) such as safety glasses and steel toe shoes as required. Equal Employment Opportunity: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be able to work without sponsorship/authorization for any employer in the U.S.

Job DescriptionQC Inspector - 77073 Night Shift: 5:00 PM - 5:30 AMDays: Monday - FridayFlexibility Required: Must be open to working weekends as needed Pay: Based on Experience Position OverviewThe Quality Control (QC) Inspector is responsible for inspecting manufactured or processed products to ensure compliance with customer contract specifications, internal quality standards, and regulatory requirements. This role focuses on dimensional accuracy, tolerances, hardness, and overall product quality.Essential Responsibilities: Inspect products to verify compliance with order specifications, company quality systems, and applicable legal requirements Approve or reject products and document inspection results Measure and evaluate Dimensions and tolerances Angles, radii, contours, clearances Thread lead and surface finish Perform hardness testing on parts Inspect and verify gauges and measuring instruments for accuracy and conformance Prepare inspection reports, labor cards, job tickets, and required documentation Maintain established productivity and quality standards Communicate effectively with production, management, and other departments Maintain a clean, neat, and organized work area Follow all Good Manufacturing Practices (GMP) and safety procedures Ensure machine guards and safety equipment are in place and functioning properly Monitor and ensure required Personal Protective Equipment (PPE) is used at all times Perform additional duties as assigned QualificationsHigh School Diploma or GED required1-3 years of related quality inspection or manufacturing experience preferred Experience & KnowledgeAbility to perform a variety of inspection tasks Ability to read and interpret technical drawings, specifications, procedures, and regulations Ability to effectively communicate with managers, customers, and team members Working knowledge of word processing, manufacturing, database, and order processing systems Skills & CompetenciesStrong attention to detail and documentation accuracy Excellent organizational, time-management, and communication skills Solid math skills using whole numbers, fractions, and decimals Safety-focused and quality-driven mindset Ability to prioritize tasks in a fast-paced environment Physical RequirementsAbility to stand or sit for up to 8 hours Frequent hand and finger dexterity and fine motor coordination Occasional walking, climbing, balancing, and stooping Ability to lift up to 5 lbs frequently and up to 20 lbs occasionally Vision requirements include close vision, depth perception, color vision, and focus adjustment

Job Description A Quality Control (QC) Inspector for threaded pipes is responsible for ensuring that the threads on pipes meet specific standards and tolerances. This role involves the utilization of precision gauges and instruments to measure machined threads and the outside diameter of pipes to determine thread height, taper, thread ovality, and other critical dimensions. KEY RESPONSIBILITIES: Setup all hand tools readily accessible to the job being performed Review work order packet for job to verify correct product is to be produced Assure Log Sheets are correct for the product to be produced Coordinate with the Gage Lab for proper gages to measure product Assure gages are mastered and set as required after production starts, as well as during production operation as required Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer Identify all rejected product on Digital Log Sheet and describe reason Identify all rejected physical product as per instructions and alert operator Assure all First and Last Article inspection is conducted as required Alert operator and Supervisor if cause of rejection persists and participates in resolving of reason for rejection Assure that material for order is correct as described on the work order Alert Supervisor and Gage Lab of any concerns regarding performance of gaging or measurement instruments Quality minded individual with a dedication to superior products Follow all applicable work instructions, specifications, and requirements Assist in training of inexperienced inspectors Follow all Company Rules, Procedures and Policies Follow all Company Safety Rules Any other duties as assigned by the Supervisor EXPERIENCE, SKILLS, AND KNOWLEDGE: 1 year experience as production operator/or previous experience as QC inspector in previous company Working knowledge of blueprint reading and basic math. Must be fluent in English, with the ability to read, write, and communicate effectively. Ability to understand and execute instructions well EDUCATION, TRAINING, AND CERTIFICATIONS: High School education or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: Teamwork Adaptability Accountability Reliability/dependability Initiative Safety awareness Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail

A Quality Control (QC) Inspector for threaded pipes is responsible for ensuring that the threads on pipes meet specific standards and tolerances. This role involves the utilization of precision gauges and instruments to measure machined threads and the outside diameter of pipes to determine thread height, taper, thread ovality, and other critical dimensions. KEY RESPONSIBILITIES: Setup all hand tools readily accessible to the job being performed Review work order packet for job to verify correct product is to be produced Assure Log Sheets are correct for the product to be produced Coordinate with the Gage Lab for proper gages to measure product Assure gages are mastered and set as required before production starts, as well as during production operation as required Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer Identify all rejected product on Digital Log Sheet and describe reason Identify all rejected physical product as per instructions and alert operator Assure all First and Last Article inspection is conducted as required Alert operator and Supervisor if cause of rejection persists and participates in resolving of reason for rejection Assure that material for order is correct as described on the work order Alert Supervisor and Gage Lab of any concerns regarding performance of gaging or measurement instruments Quality minded individual with a dedication to superior products Follow all applicable work instructions, specifications, and requirements Assist in training of inexperienced inspectors Follow all Company Rules, Procedures and Policies Follow all Company Safety Rules Any other duties as assigned by the Supervisor EXPERIENCE, SKILLS, AND KNOWLEDGE: 1 year experience as production operator/or previous experience as QC inspector in previous company Working knowledge of blueprint reading and basic math. Must be fluent in English, with the ability to read, write, and communicate effectively. Ability to understand and execute instructions well EDUCATION, TRAINING, AND CERTIFICATIONS: High School education or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: Teamwork Adaptability Accountability Reliability/dependability Initiative Safety awareness Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail

