Quality inspector jobs in Gardena, CA

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Quality Control Inspector Needed in Camarillo Direct Hire Industry: BioTech, Pharmaceuticals Pay range: $23 - $24/hour Monday - Friday 7am - 3:30pm Must Have * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Job Summary Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Essential Functions * Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; * Conduct inspection and testing related to: ► Incoming product. ► First article. ► In-process. ► Final. * Initiate nonconformance reports (NCR). * Performs all aspects of testing related to manufacturing. o Incoming inspections o In-process inspection. o Final Inspection release of finished goods. o Document review. o Supports cross functional departments investigate potential non-conformance's observed * Ensures that all inspections and procedures are properly completed and documented. * Perform pre and post-inspection of product gamma irradiation process. * Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. * Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations * Prepare and submit Metrics reports to the quality supervisor or QC lead * Comply with all safety requirements ensuring work areas meet standards. * May be required to report to multiple facilities within a 2-mile radius. * Job Order document review and release * Other duties as assigned Education * High School Diploma or equivalent with 2 years of experience in quality control inspections. Required Experience & Competencies * Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. * Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. * Minimum of 2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. * Solid organizational and planning skills required. * Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. * Must be able to work effectively and efficiently in a team environment. * Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. * Must display personal accountability for results and integrity. * Must display eagerness to learn and continuously improve. * Must have uncompromising dedication to quality. * Good general mathematical skills. * General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges * General computer skills. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Job Title: Quality Control Technician Pay Rate: $21 to $23/Hr Duration: 12 Months We are looking for a Quality Control Technician Perform standard quality control testing on incoming raw materials, semi-finished goods, and finished goods according to specifications. Accurately calculate and report test results. Able to locate needed test methods, SOPs, and work instructions in the document management system. Record test data into the SAP database. File and maintain the retain samples; dispose of old retain samples per retention protocols. Maintain a clean working environment, including lab benches, the retain sample room, ovens, and the hood. Participate in Quality Lab 5S activities. Actively participate in daily Quality Lab/department (MOS) meetings. Complete, maintain, and control the required Quality records and/or documents as directed by the department's standard operating procedures. Use proper Good Documentation Practices (GDPs) when recording information. Perform and support validation and calibration of lab equipment, including documenting and reporting equipment issues within the lab. Assist Quality Engineers with complaint investigations and testing samples/reports. Comply with all Health, Safety, and Environmental rules, procedures, and regulations. Support training efforts within the lab and maintain status for all learned test methods and requirements. Proficient in SAP regarding Quality Lab transactions. Also including all responsibilities entailing the upkeep of the Quality Department and any assigned projects determined by the departmental Manager, Supervisor, and Leads. Qualifications: Associate degree in chemistry or equivalent college credit or 3 years minimum technical/lab experience. The Quality Control Technician plays a critical role in ensuring product integrity and compliance by conducting standardized testing and analysis on raw materials, in-process items, and finished goods. This position supports the broader Quality Department by maintaining accurate records, calibrating lab equipment, and contributing to continuous improvement initiatives. The role requires strong attention to detail, proficiency in SAP, and adherence to safety and documentation protocols, while also collaborating with cross-functional teams to uphold quality standards throughout the production process. Experience in Quality Control preferred. Background in materials testing - viscosity testing, melting point testing, and general lab testing. Knowledgeable in the use of laboratory equipment and instruments. Good communication skills - verbal and written. Able to work well in a team environment. Computer literate - MS Office

With a legacy spanning over 35 years, Harris Spice has been a trusted partner and leading supplier of high-quality spices, herbs, and innovative seasoning blends. With international facilities and a global supply chain, we proudly serve multiple channels of trade-including industrial bulk, food service, and retail. Our commitment to excellence, quality and consistency has earned us the trust of some of the nation's largest and most recognized brands. As Harris Spice continues to grow, we are dedicated to cultivating a dynamic, inclusive workplace where innovation thrives. We're looking for diverse, talented individuals who are ready to grow with us and help strengthen a brand known for trust, quality, and bold flavor solutions. Position Overview/Job Summary: We are looking for a 1st shift (4:30am-1:00pm) Quality Control Technician to join our team. The Quality Control Technician is responsible to ensure food safety and quality of plant through enforcement of HACCP, and Good Manufacturing Practices (GMPs) are followed by all personnel and to confirm each product meets specifications and quality parameters. Essential Job Functions: Performing pre-operational inspections at beginning of shift or production line changeovers to achieve on-time start-up and first-time quality. Collect raw material samples upon receipt and report any discrepancies to Quality Manager. Verify correct raw materials and packaging are being picked, staged, and used in production. Determine the acceptability of products using visual inspections, sampling, and testing protocols (when necessary). Perform detail-oriented tasks to support production such as checking legible lot codes, “best by” dates, container seals, handling production line rejects, etc. Enforce good manufacturing practice Provide support to the production department to minimize downtime and run efficiently. Maintain orderly paperwork and verify accurate documentation among production, quality, sanitation, maintenance, warehouse, and R&D departments. Organize production and quality records by following established protocol. Perform, log, and verify metal detector checks and provide training to production coworkers. Escalate issues of non-conforming products in a timely manner to management and segregate or place on hold. Interact and support cross-functional department personnel and adapt to change in a fast-paced environment. Ability to work with minimum supervision. Follow and enforce personal safety procedures and escalate to management. Other duties as assigned. This position has no direct reports but may assist in training coworkers and/or covering absences. This describes just some of the main duties, activities and responsibilities for the role which may change at any time with or without prior notice. Skills/Qualifications: 1-2 years of experience in a quality or lab role, preferably within a food manufacturing environment. Knowledge of sanitary food lab techniques and equipment. Able to read Standard Operating Procedures and follow instructions. Able to interpret product specifications. Good communication skills Understand and apply company and customer quality standards. Comfortable working with Microsoft Office and other production or lab information systems as needed. English fluency required, bilingual Spanish a plus. Physical Requirements: Ability to stand in a lab environment, ability to lift 55lbs, and handle food samples in a sanitary manner Sit, use hands & arms, twist, bend, push or pull Walking, standing, stooping, bending, kneeling, pulling, pushing, twisting, climb etc. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Harris Spice reserves the right to revise or change job duties and responsibilities as the need arises. Equal Employment Opportunity Statement Harris Spice is a certified Minority-owned business. Our business is an equal opportunity employer committed to a diverse and inclusive workforce. Applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), age, sexual orientation, national origin, marital status, parental status, ancestry, disability, gender identity, veteran status, genetic information, other distinguishing characteristics of diversity and inclusion, or any other protected status.

Job Details 0T534 CA - El Monte, CA Full Time $29.22 - $35.20 Hourly 2nd ShiftDescription Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: The CMM Quality Inspector by using the Gill Process Documents (i.e.: GPS, GMS, GOS), performs essential duties to meet customer and AS9100 requirements and supports engineers with complex tasks. This position also works on quality-related projects with direction from the Quality Control Manager. Essential Duties and Responsibilities include the following. Other duties may be assigned. Follow company policies and procedures Comprehend and ensure compliance with internal quality documents, and customer specifications Read and understand customer specifications, process standards, drawings (blue prints), ANSI procedures, and industry standards. Coordinate with CNC production to inspect and rework parts in a timely matter. Must be able to setup, program, and operate Coordinate Measuring Machines, both traditional in-place and articulated-arm (Romer) devices. Proficient in reading blueprints, understanding GD&T, and working with associated technical documents. Proficient in the selection of appropriate hand-held and/or surface plate measuring equipment appropriate to the task. Comfortable providing instruction for the development of Inspection employees within the organization. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Education (Required) Functionally capable in the use of Microsoft Office and other basic computer software. Ability to comfortably multitask with minimal supervision. Ability to effectively communicate verbally and in writing Acceptable Vision Test results Hexagon Metrology coordinate measuring machine level 1 Working knowledge of PC-DMIS software ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Who we are: C.R. Laurence Co., Inc. (CRL) is the leading full-service provider of architectural metals, glass fittings and professional-grade glazing supplies. Offering more than 60,000 products, we serve the industry from locations throughout North America, Europe, and Australia. We operate our business to the highest standards of design, quality and customer service. The companies and institutions that depend on us impact the growing fields of glass fabrication, construction, architecture, interior design, and automotive. Their positions as leaders in their own industries mean they demand the highest standards from their suppliers. About the Position: We are currently searching for an experienced and analytical Quality Inspector to join our production department. As the Quality Inspector, you will uphold the safety regulations of our company and oversee the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with technical and math abilities. Responsibilities include, but are not limited to: Perform quality assessments on all incoming material from vendors, outgoing products for shipping and customer complaints. Reject all products and material that fail to meet quality expectations. Read drawings, plans and specifications to understand the requirements of the products and services. Perform Inspection and testing acceptance criteria Measure product dimensions examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence Oversee the production process Resolve quality related issues in a timely manner. Control and maintenance of all quality documentation, such as: creation, review, approval, modification, elimination and distribution. Review, disposition and oversee rework of nonconforming product. Recommend Corrective/ Preventive actions to eliminate the causes of actual or potential non Qualification Requirements: A minimum of 1-year experience in a similar role High School diploma or equivalent qualification Certification in quality control is preferred Good math and technical skills Understanding of quality control standards and testing techniques. Basic computer skills (excel & word) Dependable, organized with ability to prioritize effectively Good communication skills Ability to problem solve, multi-task, attention to detail and work independently What CRL Offers You Highly competitive base pay Paid time off 10 Holidays (inclusive of 2 floating holidays) Market competitive 401(k) match Industry-leading medical, dental, and vision benefits Short-term and long-term disability coverage Life Insurance Employee discounts Health and wellness programs A culture that values opportunity for growth, development, and internal promotion Hourly: $21.15 - 26.44 We are excited to be an Equal Opportunity Employer at C.R. Laurence. We are actively seeking job applicants who reflect a broad representation of differences, including race, ethnicity, religion, sex, sexual orientation, gender identity/expression, physical ability, neurodiversity, age, veteran, family and economic status and background, geographical background and status, and perspective. We believe that the best companies reflect the incredible diversity in viewpoints, backgrounds, and identities of the world in their staffs, and are committed to inclusive hiring across departments and levels. C.R. Laurence Co., Inc. (CRL) is an E-Verify Employer.