Job DescriptionBenefits: 401(k) Dental insurance Health insurance Vision insurance The QC Inspector position is responsible for inspections against the internal quality system (QMS), customer requirements, and industry standards. The QC Inspector is also responsible for inspecting raw material, inspecting finished product, internal process audits, and ensuring general customer satisfaction. Responsibility Including but not limited to: Use of precision tooling and measuring devices such as calipers, micrometers, coating thickness gauge, rulers, tape measures, stamping dies, extensometers, and many more. Writing and filling out QC reports and digital data entry. Use of MS office and internal digital programs. Perform FAI reports and communicate efficiently on the results of FAI. Read and interpret engineered drawings. Use GD&T to perform product evaluations. Inspect to engineered drawings and determine if a product is within tolerance. Issue NCRs against any raw material, process, or finished good product thats not within the required specifications. Will need to read and understand industry standards such as ASTM, ANSI, API, and ISO. Ensure the achievement of quality objectives of the department. Ensure 5S activities and their guidelines are adhered to. Effectively communicate with peers, management, and customers. Others as directed by the QC Supervisor. Experience and requirements: Must have at least a High School Diploma. Must be willing to work in a fast-paced environment. Can work in a team and is a team player. Experience working in an industrial setting. Use of precision measuring devices. Willingness to learn. Is flexible and can work overtime. Must pass a drug test as part of the hiring process. An ideal candidate will also have: Experience with ISO 9001. Can read engineered drawings. Proficient with MS Office. Can read, understand, and interpret industry standards. Can write SOPs, JHAs, and procedures.

Were seeking a detail-oriented Quality Control Inspector to ensure that all manufactured pipe products meet strict quality and safety standards. This role is essential to maintaining compliance and delivering reliable products in a high-volume industrial setting. ️ Responsibilities: Inspect pipe and metal components for defects, dimensional accuracy, and compliance with specifications Conduct visual and physical inspections using calipers, micrometers, and other measuring tools Review blueprints and technical drawings to verify product conformity Document inspection results and maintain accurate records of quality checks Collaborate with production teams to identify and correct quality issues Perform pressure tests, ultrasonic tests, and other non-destructive testing methods Ensure adherence to industry standards and safety regulations Support continuous improvement initiatives and report recurring issues Requirements: Previous experience in industrial quality control, preferably in pipe or metal fabrication Familiarity with inspection tools and techniques Ability to read and interpret technical drawings and specifications Strong attention to detail and organizational skills Basic computer skills for data entry and reporting Must be dependable and able to work in a fast-paced environment Schedule: Monday -Friday 6AM -4PM Sat as needed Package Details

: For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity before and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

We're looking for a highly motivated and self-directed QC Inspector. Responsible for ensuring that the product is within quality standards and specifications. This includes, but is not limited to, maintaining quality and safety standards; visual inspections measurements and functional testing of the product; recording data/test results to validate conformance; and assisting with quality related reports, reviews, and audits as needed. QC Inspector Responsibilities: Performs inspections of Induction Bends, Ductile Iron (DI), Carbon, Alloy Stainless Steel and Saw pipes and Tubes, finished company products according to well defined criteria and specifications. Collect all the required instruments for inspection from the QC Lab. Uses measuring equipment such as calipers, micrometers, gages, optical inspection and computerized inspection devices as needed. Rejects and returns nonconforming materials and/or products that do not meet applicable specifications and requirements. Documents inspection results by completing applicable inspection (red tagging) reports and logs. Maintains manufacturing and inspection related documentation. Supports the quality department with reviews, reports, and audits as needed. Participates in quality control/assurance related activities. Preforming in-process inspections. (pipe, fittings, flanges, valves, tubing, structural steel) Participates in performance improvement activities, utilizes resources efficiently and effectively takes responsibility for own learning needs. Collect all the required instruments for inspection from the QC Lab. Fills out inspection results and test results into ERP Software. Qualifications: 6+months of relevant work experience. Basic Math Skills Ability to communicate effectively (verbal and written) Basic computer skills including, Microsoft, Excel and Word. Maintain good housekeeping / follows safety measures. Bilingual (Spanish & English) Valid DL or ID Yard/Shop Environment; must be able to work in all-weather elements. Must be able to lift up to 55lbs.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

The Quality Control inspector ensures that the functional quality of products is maintained in accordance with established requirements. Primary Responsibilities: Use micrometers, calipers, optical comparator, height gage, test indicator for the purpose of determining the condition of machined parts. Determine machined parts to be acceptable or reject based on the criteria provided. Read and understand machine drawings or blueprints. Understand and properly apply the terms, accuracy, resolution, flatness, roundness, squareness, and concentricity to daily tasks. Properly operate all the measurement equipment in the Inspection Room. Produce inspection reports according to the formats required. Requirements: Candidate must hold a valid high school diploma or equivalent GED certificate. At least 1 year of exposure to quality control processes. Knowledge of CMM operations preferred. Basic knowledge of blueprint reading including understanding dimensions, notes, call outs, bill of materials, surface finishes, tolerances and processes. Equipment knowledge - Demonstrate proper operation a machinist's scale, caliper, and micrometer. Math skills - Display the ability to use a calculator to add and subtract numbers in decimal form. Trigonometry is used in many of the position's tasks. Communication skills - Display the ability to explain the operational steps required to complete a job so that a fellow employee may understand it. Must speak and understand the English language.