Job Description Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 140 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate full-time position opening for a Quality Control Inspector located in City of Ontario, California. Job Summary: The Quality Control Inspector I is responsible for the inspection of x-ray imagining systems and components based on established inspection criteria. Inspections consist of verifying software and hardware functionality. Inspections also include verifying and approving the visual aspects of each unit, paperwork, electrical and imaging inspections. All inspection activities will be recorded on appropriate forms. Essential Duties: • Perform in-line quality inspections to insure product is produced in accordance to documented procedures, work/assembly instructions, and/or drawings. • Perform Final QC inspections as per documented procedures. Properly fill out form F-82-03-06 Final Quality Control Report • Review final QC inspection paperwork and imaging with Quality Control Supervisor or Quality Control Inspector III before release to shipping. • Verify that all paperwork from previous operations are properly filled out before release of product. • Prepares reports of findings and report inspection and test data to the Quality Control Supervisor • Follow daily work assignments as delegated by the Quality Control Supervisor. • Upon successful completion of final inspections, release product to the shipping department. • Perform QC paperwork maintenance assignments such as sorting, filing and copying as determined by the Quality Supervisor. • Assists with QC line inspections, i.e.: Label Placement, QC report, Packaging • Identify the procedure required to conduct quality test and inspections. • Follow inspection procedures as outlined in SOP-82-03 Quality Control Inspections. Line Inspection • Perform line inspection by performing audits of paperwork, labels, and visual inspection of frame & panels. • Perform line inspections as per documented procedures • Operates independently from the production function, to assess and determine quality status of goods at each stage. • Follow up and maintain all documentation regarding incoming inspection Education and Experience: • Strong attention to details, highly organized • Computer literate to include experience in navigating and manipulating file systems • Ability to multi-task and work in a fast paced environment • Effectively deal with personnel from other departments • Ability to read and write in English • High school diploma or equivalent • 0-2 years similar work experience required • Very good understanding of measuring techniques and tolerance call-outs • Proficient in the use of measuring equipment such as rulers and micrometers. • Experienced in visual inspections to determine material defects and paint imperfections Excellent benefit package including 401K plan with Employer Match 11 Paid Holidays, 10 PTO Days, Free Donuts on Fridays, Company Luncheons and year end Party! PLEASE APPLY AT: ************************************************** Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call *************** and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. Powered by ExactHire:185618

TempToFT Are you detail-driven with a passion for precision electronics? Come join the team of a leading electronics manufacturer, and help ensure the highest standards in quality and compliance. Responsibilites • Conduct in-process and first article inspections using customer drawings • Record inspection results and maintain accurate QC documentation • Inspect electronic assemblies and components to IPC and ANSI Class 3 standards • Monitor wave soldering processes and verify operator self-inspections • Use microscopes and precision tools to inspect PCBs and support soldering tasks Required • High school diploma with 5+ years in EMS or OEM electronics manufacturing • Skilled in blueprint reading, assembly instructions, and IPC/ANSI/NASA standards • Experienced in ISO 9001, AS9100, NADCAP environments and AS9102 documentation • Strong English communication; familiar with AOI equipment 23.00 Qualifications High School Diploma/GED 5+ years in EMS or OEM electronics manufacturing

We are seeking a Quality Control (QC) Inspector to join our team in Santa Fe Springs, CA. This is a Temp-to-Hire position, offering an excellent opportunity to grow within a fast-paced, quality-driven environment. As a QC Inspector, you will be responsible for ensuring that materials, processes, and products meet the highest standards of quality. Key Responsibilities: Perform regular inspections of materials using measurement equipment such as micrometers, calipers, and rulers. Ensure work packets are complete, accurate, and GDP compliant; make corrections as needed. Conduct mathematical calculations required to assist in completing inspections. Maintain a high standard of quality control methodologies and inspection techniques. Work closely with the QC Department and Production teams to resolve any issues and improve processes. Qualifications: Experience: Minimum of 2 years of QC experience, with at least 1 year of experience in the Medical Device, Pharmaceutical, or Aerospace industry. Skills: Proficiency with micrometers, calipers, and other measuring equipment. Certifications: HS Diploma or equivalent; knowledge of ISO 13485 and 17025 standards is a plus (but not a requirement). Independence: Ability to work independently with minimal supervision. Attention to Detail: Strong ability to catch discrepancies and ensure compliance with industry standards. What We Look for in a Candidate: Independent worker with the ability to solve problems autonomously. Strong communication skills, both written and verbal. Team-oriented with the ability to collaborate effectively with internal departments. A keen eye for detail and a passion for quality. A proactive, assertive individual who can handle high-stress situations without compromising on quality.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

The Quality Control Inspector is responsible for managing quality against the three stages of production (before, in process and final repairs) of vehicles in accordance with factory and county specifications as well as ensuring vehicles are repaired per estimate and according to county standards. Pay Range: $24.00 - $26.00/hour RESPONSIBILITIES Review approved estimates/supplements against repaired vehicle Notify management of any additional repairs needed Maintain all safety and health personal protective equipment, including respirators, in the manner recommended by the equipment manufacturer Ensure full use of all required safety and health personal protective equipment across all locations for the contract Comply with all laws and regulations pertaining to paint, thinners and other hazardous materials. Reports any deviations to management Cooperate and assist other personnel in the repair and prepping of vehicles Understand, keep abreast of and complies with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operate all tools and equipment in a safe manner Other duties as assigned QUALIFICATIONS High School Diploma or equivalent required One-year certificate from college or technical school; or 3-6 months related experience and/or training (or equivalent combination of education and experience) Must have 1 year of work related experience Must have a valid Driver's License Must have the following Certifications: Damage Analysis and Estimating Certification for Collision Repair I-CAR Effective oral and written communication skills with all levels of the organization Strong organizational skills with the ability to manage time and multiple priorities to completion Problem solving skills with an analytical thought process Ability to adapt to a rapidly changing environment Must be able to lift, lower, carry, push or move objects up to 50 lbs. Various tasks may require intermittent standing or prolonged sitting, and the ability to walk, reach, kneel, crouch and handle work related supplies and tools. Additional details related to physical requirements may be outlined in the Company's Performance Work Statement or Contract with the client. BENEFITS Constellis offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects its commitment to creating a diverse and supportive workplace. Medical, Vision & Dental Insurance Paid Time-Off Program & Company Paid Holidays 401(k) Retirement Plan Insurance: Basic Life & Supplemental Life Health & Dependent Care Flexible Spending Accounts Short-Term & Long-Term Disability Personal Development & Learning Opportunities On-the-job Training, Skills Development & Certifications Employee Referral Program Corporate Sponsored Events & Community Outreach WORKING CONDITIONS Work is typically based in a busy service center/maintenance garage environment and subject to frequent interruptions. Frequent work outside and in inclement weather conditions is required, including heat, cold and humidity. May be exposed to fumes or airborne particles, toxic or caustic chemicals and vibration. Must be willing to wear Personal Protective Equipment as required by established Company Safety Standards. Normal work hours are Monday-Friday 6:00 am to 2:30 pm, however some extended or weekend hours may also be required.

About Us Hydrafacial is a global category-creating company focused on bringing innovative products to market and delivering beauty health experiences by reinventing our consumer's relationship with their skin, their bodies and their self-confidence. Every person here is a key player in our success. We are firm believers in making the little things count each day so the big things will follow. If this sounds like you, come check us out! This is the perfect opportunity to work with some of the best leaders in the industry while you gain the global and strategic experience to add to your professional toolbox. Job Description: The Quality Control Inspector - Inspection is responsible for performing inspections and testing activities throughout the manufacturing process to ensure compliance with quality standards. This role includes conducting First Article Inspections (FAI), Incoming Quality Control (IQC) In-Process Quality Control (IPQC), and Final Quality Control (FQC) inspections, and maintaining detailed inspection records. The Quality Control Inspector will collaborate with cross-functional teams to address quality and safety issues and contribute to continuous improvement initiatives. This is an on-site position based in Long Beach, CA and requires on-site presence five days a week. This is a full-time role with a schedule of Monday-Friday, 6:00 AM to 02:30 PM or 7:00 AM to -3:30 PM or 08:00 AM to 04:30 PM. What you'll do: Primary Responsibilities: * Perform inspection and testing activities during First Article Inspections (FAI), manufacturing processes, and Incoming Quality Control (IQC), In-Process Quality Control (IPQC), and Final Quality Control (FQC) inspections. * Generate detailed and accurate inspection data sheets in compliance with current Good Manufacturing Practices (cGMP) and Hydrafacial Quality Management System (QMS) requirements. * Properly document inspections, prepare first article documentation, and compile certification packages. * Conduct product build documentation reviews and end-item data package reviews. * Generate nonconformance reports for discrepancies found during inspection processes. * Utilize conventional inspection tools such as calipers, gauges, etc., to ensure precise measurements. * Ensure all inspection equipment is qualified and calibrated before use. * Interpret engineering drawings and specifications accurately. * Conduct visual inspections to identify defects or non-conformities in products. * Collect and analyze quality data to identify trends and areas for improvement. * Collaborate with cross-functional teams to address quality issues and drive continuous improvement initiatives. * Maintain accurate documentation of inspection results and quality records. * Participate in continuous improvement initiatives to enhance product quality. * Report quality related issues to leads and managers in a timely manner. * Adhere to all company safety procedures and perform job functions in a safe and effective manner. * Performs other duties as assigned What you need to know: Experience/Skills/Education: Required: * High school diploma or equivalent; technical training or certification in quality inspection is a plus. * Minimum of 2-3 years of experience in a quality inspection role within a manufacturing environment. * Proficiency in using conventional inspection tools such as calipers, micrometers, and gauges. * Strong understanding of GDP, cGMP, and QMS requirements. * Ability to read and interpret engineering drawings and specifications. * Experience with generating nonconformance reports and inspection documentation. * Strong analytical and problem-solving skills. * Excellent attention to detail and organizational skills. * Basic understanding of ERP systems, Micro Office, etc. * Ability to work independently, cross train, and collaborate professionally in a team environment. * Experience with handling pallet jacks and other various moving equipment. * Manufacturing environment with exposure to machinery, equipment, and various temperatures. * Requires bending, twisting, heavy lifting, pulling/pushing, standing, sitting, reaching, and walking handling inspection tools for extended periods. * Must adhere to all safety guidelines and wear the required personal protective equipment (PPE). * Must be able to lift and move 50lbs. Desired: * Associate degree or higher in a related field preferred. We mean it when we say you'll LOVE this role. Base Pay : $20.00- $23.00/hour Hydrafacial is proud to be an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, sex, religion, sexual orientation, national origin, gender identity, gender expression, age, disability, genetic information, pregnancy or any other protected characteristic as outlined by color, federal, state or local laws. We are committed to working with and providing accommodation to applicants with physical and mental disabilities. Hydrafacial does not accept unsolicited assistance or resumes/CVs from third party search firms. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral or CV/resume submitted by a search firm to any employee at our company without a valid written search agreement. If we need additional support, we will be sure to reach out directly to one of our preferred providers. Please no phone calls or emails.

Job Description Quality Control Inspector W2 Contract to Hire Long Beach, CA $23/hr + Benefits. Weekly Pay! The Quality Control Inspector plays a key role in ensuring products meet established quality standards throughout the entire manufacturing process. This position is responsible for performing inspections and testing activities-including First Article Inspections (FAI), Incoming Quality Control (IQC), In-Process Quality Control (IPQC), and Final Quality Control (FQC)-while maintaining accurate and detailed inspection records. In this role, you will collaborate with cross-functional teams to resolve quality or safety concerns and contribute to ongoing continuous improvement initiatives. This is a full-time, on-site role based in Long Beach, CA, requiring on-site presence five days a week. Available schedules include: • Monday-Friday, 6:00 AM-2:30 PM • Monday-Friday, 7:00 AM-3:30 PM • Monday-Friday, 8:00 AM-4:30 PM Primary Responsibilities • Perform inspection and testing activities during FAI, IQC, IPQC, FQC, and throughout various manufacturing processes. • Generate accurate, detailed inspection data sheets in alignment with cGMP and Hydrafacial Quality Management System (QMS) requirements. • Properly document inspections, prepare first article documentation, and compile certification packages. • Conduct product build documentation reviews and end-item data package reviews. • Generate nonconformance reports for discrepancies identified during inspections. • Use conventional inspection tools-such as calipers, gauges, micrometers, etc.-to ensure precise measurements. • Verify inspection equipment qualification and calibration prior to use. • Read and interpret engineering drawings and specifications accurately. • Conduct visual inspections to detect defects or non-conformities in products. • Collect and analyze quality data to identify trends and improvement opportunities. • Work closely with cross-functional teams to address quality issues and support continuous improvement initiatives. • Maintain accurate documentation of inspection results and quality records. • Participate in continuous improvement projects to enhance product quality. • Report quality-related issues to leads and managers in a timely manner. • Follow all company safety procedures and perform duties in a safe, effective manner. • Perform other duties as assigned. Required • High school diploma or equivalent; technical training or quality inspection certification is a plus. • 2-3 years of experience in a quality inspection role within a manufacturing environment. • Proficiency with conventional inspection tools such as calipers, micrometers, and gauges. • Strong understanding of GDP, cGMP, and QMS requirements. • Ability to read and interpret engineering drawings and specifications. • Experience generating nonconformance reports and inspection documentation. • Strong analytical and problem-solving skills. • Excellent attention to detail and organizational skills. • Basic understanding of ERP systems and Microsoft Office. • Ability to work independently, cross train, and collaborate professionally in a team environment. • Experience handling pallet jacks and other material-moving equipment. • Comfortable working in a manufacturing environment with exposure to machinery, equipment, and varying temperatures. • Ability to perform physical tasks such as bending, twisting, lifting, pulling/pushing, standing, sitting, reaching, walking, and using inspection tools for extended periods. • Must adhere to all safety guidelines and wear required personal protective equipment (PPE). Desired • Associate degree or higher in a related field preferred. TCWGlobal is an equal opportunity employer. We do not discriminate based on age, ethnicity, gender, nationality, religious belief, or sexual orientation.

"At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are core values. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us." JOB SUMMARY To interpret engineering data such as drawings and specifications and inspect in accordance with the data. Must be able to use standard measuring equipment such as calipers, micrometers, height gages, dial indicators etc. Perform visual and dimensional inspections for receiving, in process, final and first article inspections on aviation parts from details to top assemblies. Must be able to understand visual and cosmetic standards. Must have the ability to clearly write nonconformance reports and assist in corrective actions investigations. SUMMARY OF JOB DUTIES Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions * Interpret engineering data such as drawings and specifications * Competent in using measuring equipment such as calipers, micrometers, height gages, indicators. * Perform visual and dimensional inspection * Perform receiving, in-process, final, and first article inspections * Perform inspections to visual and cosmetic standards * Able to write inspection reports and nonconformance reports * Able to understand root cause and participate in corrective actions * Perform review of supplier certifications for conformance to requirements * Data collection for statistical analysis * Must understand and be able to interpret tolerances * Understand application and use of all types of precision measuring instruments used in mechanical inspection, including interpretations of geometrical and positional tolerance requirements. * Travel as required to support suppliers or source/auditing inspection program. GENERAL QUALIFICATIONS - Education, Knowledge, and Experience Education: * A High School Diploma is required. * A two-year college (Associate degree) or ASQ Certification is desired. Experience: * Position may be filled with both entry level and experienced candidates. Skills: Preferred Skills/Experience: Other: * Extended or irregular hours may be required. * Must be authorized to work in the United States. * Boeing EnCore is an "at-will" employer; employment is at the mutual consent of both the employee and the employer, and may be terminated at will for any reason, with or without cause, at any time during employment with the Company. * As business conditions warrant a change in the operating necessities of the Company, all employees are expected to react productively, handle other essential tasks assigned now or in the future. * Tasks may vary slightly based on products produced at a division.

At QIMA, we're on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you'd like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: Check email daily in order to receive inspection documents and guidelines; Attend inspections on time and communicate with supplier in a professional way; Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures; Fulfill inspection reports according with company procedures and time lines. Qualifications Think you have what it takes? First of all, we want someone with: Experience in quality management, especially softlines/ garments/ textiles/ footwear (2 years or more); Knowledge of AQL standards , as well as relevant safety and quality regulations; Good command of English (spoken and written); Great attention to detail and strong professional ethics . Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now and we can write the next chapter of the QIMA story together. Note: This position is open to candidates who work as freelancers in Los Angeles.

ABOUT SANISURE SaniSure is a multinational manufacturer of single-use bioprocessing solutions (SUT) used in the production of biological drugs, including monoclonal antibodies, cell therapies, gene therapies, and vaccines. With operations in the U.S. and in Europe, SaniSure operates a leading platform of vertically integrated critical fluid management technologies and integrated solutions. Its single-use products and system solutions are sold to global pharma and biotech companies and are used from R&D through full-scale commercial cGMP manufacturing of among the most innovative large molecule therapeutics and vaccines. This role is expected to be on-site. We continue to be on a robust growth trajectory, via both organic and inorganic growth, as the company capitalizes on increasing global demand and continues its transition from a component manufacturer to an integrated systems and solutions provider. Our primary offering includes high-value assembly solutions and a portfolio of market-leading products, including PharmaTainer bottles and carboys and related assemblies, Mixed4Sure mixing solutions, Flex4Sure bags and bag assemblies, Fill4Sure needles and needle assemblies, fittings, clamps and a wide range of silicone, braided and thermoplastic tubing solutions. The company has a growing portfolio of innovative solutions serving fast-growth applications, such as cell and gene therapies. SaniSure is a high-growth, nimble and innovative company with a strong customer and market focus. Join us and grow your career at SaniSure! SUMMARY : Performs quality control inspections in all aspects of operations, checks, and test during the manufacture of products. Inspect incoming materials, and products at different stages of production. Records observations and make recommendations for improving processes. Shift 7:00 to 3:30 pm. ESSENTIAL FUNCITONS: Responsible for all activities involving quality inspections and compliance with applicable regulatory requirements; Initiate nonconformance reports (NCR). Performs all aspects of testing related to manufacturing. Incoming inspections In-process inspection. Final Inspection release of finished goods. Document review. Supports cross functional departments investigate potential non-conformance's observed Ensures that all inspections and procedures are properly completed and documented. Perform pre and post-inspection of product gamma irradiation process. Approve or reject raw materials with respect to quality standards and communicate results to all pertinent parties. Initiate nonconformance reports (NCR) for all non-conforming material identified throughout operations Prepare and submit Metrics reports to the quality supervisor or QC lead Comply with all safety requirements ensuring work areas meet standards. May be required to report to multiple facilities within a 2-mile radius. Job Order document review and release Other duties as assigned QUALIFICATIONS High School Diploma or equivalent with 2+ years of experience in quality control inspections. Understanding of global pharmaceutical product regulations with experience with ISO 9001 and/or 13485:2003 and 21 CFR Parts 210 and 211 and/or Part 820. Demonstrated ability to perform GMP operations following detailed SOPs, maintaining training, and good documentation practices. Minimum of 0-2 years' experience with technical documentation for quality activities. This experience should be in the areas of the Quality manufacturing that includes quality inspections and corrective actions in a pharmaceutical or medical device environment. Solid organizational and planning skills required. Ability to communicate effectively, verbally and in writing, demonstrate good interpersonal skills interdepartmentally and with external vendors and contractors. Must be able to work effectively and efficiently in a team environment. Must have the following personal attributes: integrity and trust, work ethic, sound judgment, intellectual honesty, pragmatism, courage and conviction. Must display personal accountability for results and integrity. Must display eagerness to learn and continuously improve. Must have uncompromising dedication to quality. Good general mathematical skills. General knowledge and use of measuring devices such as calipers, tape measures, rulers, pin gauges Equal Opportunity Employer We are committed to providing equal employment opportunities to all employees and applicants without regard to race, ethnicity, religion, color, sex (including childbirth, breast feeding and related medical conditions), gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship status, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability or any other protected status in accordance with all applicable federal, state and local laws.

Meet the Owned Brand division of REVOLVE: REVOLVE is the next-generation fashion retailer for millennial and Generation Z consumers. As a trusted, premium lifestyle brand and a go-to source for discovery and inspiration, REVOLVE delivers an engaging customer experience from a vast yet curated offering of over 45,000 products. Founded in Los Angeles in 2003 by co-CEOs, Michael Mente and Mike Karanikolas, REVOLVE's family of brands includes their luxury offering, FORWARD by Elyse Walker, and a portfolio of 24 owned brands such as Lovers + Friends, Tularosa, NBD and RAYE. The Owned Brand division within REVOLVE is an industry-leading fashion design and production house based in Los Angeles. Leveraging the power of REVOLVE's data driven merchandising, combined with raw creative talent results in an unparalleled ability to identify a specific market niches, developing brands that each have their own identity, designed with a distinct consumer interest and personality in mind. At REVOLVE the most successful team members have the thirst and creativity to redefine fashion retail for the 21st century, making REVOLVE THE leading online retail destination targeted towards Millennial and Generation Z consumers seeking premium fashion. With a team of 1,000 strong, we are a dynamic bunch that are motivated by getting the company to the next level. It's our goal to hire high-energy, diverse, bright, creative, and flexible individuals who thrive in a fast-paced work environment. In return, we promise to keep REVOLVE a company where inspired people will always thrive. Some of the sweetest perks we offer aren't in a typical benefit package like hefty discount on items we carry - as in 50% or more off retail prices, free weekly lunches, and pretty rad company parties. To take a behind the scenes look at the REVOLVE “corporate” lifestyle check out our Instagram @REVOLVEcareers or #lifeatrevolve. Are you ready to set the standard for Premium apparel? Main purpose of the Owned Brands QC Inspector role: This is a full time role for a candidate who can identify the most effective defect recovery process for each item to minimize monetary loss of defective merchandise. He or she will be heavily involved in the QC process through the speccing of garments, evaluation of garments, and providing insight on different garment issues. This is a permanent full time role for a candidate who is able to work in a fast paced, high volume, sku intensive environment while maintaining accuracy. Major Responsibilities: Essential Duties and Responsibilities include the following. Other duties may be assigned. • Accurately spec garments • Document defects into current systems • Comprehend and analyze reports to identify areas of opportunities • Effectively communicate issues to all involved parties • Communicate and interact with all cross functional departments, for pulling, mending, Returns, and any other follow ups as needed • Update QC Tracker, and other relating reports on daily basis • Minimize monetary loss of defective merchandise through defective recovery process • Identify the most effective defect recovery process for each item - RA, Restore, Sellable Defect, Other • Identify defects by inspecting defective apparel • Clearly communicate with Technical Design Team regarding defective and unacceptable merchandise • Travel as needed to the Cerritos location • Complete ad-hoc tasks and assignments as directed by management Required Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Ability to spec garments • High level of attention to detail and the ability to identify apparel construction flaws • Hands-on approach at recommending “how-to-fix” solutions quickly and efficiently • High level of apparel construction and fabrication knowledge • Strong communication, prioritizing and organizational skills • Ability to take ownership of assigned tasks and meet responsibilities without supervision • Ability to work successfully with any personality type and be a team player • Sense of urgency and ability to maintain performance quality under pressure • Flexible and adaptable to a very fast-paced environment • Must be able and willing to lift and carry up to 10 lbs., perform frequent repetitive finger, hand and wrist motions, as well as, bending, stooping, reaching, squatting, kneeling, pushing, and pulling • Must be able to sit for extended periods of time Minimum Qualifications: • Minimum 5-7 years' experience working in a QA/QC, Production or Warehouse environment required • Computer literate in Excel, Word and Email required • Technical fashion, garment construction and fabrication knowledge preferred Preferred Qualifications: • Bilingual highly preferred; proficient in English A reasonable estimate of the current base hourly/salary range is $18/hr to $19/hr. ATTENTION: After submitting your application, please check your spam folder for emails on your application status. Emails are sent from an ADP email address.

Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: * Perform inspection of materials, processes and final product, per business need. * Generates inspection reports according to AS9100 requirements. * Enter inspection data into systems. * Utilizes inspection tools including calipers, gauges and testing equipment (CMM). * Reads and interprets drawings, procedures and work instructions. * Identifies areas for improvement in inspection processes and coordinates implementation. * Comply with all safety requirements; participate in safety training/practices. Qualifications: * 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. * Understanding of QA requirements, processes, practices and systems. * Demonstrated ability to work in team-based environments. * Ability to read engineering drawings to determine and measure features and tolerances. * Strong written and verbal communication skills in English. * Software experience; Excel, Word, Power Point, etc. * Bilingual - English/Spanish Perks and Benefits: * Desired first shift schedule * Premium Health Insurance - $0 employee premium & $0 deductible * Company provided life insurance for all employees with $0 employee contribution * Dental * 10 paid holidays * 5 paid sick days * Accrued vacation * 401(k) * Profit Sharing * Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.

SPT Labtech is a global supplier of innovative lab automation products for the life science markets. Our solutions save time and material costs and simplify complex operations. We are natural innovators. We create, design and manufacture high quality, robust and innovative automated laboratory equipment for academic, pharmaceutical and biotechnology research. We are looking for a talented Quality Control Inspector to join our growing team. You must have the ability to work on complex products and to work collaboratively and flexibly across several inter-disciplinary teams. Inspector Job Responsibilities: Inspect and approve incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Inspect in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor. Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work. Reject all in-coming materials, in-process production, and finished goods products that fail to meet quality standards by specifications or quality criteria through non-conformance process. Assists Quality team members or management with failure and nonconformance data recording and reporting Prioritizes schedules based on product introduction and manufacturing schedules, maintaining a minimum turnaround time. Accomplishes quality and organization mission by completing tasks and responsibilities as needed. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations. Support the engineering manager or take ownership in resolving quality-related issues in a timely manner Recommend improvements to the production and quality control inspection process to ensure quality control. Be a team member of the quality department and support Production, Engineering and other internal departments to further the interests of the company as a whole. Requirements Written and verbal communication skills Experience with inspecting electromechanical assemblies, machined and metal fabrication highly desired. CMM experience a plus Basic math skills Excellent computer skills to include use of MS Office Attention to detail Analytic skills Documentation skills Time management skills Flexibility and able to change priorities on short notice based on production demands Hand/eye coordination Reporting skills Blueprint reading Education and Experience Requirements: High school diploma Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments One to two years' quality inspector experience Knowledge of ISO and QMS is highly desired Benefits 401(k) Health insurance Dental insurance Vision insurance Paid time off SPT Labtech is committed to a diverse and inclusive workplace. SPT Labtech is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.